Search Results

Search found 57263 results on 2291 pages for 'grails domain class'.

Page 395/2291 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

  • Apache2 Doesn't Serve Subdomain Alias

    - by Cyle Hunter
    I'm trying to prefix an existing Rails application with a sub-domain, essentially I want the sub-domain to serve the same application. Right now apache2 serves my application with "www.example.com" or "example.com". I adjusted my sites-available virtualhost in hopes of allowing for "foo.example.com" or "www.foo.example.com" however both instances are met with a domain not found error. Here is my current VirtualHost in /etc/apache2/sites-available/example.com: <VirtualHost *:80> ServerName example.com ServerAlias foo.example.com *.example.com www.foo.example.com www.example.com DocumentRoot /home/user/my_app/public <Directory /home/user/my_app/public> AllowOverride all Options -MultiViews </Directory> </VirtualHost> Any ideas? Note, I realized I probably don't need a wild card sub-domain for what I'm trying to do, I simply added that in as a last-ditch effort. Edit: The actual domain is virtualrobotgames.com with the desired subdomain being roboteer.virtualrobotgames.com

    Read the article

  • rewrite rule does not rewrite url as expected

    - by user1708687
    I have a problem with a CMS website, that normally generates readable urls. Sometimes it happens that navigation links are shown as www.domain.com/22, which results in an error, instead of www.domain.com/contact. I have not found a solution for this yet, but the page is working if the url is www.domain.com/index.php?id=22. Therefore, I'm trying to rewrite www.domain.com/22 to www.domain.com/index.php?id=22 and I have used this rewrite rule: RewriteRule ^([1-9][0-9]*)$ index.php?id=$1 [NC] I tested it using http://htaccess.madewithlove.be and here it shows the correct result, but on the website no rewrite is happening.

    Read the article

  • Silverlight TV 18: WCF RIA Services Validation

    Just prior to MIX10, Nikhil Kothari appears on the show to demonstrate some of the key advantages around validation when using WCF RIA Services. He demonstrates how to use a Domain Service to expose your domain model and how to create a custom service method to further filter your data server side. Nikhil also shows how the Domain Services generates validation rules using the database attributes such as required fields or maximum string lengths. Other topics Nikhil covers: Domain service generated...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • $HTTP_HOST multiple rewrite

    - by nrivoli
    I have Apache 2.2, Ubuntu 12. I want to load a different envionment based on my HTTP_HOST, this works for the first domain only, after that I get error 500, " Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace." and I am not able to see my error... RewriteEngine on RewriteBase / RewriteCond %{HTTPS} off RewriteRule ^ - [F] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{HTTP_HOST} ^server-dev.domain.tld$ [NC] RewriteRule ^(.*)$ /api/dev.php/$1 [L] RewriteCond %{HTTP_HOST} ^server-qa.domain.tld$ [NC] RewriteRule ^(.*)$ /api/qa.php/$1 [L] #RewriteCond %{HTTP_HOST} ^localhost$ [NC] #RewriteRule ^(.*)$ /api/localhost.php/$1 [L] I am accesing to https://server-dev.domain.tl/api/whatever https://server-qa.domain.tl/api/whatever

    Read the article

  • DNS question and Google PageRank from domains

    - by Beck
    I'm not so good at dns at all :) Just basics. A while ago i have noticed, that my blog have different Page Ranks, PR 3 for domain www.example.com and PR 1 for domain example.com. In dns records i have this setup: A - IP - www.example.com A - same IP - example.com Should i replace this record "A - same IP - example.com" with row with CNAME instead of A? Like that: CNAME - same IP - example.com - alias www.example.com Will this combine Page Rank value of both domains? Or i can just create 302 redirection inside .htaccess file, verify example.com(without www) inside Google Webmaster Tools as my domain and inside www.example.com options set as main domain? Thanks ;)

    Read the article

  • Tracking multiple subdomains and domains going to the same site, separately in Google Analytics

    - by miles
    I have a new site that has multiple top-level domains and subdomains all going to it: www.domain.com, campaign.domain.com, chicago.domain.com, domain2.com - all go to the same site/site directory. Right now I have one Google Analytics account profile set up for it, but I want to be able to track the traffic that is hitting those different URLs separately. The domains are being routed on the server-side (not .htaccess). How can I do this in Google Analytics? Do I need to create filters? Or create different profiles for each domain?

    Read the article

  • What is the simplest possible configuration of Apache2 mod_proxy?

    - by Eye of Hell
    Hello. I have an apache2 running and i have a service available as http://www.domain.com:8080/sitename What will be a simplest apache2 configuration so entering "http://www.domain.com" in browser will show "http://www.domain.com:8080/sitename"? I have added: <VirtualHost *:80> ProxyPass / http://www.domain.com:8080/sitename/ ProxyPassReverse / http://www.domain.com:8080/sitename/ </VirtualHost> But, of course, this is not workig. Is it some simple configuration i can use for such redirect or i'm doomed to copy-paste a 100+ line configs from tutorials?

    Read the article

  • DNS MX and NS entries

    - by unkown
    I was wondering about my domain and if next is afordable. First of all this is my "architecture": Domain registration at GoDaddy.com Hosting at Dreamhost mail at google apps Until now I setted up the google apps MX entries in my domain through the GoDaddy manager, but now what I want is to set up the hosting I have hired from Dreamhost. I understand that all I have to do is to setup next Dreamhost NS entries into the GoDaddy domain manager: NS1.Dreamhost.COM. 66.33.206.206 NS2.Dreamhost.COM. 208.96.10.221 NS3.Dreamhost.COM. 66.33.216.216 My question is, will my mail keep working right as soon as the MX entries I already setup into the GoDaddy are the Google Apps ones?

    Read the article

  • fsockopen() error : Network is unreachable port 43 in php [closed]

    - by hamid
    i've writed some Php code that lookup for domain (whois) but it fails !! this is some of my code : function checkdomain($server,$domain){ global $response; $connection = fsockopen($server,43); fputs($connection, "domain " . $domain . "\r\n"); while(!feof($connection)){ $response .= fgets($connection, 4096); } fclose($connection); } checkdomain("whois.crsnic.net","www.example.com"); the code work on my localhost ( apache,php,mysql, OS - Win XP ) but when i uploaded it to my host (Linux) it failed. and i always see the Below Error/message : Warning: fsockopen() [function.fsockopen]: unable to connect to whois.crsnic.net:43 (Network is unreachable) in /home/hamid0011/public_html/whois/whois.php on line 37 what should i do ? is this my host's problem or whois server ( but it work in localhost ) or my code ? TNX

    Read the article

  • Design for a plugin based application

    - by Varun Naik
    I am working on application, details of which I cannot discuss here. We have core framework and the rest is designed as plug in. In the core framework we have a domain object. This domain object is updated by the plugins. I have defined an interface in which I have function as DomainObject doProcessing(DomainObject object) My intention here is I pass the domain object, the plug in will update it and return it. This updated object is then passed again to different plugin to be updated. I am not sure if this is a good approach. I don't like passing the DomainObject to plugin. Is there a better way I can achieve this? Should I just request data from plugin and update the domain object myself?

    Read the article

  • Tic Tac Toe Winner in Javascript and html [closed]

    - by Yehuda G
    I am writing a tic tac toe game using html, css, and JavaScript. I have my JavaScript in an external .js file being referenced into the .html file. Within the .js file, I have a function called playerMove, which allows the player to make his/her move and switches between player 'x' and 'o'. What I am trying to do is determine the winner. Here is what I have: each square, when onclick(this), references playerMove(piece). After each move is made, I want to run an if statement to check for the winner, but am unsure if the parameters would include a reference to 'piece' or a,b, and c. Any suggestions would be greatly appreciated. Javascript: var turn = 0; a = document.getElementById("topLeftSquare").innerHTML; b = document.getElementById("topMiddleSquare").innerHTML; c = document.getElementById("topRightSquare").innerHTML; function playerMove(piece) { var win; if(piece.innerHTML != 'X' && piece.innerHTML != 'O'){ if(turn % 2 == 0){ document.getElementById('playerDisplay').innerHTML= "X Plays " + printEquation(1); piece.innerHTML = 'X'; window.setInterval("X", 10000) piece.style.color = "red"; if(piece.innerHTML == 'X') window.alert("X WINS!"); } else { document.getElementById('playerDisplay').innerHTML= "O Plays " + printEquation(1); piece.innerHTML = 'O'; piece.style.color = "brown"; } turn+=1; } html: <div id="board"> <div class="topLeftSquare" onclick="playerMove(this)"> </div> <div class="topMiddleSquare" onclick="playerMove(this)"> </div> <div class="topRightSquare" onclick="playerMove(this)"> </div> <div class="middleLeftSquare" onclick="playerMove(this)"> </div> <div class="middleSquare" onclick="playerMove(this)"> </div> <div class="middleRightSquare" onclick="playerMove(this)"> </div> <div class="bottomLeftSquare" onclick="playerMove(this)"> </div> <div class="bottomMiddleSquare" onclick="playerMove(this)"> </div> <div class="bottomRightSquare" onclick="playerMove(this)"> </div> </div>

    Read the article

  • .htaccess RewriteRule Problem

    - by Kunal Gautam
    Before asking question let me tell you some assumptions here there are 5 files on my webserver index.php config.php read.php write.php .htaccess I've wrote following URL rewriting rule in .htaccess RewriteEngine on RewriteRule ^(\w+)$ read.php?id=$1 Now when I type domain.com/xyz it fetch data from read.php?id=xyz thats nice :) But when I type domain.com/index it fetch data from index.php or when i type domain.com/write or domain.com/config or domain.com/read it fetch data from write.php , config.php and read.php respectively I want data to be fectched from read.php?id=index or read.php?id=config or read.php?id=read or read.php?id=write Any one can help me regarding this ? Sorry for my poor english

    Read the article

  • BizTalk 2009 - Creating a Custom Functoid Library

    - by StuartBrierley
    If you find that you have a need to created multiple Custom Functoids you may also choose to create a Custom Functoid Library - a single project containing many custom functoids.  As previsouly discussed, the Custom Functoid Wizard can be used to create a project with a new custom functoid inside.  But what if you want to extend this project to include more custom functoids and create your Custom Functoid Library?  First create a Custom Functoid Library project and your first Custom Functoid using the Custom Functoid Wizard. When you open your Custom Functoid Library project in Visual Studio you will see that it contains your custom functoid class file along with its resource file.  One of the items this resource file contains is the ID of the the custom functoid.  Each custom functoid needs a unique ID that is over 6000.  When creating a Custom Functoid Library I would first suggest that you delete the ID from this resource file and instead create a _FunctoidIDs class containing constants for each of your custom functoids.  In this way you can easily see which custom functoid IDs are assigned to which custom functoid and which ID is next in the sequence of availability: namespace MyCompany.BizTalk.Functoids.TestFunctoids {     class _FunctoidIDs     {         public const int TestFunctoid                       = 6001;     } } You will then need to update the base() function in your existing functoid class to reference these constant values rather than the current resource file. From:    int functoidID;    // This has to be a number greater than 6000    functoidID = System.Convert.ToInt32(resmgr.GetString("FunctoidId"));    this.ID = functoidID; To: this.ID = _FunctoidIDs.TestFunctoid; To create a new custom functoid you can copy the existing custom functoid, renaming the resultant class file as appropriate.  Once it is renamed you will need to change the Class name, ResourceName reference and Base function name in the class code to those of your new custom functoid.  You will also need to create a new constant value in the _FunctoidIDs class and update the ID reference in your code to match this.  Assuming that you need some different functionalty from your new  customfunctoid you will need to check or amend the following in your functoid class file: Min and Max connections Functoid Category Input and Output connection types The parameters and functionality of the Execute function To change the appearance of you new custom functoid you will need to check or amend the following in the functoid resource file: Name Description Tooltip Exception Icon You can change the String values by double clicking the resource file and amending the value fields in the string table. To amend the functoid icon you will need to create a 16x16 bitmap image.  Once you have saved this you are then ready to import it into the functoid resource file.  In Visual Studio change the resource view to images, right click the icon and choose import from file. You have now completed your new custom functoid and created a Custom Functoid Library.  You can test your new library of functoids by building the project, copying the resultant DLL to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions and then resetting the toolbox in Visual Studio.

    Read the article

  • Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

    - by Bowsa
    I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to GPO objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated!

    Read the article

  • Specify Credentials to run Powershell Script to Query AD

    - by Ben
    I want to run a powershell script to query AD from a machine that is NOT on the domain. Basically I want to query to see if there is computer account already on the domain for this machine and create it if there is not. Because this has to happen before the machine joins the domain I assume I will need to specify some credentials to enable it to run. (I'm pretty new to Powershell, so apologies if this is a newbie question!) The script I am using to check the account is below, and then once this has run it will join the domain using the computername specified. Can you tell me how to specify some domain credentials to run this section of the script as? Cheers, Ben $found=$false $thisComputer = <SERVICE TAG FROM BIOS> $ou = [ADSI]"LDAP://OU=My Computer OU,DC=myDomain,DC=com" foreach ($child in $ou.psbase.Children ) { if ($child.ObjectCategory -like '*computer*') { If ($child.Name -eq $thisComputer) { $found=$true } } } If ($found) { <DELETE THE EXISTING ACCOUNT> }

    Read the article

  • How do I connect to my running VM via virsh?

    - by Avery Chan
    My VM has already been started via virsh start chameleon.ootbdev. When I do a virsh console chameleon.ootbdev I get the following output: Connected to domain chameleon.ootbdev Escape character is ^] error: internal error cannot find character device (null) Doing a google search on this led me to this "solution". Unfortunately, editing the domain via virsh edit chameleon.ootbdev doesn't seem to stick. I suspect the issue is that I'm inserting the XML incorrectly: the instructions from the link ask me to insert the following XML into the domain XML file. <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> I've posted my domain XML file to pastebin here. This is AFTER I've tried to insert the above XML. I inserted this XML after the </devices> block. My primary question is: How do I connect to the running VM? A secondary question would be: How do I edit the domain file with the above XML and get the changes to stick?

    Read the article

  • RDA Health Checks for SOA

    - by ShawnBailey
    What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

    Read the article

  • nginx dynamic servername with regular expression doesn't work for co.uk

    - by redn0x
    I'm trying to setup a nginx server which dynamically loads content from a folder for a domain. To do this I'm using regular expressions in the server name like so: server_name ((?<subdomain>.+)\.)?(?<domain>.+)\.(?<tld>.*); This will create a 3 variables for nginx to use later on, for example when using the following url: test.foo.example.com this will evaluate to: $subdomain = test.foo $domain = example $tld = com The problem arises when the co.uk top-level domain is used. In this case when using the url test.foo.example.co.ukit will evaluate to: $subdomain = test.foo.cedira $domain = co $tld = uk How can I edit the regular expression so that it will also work for co.uk?

    Read the article

  • Recovery from URL structure change?

    - by Dejan Pelzel
    in July this year, we have changed the URL structure of the website from: Post: domain.com/blog/post/986/dance/heart-beats-dance-video-by-chinatsu/ Category: domain.com/blog/index/cosplay/ to Post: domain.com/dance/heart-beats-dance-video-by-chinatsu-986/ Category: domain.com/cosplay/ Everything was (supposedly) properly redirected with 301 redirects and it first seemed that the traffic returned after a couple of days, but it has now been close to 2 months and things keep going worse although Google is slowly indexing the changes. What is worrying me even more is that the Pages crawled per day from Webmaster Tools started drastically dropping a few days ago and has just reached a new low in months (from over 2000 to 700). Should I be worried or will things sort out eventually?

    Read the article

  • Star rating not showing in rich snippets

    - by Danny R
    We've recently been doing a lot of work on our site's SEO (www.betterthanreviews.com). We recently did a push to update the rich snippets breadcrumb, meta description, and star rating. After giving Google some time to index the site, it has updated the breadcrumbs and meta descriptions for our review pages, but the stars are still not showing. This is currently how it appears on a Google search (link to the actual page: http://www.betterthanreviews.com/home-security/livewatch): This is what the Rich Snippets is supposed to look like, and how it appears in Google's testing tool: More context: As seen in our html, we are using schema.org language. We initially were using schema.org/Corporation for the site, but we now have the page labeled as schema.org/HomeAndConstructionBusiness because Google will not show star ratings for the Corporation language. However, in our Webmaster Tools, the Structured Data is still showing the Corporation language, which could be a potential issue. Here is a look at some of the coding that we used. But it can be looked at closer by inspecting the element: <div class="aggregate-rating" itemprop="aggregateRating" itemscope="" itemtype="http://schema.org/AggregateRating"> <div class="review row_fluid" itemprop="review" itemscope="" itemtype="http://schema.org/Review"> <div class="row_fluid rating" itemprop="reviewRating" itemscope="" itemtype="http://schema.org/Rating"> <meta content="4.5" itemprop="ratingValue" title="4.5 out of 5 stars" class="star-rating-readonly"> <meta content="2013-12-05" itemprop="datePublished"> <p class="review-headline" itemprop="headline">Way better than my previous system</p> <div> <p class="reviewer" itemprop="author">Scott H. </p> <span class="bullet">•</span> <p class="created_at">2 months ago</p> <p class="content" itemprop="description">I love it! The experience I have had so far is extremely positive. I had another alarm system before and I didn't like it but this one is really nice. I am telling everybody about it.</p> </div> </div> Any suggestions for how to fix this?

    Read the article

  • Availability Best Practices on Oracle VM Server for SPARC

    - by jsavit
    This is the first of a series of blog posts on configuring Oracle VM Server for SPARC (also called Logical Domains) for availability. This series will show how to how to plan for availability, improve serviceability, avoid single points of failure, and provide resiliency against hardware and software failures. Availability is a broad topic that has filled entire books, so these posts will focus on aspects specifically related to Oracle VM Server for SPARC. The goal is to improve Reliability, Availability and Serviceability (RAS): An article defining RAS can be found here. Oracle VM Server for SPARC Principles for Availability Let's state some guiding principles for availability that apply to Oracle VM Server for SPARC: Avoid Single Points Of Failure (SPOFs). Systems should be configured so a component failure does not result in a loss of application service. The general method to avoid SPOFs is to provide redundancy so service can continue without interruption if a component fails. For a critical application there may be multiple levels of redundancy so multiple failures can be tolerated. Oracle VM Server for SPARC makes it possible to configure systems that avoid SPOFs. Configure for availability at a level of resource and effort consistent with business needs. Effort and resource should be consistent with business requirements. Production has different availability requirements than test/development, so it's worth expending resources to provide higher availability. Even within the category of production there may be different levels of criticality, outage tolerances, recovery and repair time requirements. Keep in mind that a simple design may be more understandable and effective than a complex design that attempts to "do everything". Design for availability at the appropriate tier or level of the platform stack. Availability can be provided in the application, in the database, or in the virtualization, hardware and network layers they depend on - or using a combination of all of them. It may not be necessary to engineer resilient virtualization for stateless web applications applications where availability is provided by a network load balancer, or for enterprise applications like Oracle Real Application Clusters (RAC) and WebLogic that provide their own resiliency. It's (often) the same architecture whether virtual or not: For example, providing resiliency against a lost device path or failing disk media is done for the same reasons and may use the same design whether in a domain or not. It's (often) the same technique whether using domains or not: Many configuration steps are the same. For example, configuring IPMP or creating a redundant ZFS pool is pretty much the same within the guest whether you're in a guest domain or not. There are configuration steps and choices for provisioning the guest with the virtual network and disk devices, which we will discuss. Sometimes it is different using domains: There are new resources to configure. Most notable is the use of alternate service domains, which provides resiliency in case of a domain failure, and also permits improved serviceability via "rolling upgrades". This is an important differentiator between Oracle VM Server for SPARC and traditional virtual machine environments where all virtual I/O is provided by a monolithic infrastructure that itself is a SPOF. Alternate service domains are widely used to provide resiliency in production logical domains environments. Some things are done via logical domains commands, and some are done in the guest: For example, with Oracle VM Server for SPARC we provide multiple network connections to the guest, and then configure network resiliency in the guest via IP Multi Pathing (IPMP) - essentially the same as for non-virtual systems. On the other hand, we configure virtual disk availability in the virtualization layer, and the guest sees an already-resilient disk without being aware of the details. These blogs will discuss configuration details like this. Live migration is not "high availability" in the sense of "continuous availability": If the server is down, then you don't live migrate from it! (A cluster or VM restart elsewhere would be used). However, live migration can be part of the RAS (Reliability, Availability, Serviceability) picture by improving Serviceability - you can move running domains off of a box before planned service or maintenance. The blog Best Practices - Live Migration on Oracle VM Server for SPARC discusses this. Topics Here are some of the topics that will be covered: Network availability using IP Multipathing and aggregates Disk path availability using virtual disks defined with multipath groups ("mpgroup") Disk media resiliency configuring for redundant disks that can tolerate media loss Multiple service domains - this is probably the most significant item and the one most specific to Oracle VM Server for SPARC. It is very widely deployed in production environments as the means to provide network and disk availability, but it can be confusing. Subsequent articles will describe why and how to configure multiple service domains. Note, for the sake of precision: an I/O domain is any domain that has a physical I/O resource (such as a PCIe bus root complex). A service domain is a domain providing virtual device services to other domains; it is almost always an I/O domain too (so it can have something to serve). Resources Here are some important links; we'll be drawing on their content in the next several articles: Oracle VM Server for SPARC Documentation Maximizing Application Reliability and Availability with SPARC T5 Servers whitepaper by Gary Combs Maximizing Application Reliability and Availability with the SPARC M5-32 Server whitepaper by Gary Combs Summary Oracle VM Server for SPARC offers features that can be used to provide highly-available environments. This and the following blog entries will describe how to plan and deploy them.

    Read the article

  • Postfix tutorial inconsistency

    - by Desmond Hume
    I'm following this tutorial to setup a Postfix/Dovecot mail server with Postfix Admin as a web front end. As regards directory structure for virtual mail users, the author of the tutorial writes: Virtual mail users are those that do not exist as Unix system users. They thus don't use the standard Unix methods of authentication or mail delivery and don't have home directories. That is how we are managing things here: mail users are defined in the database created by Postfix Admin rather than existing as system users. Mail will be kept in subfolders per domain and account under /var/vmail - e.g. [email protected] will have a mail directory of /var/vmail/example.com/me. But when he gives instructions about configuring Postfix Admin, he suggests this to be contained by Postfix Admin's config.inc.php: // Mailboxes // If you want to store the mailboxes per domain set this to 'YES'. // Examples: // YES: /usr/local/virtual/domain.tld/[email protected] // NO: /usr/local/virtual/[email protected] $CONF['domain_path'] = 'NO'; Is there an inconsistency?

    Read the article

  • Clean way to use mutable implementation of Immutable interfaces for encapsulation

    - by dsollen
    My code is working on some compost relationship which creates a tree structure, class A has many children of type B, which has many children of type C etc. The lowest level class, call it bar, also points to a connected bar class. This effectively makes nearly every object in my domain inter-connected. Immutable objects would be problematic due to the expense of rebuilding almost all of my domain to make a single change to one class. I chose to go with an interface approach. Every object has an Immutable interface which only publishes the getter methods. I have controller objects which constructs the domain objects and thus has reference to the full objects, thus capable of calling the setter methods; but only ever publishes the immutable interface. Any change requested will go through the controller. So something like this: public interface ImmutableFoo{ public Bar getBar(); public Location getLocation(); } public class Foo implements ImmutableFoo{ private Bar bar; private Location location; @Override public Bar getBar(){ return Bar; } public void setBar(Bar bar){ this.bar=bar; } @Override public Location getLocation(){ return Location; } } public class Controller{ Private Map<Location, Foo> fooMap; public ImmutableFoo addBar(Bar bar){ Foo foo=fooMap.get(bar.getLocation()); if(foo!=null) foo.addBar(bar); return foo; } } I felt the basic approach seems sensible, however, when I speak to others they always seem to have trouble envisioning what I'm describing, which leaves me concerned that I may have a larger design issue then I'm aware of. Is it problematic to have domain objects so tightly coupled, or to use the quasi-mutable approach to modifying them? Assuming that the design approach itself isn't inherently flawed the particular discussion which left me wondering about my approach had to do with the presence of business logic in the domain objects. Currently I have my setter methods in the mutable objects do error checking and all other logic required to verify and make a change to the object. It was suggested that this should be pulled out into a service class, which applies all the business logic, to simplify my domain objects. I understand the advantage in mocking/testing and general separation of logic into two classes. However, with a service method/object It seems I loose some of the advantage of polymorphism, I can't override a base class to add in new error checking or business logic. It seems, if my polymorphic classes were complicated enough, I would end up with a service method that has to check a dozen flags to decide what error checking and business logic applies. So, for example, if I wanted to have a childFoo which also had a size field which should be compared to bar before adding par my current approach would look something like this. public class Foo implements ImmutableFoo{ public void addBar(Bar bar){ if(!getLocation().equals(bar.getLocation()) throw new LocationException(); this.bar=bar; } } public interface ImmutableChildFoo extends ImmutableFoo{ public int getSize(); } public ChildFoo extends Foo implements ImmutableChildFoo{ private int size; @Override public int getSize(){ return size; } @Override public void addBar(Bar bar){ if(getSize()<bar.getSize()){ throw new LocationException(); super.addBar(bar); } My colleague was suggesting instead having a service object that looks something like this (over simplified, the 'service' object would likely be more complex). public interface ImmutableFoo{ ///original interface, presumably used in other methods public Location getLocation(); public boolean isChildFoo(); } public interface ImmutableSizedFoo implements ImmutableFoo{ public int getSize(); } public class Foo implements ImmutableSizedFoo{ public Bar bar; @Override public void addBar(Bar bar){ this.bar=bar; } @Override public int getSize(){ //default size if no size is known return 0; } @Override public boolean isChildFoo return false; } } public ChildFoo extends Foo{ private int size; @Override public int getSize(){ return size; } @Override public boolean isChildFoo(); return true; } } public class Controller{ Private Map<Location, Foo> fooMap; public ImmutableSizedFoo addBar(Bar bar){ Foo foo=fooMap.get(bar.getLocation()); service.addBarToFoo(foo, bar); returned foo; } public class Service{ public static void addBarToFoo(Foo foo, Bar bar){ if(foo==null) return; if(!foo.getLocation().equals(bar.getLocation())) throw new LocationException(); if(foo.isChildFoo() && foo.getSize()<bar.getSize()) throw new LocationException(); foo.setBar(bar); } } } Is the recommended approach of using services and inversion of control inherently superior, or superior in certain cases, to overriding methods directly? If so is there a good way to go with the service approach while not loosing the power of polymorphism to override some of the behavior?

    Read the article

  • SEO and unique IDs in urls

    - by kokoko
    I have a web site who's home page is at http://domain.com when a new user first hits the web site I'm creating a unique id of 5 chars for them (for example 'abcde' and redirecting them to http://domain.com/abcde so they can later bookmark and return to their workspace. My question is what's the best approach for SEO purposes, I need the main url domain.com to be indexed but google will also get the redirect and will not index the main page. I know about canonical urls, but this applies only when the domain.com url does not redirect also should I use 301 or 302 code in the redirect ?

    Read the article

  • Can't adjust brightness on Samsung RV420 with fn keys

    - by nicholascamp
    Typing ls /sys/class/backlight/*/brightness outputs /sys/class/backlight/intel_backlight/brightness /sys/class/backlight/samsung/brightness The max_brightness for the second is 8, but changing it with echo 2 | sudo tee /sys/class/backlight/samsung/brightness doesn't change brightness. I can do it by using intel_backlight: echo 2000 | sudo tee /sys/class/backlight/intel_backlight/brightness (max_brightness: cat /sys/class/backlight/intel_backlight/max_brightness outputs 4648). But I want to do this work with the fn brightness keys, as I always did. I don't know what happened to stop working, maybe the use of +1 monitor and removing it in a wrong time or a system update. I'm using Ubuntu 12.04 64 bits in an Samsung RV420 notebook. Kernel Version is 3.2.0-27-generic. Could you help me? Please tell me what more info should I provide. Thanks!

    Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >