Search Results

Search found 2280 results on 92 pages for 'tmp'.

Page 39/92 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

  • OpenVPN bad source address from client

    - by Bogdan
    I have one problem with OpenVPN. There are a lot drops records in the openvpn log file on the server: Mon Oct 22 10:14:41 2012 us=726541 laptop/???:1194 MULTI: bad source address from client [192.168.1.107], packet dropped grep -E "^[a-z]" server.conf ----- port 1194 proto udp dev tun ca data/ca.crt cert data/server.crt key data/server.key dh data/dh1024.pem tls-server tls-auth data/ta.key 0 remote-cert-tls client cipher AES-256-CBC tun-mtu 1200 server 10.10.10.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 8.8.8.8" client-to-client client-config-dir /etc/openvpn/ccd route 10.10.10.0 255.255.255.0 keepalive 10 120 comp-lzo persist-key persist-tun max-clients 5 status /var/log/status-openvpn.log log /var/log/openvpn.log verb 4 auth-user-pass-verify /etc/openvpn/verify.sh via-file tmp-dir /tmp script-security 2 ----- cat ccd/laptop ----- iroute 10.10.10.0 255.255.255.0 ----- cat client.conf ----- remote server ip 1194 client dev tun ping 10 comp-lzo proto udp tls-client tls-auth data/ta.key 1 pkcs12 data/vpn.laptop.p12 remote-cert-tls server #ns-cert-type server persist-key persist-tun cipher AES-256-CBC verb 3 pull auth-user-pass /home/user/.openvpn/users.db ----- According to "Jan Just Keijser - OpenVPN 2 Cookbook" root of the problem is incorrect config options.see the screenshot But, as you see, my config has such options. Could you please help me to solve this problem. @week Verb leverl=6; client log. Mon Oct 22 16:06:02 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Mon Oct 22 16:06:02 2012 /sbin/ifconfig tun0 10.10.10.3 pointopoint 10.10.10.5 mtu 1500 Mon Oct 22 16:06:02 2012 /sbin/route add -net xxxx netmask 255.255.255.255 gw 192.168.1.1 Mon Oct 22 16:06:02 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.10.10.5 Mon Oct 22 16:06:02 2012 Initialization Sequence Completed cat ccd/latop iroute 10.10.10.0 255.255.255.0 ifconfig-push 10.10.10.3 10.10.10.5

    Read the article

  • Passenger connection reset by peer issue

    - by user887372
    I am new to ruby on rails. I am using passenger 3.0.17 to deploy my ruby 3.2.6 project. My project is working fine but i got 500 internal error when i try to upload files on server. I checked my passenger log and found: [ pid=20654 thr=140394143790848 file=ext/nginx/HelperAgent.cpp:933 time=2012-11-01 09:29:57.82 ]: Uncaught exception in PassengerServer client thread: exception: write() failed: Connection reset by peer (104) backtrace: in 'void Client::forwardResponse(Passenger::SessionPtr&, Passenger::FileDescriptor&, const Passenger::AnalyticsLogPtr&)' (HelperAgent.cpp:705) in 'void Client::handleRequest(Passenger::FileDescriptor&)' (HelperAgent.cpp:859) in 'void Client::threadMain()' (HelperAgent.cpp:952) 2012/11/01 09:29:27 [crit] 20691#0: *431 mkdir() "/tmp/passenger-standalone.20640/proxy_temp/2" failed (2: No such file or directory) while reading upstream, client: 124.172.71.55, server: _, request: "GET /assets/jquery.js?body=1 HTTP/1.1", upstream: "passenger:unix:/passenger_helper_server:", host: "test.com:3000", referrer: "http://test.com:3000/" 2012/11/01 09:29:33 [crit] 20691#0: *435 mkdir() "/tmp/passenger-standalone.20640/proxy_temp/3" failed (2: No such file or directory) while reading upstream, client: 124.172.71.55, server: _, request: "GET /assets/background.png HTTP/1.1", upstream: "passenger:unix:/passenger_helper_server:", host: "test.com:3000", referrer: "http://test.com:3000/" [ pid=20654 thr=140394115462912 file=ext/nginx/HelperAgent.cpp:933 time=2012-11-01 09:29:33.543 ]: Uncaught exception in PassengerServer client thread: exception: write() failed: Connection reset by peer (104) backtrace: in 'void Client::forwardResponse(Passenger::SessionPtr&, Passenger::FileDescriptor&, const Passenger::AnalyticsLogPtr&)' (HelperAgent.cpp:705) in 'void Client::handleRequest(Passenger::FileDescriptor&)' (HelperAgent.cpp:859) in 'void Client::threadMain()' (HelperAgent.cpp:952) Please guide me regarding the issue. I am unable to find the reason of this peer reset and failied mkdir(). Thanks in advance

    Read the article

  • Transfering call asterisk to different context

    - by Necronet
    I have a Small and basic PBX, and with two contexts wich basicly are sales and supervisor both have different roles and privileges. I notice that it is possible to transfer call from the same context but it have been imposible to transfer anything to another context. Any insight, i am kinda a rookie on asterisk but currently there is no one else in charge... Thanks Edit This is the extension.conf [supervisor] include => from-internal exten => _40XX,1,Answer exten => _40XX,n,Set(calltime=${STRFTIME(${EPOCH},,%C%y%m%d.%H.%M.%S)}) exten => _40XX,n,Set(CALLEDNUMBER=${EXTEN}) exten => _40XX,n,MixMonitor(/tmp/Para_${CALLEDNUMBER}-${calltime}-De_${CALLERID(num)}.wav) exten => _40XX,n,Dial(SIP/${EXTEN},40,TtRr) exten => _40XX,n,Hangup [sales] include => out-trunksip exten => _41XX,1,Answer exten => _41XX,n,Set(calltime=${STRFTIME(${EPOCH},,%C%y%m%d.%H.%M.%S)}) exten => _41XX,n,Set(CALLEDNUMBER=${EXTEN}) exten => _41XX,n,MixMonitor(/tmp/Para_${CALLEDNUMBER}-${calltime}-De_${CALLERID(num)}.wav) exten => _41XX,n,Dial(SIP/${EXTEN},40,TtRr) exten => _41XX,n,Hangup and the sip.conf looks like this: [supervisor] username=sales secret=ASUPERSECRETPASSWORD type=peer ..... context=supervisor mailbox=supervisor [sales] username=sales secret=ASUPERSECRETPASSWORD type=peer ..... context=sales mailbox=sales What do you suggest in order to get the supervisor with the same privileges that he already has and the sales been able to transfer calls to him

    Read the article

  • Setup git repository on gentoo server using gitosis & ssh

    - by ikso
    I installed git and gitosis as described here in this guide Here are the steps I took: Server: Gentoo Client: MAC OS X 1) git install emerge dev-util/git 2) gitosis install cd ~/src git clone git://eagain.net/gitosis.git cd gitosis python setup.py install 3) added git user adduser --system --shell /bin/sh --comment 'git version control' --no-user-group --home-dir /home/git git In /etc/shadow now: git:!:14665:::::: 4) On local computer (Mac OS X) (local login is ipx, server login is expert) ssh-keygen -t dsa got 2 files: ~/.ssh/id_dsa.pub ~/.ssh/id_dsa 5) Copied id_dsa.pub onto server ~/.ssh/id_dsa.pub Added content from file ~/.ssh/id_dsa.pub into file ~/.ssh/authorized_keys cp ~/.ssh/id_dsa.pub /tmp/id_dsa.pub sudo -H -u git gitosis-init < /tmp/id_rsa.pub sudo chmod 755 /home/git/repositories/gitosis-admin.git/hooks/post-update 6) Added 2 params to /etc/ssh/sshd_config RSAAuthentication yes PubkeyAuthentication yes Full sshd_config: Protocol 2 RSAAuthentication yes PubkeyAuthentication yes PasswordAuthentication no UsePAM yes PrintMotd no PrintLastLog no Subsystem sftp /usr/lib64/misc/sftp-server 7) Local settings in file ~/.ssh/config: Host myserver.com.ua User expert Port 22 IdentityFile ~/.ssh/id_dsa 8) Tested: ssh [email protected] Done! 9) Next step. There I have problem git clone [email protected]:gitosis-admin.git cd gitosis-admin SSH asked password for user git. Why ssh should allow me to login as user git? The git user doesn't have a password. The ssh key I created is for the user expert. How this should work? Do I have to add some params to sshd_config?

    Read the article

  • Problems mounting HPUX LVM+VXFS filesystem on Linux

    - by golimar
    I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

    Read the article

  • How should I monitor memory usage/performance in SunOS/Solaris?

    - by exhuma
    Last week we decided to add some SunOS (uname -a = SunOS bbs-sam-belair 5.10 Generic_127128-11 i86pc i386 i86pc) machines into our running munin instance. First off, the machines are pre-configured appliances, so, I want to avoid touching the system too much without supervision of the service provider. But adding it to munin was fairly easy by writing a small socket-service (if anyone is interested, I put it up on github: https://github.com/munin-monitoring/contrib/tree/master/tools/pypmmn) Yesterday, I implemented/adapted the required plugins for our machines. And here the questions start: First, I have not found a way to determine detailed memory usage values. I get the total memory by running prtconf | grep Memory, and the free memory using vmstat. Fiddling together a munin-plugin, gives me the following graph: This is pretty much uninformative. Compare this to the default plugin for linux nodes which has a lot more detail: Most importantly, this shows me how much memory is actually used by applications. So, first question: Is it possible to get detailed memory information on SunOS with the default system tools (i.e. not using top)? Onto the next puzzle: Seeing the graphs, I noticed activity in the "Paging in/out" graphs, even though the memory graph still has unused memory: Upon further investigation, I found out that df reports that /tmp is mounted on swap. Drilling around on the web, I understood that df will display swap, but in fact, it's mounted as a tmpfs. Now I don't know if this explains the swap activity. The default munin-plugin for solaris uses kstat -p -c misc -m cpu_stat to get these values. I find it already strange that this is using the cpu_stat module. So maybe I simply misinterpret the "paging" graphs? Second question: Do the paging graphs indicate that parts of the memory are paged to disk? Or is the activity caused by file operations in /tmp?

    Read the article

  • Easy_install the wrong version of python modules (Mac OS)

    - by user73250
    I installed Python 2.7 on my Mac. When typing "python" in terminal, it shows: $ python Python 2.7 (r27:82508, Jul 3 2010, 20:17:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "help", "copyright", "credits" or "license" for more information. The Python version is correct here. But when I try to easy_install some modules. The system will install the modules with python version 2.6 which are not able be imported to Python 2.7. And of course I can not do the functions I need in my code. Here's an example of easy_install graphy: $ easy_install graphy Searching for graphy Reading pypi.python.org/simple/graphy/ Reading http://code.Google.com/p/graphy/ Best match: Graphy 1.0.0 Downloading http://pypi.python.org/packages/source/G/Graphy/Graphy- 1.0.0.tar.gz#md5=390b4f9194d81d0590abac90c8b717e0 Processing Graphy-1.0.0.tar.gz Running Graphy-1.0.0/setup.py -q bdist_egg --dist-dir /var/folders/fH/fHwdy4WtHZOBytkg1nOv9E+++TI/-Tmp-/easy_install-cFL53r/Graphy-1.0.0/egg-dist-tmp-YtDCZU warning: no files found matching '*.tmpl' under directory 'graphy' warning: no files found matching '*.txt' under directory 'graphy' warning: no files found matching '*.h' under directory 'graphy' warning: no previously-included files matching '*.pyc' found under directory '.' warning: no previously-included files matching '*~' found under directory '.' warning: no previously-included files matching '*.aux' found under directory '.' zip_safe flag not set; analyzing archive contents... graphy.all_tests: module references __file__ Adding Graphy 1.0.0 to easy-install.pth file Installed /Library/Python/2.6/site-packages/Graphy-1.0.0-py2.6.egg Processing dependencies for graphy Finished processing dependencies for graphy So it installs graphy for Python 2.6. Can someone help me with it? I just want to set my default easy_install Python version to 2.7.

    Read the article

  • VMWare Workstation Linux Host performance tuning

    - by Hoghweed
    I need to improve my linux hosted vmware workstation for using multiple virtual machines at the same time. I feel very stupid I lost a great blog post link which I found last month (and I'm not able to find it again..) so I try to ask here if anyone can help me: This is my host (laptop): 16GB DDR3 Ram HDD Hybrid 750GB 7200 (8GB SSD Cache) Mint 15 x64 Kernel 3.9.7 swappiness set to 10 The above are the important things about the host. So, My need is the ability to run 2 or 3 VMs at the same time. The lack of performance is about the disk, The last time from that blog post I lost, I setup /tmp to be mounted ad a memory partition and in my previous installation that was good, now I'm not able to find a good solution to tweak the things. I think with 16GB o RAM there will be no problems to run multiple VMs, but whe they start to swap or use the /tmp things going bad (guest cursor going too fast after a freeze, guest freeze and so on) Anyone can help me to fit a good host tweak and configuration to get better performance? Thanks in advance

    Read the article

  • tar Cannot open: No such file or directory

    - by Jakobud
    Fresh install of CentOS 5.4 Downloaded the following: http://prdownloads.sourceforge.net/webadmin/webmin-1.510.tar.gz MD5 sum is correct (cdcc09d71d85d81914a90413eaf21d3f). The file is located here: /tmp/webmin-1.510.tar.gz tmp and webmin-1.510.tar.gz both have chmod 777. I am logged in as root. Command: tar -zxfv webmin-1.510.tar Result: tar: v: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: webmin-1.510.tar: Not found in archive tar: Error exit delayed from previous errors Never run across this before. It's like it thinks that v is a file I want to extract, but its one of the command arguments... If I leave out the v... tar -zxf webmin-1.510.tar.gz The command stalls. It doesn't do anything. Just goes to the next line and no prompt comes up. I have to CTRL-C to get back to the prompt and a ls verifies that it didn't extract anything... My first reaction is that its not a valid tar/gz file or something. But the MD5 matches just fine. So I'm at a loss just a bit...

    Read the article

  • Ubuntu init.d script not being called on startup

    - by Mike
    I've got a script in ubuntu 9.04 in init.d that I've set to run on start on with update-rc.d using update-rc.d init_test defaults 99. All of the symlinks are there and the permissions appear to be correct -rwxr-xr-x 1 root root 642 2010-10-28 16:44 init_test mike@xxxxxxxxxx:~$ find /etc -name S99* | grep init_test find: /etc/rc5.d/S99init_test find: /etc/rc4.d/S99init_test find: /etc/rc2.d/S99init_test find: /etc/rc3.d/S99init_test The script runs through source and ./ without issue and behaves correctly. Here is the source of the script: #!/bin/bash ### BEGIN INIT INFO # Provides: init test script # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO start() { echo "hi" echo "start called" >> /tmp/test.log return } stop() { echo "Stopping" } echo "Script called" >> /tmp/test.log case "$1" in start) start ;; stop) stop ;; *) echo "Usage: {start|stop|restart}" exit 1 ;; esac exit $? When the machine starts, I don't see "script called" or "start called" in the test.log at all. Is there anything obvious I'm messing up?

    Read the article

  • Write Fedora.iso to USB and boot it from a Macbook

    - by MTilsted
    I have an .iso image of the full Fedora 16 install (Downloaded from http://fedoraproject.org/en/get-fedora-options#formats as "Fedora 16 DVD") and the question now is: How do I write it on a USB stick, so I can install it on my Mac book? I tried using DD as the install guide said, and that gave me a USB stick which can boot from my PC. But it can't boot from the Mac (The Mac start menu don't show it as a boot option). Edit: I downloaded a live install image, and did this (SSD is my USB 4GB thing) /sbin/mkdosfs -F 32 -n usbdisk /dev/dev/sdd1 sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora-16-i686-Live-KDE.iso /dev/sdd1 And this produced an image which can boot on my pc but not on my mac. This seems to indicate that the --efi is not working, because if it really was EFI it would not boot on a normal pc, would it? I then tried this: (Difference being that I write the image directory to /dev/sdd instead of /dev/sdd1) but this still will not boot on the Mac (it newer shows up at the startup screen on the Mac). sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora- PS: My host Linux is Fedora 13.

    Read the article

  • Jenkins shell command isn't executing

    - by Dmitro
    In Jenkins project I add command for executiong rm /var/www/ru.liveyurist.ru/tmp/* But when I build project I get error: Started by user anonymous Building in workspace /var/www/ru.myproject.ru Updating https://subversion.assembla.com/svn/myproject/trunk At revision 1168 no change for https://subversion.assembla.com/svn/liveexpert/trunk since the previous build [ru.myproject.ru] $ /bin/sh -xe /tmp/hudson7189633355149866134.sh FATAL: command execution failed java.io.IOException: Cannot run program "/bin/sh" (in directory "/var/www/ru.myproject.ru"): java.io.IOException: error=12, Cannot allocate memory at java.lang.ProcessBuilder.start(ProcessBuilder.java:475) at hudson.Proc$LocalProc.<init>(Proc.java:244) at hudson.Proc$LocalProc.<init>(Proc.java:216) at hudson.Launcher$LocalLauncher.launch(Launcher.java:709) at hudson.Launcher$ProcStarter.start(Launcher.java:338) at hudson.Launcher$ProcStarter.join(Launcher.java:345) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:82) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:703) at hudson.model.Build$RunnerImpl.build(Build.java:178) at hudson.model.Build$RunnerImpl.doRun(Build.java:139) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:473) at hudson.model.Run.run(Run.java:1410) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:238) Caused by: java.io.IOException: java.io.IOException: error=12, Cannot allocate memory at java.lang.UNIXProcess.<init>(UNIXProcess.java:164) at java.lang.ProcessImpl.start(ProcessImpl.java:81) at java.lang.ProcessBuilder.start(ProcessBuilder.java:468) ... 16 more Build step 'Execute shell' marked build as failure Finished: FAILURE I started Jenkins from root user. Please advise what can be reason of this error?

    Read the article

  • installing Conkeror on Ubuntu 12.04

    - by Menelaos Perdikeas
    I am reading the instructions on conkeror site (and elsewhere) on how to install conkeror on Ubuntu (I am using Ubuntu 12_04 LTS) and it seems that the correct sequence is: sudo apt-add-repository ppa:xtaran/conkeror sudo apt-get update sudo apt-get install conkeror conkeror-spawn-process-helper The first step (apt-add-repository) seems to execute without a problem, giving the following output: You are about to add the following PPA to your system: Conkeror Debian packages for Ubuntu releases without xulrunner (i.e. for 11.04 Natty and later) More info: https://launchpad.net/~xtaran/+archive/conkeror Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret- keyring /tmp/tmp.Re7pWaDEQF --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv CB29CBE050EB1F371BAB6FE83BE0F86A6D689050 gpg: requesting key 6D689050 from hkp server keyserver.ubuntu.com gpg: key 6D689050: "Launchpad PPA for Axel Beckert" not changed gpg: Total number processed: 1 gpg: unchanged: 1 However, the apt-get update seems unable to fetch packages from the newly added PPA, with its output ending in: Hit http://security.ubuntu.com precise-security/restricted Translation-en Hit http://security.ubuntu.com precise-security/universe Translation-en Err http://ppa.launchpad.net precise/main Sources 404 Not Found Ign http://extras.ubuntu.com precise/main Translation-en_US Err http://ppa.launchpad.net precise/main i386 Packages 404 Not Found Ign http://extras.ubuntu.com precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en W: Failed to fetch http://ppa.launchpad.net/xtaran/conkeror/ubuntu/dists/precise /main/source/Sources 404 Not Found W: Failed to fetch http://ppa.launchpad.net/xtaran/conkeror/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. Accordingly, apt-get-install conkeror fails with: mperdikeas@mperdikeas:~$ sudo apt-get install conkeror Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package conkeror Any ideas what might be wrong ?

    Read the article

  • Can I recover a zpool after it's been exported, given that devices have not been reallocated?

    - by cali-spc
    I had a zpool we'll call 'testpool'. testpool had 3 devices included in it, and a single zfs called 'test'. I needed to move 'test' to a new, smaller pool. I wanted to name the new pool the same name 'testpool'. Basically did the following. zfs send testpool@backup > /tmp/test-dump zpool export -f testpool zpool create -f testpool newdevice zfs receive -F testpool < /tmp/test-dump Unfortunately I found out that the testpool@backup snapshot was the wrong snapshot. Too old. I have yet to reallocate the three devices that were in the OLD testpool. (None of these 3 devices are 'newdevice', they are a separate 3.) Is there any way I can recover data in those devices? I'm thinking since I named the new, smaller pool the same as the old zpool, I'm pretty much SOL. But if not, that would be nice to know. Edit: More info I did a 'zpool import' and got this. bash-3.00# zpool import pool: testpool id: 14781458723915654709 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: testpool ONLINE c5t8d0 ONLINE c5t9d0 ONLINE c5t10d0 ONLINE So I'm guessing I just need the syntax to import this zpool using its numeric identifier, while giving it a new name. S.

    Read the article

  • Installing mysqlnd for php 5.4.9 on CentOs 6.3

    - by kira423
    Okay let me get straight to the point, I am a complete noob, and have never done stuff like this at all, I have read tutorial after tuorial but I cant get anything to work. When I tried to install the rpm file I got this error rpm -Uvh ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm warning: /var/tmp/rpm-tmp.ez4vvd: Header V3 DSA/SHA1 Signature, key ID 00f97f56: NOKEY error: Failed dependencies: php-pdo(x86-64) = 5.4.9-1.el6.remi is needed by php-mysqlnd-5.4.9-1.el6.remi.x86_64 so I tried installing that rpm file and got this error rpm -ivh ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm curl: (9) Server denied you to change to the given directory error: skipping ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm - transfer failed I used the ftp links because I have no idea how else to get them to the server. I think I am getting overly frustrated with this, but I have to get this driver installed for any of my scripts to function correctly. Any help would be greatly appreciated!

    Read the article

  • Correct MySQL username/password, but getting Access Denied error when run from script

    - by Nick
    I'm currently trying to run the following command from within a shell script. /usr/bin/mysql -u username -ppassword -h localhost database It works perfectly fine when executed manually, and not from within a script. When I try to execute a script that contains that command, I get the following error: ERROR 1045 (28000) at line 3: Access denied for user 'username'@'localhost' (using password: YES) I literally copied and pasted the working command into the script. Why the error? As a sidenote: the ultimate intent is to run the script with cron. EDIT: Here is a stripped down version of my script that I'm trying to run. You can ignore most of it up until the point where it connects to MySQL around line 19. #!/bin/sh #Run download script to download product data cd /home/dir/Scripts/Linux /bin/sh script1.sh #Run import script to import product data to MySQL cd /home/dir/Mysql /bin/sh script2.sh #Download inventory stats spreadsheet and rename it cd /home/dir /usr/bin/wget http://www.url.com/file1.txt mv file1.txt sheet1.csv #Remove existing export spreadsheet rm /tmp/sheet2.csv #Run MySQL queries in "here document" format /usr/bin/mysql -u username -ppassword -h localhost database << EOF --Drop old inventory stats table truncate table table_name1; --Load new inventory stats into table Load data local infile '/home/dir/sheet1.csv' into table table_name1 fields terminated by ',' optionally enclosed by '"' lines terminated by '\r\n'; --MySQL queries to combine product data and inventory stats here --Export combined data in spreadsheet format group by p.value into outfile '/tmp/sheet2.csv' fields terminated by ',' optionally enclosed by '"' lines terminated by '\r\n'; EOF EDIT 2: After some more testing, the issue is with the << EOF that is at the end of the command. This is there for the "here document". When removed, the command works fine. The problem is that I need << EOF there so that the MySQL queries will run.

    Read the article

  • rsnapshot - not correctly archiving mysql databases

    - by Tiffany Walker
    My rsnapshot configuration: snapshot_root /.snapshots/ backup /home/user localhost/ backup_script /usr/local/backup_mysql.sh localhost/mysql/ Using this file: NOW=$(date +"%m-%d-%Y") # mm-dd-yyyy format FILE="" # used in a loop ### Server Setup ### #* MySQL login user name *# MUSER="root" #* MySQL login PASSWORD name *# MPASS="YOUR-PASSWORD" #* MySQL login HOST name *# MHOST="127.0.0.1" #* MySQL binaries *# MYSQL="$(which mysql)" MYSQLDUMP="$(which mysqldump)" GZIP="$(which gzip)" # get all database listing DBS="$($MYSQL -u $MUSER -h $MHOST -p$MPASS -Bse 'show databases')" # start to dump database one by one for db in $DBS do FILE=$BAK/mysql-$db.$NOW-$(date +"%T").gz # gzip compression for each backup file $MYSQLDUMP --single-transaction -u $MUSER -h $MHOST -p$MPASS $db | $GZIP -9 > $FILE done It dumps the databases under / I then tried with the following: http://bash.cyberciti.biz/backup/rsnapshot-remote-mysql-backup-shell-script/ I got: rsnapshot hourly ---------------------------------------------------------------------------- rsnapshot encountered an error! The program was invoked with these options: /usr/bin/rsnapshot hourly ---------------------------------------------------------------------------- ERROR: backup_script /usr/local/backup_mysql.sh returned 1 WARNING: Rolling back "localhost/mysql/" ls -la /.snapshots/hourly.0/localhost/mysql total 8 drwxr-xr-x 2 root root 4096 Nov 23 17:43 ./ drwxr-xr-x 4 root root 4096 Nov 23 18:20 ../ What exactly am I doing wrong? EDIT: # /usr/local/backup_mysql.sh *** Dumping MySQL Database *** Database> information_schema..cphulkd..eximstats..horde..leechprotect..logaholicDB_ns1..modsec..mysql..performance_schema..roundcube..test.. *** Backup done [ files wrote to /.snapshots/tmp/mysql] *** root@ns1 [~]# ls -la /.snapshots/tmp/mysql total 8040 drwxr-xr-x 2 root root 4096 Nov 23 18:41 ./ drwxr-xr-x 3 root root 4096 Nov 23 18:41 ../ -rw-r--r-- 1 root root 1409 Nov 23 18:41 cphulkd.18_41_45pm.gz -rw-r--r-- 1 root root 113522 Nov 23 18:41 eximstats.18_41_45pm.gz -rw-r--r-- 1 root root 4583 Nov 23 18:41 horde.18_41_45pm.gz -rw-r--r-- 1 root root 71757 Nov 23 18:41 information_schema.18_41_45pm.gz -rw-r--r-- 1 root root 692 Nov 23 18:41 leechprotect.18_41_45pm.gz -rw-r--r-- 1 root root 2603 Nov 23 18:41 logaholicDB_ns1.18_41_45pm.gz -rw-r--r-- 1 root root 745 Nov 23 18:41 modsec.18_41_45pm.gz -rw-r--r-- 1 root root 138928 Nov 23 18:41 mysql.18_41_45pm.gz -rw-r--r-- 1 root root 1831 Nov 23 18:41 performance_schema.18_41_45pm.gz -rw-r--r-- 1 root root 3610 Nov 23 18:41 roundcube.18_41_45pm.gz -rw-r--r-- 1 root root 436 Nov 23 18:41 test.18_41_47pm.gz MySQL Backup seems fine.

    Read the article

  • Cant access folder on server- Permission denied

    - by Michal Korzeniowski
    I am running a vps with ubuntu 11.04. After a clean Modx install I've tried to access http://www.encepence.pl/manager and I've got a permission denied by my server. the thing is that I can easily access any other folder under that domain and modify this folder(manager) content via ftp. I’ve tried modifying virtual host with that <Directory /var/www/blackflow/data/www/encepence.pl/manager/> Options Indexes FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> But it didn't work. <Directory /var/www/blackflow/data/www/encepence.pl> Options -ExecCGI -Includes php_admin_value open_basedir "/var/www/blackflow/data:." php_admin_flag engine on </Directory> <VirtualHost 192.166.219.34:80 > ServerName encepence.pl CustomLog /var/www/httpd-logs/encepence.pl.access.log combined DocumentRoot /var/www/blackflow/data/www/encepence.pl ErrorLog /var/www/httpd-logs/encepence.pl.error.log ServerAdmin [email protected] ServerAlias www.encepence.pl SuexecUserGroup blackflow blackflow AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml AddType application/x-httpd-php-source .phps php_admin_value open_basedir "/var/www/blackflow/data:." php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f [email protected]" php_admin_value upload_tmp_dir "/var/www/blackflow/data/mod-tmp" php_admin_value session.save_path "/var/www/blackflow/data/mod-tmp" VirtualDocumentRoot /var/www/blackflow/data/www/%0 </VirtualHost> Any ideas on what might have gone wrong?

    Read the article

  • xauth, ssh and missing home directory

    - by flolo
    We have several servers, and normaly everything works fine, except now... we get a new aircondition installed. This takes 36 hours and for this time almost all servers got shutdown, only 2 remaining servers run for the most important tasks (i.e. accepting incoming email, delivering some important websites, login-server). Everybody was informed that when they need appropiate data from the homedirs they should fetch it before take down. Long story short: Someone realized that he have run a certain program on one of the servers. No Problem, he can remote login into our login server and run the programm there without home directory (binaries are local and necessary information can be copied to the /tmp). That works like a charm until... ... the user needs to run a GUI programm. I find no easy way to make it running, usually ssh -Y honk@loginserver is enough but now the homedirectory is missing and ssh is not able to copy the cookies into ~/.Xauthority (as the file server with the home directories is down). Paranoid as all systemadmins all X-Server just listen locally not on tcp ports, so no remote X connection possible SSH config is waterproof - i.e. no way to set environment variables. My Problem is, that the generated proxy MIT cookie from ssh get lost as the .Xauthority doesnt exist. If I could retrieve it somehow I could reenter it a .Xauthority in /tmp. The only other option (besides changing the config) which came to my mind is, makeing a tunnel (netcat, or better ssh) from the remote host to the loginserver and copy the cookie manually (not sure if it the tcp-unix domain socket stuff works as expected). Any good suggestions (for the future - now our servers are already up)?

    Read the article

  • Backup script to FTP with timed subfolders

    - by Frederik Nielsen
    I want to make a backup script, that makes a .tar.gz of a folder I define, say fx /root/tekkit/world This .tar.gz file should then be uploaded to a FTP server, named by the time it was uploaded, for example: 07-10-2012-13-00.tar.gz How should such backup script be written? I already figured out the .tar.gz part - just need the naming and the uploading to FTP. I know that FTP is not the most secure way to do it, but as it is non-sensitive data, and FTP is the only option I have, it will do. Edit: I ended up with this script: #!/bin/bash # have some path predefined for backup unless one is provided as first argument BACKUP_DIR="/root/tekkit/world/" TMP_DIR="/tmp/tekkitbackup/" FINISH_DIR="/tmp/tekkitfinished/" # construct name for our archive TIME=$(date +%d-%m-%Y-%H-%M) if [ $1 ]; then BACKUP_DIR="$1" fi echo "Backing up dir ... $BACKUP_DIR" mkdir $TMP_DIR cp -R $BACKUP_DIR $TMP_DIR cd $FINISH_DIR tar czvfp tekkit-$TIME.tar.gz -C $TMP_DIR . # create upload script for lftp cat <<EOF> lftp.upload.script open server user user password lcd $FINISH_DIR mput tekkit-$TIME.tar.gz exit EOF # start backup using lftp and script we created; if all went well print simple message and clean up lftp -f lftp.upload.script && ( echo Upload successfull ; rm lftp.upload.script )

    Read the article

  • Postfix cannot deliver mail to Cyrus mailbox on Ubuntu 11.10 server

    - by user105804
    I have installed and configured Postfix and Cyrus IMAP server with webcyradm according to this document - http://www.delouw.ch/linux/Postfix-Cyrus-Web-cyradm-HOWTO/html/index.html . I can access webcyradm interface, I can create new domains and new users, and I can login via IMAP after creating the user account. However, Postfix fails to deliver mail to cyrus mailboxes. Mail log contains errors shown below. Installing any IMAP server other than cyrus is not an option because it is needed by the web application. Please advise me how to make Postfix deliver email to cyrus mailboxes. The solution should not necessary include web-cyradm, but there should be a web interface for managing mail domains and mailboxes as user-friendly as possible. Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: accepted connection Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: lmtp connection preauth'd as postman Dec 30 22:46:17 acer-tower postfix/cleanup[4868]: 065D5240035: message-id=<[email protected]> Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: verify_user(user.imap0001) failed: Mailbox does not exist Dec 30 22:46:17 acer-tower postfix/bounce[4867]: 6C6CA24185C: sender non-delivery notification: 065D5240035 Dec 30 22:46:17 acer-tower postfix/qmgr[4833]: 065D5240035: from=<>, size=3372, nrcpt=1 (queue active) Dec 30 22:46:17 acer-tower postfix/qmgr[4833]: 6C6CA24185C: removed Dec 30 22:46:17 acer-tower postfix/lmtp[4866]: 53421240372: to=<[email protected]>, orig_to=<[email protected]>, relay=home.webshop-software.ch[/tmp/lmtp], delay=165, delays=165/0.02/0.17/0.09, dsn=5.1.1, status=bounced (host home.webshop-software.ch[/tmp/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))

    Read the article

  • Upstart can't determine my process' pid

    - by sirlark
    I'm writing an upstart script for a small service I've written for my colleagues. My upstart job can start the service, but when it does it only outputs queryqueue start/running; note the lack of a pid as given for other services. #/etc/init/queryqueue.conf description "Query Queue Daemon" author "---" start on started mysql stop on stopping mysql expect fork env DEFAULTFILE=/etc/default/queryqueue umask 007 kill timeout 30 pre-start script #if [ -f "$DEFAULTFILE" ]; then # . "$DEFAULTFILE" #fi [ ! -f /var/run/queryqueue.sock ] || rm -rf /var/run/queryqueue.sock #exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script script #Originally this stanza didn't exist at all if [ -f "$DEFAULTFILE" ]; then . "$DEFAULTFILE" fi exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script post-start script for i in `seq 1 5` ; do [ -S /var/run/queryqueue.sock ] && exit 0 sleep 1 done exit 1 end script The service in question is a python script, which when run without error, forks using the code below right after checking command line options and basic environmental sanity, so I tell upstart to expect fork. pid = os.fork() if pid != 0: sys.exit(0) The script is executable, and has a python shebang. I can send the TERM signal to the process manually, and it quits gracefully. But running stop queryqueue claims queryqueue stop/waiting but the process is still alive and well. Also, it's logs indicate it never received the kill signal. I'm guessing this is because upstart doesn't know which pid it has. I've also tried expect daemon and leaving the expect clause out entirely, but there's no change in behaviour. How can I get upstart to determine the pid of the exec'd process

    Read the article

  • Can't find gnutls ibrary when executing rpmbuild under non-root

    - by Rilindo
    I am trying to build ntgs from the latest source, using the .spec from rpmforge - as non-root via rpmbuild. During the compile, it fails at this step: checking for GNUTLS... no configure: error: ntfsprogs crypto code requires the gnutls library. error: Bad exit status from /var/tmp/rpm-tmp.78913 (%build) However, I can compile it successfully outside of rpmbuild. So it sounds like it just the matter of library being seen during the build. However, I can confirm that rpmbuild can see the library that gnutls resides: [foo@bar ~]$ rpmbuild -E '%{_libdir}' rpmbuild/SPECS/ntfsprogs.spec /usr/lib Library location: [foo@bar ntfs-3g_ntfsprogs-2012.1.15]$ /sbin/ldconfig -p | grep -i gnutls libgnutls.so.13 (libc6) => /usr/lib/libgnutls.so.13 libgnutls.so (libc6) => /usr/lib/libgnutls.so libgnutls-openssl.so.13 (libc6) => /usr/lib/libgnutls-openssl.so.13 libgnutls-openssl.so (libc6) => /usr/lib/libgnutls-openssl.so libgnutls-extra.so.13 (libc6) => /usr/lib/libgnutls-extra.so.13 libgnutls-extra.so (libc6) => /usr/lib/libgnutls-extra.so What would cause the problem of the library not being seen when you build a RPM? EDIT: Oh yeah, I am running Centos 5.5.

    Read the article

  • (help help!!!) Easy_install the wrong version of python modules (Mac OS)

    - by user71415
    I installed Python 2.7 in my mac. When typing "python" in terminal, it shows: Ma-Xiaolongs-MacBook-Pro-2:~ MaXiaolong$ python Python 2.7 (r27:82508, Jul 3 2010, 20:17:05) [GCC 4.0.1 (Apple Inc. build 5493)] on darwin Type "help", "copyright", "credits" or "license" for more information. The Python version is correct here. But when I try to easy_install some modules. The system will install the modules with python version 2.6 which are not able be imported to Python 2.7. And of course I can not do the functions I need in my code. Here's an example of easy_install graphy: Ma-Xiaolongs-MacBook-Pro-2:~ MaXiaolong$ easy_install graphy Searching for graphy Reading pypi.python.org/simple/graphy/ Reading http://code.google.com/p/graphy/ Best match: Graphy 1.0.0 Downloading http://pypi.python.org/packages/source/G/Graphy/Graphy- 1.0.0.tar.gz#md5=390b4f9194d81d0590abac90c8b717e0 Processing Graphy-1.0.0.tar.gz Running Graphy-1.0.0/setup.py -q bdist_egg --dist-dir /var/folders/fH/fHwdy4WtHZOBytkg1nOv9E+++TI/-Tmp-/easy_install-cFL53r/Graphy-1.0.0/egg-dist-tmp-YtDCZU warning: no files found matching '.tmpl' under directory 'graphy' warning: no files found matching '.txt' under directory 'graphy' warning: no files found matching '.h' under directory 'graphy' warning: no previously-included files matching '.pyc' found under directory '.' warning: no previously-included files matching '~' found under directory '.' warning: no previously-included files matching '.aux' found under directory '.' zip_safe flag not set; analyzing archive contents... graphy.all_tests: module references file Adding Graphy 1.0.0 to easy-install.pth file Installed /Library/Python/2.6/site-packages/Graphy-1.0.0-py2.6.egg Processing dependencies for graphy Finished processing dependencies for graphy So it installs graphy for python 2.6. Can someone help me with it? I just want to set my default easy_install version as 2.7... Thank you very much!!!!!!

    Read the article

  • Custom keyboard map is causing issues with stuck keys

    - by Grumbel
    I have a Microsoft Ergonomic 4000 keyboard and I am running a custom keymap (dvorak with some stuff for umlauts): http://pingus.seul.org/~grumbel/tmp/md5/b054e11505c88e1bfc6ebd5da46bdb78-xmodmap_pke http://pingus.seul.org/~grumbel/tmp/md5/f5e42a5b8ba4a034c5945f719b3d2608-xmodmap_pm This used to work fine for years and it still does, except that I am now having issues with a stuck Mode_switch key. When I hit Control_R and Mode_switch at the same time (happens a lot by accident), the Mode_switch key gets into a 'stuck' state, all letters I type afterwards come out in their umlaut form as if Mode_switch is pressed. I can unstuck the Mode_switch by again hitting Control_R and Mode_switch at the same time, but that leaves Gnome in a broken state where it doesn't react to my Gnome keyboard shortcuts any longer. The key presses themselves are still registered by the window manager as one can see changes in the applications (cursor in Gnome Terminal will turn into an unfilled rect, as if the application lost focus), but don't trigger the bound action. Does anybody have a clue what could be causing this? Or does anybody has an idea how I could debug this? xev doesn't seem to help here, as it is reporting normal KeyPress/KeyRelease events, even when the key is stuck. Also the Gnome key bindings don't get reported at all when its in the 'broken' state. I assume they are captured by the window manager before they even reach xev. I am using Ubuntu 10.04 with Gnome and Metacity, I have disabled all OpenGL related effects, so Compiz shouldn't interfere. Some general info on which applications are involved in Gnomes key binding handling would be helpful as well, as I assume its metacity, but restarting metacity doesn't fix the issue.

    Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >