Search Results

Search found 35892 results on 1436 pages for 'a different ben'.

Page 397/1436 | < Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >

• linux: mount old ATA disk to USB adapter

  - by 130490868091234

  I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic Corp. SL11R-IDE IDE Bridge (04ce:0002), an ATA adapter to USB 1.0 like the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. I get different devices under, for example: /dev/bus/usb/003/002 or /dev/bus/usb/002/004, but I don't get any /dev/sdbN links. The output blkid -o list -c /dev/null is just the laptop's partitions. I have tried taking out the jumper, putting it as master and as CS Enabled, but didn't change the result. Any ideas?

  Read the article

• can't ssh from mac to windows (running ssh server on cygwin)

  - by Denise

  I set up an ssh server on a fresh windows 7 machine using the latest version of cygwin. Disabled the firewall. I can ssh into it from itself, from a different windows box (using winssh), and from a linux vm. In spite of that, I tried to ssh in from two different macs, and neither would let me! This is the debug output: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 3dbuild [172.18.4.219] port 22. debug1: Connection established. debug1: identity file /Users/Denise/.ssh/identity type -1 debug1: identity file /Users/Denise/.ssh/id_rsa type 1 debug1: identity file /Users/Denise/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5 debug1: match: OpenSSH_5.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '3dbuild' is known and matches the RSA host key. debug1: Found key in /Users/Denise/.ssh/known_hosts:43 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /Users/Denise/.ssh/identity debug1: Offering public key: /Users/Denise/.ssh/id_rsa Connection closed by [ip] It shows the same output, and fails at the same place, whether I have put my public key on the ssh server or not. Any help would be appreciated-- hopefully someone has run into this before?

  Read the article

• E-mail duplication problem

  - by Gavin Osborn

  I have taken out a hosting agreement with a well respected hosting provider for a couple of internet facing servers. We have deployed several applications to these servers which send various e-mails back to us for reporting purposes. Context: Each server runs Windows Server 2003 R2 with the IIS 6.0 SMTP service installed. Each application is configured to use the local instance of IIS to send e-mails. The external IP address of each server is mapped to a particular domain eg: server1.mydomain.com server2.mydomain.com These e-mails are sent from a company domain name and not the domain name of the hosted servers (eg: [email protected]) Symptoms: A small number (<1%) of e-mails sent from these applications appear to be duplicated. These are exact duplicate in terms of both content and message headers. The Fix: I contacted my hosting provider and they told me this was a common problem & instructed me to: Change the HELO response of your mail server service to a FQDN (server1.mydomain.com && server2.mydomain.com) Create a DNS A record that resolves the FQDN of your mail server to the primary IP address of your sending mail server. Create a PTR record that resolves your primary IP address back to your mail server's FQDN In the sending domain's (mycompanydomain.com) DNS zone file, add the appropriate SPF record for your hosted servers. eg: v=spf1 a mx include:mydomain -all The Problem Continues: I made all of the changes as prescribed above, I was a little hesitant because these steps seemed to suggest they were more for stopping your messages getting blocked than they were for stopping them from being duplicated - but I am certainly no expert in these matters. It has been 5 days since I applied this fix and the problem still persists. I am certain that these problems are not a bug in the software because they are 4 different applications installed on 2 different servers, all of whom are exhibiting this strange behaviour. This behaviour has also not been seen in our UAT environment. Were my hosts correct to suggest this fix? If not, does anyone know what could be the cause of this problem? Many Thanks

  Read the article

• Why does my DD-WRT not accept SSH connections from my laptop?

  - by Vlad Seghete

  So, here is my system: I have a 2Wire AT&T modem/router which I use for wireless and a Buffalo router flashed with DD-WRT which is physically attached to the 2Wire and set in the DMZ. I set everything up on the DD-WRT to be able to connect to it using ssh and also so that it forwards ssh requests on a different port to one of the servers behind it. Now, when I am physically connected to the DD-WRT all this works great and as I would want it to. I ssh into the two different ports using the WAN IP of my network, and I get where I expect to land. If, however, I am connected using wi-fi to the 2Wire, the same commands do not work. I do not get an error, simply a timeout. I have trouble understanding this, since the DD-WRT is set in the DMZ and everything should pass to it. To further complicate the problem, I tried connecting to the same IP using my phone (wireless disabled, so really from the WAN) and surprise, it works! If I go back on the local network by enabling the wifi, the ssh connection times out. To make this even stranger, my WAN IP address always responds to pings (meaning in all the above situations). What could be going on here? I know what I should do, completely disable the 2wire as a router and use it strictly as a modem and them use all the routing capabilities of the dd-wrt. It's what I will probably end up doing anyway, but my question remains, because I really want to know what is happening here.

  Read the article

• Which events specifically cause Windows 2008 to mark a SAN volume offline?

  - by Jeremy

  I am searching for specific criteria/events that will cause Windows 2008 to mark a SAN volume as offline in disk management, even though it is connected to that SAN volume via FC or iSCSI. Microsoft states that "A dynamic disk may become Offline if it is corrupted or intermittently unavailable. A dynamic disk may also become Offline if you attempt to import a foreign (dynamic) disk and the import fails. An error icon appears on the Offline disk. Only dynamic disks display the Missing or Offline status." I am specifically wondering if, on the SAN, changing the path to the disk (such as the disk being presented to the host via a different iSCSI target IQN or a different LUN #) would cause a volume to be offlined in disk management. Thanks! Edit: I have already found two reasons why a disk might be set offline, disk signature collisions and the SAN disk policy. Bounty would be awarded to someone who can find further documented reasons related to changes in the volume's path. Disk signature collisions: http://blogs.technet.com/b/markrussinovich/archive/2011/11/08/3463572.aspx SAN disk policy: http://jeffwouters.nl/index.php/2011/06/disk-offline-with-error-the-disk-is-offline-because-of-a-policy-set-by-an-administrator/

  Read the article

• Visual Studio 2010 won't compile/create new projects

  - by tuner

  My Visual Studio 2010 Professional with SP1 installed won't compile anymore. The shown error is: TRACKER : error TRK0005: Failed to locate: "CL.exe". The system cannot find the file specified. Strangely it is also not possible anymore to create new projects - the wizard appears but just restarts when I press create. As I found out the paths for Visual Studio are now built from settings in the registry. Namely HKEY_CURRENT_USER\Software\Microsoft\VisualStudio. Comparing a colleagues installation with mine revealed no different settings. So this is how the Property Pages/Configuration Properties/VC++ Directories look like: Executable Directories: $(ExecutablePath) Include Directories: $(IncludePath) Reference Directories: $(ReferencePath) Library Directories: $(LibraryPath) Source Directories: $(SourcePath) Exclude Directories: $(ExcludePath) From the Visual Studio 2010 Command Prompt, cl.exe is found. I can only guess that this behavior was caused by a reinstallation of Studio a couple of months ago (to a different folder). As we use an external build-script for our main project there is a good chance that it is broken since then. Any hints?

  Read the article

• Having Trouble Ripping Some CD's

  - by James

  Hi, When I buy CD's I tend to rip them to FLAC right away. When ripping I use Foobar2000 or Exact Audio Copy and enable secure ripping which uses error correction. Recently I bought a 2 CD compilation album brand new but when I tried to rip the second CD on my laptop using Foobar2000 it struggled with the last 2 tracks and was unable to finish. EAC was also unable to get an accurate rip and reports read errors. Ripping in fast mode results in audible errors in the output track. I have tried another computer and having similar problems. I cannot see any damage to the disc and it has not been dropped or anything. The weird thing is that I had similar problems with a different album and different PC a while back. This other CD was a compilation disk so it was also right up to the CD capacity limit and again it was the last few tracks that would not rip. Dozens of other discs have ripped fine So I am wondering if the CD is simply defective, or whether it is something else. How common are defective CD's? Do some CD drives struggle with CD's of this capacity? Or Is this some kind of copy protection? I'm thinking of asking Amazon for a replacement but it would be annoying if I get the same problem again.

  Read the article

• Application for time and project management

  - by user10826

  I want to improve the way I organize my projects/tasks/schedule What I do now is: keep an excel sheet with the name of the most important tasks/projects, I look at it at the beginning of each day and decide the ones I will focus on on iCal I write down events for each day, or for a concrete time (13 to 14 hours). I set up each day the tasks I want to accomlish, and allocate them hours I use Things (culture code) to keep info about tasks and projects not very important and which are not time allocated yet (GTD name = someday) I use Mail on Mac and create folders for the mails I want to process with the name of the different projects I save the main info for each project on freemind maps My system works well at the moment but it is pretty complicated to use. I want to make it better and I am looking for something with these requirements: must be 100% offline accessable it should use as less programs/resources as possible, ideally just one program should be able to manage all my info I can use the GTD methodology mixed with priorities and I can allocate each task converted to event on my calendar I can have different daily/weekly, etc views on a calendar to see the "big picture" must run on mac os x leopard price does not matter, I will pay for this So, according to your experience, can you recommend me something like this? Thanks

  Read the article

• How to move your Windows User Profile to another drive in Windows 8

  - by Mark

  I like to have my user folder on a different drive (D:) than my OS is (C:). Reading the following post I decided to give it a try. All went quite well, untill I found out that my Windows 8 Apps won't execute anymore (other than that I didn't noticed any problems). My apps do work, while using an account that isn't moved. In the eventviewer I've found error messages like these: App <Microsoft.MicrosoftSkyDrive> crashed with an unhandled Javascript exception. App details are as follows: Display Name:<SkyDrive>, AppUserModelId: <microsoft.microsoftskydrive_8wekyb3d8bbwe!Microsoft.MicrosoftSkyDrive> Package Identity:<microsoft.microsoftskydrive_16.4.4204.712_x64__8wekyb3d8bbwe> PID:<4452>. The details of the JavaScript exception are as follows Exception Name:<WinRT error>, Description:<Loading the state store failed. > , HTML Document Path:</modernskydrive/product/skydrive/App.html>, Source File Name:<ms-appx://microsoft.microsoftskydrive/jx/jx.js>, Source Line Number:<1>, Source Column Number:<27246>, and Stack Trace: ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:27246 localSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:51544 _initSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:54710 getApplicationStatus(boolean) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:48180 init(object) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:45583 Application(number, boolean) ms-appx://microsoft.microsoftskydrive/modernskydrive/product/skydrive/App.html:216:13 Anonymous function(object) Using ProcMon, I see a lot of access denied messages, like these: Date & Time: 12-9-2012 9:32:20 Event Class: File System Operation: CreateFile Result: ACCESS DENIED Path: D:\Users\John\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe\Settings\settings.dat TID: 2520 Duration: 0.0000149 Desired Access: Read Data/List Directory, Write Data/Add File, Read Control Disposition: OpenIf Options: Sequential Access, Synchronous IO Non-Alert, No Compression Attributes: N ShareMode: None AllocationSize: 0 Any idea how to solve this? I noticed that the app folders e.g.: D:\Users\john\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe had a different owner than the old profile folder had. Old profile folder had john as owner where my new profile folder had the Administrators group as owner. Changing this didn't help unfortunately.

  Read the article

• Subdocument in Word won't save

  - by ChrisW

  Because I know Word has a history of not liking very large documents (my supervisor specifically told me not to use LaTeX... grr), I decided to learn the Master document / subdocument feature of Word when writing my PhD thesis. I have the title page / table of contents etc in the master document, and each chapter as a separate document. However, when I save the master document, it appears to save all the chapter documents apart from one (Chapter 4), for which it brings up the Save Document dialog box, helpfully with "Chapter4.docx" in the "Save as" box (n.b. Chpater4.dox is not open). Clicking save does nothing, and doesn't make the dialog box go away. Saving as a different document means that my changes aren't reflected in the same document. There must be some reason Word doesn't like this particular document but I've got no idea why - there's nothing special in it that isn't in any of the other chapters. I have tried closing all documents, renaming Chapter4.docx, opening the master document, expanding all documents, OKing the warning that Chapter4.dox does not exist, and inserting the 'new' document, but even when I save the master document it still won't save the new Chapter4 document. If anyone knows any reason why Word is acting like this (or if I'm doing anything stupid), I'll be eternally grateful (p.s. sorry for the long rambling message. It's late; I've been working on my PhD 4.5 years, I really really want to throw this computer out the window, and I hope people are kind enough not to downvote this question because of it's rambling nature!) Update With Word closed, I've tried to delete Chapter4.docx (having made a backup!) - but I get a warning that it can't be deleted because it's open in Microsoft Word... these files are on a network drive and the same problems are happening on 2 different computers. I could login to the filestore through ssh and force the file to be deleted, but I'm curious to know why this is happening!

  Read the article

• setting up git on cygwin - openssl

  - by Pete Field

  I'm trying to get git running in cygwin on a windows 7 machine I have git unpacked and the directory git-1.7.1.1 when i run make install from within that directory, I get CC fast-import.o In file included from builtin.h:4, from fast-import.c:147: git-compat-util.h:136:19: iconv.h: No such file or directory git-compat-util.h:140:25: openssl/ssl.h: No such file or directory git-compat-util.h:141:25: openssl/err.h: No such file or directory In file included from builtin.h:6, from fast-import.c:147: cache.h:9:21: openssl/sha.h: No such file or directory In file included from fast-import.c:156: csum-file.h:10: error: parse error before "SHA_CTX" csum-file.h:10: warning: no semicolon at end of struct or union csum-file.h:15: error: 'crc32' redeclared as different kind of symbol /usr/include/zlib.h:1285: error: previous declaration of 'crc32' was here csum-file.h:15: error: 'crc32' redeclared as different kind of symbol /usr/include/zlib.h:1285: error: previous declaration of 'crc32' was here csum-file.h:17: error: parse error before '}' token fast-import.c: In function `store_object': fast-import.c:995: error: `SHA_CTX' undeclared (first use in this function) fast-import.c:995: error: (Each undeclared identifier is reported only once fast-import.c:995: error: for each function it appears in.) fast-import.c:995: error: parse error before "c" fast-import.c:1000: warning: implicit declaration of function `SHA1_Init' fast-import.c:1000: error: `c' undeclared (first use in this function) fast-import.c:1001: warning: implicit declaration of function `SHA1_Update' fast-import.c:1003: warning: implicit declaration of function `SHA1_Final' fast-import.c: At top level: fast-import.c:1118: error: parse error before "SHA_CTX" fast-import.c: In function `truncate_pack': fast-import.c:1120: error: `to' undeclared (first use in this function) fast-import.c:1126: error: dereferencing pointer to incomplete type fast-import.c:1127: error: dereferencing pointer to incomplete type fast-import.c:1128: error: dereferencing pointer to incomplete type fast-import.c:1128: error: `ctx' undeclared (first use in this function) fast-import.c: In function `stream_blob': fast-import.c:1140: error: `SHA_CTX' undeclared (first use in this function) fast-import.c:1140: error: parse error before "c" fast-import.c:1154: error: `pack_file_ctx' undeclared (first use in this functio n) fast-import.c:1154: error: dereferencing pointer to incomplete type fast-import.c:1160: error: `c' undeclared (first use in this function) make: *** [fast-import.o] Error 1 I'm guessing that most of these errors are due to the iconv.h and openssl files which apparently are missing, but I can't figure out how I'm supposed to install those (if I am), or if there is some other way to get around this.

  Read the article

• UDP blocked by Windows XP Firewall when sending to local machine

  - by user36367

  I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: Windows XP Professional with Service Pack 3, all updated Program that sends UDP datagrams Program that receives UDP datagrams Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas?

  Read the article

• Load balancing with puppet

  - by Gonçalo Queirós

  Hi there. Im trying to setup a loadbalancing system. My load balancer (nginx) has a conf file where i should list all IP's of the upstream servers. I could put the IP's on the conf manually, but this ways i would need to change the conf file every time i add/remove an upstream server. For now i came up with two different ideas, but i don't like much of neither: 1 - Have every upstream machine to use Exported Resources to create a file with it's IP..Then the load balancer server will have an "include conf_directory/*", and load all the files created by the upstrem servers. Since the load balancer is using nginx this can be done, but if i wan't latter on to configure something that doesn't have the "include" on the conf files, this solution will not work. 2 - If the config doesn't support the "include" command, then we could have again, every upstream server use the Exported Resources to create a filw with its IP, and latter on, the load balancer execute a command that would pick every file and generate the config Both versions addopt the same techinque, the difference is that version 2 is used when the server (that needs to have a conf generated) doesn't recognize a command like "include" inside its own conf. Now, my question is, is there any way to do this in a different form? I suspect that there is, since puppet is made to manage multiple servers, it seems a bit strange not have a easy way to configure load balancers.

  Read the article

• Gathering buslogic SCSI hardware and virtual machine operating system

  - by Julian

  I'm trying to use Powershell to get SCSI hardware from several virtual servers and get the operating system of each specific server. I've managed to get the specific SCSI hardware that I want to find with my code, however I'm unable to figure out how to properly get the operating system of each of the servers. Also, I'm trying to send all the data that I find into a csv log file, however I'm unsure of how you can make a powershell script create multiple columns. Here is my code (almost works but something's wrong): $log = "C:\Users\me\Documents\Scripts\ScsiLog.csv" Get-VM | Foreach-Object { $vm = $_ Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } | Foreach-Object { get-VMGuest -VM $vm } | Foreach-Object{ Write-output $vm.Guest.VmName >> $log } } I don't receive any errors when I run this code however whenever I run it I'm only getting the name of the servers and not the OS. Also I'm not sure what I need to do to make the OS appear in a different column from the name of the server in the csv log that I'm creating. What do I need to change in my code to get the OS version of each virtual machine and output it in a different column in my csv log file? EDIT: Here's a more in depth look at things I've tried that have all failed: Get-VM | Foreach-Object { $vm = $_ $svm = Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } Foreach-Object {get-VMGuest -VM $svm } | Foreach-Object{Write-output $svm >> $log} } #Get-VM | Foreach-Object { # $vm = $_ # Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic"} #| write-host $vm # | Foreach-Object { # # #get-VMGuest -VM $_ | # #write-host $vm # #get-VMGuest -VM $vm } | Foreach-Object{ # #write-output $vm.VmName >> $log # #write-output $vm.guest.VmName, get-VmGuest -VM $vm >> $log NO GOOD # # Write-host $vm.Guest.VmName #+ get-vmGuest -vm $VM >> $log # # # } # } I'm not sure why get-VmGuest fails though. I'm getting the scsi hardware, filtering the hardware to only get buslogic, and then wanting to get the operating system of just the filtered VMs. I don't see where my code fails though.

  Read the article

• UDP blocked by Windows XP Firewall when sending to local machine

  - by user36367

  Hi there, I work for a software development company but the issue doesn't seem to be programming-related. Here is my setup: - Windows XP Professional with Service Pack 3, all updated - Program that sends UDP datagrams - Program that receives UDP datagrams - Windows Firewall set to allow inbound UDP datagrams on a specific port (Scope: Subnet) If I send a UDP datagram on any port to other, similar machines, it goes through. If I send the UDP datagram to the same computer running the program that sends (whether using broadcast, localhost IP or the specific IP of the machine), the receiver program gets nothing. I've traced the problem down to the Windows XP Firewall, as Windows 7 does not have this problem (and I do not wish to sully my hands with Vista). If the exception I create for that UDP port in the WinXP firewall is set for a Scope of Subnet the datagram is blocked, but if I set it to All Computers or specifically enter my network settings (192.168.2.161 or 192.168.2.0/255.255.255.0) it works fine. Using different UDP ports makes no difference. I've tried different programs to reproduce this problem (ServerTalk to send and either IP Port Spy or PortPeeker to receive) to make sure it's not our code that's the issue, and those programs' datagrams were blocked as well. Also, that computer only has one network interface, so there are no additional network weirdness. I receive my IP from a DHCP server, so this is a straightforward setup. Given that it doesn't happen in Windows 7 I must assume it's a defect in the Windows XP Firewall, but I'd think someone else would have encountered this problem before. Has anyone encountered anything like this? Any ideas? Thanks in advance!

  Read the article

• Number of routers in small community lock up and require reboot.

  - by Anthony Hiscox

  I live in a small town which has one primary ISP. Lately I have noticed that a number of wireless routers have been locking up and requiring a reboot before allowing any connections. This has affected two of my routers, my work router, and a few others. In all cases wired continued to function as usual. Often wireless clients can see the SSID but simply won't connect. I can only think of a few possibilities and was hoping someone here might be able to point me in the right direction: Our ISP is well known to be flaky, something they are doing is causing this, what that might be I have no clue it as seems to affect the wireless only. There's a power issue in town, given our remote location and reputation for crap electrical, this seems reasonable. Only one router was plugged in to a UPS, and I'm not sure of the quality. There is some bug in all the different firmware for every one of these routers (all different). That doesn't seem reasonable, unless; it's an unknown (or known) exploit or DoS of some sort being launched by a massive team of ninjas hell bent on forcing us all to be tethered to our walls by ethernet cables or; it's just been a coincidence and I'm just paranoid (this has some weight, I mean read 4 again). Anyone else experience similar issues and have some tips?

  Read the article

• How far should we take the N+N redundancy craziness ?

  - by Brann

  The industry standard when it comes from redundancy is quite high, to say the least. To illustrate my point, here is my current setup (I'm running a financial service). Each server has a RAID array in case something goes wrong on one hard drive .... and in case something goes wrong on the server, it's mirrored by another spare identical server ... and both server cannot go down at the same time, because I've got redundant power, and redundant network connectivity, etc ... and my hosting center itself has dual electricity connections to two different energy providers, and redundant network connectivity, and redundant toilets in case the two security guards (sorry, four) needs to use it at the same time ... and in case something goes wrong anyway (a nuclear nuke? can't think of anything else), I've got another identical hosting facility in another country with the exact same setup. Cost of reputational damage if down = very high Probability of a hardware failure with my setup : <<1% Probability of a hardware failure with a less paranoiac setup : <<1% ASWELL Probability of a software failure in our application code : 1% (if your software is never down because of bugs, then I suggest you doublecheck your reporting/monitoring system is not down. Even SQLServer - which is arguably developed and tested by clever people with a strong methodology - is sometimes down) In other words, I feel like I could host a cheap laptop in my mother's flat, and the human/software problems would still be my higher risk. Of course, there are other things to take into consideration such as : scalability data security the clients expectations that you meet the industry standard But still, hosting two servers in two different data centers (without extra spare servers, nor doubled network equipment apart from the one provided by my hosting facility) would provide me with the scalability and the physical security I need. I feel like we're reaching a point where redundancy is just a communcation tool. Honestly, what's the difference between a 99.999% uptime and a 99.9999% uptime when you know you'll be down 1% of the time because of software bugs ? How far do you push your redundancy crazyness ?

  Read the article

• Selecting Interface for SSH Port Forwarding

  - by Eric Pruitt

  I have a server that we'll call hub-server.tld with three IP addresses 100.200.130.121, 100.200.130.122, and 100.200.130.123. I have three different machines that are behind a firewall, but I want to use SSH to port forward one machine to each IP address. For example: machine-one should listen for SSH on port 22 on 100.200.130.121, while machine-two should do the same on 100.200.130.122, and so on for different services on ports that may be the same across all of the machines. The SSH man page has -R [bind_address:]port:host:hostport listed I have gateway ports enabled, but when using -R with a specific IP address, server still listens on the port across all interfaces: machine-one: # ssh -NR 100.200.130.121:22:localhost:22 [email protected] hub-server.tld (Listens for SSH on port 2222): # netstat -tan | grep LISTEN tcp 0 0 100.200.130.121:2222 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN tcp 0 0 :::80 :::* LISTEN Is there a way to make SSH forward only connections on a specific IP address to machine-one so I can listen to port 22 on the other IP addresses at the same time, or will I have to do something with iptables? Here are all the lines in my ssh config that are not comments / defaults: Port 2222 Protocol 2 SyslogFacility AUTHPRIV PasswordAuthentication yes ChallengeResponseAuthentication no GSSAPIAuthentication no GSSAPICleanupCredentials no UsePAM yes AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes ClientAliveInterval 30 ClientAliveCountMax 1000000 UseDNS no Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Why does my Intel Tolapai network chip not transmit packets?

  - by Hanno Fietz

  I'm trying to deploy an embedded system (NISE 110 by Nexcom) based on the Intel EP80579 (Tolapai) chip. Tolapai apparently integrates controllers for Ethernet etc. on a single chip (Intel homepage). The machine can't get a network connection. Diagnosis as far as I could manage: Drivers drivers from Intel compiled and installed without problems (version 1.0.3-144). Kernel version and Linux distribution (CentOS 5.2, 2.6.18) match the driver's installation instructions. drivers are loaded and show up in lsmod (module names are gcu and iegbe) interfaces eth0 and eth1 show up in ifconfig ifconfig I can bring up the interfaces with fixed IP pinging the interface locally works ifconfig shows flag UP but not RUNNING Link ethtool shows "Link detected: no", "Speed: unknown (65536)" and "Duplex: unknown (255)" Link LED is on on the other side of the cable, ethtool shows "Link detected: yes" and reports a speed of 1000 Mbps, which has allegedly been auto-neogotiated with the problematic device. Network traffic analysis the device does not reply on ARP, ICMP echo or anything else (iptables is down) when trying to send ICMP or DHCP requests, they never reach the other end activity LED is off on the device, on at the other end. I tried the following without any effect: Different cables (2 straight, one crossed), I get the link LED lit up on each. Three different devices on the other end (one PC, one netbook, one router) Fixed ARP table entries on both sides Connecting both network ports of the machine with each other, won't ping through the cable, but will ping locally. Tried straight and crossed cables for that.

  Read the article

• Netgear router keeps disconnecting iPhone

  - by DisgruntledGoat

  My old router (Voyager 2091) packed up so I just got a new router - a Netgear N150 model DGN1000. My laptop connects OK wirelessly, but my iPhone 4S is constantly getting "disconnected" - it has perfect wifi signal and is seemingly connected to the router, but no pages load (it says "server cannot be found"). If I disconnect manually ("forget this network") then reconnect, it works fine again for a random amount of time (usually 10-30 minutes) then I get the same problem again. I've done some searching and this appears to be a known problem - there are dozens of forum posts out there lamenting similar connection problems. The only advice I have seen is to set a specific channel under Wireless Settings on the router CP, although every forum post recommends a different channel! 1, 3, 5, 6, 11... I have tried them all for hours at a time and get the exact same problem. The firmware is up to date. Is there an actual solution for this, or do I need to get a different router just to be able to use my iPhone?

  Read the article

• How to share text, pictures and video to restricted set of users

  - by joaoc

  I want to share pictures and videos of my kid growing up but I don't want it to be open to the public. I just want me and my wife to be able to add material and then share with grandparents and friends who would be given a username/password or some other solution that authenticates them. This content would preferably be available remotely over the internet or downloaded periodically to the allowed viewers computers. The second option most likely means they would have to install a client, which I am not too fond of doing (I would have to ask them to install it, help configure for different platforms, ...) I'm at the start but I would like software that also allows export of the data (if one day I want to migrate to a different solution). Folder sharing I don't know if Windows folder sharing is reliable, robust and safe enough to share over the internet. Dropbox could be a software solution, but it's limited to 2GB and requires receivers to also install and configure software. A folder is just a collection of files, so it would be harder to keep them organized with text describing the pictures/video Email I could email the content every now and then but videos are almost always too big to go as attachments This would also not provide a history of updates to anyone just recently joining in Are there other solutions to achieve this? NOTE: I also thought that software to run a local or remote blog could be an option but we aren't allowed to ask those questions on superuser because one admin doesn't like cloud-computing questions. But if you do think it's the best approach and can suggest a solution, do state it in the answers anyway!

  Read the article

• Exchange 2010 issuing NDRs to Hotmail/Live & few other domains on receipt of message

  - by John Patrick Dandison

  I'm working through a beast of an issue at the moment. Exchange 2010 single server on prem Hybrid deployment to Office 365 ESMTP filtering turned off on ASA Certain domains (most consistently, Hotmail/Live) cannot send us mail. At one point, we couldn't send out either, but I created a new Send Connector that forces HELO instead of EHLO. I turned on SMTP logging, an example of the failed inbound message connection is below. I've read that it could be that reverse DNS is the problem, i.e., the exchange banner smtp address needs to reverse-DNS back to the same IP. Since it's the default exchange connector, its banner is the server's name, but the DNS name of the MX record is different. I'm waiting for the PTR records to update to reflect the internal name as well. Is that the right direction? Is this all DNS or something different? SMTP Session Log (single failed session for illustration): SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders 220 ExchangeServerName.internalSubDomain.example.com Microsoft ESMTP MAIL Service ready at Mon, 15 Oct 2012 09:57:24 -0400 EHLO col0-omc3-s4.col0.hotmail.com 250-ExchangeServerName.internalSubDomain.example.com Hello [65.55.34.142] 250-SIZE 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-STARTTLS 250-X-ANONYMOUSTLS 250-AUTH NTLM LOGIN 250-X-EXPS GSSAPI NTLM 250-8BITMIME 250-BINARYMIME 250-CHUNKING 250-XEXCH50 250-XRDST 250 XSHADOW MAIL FROM:<[email protected]> 08CF5268DABBD9AA;2012-10-15T13:57:24.564Z;1 250 2.1.0 Sender OK RCPT TO:<[email protected]> 250 2.1.5 Recipient OK XXXX 1282 LAST Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXX from COL002-W38 ([65.55.34.135]) by col0-omc3-s4.col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command " XXXX 15 Oct 2012 06:57:24 -0700" Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXXXX <[email protected]> Tarpit for '0.00:00:05'

  Read the article

• Lookup Multiple Results for Multiple Criteria

  - by Matt

  I've got a list of parent SKUs for items I need to create in my inventory system. This list has been finely paired down to the 165 products we would like to carry. However, each one of these 165 SKUs has between 2 and 8 child SKUs of different colors, sizes, etc. Those are stored on a different worksheet, mixed into around 2500 items. Those are the SKUs I need to input into my inventory system. Here is what it looks like. Sheet 1 is just SKUs: A 1 2 3 4 Sheet 2 is comprised of all the child SKUs, with parent SKUs in column B. Not all parents have the same number of children: A B 1BLKM 1 1BLKL 1 1BLUM 1 2BLKM 2 2BLKL 2 2BLUM 2 2ORAM 2 3BLKM 3 3BLUM 3 I want to look up all of the child SKUs for the Parent SKU list that has been fine tuned. Parent SKU is included as a column on the child SKU worksheet. I need to lookup all matches of the Parent SKU, then continue to move down the parent SKU list until all matches for all 165 parent items have been found. It seems like every function I try can't use an Array for input. Is there a way to do this with Lookup or some combination of index, match, row, etc? Any way at all to do it without VBA? Or maybe even a VBA solution with code that I can understand, as someone who hasn't used VBA before.

  Read the article

• Redirect port / port 10000 to https apache

  - by Hamid Elaosta

  I have been reading around and trying different configurations to get a request to my server on port 10000 to redirect a http to a https request. For some reason I can't figure out how to make it happen when i use port 10000 although i can set a rewrite rule for port 80 (implicit) to do it: All I want is a request as follows: http://127.0.0.1:10000 to redirect me to https://127.0.0.1:10000 but it needs to be written so that it also works when accessed via my domain name externally. My current, vhost, the last of many different attempts is currently set as follows, but it doesn't seem to work at all: <VirtualHost *:10000> RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_POST}%{REQUEST_URI} ErrorLog "/var/log/httpd/webmin-redirect_error_log.log" CustomLog "/var/log/httpd/webmin-redirect_access_log.log" common </VirtualHost> I'v also tried a few other things but nothing seems to work, any help would be appreciated. EDIT: I already have a re-write in my httpd.conf that redirects port 80 to https. If I access port 10000 externally it is redirected to https, but from the lan "http://192.168.0.2:10000" it doesnt.

  Read the article

• Do eSATA HDD docking stations have a capacity limit?

  - by Michael Kjörling

  I'm looking at perhaps buying an eSATA docking station to be able to easily plug in and unplug hard disk drives, particularly but not necessarily only for backup purposes. Note: This is not a hardware shopping recommendation question. Please don't vote to close it as such. Looking at different models, I find for example this page detailing the Deltaco SI-7908SUS which specifically states "storage capacity: 1.5 TB" as well as "pictured hard disk not included, only for illustration". A customer review specifically mentions that it does not work with 3 TB drives, although does not go into any detail such as OS, drive model, etc. From a brief glance, the vendor's web site does not appear to say either way. Then there is the quite similar Deltaco SI-7908B3 which boasts on the box "all 2.5" and 3.5" HDD/SSD compatible". My question is: Why would what basically amounts to a SATA/eSATA adapter have any say in what storage capacity devices are supported? Does it? Assuming the OS supports the full capacity of the drive, why should introducing another (not even a different, really) connector change anything? Bonus question: Might it make a difference if the docking station exposes multiple interfaces (such as in the case of for example the SI-7908SUS exposing USB 2.0 and eSATA)? (I still think it shouldn't, but it'd be nice to have it confirmed.)

  Read the article

< Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >