Search Results

Search found 19125 results on 765 pages for 'hard disk'.

Page 39/765 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

  • Hard drive had reallocated sectors...but now it magically doesn't! Can I trust it?

    - by rob
    Last week my SMART diagnostics utility, CrystalDiskInfo, reported that the external hard drive that I was saving my backups to had suddenly reported 900+ reallocated sectors. I double-checked to confirm, then ordered a replacement drive. I spent all of this week copying data from that drive to the new drive. But toward the end of the copy, something peculiar happened. CrystalDiskInfo popped up an alert that the reallocated sector count had gone back down to 0. I know that when SMART detects a read error on a block, it adds that block to the current pending reallocation list. If it subsequently is successfully written or read later, it is removed from the list and assumed to be fine, but if a subsequent write fails, it is marked bad and added to the reallocated sector count. What concerns me most is that I've never read anywhere that a sector can be recovered as "good" after it has been marked as a bad sector and remapped. I've just finished running an extended SMART diagnostic, and it found no surface errors. Now I'm doubtful that the manufacturer will honor a warranty claim if the SMART info does not report any problems. Has anyone had this happen? If so, then is the drive, indeed, okay, or should I be concerned about an imminent failure?

    Read the article

  • How would I force Debian to use the physical sector size on a hard disk?

    - by Confused User
    I just purchased a few new 3TB WD drives. These have physical 4k sectors, but there is some sort of layer which is providing 512B logical sectors (see the partition table below). In order to attempt to get some more speed out of my hard drives, I would like to get rid of this logical layer and actually use the physical 4k sectors. However, I can't figure out how to do this (or even if it's possible) from the man pages of fdisk and parted, or from searching Google. Does anybody know how this could be done? As to why this is relevant, this page demonstrates that meerly aligning the sectors properly can already make up to a 25% speed difference for reads, and more than 2500% for writes in some cases! Getting rid of the logical sectors in favor of the physicals ones should improve speeds even more. Thanks! $ parted /dev/sdc GNU Parted 2.3 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA WDC WD30EZRX-00M (scsi) Disk /dev/sdc: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 3001GB 3001GB zfs 9 3001GB 3001GB 8389kB P.S. I don't care about the data on the drives, I was just playing with different file systems. Also, this is my first time posting here, so please let me know if my posts should be formatted differently, etc.

    Read the article

  • Can I clone my hard drive to an external and boot from the clone?

    - by willbuntu
    First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

    Read the article

  • HFS+ hard drive being mounted as read only

    - by DNA
    This is a recurring problem and occurs a few times a week. I have an external hard drive which is hfs+. Every couple of weeks, for no obviuous reason, when I mount it by pluggin it in to my Ubuntu 11.10, it is read only and I can't copy any files into it. I gksudo nautlius and change the ownership and it magically works in some time. But returns to the read only state soon in a few hours-days without any rhyme or reason. Right now my fstab doesn't have any entry for my hard drive. What gives? What in the world is going on with Linux/HFS+? This is frustrating. I can't reformat my hard drive because I have almost a terrabyte of data in it and no receptacle to hold it while I reformat it.

    Read the article

  • Using GParted to rescue data and format hard drive to NTFS

    - by Ishan
    I'm having problems booting to Windows XP due to bad sectors on the hard drive. I've tried fixboot and fixmbr from the recovery console. That only made matters worse. Now I want to use GParted to attempt data rescue and format the hard drive to NTFS. Unfortunately, I get an error (Picture 2) when trying to recover my files, and the option to format the hard drive is grayed out. The only thing I can do is create a new partition. When I click "view" I get the "Unable to open the default file manager" error

    Read the article

  • Windows 7 can't boot with Ubuntu on different hard drive

    - by dellphi
    I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. output of fdisk -l grub.cfg. I want to retain Grub to remain on the second HDD, and Windows 7 could choose from the menu provided by Grub. But I do not get how, I hope anyone can help.

    Read the article

  • Moving Ubuntu to a new hdd

    - by jaurisan
    I have a 300gb hdd which I am currently using on my older PC. Now I want to have a copy of those 300GB into a new 1TB hdd (installed in a new computer). My "problem" is that the 1TB hdd already has a 50GB partition with a Win XP (the rest of the space is not partitioned). The 300GB disk has a 240GB partition for Ubuntu, and the rest is a FAT partition which I don't care if it gets copied or not to the new disk. So how can I transfer the entire Ubuntu to the new hard disk and still being able to boot the XP? Is there a way or tool that can help me do over LAN? So I wont have to take out the hdd from the new pc and put it in the older to do the copy.

    Read the article

  • Can't mount external hard drive

    - by tezza
    i have a problem accessing the data on my external hard drive. I recently did a fresh install but mistakenly left my external hard drive plugged in. When I tried to access the data on the external HDD, it says "no files" but recognizes that there is 290 GiB of data on it. The HDD is 350GB big. I checked the drive with Disk Utility and it showed that the hard drive had a bootable flag. So, in the edit partition, I unchecked this bootablity. Now it won't mount in Ubuntu and now my XP can't recognize it at all, whereas I could access the data on the XP machine before. In disk utility, it doesn't give me the option to check the bootable box in again and I can't access the data on XP either. Any ideas on how to fix it?

    Read the article

  • new hard drive on Dell Adaptec 2610SA 6 port SATA RAID PCI card

    - by Ragnarok85
    I have a Dell Adaptec 2610SA 6 port SATA RAID PCI card with 3 hard drives on it and everything works fine. I plugged another hard drive to it and the system (Ubuntu 12.04, 64 bit) seems not to recognize it. Strange thing is that, as happened in the past, if I re-install the system, it recognizes the new hardware plugged to RAID card. Of course I don't want to re-install ubuntu each time I plug a new hard drive on my RAID card. Any idea? Thank you in advance

    Read the article

  • Windows 7 can't boot with Ubuntu on different hard drive

    - by dellphi
    I use a dual boot with two hard disks and two OS is Ubuntu 10.04 and Windows 7. Windows 7 installed on the first disk, first partition. Grub is installed on a second hard disk MBR, and Ubuntu installed on an extended partition on a second hard drive. When I select Windows 7 on the Grub menu, the HDD lamp lights up briefly and then black screen on the monitor, with the status of the keyboard is still functioning. Until now (with the default boot from first HDD), I have to press F12 to get into the Grub to run Linux on a second HDD. output of fdisk -l grub.cfg. I want to retain Grub to remain on the second HDD, and Windows 7 could choose from the menu provided by Grub. But I do not get how, I hope anyone can help.

    Read the article

  • Changing read-write permissions on my external Seagate hard drive

    - by Anthony_JKenn
    I have an external hard drive (Seagate Free Agent) that I normally download files to. I have a dual boot Ubuntu 11.10 along with Windows 7-64 bit. I can read all of my files in my external HD perfectly, but when I attempt to do a download of a file to this drive, I get an "unable to write because of read only" disk error. When I attempt to change the permissions of the disk through the "Properties" bar, I still get an error that I don't have the proper permissions to change permissions. I have heard of "mounting" the disk, but I am afraid of mistakenly reformatting and destroying all the data that I have currently on that drive. How best should I safely change the permissions on that drive so that I can write and download files to the drive?? The drive is listed under /dev/sdc1.

    Read the article

  • How to partition a fully used hard drive

    - by MineCraftMan39
    I installed Ubuntu on my laptop which when I got it I had Fedora 13 installed on it as the OS. Now I want to install Fedora 18 in a dual boot with Ubuntu. Problem is when I installed Ubuntu, I didn't partition for dual boot and I gave the entire hard drive to Ubuntu and no longer have the space to dual boot. How can I lower the partition on Ubuntu to make space on the hard drive for Fedora? I want to split the hard drive 50/50 between the two. Thanks in advance.

    Read the article

  • can't chmod on external hard disk?

    - by G. He
    I have an USB3.0 external hard disk, partitioned to 3 NTFS partitions. When I plug the hard disk in, the 3 partitions automatically mounted under /media. So far so good. I can read and write to files, or mkdir, etc on these partitions. But I can't do chmod/chown on any of the files/directories on these partitions. The owner:group always myself, and the mode are always 700 for directories and 600 for files. I have another partition on internal harddisk also mounted. That partition works fine. I looked the output of mount command, the only difference between mount options is that there is one extra 'default_permissions' on the external hard disks. Anyway I can set the owner:group and mode on these files and directories.

    Read the article

  • usb ntfs pen drive and hard drive not working after connection to ubuntu

    - by lemon619
    as said in the title first of all i connected a usb key (ntfs formatted) with data in it, on ubuntu 12.04, after i disconnected it i was no more able to access the usb key neither from windows nor from ubuntu 12.04. The system asks me to format my usb key Just now i connected a hard drive ntfs formatted with data in it to ubuntu 12.04. I ejected correctly the hard drive and connected it to windows, and the system asks me to format my hard drive? same as the usb key Can someone help me please ? Would really appreciate!

    Read the article

  • Linux disk IO load breakdown, by filesystem path and/or process?

    - by Ryan B. Lynch
    Does anyone have experience with a tool that can provide an indication of disk IO load by filesystem path. I use to 'iostat' utility, frequently, to learn how much disk activity is taking place on a Linux host. 'iostat' provides a per-device breakdown, so you can see activity on a particular block device. But it doesn't go any deeper than that--you can't, for instance, query the write load generated by 'httpd' in the directory '/var/log/httpd/'.

    Read the article

  • Impossible to create/format install window 7 on unpartioned HD

    - by fra pet
    Hi guys i am getting nut reinstalling windows 7 on one of those Acer aspire all-in-one... The original OS(windows professional x64) was not starting, after the initial screen the bios was prompted. So step 1: i tried to access the system partition and reinstall everything but could not get at the point step 2: i set the bios to native ide and i tried to insert my original copy of windows professional and do a clean installation, but it does not allow me to format/create other partion form the installation mask step 3: my BAD, i tried to install ubuntu and i clean the whole hard drive, i was getting an error at some point during installation so i decided to get back to windows step 4: Windows 7 again, at the disk screen of the windows installation i entered into the prompt and played around with DISKPART... -i listed the disk and the HD was disk 0. -i selected disk 0. -i CLEAN disk 0 successfully. -i tried to create a CREATE PARTITION PRIMARY but gave an error cache corrupt and disk not up-to-date (after i try to create a partiton in disk 0 it disappear when i try LIST DISK and i have to restart before he can list DISK 0 again, RESCAN did not worked). -tried CLEAN ALL(2 hours) and succeeded. -try again to create primary partition and failed, same errors -try to install my old copy of windows xP pro and it seems to work, it create a partition, format(only quick worked, slow mode was at 0% after 1 hour so i stop), it start installing and around 90% installation said it could not copy a file and he stop -back on windows 7 again, it says that the hard drive has 490+gb unpartitioned but won't create a partition and format. -i tried again DISKPART as i though i messed up with the MBR when i installed ubuntu, so i did all of the instruction below http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html http://support.microsoft.com/kb/927392 the errors were: on bootsect: the systne partiton was not found, Data error cyclic redundancy check on bootrec /FixMbr: A device attached to the system is not functioning but did not worked, and still can not partiton/format/install on a blank HD i tried some bootable clean disk tool and start infinite loop on the same errors the bios setting are: sata: native ide. if i put AHCL(or something like that does not load the HD and the DVD). quick start/quite start: disabled. Are there any other option or tools i can try before i try change the HD(That is my last option)? Thanks to everyone.

    Read the article

  • Hard drives indication with controller MegaRAID SAS 9261-8i on HP Proliant DL320e Gen8. Is it possible?

    - by ame
    Give me advice, please. My situation: There're the server HP ProLiant DL320e Gen8 and MegaRAID SAS 9261-8i RAID Controller. I installed Controller into server and I reconnected Mini-SAS cord from block of hard drives to controller, but I haven't any indication of hard discs on server front panel. There's indication of activity of drives only during boot of server. Controller has 2-pin connector (JT6B3, SAS Activity LED header) but where and how can I connect it? Thanx.

    Read the article

  • Assign a drive letter to a Solaris disk in a Windows box

    - by Cat
    I need some way to map a UFS Solaris drive (ie, assign a drive letter to it) while it is in a Windows XP box. I've found utilities that will let me transfer files from a Solaris disk to a NTFS disk on the Windows box, but nothing that will let me map/share that Solaris disk. And no, putting the Solaris disk in a Solaris box and using something like Samba to share the disk is unfortunately not an option. Cat

    Read the article

  • Multi device BTRFS filesystem with disk of different size

    - by fokenrute
    I have an existing BTRFS filesystem composed of one 500GB disk and I just bought a 2TB disk to increase the storage capacity of my home server and I want add the new disk to the existing filesystem. From what I read, it seems like no BTRFS setup can handle disk of different sizes without wasting the difference in size between the larger and the smaller disk, but I'm new to BTRFS and I might have missed something, so is there a setup that can allow me to combine two disks in a filesystem without wasting space ?

    Read the article

  • C#, wmi get disk manufacturer

    - by gloris
    Hi, how get USB flash(key) manufacturer name with C#? for example WD, Hama, Kingston... Now i with: "disk["Manufacturer"]", get: "Standard disk driver" string drive = "h"; ManagementObject disk = new ManagementObject("Win32_LogicalDisk.DeviceID=\"" + drive + ":\""); disk.Get(); Console.WriteLine(disk["VolumeSerialNumber"].ToString()); Console.WriteLine(disk["VolumeName"].ToString()); Console.WriteLine(disk["Manufacturer"].ToString());

    Read the article

  • Wipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way

    - by The Geek
    Giving a computer to somebody else? Maybe you’re putting it out on Craigslist to sell to a stranger—either way, you’ll want to make sure that your drive is completely wiped, scrubbed, and clean of any personal data. Here’s the easy way to do it. If you only have access to an Ubuntu Live CD or thumb drive, you can actually use that instead if you prefer, and we’ve got you covered with a full guide to securely wiping your PC’s hard drive. Otherwise, keep reading. Wipe the Drive with DBAN Darik’s Boot and Nuke CD is the easiest way to permanently and totally destroy every bit of personal information on that drive—nobody is going to recover a thing once this is done. The first thing you’ll need to do is download a copy of the ISO image, and then burn it to a blank CD with something really useful like Imgburn. Just choose Burn image to Disc at the start screen, select the little file icon, grab the downloaded ISO, and then go. If you need a little more help, we’ve got you covered with a beginner’s guide to burning an ISO image. Once you’re done, stick the disc into the drive, start the PC up, and then once you boot to the DBAN prompt you’ll see a menu. You can pretty much ignore everything on here, and just type… autonuke And there you are, your disk is now being securely wiped. Once it’s all done, you can remove the CD, and then either pack the PC up to sell, or re-install Windows on there if you feel like it. More Advanced Method If you’re really paranoid, want to run a different type of wipe, or just like fiddling with the options, you can choose F3 or hit Enter at the prompt to head to the advanced selection screen. Here you can choose exactly which drive to wipe, or hit the M key to change the method. You’ll be able to choose between a bunch of different wipe options. The Quick Erase is all you really need though.   So there you are, easy PC wiping in one package. What about you? Do you make sure to wipe your old PCs before giving them away? Personally I’ve always just yanked out the hard drives before I got rid of an old PC, but that’s just me. Download DBAN from dban.org Similar Articles Productive Geek Tips Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveHow to Dispose of Old Computers ResponsiblyHow To Delete a VHD in Windows 7Speed up External USB Hard Drives in Windows VistaSpeed Up SATA Hard Drives in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

    Read the article

  • OS Missing? Messed up the MBR on Win7 64-bit

    - by hom3lesshom3boy
    I have a Windows 7 machine with two hard drives: a 1TB C: drive and 500GB J:. I had Windows XP installed on C: and Windows 7 installed on J:. I installed Windows 7 after Windows XP from an installer .exe I (legally) bought and downloaded. It, and all of my other files, are sitting on my J: drive intact. While under my Windows 7 install, a few days ago I decided to use Priform's CCleaner and use its DriveWipe utility to wipe the C: drive. 1% into the process, I cancelled and attempted to use it again. It gives me an error saying it can't format the drive, so I poke around the Internet a bit, give up, and restart my computer. I first get an "OS is missing" error after the computer boots past the BIOS. I downloaded and put UBCD on a bootable USB to use another drivewiping tool to completely erase the C: drive, hoping it'll take the problem with it. No luck. I try to use TestDisk to make my J: my primary active drive, but no luck. I still get the "OS is missing" error. Or sometimes it'll hang at Verifying DMI Pool. Or sometimes I'll get the "NTLDR is missing" error. I get hold of Hiren's and put it on another bootable USB. I first I tried the Boot Windows 7 from Hard Drive option, and I get "Error 15: File Not Found". I tried the "Fix 'NTLDR is Missing'" option (I'm not quite sure why this is even showing up, since I'm trying to get into a HDD with Windows 7 installed. Probably messed up somewhere when I used TestDisk) and I get this list: I'll run through the error messages I get: 1st Try - Windows could not start because the following file is missing or corrupt: \system32\hal.dll 2nd Try - Windows could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe 3rd Try - Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. 4th - 8th Try - Same as #3 9th Try - I/O Error accessing boot sector file multi(0)disk(0)fdisk(0)\BOOTSEC.DOS. And computer freezes. 10th Try - computer restarts Needless to say, not a single one of those works. I then tried to open up the Windows 7 exe I have sitting on my J: from the Mini-XP OS on Hiren's, but it won't run because I'm trying to run a 64-bit file from a 32-bit exe. At least, that's the problem according to these guys: http://social.technet.microsoft.com/...-b2f54e9c7d18/ I then borrowed a 64-bit Windows Home Premium CD from a friend to get to the recovery options. But I get the error message: This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows. I pressed Shift + F10 to get to the Command Prompt directly. These are the exact steps I took from there (paraphrased a little): X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. I restarted my computer, but it still didn't work. I unplugged the C: drive, then tried bootrec and Diskpart: X:\Sources> bootrec.exe X:\Sources> bootrec /RebuildBcd Total identified Windows installations: 1 [1] \\?\GLOBALROOT\Device\HarddiskVolume1\Windows Add installation to bootlist? Yes(Y)/No(N)/All(A):y The requested system device cannot be found. X:\Sources>DiskPart DISKPART> List Disk Disk # Status Size Free Dyn Gpt Disk 0_Online_465GB_0B_______* Disk 1 Online 1000MB 0B (this is Hiren's on a bootable usb) DISKPART> Select Disk 0 Disk 0 is now the selected disk. DISKPART> List Partition Partition # Type Size Offset Partition 1 System 465GB 31KB DISKPART> Select Partition 1 Partition 1 is now the selected partition DISKPART> Active The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks. DISKPART> exit Leaving Diskpart... X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. Before I go any further, is there anything I'm overlooking/doing wrong? All I care about is making the J: and Windows 7 bootable again. SPECS: Windows 7 Professional 64-Bit GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3R (rev. 2.1) Crucial Ballistix 2048MB PC6400 DDR2 800MHz (2x2GB) Intel Core 2 Duo E6700 Processor (2.6 (6GHZ) I think... not sure anymore C: HDD - SAMSUNG HD103UJ (1TB, not plugged in) J: HDD - WDC WD5000AKS-00V1A0 (500GB)

    Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >