Search Results

Search found 49521 results on 1981 pages for 'text size'.

Page 395/1981 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

• FreeBSD 8.1 unstable network connection

  - by frankcheong

  I have three FreeBSD 8.1 running on three different hardware and therefore consist of different network adapter as well (bce, bge and igb). I found that the network connection is kind of unstable which I have tried to scp some 10MB file and found that I cannot always get the files completed successfully. I have further checked with my network admin and he claim that the problem is being caused by the network driver which cannot support the load whereby he tried to ping using huge packet size (around 15k) and my server will drop packet consistently at a regular interval. I found that this statement may not be valid since the three server is using three different network drive and it would be quite impossible that the same problem is being caused by three different network adapter and thus different network driver. Since then I have tried to tune up the performance by playing around with the /etc/sysctl.conf figures with no luck. kern.ipc.somaxconn=1024 kern.ipc.shmall=3276800 kern.ipc.shmmax=1638400000 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Required by pf net.inet.ip.forwarding=1 #Network Performance Tuning kern.ipc.maxsockbuf=16777216 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.recvbuf_max=16777216 # Setting specifically for 1 or even 10Gbps network net.local.stream.sendspace=262144 net.local.stream.recvspace=262144 net.inet.tcp.local_slowstart_flightsize=10 net.inet.tcp.nolocaltimewait=1 net.inet.tcp.mssdflt=1460 net.inet.tcp.sendbuf_auto=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.sendspace=262144 net.inet.tcp.recvspace=262144 net.inet.udp.recvspace=262144 kern.ipc.maxsockbuf=16777216 kern.ipc.nmbclusters=32768 net.inet.tcp.delayed_ack=1 net.inet.tcp.delacktime=100 net.inet.tcp.slowstart_flightsize=179 net.inet.tcp.inflight.enable=1 net.inet.tcp.inflight.min=6144 # Reduce the cache size of slow start connection net.inet.tcp.hostcache.expire=1 Our network admin also claim that they see quite a lot of network up and down from their cisco switch log while I cannot find any up down message inside the dmesg. Have further checked the netstat -s but dont have concrete idea. tcp: 133695291 packets sent 39408539 data packets (3358837321 bytes) 61868 data packets (89472844 bytes) retransmitted 24 data packets unnecessarily retransmitted 0 resends initiated by MTU discovery 50756141 ack-only packets (2148 delayed) 0 URG only packets 0 window probe packets 4372385 window update packets 39781869 control packets 134898031 packets received 72339403 acks (for 3357601899 bytes) 190712 duplicate acks 0 acks for unsent data 59339201 packets (3647021974 bytes) received in-sequence 114 completely duplicate packets (135202 bytes) 27 old duplicate packets 0 packets with some dup. data (0 bytes duped) 42090 out-of-order packets (60817889 bytes) 0 packets (0 bytes) of data after window 0 window probes 3953896 window update packets 64181 packets received after close 0 discarded for bad checksums 0 discarded for bad header offset fields 0 discarded because packet too short 45192 discarded due to memory problems 19945391 connection requests 1323420 connection accepts 0 bad connection attempts 0 listen queue overflows 0 ignored RSTs in the windows 21133581 connections established (including accepts) 21268724 connections closed (including 32737 drops) 207874 connections updated cached RTT on close 207874 connections updated cached RTT variance on close 132439 connections updated cached ssthresh on close 42392 embryonic connections dropped 72339338 segments updated rtt (of 69477829 attempts) 390871 retransmit timeouts 0 connections dropped by rexmit timeout 0 persist timeouts 0 connections dropped by persist timeout 0 Connections (fin_wait_2) dropped because of timeout 13990 keepalive timeouts 2 keepalive probes sent 13988 connections dropped by keepalive 173044 correct ACK header predictions 36947371 correct data packet header predictions 1323420 syncache entries added 0 retransmitted 0 dupsyn 0 dropped 1323420 completed 0 bucket overflow 0 cache overflow 0 reset 0 stale 0 aborted 0 badack 0 unreach 0 zone failures 1323420 cookies sent 0 cookies received 1864 SACK recovery episodes 18005 segment rexmits in SACK recovery episodes 26066896 byte rexmits in SACK recovery episodes 147327 SACK options (SACK blocks) received 87473 SACK options (SACK blocks) sent 0 SACK scoreboard overflow 0 packets with ECN CE bit set 0 packets with ECN ECT(0) bit set 0 packets with ECN ECT(1) bit set 0 successful ECN handshakes 0 times ECN reduced the congestion window udp: 5141258 datagrams received 0 with incomplete header 0 with bad data length field 0 with bad checksum 1 with no checksum 0 dropped due to no socket 129616 broadcast/multicast datagrams undelivered 0 dropped due to full socket buffers 0 not for hashed pcb 5011642 delivered 5016050 datagrams output 0 times multicast source filter matched sctp: 0 input packets 0 datagrams 0 packets that had data 0 input SACK chunks 0 input DATA chunks 0 duplicate DATA chunks 0 input HB chunks 0 HB-ACK chunks 0 input ECNE chunks 0 input AUTH chunks 0 chunks missing AUTH 0 invalid HMAC ids received 0 invalid secret ids received 0 auth failed 0 fast path receives all one chunk 0 fast path multi-part data 0 output packets 0 output SACKs 0 output DATA chunks 0 retransmitted DATA chunks 0 fast retransmitted DATA chunks 0 FR's that happened more than once to same chunk 0 intput HB chunks 0 output ECNE chunks 0 output AUTH chunks 0 ip_output error counter Packet drop statistics: 0 from middle box 0 from end host 0 with data 0 non-data, non-endhost 0 non-endhost, bandwidth rep only 0 not enough for chunk header 0 not enough data to confirm 0 where process_chunk_drop said break 0 failed to find TSN 0 attempt reverse TSN lookup 0 e-host confirms zero-rwnd 0 midbox confirms no space 0 data did not match TSN 0 TSN's marked for Fast Retran Timeouts: 0 iterator timers fired 0 T3 data time outs 0 window probe (T3) timers fired 0 INIT timers fired 0 sack timers fired 0 shutdown timers fired 0 heartbeat timers fired 0 a cookie timeout fired 0 an endpoint changed its cookiesecret 0 PMTU timers fired 0 shutdown ack timers fired 0 shutdown guard timers fired 0 stream reset timers fired 0 early FR timers fired 0 an asconf timer fired 0 auto close timer fired 0 asoc free timers expired 0 inp free timers expired 0 packet shorter than header 0 checksum error 0 no endpoint for port 0 bad v-tag 0 bad SID 0 no memory 0 number of multiple FR in a RTT window 0 RFC813 allowed sending 0 RFC813 does not allow sending 0 times max burst prohibited sending 0 look ahead tells us no memory in interface 0 numbers of window probes sent 0 times an output error to clamp down on next user send 0 times sctp_senderrors were caused from a user 0 number of in data drops due to chunk limit reached 0 number of in data drops due to rwnd limit reached 0 times a ECN reduced the cwnd 0 used express lookup via vtag 0 collision in express lookup 0 times the sender ran dry of user data on primary 0 same for above 0 sacks the slow way 0 window update only sacks sent 0 sends with sinfo_flags !=0 0 unordered sends 0 sends with EOF flag set 0 sends with ABORT flag set 0 times protocol drain called 0 times we did a protocol drain 0 times recv was called with peek 0 cached chunks used 0 cached stream oq's used 0 unread messages abandonded by close 0 send burst avoidance, already max burst inflight to net 0 send cwnd full avoidance, already max burst inflight to net 0 number of map array over-runs via fwd-tsn's ip: 137814085 total packets received 0 bad header checksums 0 with size smaller than minimum 0 with data size < data length 0 with ip length > max ip packet size 0 with header length < data size 0 with data length < header length 0 with bad options 0 with incorrect version number 1200 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 300 packets reassembled ok 137813009 packets for this host 530 packets for unknown/unsupported protocol 0 packets forwarded (0 packets fast forwarded) 61 packets not forwardable 0 packets received for unknown multicast group 0 redirects sent 137234598 packets sent from this host 0 packets sent with fabricated ip header 685307 output packets dropped due to no bufs, etc. 52 output packets discarded due to no route 300 output datagrams fragmented 1200 fragments created 0 datagrams that can't be fragmented 0 tunneling packets that can't find gif 0 datagrams with bad address in header icmp: 0 calls to icmp_error 0 errors not generated in response to an icmp message Output histogram: echo reply: 305 0 messages with bad code fields 0 messages less than the minimum length 0 messages with bad checksum 0 messages with bad length 0 multicast echo requests ignored 0 multicast timestamp requests ignored Input histogram: destination unreachable: 530 echo: 305 305 message responses generated 0 invalid return addresses 0 no return routes ICMP address mask responses are disabled igmp: 0 messages received 0 messages received with too few bytes 0 messages received with wrong TTL 0 messages received with bad checksum 0 V1/V2 membership queries received 0 V3 membership queries received 0 membership queries received with invalid field(s) 0 general queries received 0 group queries received 0 group-source queries received 0 group-source queries dropped 0 membership reports received 0 membership reports received with invalid field(s) 0 membership reports received for groups to which we belong 0 V3 reports received without Router Alert 0 membership reports sent arp: 376748 ARP requests sent 3207 ARP replies sent 245245 ARP requests received 80845 ARP replies received 326090 ARP packets received 267712 total packets dropped due to no ARP entry 108876 ARP entrys timed out 0 Duplicate IPs seen ip6: 2226633 total packets received 0 with size smaller than minimum 0 with data size < data length 0 with bad options 0 with incorrect version number 0 fragments received 0 fragments dropped (dup or out of space) 0 fragments dropped after timeout 0 fragments that exceeded limit 0 packets reassembled ok 2226633 packets for this host 0 packets forwarded 0 packets not forwardable 0 redirects sent 2226633 packets sent from this host 0 packets sent with fabricated ip header 0 output packets dropped due to no bufs, etc. 8 output packets discarded due to no route 0 output datagrams fragmented 0 fragments created 0 datagrams that can't be fragmented 0 packets that violated scope rules 0 multicast packets which we don't join Input histogram: UDP: 2226633 Mbuf statistics: 962679 one mbuf 1263954 one ext mbuf 0 two or more ext mbuf 0 packets whose headers are not continuous 0 tunneling packets that can't find gif 0 packets discarded because of too many headers 0 failures of source address selection Source addresses selection rule applied: icmp6: 0 calls to icmp6_error 0 errors not generated in response to an icmp6 message 0 errors not generated because of rate limitation 0 messages with bad code fields 0 messages < minimum length 0 bad checksums 0 messages with bad length Histogram of error messages to be generated: 0 no route 0 administratively prohibited 0 beyond scope 0 address unreachable 0 port unreachable 0 packet too big 0 time exceed transit 0 time exceed reassembly 0 erroneous header field 0 unrecognized next header 0 unrecognized option 0 redirect 0 unknown 0 message responses generated 0 messages with too many ND options 0 messages with bad ND options 0 bad neighbor solicitation messages 0 bad neighbor advertisement messages 0 bad router solicitation messages 0 bad router advertisement messages 0 bad redirect messages 0 path MTU changes rip6: 0 messages received 0 checksum calculations on inbound 0 messages with bad checksum 0 messages dropped due to no socket 0 multicast messages dropped due to no socket 0 messages dropped due to full socket buffers 0 delivered 0 datagrams output netstat -m 516/5124/5640 mbufs in use (current/cache/total) 512/1634/2146/32768 mbuf clusters in use (current/cache/total/max) 512/1536 mbuf+clusters out of packet secondary zone in use (current/cache) 0/1303/1303/12800 4k (page size) jumbo clusters in use (current/cache/total/max) 0/0/0/6400 9k jumbo clusters in use (current/cache/total/max) 0/0/0/3200 16k jumbo clusters in use (current/cache/total/max) 1153K/9761K/10914K bytes allocated to network (current/cache/total) 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters) 0/0/0 requests for jumbo clusters denied (4k/9k/16k) 0/8/6656 sfbufs in use (current/peak/max) 0 requests for sfbufs denied 0 requests for sfbufs delayed 0 requests for I/O initiated by sendfile 0 calls to protocol drain routines Anyone got an idea what might be the possible cause?

  Read the article

• .NET SerialPort DataReceived event not firing

  - by Klay

  I have a WPF test app for evaluating event-based serial port communication (vs. polling the serial port). The problem is that the DataReceived event doesn't seem to be firing at all. I have a very basic WPF form with a TextBox for user input, a TextBlock for output, and a button to write the input to the serial port. Here's the code: public partial class Window1 : Window { SerialPort port; public Window1() { InitializeComponent(); port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.Open(); } void port_DataReceived(object sender, SerialDataReceivedEventArgs e) { Debug.Print("receiving!"); string data = port.ReadExisting(); Debug.Print(data); outputText.Text = data; } private void Button_Click(object sender, RoutedEventArgs e) { Debug.Print("sending: " + inputText.Text); port.WriteLine(inputText.Text); } } Now, here are the complicating factors: The laptop I'm working on has no serial ports, so I'm using a piece of software called Virtual Serial Port Emulator to setup a COM2. VSPE has worked admirably in the past, and it's not clear why it would only malfunction with .NET's SerialPort class, but I mention it just in case. When I hit the button on my form to send the data, my Hyperterminal window (connected on COM2) shows that the data is getting through. Yes, I disconnect Hyperterminal when I want to test my form's ability to read the port. I've tried opening the port before wiring up the event. No change. I've read through another post here where someone else is having a similar problem. None of that info has helped me in this case. EDIT: Here's the console version (modified from http://mark.michaelis.net/Blog/TheBasicsOfSystemIOPortsSerialPort.aspx): class Program { static SerialPort port; static void Main(string[] args) { port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.Open(); string text; do { text = Console.ReadLine(); port.Write(text + "\r\n"); } while (text.ToLower() != "q"); } public static void port_DataReceived(object sender, SerialDataReceivedEventArgs args) { string text = port.ReadExisting(); Console.WriteLine("received: " + text); } } This should eliminate any concern that it's a Threading issue (I think). This doesn't work either. Again, Hyperterminal reports the data sent through the port, but the console app doesn't seem to fire the DataReceived event. EDIT #2: I realized that I had two separate apps that should both send and receive from the serial port, so I decided to try running them simultaneously... If I type into the console app, the WPF app DataReceived event fires, with the expected threading error (which I know how to deal with). If I type into the WPF app, the console app DataReceived event fires, and it echoes the data. I'm guessing the issue is somewhere in my use of the VSPE software, which is set up to treat one serial port as both input and output. And through some weirdness of the SerialPort class, one instance of a serial port can't be both the sender and receiver. Anyway, I think it's solved.

  Read the article

• Wordpress and Jquery slide

  - by kwek-kwek

  I am integrating a Jquery slider inside of wordpress here is the demo of the slider. I can see the div that is their but for some reason it is not showing up. View the working site here Now my problem is that this code: <script type="text/javascript"> var _siteRoot='index.php',_root='index.php';</script> <script type="text/javascript" src="<?php bloginfo('template_url'); ?>/js/jquery.js"></script> <script type="text/javascript" src="<?php bloginfo('template_url'); ?>/js/scripts.js"></script> represents and index.html, but in wordpress I enabled permalinks. Any clue what would be the _siteRoot is? here is the complete code HEADER <script type="text/javascript"> var _siteRoot='index.php',_root='index.php';</script> <script type="text/javascript" src="<?php bloginfo('template_url'); ?>/js/jquery.js"></script> <script type="text/javascript" src="<?php bloginfo('template_url'); ?>/js/scripts.js"></script> Here are the images: <div id="slide-holder"> <div id="slide-runner"> <a href=""><img id="slide-img-1" src="images/nature-photo.png" class="slide" alt="" /></a> <a href=""><img id="slide-img-2" src="images/nature-photo1.png" class="slide" alt="" /></a> <a href=""><img id="slide-img-3" src="images/nature-photo2.png" class="slide" alt="" /></a> <a href=""><img id="slide-img-4" src="images/nature-photo3.png" class="slide" alt="" /></a> <a href=""><img id="slide-img-5" src="images/nature-photo4.png" class="slide" alt="" /></a> <a href=""><img id="slide-img-6" src="images/nature-photo4.png" class="slide" alt="" /></a> <a href=""><img id="slide-img-7" src="images/nature-photo6.png" class="slide" alt="" /></a> <div id="slide-controls"> <p id="slide-client" class="text"><strong>post: </strong><span></span></p> <p id="slide-desc" class="text"></p> <p id="slide-nav"></p> </div> </div> <!--content featured gallery here --> </div> And the footer <script type="text/javascript"> if(!window.slider) var slider={};slider.data=[{"id":"slide-img-1"},{"id":"slide-img-2"},{"id":"slide-img-3"},{"id":"slide-img-4"},{"id":"slide-img-5"},{"id":"slide-img-6"},{"id":"slide-img-7"},{"id":"slide-img-8"}]; </script>

  Read the article

• The HTML5 doctype is not triggering standards mode in IE8

  - by El Guapo

  i work for a company where all our sites currently use the XHTML 1.0 transitional doctype (yes i know it is very old school). I want to change them all to use the HTML5 doctype seeing as it is backwards compatible. One of the reasons why i want to make the switch is because in IE8 if someone has the developer tools installed then the old XHTML doctype switches the browser into compatibility mode and renders the page as IE7. From reading up on it i was led to believe that the HTML5 doctype will set any page to render in standards mode, but this is not happening when i test it on our staging server it still flips into IE7 rendering mode. The weird thing is if i save the page with HTML5 doctype locally and open it, it is rendering in IE8 standards mode. There must be something else causing it to drop into compatibility IE7 rendering. Any ideas what this could be? Below is the head of the test page i have been looking at: <!DOCTYPE html > <html xmlns="http://www.w3.org/1999/xhtml" xmlns:og="http://opengraphprotocol.org/schema/" xmlns:fb="http://www.facebook.com/2008/fbml"> <head> <title>Burton - Mens Clothing - Mens Fashion - Burton Menswear</title> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <meta name="description" content="Burton is one of the UK's leading men's clothing &amp; fashion retailers, with a range of men's clothing designed to make you look &amp; feel good. Find formal &amp; casual clothes &amp; accessories for men online at Burton menswear"/> <meta name="keywords" content="menswear, clothes for men, clothing for men, men clothes, men's fashion, men's wear, men's clothing online, men's clothes online, men's clothes shop, burton men's, burton menswear, burton uk, burton"/> <script type="text/javascript">document.getElementsByTagName('html')[0].className = 'js';</script> <link rel="stylesheet" type="text/css" href="http://eu.burton-menswear.com/wcsstore/ConsumerDirectStorefrontAssetStore/images/colors/color2/v3/css/screen.css" /> <link rel="stylesheet" type="text/css" href="http://eu.burton-menswear.com/wcsstore/ConsumerDirectStorefrontAssetStore/images/colors/color2/v3/css/print.css" media="print"/> <link rel="stylesheet" type="text/css" href="http://eu.burton-menswear.com/wcsstore/ConsumerDirectStorefrontAssetStore/images/colors/color2/v3/css/brand.css" /> <!--[if lt IE 8]> <link rel="stylesheet" href="http://eu.burton-menswear.com/wcsstore/ConsumerDirectStorefrontAssetStore/images/colors/color2/v3/css/ie.css" type="text/css" media="screen, projection"> <![endif]--> <meta http-equiv="content-language" content="en-gb" /> <link rel="shortcut icon" type="image/x-icon" href="http://eu.burton-menswear.com/favicon.ico" /> <link rel="search" type="application/opensearchdescription+xml" title="burton.co.uk Search" href="http://eu.burton-menswear.com/burton-search.xml"/> <!-- Start Summit Tag --> <script type="text/javascript"> var __stormJs = "t1.stormiq.com/dcv4/jslib/3286_D92B7532_4A18_46A8_864A_5FDF1DF25844.js"; </script> <script type="text/javascript" src="http://eu.burton-menswear.com/javascript/track.js"></script> <!-- End Summit Tag --> <!-- Start QuBit Tag --> <script src=//d3c3cq33003psk.cloudfront.net/opentag-31935-42109.js async defer></script> <!-- End QuBit Tag --> <link type="text/css" rel="stylesheet" href="http://reviews.br.wcstage.arcadiagroup.ltd.uk/bvstaging/static/6028-en_gb/bazaarvoice.css" ></link> </head>

  Read the article

• Delphi 2010 differs in Canvas transparency compared to Delphi 7?

  - by Tom1952

  I'm porting some very old code from Delph7 to Delphi2010 with a few changes as possible to the existing code base for the usual reasons. First: the good news for anyone who hasn't jumped yet: it's not as daunting as it may look! I'm actually pleased (& surprised) at how easy 1,000,000+ lines of code have moved across. And what a relief to be back on the leading edge! Delphi 2010 has so many great enhancements. However, I'm having a cosmetic problem with some TStringGrids and TDbGrids descendants. In the last century (literally!) someone wrote the two methods below. The first method is used to justify text. When run in Delphi 2010, the new text and the unjustified text to both appear in the cells written to. Of course it's a mess visually, almost illegible. Sometimes, as a result of the second method is use, the grid cells are actually semi-transparent, with text from the window below showing through. (Again, not pretty!) It appears to me that Delphi 2010's TDbGrid and TStringGrid have some differences in the way they handle transparency? I haven't much experience in this area of Delphi (in fact, I have no idea what the 2nd method is actually doing!) and was hoping someone could give me some pointers on what's going on and how to fix it. TIA! Method 1 procedure TForm1.gridDrawCell(Sender: TObject; Col, Row: Integer; Rect: TRect; State: TGridDrawState); {Used to align text in cells.} var x: integer; begin if (Row > 0) AND (Col > 0) then begin SetTextAlign(grdTotals.Canvas.Handle, TA_RIGHT); x := Rect.Right - 2; end else begin SetTextAlign(grdTotals.Canvas.Handle, TA_CENTER); x := (Rect.Left + Rect.Right) div 2; end; grdTotals.Canvas.TextRect(Rect, x, Rect.Top+2, grdTotals.Cells[Col,Row]); end; Method 2 procedure WriteText(ACanvas: TCanvas; ARect: TRect; DX, DY: Integer; const Text: string; TitleBreak: TTitleBreak; Alignment: TAlignment); const AlignFlags: array [TAlignment] of Integer = (DT_LEFT or { DT_WORDBREAK or } DT_EXPANDTABS or DT_NOPREFIX, DT_RIGHT or { DT_WORDBREAK or } DT_EXPANDTABS or DT_NOPREFIX, DT_CENTER or { DT_WORDBREAK or } DT_EXPANDTABS or DT_NOPREFIX); var ABitmap: TBitmap; AdjustBy: Integer; B, R: TRect; WordBreak: Integer; begin WordBreak := 0; if (TitleBreak = tbAlways) or ((TitleBreak = tbDetect) and (Pos(Chr(13) + Chr(10), Text) = 0)) then WordBreak := DT_WORDBREAK; ABitmap := TBitmap.Create; try ABitmap.Canvas.Lock; try AdjustBy := 1; if (Alignment = taRightJustify) then Inc(AdjustBy); with ABitmap, ARect do begin Width := Max(Width, Right - Left); Height := Max(Height, Bottom - Top); R := Rect(DX, DY, Right - Left - AdjustBy, Bottom - Top - 1); { @@@ } B := Rect(0, 0, Right - Left, Bottom - Top); end; with ABitmap.Canvas do begin Font := ACanvas.Font; Brush := ACanvas.Brush; Brush.Style := bsSolid; FillRect(B); SetBkMode(Handle, TRANSPARENT); DrawText(Handle, PChar(Text), Length(Text), R, AlignFlags[Alignment] or WordBreak); end; ACanvas.CopyRect(ARect, ABitmap.Canvas, B); finally ABitmap.Canvas.Unlock; end; finally ABitmap.Free; end; end;

  Read the article

• using JQuery and Prototype in the same page; more explanation needed!

  - by xenogen

  Hi everybody! I'm continuously having the problem when i use jquery lightbox (which runs prototype) and jquery news slider. I tried the "noconflict" method. The problem is I don't know the exact place to put the code. So, here, i'm putting my scripts within . So, please troubleshoot it and explain me where to put the patch. thank you very much. <head> <meta http-equiv="Content-Language" content="en-us"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <title>Jquery</title> <script type="text/javascript" src="lb/js/prototype.js"></script> <script type="text/javascript" src="lb/js/scriptaculous.js?load=effects"></script> <script type="text/javascript" src="lb/js/lightbox.js"></script> <link href="lb/css/lightbox.css" rel="stylesheet" type="text/css" /> <script type="text/javascript" src="news/jquery-1.2.3.pack.js"></script> <script type="text/javascript" src="news/jquery.easynews.js"></script> <style> html { background-color: #FFA928; font: normal 76% "Arial", "Lucida Grande",Verdana, Sans-Serif; color:black; } a { text-decoration: none; font-weight: bold; } .news_style{ display:none; } .news_show { background-color: white; color:black; width:350px; height:150px; font: normal 100% "Arial", "Lucida Grande",Verdana, Sans-Serif; overflow: auto; } .news_border { background-color: white; width:350px; height:150px; font: normal 100% "Arial", "Lucida Grande",Verdana, Sans-Serif; border: 1px solid gray; padding: 5px 5px 5px 5px; overflow: auto; } .news_mark{ background-color:white ; font: normal 70% "Arial", "Lucida Grande",Verdana, Sans-Serif; border: 0px solid gray; width:361px; height:35px; color:black; text-align:center; } .news_title{ font: bold 120% "Arial", "Lucida Grande",Verdana, Sans-Serif; border: 0px solid gray; padding: 5px 0px 9px 5px; color:black; } .news_show img{ margin-left: 5px; margin-right: 5px; } .buttondiv { position: absolute; /*float: left;*/ /*top: 169px;*/ padding: 5px 5px 5px 5px; background-color:white ; border: 1px solid gray; /*border-top-color: white;*/ border-top:none; height:20px; } </style> <script> $(document).ready(function(){ var newsoption1 = { firstname: "mynews", secondname: "showhere", thirdname:"news_display", fourthname:"news_button", newsspeed:'6000' } $.init_news(newsoption1); var myoffset=$('#news_button').offset(); var mytop=myoffset.top-1; $('#news_button').css({top:mytop}); }); </script> </head>

  Read the article

• validating cascading dropdownlist

  - by shruti

  i am working on MVC.Net. in that i have used cascading dropdownlist. I want to do validations for blank field. the view page coding is: Select Category: <%= Html.DropDownList("Makes", ViewData["Makes"] as SelectList,"Select Category")% Select Subcategory: <%= Html.CascadingDropDownList("Models", "Makes")% the code on controller: public ActionResult AddSubCategoryPage() { var makeList = new SelectList(entityObj.Category.ToList(), "Category_id", "Category_name"); ViewData["Makes"] = makeList; // Create Models view data var modelList = new CascadingSelectList(entityObj.Subcategory1.ToList(), "Category_id", "Subcategory_id", "Subcategory_name"); ViewData["Models"] = modelList; return View("AddSubCategoryPage"); } and for that i have made one class: public static class JavaScriptExtensions { public static string CascadingDropDownList(this HtmlHelper helper, string name, string associatedDropDownList) { var sb = new StringBuilder(); // render select tag sb.AppendFormat("<select name='{0}' id='{0}'></select>", name); sb.AppendLine(); // render data array sb.AppendLine("<script type='text/javascript'>"); var data = (CascadingSelectList)helper.ViewDataContainer.ViewData[name]; var listItems = data.GetListItems(); var colArray = new List<string>(); foreach (var item in listItems) colArray.Add(String.Format("{{key:'{0}',value:'{1}',text:'{2}'}}", item.Key, item.Value, item.Text)); var jsArray = String.Join(",", colArray.ToArray()); sb.AppendFormat("$get('{0}').allOptions=[{1}];", name, jsArray); sb.AppendLine(); sb.AppendFormat("$addHandler($get('{0}'), 'change', Function.createCallback(bindDropDownList, $get('{1}')));", associatedDropDownList, name); sb.AppendLine(); sb.AppendLine("</script>"); return sb.ToString(); } } public class CascadingSelectList { private IEnumerable _items; private string _dataKeyField; private string _dataValueField; private string _dataTextField; public CascadingSelectList(IEnumerable items, string dataKeyField, string dataValueField, string dataTextField) { _items = items; _dataKeyField = dataKeyField; _dataValueField = dataValueField; _dataTextField = dataTextField; } public List<CascadingListItem> GetListItems() { var listItems = new List<CascadingListItem>(); foreach (var item in _items) { var key = DataBinder.GetPropertyValue(item, _dataKeyField).ToString(); var value = DataBinder.GetPropertyValue(item, _dataValueField).ToString(); var text = DataBinder.GetPropertyValue(item, _dataTextField).ToString(); listItems.Add(new CascadingListItem(key, value, text)); } return listItems; } } public class CascadingListItem { public CascadingListItem(string key, string value, string text) { this.Key = key; this.Value = value; this.Text = text; } public string Key { get; set; } public string Value { get; set; } public string Text { get; set; } } but when i run the aaplication it gives me following error: Server Error in '/' Application. The parameters dictionary contains a null entry for parameter 'Models' of non-nullable type 'System.Int32' for method 'System.Web.Mvc.ActionResult AddSubCategoryPage(Int32, System.String, System.String)' in 'CMS.Controllers.HomeController'. An optional parameter must be a reference type, a nullable type, or be declared as an optional parameter. Parameter name: parameters . plz help me.

  Read the article

• Insert Error:CREATE DATABASE permission denied in database 'master'. cannot attach the file

  - by user1300580

  i have a register page on my website I am creating and it saves the data entered by the user into a database however when I click the register button i am coming across the following error: Insert Error:CREATE DATABASE permission denied in database 'master'. Cannot attach the file 'C:\Users\MyName\Documents\MyName\Docs\Project\SJ\App_Data\SJ-Database.mdf' as database 'SJ-Database'. These are my connection strings: <connectionStrings> <add name="ApplicationServices" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|\aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient"/> <add name="MyConsString" connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|SJ-Database.mdf; Initial Catalog=SJ-Database; Integrated Security=SSPI;" providerName="System.Data.SqlClient" /> </connectionStrings> Register page code: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using System.Data; using System.Data.SqlClient; public partial class About : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } public string GetConnectionString() { //sets the connection string from your web config file "ConnString" is the name of your Connection String return System.Configuration.ConfigurationManager.ConnectionStrings["MyConsString"].ConnectionString; } private void ExecuteInsert(string name, string gender, string age, string address, string email) { SqlConnection conn = new SqlConnection(GetConnectionString()); string sql = "INSERT INTO Register (Name, Gender, Age, Address, Email) VALUES " + " (@Name,@Gender,@Age,@Address,@Email)"; try { conn.Open(); SqlCommand cmd = new SqlCommand(sql, conn); SqlParameter[] param = new SqlParameter[6]; //param[0] = new SqlParameter("@id", SqlDbType.Int, 20); param[0] = new SqlParameter("@Name", SqlDbType.VarChar, 50); param[1] = new SqlParameter("@Gender", SqlDbType.Char, 10); param[2] = new SqlParameter("@Age", SqlDbType.Int, 100); param[3] = new SqlParameter("@Address", SqlDbType.VarChar, 50); param[4] = new SqlParameter("@Email", SqlDbType.VarChar, 50); param[0].Value = name; param[1].Value = gender; param[2].Value = age; param[3].Value = address; param[4].Value = email; for (int i = 0; i < param.Length; i++) { cmd.Parameters.Add(param[i]); } cmd.CommandType = CommandType.Text; cmd.ExecuteNonQuery(); } catch (System.Data.SqlClient.SqlException ex) { string msg = "Insert Error:"; msg += ex.Message; throw new Exception(msg); } finally { conn.Close(); } } protected void cmdRegister_Click(object sender, EventArgs e) { if (txtRegEmail.Text == txtRegEmailCon.Text) { //call the method to execute insert to the database ExecuteInsert(txtRegName.Text, txtRegAge.Text, ddlRegGender.SelectedItem.Text, txtRegAddress.Text, txtRegEmail.Text); Response.Write("Record was successfully added!"); ClearControls(Page); } else { Response.Write("Email did not match"); txtRegEmail.Focus(); } } public static void ClearControls(Control Parent) { if (Parent is TextBox) { (Parent as TextBox).Text = string.Empty; } else { foreach (Control c in Parent.Controls) ClearControls(c); } } }

  Read the article

• Why does jquery leak memory so badly?

  - by Thomas Lane

  This is kind of a follow-up to a question I posted last week: http://stackoverflow.com/questions/2429056/simple-jquery-ajax-call-leaks-memory-in-ie I love the jquery syntax and all of its nice features, but I've been having trouble with a page that automatically updates table cells via ajax calls leaking memory. So I created two simple test pages for experimenting. Both pages do an ajax call every .1 seconds. After each successful ajax call, a counter is incremented and the DOM is updated. The script stops after 1000 cycles. One uses jquery for both the ajax call and to update the DOM. The other uses the Yahoo API for the ajax and does a document.getElementById(...).innerHTML to update the DOM. The jquery version leaks memory badly. Running in drip (on XP Home with IE7), it starts at 9MB and finishes at about 48MB, with memory growing linearly the whole time. If I comment out the line that updates the DOM, it still finishes at 32MB, suggesting that even simple DOM updates leak a significant amount of memory. The non-jquery version starts and finishes at about 9MB, regardless of whether it updates the DOM. Does anyone have a good explanation of what is causing jquery to leak so badly? Am I missing something obvious? Is there a circular reference that I'm not aware of? Or does jquery just have some serious memory issues? Here is the source for the leaky (jquery) version: <html> <head> <script type="text/javascript" src="http://www.google.com/jsapi"></script> <script type="text/javascript"> google.load('jquery', '1.4.2'); </script> <script type="text/javascript"> var counter = 0; leakTest(); function leakTest() { $.ajax({ url: '/html/delme.x', type: 'GET', success: incrementCounter }); } function incrementCounter(data) { if (counter<1000) { counter++; $('#counter').text(counter); setTimeout(leakTest,100); } else $('#counter').text('finished.'); } </script> </head> <body> <div>Why is memory usage going up?</div> <div id="counter"></div> </body> </html> And here is the non-leaky version: <html> <head> <script type="text/javascript" src="http://yui.yahooapis.com/2.8.0r4/build/yahoo/yahoo-min.js"></script> <script type="text/javascript" src="http://yui.yahooapis.com/2.8.0r4/build/event/event-min.js"></script> <script type="text/javascript" src="http://yui.yahooapis.com/2.8.0r4/build/connection/connection_core-min.js"></script> <script type="text/javascript"> var counter = 0; leakTest(); function leakTest() { YAHOO.util.Connect.asyncRequest('GET', '/html/delme.x', {success:incrementCounter}); } function incrementCounter(o) { if (counter<1000) { counter++; document.getElementById('counter').innerHTML = counter; setTimeout(leakTest,100); } else document.getElementById('counter').innerHTML = 'finished.' } </script> </head> <body> <div>Memory usage is stable, right?</div> <div id="counter"></div> </body> </html>

  Read the article

• Form loop db insertion + javascript altering

  - by MrStatic

  I basically need to check if there is an easier way to do this before I rewrite all the code. I have a fairly large form that I have each input named with []'s on the end so I can loop through via php for easy insertion. <input type="hidden" name="currentdate[]" value="<?php echo date('mdY'); ?>"> <td><input style="width: 50px" type="text" name="jackname[]" /></td> <td><input style="width: 20px" type="text" name="jackkey[]" /></td> <td><input style="width: 50px" type="text" name="jackbeg[]" /></td> <td><input style="width: 50px" type="text" name="jackend[]" /></td> <td><input style="width: 50px" type="text" name="jackbegveh" /></td> <td><input style="width: 50px" type="text" name="jackbegmon[]" /></td> <td><input style="width: 50px" type="text" name="jackendveh" /></td> <td><input style="width: 50px" type="text" name="jackendmon[]" /></td> <td><input style="width: 50px" type="text" name="jacktx" disabled /></td> There are quite a few more fields but you get the idea. I then use foreach ($_POST['jackname'] as $row=>$name) { $jackname = $name; $date = $_POST['currentdate'][$row]; $jackkey = $_POST['jackkey'][$row]; $jackbeg = $_POST['jackbeg'][$row]; $jackend = $_POST['jackend'][$row]; $jackbegveh = $_POST['jackbegveh'][$row]; $jackbegmon = $_POST['jackbegmon'][$row]; $jackendveh = $_POST['jackendveh'][$row]; $jackendmon = $_POST['jackendmon'][$row]; $jacktx = $_POST['jacktx'][$row]; if ($jacktx == '') { $jacktx = '0'; } if (empty($jackkey)) { echo 'Skipped empty! <br />'; } else { mysql_query("INSERT INTO `ticket_counts_jackson` VALUES('', '" . $date . "', '" . $jackname . "', '" . $jackkey . "', '" . $jackbeg . "', '" . $jackend . "', '" . $jackbegveh . "', '" . $jackbegmon . "', '" . $jackendveh . "', '" . $jackendmon . "', '" . $jacktx . "')", $mysql_link) or die(mysql_error()); echo 'Added the info the db! <br />'; } } I use the above to loop through the form and add it to the database. Now for my main question. I also want to add in some javascript to do a little math. Basically ($jackendveh - $jackbegveh) - ($jackendmon - $jackbegmon) and have that displayed in jacktx. Currently the only way I know of adding in the math calculations is to rename each input to a unique name and then rewrite my insert from 1 insert to 8 inserts.

  Read the article

• NullPointerException using EndlessAdapter with SimpleAdapter

  - by android_dev

  Hello, I am using EndlessAdapter from commonsguy with a SimpleAdapter. I can load data when I make a scroll down without problems, but I have a NullPointerException when I make a scroll up. The problem is in the method @Override public View getView(int position, View convertView,ViewGroup parent) { return wrapped.getView(position, convertView, parent); } from the class AdapterWrapper. The call to wrapped.getView(position, convertView,parent) raises the exception and I don´t know why. This is my implementation of EndlessAdapter: //Inner class in SearchTextActivity class DemoAdapter extends EndlessAdapter { private RotateAnimation rotate = null; DemoAdapter(ArrayList<HashMap<String, String>> result) { super(new SimpleAdapter(SearchTracksActivity.this, result, R.layout.textlist_item, PROJECTION_COLUMNS, VIEW_MAPPINGS)); rotate = new RotateAnimation( 0f, 360f, Animation.RELATIVE_TO_SELF, 0.5f, Animation.RELATIVE_TO_SELF, 0.5f); rotate.setDuration(600); rotate.setRepeatMode(Animation.RESTART); rotate.setRepeatCount(Animation.INFINITE); } @Override protected View getPendingView(ViewGroup parent) { View row=getLayoutInflater().inflate(R.layout.textlist_item, null); View child=row.findViewById(R.id.title); child.setVisibility(View.GONE); child=row.findViewById(R.id.username); child.setVisibility(View.GONE); child=row.findViewById(R.id.throbber); child.setVisibility(View.VISIBLE); child.startAnimation(rotate); return row; } @Override @SuppressWarnings("unchecked") protected void rebindPendingView(int position, View row) { HashMap<String, String> res = (HashMap<String, String>)getWrappedAdapter().getItem(position); View child=row.findViewById(R.id.title); ((TextView)child).setText(res.get("title")); child.setVisibility(View.VISIBLE); child=row.findViewById(R.id.username); ((TextView)child).setText(res.get("username")); child.setVisibility(View.VISIBLE); ImageView throbber=(ImageView)row.findViewById(R.id.throbber); throbber.setVisibility(View.GONE); throbber.clearAnimation(); } boolean mFinal = true; @Override protected boolean cacheInBackground() { EditText searchText = (EditText)findViewById(R.id.searchText); String textToSearch = searchText.getText().toString(); Util.getSc().searchText(textToSearch , offset, limit, new ResultListener<ArrayList<Text>>() { @Override public void onError(Exception e) { e.toString(); mFinal = false; } @Override public void onSuccess(ArrayList<Text> result) { if(result.size() == 0){ mFinal = false; }else{ texts.addAll(result); offset++; } } }); return mFinal; } @Override protected void appendCachedData() { for(Text text : texts){ result.add(text.getMapValues()); } texts.clear(); } } And I use it this way: public class SearchTextActivity extends AbstractListActivity { private static final String[] PROJECTION_COLUMNS = new String[] { TextStore.Text.TITLE, TextStore.Text.USER_NAME}; private static final int[] VIEW_MAPPINGS = new int[] { R.id.Text_title, R.id.Text_username}; ArrayList<HashMap<String, String>> result; static ArrayList<Text> texts; static int offset = 0; static int limit = 1; @Override void onAbstractCreate(Bundle savedInstance) { setContentView(R.layout.search_tracks); setupViews(); } private void setupViews() { ImageButton searchButton = (ImageButton)findViewById(R.id.searchButton); updateView(); } SimpleAdapter adapter; void updateView(){ if(result == null) { result = new ArrayList<HashMap<String, String>>(); } if(tracks == null) { texts = new ArrayList<Text>(); } } public void sendQuery(View v){ offset = 0; texts.clear(); result.clear(); setListAdapter(new DemoAdapter(result)); } } Does anybody knows what could be the problem? Thank you in advance

  Read the article

• wxPthon problems with Wrapping StaticText

  - by Scott B

  Hello. I am having an issue with wxPython. A simplified version of the code is posted below (white space, comments, etc removed to reduce size - but the general format to my program is kept roughly the same). When I run the script, the static text correctly wraps as it should, but the other items in the panel do not move down (they act as if the statictext is only one line and thus not everything is visible). If I manually resize the window/frame, even just a tiny amount, everything gets corrected and displays as it is should. I took screen shots to show this behavior, but I just created this account and thus don't have the required 10 reputation points to be allowed to post pictures. Why does it not display correctly to begin with? I've tried all sorts of combination's of GetParent().Refresh() or Update() and GetTopLevelParent().Update() or Refresh(). I've tried everything I can think of but cannot get it to display correctly without manually resizing the frame/window. Once re-sized, it works exactly as I want it to. Information: Windows XP Python 2.5.2 wxPython 2.8.11.0 (msw-unicode) Any suggestions? Thanks! Code: #! /usr/bin/python import wx class StaticWrapText(wx.PyControl): def __init__(self, parent, id=wx.ID_ANY, label='', pos=wx.DefaultPosition, size=wx.DefaultSize, style=wx.NO_BORDER, validator=wx.DefaultValidator, name='StaticWrapText'): wx.PyControl.__init__(self, parent, id, pos, size, style, validator, name) self.statictext = wx.StaticText(self, wx.ID_ANY, label, style=style) self.wraplabel = label #self.wrap() def wrap(self): self.Freeze() self.statictext.SetLabel(self.wraplabel) self.statictext.Wrap(self.GetSize().width) self.Thaw() def DoGetBestSize(self): self.wrap() #print self.statictext.GetSize() self.SetSize(self.statictext.GetSize()) return self.GetSize() class TestPanel(wx.Panel): def __init__(self, *args, **kwargs): # Init the base class wx.Panel.__init__(self, *args, **kwargs) self.createControls() def createControls(self): # --- Panel2 ------------------------------------------------------------- self.Panel2 = wx.Panel(self, -1) msg1 = 'Below is a List of Files to be Processed' staticBox = wx.StaticBox(self.Panel2, label=msg1) Panel2_box1_v1 = wx.StaticBoxSizer(staticBox, wx.VERTICAL) Panel2_box2_h1 = wx.BoxSizer(wx.HORIZONTAL) Panel2_box3_v1 = wx.BoxSizer(wx.VERTICAL) self.wxL_Inputs = wx.ListBox(self.Panel2, wx.ID_ANY, style=wx.LB_EXTENDED) sz = dict(size=(120,-1)) wxB_AddFile = wx.Button(self.Panel2, label='Add File', **sz) wxB_DeleteFile = wx.Button(self.Panel2, label='Delete Selected', **sz) wxB_ClearFiles = wx.Button(self.Panel2, label='Clear All', **sz) Panel2_box3_v1.Add(wxB_AddFile, 0, wx.TOP, 0) Panel2_box3_v1.Add(wxB_DeleteFile, 0, wx.TOP, 0) Panel2_box3_v1.Add(wxB_ClearFiles, 0, wx.TOP, 0) Panel2_box2_h1.Add(self.wxL_Inputs, 1, wx.ALL|wx.EXPAND, 2) Panel2_box2_h1.Add(Panel2_box3_v1, 0, wx.ALL|wx.EXPAND, 2) msg = 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' msg += 'This is a long line of text used to test the autowrapping ' msg += 'static text message. ' staticMsg = StaticWrapText(self.Panel2, label=msg) Panel2_box1_v1.Add(staticMsg, 0, wx.ALL|wx.EXPAND, 2) Panel2_box1_v1.Add(Panel2_box2_h1, 1, wx.ALL|wx.EXPAND, 0) self.Panel2.SetSizer(Panel2_box1_v1) # --- Combine Everything ------------------------------------------------- final_vbox = wx.BoxSizer(wx.VERTICAL) final_vbox.Add(self.Panel2, 1, wx.ALL|wx.EXPAND, 2) self.SetSizerAndFit(final_vbox) class TestFrame(wx.Frame): def __init__(self, *args, **kwargs): # Init the base class wx.Frame.__init__(self, *args, **kwargs) panel = TestPanel(self) self.SetClientSize(wx.Size(500,500)) self.Center() class wxFileCleanupApp(wx.App): def __init__(self, *args, **kwargs): # Init the base class wx.App.__init__(self, *args, **kwargs) def OnInit(self): # Create the frame, center it, and show it frame = TestFrame(None, title='Test Frame') frame.Show() return True if __name__ == '__main__': app = wxFileCleanupApp() app.MainLoop() EDIT: See my post below for a solution that works!

  Read the article

• Geolocation through Android's GPS Provider on a website?

  - by Corey Ogburn

  I'm trying to get the geolocation of the mobile device in a regular website, not a webview of an application or anything native like that. I'm getting a location, but it's highly inaccurate, the accuracy comes back as 3230 or some other outrageous number. I'm assuming that's in meters, either way it's not nearly accurate enough. By comparison, the same webpage on a laptop gets an accuracy of 30-40. My first thought was that it was using the Network Provider instead of the GPS Provider, telling me where I am based on tower location and reach. A little research later I found enableHighAccuracy and set it true in the options that I pass. After including that, I still notice no difference. Here's the test page's HTML/javascript: <html> <head> <script type="text/javascript" src="http://ecn.dev.virtualearth.net/mapcontrol/mapcontrol.ashx?v=7.0"></script> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.3/jquery.min.js"></script> <script type="text/javascript"> function OnLoad() { $("#Status").text("Init"); if (navigator.geolocation) { $("#Status").text("Supports Geolocation"); navigator.geolocation.getCurrentPosition(HandleLocation, LocationError, { enableHighAccuracy: true }); $("#Status").text("Sent position request..."); } else { $("#Status").text("Doesn't support geolocation"); } } function HandleLocation(position) { $("#Status").text("Received response:"); $("#Position").text("(" + position.coords.latitude + ", " + position.coords.longitude + ") accuracy: " + position.coords.accuracy); var loc = new Microsoft.Maps.Location(position.coords.latitude, position.coords.longitude); GetMap(loc); } function LocationError(error) { switch(error.code) { case error.PERMISSION_DENIED: alert("Location not provided"); break; case error.POSITION_UNAVAILABLE: alert("Current location not available"); break; case error.TIMEOUT: alert("Timeout"); break; default: alert("unknown error"); break; } } function GetMap(loc) { var map = new Microsoft.Maps.Map(document.getElementById("mapDiv"), {credentials: "Aj59meaCR1e7rNgkfQy7j08Pd3mzfP1r04hGesGmLe2a3ZwZ3iGecwPX2SNPWq5a", center: loc, mapTypeId: Microsoft.Maps.MapTypeId.road, zoom: 15}); } </script> </head> <body onload="javascript:OnLoad()"> <div id="Status"></div> <div id="Position"></div><br/> <div id='mapDiv' style="position:relative; width:600px; height:400px;"></div> </body> </html> I'm testing this on a rooted MyTouch 3G running Cyanogen 6.1 stable, Android 2.2 and GPS is enabled. In case rooting was a problem, I have also had various friends and coworkers try the webpage on their non-rooted 2.0+ Android devices. Each phone had various effects on the accuracy, but none were better than 1000, I attribute this to the different carriers. I have not (but eventually will) tested with iPhone or other location-aware cell phones.

  Read the article

• Removing google mail markers with jquery after getting them from xml

  - by sebastian

  Hi there, I'm trying to create a page that contains a google map. The map is filled with markers from an xml file. I just can't figure out how to remove "old" markers, that don't match the latest user input. At the moment my js stops after the very first xml item. The clearList.push(marker); is supposed to put the generated marker away for later usage. When the user hits the search button I want all markers to be gone and use clearMarkers();. Maybe someone here can help Sebastian Here is my JavaScript: $(document).ready(function() { $("#map").css({height: 650}); var clearList = []; var myLatLng = new google.maps.LatLng(52.518143, 13.372879); MYMAP.init('#map', myLatLng, 11); $("#showmarkers").click(function(e){ clearMarkers(); MYMAP.placeMarkers('markers.xml'); }); }); function clearMarkers() { $(clearList).each(function () { this.setmap(null); }); clearList = []; } var MYMAP = { map: null, bounds: null } MYMAP.init = function(selector, latLng, zoom) { var myOptions = { zoom:zoom, center: latLng, mapTypeId: google.maps.MapTypeId.HYBRID } this.map = new google.maps.Map($(selector)[0], myOptions); this.bounds = new google.maps.LatLngBounds(); } MYMAP.placeMarkers = function(filename) { $.get(filename, function(xml){ $(xml).find("marker").each(function(){ // read values from xml for searching var platzart = $(this).find('platzart').text(); var ort = $(this).find('ort').text(); var open = $(this).find('open').text(); if (platzart =="Kunstrasen" && $('#kunstrasen').attr('checked') || platzart =="Rasen" && $('#rasen').attr('checked') || platzart =="Tartan" && $('#tartan').attr('checked') || platzart =="Boltzplatz" && $('#boltzplatz').attr('checked') ){ // read values from xml for additional info var name = $(this).find('name').text(); var plz = $(this).find('plz').text(); var note = $(this).find('note').text(); var adress = $(this).find('adress').text(); // create a new LatLng point for the marker var lat = $(this).find('lat').text(); var lng = $(this).find('lng').text(); var point = new google.maps.LatLng(parseFloat(lat),parseFloat(lng)); // extend the bounds to include the new point MYMAP.bounds.extend(point); // create new marker var marker = new google.maps.Marker({ position: point, map: MYMAP.map }); clearList.push(marker); // add onclick overlay var infoWindow = new google.maps.InfoWindow(); var html='<strong>'+name+'</strong.><br />'+platzart; google.maps.event.addListener(marker, 'click', function() { infoWindow.setContent(html); infoWindow.open(MYMAP.map, marker); }); } MYMAP.map.fitBounds(MYMAP.bounds); }); }); } Thanks in advance

  Read the article

• swap a div to an embed form when user tweets using the @anywhere function box

  - by Jeff

  I'm using the @anywhere twitter function on the front page of my site (vocabbomb.com) and right now it works great to allow users to tweet straight away. Problem is, when they click tweet, it just reloads the twitter box, empty. I want it to load something new, like a "thank you, now fill in this email form" and show a mailchimp form. Ok so this is the @anywhere code currently working fine: <div id="tbox"></div> <script type="text/javascript"> twttr.anywhere(function (T) { T("#tbox").tweetBox({ height: 100, width: 400, defaultContent: " #vocabbomb", label: "Use the word foo in a tweet:", }); }); </script> So this is fine, and when the user writes a tweet, it just re-displays the twitter box. I understand there is a function that lets you specify stuff after the tweet is made: (example from http://dev.twitter.com/pages/anywhere_tweetbox) <div id="example-ontweet"></div> <script type="text/javascript"> twttr.anywhere(function (T) { T("#example-ontweet").tweetBox({ onTweet : function(plaintext, html) { console.log(plaintext); alert(html); } }); }); </script> Is this the best way to attempt this? Or do I need a function or something that changes what's in the div to something else? I want the mailchimp email form to show up after the tweet. It includes a ton of script and tags and starts like this: <!-- Begin MailChimp Signup Form --> <!--[if IE]> <style type="text/css" media="screen"> #mc_embed_signup fieldset {position: relative;} #mc_embed_signup legend {position: absolute; top: -1em; left: .2em;} </style> <![endif]--> <!--[if IE 7]> <style type="text/css" media="screen"> .mc-field-group {overflow:visible;} </style> <![endif]--> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.2.6/jquery.min.js"></script> <script type="text/javascript" src="http://downloads.mailchimp.com/js/jquery.validate.js"></script> <script type="text/javascript" src="http://downloads.mailchimp.com/js/jquery.form.js"></script> <div id="mc_embed_signup"> <form action="http://faresharenyc.us1.list-manage.com/subscribe/post?u=106b58b4751a007d826715754&amp;id=2fe6ba4e6a" method="post" id="mc-embedded-subscribe-form" name="mc-embedded-subscribe-form" class="validate" target="_blank" style="font: normal 100% Arial, sans-serif;font-size: 10px;"> ... So my attempt to just require it inside the function didn't work at all: <div id="tbox"></div> <script type="text/javascript"> twttr.anywhere(function (T) { T("#tbox").tweetBox({ height: 100, width: 400, defaultContent: " #vocabbomb", label: "Use the word foo in a tweet:", onTweet: function(plain, html){ <?php require_once('mailchimp.html'); ?> } }); }); </script> Nettuts had a brief discussion here: http://net.tutsplus.com/tutorials/javascript-ajax/using-twitters-anywhere-service-in-6-steps/ I am seeing now that the 'onTweet' function simply adds some text above the twitter box, but doesn't actually replace the entire twitter box. How do I do that? Is it possible? Thanks!

  Read the article

• when importing multiple javascript files the javascript seems to break

  - by waywardmd

  I am trying to incorperate several different js files into one page. For some reason though whichever ones are first, seem to break. Here is the code I am using: <link href="inc/css/style.css" rel="stylesheet" type="text/css" /> <link rel="stylesheet" href="inc/css/lightbox.css" type="text/css" media="screen" /> <script type="text/javascript" src="inc/js/prototype.js"></script> <script type="text/javascript" src="inc/js/scriptaculous.js?load=effects"></script> <script type="text/javascript" src="inc/js/lightbox.js"></script> <script type="text/javascript"> <!-- function MM_swapImgRestore() { //v3.0 var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc; } function MM_preloadImages() { //v3.0 var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array(); var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++) if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}} } function MM_findObj(n, d) { //v4.01 var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) { d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);} if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n]; for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document); if(!x && d.getElementById) x=d.getElementById(n); return x; } function MM_swapImage() { //v3.0 var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3) if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];} } </script> <script type="text/javascript" src="inc/js/jquery-1.3.2.min.js"></script> <script type="text/javascript" src="inc/js/jquery.slideshow.lite-0.4.js"></script> <script type="text/javascript" charset="utf-8"> $(document).ready(function(){ $("#slideshow2").slideshow({ pauseSeconds: 6, height: 196 }); }); </script> The first files are used for a lightbox and other functions and the second ones are used for a slideshow. Depending on the order one or the other will work, but never both at the same time. What am I doing wrong? Any help is greatly appreciated, thanks.

  Read the article

• input field placeholder in jQuery

  - by Hristo

  I'm trying to create a Login page, not worrying about actually logging in yet, but I'm trying to achieve the effect where there is some faded text inside the input field and when you click on it, the text disappears or if you click away the text reappears. I have this working for my "Username" input field, but the "Password" field is giving me problems because I can't just do $("#password").attr("type","password"). Here's my code: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <title>Insert title here</title> <!-- Links --> <link rel="stylesheet" type="text/css" href="style.css" /> <!-- Scripts --> <script type="text/javascript" src="jQuery.js"></script> <script> // document script $(document).ready(function(){ // login box event handler $('#login').click(function(){ $('.loginBox').animate({ height: '150px' }, '1000' ); $('#username').show(); // add pw placeholder field $('#password').after('<input type="text" id="placeHolder" value="Password" class="placeHolder" />'); $('#password').hide(); }); // username field focus and blur event handlers $('#username').focus(function() { if($(this).hasClass('placeHolder')){ $(this).val(''); $(this).removeClass('placeHolder'); } }); $('#username').blur(function() { if($(this).val() == '') { $(this).val('Username'); $(this).addClass('placeHolder'); } }); // password field focus and blur event handlers $('#placeHolder').focus(function() { $('#placeHolder').hide(); $('#password').show(); $('#password').focus(); }); $('#password').blur(function() { if($('#password').val() == '') { $('#placeHolder').show(); $('#password').hide(); } }); }); </script> </head> <body> <div id="loginBox" class="loginBox"> <a id="login">Proceed to Login</a><br /> <div id="loginForm"> <form> <input type="text" id="username" class="placeHolder" value="Username" /> <input type="password" id="password" class="placeHolder" value="" /> </form> </div> </div> </body> </html> Right now, I can click on the password input box and type in it, but the text is not disappearing and the "type" doesn't get set to "password"... the new input field I create isn't being hidden, it just stays visible, and I'm not sure where the problem is. Any ideas? Thanks, Hristo

  Read the article

• How to filter using a dropdown in Knockout

  - by user517406

  I have just started using Knockout and I want to filter my data that I am displaying in my UI by selecting an item from a dropdown. I have got so far, but I cannot get the selected value from my dropdown yet, and then after that I need to actually filter the data displayed based upon that value. Here is my code so far : @model Models.Fixture @{ ViewBag.Title = "Fixtures"; Layout = "~/Areas/Development/Views/Shared/_Layout.cshtml"; } @Scripts.Render("~/bundles/jqueryval") <script type="text/javascript" src="@Url.Content("~/Scripts/knockout-2.1.0.js")"></script> <script type="text/javascript"> function FixturesViewModel() { var self = this; var baseUri = '@ViewBag.ApiUrl'; self.fixtures = ko.observableArray(); self.teams = ko.observableArray(); self.update = function (fixture) { $.ajax({ type: "PUT", url: baseUri + '/' + fixture.Id, data: fixture }); }; self.sortByAwayTeamScore = function () { this.fixtures.sort(function(a, b) { return a.AwayTeamScore < b.AwayTeamScore ? -1 : 1; }); }; self.select = function (team) { }; $.getJSON("/api/fixture", self.fixtures); $.getJSON("/api/team", self.teams); } $(document).ready(function () { ko.applyBindings(new FixturesViewModel()); }); </script> <div class="content"> <div> <table><tr><td><select data-bind="options: teams, optionsText: 'TeamName', optionsCaption: 'Select...', optionsValue: 'TeamId', click: $root.select"> </select></td></tr></table> <table class="details ui-widget-content"> <thead> <tr><td>FixtureId</td><td>Season</td><td>Week</td><td>AwayTeam</td><td><a id="header" data-bind='click: sortByAwayTeamScore'>AwayTeamScore</a></td><td>HomeTeam</td><td>HomeTeamScore</td></tr> </thead> <tbody data-bind="foreach: fixtures"> <tr> <td><span data-bind="text: $data.Id"></span></td> <td><span data-bind="text: $data.Season"></span></td> <td><span data-bind="text: $data.Week"></span></td> <td><span data-bind="text: $data.AwayTeamName"></span></td> <td><input type="text" data-bind="value: $data.AwayTeamScore"/></td> <td><span data-bind="text: $data.HomeTeamName"></span></td> <td><input type="text" data-bind="value: $data.HomeTeamScore"/></td> <td><input type="button" value="Update" data-bind="click: $root.update"/></td> </tr> </tbody> </table> </div> </div> Can anybody please advise on this?

  Read the article

• model binding of non-sequential arrays

  - by user281180

  I am having a table in which i`m dynamically creating and deleting rows. How can I change the code such that the rows be added and deleted and the model info property filled accordingly. Bearing in mind that the rows can be dynamically created and deleted, I may have Info[0], Inf0[3], info[4]... My objective is to be able to bind the array even if it`s not in sequence. Model public class Person { public int[] Size { get; set; } public string[] Name { get; set; } public Info[]info { get; set; } } public class Info { public string Address { get; set; } public string Tel { get; set; } View <script type="text/javascript" language="javascript"> $(function () { var count = 1; $('#AddSize').live('click', function () { $("#divSize").append('</br><input type="text" id="Size" name="Size" value=""/><input type = "button" id="AddSize" value="Add"/>'); }); $('#AddName').live('click', function () { $("#divName").append('</br><input type="text" id="Name" name="Name" value=""/><input type = "button" id="AddName" value="Add"/>'); }); $('#AddRow').live('click', function () { $('#details').append('<tr><td>Address</td><td> <input type="text" name="Info[' + count + '].Address"/></td><td>Tel</td><td><input type="text" name="Info[' + count++ + '].Tel"/></td> <td><input type="button" id="AddRow" value="Add"/> </td></tr>'); }); }); </script> </head> <body> <form id="closeForm" action="<%=Url.Action("Create",new{Action="Create"}) %>" method="post" enctype="multipart/form-data"> <div id="divSize"> <input type="text" name="Size" value=""/> <input type="button" value="Add" id="AddSize" /> </div> <div id="divName"> <input type="text" name="Name" value=""/> <input type="button" value="Add" id="AddName" /> </div> <div id="Tab"> <table id="details"> <tr><td>Address</td><td> <input type="text" name="Info[0].Address"/></td><td>Tel</td><td><input type="text" name="Info[0].Tel"/></td> <td><input type="button" id="AddRow" value="Add"/> </td></tr> </table> </div> <input type="submit" value="Submit" /> </form> </body> } Controller public ActionResult Create(Person person) { return new EmptyResult(); }

  Read the article

• Uploading and Importing CSV file to SQL Server in ASP.NET WebForms

  - by Vincent Maverick Durano

  Few weeks ago I was working with a small internal project  that involves importing CSV file to Sql Server database and thought I'd share the simple implementation that I did on the project. In this post I will demonstrate how to upload and import CSV file to SQL Server database. As some may have already know, importing CSV file to SQL Server is easy and simple but difficulties arise when the CSV file contains, many columns with different data types. Basically, the provider cannot differentiate data types between the columns or the rows, blindly it will consider them as a data type based on first few rows and leave all the data which does not match the data type. To overcome this problem, I used schema.ini file to define the data type of the CSV file and allow the provider to read that and recognize the exact data types of each column. Now what is schema.ini? Taken from the documentation: The Schema.ini is a information file, used to define the data structure and format of each column that contains data in the CSV file. If schema.ini file exists in the directory, Microsoft.Jet.OLEDB provider automatically reads it and recognizes the data type information of each column in the CSV file. Thus, the provider intelligently avoids the misinterpretation of data types before inserting the data into the database. For more information see: http://msdn.microsoft.com/en-us/library/ms709353%28VS.85%29.aspx Points to remember before creating schema.ini:   1. The schema information file, must always named as 'schema.ini'.   2. The schema.ini file must be kept in the same directory where the CSV file exists.   3. The schema.ini file must be created before reading the CSV file.   4. The first line of the schema.ini, must the name of the CSV file, followed by the properties of the CSV file, and then the properties of the each column in the CSV file. Here's an example of how the schema looked like: [Employee.csv] ColNameHeader=False Format=CSVDelimited DateTimeFormat=dd-MMM-yyyy Col1=EmployeeID Long Col2=EmployeeFirstName Text Width 100 Col3=EmployeeLastName Text Width 50 Col4=EmployeeEmailAddress Text Width 50 To get started lets's go a head and create a simple blank database. Just for the purpose of this demo I created a database called TestDB. After creating the database then lets go a head and fire up Visual Studio and then create a new WebApplication project. Under the root application create a folder called UploadedCSVFiles and then place the schema.ini on that folder. The uploaded CSV files will be stored in this folder after the user imports the file. Now add a WebForm in the project and set up the HTML mark up and add one (1) FileUpload control one(1)Button and three (3) Label controls. After that we can now proceed with the codes for uploading and importing the CSV file to SQL Server database. Here are the full code blocks below: 1: using System; 2: using System.Data; 3: using System.Data.SqlClient; 4: using System.Data.OleDb; 5: using System.IO; 6: using System.Text; 7:   8: namespace WebApplication1 9: { 10: public partial class CSVToSQLImporting : System.Web.UI.Page 11: { 12: private string GetConnectionString() 13: { 14: return System.Configuration.ConfigurationManager.ConnectionStrings["DBConnectionString"].ConnectionString; 15: } 16: private void CreateDatabaseTable(DataTable dt, string tableName) 17: { 18:   19: string sqlQuery = string.Empty; 20: string sqlDBType = string.Empty; 21: string dataType = string.Empty; 22: int maxLength = 0; 23: StringBuilder sb = new StringBuilder(); 24:   25: sb.AppendFormat(string.Format("CREATE TABLE {0} (", tableName)); 26:   27: for (int i = 0; i < dt.Columns.Count; i++) 28: { 29: dataType = dt.Columns[i].DataType.ToString(); 30: if (dataType == "System.Int32") 31: { 32: sqlDBType = "INT"; 33: } 34: else if (dataType == "System.String") 35: { 36: sqlDBType = "NVARCHAR"; 37: maxLength = dt.Columns[i].MaxLength; 38: } 39:   40: if (maxLength > 0) 41: { 42: sb.AppendFormat(string.Format(" {0} {1} ({2}), ", dt.Columns[i].ColumnName, sqlDBType, maxLength)); 43: } 44: else 45: { 46: sb.AppendFormat(string.Format(" {0} {1}, ", dt.Columns[i].ColumnName, sqlDBType)); 47: } 48: } 49:   50: sqlQuery = sb.ToString(); 51: sqlQuery = sqlQuery.Trim().TrimEnd(','); 52: sqlQuery = sqlQuery + " )"; 53:   54: using (SqlConnection sqlConn = new SqlConnection(GetConnectionString())) 55: { 56: sqlConn.Open(); 57: SqlCommand sqlCmd = new SqlCommand(sqlQuery, sqlConn); 58: sqlCmd.ExecuteNonQuery(); 59: sqlConn.Close(); 60: } 61:   62: } 63: private void LoadDataToDatabase(string tableName, string fileFullPath, string delimeter) 64: { 65: string sqlQuery = string.Empty; 66: StringBuilder sb = new StringBuilder(); 67:   68: sb.AppendFormat(string.Format("BULK INSERT {0} ", tableName)); 69: sb.AppendFormat(string.Format(" FROM '{0}'", fileFullPath)); 70: sb.AppendFormat(string.Format(" WITH ( FIELDTERMINATOR = '{0}' , ROWTERMINATOR = '\n' )", delimeter)); 71:   72: sqlQuery = sb.ToString(); 73:   74: using (SqlConnection sqlConn = new SqlConnection(GetConnectionString())) 75: { 76: sqlConn.Open(); 77: SqlCommand sqlCmd = new SqlCommand(sqlQuery, sqlConn); 78: sqlCmd.ExecuteNonQuery(); 79: sqlConn.Close(); 80: } 81: } 82: protected void Page_Load(object sender, EventArgs e) 83: { 84:   85: } 86: protected void BTNImport_Click(object sender, EventArgs e) 87: { 88: if (FileUpload1.HasFile) 89: { 90: FileInfo fileInfo = new FileInfo(FileUpload1.PostedFile.FileName); 91: if (fileInfo.Name.Contains(".csv")) 92: { 93:   94: string fileName = fileInfo.Name.Replace(".csv", "").ToString(); 95: string csvFilePath = Server.MapPath("UploadedCSVFiles") + "\\" + fileInfo.Name; 96:   97: //Save the CSV file in the Server inside 'MyCSVFolder' 98: FileUpload1.SaveAs(csvFilePath); 99:   100: //Fetch the location of CSV file 101: string filePath = Server.MapPath("UploadedCSVFiles") + "\\"; 102: string strSql = "SELECT * FROM [" + fileInfo.Name + "]"; 103: string strCSVConnString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + filePath + ";" + "Extended Properties='text;HDR=YES;'"; 104:   105: // load the data from CSV to DataTable 106:   107: OleDbDataAdapter adapter = new OleDbDataAdapter(strSql, strCSVConnString); 108: DataTable dtCSV = new DataTable(); 109: DataTable dtSchema = new DataTable(); 110:   111: adapter.FillSchema(dtCSV, SchemaType.Mapped); 112: adapter.Fill(dtCSV); 113:   114: if (dtCSV.Rows.Count > 0) 115: { 116: CreateDatabaseTable(dtCSV, fileName); 117: Label2.Text = string.Format("The table ({0}) has been successfully created to the database.", fileName); 118:   119: string fileFullPath = filePath + fileInfo.Name; 120: LoadDataToDatabase(fileName, fileFullPath, ","); 121:   122: Label1.Text = string.Format("({0}) records has been loaded to the table {1}.", dtCSV.Rows.Count, fileName); 123: } 124: else 125: { 126: LBLError.Text = "File is empty."; 127: } 128: } 129: else 130: { 131: LBLError.Text = "Unable to recognize file."; 132: } 133:   134: } 135: } 136: } 137: } The code above consists of three (3) private methods which are the GetConnectionString(), CreateDatabaseTable() and LoadDataToDatabase(). The GetConnectionString() is a method that returns a string. This method basically gets the connection string that is configured in the web.config file. The CreateDatabaseTable() is method that accepts two (2) parameters which are the DataTable and the filename. As the method name already suggested, this method automatically create a Table to the database based on the source DataTable and the filename of the CSV file. The LoadDataToDatabase() is a method that accepts three (3) parameters which are the tableName, fileFullPath and delimeter value. This method is where the actual saving or importing of data from CSV to SQL server happend. The codes at BTNImport_Click event handles the uploading of CSV file to the specified location and at the same time this is where the CreateDatabaseTable() and LoadDataToDatabase() are being called. If you notice I also added some basic trappings and validations within that event. Now to test the importing utility then let's create a simple data in a CSV format. Just for the simplicity of this demo let's create a CSV file and name it as "Employee" and add some data on it. Here's an example below: 1,VMS,Durano,[email protected] 2,Jennifer,Cortes,[email protected] 3,Xhaiden,Durano,[email protected] 4,Angel,Santos,[email protected] 5,Kier,Binks,[email protected] 6,Erika,Bird,[email protected] 7,Vianne,Durano,[email protected] 8,Lilibeth,Tree,[email protected] 9,Bon,Bolger,[email protected] 10,Brian,Jones,[email protected] Now save the newly created CSV file in some location in your hard drive. Okay let's run the application and browse the CSV file that we have just created. Take a look at the sample screen shots below: After browsing the CSV file. After clicking the Import Button Now if we look at the database that we have created earlier you'll notice that the Employee table is created with the imported data on it. See below screen shot.   That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,CSV,SQL,C#,ADO.NET

  Read the article

• Observable Collections

  - by SGWellens

  I didn't think it was possible, but .NET surprised me yet again with a cool feature I never knew existed: The ObservableCollection. This became available in .NET 3.0. In essence, an ObservableCollection is a collection with an event you can connect to. The event fires when the collection changes. As usual, working with the .NET classes is so ridiculously easy, it feels like cheating. The following is small test program to illustrate how the ObservableCollection works. To start, create an ObservableCollection and then store it in the Session object so it will persist between page post backs. I also added the code to pull it out of Session state when there is a page post back:   public partial class _Default : System.Web.UI.Page{    public ObservableCollection<int> MyInts;     // ---- Page_Load ------------------------------     protected void Page_Load(object sender, EventArgs e)    {        if (IsPostBack == false)        {            MyInts = new ObservableCollection<int>();            MyInts.CollectionChanged += CollectionChangedHandler;             Session["MyInts"] = MyInts;  // store for use between postbacks        }        else        {            MyInts = Session["MyInts"] as ObservableCollection<int>;        }    } Here's the event handler I hooked up to the ObservableCollection, it writes status strings to a ListBox. Note: The event handler fires in a different thread than the IIS process thread.     // ---- CollectionChangedHandler -----------------------------------    //    // Something changed in the Observable collection     public void CollectionChangedHandler(object sender, NotifyCollectionChangedEventArgs e)    {        // need to dig around to get the current page and control to write to:        // (because this is in a separate thread)        Page CurrentPage = System.Web.HttpContext.Current.Handler as Page;        ListBox LB = CurrentPage.FindControl("ListBoxHistory") as ListBox;         switch (e.Action)        {            case NotifyCollectionChangedAction.Add:                LB.Items.Add("Add: " + e.NewItems[0]);                               break;             case NotifyCollectionChangedAction.Remove:                LB.Items.Add("Remove: " + e.OldItems[0]);                break;             case NotifyCollectionChangedAction.Reset:                LB.Items.Add("Reset: ");                break;             default:                LB.Items.Add(e.Action.ToString());                break;                     }    }  Next, add some buttons and code to exercise the ObservableCollection:     <br />    <asp:Button ID="ButtonAdd" runat="server" Text="Add" OnClick="ButtonAdd_Click" />    <asp:Button ID="ButtonRemove" runat="server" Text="Remove" OnClick="ButtonRemove_Click" />    <asp:Button ID="ButtonReset" runat="server" Text="Reset" OnClick="ButtonReset_Click" />    <asp:Button ID="ButtonList" runat="server" Text="List" OnClick="ButtonList_Click" />    <br />    <asp:TextBox ID="TextBoxInt" runat="server" Width="51px"></asp:TextBox>    <br />    <asp:ListBox ID="ListBoxHistory" runat="server" Height="255px" Width="195px">    </asp:ListBox>    // ---- Add Button --------------------------------------     protected void ButtonAdd_Click(object sender, EventArgs e)    {        int Temp;        if (int.TryParse(TextBoxInt.Text, out Temp) == true)            MyInts.Add(Temp);    }     // ---- Remove Button --------------------------------------     protected void ButtonRemove_Click(object sender, EventArgs e)    {        int Temp;        if (int.TryParse(TextBoxInt.Text, out Temp) == true)            MyInts.Remove(Temp);    }     // ---- Button Reset -----------------------------------     protected void ButtonReset_Click(object sender, EventArgs e)    {        MyInts.Clear();    }     // ---- Button List --------------------------------------     protected void ButtonList_Click(object sender, EventArgs e)    {        ListBoxHistory.Items.Add("MyInts:");        foreach (int i in MyInts)        {            // a bit of tweaking to get the text to be indented            ListItem LI = new ListItem("&nbsp;&nbsp;" + i.ToString());            LI.Text = Server.HtmlDecode(LI.Text);            ListBoxHistory.Items.Add(LI);        }    } Here's what it looks like after entering some numbers and clicking some buttons: An interesting note is that I had to use: System.Web.HttpContext.Current.Response to write to a control on the page. As mentioned earlier, this implies that the notification event is in a thread separate from the IIS thread. Another interesting note: From the online help: Any public static (Shared in Visual Basic) members of this type are thread safe. Any instance members are not guaranteed to be thread safe What does that mean to Asp.Net developers? If you are going to share an ObservableCollection among different sessions, you'd better make it a static object. I hope someone finds this useful. Steve Wellens

  Read the article

• Postfix log.... spam attempt?

  - by luri

  I have some weird entries in my mail.log. What I'd like to ask is if postfix is avoiding correctly (according with the main.cf attached below) what seems to be relay attempts, presumably for spamming, or if I can enhance it's security somehow. Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: connect from catv-80-99-46-143.catv.broadband.hu[80.99.46.143] Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: warning: non-SMTP command from catv-80-99-46-143.catv.broadband.hu[80.99.46.143]: GET / HTTP/1.1 Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: disconnect from catv-80-99-46-143.catv.broadband.hu[80.99.46.143] Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max connection rate 1/60s for (smtp:80.99.46.143) at Feb 2 11:53:25 Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max connection count 1 for (smtp:80.99.46.143) at Feb 2 11:53:25 Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max cache size 1 at Feb 2 11:53:25 Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: connect from vs148181.vserver.de[62.75.148.181] Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: warning: non-SMTP command from vs148181.vserver.de[62.75.148.181]: GET / HTTP/1.1 Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: disconnect from vs148181.vserver.de[62.75.148.181] Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max connection rate 1/60s for (smtp:62.75.148.181) at Feb 2 12:09:19 Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max connection count 1 for (smtp:62.75.148.181) at Feb 2 12:09:19 Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max cache size 1 at Feb 2 12:09:19 Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: connect from unknown[202.46.129.123] Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: warning: non-SMTP command from unknown[202.46.129.123]: GET / HTTP/1.1 Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: disconnect from unknown[202.46.129.123] Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max connection rate 1/60s for (smtp:202.46.129.123) at Feb 2 14:17:02 Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max connection count 1 for (smtp:202.46.129.123) at Feb 2 14:17:02 Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max cache size 1 at Feb 2 14:17:02 Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: warning: 95.110.224.230: hostname host230-224-110-95.serverdedicati.aruba.it verification failed: Name or service not known Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: connect from unknown[95.110.224.230] Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: lost connection after CONNECT from unknown[95.110.224.230] Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: disconnect from unknown[95.110.224.230] Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max connection rate 1/60s for (smtp:95.110.224.230) at Feb 2 20:57:33 Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max connection count 1 for (smtp:95.110.224.230) at Feb 2 20:57:33 Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max cache size 1 at Feb 2 20:57:33 Feb 2 21:13:44 MYSERVER pop3d: Connection, ip=[::ffff:219.94.190.222] Feb 2 21:13:44 MYSERVER pop3d: LOGIN FAILED, user=admin, ip=[::ffff:219.94.190.222] Feb 2 21:13:50 MYSERVER pop3d: LOGIN FAILED, user=test, ip=[::ffff:219.94.190.222] Feb 2 21:13:56 MYSERVER pop3d: LOGIN FAILED, user=danny, ip=[::ffff:219.94.190.222] Feb 2 21:14:01 MYSERVER pop3d: LOGIN FAILED, user=sharon, ip=[::ffff:219.94.190.222] Feb 2 21:14:07 MYSERVER pop3d: LOGIN FAILED, user=aron, ip=[::ffff:219.94.190.222] Feb 2 21:14:12 MYSERVER pop3d: LOGIN FAILED, user=alex, ip=[::ffff:219.94.190.222] Feb 2 21:14:18 MYSERVER pop3d: LOGIN FAILED, user=brett, ip=[::ffff:219.94.190.222] Feb 2 21:14:24 MYSERVER pop3d: LOGIN FAILED, user=mike, ip=[::ffff:219.94.190.222] Feb 2 21:14:29 MYSERVER pop3d: LOGIN FAILED, user=alan, ip=[::ffff:219.94.190.222] Feb 2 21:14:35 MYSERVER pop3d: LOGIN FAILED, user=info, ip=[::ffff:219.94.190.222] Feb 2 21:14:41 MYSERVER pop3d: LOGIN FAILED, user=shop, ip=[::ffff:219.94.190.222] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: warning: 71.6.142.196: hostname db4142196.aspadmin.net verification failed: Name or service not known Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: connect from unknown[71.6.142.196] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: lost connection after CONNECT from unknown[71.6.142.196] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: disconnect from unknown[71.6.142.196] Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max connection rate 1/60s for (smtp:71.6.142.196) at Feb 3 06:49:29 Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max connection count 1 for (smtp:71.6.142.196) at Feb 3 06:49:29 Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max cache size 1 at Feb 3 06:49:29 I have Postfix 2.7.1-1 running on Ubuntu 10.10. This is my (modified por privacy) main.cf: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key myhostname = mymailserver.org alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mymailserver.org, MYSERVER, localhost relayhost = mynetworks = 127.0.0.0/8, 192.168.1.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all home_mailbox = Maildir/ smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination mailbox_command = smtpd_sasl_local_domain = smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_tls_security_level = may smtpd_tls_auth_only = no smtp_tls_note_starttls_offer = yes smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom smtp_tls_security_level = may

  Read the article

• OpenGL/GLSL: Render to cube map?

  - by BobDole

  I'm trying to figure out how to render my scene to a cube map. I've been stuck on this for a bit and figured I would ask you guys for some help. I'm new to OpenGL and this is the first time I'm using a FBO. I currently have a working example of using a cubemap bmp file, and the samplerCube sample type in the fragment shader is attached to GL_TEXTURE1. I'm not changing the shader code at all. I'm just changing the fact that I wont be calling the function that was loading the cubemap bmp file and trying to use the below code to render to a cubemap. You can see below that I'm also attaching the texture again to GL_TEXTURE1. This is so when I set the uniform: glUniform1i(getUniLoc(myProg, "Cubemap"), 1); it can access it in my fragment shader via uniform samplerCube Cubemap. I'm calling the below function like so: cubeMapTexture = renderToCubeMap(150, GL_RGBA8, GL_RGBA, GL_UNSIGNED_BYTE); Now, I realize in the draw loop below that I'm not changing the view direction to look down the +x, -x, +y, -y, +z, -z axis. I really was just wanting to see something working first before implemented that. I figured I should at least see something on my object the way the code is now. I'm not seeing anything, just straight black. I've made my background white still the object is black. I've removed lighting, and coloring to just sample the cubemap texture and still black. I'm thinking the problem might be the format types when setting my texture which is GL_RGB8, GL_RGBA but I've also tried: GL_RGBA, GL_RGBA GL_RGB, GL_RGB I thought this would be standard since we are rendering to a texture attached to a framebuffer, but I've seen different examples that use different enum values. I've also tried binding the cube map texture in every draw call that I'm wanting to use the cube map: glBindTexture(GL_TEXTURE_CUBE_MAP, cubeMapTexture); Also, I'm not creating a depth buffer for the FBO which I saw in most examples, because I'm only wanting the color buffer for my cube map. I actually added one to see if that was the problem and still got the same results. I could of fudged that up when I tried. Any help that can point me in the right direction would be appreciated. GLuint renderToCubeMap(int size, GLenum InternalFormat, GLenum Format, GLenum Type) { // color cube map GLuint textureObject; int face; GLenum status; //glEnable(GL_TEXTURE_2D); glActiveTexture(GL_TEXTURE1); glGenTextures(1, &textureObject); glBindTexture(GL_TEXTURE_CUBE_MAP, textureObject); glTexParameterf(GL_TEXTURE_CUBE_MAP, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameterf(GL_TEXTURE_CUBE_MAP, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameterf(GL_TEXTURE_CUBE_MAP, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_CUBE_MAP, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_CUBE_MAP, GL_TEXTURE_WRAP_R, GL_CLAMP_TO_EDGE); for (face = 0; face < 6; face++) { glTexImage2D(GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, 0, InternalFormat, size, size, 0, Format, Type, NULL); } // framebuffer object glGenFramebuffers(1, &fbo); glBindFramebuffer(GL_FRAMEBUFFER, fbo); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0, GL_TEXTURE_CUBE_MAP_POSITIVE_X, textureObject, 0); status = glCheckFramebufferStatus(GL_FRAMEBUFFER); printf("%d\"\n", status); printf("%d\n", GL_FRAMEBUFFER_COMPLETE); glViewport(0,0,size, size); for (face = 1; face < 6; face++) { drawSpheres(); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, textureObject, 0); } //Bind 0, which means render to back buffer, as a result, fb is unbound glBindFramebuffer(GL_FRAMEBUFFER, 0); return textureObject; }

  Read the article

• How to set default xrandr settings?

  - by echo-flow

  I'm trying to enable dual monitors in Ubuntu. This is working fine, but every time I do it, desktop effects is disabled. I think I've found the reason why, though: https://wiki.ubuntu.com/X/Config/Multihead/ As with the GNOME XRandR configuration method, setting Virtual to too large a value may result in a loss of hardware acceleration, and thus an inability to use Compiz and its desktop effects. When I use the GNOME monitor applet, or the Monitors configuration in the System menu, the default xrandr settings puts the second monitor to the right of the first, and, as I found with this bug, for most monitors this creates a virtual desktop larger than the maximum 2048 horizontal resolution needed for hardware acceleration on my netbook hardware. So, it seems like if I can modify xrandr's default settings so that it places the new desktop above or below (north or south of) the main LVDS display, then hardware acceleration, and therefore compiz will continue to work. Can anyone tell me, what is the easiest way to achieve this? UPDATE: I have confirmed that multihead support with desktop effects and hardware acceleration works when I move the external monitor display north of the main LVDS display. Right now this involves the following process: plugging in the external monitor, starting the Monitors configuration menu, desktop effects are disabled automatically (and all of the windows on my workspaces are moved to the first workspace), repositioning the external display so that it is north of LVDS display and clicking apply, and then navigating to the Appearance menu and telling it to reenable desktop effects. Is there a simpler way do this? UPDATE 2: OK, so I thought that perhaps the GNOME Monitors configuration screen was trying to be clever, and might be disbling desktop effects. So, I just tried using the xrandr command-line client instead, as follows: xrandr --output VGA1 --above LVDS1 When I do that, desktop effects are still disabled, and I need to manually reenable them. This, despite the fact that hardware acceleration works, and there is never a point where hardware acceleration stops working because the horizontal dimension of the virtual display is too large. So what program is trying to be clever, and is turning off desktop effects when it doesn't need to? And how do I make it stop? If there were a way to re-enable desktop effects from the command line, which I could then put into a script along with the proper xrandr invocation, I would accept that as a workaround. UPDATE 3: OK, here's my script to enable a second monitor with desktop effects. It might be evil, I'm not sure: second-monitor.sh xrandr --output VGA1 --above LVDS1 sleep 3 compiz --replace & The sleep statement might not be necessary. If there's a better way to do this, please let me know. UPDATE 4: This is a Dell Mini Inspiron 1012. Here are my system specifications: lspci -vv 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: Dell Device 041a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at f0b00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 18d0 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0900000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: Dell Device 041a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0b80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> lsmod | grep i915 i915 287458 2 drm_kms_helper 29329 1 i915 drm 162409 3 i915,drm_kms_helper intel_agp 24375 2 i915 i2c_algo_bit 5028 1 i915 video 17375 1 i915

  Read the article

• Cocos2d Box2d how to shoot an object inside the screen

  - by Ahoura Ghotbi

  I have the code below : - (id) initWithGame:(mainGame*)game { if ((self = [super init])) { isTouchEnabled_ = YES; self.game = game; CGSize size = [[CCDirector sharedDirector] winSize]; screenH = size.height; screenW = size.width; character = [CCSprite spriteWithFile:@"o.png"]; character.position = ccp( size.width /2 , size.height/2 ); character.contentSize = CGSizeMake(72, 79); [self addChild:character z:10 tag:1]; _body = NULL; _radius = 14.0f; // Create ball body and shape b2BodyDef ballBodyDef; ballBodyDef.type = b2_dynamicBody; ballBodyDef.position.Set(100/PTM_RATIO, 100/PTM_RATIO); ballBodyDef.userData = character; _body = _game.world->CreateBody(&ballBodyDef); b2CircleShape circle; circle.m_radius = 26.0/PTM_RATIO; b2FixtureDef ballShapeDef; ballShapeDef.shape = &circle; ballShapeDef.density = 1.0f; ballShapeDef.friction = 0.2f; ballShapeDef.restitution = 0.8f; _body->CreateFixture(&ballShapeDef); [self schedule:@selector(gameChecker:)]; [self schedule:@selector(tick:)]; } return self; } - (void)gameChecker:(ccTime) dt{ if(character.position.y > 200){ [self unschedule:@selector(tick:)]; [self schedule:@selector(dropObject:)]; } } - (void)tick:(ccTime) dt { b2Vec2 force; force.Set(_body->GetLinearVelocity().x, _body->GetLinearVelocity().y+1.0f); for (b2Body* b = _game.world->GetBodyList(); b; b = b->GetNext()) { if (b->GetUserData() == character) { b->SetLinearVelocity(force); } } _game.world->Step(dt, 10, 10); for(b2Body *b = _game.world->GetBodyList(); b; b=b->GetNext()) { if (b->GetUserData() != NULL) { CCSprite *ballData = (CCSprite *)b->GetUserData(); ballData.position = ccp(b->GetPosition().x * PTM_RATIO, b->GetPosition().y * PTM_RATIO); ballData.rotation = -1 * CC_RADIANS_TO_DEGREES(b->GetAngle()); } } } -(void)dropObject:(ccTime) dt{ b2Vec2 force; force.Set(_body->GetLinearVelocity().x, _body->GetLinearVelocity().y-1.0f); for (b2Body* b = _game.world->GetBodyList(); b; b = b->GetNext()) { if (b->GetUserData() == character) { b->SetLinearVelocity(force); } } _game.world->Step(dt, 10, 10); for(b2Body *b = _game.world->GetBodyList(); b; b=b->GetNext()) { if (b->GetUserData() != NULL) { CCSprite *ballData = (CCSprite *)b->GetUserData(); ballData.position = ccp(b->GetPosition().x * PTM_RATIO, b->GetPosition().y * PTM_RATIO); ballData.rotation = -1 * CC_RADIANS_TO_DEGREES(b->GetAngle()); } } } I have been trying to get the effect that fruit ninja has when shooting the fruits. but it seems like its hard to get such animation so I was wondering if anyone can point me to the right direction and/or give me a sample code for a single object that gets thrown into the screen with a direction.

  Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >