Search Results

Search found 11674 results on 467 pages for 'adding'.

Page 392/467 | < Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >

  • how to delete a line from file using awk filtered by some string

    - by embedded
    I have a file delimited by space. I need to write an awk command that receives a host name argument and it should replace the host name if it already defined in the file. It must be a full match not partially - if the file contains this host name: localhost searching for "ho" will fail and it will be added to the end of the file. another option is a delete: again awk receives host name argument and it should remove it from the file if exists. This is what I have so far: (It needs some enhancements) if [ "$DELETE_FLAG" == "" ]; then # In this case the entry should be added or updated # if clause deals with updating an existing entry # END clause deals with adding a new entry awk -F"[ ]" "BEGIN { found = 0;} \ { \ if ($2 == $HOST_NAME) { \ print \"$IP_ADDRESS $HOST_NAME\"; \ found = 1; \ } else { \ print \$0; \ } \ } \ END { \ if (found == 0) { \ print \"$IP_ADDRESS $HOST_NAME\"; } \ } " \ /etc/hosts > /etc/temp_hosts else # Delete an existing entry awk -F'[ ]' '{if($2 != $HOST_NAME) { print $0} }' /etc/hosts > /etc/temp_hosts fi Thanks

    Read the article

  • Why does Go not seem to recognize size_t in a C header file?

    - by Graeme Perrow
    I am trying to write a go library that will act as a front-end for a C library. If one of my C structures contains a size_t, I get compilation errors. AFAIK size_t is a built-in C type, so why wouldn't go recognize it? My header file looks like: typedef struct mystruct { char * buffer; size_t buffer_size; size_t * length; } mystruct; and the errors I'm getting are: gcc failed: In file included from <stdin>:5: mydll.h:4: error: expected specifier-qualifier-list before 'size_t' on input: typedef struct { char *p; int n; } _GoString_; _GoString_ GoString(char *p); char *CString(_GoString_); #include "mydll.h" I've even tried adding either of // typedef unsigned long size_t or // #define size_t unsigned long in the .go file before the // #include, and then I get "gcc produced no output". I have seen these questions, and looked over the example with no success.

    Read the article

  • Asynchronously get user data in facebook tab?

    - by Kristoffer Nolgren
    Using the php sdk, I check if a user inside a tab likes the corresponding page. If i put the following code inside index.php and use that page as my page-tab-url, <?php require_once("facebook/facebook.php"); // Create our application instance // (replace this with your appId and secret). $facebook = new Facebook(array( 'appId' => '1399475990283166', 'secret' => 'mysercret', 'cookie' => true )); $signed_request = $facebook->getSignedRequest(); echo $signed_request['page']['liked']; ?> it outputs '1'. I would like to achieve this asynchronously instead, so I put the php in a separate file and try to access it using ajax instead $http.post('/facebook/likes.php'). success(function(data){ console.log(data); }).error(function(data){ console.log(data); } ); This sample is using angular, but what javascript library i'm using probably doesn't matter. When I access the info with javascript Facebook doesn't seem to get the info that I liked the page. Adding a print_r($facebook); on the page I'm retreiving the same values as if i'm not in a facebook-tab: ( [sharedSessionID:protected] => [appId:protected] => 1399475990283166 [appSecret:protected] => 679fb0ab947c2b98e818f9240bc793da [user:protected] => [signedRequest:protected] => [state:protected] => [accessToken:protected] => [fileUploadSupport:protected] => [trustForwarded:protected] => ) Can I access theese values asynchronosly somehow?

    Read the article

  • Merging two arrays in PHP

    - by Industrial
    Hi everyone, I am trying to create a new array from two current arrays. Tried array_merge, but it will not give me what I want. $array1 is a list of keys that I pass to a function. $array2 holds the results from that function, but doesn't contain any non-available resuls for keys. So, I want to make sure that all requested keys comes out with 'null':ed values, as according to the shown $result array. It goes a little something like this: $array1 = array('item1', 'item2', 'item3', 'item4'); $array2 = array( 'item1' => 'value1', 'item2' => 'value2', 'item3' => 'value3' ); Here's the result I want: $result = array( 'item1' => 'value1', 'item2' => 'value2', 'item3' => 'value3', 'item4' => '' ); It can be done this way, but I don't think that it's a good solution - I really don't like to take the easy way out and suppress PHP errors by adding @:s in the code. This sample would obviously throw errors since 'item4' is not in $array2, based on the example. foreach ($keys as $k => $v){ @$array[$v] = $items[$v]; } So, what's the fastest (performance-wise) way to accomplish the same result?

    Read the article

  • Open new UserControl in the mainWindows

    - by user287964
    Hi I have this snippet public partial class Window1 : Window { public Window1() { InitializeComponent(); } private void ToggleButton_Checked(object sender, RoutedEventArgs e) { switch ((sender as Button).Content.ToString()) { case "UserControl 1": AddItemToContainer(new UserControl1()); break; case "UserControl 2": AddItemToContainer(new UserControl2()); break; case "UserControl 3": AddItemToContainer(new UserControl3()); break; default: break; } } void AddItemToContainer(UIElement _myElement) { Grid.SetColumn(_myElement, 1); HostContainer.Children.Add(_myElement); } } } } With this I can open a new userControl in myMainwindow Let’s say something like adding child to myMainWinodw,Now I’m trying to click on a button from my userControl so I open another userControl that take the place of the first one I explain: I have the mainWindows it has 3 button first one to open the first UserControl the second one to open the second userControl and the third to open the last UserControl,imagine that I opened the first UserControl let’s call it UC1, In the UC1 I have a button to open the second userControl (let’s call it UC2) I like that when I clik the button from the UC1 the UC2 is opened and take the place of the UC1 (of course the UC2 is still a child of myMainWinodw) I have alredy try to call the AddItemToContainer methode from other methode but nothing is happened Any suggestion please

    Read the article

  • Checkbox not checkable in dialog ui

    - by Sable Foste
    I am trying to solve a z-index problem with the jQuery UI Dialog, similar to question Can't select or deselect checkboxes inside jQuery UI Modal Dialog , knowing there is a bug report out there. So in trying to up the z-index as recommended, I added the following code: $('#interface').click(function(evform){ $('#interface').prop('z-index')=99999; }); where the chrome and firefox console.log states: Uncaught ReferenceError: Invalid left-hand side in assignment HOWEVER, despite the error, the checkbox now works (throwing the console error every time). If I remove the offending line, the checkbox becomes "unclickable". How can I properly code this? My HTML: <div id="dialog" title="Loading..."> <p id="interface">Loading...</p> </div> (by the way, I tried adding inline style to the <p>, and it didn't work: <p id="interface" style="z-index:99999">Loading...</p> And with AJAX, I replace the contents of '#interface' with valid checkbox html such as: <label for="right"> <input name="right" type="checkbox"> </label> and I have the usual jQuery/Dialog UI files included. One final note, I tried to get creative, since this wasn't working and manually switch the checkbox by: if ($(evform.target).prop('type')=="checkbox"){ $(evform.target).checked; } Thank you to anyone willing to help me figure this out!

    Read the article

  • How do you program a custom WordPress plug-in?

    - by James
    I have seen several WordPress plug-ins for adding a "quote of the day" feature (or something similar) to your blog. How do you create a customized one? I'm looking for something that will pull a daily entry from a list/database of my creation. I apologize if my question is not detailed enough. Still a newbie with WordPress. PART 2: Thanks for your prompt and on-point responses. With your responses and some additional research, I'm able to fine-tune my question. What I wish to accomplish is something similar to Amazon's Deal of the Day widget. Except, in my case, it will simply be a title and a corresponding link. My presumption is that I will set up a database and (using php or something similar) have the information drawn from the database and displayed in my WP sidebar. Additionally, I forgot to mention the time element. I want the displayed info to update once a day, at or around the same time each day. Any ideas? Thanks again. I'm so glad I found stackoverflow.

    Read the article

  • How to add an object to a html string?

    - by Philippe Maes
    I'm trying to load several images by a drop action and than resizing them and adding them as a thumbnail. The resize part is very important because the images can be very large and I want to make the thumbnails small of size. Here is my code: loadingGif(drop); for (var i=0;i<files.length;i++) { var file = files[i]; var reader = new FileReader(); reader.onload = function(e) { var src = e.target.result; var img = document.createElement('img'); img.src = src; var scale = 100/img.height; img.height = 100; img.width = scale*img.width; output.push('<div id="imagecontainer"><div id="image">'+img+'</div><div id="delimage"><img src="img/del.jpg"" /></div></div>'); if(output.length == files.length) { drop.removeChild(drop.lastChild); drop.innerHTML += output.join(''); output.length = 0; } } reader.readAsDataURL(file); } As you can probably tell I insert a loading gif image in my dropzone until all files are loaded (output.length == files.length). When a file is loaded I add html to an array which I will print if the load is complete. The problem is I can't seem to add the img object (I need this object to resize the image) to the html string, which seems obvious as the img is an object... So my question to you guys is: how do I do this? :)

    Read the article

  • Binding a TextBox's Width to its parent container's ActualWidth

    - by Praetorian
    Hi, I'm loading a Textbox and a Button into a horizontal StackPanel programmatically. The size of the button (which only contains an Image) is fixed, but I can't get the textbox to fill the available width of its parent. This is what the code looks like: StackPanel parent = new StackPanel() { Orientation = Orientation.Horizontal, HorizontalAlignment = HorizontalAlignment.Stretch, VerticalAlignment = VerticalAlignment.Top, }; TextBox textbox = new TextBox() { HorizontalAlignment = HorizontalAlignment.Stretch, VerticalAlignment = VerticalAlignment.Top, //MinWidth = 375, }; Button btn = new Button() { Content = new Image() { MaxHeight = 40, MaxWidth = 40, MinHeight = 40, MinWidth = 40, Margin = new Thickness( 0 ), Source = new BitmapImage( new Uri( "btnimage.png", UriKind.Relative ) ), }, HorizontalAlignment = HorizontalAlignment.Right, BorderBrush = new SolidColorBrush( Colors.Transparent ), Margin = new Thickness( 0 ), }; btn.Click += ( ( s, e ) => OnBtnClicked( s, e, textbox ) ); parent.Children.Add( textbox ); parent.Children.Add( btn ); If I uncomment the MinWidth setting for the textbox it is displayed as I want it to, but I'd like to not have to specify a width explicitly. I tried adding a binding as follows but that doesn't work at all (the textbox just disappears!) Binding widthBinding = new Binding() { Source = parent.ActualWidth, }; passwdBox.SetBinding( TextBox.WidthProperty, widthBinding ); Thanks for your help in advance!

    Read the article

  • How does an ASP.NET programmer go from working on/developing existing sites, to creating one from sc

    - by SLC
    I've been an ASP.NET developer for some time, always working on existing ASP.NET pages, modifying functionality, adding features, tweaking things etc. but have never built a site up from scratch. I've read books on ASP.NET, and they generally talk you through the various features of ASP.NET with a mock up site, but it's always very basic and they jump straight in. The time has come however, to write a site from scratch for a client. I've never done this before. There are design considerations, but like a lot of ASP.NET sites, the basic idea is, you have a site, where users can log in, and save some information like their name and password and address. The site has some functionality, but that's the basic design of a majority of (business-related) asp.net websites I would wager. I know how to program in ASP.NET already on an existing site, but I don't know how to design my own properly that meets the criteria above. I guess the main worry is security. I don't know the best way to handle a simple log-in system that stores user information like their name and password. I understand there are a few approaches to this, but the catch with this project is that it has to be absolutely bulletproof. Maximum security. All those good practices for security, it needs to have them all. I'm not asking what they are, but I am asking where to begin. What should be the first steps after I do File New Project ? Where can I look for information about setting up a secure ASP.NET website? I'll figure out the content and page layout later, it's the framework that is the big thing. Any and all advice would be welcome. I really want to get my first from-scratch project right from the beginning. Just to confuse things, it's possible I will be using MVC, I am not sure if this has any impact.

    Read the article

  • Using classes for the first time,help in debugging

    - by kaushik
    here is post my code:this is no the entire code but enough to explain my doubt.please discard any code line which u find irrelavent enter code here saving_tree={} isLeaf=False class tree: global saving_tree rootNode=None lispTree=None def __init__(self,x): file=x string=file.readlines() #print string self.lispTree=S_expression(string) self.rootNode=BinaryDecisionNode(0,'Root',self.lispTree) class BinaryDecisionNode: global saving_tree def __init__(self,ind,name,lispTree,parent=None): self.parent=parent nodes=lispTree.getNodes(ind) print nodes self.isLeaf=(nodes[0]==1) nodes=nodes[1]#Nodes are stored self.name=name self.children=[] if self.isLeaf: #Leaf Node print nodes #Set the leaf data self.attribute=nodes print "LeafNode is ",nodes else: #Set the question self.attribute=lispTree.getString(nodes[0]) self.attribute=self.attribute.split() print "Question: ",self.attribute,self.name tree={} tree={str(self.name):self.attribute} saving_tree=tree #Add the children for i in range(1,len(nodes)):#Since node 0 is a question # print "Adding child ",nodes[i]," who has ",len(nodes)-1," siblings" self.children.append(BinaryDecisionNode(nodes[i],self.name+str(i),lispTree,self)) print saving_tree i wanted to save some data in saving_tree{},which i have declared previously and want to use that saving tree in the another function outside the class.when i asked to print saving_tree it printing but,only for that instance.i want the saving_tree{} to have the data to store data of all instance and access it outside. when i asked for print saving_tree outside the class it prints empty{}.. please tell me the required modification to get my required output and use saving_tree{} outside the class..

    Read the article

  • Ordering the results of a Hibernate Criteria query by using information of the child entities of the

    - by pkainulainen
    I have got two entities Person and Book. Only one instance of a specific book is stored to the system (When a book is added, application checks if that book is already found before adding a new row to the database). Relevant source code of the entities is can be found below: @Entity @Table(name="persons") @SequenceGenerator(name="id_sequence", sequenceName="hibernate_sequence") public class Person extends BaseModel { @Id @Column(name = "id") @GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "id_sequence") private Long id = null; @ManyToMany(targetEntity=Book.class) @JoinTable(name="persons_books", joinColumns = @JoinColumn( name="person_id"), inverseJoinColumns = @JoinColumn( name="book_id")) private List<Book> ownedBooks = new ArrayList<Book>(); } @Entity @Table(name="books") @SequenceGenerator(name="id_sequence", sequenceName="hibernate_sequence") public class Book extends BaseModel { @Id @Column(name = "id") @GeneratedValue(strategy = GenerationType.SEQUENCE, generator = "id_sequence") private Long id = null; @Column(name="name") private String name = null; } My problem is that I want to find persons, which are owning some of the books owned by a specific persons. The returned list of persons should be ordered by using following logic: The person owning most of the same books should be at the first of the list, second person of the the list does not own as many books as the first person, but more than the third person. The code of the method performing this query is added below: @Override public List<Person> searchPersonsWithSimilarBooks(Long[] bookIds) { Criteria similarPersonCriteria = this.getSession().createCriteria(Person.class); similarPersonCriteria.add(Restrictions.in("ownedBooks.id", bookIds)); //How to set the ordering? similarPersonCriteria.addOrder(null); return similarPersonCriteria.list(); } My question is that can this be done by using Hibernate? And if so, how it can be done? I know I could implement a Comparator, but I would prefer using Hibernate to solve this problem.

    Read the article

  • Entity Framework Decorator Pattern

    - by Anthony Compton
    In my line of business we have Products. These products can be modified by a user by adding Modifications to them. Modifications can do things such as alter the price and alter properties of the Product. This, to me, seems to fit the Decorator pattern perfectly. Now, envision a database in which Products exist in one table and Modifications exist in another table and the database is hooked up to my app through the Entity Framework. How would I go about getting the Product objects and the Modification objects to implement the same interface so that I could use them interchangeably? For instance, the kind of things I would like to be able to do: Given a Modification object, call .GetNumThings(), which would then return the number of things in the original object, plus or minus the number of things added by the modification. This question may be stemming from a pretty serious lack of exposure to the nitty-gritty of EF (all of my experience so far has been pretty straight-forward LOB Silverlight apps), and if that's the case, please feel free to tell me to RTFM. Thanks in advance!

    Read the article

  • Subdomain Routing Rules (using chaining) Broke after upgrading to Zend Framework 1.9.5, but only for

    - by Dan
    I asked a similar question months ago (see How do I write Routing Chains for a Subdomain in Zend Framework in a routing INI file?), on how to write chaining rules in an app.ini format. The answer to this question worked wonderfully! Now, however, I have upgraded to the latest version of the Zend Framework 1.9.5 (I needed to upgrade for another issue) and now my subdomains no longer work! To clarify, if I visit subdomain.domain.com, it does not recognize my rule. However, if I visit subdomain.domain.com/somepage/ it does recognize my routing rule. Here is my code: ;; the following is apparently being ignored, and does not work routes.manager.type = "Zend_Controller_Router_Route_Hostname" routes.manager.route = "manager.sitename.com" routes.manager.defaults.module = "manager" ;; this is not being ignored and works! routes.manager.chains.settings.type = "Zend_Controller_Router_Route_Static" routes.manager.chains.settings.route = "/settings" routes.manager.chains.settings.defaults.controller = "manager" routes.manager.chains.settings.defaults.action = "settings" So for example, if I go to manager.sitename.com, it just redirects to my default index and controller (does not access the module, $this-getRequest()-getModuleName() is blank). However, if I go to manager.sitename.com/settings, the page comes up! This app.ini configuration works fine in ZF 1.7.8, But now since I upgraded to 1.9.5, it no longer works. I have tried adding routes.manager.defaults.controller = "manager" and routes.manager.defaults.action = 'index" to my configuration as well, but this didn't work. There is not much out there on the internet with chaining and app.ini dealing with Zend Framework. Any help on this issue would be greatly appreciated.

    Read the article

  • HTML columns or rows for form layout?

    - by Valera
    I'm building a bunch of forms that have labels and corresponding fields (input element or more complex elements). Labels go on the left, fields go on the right. Labels in a given form should all be a specific width so that the fields all line up vertically. There are two ways (maybe more?) of achieving this: Rows: Float each label and each field left. Put each label and field in a field-row div/container. Set label width to some specific number. With this approach labels on different forms will have different widths, because they'll depend on the width of the text in the longest label. Columns: Put all labels in one div/container that's floated left, put all fields in another floated left container with padding-left set. This way the labels and even the label container don't need to have their widths set, because the column layout and the padding-left will uniformly take care of vertically lining up all the fields. So approach #2 seems to be easier to implement (because the widths don't need to be set all the time), but I think it's also less object oriented, because a label and a field that goes with that label are not grouped together, as they are in approach #1. Also, if building forms dynamically, approach #2 doesn't work as well with functions like addRow(label, field), since it would have to know about the label and the field containers, instead of just creating/adding one field-row element. Which approach do you think is better? Is there another, better approach than these two?

    Read the article

  • java.lang.IllegalStateException: The content of the adapter has changed but ListView.... inspite of calling notifydatasetchanged()

    - by Mistaken
    What are the best practices to be followed to update the contents of a listactivty by a background thread (Async Task) ? 1) Am calling the notifyDataSetChanged() to update the adapter as soon as i manipulate the contents of the adapter but still my app force closes while the user scrolls or click on the list. Any pointers to prevent this would be very helpfull. Logcat: java.lang.IllegalStateException: The content of the adapter has changed but ListView did not receive a notification. 2) Where exaclty should i update contents of the listactivity ? inside the doInBackground() or onProgressUpdate()? 3) Am experiencing regular crashes when the user clicks the list item. So will disabling click events on the listactivty during the background operation solve the problem ? If so am not sure how to remove or set item click listeners dynamically to the listactivity. Please instruct me on the too. 4) I dont think blocking all ui interactions during the background async task execution is the only way to solve the problem. I know there is a simple way of doing this but need some help. Thanks in advance. This is my onCreate... protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.fa); tvStatus=(TextView) findViewById(R.id.tvStatus); adapter = new SimpleAdapter( this, mostPopularList, R.layout.list_item, new String[] {"title","author","views","date"}, new int[] {R.id.textView1,R.id.textView2,R.id.textView4,R.id.textView3}); //populateList(); setListAdapter(adapter); } My async task... private class LongOperation extends AsyncTask<String, Void, String> { @Override protected String doInBackground(String... params) { // code for adding new listactivty items } @Override protected void onPostExecute(String networkStatus) { adapter.notifyDataSetChanged(); } @Override protected void onPreExecute() { } @Override protected void onProgressUpdate(Void... values) { } }

    Read the article

  • Android: Calculator on showing 0 immediately after the dot

    - by pearmak
    I am now working on a calculator, and everything works fine except for decimal places. The calculator contains 2 displays actually, one is called fakedisplay for actual operations, and one is called Display, for presenting the desired format, ie adding commas. When pressing 12345.678, Display will follow fakedisplay and present as 12,345.678, but if i press 12345.009, the fakedisplay will work normally as 12345.009, but the Display stuck as 12,345 until 9 is pressed, and at that time it will show 12,345.009 normally. However, it is strange that when the user presses 0, there is no response, and until pressing 9, 009 will then immediately append. I know this arise from the parsing code, but based on this, how could I amend the following code? I really cannot think of any solution... Many thanks for all your advice! one.setOnClickListener(new View.OnClickListener() { if (str.length()<15) {Fakedisplay.append("1");} DecimalFormat myFormatter1 = new DecimalFormat("###,###,###,###.#################"); String str1=Fakedisplay.getText().toString(); String stripped1 = Double.valueOf(str1).toString(); stripped1 = myFormatter1.format(Double.valueOf(stripped1)); if (stripped1.endsWith(".0")) stripped1 = stripped1.substring(0, stripped1.length() - 2); Display.setText(stripped1);

    Read the article

  • How can I make this jQuery plugin chainable after all image load events have completed?

    - by BumbleB2na
    [UPDATE] Solution I decided on: Decided that passing in a callback to the plugin will take care of firing an event once all images have completed loading. Chaining is also still possible. Updated Fiddle I am building a chainable jQuery plugin that can load images dynamically. (View the following code as a JSFiddle) Html: <img data-img-src="http://www.lubasf.com/blog/wp-content/uploads/2009/03/gnome.jpg" style="display: none" /> <img data-img-src="http://buffered.io/uploads/2008/10/gnome.jpg" style="display: none" /> Instead of adding in a src attribute, I give these images a data-img-src attribute. My plugin uses the value of that to fill the src. Also, these images are hidden to begin with. jQuery plugin: (function(jQuery) { jQuery.fn.loadImages = function() { var numToLoad = jQuery(this).length; var numLoaded = 0; jQuery(this).each(function() { if(jQuery(this).attr('src') == undefined) { return jQuery(this).load(function() { numLoaded++; if(numToLoad == numLoaded) return this; // attempt at making this plugin // chainable, after all .load() // events have completed. }).attr('src', jQuery(this).attr('data-img-src')); } else { numLoaded++; if(numToLoad == numLoaded) return this; // attempt at making this plugin // chainable, after all .load() // events have completed. } }); // this works if uncommented, but returns before all .load() events have completed //return this; }; })(jQuery); // I want to chain a .fadeIn() after all images have completed loading $('img[data-img-src]').loadImages().fadeIn(); Is there a way to make this plugin chainable, and have my fadeIn() happen after all images have loaded?

    Read the article

  • C++ Type error with Object versus Object reference

    - by muddybruin
    I have the following function (which worked in Visual Studio): bool Plane::contains(Vector& point){ return normalVector.dotProduct(point - position) < -doubleResolution; } When I compile it using g++ version 4.1.2 , I get the following error: Plane.cpp: In member function âvirtual bool Plane::contains(Vector&)â: Plane.cpp:36: error: no matching function for call to âVector::dotProduct(Vector)â Vector.h:19: note: candidates are: double Vector::dotProduct(Vector&) So as you can see, the compiler thinks (point-position) is a Vector but it's expecting Vector&. What's the best way to fix this? I verified that this works: Vector temp = point-position; return normalVector.dotProduct(temp) < -doubleResolution; But I was hoping for something a little bit cleaner. I heard a suggestion that adding a copy constructor might help. So I added a copy constructor to Vector (see below), but it didn't help. Vector.h: Vector(const Vector& other); Vector.cpp: Vector::Vector(const Vector& other) :x(other.x), y(other.y), z(other.z), homogenous(other.homogenous) { }

    Read the article

  • Looping through a method without for/foreach/while

    - by RichK
    Is there a way of calling a method/lines of code multiple times not using a for/foreach/while loop? For example, if I were to use to for loop: int numberOfIterations = 6; for(int i = 0; i < numberOfIterations; i++) { DoSomething(); SomeProperty = true; } The lines of code I'm calling don't use 'i' and in my opinion the whole loop declaration hides what I'm trying to do. This is the same for a foreach. I was wondering if there's a looping statement I can use that looks something like: do(6) { DoSomething(); SomeProperty = true; } It's really clear that I just want to execute that code 6 times and there's no noise involving index instantiating and adding 1 to some arbitrary variable. As a learning exercise I have written a static class and method: Do.Multiple(int iterations, Action action) Which works but scores very highly on the pretentious scale and I'm sure my peers wouldn't approve. I'm probably just being picky and a for loop is certainly the most recognisable, but as a learning point I was just wondering if there (cleaner) alternatives. Thanks. (I've had a look at this thread, but it's not quite the same) http://stackoverflow.com/questions/2248985/using-ienumerable-without-foreach-loop

    Read the article

  • MVC route doesn't work

    - by bill
    Hi All, I have a bunch of Views in a default folder that represent single "static" pages. Everything works as advertised except i tried adding a new page yesterday.. using the exact same routing syntax and cannot for the life of me get it to work. here's is an example of a working route: routes.MapRoute( "OurProgram", // Route name "Our_Program", // URL with parameters new { controller = "Default", action = "OurProgram" } ); The filename is OurProgram and hitting http:// localhost/Our_Program/ opens the correct view which resides in the Views/Default folder. So i added another view into this folder: Views/Default/BuyNow.aspx and added the route: routes.MapRoute( "BuyNow", // Route name "Buy_Now", // URL with parameters new { controller = "Default", action = "BuyNow" } ); And this doesn't open. I have tried the "route debugger http://haacked.com/archive/2008/03/13/url-routing-debugger.aspx" and it correctly identifies the route. I am at a lose. I have tried re-creating the view.. I am using MVC.Net 2.0 and VS 10. Any help is appreciated!

    Read the article

  • List all foreign key constraints that refer to a particular column in a specific table

    - by Sid
    I would like to see a list of all the tables and columns that refer (either directly or indirectly) a specific column in the 'main' table via a foreign key constraint that has the ON DELETE=CASCADE setting missing. The tricky part is that there would be an indirect relationships buried across up to 5 levels deep. (example: ... great-grandchild- FK3 = grandchild = FK2 = child = FK1 = main table). We need to dig up the leaf tables-columns, not just the very 1st level. The 'good' part about this is that execution speed isn't of concern, it'll be run on a backup copy of the production db to fix any relational issues for the future. I did SELECT * FROM sys.foreign_keys but that gives me the name of the constraint - not the names of the child-parent tables and the columns in the relationship (the juicy bits). Plus the previous designer used short, non-descriptive/random names for the FK constraints, unlike our practice below The way we're adding constraints into SQL Server: ALTER TABLE [dbo].[UserEmailPrefs] WITH CHECK ADD CONSTRAINT [FK_UserEmailPrefs_UserMasterTable_UserId] FOREIGN KEY([UserId]) REFERENCES [dbo].[UserMasterTable] ([UserId]) ON DELETE CASCADE GO ALTER TABLE [dbo].[UserEmailPrefs] CHECK CONSTRAINT [FK_UserEmailPrefs_UserMasterTable_UserId] GO The comments in this SO question inpire this question.

    Read the article

  • I have a slight confusion with setting up Mercurial on my webserver...

    - by littlejim84
    I'm starting to use Mercurial on my web server (in this case MediaTemple's Grid). I've used SVN previously, though I'm not an expert of version control systems. I'm just needing a little help with clearing up some confusion with getting it set up optimally. I have a 'data' folder which is outside the web server root and that the browser cannot access. It was recommended to me before to have my Mercurial repositories setup here, then I would clone from here locally on my computer. I would also have a 'domains' folder that is basically the web server root and inside there is my actual domains where my websites are actually served to the browser - these would need to be updated from the 'data' repositories too. But with this in mind, after setting it up, it seems inefficient... I'm cloning to my local (that makes sense), adding, committing, pushing. That's fine... But then I'm then updating in my data repository folder and then updating in my domains folder to actually update my websites. Surely, I don't actually need this 'data' folder for repositories? Wouldn't my actual live 'domains' folders be the main repositories themselves? So I'm cloning locally and updating from these? Please help me clear some confusions with all this (if you can).

    Read the article

  • Does implementing a Java class under an open-source library's package name constitutes a modificatio

    - by Minyu
    Greetings, I understand that this is not the best forum for getting legal advices. But I am still wondering if anybody has some experience around this topic, or can point me to relevant resources that explain it. I have tried to search it online but could not find clear answers. Assuming I am using a Java open-source library from "somecompany", specifically its entities in the "org.somecompany.somepackage". During development, I found that I need to access some of the internals of that package that are not exposed through its public interface. So I thought maybe creating my own classes under the same "org.somecompany.somepackage" name would make that easier. My question is: does this constitutes a modification of the open-source library? The fully qualified name of my classes look like "org.somecompany.somepackage.myclass". It does seem an "extension" of the original library, even though I am not modifying the original library source or binary. I am also not adding my classes to the open-source jar files. Any advice or pointer to resources will be appreciated!

    Read the article

  • Excel, Pivot Calculated formula: SUM(Field1)/AVG(Field2)

    - by Bas
    I've a simple table with some amount and interval in sec by date and product name. Month | Product | Amount | Interval in sec ------------------------------------------ 05-'12| Prod A | 10 | 5 05-'12| Prod A | 3 | 5 05-'12| Prod B | 4 | 5 05-'12| Prod C | 13 | 5 05-'12| Prod C | 5 | 5 From this table I've derived a Pivot table with SUM(Amount), AVERAGE(Interval in sec) by Month and Product. Month | Product | SUM of Amount | AVG of Interval in sec -------------------------------------------------------- 05-'12| Prod A | 13 | 5 05-'12| Prod B | 4 | 5 05-'12| Prod C | 18 | 5 So far So good... Now i want to add and extra column to my Pivot table with gives me the outcome of SUM of Amount / AVG of Interval in sec Adding a calculated value =SUM(Amount)/AVERAGE(Interval) is not giving me the right values. Exel gives me. Month | Product | SUM of Amount | AVG of Interval in sec | Amount per sec ------------------------------------------------------------------------- 05-'12| Prod A | 13 | 5 | 1.3 05-'12| Prod B | 4 | 5 | 0.8 05-'12| Prod C | 18 | 5 | 1.8 What it actually is doing is =SUM(Amount)/SUM(Interval in sec) for every Month and Product based on the values in the first table... But I'm looking for Month | Product | SUM of Amount | AVG of Interval in sec | Amount per sec ------------------------------------------------------------------------- 05-'12| Prod A | 13 | 5 | 2.6 05-'12| Prod B | 4 | 5 | 0.8 05-'12| Prod C | 18 | 5 | 3.6 So litterly devide pivot field 'Sum of Amount' by pivot field 'AVG of Interval in sec' How to achieve this? Thank you in advanced

    Read the article

< Previous Page | 388 389 390 391 392 393 394 395 396 397 398 399  | Next Page >