Search Results

Search found 12310 results on 493 pages for 'andrew day'.

Page 397/493 | < Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >

• Analyze a BSOD (irql_less_than_or_equal)

  - by Bruno Reis

  Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

  Read the article

• The RTL8111/8168B NIC under Linux and the r8168 driver

  - by nik

  So I've got one of the infamous R8168 Realtek ethernet NIC, which have some problems under Linux. After some research, I found out I had to use the r8168 driver for this card (and not the r8169 which still loads when nothing else is available), which I did. So now everything works fine... Sort of. My download and upload rates are more than halved compared to what I should get. When I test (with eg. speedtest) I get something like 20M (often 15M) in download and 30M in upload, but if I test under Windows (everything is otherwise identical: same ethernet cable, same connection, at the same time of the day (well 5 min apart)...), I get 50M upload/download (which is what I expect). Where can it come from? Here's some info: ~ # lspci [...] 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) ~ # modinfo r8168 filename: /lib/modules/3.2.1-gentoo-r2/net/r8168.ko version: 8.027.00-NAPI license: GPL description: RealTek RTL-8168 Gigabit Ethernet driver author: Realtek and the Linux r8168 crew <[email protected]> srcversion: 0A6E9F1D4E8E51DE4B6BEE3 alias: pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* alias: pci:v000010ECd00008168sv*sd*bc*sc*i* depends: vermagic: 3.2.1-gentoo-r2 SMP mod_unload [...] ~ # mii-tool -v eth0: negotiated 100baseTx-HD, link ok product info: vendor 00:07:32, model 17 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• Dash (-) in directory listing

  - by Mazzy

  I've Googled around for this to no avail, I'm sure its just something simple but I have not been able to figure this out perhaps because searching in Google or SF for a "-" can be problematic. I had a strange directory listing show up the other day in my git repository within Drupal. Listing my sites directory looks like this: -sh-4.1$ ls -al total 52 drwxr-xr-x 5 (hide) (hide) 4096 Dec 6 16:15 . drwxr-xr-x 24 (hide) (hide) 4096 Dec 11 16:22 .. -rw-rw-r-- 1 (hide) (hide) 24271 Dec 6 15:57 – drwxrwxr-x 4 (hide) (hide) 4096 Sep 17 11:53 all drwxr-xr-x 3 (hide) (hide) 4096 Sep 17 11:54 default drwxrwxr-x 8 (hide) (hide) 4096 Dec 11 17:40 .git -rw-rw-r-- 1 (hide) (hide) 476 Sep 17 11:53 .gitignore -rw-rw-r-- 1 (hide) (hide) 81 Sep 17 11:53 README.md This "-" file cannot be opened and does not appear to be a symlink, although when I execute "cd -" I get this: -sh-4.1$ cd - /home/sites/dev1.(hide).com That is coincidentally or not the users home directory, and the site's root directory. The other strange this is this entry does not show up for any other user browsing this same directory. Nor does it show up for other users period in their Git directories. The entry cannot be removed via RM. Running Centos 6.2 by the way...

  Read the article

• No signal on monitor after plug it to a linux box

  - by yaroot

  I use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back! I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console. Edit: just one pci-e video card, has dvi, vga, tv/out (s-video) Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.

  Read the article

• Failed loading ioncube

  - by time

  I recently upgraded a small server to Ubuntu 12.10 (from 12.04), thus upgrading PHP from 5.3 to 5.4. However, I'm getting this in root's mailbox several times a day: Subject: Cron <root@xxxxxxx> [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -ignore_readdir_race -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete Content-Type: text/plain; charset=ANSI_X3.4-1968 X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> Message-Id: xxxxxxxxxxxxxxxxxxxxxxxx Date: Sun, 9 Dec 2012 05:09:02 -0500 (EST) Failed loading /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: /usr/lib/php5/20090626+lfs/ioncube_loader_lin_5.3.so: undefined symbol: php_body_write I assume that's coming up because it's for PHP 5.3. How can I just get rid of ioncube? I have no need for it, I don't even remember installing it. That .so file doesn't exist, and I've grep'd several locations for "ioncube" and I can't seem to figure how to stop that message from flooding the mailbox.

  Read the article

• Apache2/mod_fcgid/PHP Process Limits Not Respected

  - by Daniel

  I've recently moved to Apache2 / mod_fcgid / PHP from nginx / php_fpm. This is the second server on which I've made this migration, but it's used much less frequently than the first, which is working like a charm. The problem is in the PHP processes that it's spawning. In looking at the mod_fcgid documentation, it appears that the default for killing idle processes is 300 seconds; I've changed that to 20. At this point, I'd be fine if 300 would work - but it's not happening. It's been running for nearly a day now, and server-status shows 12 active processes: Process name: php5 Pid Active Idle Accesses State 19243 84879 14420 11 Ready Process name: php5 Pid Active Idle Accesses State 20954 82143 149 22 Ready 20947 82149 149 22 Ready 20953 82143 149 13 Ready Process name: php5 Pid Active Idle Accesses State 20589 82765 23644 72 Ready Process name: php5 Pid Active Idle Accesses State 17663 86103 2034 117 Ready Process name: php5 Pid Active Idle Accesses State 19862 83961 1976 91 Ready Process name: php5 Pid Active Idle Accesses State 18495 85825 5164 18 Ready Process name: php5 Pid Active Idle Accesses State 25463 75109 23948 24 Ready Process name: php5 Pid Active Idle Accesses State 2466 60019 60016 2 Ready Process name: php5 Pid Active Idle Accesses State 20729 82541 12592 23 Ready Process name: php5 Pid Active Idle Accesses State 22135 80616 46361 6 Ready PHP applications are not being served at this point - Apache is returning a 503. However, it is still serving the server-status module, and mod_mono/Mono 2.10 applications are still being served. The problem is with the PHP. /etc/apache2/mods-available/fcgid.conf... <IfModule mod_fcgid.c> AddHandler fcgid-script .fcgi FcgidConnectTimeout 10 FcgidMaxRequestsPerProcess 500 FcgidIdleTimeout 20 FcgidFixPathinfo 1 FcgidMaxProcesses 10 </IfModule> (heh - Max Processes isn't being respected either...) Of course, fcgid.conf is smylinked in mods-enabled.

  Read the article

• Is there an high quality natural text reader for the mac?

  - by Another Registered User

  I'm reading about 150 pages of text on screen, every day. I will have to read about 15.000 in the next upcoming months. No joke. Well, the problem is this: I suffer from a sort of attention deficit hyperactivity disorder which forces me to read every sentence up to 10 times until I really get it. Mac OS X Snow Leopard has a built-in text reader with the name "Alex". Although it is already pretty good quality, I know there are far better natural sounding voices out there. I have heard already voices that are absolutely amazing compared to Alex. They're so good, that you can't tell anymore the difference between a real person or a computer. Alex still has this "metal factor" in its voice, which makes my ears hurt after 8 hours of listening. The next problem with Alex is, that he never makes a break after a sentence. Also, it's not possible to think about a sentence and then continue reading. It's also not possible to have him repeat a sentence, without tedious text selection and shortcut usage. Actually, the best tool I can imagine would have the option to read a sentence and move on to the next one after pressing a special key, OR repeating the previously one after pressing a special key. That would help so much! And if that's even with one of those bell lab / AT&T / whatever super-natural voices, even better! But it would be already a great relief if there was just a better tool to control Alex. To let him make breaks after sentences or let him speak big chunks of text sentence-by-sentence with fine-grained control over repetition and moving on. Is there anything?

  Read the article

• Had almost 300 GB worth of files with random names on my computer, and now they are gone. Any idea what they were and where they went?

  - by John

  A couple of days ago I noticed I had a folder on my computer with more than 15 files in it. All the files were the exact same size (215 MB). They all had different names (just a bunch of random characters like Abe327(/-38s etc. I wasn't sure what they were so I decided to try to delete them. But then I noticed they disappeared from the D drive. Then the next day I noticed a new folder, with similar names and file sizes showed up on my C drive. The timestamps on the first set of files was almost all from a few months ago. Like the timestamps were saying 3:52 AM, 403 AM, etc. all from the same date. Then the set of files on the C drive that just appeared had yesterday's date on them. But similarly, all the files had timestamps within a 24 hour period. Like they had all just been created. Now this morning, all of those files are gone, and I didn't delete them. There are now no files like this in either drive. Any idea what these files were? Why were they so large, and why are they switching drives? Why did they disappear completely now, after the initial files were there for a few months.

  Read the article

• Abnormally high amount of Transmit discards reported by Solarwinds for multiple switches

  - by Jared

  I have several 3750X Cisco switches that, according to our Solarwinds NPM, are producing billions of transmit discards per day. I'm not sure why it's reporting these discards. Many of the ports on the 3750X's have 2960's connected to them and are hardcoded as trunk ports. Solarwinds NPM version 10.3 Cisco IOS version 12.2(58)SE2 Total output drops: 29139431: GigabitEthernet1/0/43 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is XXXX (bia XXXX) Description: XXXX MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:47, output 00:00:50, output hang never Last clearing of "show interface" counters 1w4d Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 29139431 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 35000 bits/sec, 56 packets/sec 51376 packets input, 9967594 bytes, 0 no buffer Received 51376 broadcasts (51376 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 51376 multicast, 0 pause input 0 input packets with dribble condition detected 115672302 packets output, 8673778028 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out sh controllers gigabitEthernet 1/0/43 utilization: Receive Bandwidth Percentage Utilization : 0 Transmit Bandwidth Percentage Utilization : 0

  Read the article

• I am under DDoS. What can I do?

  - by Falcon Momot

  This is a Canonical Question about DoS and DDoS mitigation. I found a massive traffic spike on a website that I host today; I am getting thousands of connections a second and I see I'm using all 100Mbps of my available bandwidth. Nobody can access my site because all the requests time out, and I can't even log into the server because SSH times out too! This has happened a couple times before, and each time it's lasted a couple hours and gone away on its own. Occasionally, my website has another distinct but related problem: my server's load average (which is usually around .25) rockets up to 20 or more and nobody can access my site just the same as the other case. It also goes away after a few hours. Restarting my server doesn't help; what can I do to make my site accessible again, and what is happening? Relatedly, I found once that for a day or two, every time I started my service, it got a connection from a particular IP address and then crashed. As soon as I started it up again, this happened again and it crashed again. How is that similar, and what can I do about it?

  Read the article

• Load Sharing Regarding Large Websites

  - by JHarley1

  Hello, I have a question regarding Load Sharing for large websites. My Understanding: So if you have a website that has millions of fits a day you will need to have an architecture that can support this sort of pressure. You can either do one or two things: Invest in a single large server that has huge amounts of processing power, memory and storage (such as Microsoft's TerraServer). Spread the load of your website across a number of machines. Let me tackle the second approach, so you have a collection of machines all running Web Server Software and all having access to identical copies of the websites pages. You can either spread the load across these machines using a cyclic pattern in a DNS or you can use a Load Ballancing Switch. The advantages of this approach is: - Redundancy - servers can fail and the others would "pick up the slack" - Incremental - the ability to easily add new machines to this set-up. My Question's Is there a Virtual approach to this issue of load balancing now? If the website runs from a database - is there still only a single copy of the database? If a user had a session running on one Server (e.g. they had gone to www.example.org and had been assigned to Server 2 - were they had created a session) if they refreshed the website (and were allocated Server 3) would they still have their session? What are the other disadvantages associated with Load Balancing? Many Thanks, J

  Read the article

• Can't make Dovecot communicate with Postfix using SASL (warning: SASL: Connect to private/auth failed: No such file or directory)

  - by Fred Rocha

  Solved. I will leave this as a reference to other people, as I have seen this error reported often enough on line. I had to change the path smtpd_sasl_path = private/auth in my /etc/postfix/main.cf to relative, instead of absolute. This is because in Debian Postfix runs chrooted (and how does this affect the path structure?! Anyone?) -- I am trying to get Dovecot to communicate with Postfix for SMTP support via SASL. the master plan is to be able to host multiple e-mail accounts on my (Debian Lenny 64 bits) server, using virtual users. Whenever I test my current configuration, by running telnet server-IP smtp I get the following error on mail.log warning: SASL: Connect to /var/spool/postfix/private/auth failed: No such file or directory Now, Dovecot is supposed to create the auth socket file, yet it doesn't. I have given the right privileges to the directory private, and even tried creating a auth file manually. The output of postconf -a is cyrus dovecot Am I correct in assuming from this that the package was compiled with SASL support? My dovecot.conf also holds client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } I have tried every solution out there, and am pretty much desperate after a full day of struggling with the issue. Can anybody help me, pretty please?

  Read the article

• Apache is spawning more and more processes!!

  - by erotsppa

  We have a LAMP setup that is working prety good for half a year. All of a sudden today the apache server (mysql servers are not on this box) started to die. It seems to have started to spawn more and more processes over time. Eventually it will consume all the memory and the server would just die. We are using prefork. In the mean time what we are doing is just added more ram and increased the MaxClients and ServerLimit parameter to 512. We're just prolonging the crash. The number still goes up slowly. Maybe in a day, it would reach that limit. What is going on? We only have around 15-20 request per second. We have 1Gb memory and it's not half used, there's no swapping going on. Why is apache creating more and more processes? It's almost like theres a leak somewhere! The database boxes are fine, they are not causing a delay to requests. We tested some queries everything is quick!

  Read the article

• 2008 Sever Randomly reboots.

  - by Jeff

  I'm out of ideas here. We have a 2008 Server that keeps rebooting 2-3 times a day at completely random times with an "Unexpected Shutdown" event. There are no Dumps, no events leading to it just like it loses power then comes back online. I ran a Diagnostic of the power supply and it has had continuous power for months. In addition, the temperature of the processors are maxing out at 40 degrees Celsius. Anyone have any ideas how to figure out why this is restarting all the time? This is a DMZed Web server so it doesn't do too much process wise. Here are the specs: Host Name: ~~~ OS Name: Microsoft Windows Server 2008 R2 Standard OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Server OS Build Type: Multiprocessor Free Registered Owner: Windows User Registered Organization: Product ID: ~~~ Original Install Date: 5/27/2010, 4:25:47 PM System Boot Time: 2/14/2011, 5:35:01 PM System Manufacturer: HP System Model: ProLiant DL380 G6 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 26 Stepping 5 GenuineIntel ~1586 Mhz BIOS Version: HP P62, 8/16/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume1 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 4,086 MB Available Physical Memory: 2,775 MB Virtual Memory: Max Size: 8,170 MB Virtual Memory: Available: 6,691 MB Virtual Memory: In Use: 1,479 MB Page File Location(s): C:\pagefile.sys

  Read the article

• Excel 2007: Named ranges problems when linking workbooks

  - by Mike

  I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

  Read the article

• Pure Terminal Server 2003 system hangs

  - by Donovan

  System Profile: IBM Server hardware Windows Ent Server 2003 running terminal services. No Citrix. Max user load: 30 Symptoms: While in the course of normal operation our terminal server will hang up. As far as I can tell there isn't any trigger that's plainly visible yet. The way in witch it hangs may give a clue though. The hang presents its self by users not being able to initiate any new processes. All processes currently loaded into memory work just fine. Example: outlook 2007. You may continue to read email, operate the client and such. Some people don't even realize the hang has occurred for a bit of time. My attempts to troubleshoot have been futile. Reacting to the hang does no good because I can't start any new processes to investigate. After I reboot the server my next instinct would be to begin logging to catch the hang occurring but I'm not sure what to log. Right now I'm attempting to keep process explorer running in case the issue occurs again. Sometimes it happens twice a day, other times, once a week. Anyone have any ideas on how I could set myself up for better success in tracking this problem down? Thanks, Donovan

  Read the article

• Windows 7 Folder Redirection (GPO)

  - by Kev

  I have been fighting this issue for a day or two now, so I am looking for some insight. I am taking over admin duties in a domain of 800 users, and the previous admins really did not employ much of any GPO settings for the clients of the Domain. In each site, there is a location on the file server where "Home" folders were manually created. EX: \server\home\enduser Whenever a user got a machine, the admin would manually right-click on the "My Documents" folder and manually enter the path to the home folder. We are planning to start putting Windows 7 machines on the Network, and I am wanting to automate as much as I can, everything that was not done in the past. Since everyone has exising "Home" folders I have been fighting and trying to get Folder Redirection to work with a new Windows 7 machine (In a Test OU). I am getting all kinds of errors and I can't get the Windows 7 "Documents" folder to redirect to the users EXISTING home folders. As I stated earlier, all of the Home folders were (and still are) manually created on the File Server and are set with the following Security permissions - Domain Admins - Full Control euser (end user) - Modify (Everything but Full) Can someone point me in the right direction on the proper setting to put in the Folder Redirection GPO to get this to work with the Existing Home folders.

  Read the article

• changing filesystem format from xfs to ext4 without losing data

  - by A.Rashad

  I have a fresh Lucid Lynx (Ubuntu 10.04) running on a laptop. where I defined the filesystems as: mount point / on ext4 (46 Gb) mount point /home on jfs (63 GB) swap as 3 Gb I left the machine over night to do some task, without AC power supply. next day in the morning I found it on standby, task completed, but filesystem was not reachable. it gave me I/O error it seems that there is a problem with jfs and standby. anyways, to avoid any hassle, I want to move this mount point from jfs format to ext4. can I do this without losing data and without the need to place the data in a temporary location until transformation is done? sorry to mention that, but I recall back in the windows days, we would change a FAT16 to FAT32 or a FAT32 to NTFS without having to lose the data. I hope this is available on Linux. Update The /home filesystem was xfs not jfs, and it seems there is a bug with this filesystem for some reason, I had to re-install the OS twice until I ended up with ext4 for the entire / However, as a conclusion, it seems that there is no way to make a conversion

  Read the article

• Cache updates when migrating DNS from one provider to another

  - by JohnCC

  This may be a Windows DNS specific question or a general DNS best practice question - I'm not sure! We migrated our 3rd party DNS provision from provider A to provider B. I noticed that our internal recursive windows DNS servers still had NS records cached for our domains pointing to provider A's servers, even though I changed the nameservers with our registrar several days ago, and even though selecting the properties of the cached records showed a TTL of 1 day. After 24 hours when the NS records in this cache have expired, will the DNS server go back to the TLD server for an update on the authority, or will it go by preference to dns1.providera.com since that is what it has cached? In this case I arranged to leave Provider A's servers up for a week to allow changes to propagate, so dns1.providera.com is still active and would still provide NS and SOA records that said that dns1.providera.com. was in charge of this domain. Given this fact, would the Windows DNS server ever go back to the TLD and pick up the authority changes, or would it just assume all was well and renew timestamps on its cached NS records? I wonder what would be the best approach to ensuring that caches pick this up. Should I:- (1) Leave Provider A's servers in place and active and wait for caches to catch up ... basically what we're doing now which seems to have issues - perhaps specifically for Windows servers, or perhaps more widely. (2) Leave Provider A's servers in place but change the NS and/or SOA information they provide to tell caches that new servers are in charge. (3) Remove Provider A's servers after 2*TTL to force remaining caches to update. The issue with (2) is that on Provider A's system I can't seem to change the NS or SOA information to anything other than their servers. The issue with (3) is that I'm not sure how a DNS server would behave in this case. When it couldn't reach the cached name servers, would it flush its cache and try a full recursive lookup, or would it just return an error, forcing the user to clear the cache manually? Thanks in advance!

  Read the article

• Video output vanishes and it isn't the video card... suggestions?

  - by Ira Baxter

  I have a high-end dual processor Dell workstation that operated for several years without problem. Recently, the video output has gone flaky, in the sense that after 2-3 days, it loses synch with the monitor (sometimes you can still see a hashed-mess of the what you expect to see on the screen). Poking at the keyboard, and accessing the file system on the machine from over the network, indicates that the machine is running fine and its just the video. A reboot fixes the problem... for another day or two. This in effect makes the machine unusable. So, I replaced the video card with an exact duplicate bought from e-bay. (I checked after the dupe arrived to be sure, yep, same model number). I still get the same behavior. So unless I believe that both video cards are broken the same way, I have to beleive this is a problem with the motherboard/power supply, neither of which I am inclined to replace. The only other possibility I can think of is a Windows update to the graphics driver. How would I check for this? Anybody had a similar problem? Otherwise we're junking what used to be a perfectly good machine. (Another couple of hours of more wasted effort and that's it in terms of economics anyway).

  Read the article

• VNC authentication failure

  - by cf16

  I try to connect to my vncserver running on CentOs from home computer, behind firewall. I have installed Win7 and Ubuntu both on this machine. I have an error: VNC conenction failed: vncserver too many security failures even when loging with right credentials (I reset passwd on CentOs) I get: authentication failure. I observe that I have to wait a whole day to be able to relogin at all. Is it something regarding that I try as root? I think important is also that I have to login to remote Centos through port 6050 - none else port works for me. Do I have to do something with other ports? I see that vncserver is listening on 5901, 5902 if another added - and I consider connection is established because from time to time (long time) the passwd prompt appears,... right? I have created additional user1, password for him to CentOS and to VNC, also user2. I do: service vncserver start and two servers starts, one :1, and second on :2. When I try to connect to vncserverIP:1 I get what described above, but when I try connect to vncserverIP:2 it says that the trial was unsuccessful. please help, what to do? additionally: how to disable this lockout for a testing purposes?

  Read the article

• Identifying Hard Drive as performance bottleneck for desktop machines

  - by Programming Hero

  I'm working in a development team where we all use laptops so we can work in multiple locations. These laptops are proving notoriously slow for development work, but at a glance they all look to have the specification for a much faster experience: CPU - Intel Core 2 Duo T7500 Memory - 2GB of RAM We all experience the biggest delays when the hard-drives are being accessed, particularly when swap-files are being thrashed. After doing a little bit of profile, a colleague discovered that our HDDs are seeing Read/Write speeds of about 10MB/sec. This seems abnormally low and we believe it the cause of the problem. Sensibly (though somewhat annoyingly) our business wont blow money on faster drives just to see if it fixes the problem; we need to illustrate this is definitely the problem and that buying some solid-state drives will make it go away. I need some way of showing how 90% of the system resources aren't being used over the course of a day, and that whenever there is utilization, it's all in HDD reads or writes. Are there any tools I could use to provide this information? Does it seem likely the problem is going to be fixed by a faster drive? Should I be looking for alternatives?

  Read the article

• Advanced Linux file permission question (ownership change during write operation)

  - by Kent

  By default the umask is 0022: usera@cmp$ touch somefile; ls -l total 0 -rw-r--r-- 1 usera usera 0 2009-09-22 22:30 somefile The directory /home/shared/ is meant for shared files and should be owned by root and the shared group. Files created here by usern (any user) are automatically owned by the shared group. There is a cron-job taking care of changing owning user and owning group (of any moved files) once per day: usera@cmp$ cat /etc/cron.daily/sharedscript #!/bin/bash chown -R root:shared /home/shared/ chmod -R 770 /home/shared/ I was writing a really large file to the shared directory. It had me (usera) as owning user and the shared group as group owner. During the write operation the cron job was run, and I still had no problem completing the write process. You see. I thought this would happen: I am writing the file. The file permissions and ownership data for the file looks like this: -rw-r--r-- usera shared The cron job kicks in! The chown line is processed and now the file is owned by the root user and the shared group. As the owning group only has read access to the file I get a file write error! Boom! End of story. Why did the operation succeed? A link to some kind of reference documentation to back up the reason would be very welcome (as I could use it to study more details).

  Read the article

• vmdk Recovery after migration from 3.5 to 4 and fallback tentative.

  - by olgirard

  Hy, I've tryed to migrate some VM from my 3.5i environment to a brand new vSphere 4.0 U1. The two platforms are running simultaneously, sharing the same SAN. I Migrate my VM by stopping it, unregistering in vcenter (esx ver. 3.5, i call it esx3), register in vSphere (esx ver. 4, i call it esx4), and migrate upgrade virtual hardware before powering it up (First mistake). vMotion was enabled on esx4, seem to be a second mistake. After a day or so, i encountred problems joigning the esx server (esx4) and decided to unregister my server for esx4 and fallback to esx3. esx3 refused to boot, i supposed this was due to virtual hardware in Version 7 so i recreated a new VM pointing to the vmdk of the old VM. Everithing seemed fine until i log into the server and discover that i was running on the original disk ith every snapshots ignored even those created on esx3. I tried to reboot VM on esx4 but VM doesn't power up because "The parent virtual disk has been modified since the child was created". I've got a copy of a later state of the drive but generated between two snapshots (ovf generated with canverter standalone) as a backup. Do i have a chance to recover at least some files on the virtual drive or (as i tink) all is played, i've done enought mistakes for this time. Thanks for your help.

  Read the article

• DPM 2007 clashing with existing SQL backup job

  - by Paul D'Ambra

  I've recently installed a DPM2007 server on Server 2003 and have set up a protection group against a server 2003 server running SQL 2005 SP3. The SQL server in question has a full backup (as a sql agent job) once a day and transaction log backups hourly. These are zipped up and FTP'd to a server offsite by a scheduled task. Since adding the DPM job I'm receiving many error messages: DPM tried to do a SQL log backup, either as part of a backup job or a recovery to latest point in time job. The SQL log backup job has detected a discontinuity in the SQL log chain for database SERVER_NAME\DB_Name since the last backup. All incremental backup jobs will fail until an express full backup runs. My google-fu suggests that I need to change the full backup my sqlagent job is running to a copy_only job. But I think this means that I can't use that backup with the transaction_logs to restore the database if the building (including the DPM server) burns down. I'm sure I'm missing something obvious and thought I'd see what the hivemind suggests. It is an option to set-up a co-located DPM server elsewhere and have DPM stream the backup but that's obviously more expensive than the current set up. Many thanks in advance

  Read the article

< Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >