Search Results

Search found 3240 results on 130 pages for 'groupwise maximum'.

Page 39/130 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Question about VMWare thin provisioning

    - by Datapimp23
    I'm playing around with virtual disks and thin provisioning and have a question about it. I've created several disks and allocated space to with thin provisioning. Is it possible to allocate more disk space than the maximum amount of the datastore space. So that for example, my VM's will stop functioning when the disks slowly start filling up?

    Read the article

  • SSH tunneling hangs with many connections

    - by middleofdreams
    I am forced to use SSH tunneling to access many servers (over 100) via one gateway server. To keep connection alive I am using autossh. Everything works pretty well until there is high traffic (people are connecting to most of the servers at once). then ssh process reaches 12% of cpu (which is configured maximum for separate process) and no connection is working anymore - i have to restart autossh script. What could be the possible reason for that?

    Read the article

  • Windows Server 2008 R2 - 180 day evaluation vs. 10 days + 5 re-arms

    - by Rob
    The content on the Server 2008 R2 Trial Software page states that it can be evaluated for upto 180 days, however on a test machine we installed last week, it's requesting "re-arming" every 10 days, which seems to be do-able a maximum of 5 times? How do we get it to last more than 50 days, as it'd be a pain to have to rebuild the server concerned!

    Read the article

  • How to stream TV/Films/Music over the internet to various devices from a home server?

    - by ritch0s
    Set up: An always on old-ish laptop connected to a NAS which contains TV/Films/Music. I want to be able to stream on the fly the data on my NAS to various connected devices such as iphone or laptop. I am currently using Orb (orb.com) mycast software but the requirements for the streaming are very high in terms of processing power is there alternative software and dedicated hardware i can add to get maximum benefit from this setup?

    Read the article

  • What is the most Linux friendly video card chipset/manufacturer on the market?

    - by rrc7cz
    I've wasted an absurd amount of time trying to get my nVidia card to function properly in Linux (Ubuntu & Fedora). I've decided to purchase a new video card that will "just work" with any Linux I throw at it. Making things even easier, I'm not a gamer, though I do appreciate some of the 3D or alpha blending effects seen in modern GUIs. What cards and/or manufacturers do you recommend for the maximum acceleration with minimum problems?

    Read the article

  • Nvidia Drivers on Debian / Lenny (Stable) -> Installation successful -> Monitors gets black

    - by David
    I have successfully installed the proprietary drivers for my nvidia (geforce 7300 gt) graphics card on debian/lenny. I know its not the best way to chose for driver installation ( see this link: http://wiki.debian.org/NvidiaGraphicsDrivers#non-freedrivers ). but the two ways seem to be possible for me (nvidia-kernel module compilation). Now the problem is that the monitors gets black, the power light starts blinking after i launch the x-server. Have a short look a the logs (output truncated from /var/log/Xorg.0.log): (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Jul 28 17:10:11 NVIDIA(0): Enabling RENDER acceleration (II) Jul 28 17:10:11 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Jul 28 17:10:11 NVIDIA(0): enabled. (II) Jul 28 17:10:11 NVIDIA(0): NVIDIA GPU GeForce 7300 GT (G73) at PCI:1:0:0 (GPU-0) (--) Jul 28 17:10:11 NVIDIA(0): Memory: 262144 kBytes (--) Jul 28 17:10:11 NVIDIA(0): VideoBIOS: 05.73.22.25.00 (II) Jul 28 17:10:11 NVIDIA(0): Detected PCI Express Link width: 16X (--) Jul 28 17:10:11 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Jul 28 17:10:11 NVIDIA(0): Connected display device(s) on GeForce 7300 GT at PCI:1:0:0: (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0) (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): 165.0 MHz maximum pixel clock (--) Jul 28 17:10:11 NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Single Link TMDS (II) Jul 28 17:10:11 NVIDIA(0): Assigned Display Device: CRT-0 (==) Jul 28 17:10:11 NVIDIA(0): (==) Jul 28 17:10:11 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Jul 28 17:10:11 NVIDIA(0): will be used as the requested mode. (==) Jul 28 17:10:11 NVIDIA(0): (II) Jul 28 17:10:11 NVIDIA(0): Validated modes: (II) Jul 28 17:10:11 NVIDIA(0): "nvidia-auto-select" (II) Jul 28 17:10:11 NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) Jul 28 17:10:11 NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config (--) Jul 28 17:10:11 NVIDIA(0): option (==) Jul 28 17:10:11 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp Here is the complete /etc/X11/xorg.conf file as generated by nvidia-xconfig: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" Hor

    Read the article

  • monitoring services, CPU, memory remotely on a Windows server machine

    - by ToastMan
    I'm looking for a tool that is able to (remotely) monitor CPU and Memory in a Windows server but most importantly, which service/process is using it. Or-- is it possible to monitor a specific running service? We got a server that freezes on regular basis and we're trying to find the culprit without using a local debugger. Would be great if the monitoring software came with an agent that we can install on the remote clients for maximum accuracy. Any suggestions are very much appreciated.

    Read the article

  • how to close open ftp connections?

    - by KnockKnockWhosThere
    I use FileZilla, and I thought when a session ended, it automatically closed the ftp connection, but that doesn't appear to have happened because now I'm getting a "530 Sorry, the maximum number of connections (10) for your host are already connected." error. Is there a way to find any open ftp connections and close them from my end? Or, do I have to contact the host?

    Read the article

  • Limit PulseAudio volume to prevent overdrive

    - by el.pescado
    Is it possible to limit maximum volume in PulseAudio? Currently, PulseAudio sets PCM channel too loud which results in distorted sound. I use aumix to turn volume down, but whenever any other sound is played (IM notification etc), PA plays with knobs, turning master volume down and PCM up. aumix ++++++++++++++++++++O+++++<Vol ++++++++++++++++++++O+++++ Pcm ++++++++++++O+++++++++++++ becomes: aumix ++++++++++++++++O+++++++++<Vol ++++++++++++++++++++++++O+ Pcm ++++++++++++O+++++++++++++ I use OpenSUSE 11.2, pulseaudio 0.9.21, ALSA 1.0.21 and ALC889A sound codec.

    Read the article

  • Multiplt session in win 2003

    - by Iyad
    Hi; as far i know the rdp session is 2 session maximum in win 2003, is there any way i can connect 3 remote session concurrently ? also i tried many times to connect using the console mode, but it seem like i have only 2 session 1 console and 1 using the regular terminal services rdp session ?

    Read the article

  • Does the size of monitor Matters ?

    - by Arsheep
    I have a old computer , i want to buy a big LCD now the best i can found is Viewsonic's 24" lcd TFT monitor . So will it run without any problems or i need to upgrade the video cards or something too ? The computer is not that much old it has P4 bord and celeron processor with 128 graphics memory . And in properties it shows i can maximum use 1280 x 1024 resolution. I am noob hardware wise So need help on this stuff. Thanks

    Read the article

  • Does the size of monitor Matters ?

    - by Arsheep
    I have a old computer , i want to buy a big LCD now the best i can found is Viewsonic's 24" lcd TFT monitor . So will it run without any problems or i need to upgrade the video cards or something too ? The computer is not that much old it has P4 bord and celeron processor with 128 graphics memory . And in properties it shows i can maximum use 1280 x 1024 resolution. I am noob hardware wise So need help on this stuff. Thanks

    Read the article

  • Verizon FiOS Speed concerns

    - by Josh K
    I'm working on getting a separate internet connection to run out and I was looking into available options. FiOS claims to offer 25Mb up / 25 Mb down as a maximum rate. Do they have listed minimum rates? Is there anything with fiber I should be concerned about? Special hardware, special routers, availability concerns?

    Read the article

  • Restrict SMB user from changing password

    - by Canadian Luke
    On a server running Debian Wheezy and Samba ver 3 with a tdb backend, how do I restrict a single user from changing the password? This account is one of 2 generic accounts, one for students and one for Teachers on Call (TOC). The users are created, but I'm not deploying the server yet. When looking through Google, I came across setting the maximum password age, but not setting the minumum password age (I'd be happy with a 5 year password...)

    Read the article

  • how many tables can an MS SQL database hold?

    - by Peter Turner
    I've ran into this cryptic statement for SQL Server: Files Per Database 32,767. What does that mean exactly? Is there a maximum number of tables for a given version of SQL Server. We try to support SQL Server post 2005 32-bit and 64-bit. So if anyone has a handy dandy table they use to figure out how many tables they can have per DB for Microsoft SQL Servers I'd heartily appreciate seeing it.

    Read the article

  • Can I increase Windows 7 start menu vertical size to let mire items fit in it?

    - by Ivan
    I hate putting shortcuts/files on desktop as well as crawling through "All Programs" menu any frequently (and I only pin some essential every-day applications to the task bar). So, I put all the programs I occasionally use to the start menu itself (above the automatic recently used programs section). But even though I've switched it to use small icons, I run out of vertical space in it (just about 16 shortcuts fit there at maximum).

    Read the article

  • Configuring a monitor's contrast/brightess/colours/etc

    - by DMA57361
    I have recently bought myself a new monitor, now I'd had my previous screen well over 5 years now so I'm looking at this one thinking the picture doesn't quite look right (not bad, just different). Rather than just wait until I'm used to the new picture I'd rather get it fine tuned, then get used to it - so I can reap the maximum benefit. So, can you please suggest reliable ways of configuring an LCD monitor's brightness/contrast/colour/etc to provide the optimum possibly quality image?

    Read the article

  • how to optimize apache on web-server

    - by Prakash
    how can I optimize the server with following configuration. It takes too much time to load a page. IBM X3200 M3 Server - 1 Intel Xeon Processor with 4 GB Ram Below is my current configuration for apache: Start Servers: 5 (Default) Minimum Spare Servers: 10 Maximum Spare Servers: 20 Server Limit: 500 Max Clients: 500 Max Requests Per Child: 10000 (Default) Keep-Alive: On Keep-Alive Timeout: 5 Max Keep-Alive Requests: 100 Timeout: 200

    Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >