Search Results

Search found 1394 results on 56 pages for 'pci dss'.

Page 42/56 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Which LAN driver should I use for Asus F5Z ?

  - by Radek

  A friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed successfully all drivers from Asus driver download site. Everything is working fine but the Ethernet driver. The installation of Lan Driver for Windows XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

  Read the article

• Most efficient hard drive configuration for multitasking system

  - by user99391

  I hope I didn’t screw up the tile. Currently I’m using for my system 2x500g Raid0 system. I’m thinking about an upgrade but I got hold up by few questions. I need at least 100-120 gb for my system and apps and looking for a technological upgrade also. I've end up with 3 choices. Single 120 ssd (sata 6 drive) 2x60 ssd drives, but I've heard it's not possible. PCI ssd drive (~120gb). They all have very similar read/write values and prices but I was wondering if anyone could give some tips on which way to go. I run win7x64 and do a lot of multitasking(especially adobe stuff).

  Read the article

• Intel Network Connection: This device cannot start. (Code 10)

  - by harryuser

  I have a Intel® Desktop Board DP55KG (see http://www.intel.com/products/desktop/motherboards/DP55KG/DP55KG-overview.htm), which has a Intel 82578DC Gigabit Network Connection on board. Additionally, I have a Intel PRO/1000 PT Dual Port Server Adapter in a PCI express slot and I am running Windows 7 Professional 32-bit. Also I am running with Intels latest network driver, in the 82578DC questions this means 11.6.92.0 with driver date 2010.04.12. The problem I am having is that the Intel 82578DC Gigabit Network Connection will not start on boot with the following message: "This device cannot start. (Code 10)". Disabling and then enabling the device after boot makes the network connection work again without any problems, but as soon as I reboot the problem occurs again. Any suggestion how to fix this? I have seen this problem on another Intel S3420GP board as well in Windows 7 that is.

  Read the article

• Motherboard dual gfx power question

  - by user33931

  1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

  Read the article

• Missing Driver - Video Controller (VGA Compatible)

  - by arahant

  I have a HP 2000-2106TU Notebook PC running Windows XP. I want to get the brightness keys to work. They are placed over the F2 and F3 buttons and are meant to be used in conjunction with the Fn key. But these combinations do not work, though other Fn keys such as the volume control keys do. I see a missing driver for a device called Video Controller (VGA Compatible) in the Windows Device Manager. The hardware id is PCI VEN 8086 DEV 0106 SUBSYS_1858103C which a Google search suggests is in an Intel HD Graphics family, but I don't know where to locate the driver. HP's driver scan does not help, as it does not show any missing driver related to video/graphics. What can I do next?

  Read the article

• USB 3.0 Device not detected in Windows 8

  - by Tek

  About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

  Read the article

• Is it worth having SATA 6GB/s cables? [duplicate]

  - by zyboxenterprises

  This question already has an answer here: Are all SATA cables compatible with SATA 3? 2 answers I've just received some SATA 3 6GB/s cables that I ordered last week, and it struck me how ordinary they look when compared to normal standard SATA cables. My PCI-E SATA3 card is yet to arrive. My question is, would a standard SATA cable have the same transfer speeds as my SATA 3 6GB/s cables? Question is similar to this one, but however it doesn't have an answer. This question isn't asking 'are all SATA cables compatible with SATA 3', it's asking whether SATA 2 and SATA 3 transfer speeds are the same.

  Read the article

• Will a `wireless n` network adapter work `wireless g` router?

  - by ShoeLace1291

  I have verizon fios internet service. I believe they use a Wireless G router, but I just have one question. I currently am using a 54mbps wireless pci adapter in my Windows 7 custom build. It drops the internet connection all the time and is starting to get very irritating. I'm thinking about buying a new one, but all the 300mbps cards on newegg are wireless n. So my question is, will a wireless n network adapter make a difference with a wireless g router?

  Read the article

• Intel Corporation Ethernet Connection does not start properly

  - by Oscar Alejos

  I'm experiencing some problems when trying to connect my PC to the router through a switch. When the PC is directly connected to the router, everything works fine, Ubuntu (14.04) starts normally, and the Internet connection runs inmediately. The Ethernet controller is the Intel Corporation Ethernet Connection, as lspci returns: $ lspci | grep Eth 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) However, when I try to connect through the switch what I get is the following. dmesg returns: $ dmesg | grep eth [ 1.035585] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.035587] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a7:be:5d [ 1.035589] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.035625] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.357838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.641287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.715086] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.715090] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.715117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready It looks like eth0 is properly working. Actually, nm-tool returns: $ nm-tool - Device: eth0 [Conexión cableada] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: 00:22:4D:A7:BE:5D Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.30 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 80.58.61.250 DNS: 80.58.61.254 DNS: 192.168.1.1 However, ping returns: $ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. From 192.168.1.30 icmp_seq=1 Destination Host Unreachable From 192.168.1.30 icmp_seq=2 Destination Host Unreachable From 192.168.1.30 icmp_seq=3 Destination Host Unreachable The connection is restored by restarting it: # ifconfig eth0 down # ifconfig eth0 up From this point on, everything runs smoothly, as if the PC were directly connected to the router. It seems to be an issue related to the integrated LAN adaptor and the Ethernet controller, since my laptop connects without any problem. My desktop board is an Intel DB85FL. I'd be grateful if anyone could give some ideas on how to solve this issue. Thank you in advance.

  Read the article

• Bastion - Indie Humble Bundle

  - by user68008

  I have downloaded Bastion for Ubuntu and installed in the home folder normally. When executing "Games Bastion" nothing happens. Running Bastion directly from the installation folder results in the error below Unhandled Exception: System.EntryPointNotFoundException: glProgramParameteri at (wrapper managed-to-native) OpenTK.Graphics.OpenGL.GL/Core:ProgramParameteri (uint,OpenTK.Graphics.OpenGL.AssemblyProgramParameterArb,int) at OpenTK.Graphics.OpenGL.GL.ProgramParameter (Int32 program, AssemblyProgramParameterArb pname, Int32 value) [0x00000] in <filename unknown>:0 at Microsoft.Xna.Framework.Graphics.EffectPass.ApplyPass () [0x00000] in <filename unknown>:0 at Microsoft.Xna.Framework.Graphics.Effect.DefineTechnique (System.String techniqueName, System.String passName, Int32 vertexIndex, Int32 fragmentIndex) [0x00000] in <filename unknown>:0 at Microsoft.Xna.Framework.Graphics.SpriteEffect..ctor (Microsoft.Xna.Framework.Graphics.GraphicsDevice graphicsDevice) [0x00000] in <filename unknown>:0 at Microsoft.Xna.Framework.Graphics.SpriteBatch..ctor (Microsoft.Xna.Framework.Graphics.GraphicsDevice graphicsDevice) [0x00000] in <filename unknown>:0 at GSGE.ExceptionGame.LoadContent () [0x00000] in <filename unknown>:0 <snip> I have tried some solutions on the internet, like adding OpenTK.dll.config the line below: <dllmap os="linux" dll="libXi" target="libXi.so.6"/> This didn't help. Also tried running as sudo and that didn't help. Some posts said that this might be a problem with Ubuntu noveau drivers. But I'm using the NVIDIA proprietary drivers. DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04.4 LTS" OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce 9400 GT/PCI/SSE2 OpenGL version string: 3.2.0 NVIDIA 195.36.24 direct rendering: Yes

  Read the article

• TDE Tablespace Encryption 11.2.0.1 Certified with EBS 12

  - by Steven Chan

  Oracle Advanced Security is an optional licenced Oracle 11g Database add-on.  Oracle Advanced Security Transparent Data Encryption (TDE) offers two different features:  column encryption and tablespace encryption.  11.2.0.1 TDE Column encryption was certified with E-Business Suite 12 as part of our overall 11.2.0.1 database certification.  As of today, 11.2.0.1 TDE Tablespace encryption is now certified with Oracle E-Business Suite Release 12. What is Transparent Data Encryption (TDE) ? Oracle Advanced Security Transparent Data Encryption (TDE) allows you to protect data at rest. TDE helps address privacy and PCI requirements by encrypting personally identifiable information (PII) such as Social Security numbers and credit card numbers. TDE is completely transparent to existing applications with no triggers, views or other application changes required. Data is transparently encrypted when written to disk and transparently decrypted after an application user has successfully authenticated and passed all authorization checks. Authorization checks include verifying the user has the necessary select and update privileges on the application table and checking Database Vault, Label Security and Virtual Private Database enforcement policies.

  Read the article

• Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E

  - by Sebastian Bugiu

  I had Ubuntu 11.10 and in the last few weeks I experienced an obscure problem: after I had the computer running for a few days I could no longer connect to google.com or anything related to google. All sites worked with all browsers (Firefox, chrome, opera) except google. It remained in the connecting phase for a few minutes and either timed out or finally connected with this huge delay. Even if I entered other sites such as this one, if it had anything to do with google such adsense or gstatic or whatever with g in it, that site took a long time to load waiting in connecting to gstatic.com . Anything google related took minutes to work, but everything else worked instantly! I tried rebooting or using other machine(with windows on it) and this worked, so it's not network related. But after a few days it started not working again... So I upgraded to the Precise Pangolin hoping this behavior would go away. It didn't! After a few days I get the same behavior as in 11.10. What am I supposed to do? Reboot every other day? I didn't have this problem with neither 10.10 or 11.04. I found the Realtek RTL8168/8111E issue with the r8169 driver but this is not exactly the same card so probably trying r8168 won't help. Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Subsystem: Toshiba America Info Systems Device ff1c Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at 4000 [size=256] Memory at d0010000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=64K] Capabilities: [40] Power Management version 7 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [ac] MSI-X: Enable- Count=2 Masked- Capabilities: [cc] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 09-00-00-00-ff-ff-00-00 Kernel driver in use: r8169 Kernel modules: r8169

  Read the article

• mediatek 7630e 802.11 wifi bgn adapter failed in hp probook G1

  - by user257026

  id: network description: Network controller product: MT7630e 802.11bgn Wireless Network Adapter vendor: MEDIATEK Corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency = 0 resources: memory : b0600000-b06fffff THIS IS MY WIFI driver details of my notebook pc.... BY the way.. recently I have installed ubuntu 14.04 LTS .....my every hardware is working properly except wifi adapter.... in windows it(wifi) was also working properly.. from hp driver center I have download linux kernel driver package ..Actually those driver package was rpm package ...then i have convert it to .dev file using alien...but the true fact is no result though..... again,previously released ubuntu version(such as 12.04LTS) causes the same issue ...those versions have same bugs there.. after googling web i have few results but no reliable outcomes to solve my problem(wifi issue) ..... As I am new user in ubuntu I cannot able to solve the problem drastically like pro(superuser).. https://answers.launchpad.net/ubuntu/+question/243203 How do I get a Mediatek MT7630E 802.11bgn Wi-Fi Adapter working? here two links about my issuses but I am confused what can i do (feeling meh)??? is there anyone who can help me in this issues...?? my notebook model is HP probook 450G1 Question #243203 : Questions : Ubuntu My HP laptop uses MediaTek's (MEDIATEK Corp.) MT7630e 802.11bgn Wireless Network Adapter. I cannot access wifi after installing Ubuntu myself and there are no drivers available - or so it seems. Apparantly some laptops which use this card came with Ubuntu pre-installed, with working drivers. These d… answers.launchpad.net Question #243203 : Questions : Ubuntu My HP laptop uses MediaTek's (MEDIATEK Corp.) MT7630e 802.11bgn Wireless Network Adapter. I cannot access wifi after installing Ubuntu myself and there are no drivers available - or so it... ANSWERS.LAUNCHPAD.NET

  Read the article

• GLSL compile error when accessing an array with compile-time constant index

  - by Benlitz

  I have this shader that works well on my computer (using an ATI HD 5700). I have a loop iterating between two constant values, which is, afaik, acceptable in a glsl shader. I write stuff in two arrays in this loop. #define NB_POINT_LIGHT 2 ... varying vec3 vVertToLight[NB_POINT_LIGHT]; varying vec3 vVertToLightWS[NB_POINT_LIGHT]; ... void main() { ... for (int i = 0; i < NB_POINT_LIGHT; ++i) { if (bPointLightUse[i]) { vVertToLight[i] = ConvertToTangentSpace(ShPointLightData[i].Position - WorldPos.xyz); vVertToLightWS[i] = ShPointLightData[i].Position - WorldPos.xyz; } } ... } I tried my program on another computer equipped with an nVidia GTX 560 Ti, and it fails to compile my shader. I get the following errors (94 and 95 are the lines of the two affectations) when calling glLinkProgram: Vertex info ----------- 0(94) : error C5025: lvalue in assignment too complex 0(95) : error C5025: lvalue in assignment too complex I think my code is valid, I don't know if this comes from a compiler bug, a conversion of my shader to another format from the compiler (nvidia looks to convert it to CG), or if I just missed something. I already tried to remove the if (bPointLightUse[i]) statement and I still have the same error. However, if I just write this: vVertToLight[0] = ConvertToTangentSpace(ShPointLightData[0].Position - WorldPos.xyz); vVertToLightWS[0] = ShPointLightData[0].Position - WorldPos.xyz; vVertToLight[1] = ConvertToTangentSpace(ShPointLightData[1].Position - WorldPos.xyz); vVertToLightWS[1] = ShPointLightData[1].Position - WorldPos.xyz; Then I don't have the error anymore, but it's really unconvenient so I would prefer to keep something loop-based. Here is the more detailled config that works: Vendor: ATI Technologies Inc. Renderer: ATI Radeon HD 5700 Series Version: 4.1.10750 Compatibility Profile Context Shading Language version: 4.10 And here is the more detailed config that doesn't work (should also be compatibility profile, although not indicated): Vendor: NVIDIA Corporation Renderer: GeForce GTX 560 Ti/PCI/SSE2 Version: 4.1.0 Shading Language version: 4.10 NVIDIA via Cg compiler

  Read the article

• Unity stuck in 2D mode, Nvidia Quadro graphics "unknown", Nvidia-Current active but not in use

  - by Jordan Lund

  I've seen this problem reported under several questions, but I haven't been able to resolve any of it so I thought I'd bring it all in under one umbrella. I started a new job and was given a Dell Precision M6400 laptop with Nvidia Quadro FX 2700M graphics card. It had a previous version of Ubuntu on it, but nobody had any passwords for it so I wiped the drive and did a fresh install of 11.10 from scratch. I didn't do any updates during installation, preferring to do them after boot. Updates ran fine and the system works... except Unity is in 2D mode. System Settings - Additional Drivers shows that Nvidia-Current is active but not in use. System Settings - System Info shows Graphics Driver Unknown, Experience Standard Nvidia X Server Settings is installed and working, re-writing the xorg.conf did nothing. /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 2700M/PCI/SSE2 OpenGL version string: 3.3.0 NVIDIA 285.05.09 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes One suggestion was to do a sudo apt-get --purge remove nvidia* and that resulted in a scrambled screen on boot and a non-bootable installation. Pressing the Delete key on boot allowed me to access the recovery console and do a sudo apt-get install nvidia-current, which brought me back to a working, bootable system. Another suggestion was to edit /etc/default/grub and change the line reading "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to read "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vmalloc=192MB" thus allocating more video RAM. I did that, followed by a sudo update-grub and a re-boot. No change. Created a brand new standard user and logged on with that account, no change.

  Read the article

• Disable Ethernet permanently to speed up boot time

  - by Anwar Shah

  I do not use the wired Ethernet Card. It seems to me that, Ubuntu is always trying in boot time to check the network via eth0, Which consumes some times and I guess this may slow down the boot process a bit. My dmesg output is below (partial) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985592] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985651] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985693] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 2.056261] firewire_core: created device fw0: GUID 00023f87af41fd7d, S400 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 3.710435] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) A big time here..... 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 13.466642] ADDRCONF(NETDEV_UP): eth0: link is not ready 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.125296] Adding 1050620k swap on /dev/sda6. Priority:-1 extents:1 across:1050620k 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.226952] EXT4-fs (sda9): re-mounted. Opts: (null) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335012] snd_hda_intel 0000:00:1b.0: PCI INT A - GSI 22 (level, low) - IRQ 22 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335091] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335128] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.346410] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.428551] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.436958] cfg80211: Calling CRDA to update world regulatory domain 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.476550] Linux video capture interface: v2.00 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.486385] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008) So, My question is How can I disable the Ethernet card completely, so that kernel will not try to use that?

  Read the article

• Machine Check Exception

  - by Karl Entwistle

  When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

  Read the article

• hp pavilion g6 1250 with a BCM 4313 doesn't see any wireless networks

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation, ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) There are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• VLC 2.0.3 on Lubuntu 12.04: No audio?

  - by drezabek

  I am on Lubuntu 12.04, and I have installed VLC media player version 2.0.3. When I try and play an audio file, it appears to load fine, and the media position bar displays the progress, and it says it is playing, but I can't here any thing through my speakers. I can hear game audio, web audio, and audio from SMPlayer just fine, but with VLC, I can't here anything. Below is the "Messages" output with the verbosity option set to "2 (debug)" main debug: processing request item: The Bottom, node: Playlist, skip: 0 main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: starting playback of the new playlist item main debug: resyncing on The Bottom main debug: The Bottom is at 0 main debug: creating new input thread main debug: Creating an input for 'The Bottom' main debug: TIMER input launching for 'Floex - Machinarium Soundtrack - 01 The Bottom.flac' : 23.706 ms - Total 23.706 ms / 1 intvls (Avg 23.706 ms) main debug: using timeshift granularity of 50 MiB, in path '/tmp' main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' gives access `file' demux `' path `/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access_demux module: 3 candidates main debug: no access_demux module matching "file" could be loaded main debug: TIMER module_need() : 2.332 ms - Total 2.332 ms / 1 intvls (Avg 2.332 ms) main debug: creating access 'file' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac', path='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for access module: 2 candidates filesystem debug: opening file `/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: using access module "filesystem" main debug: TIMER module_need() : 0.762 ms - Total 0.762 ms / 1 intvls (Avg 0.762 ms) main debug: Using stream method for AStream* main debug: starting pre-buffering main debug: received first data after 0 ms main debug: pre-buffering done 1024 bytes in 0s - 43478 KiB/s main debug: looking for stream_filter module: 7 candidates main debug: no stream_filter module matching "any" could be loaded main debug: TIMER module_need() : 0.236 ms - Total 0.236 ms / 1 intvls (Avg 0.236 ms) main debug: looking for stream_filter module: 1 candidate main debug: using stream_filter module "stream_filter_record" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: creating demux: access='file' demux='' location='/home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' file='/home/doug/Music/unsorted/Floex - Machinarium Soundtrack/Floex - Machinarium Soundtrack - 01 The Bottom.flac' main debug: looking for demux module: 54 candidates flacsys debug: Picture type=3 mime=image/png description='' file length=679371 qt4 debug: IM: Setting an input main debug: looking for packetizer module: 21 candidates main debug: using packetizer module "packetizer_flac" main debug: TIMER module_need() : 0.211 ms - Total 0.211 ms / 1 intvls (Avg 0.211 ms) main debug: using demux module "flacsys" main debug: TIMER module_need() : 4.023 ms - Total 4.023 ms / 1 intvls (Avg 4.023 ms) main debug: looking for a subtitle file in /home/doug/Music/unsorted/Floex - Machinarium Soundtrack/ main debug: looking for meta reader module: 2 candidates main debug: using meta reader module "taglib" main debug: TIMER module_need() : 5.245 ms - Total 5.245 ms / 1 intvls (Avg 5.245 ms) main debug: removing module "taglib" main debug: `file:///home/doug/Music/unsorted/Floex%20-%20Machinarium%20Soundtrack/Floex%20-%20Machinarium%20Soundtrack%20-%2001%20The%20Bottom.flac' successfully opened main debug: selecting program id=0 main debug: looking for decoder module: 30 candidates main debug: using decoder module "flac" main debug: TIMER module_need() : 0.442 ms - Total 0.442 ms / 1 intvls (Avg 0.442 ms) main debug: Buffering 0% flac debug: decode STREAMINFO flac debug: channels:2 samplerate:44100 bitspersamples:16 flac debug: STREAMINFO decoded main debug: Buffering 30% main debug: recycling audio output main debug: looking for audio output module: 3 candidates main debug: Buffering 61% pulse debug: using stereo channel map pulse debug: using library version 1.1.0 pulse debug: (compiled with version 1.1.0, protocol 26) main debug: Buffering 92% main debug: Stream buffering done (371 ms in 2 ms) pulse debug: connected locally to unix:/home/doug/.pulse/dce22254e867f905188a2ce200000003-runtime/native as client #14 pulse debug: using protocol 26, server protocol 26 pulse debug: using buffer metrics: maxlength=4194304, tlength=9880, prebuf=0, minreq=3528 pulse debug: connected to sink 0: alsa_output.pci-0000_00_14.2.analog-stereo main debug: using audio output module "pulse" main debug: TIMER module_need() : 4.571 ms - Total 4.571 ms / 1 intvls (Avg 4.571 ms) main debug: output 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: mixer 'f32l' 44100 Hz Stereo frame=1 samples/8 bytes main debug: filter(s) 'f32l'->'s16l' 44100 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: f32l->s16l, bits per sample: 32->16 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.187 ms - Total 0.187 ms / 1 intvls (Avg 0.187 ms) main debug: conversion pipeline completed main debug: looking for audio mixer module: 2 candidates main debug: using audio mixer module "float32_mixer" main debug: TIMER module_need() : 0.125 ms - Total 0.125 ms / 1 intvls (Avg 0.125 ms) main debug: input 's16l' 44100 Hz Stereo frame=1 samples/4 bytes main debug: looking for audio filter module: 1 candidate scaletempo debug: format: 44100 rate, 2 nch, 4 bps, fl32 scaletempo debug: params: 30 stride, 0.200 overlap, 14 search scaletempo debug: 1.000 scale, 1323.000 stride_in, 1323 stride_out, 1059 standing, 264 overlap, 617 search, 2204 queue, fl32 mode main debug: using audio filter module "scaletempo" main debug: TIMER module_need() : 0.233 ms - Total 0.233 ms / 1 intvls (Avg 0.233 ms) main debug: filter(s) 's16l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo pulse debug: listing sink alsa_output.pci-0000_00_14.2.analog-stereo (0): Built-in Audio Analog Stereo main debug: looking for audio filter module: 14 candidates audio_format debug: s16l->f32l, bits per sample: 16->32 main debug: using audio filter module "audio_format" main debug: TIMER module_need() : 0.147 ms - Total 0.147 ms / 1 intvls (Avg 0.147 ms) main debug: conversion pipeline completed pulse debug: base volume: 65536 main debug: looking for audio filter module: 1 candidate equalizer debug: equalizer loaded for 44100 Hz with 10 bands 2 pass equalizer debug: 60 Hz -> factor:0.000000 alpha:0.003013 beta:0.993973 gamma:1.993901 equalizer debug: 170 Hz -> factor:0.000000 alpha:0.008490 beta:0.983019 gamma:1.982437 equalizer debug: 310 Hz -> factor:0.000000 alpha:0.015374 beta:0.969252 gamma:1.967331 equalizer debug: 600 Hz -> factor:0.000000 alpha:0.029328 beta:0.941343 gamma:1.934254 equalizer debug: 1000 Hz -> factor:0.000000 alpha:0.047918 beta:0.904163 gamma:1.884869 equalizer debug: 3000 Hz -> factor:0.000000 alpha:0.130408 beta:0.739184 gamma:1.582718 equalizer debug: 6000 Hz -> factor:0.000000 alpha:0.226555 beta:0.546889 gamma:1.015267 equalizer debug: 12000 Hz -> factor:0.000000 alpha:0.344937 beta:0.310127 gamma:-0.181410 equalizer debug: 14000 Hz -> factor:0.000000 alpha:0.366438 beta:0.267123 gamma:-0.521151 equalizer debug: 16000 Hz -> factor:0.000000 alpha:0.379009 beta:0.241981 gamma:-0.808451 main debug: using audio filter module "equalizer" main debug: TIMER module_need() : 0.353 ms - Total 0.353 ms / 1 intvls (Avg 0.353 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: looking for visualization2 module: 1 candidate main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 3.278 ms - Total 3.278 ms / 1 intvls (Avg 3.278 ms) main debug: looking for video filter2 module: 18 candidates swscale debug: 32x32 chroma: YUVA -> 16x16 chroma: RGBA with scaling using Bicubic (good quality) main debug: using video filter2 module "swscale" main debug: TIMER module_need() : 1.037 ms - Total 1.037 ms / 1 intvls (Avg 1.037 ms) main debug: looking for video filter2 module: 18 candidates yuvp debug: YUVP to YUVA converter main debug: using video filter2 module "yuvp" main debug: TIMER module_need() : 0.156 ms - Total 0.156 ms / 1 intvls (Avg 0.156 ms) main debug: Deinterlacing available main debug: deinterlace 0, mode blend, is_needed 0 main debug: Opening vout display wrapper main debug: looking for vout display module: 6 candidates main debug: looking for vout window xid module: 4 candidates qt4 debug: requesting video... qt4 debug: Video was requested 0, 0 main debug: using vout window xid module "qt4" main debug: TIMER module_need() : 61.671 ms - Total 61.671 ms / 1 intvls (Avg 61.671 ms) main debug: looking for inhibit module: 2 candidates main debug: using inhibit module "xdg_screensaver" main debug: TIMER module_need() : 0.336 ms - Total 0.336 ms / 1 intvls (Avg 0.336 ms) xdg_screensaver debug: started xdg-screensaver (PID = 6682) xcb_xv debug: connected to X11.0 server xcb_xv debug: vendor : The X.Org Foundation xcb_xv debug: version: 11103000 xcb_xv debug: using screen 0x15a xcb_xv debug: using XVideo extension v2.2 xcb_xv debug: using adaptor NV17 Video Texture xcb_xv debug: using port 310 xcb_xv debug: using image format 0x30323449 xcb_xv debug: using X11 visual ID 0x21 (depth: 24) xcb_xv debug: using X11 window 0x03400000 xcb_xv debug: using X11 graphic context 0x03400002 main debug: VoutDisplayEvent 'fullscreen' 0 main debug: VoutDisplayEvent 'resize' 800x500 window main debug: using vout display module "xcb_xv" main debug: TIMER module_need() : 69.890 ms - Total 69.890 ms / 1 intvls (Avg 69.890 ms) main debug: original format sz 800x500, of (0,0), vsz 800x500, 4cc I420, sar 1:1, msk r0x0 g0x0 b0x0 main debug: removing module "freetype" main debug: looking for text renderer module: 2 candidates freetype debug: Building font databases. freetype debug: Took 0 microseconds freetype debug: Using Serif Bold as font from file /usr/share/fonts/truetype/ttf-dejavu/DejaVuSans.ttf freetype debug: using fontsize: 2 main debug: using text renderer module "freetype" main debug: TIMER module_need() : 4.552 ms - Total 4.552 ms / 1 intvls (Avg 4.552 ms) main debug: using visualization2 module "visual" main debug: TIMER module_need() : 84.104 ms - Total 84.104 ms / 1 intvls (Avg 84.104 ms) main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 44100 Hz->44100 Hz Stereo->Stereo main debug: conversion pipeline completed main debug: filter(s) 'f32l'->'f32l' 48510 Hz->44100 Hz Stereo->Stereo main debug: looking for audio filter module: 14 candidates main debug: using audio filter module "samplerate" main debug: TIMER module_need() : 0.375 ms - Total 0.375 ms / 1 intvls (Avg 0.375 ms) main debug: conversion pipeline completed main debug: End of audio preroll main debug: Decoder buffering done in 91 ms main warning: PTS is out of range (-9269), dropping buffer pulse debug: deferring start (190703 us) main debug: looking for video blending module: 1 candidate main debug: using video blending module "blend" main debug: TIMER module_need() : 0.275 ms - Total 0.275 ms / 1 intvls (Avg 0.275 ms) main debug: Detected interlaced video main debug: deinterlace 0, mode blend, is_needed 1 xcb_xv debug: display is visible pulse debug: starting deferred pulse warning: too late by 93760 us pulse debug: changed sample rate to 44186 Hz pulse debug: started pulse warning: too late by 94474 us pulse debug: changed sample rate to 44229 Hz pulse warning: too late by 93532 us pulse debug: changed sample rate to 44272 Hz pulse warning: too late by 92829 us pulse debug: changed sample rate to 44315 Hz pulse warning: too late by 92132 us pulse debug: changed sample rate to 44358 Hz xcb_xv debug: display is visible pulse warning: too late by 91534 us pulse debug: changed sample rate to 44401 Hz xcb_xv debug: display is visible pulse warning: too late by 89482 us pulse debug: changed sample rate to 44440 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible pulse warning: too late by 87529 us pulse debug: changed sample rate to 44479 Hz pulse warning: too late by 84577 us pulse debug: changed sample rate to 44504 Hz main debug: auto hiding mouse cursor pulse warning: too late by 78562 us pulse debug: changed sample rate to 44492 Hz pulse warning: too late by 68015 us pulse debug: changed sample rate to 44422 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor pulse debug: changed sample rate to 44336 Hz xcb_xv debug: display is visible xcb_xv debug: display is visible xcb_xv debug: display is visible main debug: auto hiding mouse cursor I have had issues with VLC in the past- the audio quality was extremely crackly, as if the headphone jack was plugged in only half way, and the sounds were extremely sharp and caused my speakers to make a ringing/vibrating noise... It would eventually start working after I messed around with the audio settings, but it happened every restart. I eventually switched to SMPlayer, but now I need some of the features that VLC offers, but I still can't use VLC. At this point, the audio can not be heard at all, and the method I used before, messing around with the audio settings, isn't getting me anywhere. (note, I reposted this on VideoLan's forums, link is here: http://forum.videolan.org/viewtopic.php?f=13&t=104726) Please let me know if you need more information, or are confused by something I posted! Thanks!

  Read the article

• Ubuntu Studio Audio Issue with Alsa - No sound

  - by ddragon

  Spec: OS: Ubuntu Studio 13.10 64bit CPU: AMD FX 4100 Quad Core Memory: 6GB DDR3 Video: Radeon HD 4250 (embedded on the mobo) Sound: Delta 66 PCI Issue: I just installed Ubuntu Studio and found out that the streaming audio on a few common website such as Youtube had no sound, and also my CD/DVDs via a player. Thus, in the terminal, I entered: sudo alsa force-reload It actually worked but the sound/audio output was MONO and NOT Stereo (the sources are set to stereo stereo), and it seemed I was not able to locate any settings that can switch the output sound to stereo at all. I went through many forums and eventually "autoremove" pulseaudio since many said I would not be able to utilize both pulseaudio and alsa in this case. Now, I have no audio whatsoever. Does this version of Ubuntu only offer mono sound/audio no matter what I do? Then, I may just need to ditch the whole thing and go back to Windows, which I don't want to since Ubuntu Studio offers many great apps, soundfonts etc.. I have also installed restricted extra, but even after rebooting, it did not resolve the issue. In the terminal mode, I pulled "alsamixer" and unmuted almost everything. But still no sound after a reboot. Just an FYI, I have no saved data under this version of Ubuntu Studio yet, so please feel free to let me know whether I need to install Studio 12.10 instead or mess with some installing/uninstalling apps/plug-ins, etc... If it breaks at some point, all I need to do is to re-install it, which I do not mind at all. Or, if you can provide me a step by step instruction to get this work, I do not mind clean install the Studio 13.10 then wait for your instruction AT ALL!

  Read the article

• hp pavilion g6 1250 wireless problems

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Help find correct alsa model for onboard sound (alc887?) that will work with jack and have correct mixer setup

  - by Jazz

  I have a Gigabyte GA-MA74GMT-S2 motherboard. I am using Jack for sound - connected to ALSA. I am running Ubuntu 12.04. aplay -l reports card 0: SB [HDA ATI SB], device 0: ALC887 Analog [ALC887 Analog] The problem is that the default setup, that alsa decides to use, causes stuttering and xruns no matter how generous I set the frames/period or periods/buffer etc. Also, Jack works fine if I plug in an external USB sound system and use that. My processor is an AMD phenom x4 945, and I have 8GB ram, and Video card is Geforce GTX550 Ti, all of which should be quite capable enough. I also tried Pulseaudio and that works fine, but I need to use Jack At first I thought it might be an interrupt conflict, but I have found that adding "options snd-hda-intel model=generic" to /etc/modprobe.d/alsa-base.conf causes it to play correctly, but the limited mixer setup lacks controls I need - so this setup isn't good enough. Still, it seems to prove it isn't a hardware conflict. I have tried many other models, such as 3stack, 6stack, auto and even basic, and they all suffer from the stuttering. I eventually found "options snd-hda-intel model=3stack-6ch-intel" works without stuttering, and mixer is much closer to what it needs to be. Can anyone help on how to get a correct and accurate model for ALSA to use? More info on the hardware that might help... *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff

  Read the article

• How to Find Out Which Devices Are Supported By Solaris 11

  - by rickramsey

  Image of monks gathering on the steps of the main hall in the Tashilhunpo Monastery is courtesy of Alison Whitear Travel Photography. In his update of Brian Leonard's original Taking Your First Steps With Oracle Solaris, Glynn Foster walks you through the most basic steps required to get a version of Oracle Solaris 11 operational: Installing Solaris (VirtualBox, bare metal, or multi-boot) Managing users (root role, sudo command) Managing services with SMF (svcs and svcadm) Connecting to the network (with SMF or manually via dladm and ipadm) Figuring out the directory structure Updating software (with the IPS GUI or the pkg command) Managing package repositories Creating and managing additional boot environments One of the things you'll have to consider as you install Solaris 11 on an x86 system is whether Solaris has the proper drivers for the devices on your system. In the section titled "Installing On Bare Metal as a Standalone System," Glynn shows you how to use the Device Driver utility that's included with the Graphical Installer. However, if you want to get that information before you start installing Solaris 11 on your x86 system, you can consult the x86 Device List that's part of the Oracle Solaris Hardware Compatibility List (HCL). Here's how: Open the Device List. Scroll down to the table. Open the "Select Release" pull-down menu and pick "Solaris 11 11/11." Move over to the "Select Device Type" pull-down menu, and pick the device type. Or "All." The table will list all the devices of that type that are supported by Solaris 11, including PCI ID and vendor. In the coming days the Solaris Hardware Compatibility List will be updated with more Solaris 11 content. Stay tuned. - Rick Ramsey Website Newsletter Facebook Twitter

  Read the article

• Wireless with WEP extremely slow on an Acer Timeline 4810T with a Centrino Wireless-N 1000

  - by noq38

  I've upgraded an Acer Timeline 4810T to Ubuntu 11.10. Everything works fine except for the darn wireless interface (network manager). I just tested the wireless interface over a non-encrypted signal and it works beautifully. The issue is definitely related to WEP. Unfortunately, some of the networks I need to connect to are WEP encrypted, therefore this is a serious issue for me that is preventing me from using Ubuntu on my laptop. This was no problem in 11.04 and prior. Is there a simple solution for this? Any suggestions? Here's more hardware information. Hopefully this helps to debug the network issue: sudo lshw -class network *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:3c:5e:e0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-13-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d2400000-d2401fff lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no Many thanks for your help! I just tested the wireless interface over a non-encrypted signal and it works beautifully. The issue is definitely related to WEP. Unfortunately, some of the networks I need to connect to are WEP encrypted, therefore this is a serious issue for me that is preventing me from using Ubuntu on my laptop. Any suggestions?

  Read the article

• Atheros wireless not working

  - by Chandru1

  I have been struggling hard since i have installed Ubuntu 10.10 but it has been difficult for me to get my wifi working. So here is what i tried. First i checked whether i have the driver using the ifconfig command and it shows the wireless lan driver as wlan0. Next, i tried the command iwlist wlan0 scanning by becoming the root which gave me the output as no scan results. Next, i visited this link https://help.ubuntu.com/community/WifiDocs/Driver/Atheros to see as to what problem my laptop may have. I do own have an ath5k chipset. And as i followed the instructions in the above link in one of the blacklist-ath_pci.conf file had this written in it. For some Atheros 5K RF MACs, the madwifi driver loads buts fails to correctly initialize the hardware, leaving it in a state from which ath5k cannot recover. To prevent this condition, stop madwifi from loading by default. Use Jockey to select one driver or the other. (Ubuntu: #315056, #323830 I am not that good at Linux but i have given it a try. I am desperate to have my wifi working and i would be glad if this community could help. ADDED: If anyone would like to know as to what drivers i am using this is the output. network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wlan0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath5k driverversion=2.6.35-24-generic firmware=N/A latency=168 link=no maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11bg resources: irq:18 memory:d0000000-d000ffff Some more information and output as to what i have done. lsmod | grep ath ath5k 130083 0 mac80211 231541 1 ath5k ath 8153 1 ath5k cfg80211 144470 3 ath5k,mac80211,ath led_class 2633 1 ath5k

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >