Search Results

Search found 1394 results on 56 pages for 'pci dss'.

Page 39/56 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• 3rd monitor with Dell Precision 490

  - by Animesh Kumar

  I am trying to go for a 3 monitor setup on my workstation, but need some information before I can invest in a new graphics card and 2 monitors. Would be glad to get some help here: I have a Dell Precision 490 workstation with Nvidia Quadro FX 4500 graphics card (PCI-E 16) on it. It has 2 DVI-D ports that can support 2 monitors upto 2560x1600 resolution. For the third monitor, I was looking at Nvidia NVS 295 card, however I am not sure if it is physically possible to hook another card to the motherboard. Here is the spec of Precision 490: http://www.dell.com/downloads/global/products/precn/en/spec_precn_490_en.pdf Can I attach NVS 295 to it? If not, what options do I have?

  Read the article

• Are there open source Linux drivers for the Panda Wifi USB adapter?

  - by Zifre

  I'm looking for a wireless adapter for my new PC. My requirements are: it supports 802.11n it is cheap (under 30 USD) it has good, open source Linux drivers (will work "out of the box") preferably USB, but PCI is okay too I found the Panda Wifi (b/g/n) 150Mbps Wireless-N (802.11n) USB Adapter. It says there is Linux support. However, I want to make sure there are open source drivers included with the Linux kernel. Does anyone know what the chipset for this adapter is? What driver it would use?

  Read the article

• Broadcom BCM5716 Hangs on CentOS 6 Boot

  - by someotherguy

  I have a fresh CentOS 6 installation on a Dell R310 server with a Broadcom BCM5716. The onboard NIC is causing the boot to hang for some reason. Welcome to CentOS Linux Starting udev: udev: starting version 147 Boardcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.23b (Feb 01, 2011) bnx2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 That's it... then it just hangs / freezes. If I disable the NIC via the BIOS settings, CentOS boots fine. I've downloaded and installed the latest driver from Broadcom's website. Any ideas?

  Read the article

• Virtual fiber channel HBA in Solaris

  - by Phil

  We are trying to set up some virtual Fibre Channel HBA's in Solaris. This seems to be possible with NPIV. Creating NPIV's in a Solaris global zone works fine, but passing that NPIV to a zone didn't work at all. We tried to pass the NPIV as following: # zonecfg -z zone1 'info' zonename: studentz1 [...] device: match: /devices/pci@0,0/pci8086,25f9@6/pci8086,350c@0,3/pci1077,140@4/fp@1,0:devctl allow-partition not specified allow-raw-io not specified Wat we want to do is, set up an environment for SAN exercises. We don't have a physical host per student, so we try to virtualise that in some way (Solaris zones or VMware). It should be possible to display the WWN of the virtual HBA and mount the storage presented by the disk subsystem. Any ideas to pass the NPIV to a solaris zone or to virtualise this with vmware?

  Read the article

• Mother Board Question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• Computer wont POST after power outage

  - by aaron

  I had just turned my computer on and windows was loading when the power in my neighborhood went out. Normally, when I turn my computer on, the video card fan spins up, then slows down, POST and windows boots. Now, after the blackout, the video card fan spins fast and wont stop. Nothing is displayed on the monitor. The monitor does not detect that the video card is sending it signals, it just stays on standby. No POST or beep codes. This is what I have tried so far: My motherboard has 2 PCI express slots and I tried plugging the video card into both of them but that didn't fix anything. I have replaced the power supply, that didn't fix anything. I cleared the CMOS, that didn't fix anything. Does anyone have any idea of what could be wrong? Thanks!

  Read the article

• Windows 7 Via Hyperion 4-1 drivers

  - by Gratzy

  I have a clean install of Win 7 on some relatively old hardware. Everything works pretty well however my cpu is pegged at 100% most of the time. Task Manager shows srvchost as being a main culprit of course but also system interrupts. I have a Biostar socket 478 MB with Via chipset. I have tried to find Windows 7 drivers for this but when I download and try to install what VIA/BIOSTAR say should be good for all OS's it will not load. I get a message saying can't find components for this OS. Anybody have any idea where I might find suitable drivers for the Chipset? BTW I'm not using the integrated graphics on the board but have a radeon 4500 pci-e card.

  Read the article

• external SCSI tape drive DAT 72 problem Solaris 10

  - by Hassan

  Hi all, I have solaris 10 sparc running and working very well but i have problem with external SCSI tape drive DAT 72 problem it seems to me the tape drive is manufactured by SUN microsystems when i ran mt -f /dev/rmt/0 status it reveals the following output bash-3.00# mt -f /dev/rmt/0 status /dev/rmt/0: No such file or directory when i ran ls -l it reveals the following output ls -l /dev/rmt/0 lrwxrwxrwx 1 root root 43 Sep 20 2006 /dev/rmt/0 -> ../../devices/pci@8,600000/scsi@1,1/st@3,0: it seems to me everything is okay SCSI cable is connected properly to Tape device and to server as well the tape has SCSI termination dongle as well and connected properly to Tape device as well any ideas would be a great assist Thanks in advance

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Linux software that

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

• Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

  - by Breadtruck

  So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

  Read the article

• Upgrade the Graphics Card for a Dell Dimension 3100

  - by Pat Foran

  Hi, I have a Dell Dimension 3100 Desktop with a 128MB Graphics Card Integrated into the Mother Board. I need to upgrade this 128MB to at least 256MB or 512MB if the system will support same. I am told by Dell that all I have is a PCIx1 slot and that they do not stock a Graphics Card for this. I was told to shop around at Amazon and ebay etc and I would find one there. I have shopped around for some time now and do not know exactly what I am looking for. There are several PCI Graphics Card out there but which one would be the correct one for a Dell Dimension 3100. Can you help me resolve this problem. If you know of a PCIx1 card that will sort out my problem you might please let me have all the details for to purchase it. Regards, Pat,

  Read the article

• RTL8168B/8111B Lan card is not detected in RHEL5.1..Not finding Lan card driver for this particular

  - by Deepak Narwal

  Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1 Now windows 7 automatically detected this lan card but in redhat lan card is not detected.I have tried to through evrywhere like network or through neat-tui but it is not showing lan card.. I tried google also but all of them providing windows software for this lan card . So please anyone can tell me the link so that i can download drivers for this and can use internet there.. Thanks a lot in advance Deepak Narwal

  Read the article

• USB drivers installed twice

  - by stupid-phil

  Hello, I have a problem with usb drivers on Windows 7 64bit When I start up my laptop, the mouse I have plugged into a usb port does not work. I have to open the device manager, where there are two "Standard Enhanced PCI to USB Host Controller" entries. One is marked as faulty (yellow triangle). I uninstall this. Scan for changes. Then it re-appears, but not marked as faulty. And the mouse works. I have to do this every time I reboot. A colleague has the same problem. Both DELL laptops, but different models. I've tried uninstalling all USB controllers, but after a reboot, they are all reinstalled with the faulty entry. This only started happening in the last few weeks. Any help appreciated. It's driving me nuts. Thanks Phil

  Read the article

• Force an LXC container to use its own IP address

  - by emma sculateur

  Sorry if this question has already been asked. I could not find it, I have this setup : +---------------------------------------------------------------------------------------------+ |HOST | | | | +-------------------------------------------------+ | | | UBUNTU-VM | | | | | | | | +-------------------+ | | | | |UBUNTU-LXC | | +------------------+ | | | | 10.0.0.3/24 | 10.0.0.1/24 | |OTHER VM | | | | | eth0-----lxcbr0----------eth0-----------br0----------eth0 | | | | | | 192.168.100.2/24| 192.168.100.1/24 |192.168.100.3/24 | | | | +-------------------+ | +------------------+ | | +-------------------------------------------------+ | +---------------------------------------------------------------------------------------------+ When I ping 192.168.100.3 from my UBUNTU-LXC, the source IP address is automatically changed to 192.168.100.2 by UBUNTU-VM. It's like having a NAT, whereas I really want my UBUNTU-LXC to talk with it own IP address. Is there any way to do this ? Edit : these info may be relevant : I am using KVM +libvirt to set up my VMs Here is how I create my interface in UBUNTU-VM : <interface type='bridge'> <mac address='52:54:00:cb:aa:74'/> <source bridge='br0'/> <model type='e1000'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </interface>

  Read the article

• Only two monitor ports are detected on nVidia Quadro NVS 450

  - by Erick Robertson

  I have an nVidia Quadro NVS 450 installed in a Dell Optiron 380. Only DisplayPort #1 and DisplayPort #4 are detected by windows. The machine has a BIOS setting to automatically choose the primary video card, or to disable the primary when a PCI-e card is installed (which it is). Windows cannot see DisplayPort #2 and #3 no matter what I do. I have tried the Windows Drivers, latest nVidia Drivers - no dice. I am assured that this video card cannot break in this way. I'm plum out of ideas. I've tried reseating the video card. I've contacted Dell and they've remoted in and looked around - threw their arms up after two hours. Any ideas? I'm running Windows 7 64-bit. All four monitors are 1600x1200 Dell monitors.

  Read the article

• RTL8168B/8111B Lan card is not detected in Redhat..Error is make ***/lib/modules/2.6.18-53.e15/build

  - by Deepak Narwal

  0 Hello friends... In My computer Lan card model is Realtek RTL8168B/8111B PCI-E GIGABIT ETHERNET NIC (NDIS 6.20) My system is dual boot windows 7 and redhat 5.1.Redhat is not picking up this model of Lan card automaticlly. I tried it by downloading from realtak site for this particular model and find some .tar packages for my kernal and when i tried to install them ... check old drivers & unload it build the module and install make */lib/modules/2.6.18-53.e15/build: no such file or directory stop make[1]: *[modules] error 2 make : [modules] error 2 i downloaded tar files from sites and unpack according to their instrution i tried to run autorun.sh script as mentioned in readme file but after doing this it is showing above error... Now what to do i am not getting

  Read the article

• HP Server bios boot delay

  - by jjrab

  I'm just going to throw this out there in case anyone else has run accross this... I have an HP DL320 G5p that had the motherboard replaced due to a faulty NIC port. After several calls to HP, two motherboard replacements, PCI riser card replacements, Processor replacement, and power supply replacement, the server takes approx. 10 minutes before it boots into the BIOS. It then boots up with no issues. We've run the HP smart start cd and performed the system tests and everything passed. All firmware has also been upgraded to the latest as well. Has anyone else seen this and found a fix? I am still working with HP, but there seems to be a struggle on their part to figure this out, so I'm curious to know if anyone else has experienced this and found a fix - thanks...

  Read the article

• Video issues with old server running Boxee

  - by Skaughty

  I have a old Dell Power Edge 1650 1U rackmount server running Windows XP. Dual 1.3 ghz Processors and 1 GB of RAM. I would like to run Boxee on it, but the 8mb integrated video card will not support it. The font within Boxee just comes up as blocks of color. I have a PCI Radion R9000 dual out video card. However when I plug it in I can not get video signal on any of the VGA outs. Is it possible to upgrade the video card on this old of a server, or is it possible to make it work with the older integrated video?

  Read the article

• Wake on Lan/Wan won't work after some time has passsed

  - by Vian Esterhuizen

  I have the following set up: Gigabyte Z77X-UD5H Wake On Lan Enabled Asus N66U Port Forwarding Static IP assigned to my computer Windows 7 Advanced Power Management - PCI Express - Off Intel 82579V - All options under Power Management checked I'm trying to set this up for Wake on Wan capabilities. If I shut down my computer and immediately try to Wake on Wan (and Lan) it works and starts up. While the computer is on, I've used a few WOL specific packet sniffers and the packet comes through on the correct port. After any period of time over a few minutes, waking on Wan or Lan won't work. The back "activity" light is blinking on my ethernet port on my computer, as well as on the router, so I would assume the network card is on and able to receive a signal. Any ideas? Suggestions? What can I do to troubleshoot the problem?

  Read the article

• Input not supported message when monitor is powered off then back on

  - by Jason Down

  I've been getting a message on my monitor where "Input not supported" is floating around. This only happens when I manually turn the monitor off and then later turn it back on. Leaving the monitor on and allowing it to go to the screen saver doesn't seem to cause the issue (but I prefer to turn the monitor off if I'm going to be away from the computer for any length of time). Any ideas what might cause this, only when the monitor is turned off manually? Specs: Acer X203w mointor Radeon 9600 Pro Video card Linux Mint 8 Resolution 1680 x 1050 (16:10 - Preferred native resolution for the monitor) Refresh Rate 60hz Here is what is in my xorg.conf file: Section "Device" Identifier "Radeon 9600" Driver "ati" BusID "PCI:1:0:0" Option "XAANoOffscreenPixmaps" Option "AccelMethod" "XAA" EndSection Section "Screen" Identifier "Default Screen" Device "Radeon 9600" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1680x1050" "1440x900" "1024x768" EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection

  Read the article

• How do I make my Geforce GTS 250's power save mode stop causing audio stuttering?

  - by Matt

  Whenever my GTS 250 enters its power save mode, downscaling its frequencies, my audio stutters. This affects both my onboard audio and my Audigy Soundblaster 2 ZS. Changing Windows power save mode options such as PCI-E link state power management or Power Management Mode in the nVidia control panel have no effect on this issue. Replacing the power supply had no effect on this issue. The BIOS is the latest version, and I have the latest motherboard chipset and graphics drivers installed. I do not overclock. I started to see this issue after I upgraded my rig from its Socket 939 board to a Socket 1156 board with a Core i5-750 while simultaneously upgrading from Vista to 7.

  Read the article

• Change Linux Console's Default Monitor

  - by Tim M

  Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

  Read the article

• Stuttery 1080p playback on decent system

  - by Leo

  We have a media center system that was recently built. It works well for all types of content, however it has issues with 1080p content. 720p plays fine. I have tried VLC, ffdshow and finally, CoreAVC. CoreAVC plays the best however it still eventually loses sync due to stutter - this does not happen on other systems with the same file. Specs: Asrock 4core-2dual sata PCI Express ATI 2400 HD 1.5GB DDR 2100 Intel Pentium E5300 120GB Maxtor Diamondmax PATA Any ideas?

  Read the article

• Hyper-V networking....still not sure which way to go??

  - by CZhale

  We have our Hyper-V server up and running (Windows 2008 ENT SP2) and started to create some of our VMs. The server has 4 total nics. 2 onboard Broadcom 1gb nic cards and a pci dual port Intel Pro cards 1gb. Right now, I have setup 1 broadcom nic to be the hyper-v host nic, and setup the other broadcom nic for the VMs. We are not using the Intel Nics....should we be thinking about teaming?Link Aggregation?? I just want to achieve the best possible setup for the network, but have read many things for and against teaming the nics?? Thoughts?

  Read the article

• SSL issue with emails

  - by JackWillDavis

  OK, so I have somebody hosting a site on my CentOS 5.8 Plesk 11 control panel. He has a EV SSL which is validating the site fine however he has failed the PCI check because it is saying his email servers (SMTP, IPAM, POP) have the wrong name on the servers. This is because his SSL certificate is not a wildcard certificate and the email servers are flagging the default Plesk SSL certificate. Is there a way to stop Plesk automatically connecting emails via the default SSL? I'm fairly new to things like this so I hope I've written everything I need, let me know if any more details are needed. Jack

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >