Search Results

Search found 61576 results on 2464 pages for 'windows 7 tips'.

Page 39/2464 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Dual Boot Windows 8 UEFI and Ubuntu 12.10

  - by 0x4a6f4672

  I have got a new Samsung Series 7 laptop with Windows 8 where I tried to install Ubuntu. It is a 64-Bit system which uses UEFI and has "Secure Boot" switched on in the BIOS by default. After I switched if off (and set it to "UEFI and CSM OS") I was able to install Ubuntu (Ubuntu 11.10, which recognized Windows as Windows Vista, although it is Windows 8), by booting from CD with Settings/Change PC Settings/General/Advanced Startup in Windows 8. But after the installation and the restart of the machine somehow ignored Ubuntu and booted only Windows 8. Then I tried to reinstall Ubuntu 12.10. It still only boots Windows 8. Then I tried Boot Repair, which was not really helpful. Any ideas how I can create a dual boot system with Windows 8 and Ubuntu 12.10 ? Here is the link that Boot Repair generated: http://paste.ubuntu.com/1368624/ Is it necessary to create an extra EFI partition with GParted?

  Read the article

• Will WUBI Installer work on Windows 8 that was upgraded from Windows 7?

  - by Dylan

  I upgraded my PC from Windows 7 to Windows 8, and wanted to reinstall Ubuntu alongside Windows 8. However, I read in many places that Windows 8 causes many new problems with the installation through WUBI, and doesn't work on computers pre-installed with Windows 8 because of a problem in the BiOS or something of that sort. Does it work on computers that were upgraded to Windows 8? I'd like to get a confirmation before I go ahead and try to install it. Thanks!

  Read the article

• Windows 8.1 Update 1 Disk Usage 100%

  - by Gookjin Jeong

  Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

  Read the article

• RRAS won’t start with 8007042a or event ID 7024, aka the “routing remote access unable to load Iprtrmgr.dll”

  - by KCotreau

  History: The history of this error, which has mostly gone unsolved, dates back to Windows 2000. Platforms affected: Windows Server 2008 R2, Server 2008, Server 2003 R2, Server 2003, Server 2000 (both 32-bit and 64-bit installs are affected). Error Messages Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 2 (0x2). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 31 (0x1F). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 20205 (0x4EED). Event ID: 7024 The Routing and Remote Access service terminated with service-specific error 193 (0xC1). Event ID: 20103 Unable to load C:\WINDOWS\System32\iprtrmgr.dll . (32-bit installs). Event ID: 20103 Unable to load C:\WINDOWS\SysWOW64\iprtrmgr.dll . (64-bit installs).

  Read the article

• Event ID 8021 The browser was unable to retrieve a list of servers from the browser master

  - by Ash

  We have a LAN where workstations are randomly losing network connectivity for brief moments of time. The workstations can also take a long time to login to the domain. During our troubleshooting we have found an error log on a few Windows 7 workstations: Warning BROWSER 8021 The browser was unable to retrieve a list of servers from the browser master \\random-pc on the network \Device\NetBT_Tcpip_{BBABCDE9-D8A0-4399-93F2-492FE0848B12}. The data is the error code. What do these errors mean? What computers should have the Computer Browser service enabled, workstations and/or servers? The environment is a mix of Windows 7 & Windows XP workstations on a Windows Server SBS 2011 SP1 domain.

  Read the article

• Can't connect disk management to remote XP PC from local Win7/Server 2008

  - by Grez

  Scenario as follows: support technicians using Windows 7 PC's or Server 2008 terminal server are unable to connect Disk Management MMC snap in to a remote PC when the remote device is running Windows XP. "Disk management could not start Virtual Disk Service (VDS) on ". This can happen if the remote computer does not support VDS, or if a connection cannot be established because it was blocked by Windows Firewall." Connecting from another XP machine or 2003 server to the same XP machines works fine. Even connecting from XP/2003 to the Win7 or 2008 server works fine. Windows firewall disabled on all devices. I'm guessing this is something to do with the fact that XP uses logical disk manager service whereas Win7/2008 use Virtual disk manager service. But there doesn't seem to be any way to use logical disk manager service from 7/2008 to connect to XP...

  Read the article

• Synergy reports connected but mouse doesn't hop between screens

  - by tor

  I'm using synergy between two windows computers (Windows 7 32-bit, acting as the server part, and Windows XP 32-bit, as a client). I'm running the server part as admin, as suggested in some posts when running synergy in Vista/7, and I think it's properly configured in the server part: It reports on both sides that the connection has succesfully been established, but there's no way to move the mouse from one screen to the other (neither from server2client, nor client2server). Any ideas?

  Read the article

• windows service application run fine on windows XP but crashes on windows7

  - by Abbas Siddiqui

  I am sorry If my question asked before, I search extensively but didn't found. If present please post the link of that question. I have developed windows service that works fine on windows xp , when I installed it on windows7 it installed and works fine for few minutes, after that is crashes and gives the following error message. has stopped working windows is checking for the solution to the problem. the log entry is as follows Fault bucket 1155193276, type 5 Event Name: CLR20r3 Response: Not available Cab Id: 0 Problem signature: P1: windowsserviceapp.exe P2: 1.0.0.0 P3: 4bf29a85 P4: System.Windows.Forms P5: 2.0.0.0 P6: 4a275ebd P7: 16cf P8: 159 P9: System.ComponentModel.Win32 P10: Attached files: C:\Users\DELL\AppData\Local\Temp\WERF98D.tmp.WERInternalMetadata.xml These files may be available here: C:\Users\DELL\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_windowsserviceap_89ea5da5168ff1535681aa613b5f7bf2b1636dc_111d24f1 Analysis symbol: Rechecking for solution: 0 Report Id: 24dc8c83-62a1-11df-b1ee-00271352d813

  Read the article

• Asus MyCinema U3100mini Choppy

  - by dsimcha

  I'm running an Asus MyCinema U3100mini ATSC on Windows 7 64-bit. When I play live TV in Windows Media Center, it's very choppy and uses 500+ MB of RAM, I'm guessing due to the hard drive buffering functionality. Is there any way to disable the live TV pause buffer completely? If not, can anyone recommend alternative software that: Works with the MyCinema. Is lightweight and not horribly bloated with features I'll never use like Windows Media Center is. Edits: This is a dual boot system. I've discovered that the tuner actually works fine on XP. It also works fine on my other computer, which has slower hardware and also runs Windows 7 64-bit. The problem actually seems to be with playback at large screen sizes, not with hard drive buffering. Everything works fine below a certain window size and fails for large windows or full screens. Also, the same thing seems to happen whether playing live or recorded TV. As far as the obvious stuff goes, I have the latest video drivers from ATI for my Radeon x1050.

  Read the article

• Installation is forbidden by system policy

  - by Frost

  Note: I'm posting this here on Superuser as I think the issue is more related to the Windows Installer than the game itself. My friend is having trouble installing Company of Heroes and CoH: Opposing fronts under Windows 7. A couple of percent into the installation, when the C/C++ runtime is being installed, the install fails with the following message: An error occured while installing the Windows Installer package "C:\Users\...\AppData\Local\Temp\...\...\vcredist.msi". Error code 10212:00000659: MsiInstallProductW returned 00000659: This installation is forbidden by system policy. Contact your system administrator. We have tried: Making sure that any previous installations have been completely removed, including searching and deleting any files/folders/registry entries matching "THQ" (the publisher) and "Relic" (the developer). Installing into a brand new user account Running Setup.exe as administrator Running Compatibility check for Setup.exe, which suggested Windows XP but failed when trying those settings out Does anyone know what might be the cause of the system policy error?

  Read the article

• VPN clients under PROXY SERVER

  - by Kumar P

  I want to set proxy server for my windows xp desktops. Currently using Windows 2003 as server. But client machines using VPN clients for our work. I installed and run FREEPROXY for proxy connections. But after i installed proxy, i can't connect VPN. What can i do here for setup proxy server with vpn connection. If change server from windows to linux, i am ready for it too.

  Read the article

• Weird File Corruption

  - by Viet Norm

  My Windows 8 broke few days ago and I had to reinstall it (see Can't boot Windows 8). Afterwards, I found some corrupt files on C drive. Ok, it happens, but this is really weird. Corrupt files seem to contain stuff from Windows registry. For example, this is beginning of one of the corrupt files: hbin ` PÿÿÿT h i s z o n e c o n t a i n s w e b s i t e s t h a t y o u t r u s t n o t t o d a m a g e y o u r c o m p u t e r o r y o u r f i l e s ... I googled and found that 'hbin' often refers to "hive bin" of Windows registry. Then I searched the registry for the readable part of corrupt data, and found the text in some registry value (not the text above, but something I found in another corrupt file. I'm assuming the above is also from registry). My question is, how could this happen? Was it a virus, or did Windows somehow corrupt these files while attempting to repair itself?

  Read the article

• TCP Windows Size vs Socket Buffer Size on Windows

  - by Patrick L

  I am new to Windows networking. When people talk about TCP tuning on Windows platform, they always mention about TCP Window Size. I am wondering whether Windows uses the concept of "Socket Buffer Size"? On Windows XP, the TCP window size is fixed. We can set it using the TCPWindowSize registry value. How about Socket Buffer Size? How can we set Socket Buffer size on Windows? Can we set it to a value different from TCP window size?

  Read the article

• Power Outage Interrupted Upgrade from Windows Vista Ultimate to 7 Ultimate, Reverted to Vista, Now Vista is failing... What Next?

  - by tednewk

  I was in the midst of what seemed to be a successful upgrade from Vista Ultimate to 7 Ultimate when there was a brief blackout. The upgrade failed and Windows reverted back to Vista. Now Vista is very slow to boot, has problems waking back-up from inactivity and quickly loses it's wireless connection. The wake-up problem manifests itself as the mouse is clearly shown on a black screen but I have no access to the Desktop or Taskbar or Explorer. Even Alt-Ctrl-Delete doesn't seem to work. No task menu, no reboot. Hitting the reset button reboots the machine with the usual Black Screen warnings offering Safe Mode. I tried to do a system restore to a point before the upgrade. That didn't seem to work. My guess is that my system is a mutant with parts of Vista and parts of 7 crashing each other. I would like avoid a clean install if at all possible to avoid reinstalling other software. What should I try now? My thoughts are: My a system back-up to lock the computer in place Trying a second 7 upgrade If that appears to be working make another back-up If not reload back-up and try a repairing Vista from DVD. If that appears to work make another back-up, let system stablize about a week then try 7 install again If that doesn't work are there any other options to try before settling for a clean install? Another complication, I am doing this by "remote control". I'm traveling with my job and I'll be talking my son through it over the phone. (Kind of like the landing the 747 cliche from all the 70's adventure shows!) So is there a way of simplifying the steps? Thanks Ted

  Read the article

• Using my System as the server- need advice

  - by Ashwin

  We are deploying my web application in my system in jboss. And I am planning to use my system as the server as well. There are no html pages or jsp pages deployed. The client requests for resources and the server provides the resources in the form of objects. We are also using databases(Postgresql-15 tables) as the database server(this will also reside in my machine). My system configuration is Windows Vista, 2.3 GHZ, 4GB Ram, 32 bit. There can be many requests coming in at the same time. So is this configuration enough? Should we go with a different Operating System like Windows Server? I have never used Windows Server OS. How will it be different from other windows operating systems? Or if you feel please some other OS will be good in this situation, please suggest.

  Read the article

• Dual Boot Win8 and Win7 - Win 7 fails while booting

  - by bjan

  Below are my dual boot settings. Both are on different partitions, default is Windows 8. Both were working fine. There are multiple users of this machine, few run 8 while few 7. All 7's users are novice and they use Internet only. I frequently update Windows 8 but not 7. Few weeks ago, Win 7 stopped booting. Machine gets restarted while booting with 7(Windows 7 start up glowing-Win-logo-screen does not appear) and the 8's loader reappears. Win 7's partition still exists and contains Windows folder What steps should i take to check the problem?

  Read the article

• Can the Installation Monitor from the Win2K Resource kit be used on newer OS's?

  - by Scott Chamberlain

  Can the utility "Installation Monitor" from the Windows 2000 Resource Kit Tools for administrative tasks be used on newer OS's, specifically, Windows Server 2008 R2. The main thing I am concerned about is it may error will not track things correctly without letting me know that that it errored due to how Windows has changed between 2000 and today. If that is not the correct tool to use to monitor what a application is writing to the hard drive and registry, can you recommend me what I should use instead?

  Read the article

• How to make mouse in Windows 7 act the same as Windows XP

  - by Phenom

  In Windows XP using TweakUI I could enable an option so that when my mouse goes over an inactive window, it makes that window the active window. There is also another separate option so that if the window becomes active, it automatically becomes the topmost window. I like to enable the former but not the latter. For Windows 7 I have not been able to find the same thing. What I found instead is an option inside windows that does something similar. If I move my mouse over an inactive window, I have to hover over it for a while before it becomes active. It is not instantaneous. The second problem is that once it does become active, it automatically makes itself the topmost window, covering other things I don't want covered. In summary, this is what I want in Windows 7: When my mouse goes over an inactive window, it immediately makes it the active window. When it activates the window, it does not raise it above other windows.

  Read the article

• WPF UserControl Style results in error message

  - by Didier

  Hi I'm new in WPF so I try to create a WPF UserControl. My problem is about the style of the user control I've Created. On a design time I got this error message Can only base on a Style with target type that is base type 'RichTextBox'. at System.Windows.Style.Seal() at System.Windows.StyleHelper.UpdateStyleCache(FrameworkElement fe, FrameworkContentElement fce, Style oldStyle, Style newStyle, Style& styleCache) at System.Windows.FrameworkElement.OnStyleChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) at System.Windows.DependencyObject.OnPropertyChanged(DependencyPropertyChangedEventArgs e) at System.Windows.FrameworkElement.OnPropertyChanged(DependencyPropertyChangedEventArgs e) at System.Windows.DependencyObject.NotifyPropertyChange(DependencyPropertyChangedEventArgs args) at System.Windows.DependencyObject.UpdateEffectiveValue(EntryIndex entryIndex, DependencyProperty dp, PropertyMetadata metadata, EffectiveValueEntry oldEntry, EffectiveValueEntry& newEntry, Boolean coerceWithDeferredReference, OperationType operationType) at System.Windows.DependencyObject.InvalidateProperty(DependencyProperty dp) at System.Windows.FrameworkElement.UpdateStyleProperty() at System.Windows.TreeWalkHelper.InvalidateStyleAndReferences(DependencyObject d, ResourcesChangeInfo info, Boolean containsTypeOfKey) at System.Windows.TreeWalkHelper.OnResourcesChanged(DependencyObject d, ResourcesChangeInfo info, Boolean raiseResourceChangedEvent) at System.Windows.TreeWalkHelper.OnResourcesChangedCallback(DependencyObject d, ResourcesChangeInfo info) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker1._VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.VisitNode(FrameworkElement fe) at System.Windows.DescendentsWalker1.VisitNode(DependencyObject d) at System.Windows.DescendentsWalker1.WalkLogicalChildren(FrameworkElement feParent, FrameworkContentElement fceParent, IEnumerator logicalChildren) at System.Windows.DescendentsWalker1.WalkFrameworkElementLogicalThenVisualChildren(FrameworkElement feParent, Boolean hasLogicalChildren) at System.Windows.DescendentsWalker1.IterateChildren(DependencyObject d) at System.Windows.DescendentsWalker`1.StartWalk(DependencyObject startNode, Boolean skipStartNode) at System.Windows.TreeWalkHelper.InvalidateOnResourcesChange(FrameworkElement fe, FrameworkContentElement fce, ResourcesChangeInfo info) at System.Windows.ResourceDictionary.NotifyOwners(ResourcesChangeInfo info) at System.Windows.ResourceDictionary.EndInit() at MS.Internal.Host.Designer.OnAppResourcesChanged(Object sender, EventArgs e) at MS.Internal.Host.Designer.get_View() at MS.Internal.Designer.VSDesigner.Load() at MS.Internal.Designer.VSIsolatedDesigner.VSIsolatedView.Load() at MS.Internal.Designer.VSIsolatedDesigner.VSIsolatedDesignerFactory.Load(IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.BootstrapProxy.LoadDesigner(IsolatedDesignerFactory factory, IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.BootstrapProxy.LoadDesigner(IsolatedDesignerFactory factory, IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.Load() at MS.Internal.Designer.DesignerPane.LoadDesignerView() And at a run time An error Message type XamlParseException Occurs and the message is: Cannot create instance of 'RichTextBox' defined in assembly 'PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'. Can only base on a Style with target type that is base type 'RichTextBox'. Error at object 'System.Windows.Controls.Grid' in markup file 'NameSpace;component/usercontrols /myusercontrol.xaml' Line 125 Position 14. My user control have 3 richtextboxes 1 textbox and 3 dropdownlist and about 10 buttons. I think The problem is about to define the style of my user control, can anyone help me to do this. Thanks

  Read the article

• Windows 7 is shutting down unexpectedly, according to the logs.

  - by dlamblin

  Here's a message from my eventvwr EventLog (Windows Logs System): The previous system shutdown at 11:51:15 AM on ?7/?29/?2009 was unexpected. This is funny because I was wondering why the system shut down while I was playing Civilizations IV full screen. Now I know. It was unexpected. Has anyone encountered and resolved this? A little background: I am running Windows 7 RC inside VMWare Fusion 2 (just updated a few months back) on a MacBook (Bitterly not Pro) aluminum-body. Windows 7 occasionally will shut down. This isn't a quick turn-off, it's a shutdown where all the programs are exited, the system waits until they quit (and Civ4 doesn't prompt me to save), it even installed Windows Updates before restarting. And yes it is restarting right after the shutdown. Because I run a game in full screen mode I do not notice any dialog with a countdown timer or anything like that that might be a warning. As I have iStat on my dashboard widgets I can see about 8 temperature monitors. I have seen the CPU get up to 74C before, but during the shutdown, though it seemed hot to the touch (always is), it read 61C for the CPU, 60C for heatsink A, 50C for heatsink B and in the 30s-40s for the enclosure and harddrives. As I type this now, the temps are actually higher, so I don't think the temperature caused it. I have at least six such events dating first from 5/17 which was a week after installing Windows 7. I did find one information level warning from USER32 in the system log that says: The process C:\Windows\system32\svchost.exe (DLAMBLIN-WIN7) has initiated the restart of computer DLAMBLIN-WIN7 on behalf of user NT AUTHORITY\SYSTEM for the following reason: Operating System: Recovery (Planned) Reason Code: 0x80020002 Shutdown Type: restart Comment: And another 15 minutes before that from Windows Update: Restart Required: To complete the installation of the following updates, the computer will be restarted within 15 minutes: - Cumulative Security Update for Internet Explorer 8 for Windows 7 Release Candidate for x64-based Systems (KB972260) Which I think kind of explains it. Though I don't know why restarting after an update would create an error event of "shutdown was unexpected", isn't that pretty odd? Now, how do I set it to never restart after an update unless I click something. Application of solution: As fretje reminded me, there's a couple of configurable settings for this, in windows 7 they're much in the same place as in Windows 2000 SP3 and XP SP1. Running gpedit.msc pops up a window that looks like: Windows 7 has changed the order and added a couple of newer options I've italicized: Do not display 'Install Updates and Shut Down' in Shut Down Windows dialog box Do not adjust default option to 'Install Updates and Shut Down' in Shut Down Windows dialog box Enabling Windows Power Management to automatically wake up the system to install scheduled updates Configure Automatic Updates Specify intranet Microsoft update service location Automatic Updates detection frequency Allow non-administrators to receive update notifications Turn on Software Notifications Allow Automatic Updates immediate installation Turn on recommended updates via Automatic Updates No auto-restart with logged-on users for scheduled Automatic Updates Re-prompt for restart with scheduled installations. Delay Restart for scheduled installations Reschedule Automatic Updates schedule

  Read the article

• Favorite Midnight Commander tips & trick

  - by takeshin

  Please share your favorite mc tips here. My favorites: I just learned that Alt+. enables easily to toggle display of hidden files (on mc 4.7). Ctrl+\ - favorite dirs Alt+s - quick search BTW: how to use command line completion without switching to Ctrl+o mode? (TAB does not work, since it changes panels) how to insert full path of the current panel into the command line?

  Read the article

• How can I determine which taskbar application/windows are requesting user attention

  - by Frederic

  I'd like to know how to get a list of the windows requiring user attention from the Windows taskbar. Windows requiring attention appear with a flashing orange color within the Windows taskbar. Un-focused MSN Messenger conversation windows are a good example of this behavior: they turn orange as soon as a remote user sends an instance message. My code targets the Windows 7 platform, but working on older Windows OS would be nice too.

  Read the article

• ClearType setting ignored in Windows Virtual PC with Windows XP Pro

  - by Yadyn

  I have a VM set up through Windows Virtual PC for Windows XP Pro and I have been completely unable to get ClearType to work. I have turned it on in the Display - Appearance - Effects dialog but it seems like it completely ignores this. All text is still without any anti-aliasing. Even setting it to normal smoothing doesn't work. If I disable Integration Features, it seems to work, but then I lose a lot of nice features. What's weirder, is that the Windows XP Mode installed with Windows Virtual PC (this is separate from my XP Pro VM) works with both ClearType and Integration Features just fine. I turned it on the same way and it works like a charm, no problems. I'm running Windows 7 Professional 64-bit as the host OS and have the latest (to my knowledge) Windows Virtual PC installed. The only funny business I can think of is that I've enabled 24-bit color via the Group Policy setting inside each XP virtual machine (both Pro and the stripped down XP mode copy). This is a fairly well-known trick documented all over the web, but here's a typical post about it.

  Read the article

• Dual boot windows 8 pro and windows 7 on XPS 8500 Special Edition

  - by Jesse

  I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying "Where do you want to install windows at?" pops up but none of my drives are listed. Please help me determine what is going on. I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK." resolved above issue by running setup from the source folder on the install disk instead of booting from DVD. Was able to locate my new partition and start install. It completes the first step of "Copying windows files" just fine but then on the next step "Getting files ready for installation" my computer restarts and attempts to load windows 8 but keeps telling me my pc needs to restart. This keeps going on in an infinite boot loop. Please help, this has been a nightmare!

  Read the article

• Windows Live SkyDrive: How To Move or Copy Files Between Folders

  - by Gopinath

  Microsoft has very simple and easy to use interface to move files between folders in Windows Operating system. But their own cloud storage service,Windows Live SkyDrive, complicated these simple and daily used operations. We need a guide to figure out how to perform basic copy/move operations. Couple of years ago we wrote about moving files between folders in old version of SkyDrive but the guide does not hold good today as SkyDrive has gone through many user interface changes in the recent past. Today one of our readers asked us how to move/copy files in the latest version of SkyDrive and here are the steps to be followed 1. Login to your Windows Live SkyDrive 2. Select the file you want to Move or Copy by clicking on the information icon (see 2 in below image) 3. After selecting the information icon, expand Information section displayed on the right side panel to access Move and Copy options (see 3 in the below image). 4. To move the selected file to another folder, select Move option and Sky Drive will guide you through folder selection user interface for choosing the target folder. 5. Once you navigate to the target folder where you want to move the file click on “Move this file into <<Target Folder>>”. 6. You are done. Dear Microsoft, SkyDrive provides us tonnes of free storage but please make it’s user interface a bit better so that we don’t need to write guides to perform basic operations. Hope you listen to your customers. This article titled,Windows Live SkyDrive: How To Move or Copy Files Between Folders, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >