Search Results

Search found 1394 results on 56 pages for 'pci dss'.

Page 41/56 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Change Linux Console's Default Monitor

  - by Tim M

  Is there any way to specify which monitor the console is displayed on in Linux? Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer. I don't see a way in my BIOS to change the default video card.

  Read the article

• kernel warning disk error for command write - solaris svm

  - by help_me

  Recently this warning came up on my message logs, scsi: [ID 107833 kern.warning] WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd0): Oct 27 00:14:44 Error for Command: write(10) Error Level:Retryable Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Requested Block: 101515828 Error Block: 101515828 Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0441B9B5H Oct 27 00:14:44 scsi: [ID 107833 kern.notice] Sense Key: Hardware Error Oct 27 00:14:44 scsi: [ID 107833 kern.notice] ASC: 0x19 (defect list error), ASCQ: 0x0, FRU: 0x2 This is showing signs of disk failing in my opinion. I have not seen the messages re-occurring. This is on a Solaris 9 Sparc system V240. The disks are managed by SVM and "metadb" is showing the flags as "a" Are there any tests or indications as to check/see if the disk is actually failing or was that error message initiated by something else. Thank you!

  Read the article

• What type of wireless adapter for Verizon Fios?

  - by ShoeLace1291

  I have verizon fios internet service. I believe they use a Wireless G router, but I just have one question. I currently am using a 54mbps wireless pci adapter in my Windows 7 custom build. It drops the internet connection all the time and is starting to get very irritating. I'm thinking about buying a new one, but all the 300mbps cards on newegg are wireless n. So my question is, will a wireless n network adapter make a difference with a wireless g router?

  Read the article

• 2 HDs in RAID 1 with 2 partitions ?

  - by Prix

  Hi, i am not very familiar with raid partitons and am not even sure if this is the right place to ask about it, but i hope that if it is not that some one can point me on the right direction. This is my situation, i have 2 500 GB hds and a 3ware pci-e hardware for raid and i wanted to make a RAID 1 but i dont know if i can make more then one partition for it, for instance: MAIN HD: os partition: 100GB data partition: rest of left size and make the RAID 1 either work on all the HD or just on the data partition of it. that is on windows xp sp3 and the 3ware allows bootable raid.

  Read the article

• Which SATA controller is better to use with Windows Server 2008 R2 64 bit?

  - by at8eqeq3

  We're preforming some hardware upgrade on our server machines. As a part of this process, we have to install some additional disk drives. Unfortunately, total number of drives will become 7 or 8, while all of our motherboards have only 6 SATA ports. Obviously, we need additional disk controllers. For now, we've tested Silicon Image (actually, no-name) and Adaptec controllers, both on SiI3132 chip, and got some problems with drivers for them: Silicon Image drivers are not installing at all, and Adaptec ones are installing, but the system says they're not signed and becomes unbootable. We're tryed both drivers from controllers' CD's and latest versions from manufacturers' websites, and no luck. So, can you recommend some SATA controllers that will really work without tambourine dances on mentioned OS (we need just 2 SATA ports and PCI-E, while RAID and any other features are no-matter)? Thanks for any help.

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• Problem with fitting graphics card

  - by Gary Robinson

  I have recently purchased a new radeon hd5670 graphics card. The problem I have is that it is what I might call a double height card. So the end where you fix the card to the case is twice the size of the card it is replacing. But this means that it is blocked by the rear of the network card. The only way I can see it to cut that part of the fixture part out then I won't have a problem. But has anyone any suggestions what I could use? To be clear it is not the actual card it is the fixture part which is 90 degress to the card that is causing the problem. Unless someone knows of another solution - some kind of pci-e extender that I could use as I could easily

  Read the article

• Is it possible to use two separate USB tuners with Windows Media Center?

  - by Lunatik

  I'm planning to replace my traditional PC-style media center (with twin tuners) with an Asrock Ion 3D (or similar) but this means forgoing my existing PCI-E dual tuner card for a USB solution. Since Freeview HD (using DVB-T2) is now available I'd like to equip my media center to take advantage. The trouble is there are currently no dual DVB-T2 USB tuners on the market (that I can find anyway). Would I be able to plug two separate USB tuners and have them correctly picked up and working within all apps, including Windows Media Center? Are there any caveats I might need to bear in mind when using two tuners in this way?

  Read the article

• Why the different coarse threaded screws?

  - by Luke

  I'm seeing more and more of these screws (pictured below), which are almost triangular. I find I can only put them into Power Supplies and PCI(e) cards in cases, but they will break/strip away if I put them into a hard drive or a standoff for a motherboard Notice the triangular shape on it? On the Root Access chat, I started asking, but no concrete answer yet. I don't assume it's a production flaw, as I've seen hundreds and replaced them with the "proper" round screws. It is coarse-threaded, not fine-threaded (i.e. for a DVD drive or floppy drive). What are they for, and why do we need them instead of the regular round ones?

  Read the article

• Are there HP Infinihost III ex drivers for windows available?

  - by Matt

  I picked up some infiniband cards off ebay for development/testing purposes. I was hoping that there would be some drivers available under windows 7, but it doesn't seem to be recognised by the OFED software which would seem to contain windows drivers. They are however immediately picked up by Ubuntu and drivers are loaded. Are these cards supported under windows 7 at all? mstflint under linux reports: Image type: Failsafe FW Version: 4.8.930 I.S. Version: 1 Device ID: 25208 Chip Revision: A0 Description: Node Port1 Port2 Sys image GUIDs: 001a4bffff0c9374 001a4bffff0c9375 001a4bffff0c9376 001a4bffff0c9377 Board ID: (HP_0060000001) VSD: PSID: HP_0060000001 From what I can tell they are the following: HP IB 4X DDR PCI-e DUAL PORT HCA (HP part number 409376-B21)

  Read the article

• IIS 6.0 mitigating BEAST

  - by D3l_Gato

  Recently, my PCI assessor informed me that my servers are vulnerable to BEAST and failed me. I did my homework and I want to change our webservers to prefer RC4 ciphers over CBC. I followed every guide I could find... I changed my reg keys for my weaker than 128bit encryption to Enabled = 0. completely removed the reg keys for the weaker encryptions. I downloaded IISCrypto and unchecked everything but RC4 128 ciphers and triple DES 168. My webserver still prefers AES-256SHA. Is there a trick in IIS 6.0 to get your webservers to prefer RC4 ciphers that I am not figuring out? It seems like in IIS 7 they made this very easy to fix but that doesn't help me now!

  Read the article

• Windows 7 boot order and locations

  - by Russ C

  Hi, Long story short, a program that shouldn't have been run on this machine has been, and it's created a naughty .sys file that is being loaded right after pci.sys (as determined by NBTLog.txt) I've had a look a BCDEdit, EasyBCD and a number of Registry keys but I can't seem to determine where about winstart.exe actually gets the list of sys files to load from! The sys file itself is running in high elevation and appears to be defeating all attempts to remove it; I could (probably should) make a Linux USB boot disc and use it to delete the sys file, but I'd really appreciate understanding the mechanics here. ((FWIW: the problem stemmed from a sibling running a Trainer for some game; he has been suitable chastised))

  Read the article

• How to update OpenSSL using Putty and yum command

  - by JM4

  I am so new to updating server technologies it is unbelievable but we are trying to become PCI Compliant and have to update some of our server technologies. One in particular is OpenSSL. We are currently running arch i686 0.9.8e but we have to upgrade to ATLEAST 0.9.8g. When I run a yum update command, there are no updates available. If I run "yum info openssl" it says available packages are: arch i386 0.9.8e but the only difference is smaller file size. I am running the following repositories: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirrors.netdna.com * atomic: www6.atomicorp.com * base: mirrors.igsobe.com * extras: mirror.vcu.edu * updates: mirror.vcu.edu any help out there?

  Read the article

• ISA bus on newer computers

  - by Kevin Ivarsen

  Are there companies that sell new computers that support old ISA bus expansion cards? We have an aging computer running DOS that operates some machinery via an ISA interface board. Updated versions of this board (e.g. PCI, USB) are not available, and I am concerned about the long-term reliability of the 8+ year old computers we currently keep around as backups. If these newer ISA-capable machines exist, are there any general gotchas to be aware of in terms of compatibility with older expansion boards, ability to run DOS, etc.?

  Read the article

• Intermittent graphics issue

  - by Rob

  An older (~3 year old) PC I have passed on to my younger brother has a Sony 17" LCD monitor and uses on-board Intel GMA 3100 graphics (supports Aero under Windows 7 and no more is required). Recently he has complained to me twice that after booting up the screen looks all 'fuzzy'. Initially I thought maybe he messed up the ClearType settings by mistake, but resetting that did nothing. The only thing that finally worked was changing the resolution to something else temporarily, then setting it back to the original native (highest supported) resolution. The second time this happened the same 'fix' worked. This is happening only intermittently as of now and is not predictable/reproducible. I suspect either the monitor or on-board graphics is dying. How can I check and confirm which of the two it is (or maybe something else you guys can think of)? If it's the on-board graphics, would I be able to keep using the same motherboard with the addition of a cheap PCI-E graphics card?

  Read the article

• When XP is asleep for a long time LAN reports code 43, gives up the ghost.

  - by seeanimal

  This one's got me stumped. Whenever the system is asleep for a long time, e.g overnight, the LAN driver reports error code 43 ("a problem") and turns itself off. This has being going on for months, but I never caught the problem until now. The owner merely shuttles back to a restore point I set her when the machine worked. Previously (without knowing exactly what was happening) I have tried everything to resolve this. Manually resetting the TCP/IP, fiddling with the driver Wake From LAN settings, DIFFERENT drivers, etc. etc. The solution is easy, uninstalling and reinstalling the driver. Understandably, though, the user is uncomfortable with this operation and the problem persists. What's causing it and how to stop it recurring? Any ideas? Thanks in advance to this great community. XP home SP3, Marvell Yukon 88E8056 PCI-E Gigabit Ethrnet Controller, version 10.22.7.3 (yk51x86.sys)

  Read the article

• How does a winkydink Teradici offer high res, full FPS, 3D rendering on ESXi 5 VDIs for AutoCAD/SolidWorks/1080p YouTube applications?

  - by BlueToast

  How does such a small Teradici card ![enter image description here][1] offer high resolution, full FPS 3D graphics (1:38) http://www.youtube.com/watch?v=eXA4QMmfY5Y&feature=player_detailpage#t=97s for ESXi 5.0/5.1 VDI environments? We're shooting for an AutoCAD/SolidWorks/YouTube 1080p capable environment. I can't see how such a small and low profile card could possibly have the horsepower to handle such GPU computations for a big environment like that. We're going to have up to 64 VDIs per server, and are a 500-1000 employee count sized company. Someone enlighten me please! Determining which route to go (between RemoteFX and VMware View/PCoIP) and the hardware (NVIDIA 4GB non-Quadro/Tesla GPUs vs Teradici card). Servers have three 4x, three 8x, and one 16x PCI-E lane. Two of the 8x lanes will be occupied by SAS RAID cards.

  Read the article

• Is a "Soft Modem" (i.e. internal) really going to cause incompatibilities?

  - by Farseeker

  Thanks to the fact that our banking industry in Australia... outdated (which is the politest word I could think of when describing the banking industry)... to do a certain kind of transaction our bank requires us to use a dialup modem and send serial data to them. When reading through their documentation (last update: 1995), they state that any "Soft Modems" (by which I assume they mean internal modems, as they refer to a AMR socket on a motherboard, which I haven't seen in donkeys years) should not be used because of "possible incompatibilities" Seeing as buying an external, serial-port modem is actually quite expensive these days and I have a whole box of PCI modems taken out of a bunch of Dells I really don't want to have to buy an external modem. Additionally I think their documentation is simply outdated. Has anyone had experience with internal modems causing issues, where an external modem didn't?

  Read the article

• aireplay - reading but not sending

  - by oneat

  I'm trying aircrack injection, everything is working I authenticated, but aireplay is not working aireplay-ng -3 -b 00:12:2A:01:74:05 -h 78:e4:00:87:71:8b mon0 18:53:03 Waiting for beacon frame (BSSID: 00:12:2A:01:74:05) on channel 7 Saving ARP requests in replay_arp-0817-185303.cap You should also start airodump-ng to capture replies. Read 4988 packets (0 ARPs, 4 ACKs), sent 0 packets...(0 pps) Why isn't it working? Why isn't it sending packets? 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) I tested injection on injection test in aircrack tutorial, despite driver wasn't patched.

  Read the article

• connecting 2 ubuntu computers as a lan

  - by Brendan Cutjar

  Hi i am trying to connect 2 ubuntu computers as a LAN. In my current setup I have: One machine running ubuntu 11.10 with Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller While the other machine is running Ubuntu 12.04 with an Atheros Communications Inc AR8152 v1.1 Fast Ethernet The two machines are connected via a switch (Edimax ES-3205P). Unfortunately I still cannot connect the two machines together. Can somebody please show me what to do and how to go about solving this issue?

  Read the article

• VM: Windows 7 host, Linux guest, VT-d?

  - by chx

  I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

  Read the article

• Recovering data from a Silicon Image SiI3114 RAID

  - by Isaac Truett

  I have a set of 3 disks in RAID 5 originally created with a Silicon Image SiI3114 on-board RAID controller. The old motherboard is dead. The new motherboard (which has a different raid controller) won't boot from the array. I have no reason to believe that the drives are damaged or corrupted. I'm 99% sure that the problem is that the new controller isn't compatible or I'm not setting it up properly. Is it possible to recover data from the drives using a different controller? Would a PCI card like this one allow me to read from the array again?

  Read the article

• Apache update to 2.2.23 on ubuntu 12.04 LTS

  - by user1802200

  We had done a PCI scan on one of our servers running Ubuntu 12.04 LTS with apache 2.2.22.The scan reported a vulnerability in apache 2.2.22 (Apache HTTP Server Zero-Length Directory Name in LD_LIBRARY_PATH Vulnerability).The report states to updgrade the version to the latest stable release of either 2.2.23 or 2.4.2.How do I upgrade to the 2.2.23 to fix the vulnerability or is there a patch available that can fix this and if yes can you let me know how that can be patched. Also is the latest version of apache2.2.22 available for ubuntu 12.04 LTS patched with the fix for **Apache HTTP Server Zero-Length Directory Name in LD_LIBRARY_PATH Vulnerability** Regards, Salil Phatak India

  Read the article

• Is a memory upgrade a viable option to fix performance issues? [closed]

  - by ratchet freak

  I'm currently seeing my PC getting bogged down by Firefox 11.0 alone with only one hundred tabs open. Resulting in a memory use of over 530M , VM size of over 800M and an insane amount of page faults (easily reaching 100 million over the course of the day). The PF delta during normal operation easily reaches 7k with peaks to 15k sometimes reaching over 20k. This leads to a (real) deterioration to response time when switching, opening and closing tabs, opening menus, typing, ... My question is: Am I right in assuming that plugging in more RAM (either adding 2x1GB or replacing the existing RAM with 2x2GB or 4x1GB) will solve this problem? My specs: Windows XP Home Edition SP3 (32 bit) Intel Core Duo 2,4 GHz 2x512MB RAM 800MHz DDR2 (dual channel) 4MB unified cache 320GB HDD Intel G33 (X3100) onboard graphics (no graphics card but PCI express x16 slot is available)

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >