Search Results

Search found 25521 results on 1021 pages for 'static objects'.

Page 398/1021 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

• ASA 5505 VPN setup. VPN works but still unable to reach devices in the inside network.

  - by chickenloop

  I've setup a Remote Access VPN on my Cisco ASA 5505. I'm able to connect to my ASA via my phone or the Cisco client, but I'm unable to reach devices in my inside LAN when connected via VPN. The setup is the following: Inside Network : 10.0.0.0/24 VPN_POOL: 172.16.0.0/24 Outside Network: 192.168.1.0/24 ASA is not the perimeter router, there is another device on the 192.168.1.0/24 network which is connected to my cable provider. Obviously UDP port 500 and 4500 are forwarded to the ASA's outside interface. Everything works perfectly, besides the VPN stuff. Config: interface Vlan1 nameif inside security-level 100 ip address 10.0.0.254 255.255.255.0 interface Vlan2 description Outside Interface nameif outside security-level 0 address 192.168.1.254 255.255.255.0 object network VPNPOOL subnet 172.16.0.0 255.255.255.0 object network INSIDE_LAN subnet 10.0.0.0 255.255.255.0 Then the exempt NAT rule. nat (inside,outside) source static INSIDE_LAN INSIDE_LAN destination static VPNPOOL VPNPOOL I don't think that the problem is with the VPN config, as I can successfully establish the VPN connection, but just in case I post it here: group-policy ZSOCA_ASA internal group-policy ZSOCA_ASA attributes vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel default-domain value default.domain.invalid tunnel-group ZSOCA_ASA type remote-access tunnel-group ZSOCA_ASA general-attributes address-pool VPNPOOL default-group-policy ZSOCA_ASA tunnel-group ZSOCA_ASA ipsec-attributes ikev1 pre-shared-key ***** Any ideas are welcome. Regards.

  Read the article

• lighttpd domains and url matching

  - by Manuel

  I'm trying to configure lighttpd so that: www.domain1.org/admin uses config1 any other URL on www.domain1.org uses config2 any url on www.domain2.org uses config2 So basically, domain1 and domain2 should use the same configuration except for when domain1 is accessed via an URL that starts with /admin I tried so far a number of variations, including this one: $HTTP["host"] =~ "domain1.org" { $HTTP["url"] =~ "^/admin" { // config1 alias.url = ("/media/admin" => "/usr/share...", "/static" => "/var/www/...") url.rewrite-once = ( "^(/media/admin.*)$" => "$1", "^(/static.*)$" => "$1", "^/favicon\.ico$" => "/media/favicon.ico", "^(/.*)$" => "/application.fcgi$1", ) server.document-root="/var/www/application" fastcgi.debug = 1 fastcgi.server = ( "/application.fcgi" => ( "main" => ( "socket" => "/var/www/application/application.sock", "check-local" => "disable", ) ), ) } else $HTTP["url"] !~ "^/admin" { // config2 } $HTTP["host"] !~ "domain1.org" { // config2 } But no matter what, accessing domain1.org/admin yields a 404. Is there anything that I am missing?

  Read the article

• Can't Ping - Wireless network of home

  - by Naunidh

  Hello, This may seem like other ping problem, but I have tried a lot before posting it here. I have a linksys WRT54G - firmware v8.00.8. I have two laptops one windows vista (192.168.1.99) and Windows Xp (192.168.1.13) connected on WiFi . The Router's IP address is 192.168.1.4, and default gateway is the ADSL modem (192.168.1.1) connected through wire. The problem is that laptops can not ping each other, they can ping the gateway and the linksys router, and both can access internet. Following has been tried (I am pinging from XP machine to Vista): I saw that arp entires for Vista machines were not being populated, so I added static ARP entries. 192.168.1.99 00-19-7e-70-d0-4e static I checked on ethereal that an ICMP packet for MAC address of Vista machine does go out from XP machine towards the Vista machine, but never reaches the Vista machine. So its get eaten by the Router? I added Vista machine to DMZ in my linksys router, so that all the ports are open (In case it was an issue). Firewalls , antivirus etc were turned off, echo was enabled explicitly on vista, file sharing, network discovery were turned on. Network type was set to private. Unchecked everything in Router;s firewall, even though they are only meant for WAN requests. Is there anything else that I should try. Thanks.

  Read the article

• Windows 7 VPN only works if I connect it to itself first

  - by user1799075

  Just so you have some detail, VPN request are port forwarded from a linksys router hosting the global static IP (to the world) to the windows 7 machine. The ports have been added to the OK list. I have the incoming VPN connection setup on win 7 but the only way it will work from anywhere outside the physical machine is if I connect from itself to itself first. For example, let's say my internal static IP is 10.0.0.50 and incoming VPN server connection IP is 10.0.0.80 (both on the same machine). I can't connect via VPN from anywhere unless I first VPN from the machines .50 address back to itself on the .80 address. Once I do that, I can connect form anywhere, even my phone. It's as if once the machine reboots it thinks it should block requests on .80 until .50 connects first. BitDefender antivirus/firewall is loaded (windows firewall is off) I don't see anywhere to exclude ports in the BitDefender control panel. Maybe this initial connection opens the ports and tags them as safe because the initial request came from the same machine? Any thoughts? It's driving me nuts and I'm sick of having to drive half way across town over to the server, try to get building access and do the initial connection. Please help

  Read the article

• Iptables - forward email ports?

  - by Emmet Brown

  im trying to open some local ports (LAN) and then re-direct them to another server (WAN) using iptables. Here is my config: #WAN allow-hotplug eth1 auto eth1 iface eth1 inet static #Tarjeta red WAN address 192.168.2.2 gateway 192.168.2.1 netmask 255.255.255.0 #LAN allow-hotplug eth0 auto eth0 iface eth0 inet static address 192.168.16.6 netmask 255.255.255.0 network 192.168.16.0 broadcast 192.168.16.255 I try this: iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 110 -j DNAT --to 200.40.30.218:110 iptables -A FORWARD -p tcp -i eth0 -o eth1 -d 200.40.30.218 --dport 110 -j ACCEPT iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 25 -j DNAT --to 200.40.30.218:25 iptables -A FORWARD -p tcp -i eth0 -o ethq -d 200.40.30.218 --dport 25 -j ACCEPT but, it did not work. i also try changeing eth0 to eth1 (and eth1 to eth0) but nothing happened. Starting Nmap 5.00 ( http://nmap.org ) at 2011-10-03 14:44 UYST Interesting ports on 192.168.16.6: Not shown: 997 closed ports PORT STATE SERVICE 22/tcp open ssh 111/tcp open rpcbind 8080/tcp open http-proxy Im running debian. Can u guys help me to check what is happening? edit: IPTABLES-SAVE # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *mangle :PREROUTING ACCEPT [139993:77867651] :INPUT ACCEPT [139385:77761761] :FORWARD ACCEPT [186:12071] :OUTPUT ACCEPT [173556:74341650] :POSTROUTING ACCEPT [173734:74352988] COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *nat :PREROUTING ACCEPT [1649:190626] :POSTROUTING ACCEPT [6729:339646] :OUTPUT ACCEPT [6697:337660] -A PREROUTING -i eth0 -p tcp -m tcp --dport 110 -j DNAT --to-destination 200.40.30.218:110 -A PREROUTING -i eth0 -p tcp -m tcp --dport 25 -j DNAT --to-destination 200.40.30.218:25 COMMIT # Completed on Mon Oct 3 15:43:14 2011 # Generated by iptables-save v1.4.8 on Mon Oct 3 15:43:14 2011 *filter :INPUT ACCEPT [138307:77066136] :FORWARD ACCEPT [168:11207] :OUTPUT ACCEPT [172288:73655708] -A FORWARD -d 200.40.30.218/32 -i eth0 -o eth1 -p tcp -m tcp --dport 110 -j ACCEPT -A FORWARD -d 200.40.30.218/32 -i eth0 -o ethq -p tcp -m tcp --dport 25 -j ACCEPT COMMIT # Completed on Mon Oct 3 15:43:14 2011 Regards

  Read the article

• Locate devices within a building

  - by ams0

  The situation: Our company is spread between two floors in a building. Every employee has a laptop (macbook Air or MacbookPro) and an iPhone. We have static DHCP mappings and DNS resolution so every mobile gets a name like employeeiphone.example.com, every macbook air gets a employeelaptop.example.com and every macbook pro gets a employeelaptop.example.com on the Ethernet interface (the wifi gets a dynamic IP from a small range dedicated for the purpose). We know each and every MAC address of phones and laptops, since we do DHCP static mapping (ISC DHCP server runs on linux). At each floor we have a Netgear stack of two switches, connected via 10GB fiber to each other. No VLANs so far. At every floor there are 4 Airport Extreme making a single SSID network with WPA2 authentication. The request: Our CTO wants to know who is present at which floor. My solution (so far): Every switch contains an table listing MAC address and originating port. On each switch stack, all the MAC addresses coming from the other floor are listed as coming on port 48 (the fiber link). So I came up with: 1) Get the table from each switch via SNMP 2) Filter out the ones associated with port 48 3) Grep dhcpd.conf, removing all entries not *laptop and not *iphone 4) Match the two lists for each switch, output in JSON or XML 5) present the results on a dashboard for all to see I wrote it in bash with a lot of awk and sed, it kinda works but I always have for some reason stale entries in the switch lookup tables, making it unreliable; some people may have put their laptop to sleep, their iphones drop connections after a while, if not woken up and so on..I searched left and right, we are prepared to spend a little on the project too (RFIDs?), does anybody do something similar? I can provide with the script if needed (although it's really specific to our switches and naming scheme). Thanks! p.s. perhaps is this a question for stackoverflow? please move if it so.

  Read the article

• How see the converted sql from ActiveRecord method in view, etc

  - by Jak

  Hi All, I will be happy if someone clear doubt, i can see objects in view by using <%= debug @object % and lot of methods is there apart from view like .to_yml, etc Is there any method available for seeing the converted sql from ActiveRecord method in view, etc. Although I can find it in console but it will confuse when we run multiple queries.. example: User.find :all it will produce "SELECT * FROM users;" in output console But i want it in view are any other specific point like yml , etc ? Thanks, Jak

  Read the article

• Combine multiple network interfaces to connect to a dedicated server

  - by Dženis Macanovic

  this is an underpaid employee writing, who's apparently responsible for all the IT stuff in a very small (non-IT) company. Today said company got a bunch of PCs/workstations, a switch, a computer that's supposed to be used as a router, two DSL connections (each 16 MBit/s downstream and 1 MBit/s upstream) and a dedicated server which is hosted and managed professionally by a larger local company with some decent connection speed (1 GBit/s both directions if I'm not mistaken). This is what I've set up (note I'm not making use of the second DSL connection at all)... ETH0 ETH1 [ SWITCH ]---[LINUX DEBIAN ROUTER]---[DSL MODEM 1]---[INTERNET] | | | PC1 | | PC2 | ... ... when my boss asked me, if it was somehow possible to get 32 MBit/s downstream and 2 MBit/s upstream. At that time I replied "no" without thinking too much about it. Now I've just had the following idea... ETH1 ETH0 ETH0 ,---[DSL MODEM 1 (NON-STATIC IP)]---, ,---, ETH0 [ SWITCH ]---[LINUX DEBIAN ROUTER] [INTERNET] [LINUX DEBIAN SERVER]---[INTERNET] | | | '---[ DSL MODEM 2 (STATIC IP) ]---' '---' PC1 | | ETH2 ETH0 PC2 | ... ... but I have absolutely no clue how to implement that. Would that even be possible? What would the masquerading rules look like on the router? What about the server? I didn't find anything on the internet, mainly because I couldn't come up with any good keywords to search for to begin with. English obviously isn't my first language. Thanks in advance for your time!

  Read the article

• Limiting database security

  - by Torbal

  A number of texts signify that the most important aspects offered by a DBMS are availability, integrity and secrecy. As part of a homework assignment I have been tasked with mentioning attacks which would affect each aspect. This is what I have come up with - are they any good? Availability - DDOS attack Integrity Secrecy - SQL Injection attack Integrity - Use of trojans to gain access to objects with higher security roles

  Read the article

• UITableView: Juxtaposing row, header, and footer insertions/deletions

  - by jdandrea

  Consider a very simple UITableView with one of two states. First state: One (overall) table footer One section containing two rows, a section header, and a section footer Second state: No table footer One section containing four rows and no section header/footer In both cases, each row is essentially one of four possible UITableViewCell objects, each containing its own UITextField. We don't even bother with reuse or caching, since we're only dealing with four known cells in this case. They've been created in an accompanying XIB, so we already have them all wired up and ready to go. Now consider we want to toggle between the two states. Sounds easy enough. Let's suppose our view controller's right bar button item provides the toggling support. We'll also track the current state with an ivar and enumeration. To be explicit for a sec, here's how one might go from state 1 to 2. (Presume we handle the bar button item's title as well.) In short, we want to clear out our table's footer view, then insert the third and fourth rows. We batch this inside an update block like so: // Brute forced references to the third and fourth rows in section 0 NSUInteger row02[] = {0, 2}; NSUInteger row03[] = {0, 3}; [self.tableView beginUpdates]; state = tableStateTwo; // 'internal' iVar, not a property self.tableView.tableFooterView = nil; [self.tableView insertRowsAtIndexPaths:[NSArray arrayWithObjects: [NSIndexPath indexPathWithIndexes:row02 length:2], [NSIndexPath indexPathWithIndexes:row03 length:2], nil] withRowAnimation:UITableViewRowAnimationFade]; [self.tableView endUpdates]; For the reverse, we want to reassign the table footer view (which, like the cells, is in the XIB ready and waiting), and remove the last two rows: // Use row02 and row03 from earlier snippet [self.tableView beginUpdates]; state = tableStateOne; self.tableView.tableFooterView = theTableFooterView; [self.tableView deleteRowsAtIndexPaths:[NSArray arrayWithObjects: [NSIndexPath indexPathWithIndexes:row02 length:2], [NSIndexPath indexPathWithIndexes:row03 length:2], nil] withRowAnimation:UITableViewRowAnimationFade]; [self.tableView endUpdates]; Now, when the table asks for rows, it's very cut and dry. The first two cells are the same in both cases. Only the last two appear/disappear depending on the state. The state ivar is consulted when the Table View asks for things like number of rows in a section, height for header/footer in a section, or view for header/footer in a section. This last bit is also where I'm running into trouble. Using the above logic, section 0's header/footer does not disappear. Specifically, the footer stays below the inserted rows, but the header now overlays the topmost row. If we switch back to state one, the section footer is removed, but the section header remains. How about using [self.tableView reloadData] then? Sure, why not. We take care not to use it inside the update block, per Apple's advisement, and simply add it after endUpdates. This time, good news! The section 0 header/footer disappears. :) However ... Toggling back to state one results in a most exquisite mess! The section 0 header returns, only to overlay the first row once again (instead of appear above it). The section 0 footer is placed below the last row just fine, but the overall table footer - now reinstated - overlays the section footer. Waaaaaah … now what? Just to be sure, let's toggle back to state two again. Yep, that looks fine. Coming back to state one? Yecccch. I also tried sprinkling in a few other stunts like using reloadSections:withRowAnimation:, but that only serves to make things worse. NSRange range = {0, 1}; NSIndexSet *indexSet = [NSIndexSet indexSetWithIndexesInRange:range]; ... [self.tableView reloadSections:indexSet withRowAnimation:UITableViewRowAnimationFade]; Case in point: If we invoke reloadSections... just before the end of the update block, changing to state two hides the first two rows from view, even though the space they would otherwise occupy remains. Switching back to state one returns section 0's header/footer to normal, but those first two rows remain invisible. Case two: Moving reloadSections... to just after the update block but before reloadData results in all rows becoming invisible! (I refer to the row as being invisible because, during tracing, tableView:cellForRowAtIndexPath: is returning bona-fide cell objects for those rows.) Case three: Moving reloadSections... after tableView:cellForRowAtIndexPath: brings us a bit closer, but the section 0 header/footer never returns when switching back to state one. Hmm. Perhaps it's a faux pas using both reloadSections... and reloadData, based on what I'm seeing at trace-time, which brings us to: Case four: Replacing reloadData with reloadSections... outright. All cells in state two disappear. All cells in state one remain missing as well (though the space is kept). So much for that theory. :) Tracing through the code, the cell and view objects, as well as the section heights, are all where they should be at the opportune times. They just aren't rendering sanely. So, how to crack this case? Clues welcome/appreciated!

  Read the article

• git push problem -argh!

  - by phil swenson

  Dunno what's going on, no response from github on this prob so I'm asking here. Tried a git push for the first time in a month or so and got this. Turned on export GIT_CURL_VERBOSE=1 and did a push and get this: localhost:send2mobile_rails phil$ git push Password: * Couldn't find host github.com in the .netrc file; using defaults * About to connect() to github.com port 443 (#0) * Trying 207.97.227.239... * Connected to github.com (207.97.227.239) port 443 (#0) * SSL connection using DHE-RSA-AES256-SHA * Server certificate: * subject: O=*.github.com; OU=Domain Control Validated; CN=*.github.com * start date: 2009-12-11 05:02:36 GMT * expire date: 2014-12-11 05:02:36 GMT * subjectAltName: github.com matched * issuer: C=US; ST=Arizona; L=Scottsdale; O=GoDaddy.com, Inc.; OU=http://certificates.godaddy.com/repository; CN=Go Daddy Secure Certification Authority; serialNumber=07969287 * SSL certificate verify ok. > GET /303devworks/send2mobile_rails.git/info/refs?service=git-receive-pack HTTP/1.1 User-Agent: git/1.7.1 Host: github.com Accept: */* Pragma: no-cache < HTTP/1.1 401 Authorization Required < Server: nginx/0.7.61 < Date: Tue, 01 Jun 2010 10:53:13 GMT < Content-Type: text/html; charset=iso-8859-1 < Connection: keep-alive < Content-Length: 0 < WWW-Authenticate: Basic realm="Repository" < * Connection #0 to host github.com left intact * Issue another request to this URL: 'https://[email protected]/MYUSERHERE/send2mobile_rails.git/info/refs?service=git-receive-pack' * Couldn't find host github.com in the .netrc file; using defaults * Re-using existing connection! (#0) with host github.com * Connected to github.com (207.97.227.239) port 443 (#0) * Server auth using Basic with user '303devworks' > GET /303devworks/send2mobile_rails.git/info/refs?service=git-receive-pack HTTP/1.1 Authorization: Basic MzAzZGVfd29sa3M6Y29nbmwzNzIw User-Agent: git/1.7.1 Host: github.com Accept: */* Pragma: no-cache < HTTP/1.1 200 OK < Server: nginx/0.7.61 < Date: Tue, 01 Jun 2010 10:53:13 GMT < Content-Type: application/x-git-receive-pack-advertisement < Connection: keep-alive < Status: 200 OK < Pragma: no-cache < Content-Length: 153 < Expires: Fri, 01 Jan 1980 00:00:00 GMT < Cache-Control: no-cache, max-age=0, must-revalidate < * Expire cleared * Connection #0 to host github.com left intact Counting objects: 166, done. Delta compression using up to 4 threads. Compressing objects: 100% (133/133), done. * Couldn't find host github.com in the .netrc file; using defaults * About to connect() to github.com port 443 (#0) * Trying 207.97.227.239... * connected * Connected to github.com (207.97.227.239) port 443 (#0) * SSL re-using session ID * SSL connection using DHE-RSA-AES256-SHA * old SSL session ID is stale, removing * Server certificate: * subject: O=*.github.com; OU=Domain Control Validated; CN=*.github.com * start date: 2009-12-11 05:02:36 GMT * expire date: 2014-12-11 05:02:36 GMT * subjectAltName: github.com matched * issuer: C=US; ST=Arizona; L=Scottsdale; O=GoDaddy.com, Inc.; OU=http://certificates.godaddy.com/repository; CN=Go Daddy Secure Certification Authority; serialNumber=07969287 * SSL certificate verify ok. * Server auth using Basic with user 'MYUSERHERE' > POST /303devworks/send2mobile_rails.git/git-receive-pack HTTP/1.1 Authorization: Basic JzAzZGV1d29ya3M6Y25nb29zNzIq User-Agent: git/1.7.1 Host: github.com Accept-Encoding: deflate, gzip Content-Type: application/x-git-receive-pack-request Accept: application/x-git-receive-pack-result Expect: 100-continue Transfer-Encoding: chunked * The requested URL returned error: 411 * Closing connection #0 error: RPC failed; result=22, HTTP code = 411 Writing objects: 100% (140/140), 2.28 MiB | 1.93 MiB/s, done. Total 140 (delta 24), reused 0 (delta 0) ^C localhost:send2mobile_rails phil$

  Read the article

• C++ Mutexes and STL Lists Across Subclasses

  - by Genesis

  I am currently writing a multi-threaded C++ server using Poco and am now at the point where I need to be keeping information on which users are connected, how many connections each of them have, and given it is a proxy server, where each of those connections are proxying through to. For this purpose I have created a ServerStats class which holds an STL list of ServerUser objects. The ServerStats class includes functions which can add and remove objects from the list as well as find a user in the list an return a pointer to them so I can access member functions within any given ServerUser object in the list. The ServerUser class contains an STL list of ServerConnection objects and much like the ServerStats class it contains functions to add, remove and find elements within this list. Now all of the above is working but I am now trying to make it threadsafe. I have defined a Poco::FastMutex within the ServerStats class and can lock/unlock this in the appropriate places so that STL containers are not modified at the same time as being searched for example. I am however having an issue setting up mutexes within the ServerUser class and am getting the following compiler error: /root/poco/Foundation/include/Poco/Mutex.h: In copy constructor âServerUser::ServerUser(const ServerUser&)â: src/SocksServer.cpp:185: instantiated from âvoid __gnu_cxx::new_allocator<_Tp::construct(_Tp*, const _Tp&) [with _Tp = ServerUser]â /usr/include/c++/4.4/bits/stl_list.h:464: instantiated from âstd::_List_node<_Tp* std::list<_Tp, _Alloc::_M_create_node(const _Tp&) [with _Tp = ServerUser, _Alloc = std::allocator]â /usr/include/c++/4.4/bits/stl_list.h:1407: instantiated from âvoid std::list<_Tp, _Alloc::_M_insert(std::_List_iterator<_Tp, const _Tp&) [with _Tp = ServerUser, _Alloc = std::allocator]â /usr/include/c++/4.4/bits/stl_list.h:920: instantiated from âvoid std::list<_Tp, _Alloc::push_back(const _Tp&) [with _Tp = ServerUser, _Alloc = std::allocator]â src/SocksServer.cpp:301: instantiated from here /root/poco/Foundation/include/Poco/Mutex.h:164: error: âPoco::FastMutex::FastMutex(const Poco::FastMutex&)â is private src/SocksServer.cpp:185: error: within this context In file included from /usr/include/c++/4.4/x86_64-linux-gnu/bits/c++allocator.h:34, from /usr/include/c++/4.4/bits/allocator.h:48, from /usr/include/c++/4.4/string:43, from /root/poco/Foundation/include/Poco/Bugcheck.h:44, from /root/poco/Foundation/include/Poco/Foundation.h:147, from /root/poco/Net/include/Poco/Net/Net.h:45, from /root/poco/Net/include/Poco/Net/TCPServerParams.h:43, from src/SocksServer.cpp:1: /usr/include/c++/4.4/ext/new_allocator.h: In member function âvoid __gnu_cxx::new_allocator<_Tp::construct(_Tp*, const _Tp&) [with _Tp = ServerUser]â: /usr/include/c++/4.4/ext/new_allocator.h:105: note: synthesized method âServerUser::ServerUser(const ServerUser&)â first required here src/SocksServer.cpp: At global scope: src/SocksServer.cpp:118: warning: âstd::string getWord(std::string)â defined but not used make: * [/root/poco/SocksServer/obj/Linux/x86_64/debug_shared/SocksServer.o] Error 1 The code for the ServerStats, ServerUser and ServerConnection classes is below: class ServerConnection { public: bool continue_connection; int bytes_in; int bytes_out; string source_address; string destination_address; ServerConnection() { continue_connection = true; } ~ServerConnection() { } }; class ServerUser { public: string username; int connection_count; string client_ip; ServerUser() { } ~ServerUser() { } ServerConnection* addConnection(string source_address, string destination_address) { //FastMutex::ScopedLock lock(_connection_mutex); ServerConnection connection; connection.source_address = source_address; connection.destination_address = destination_address; client_ip = getWord(source_address, ":"); _connections.push_back(connection); connection_count++; return &_connections.back(); } void removeConnection(string source_address) { //FastMutex::ScopedLock lock(_connection_mutex); for(list<ServerConnection>::iterator it = _connections.begin(); it != _connections.end(); it++) { if(it->source_address == source_address) { it = _connections.erase(it); connection_count--; } } } void disconnect() { //FastMutex::ScopedLock lock(_connection_mutex); for(list<ServerConnection>::iterator it = _connections.begin(); it != _connections.end(); it++) { it->continue_connection = false; } } list<ServerConnection>* getConnections() { return &_connections; } private: list<ServerConnection> _connections; //UNCOMMENTING THIS LINE BREAKS IT: //mutable FastMutex _connection_mutex; }; class ServerStats { public: int current_users; ServerStats() { current_users = 0; } ~ServerStats() { } ServerUser* addUser(string username) { FastMutex::ScopedLock lock(_user_mutex); for(list<ServerUser>::iterator it = _users.begin(); it != _users.end(); it++) { if(it->username == username) { return &(*it); } } ServerUser newUser; newUser.username = username; _users.push_back(newUser); current_users++; return &_users.back(); } void removeUser(string username) { FastMutex::ScopedLock lock(_user_mutex); for(list<ServerUser>::iterator it = _users.begin(); it != _users.end(); it++) { if(it->username == username) { _users.erase(it); current_users--; break; } } } ServerUser* getUser(string username) { FastMutex::ScopedLock lock(_user_mutex); for(list<ServerUser>::iterator it = _users.begin(); it != _users.end(); it++) { if(it->username == username) { return &(*it); } } return NULL; } private: list<ServerUser> _users; mutable FastMutex _user_mutex; }; Now I have never used C++ for a project of this size or mutexes for that matter so go easy please :) Firstly, can anyone tell me why the above is causing a compiler error? Secondly, can anyone suggest a better way of storing the information I require? Bear in mind that I need to update this info whenever connections come or go and it needs to be global to the whole server.

  Read the article

• T-SQL Dynamic SQL and Temp Tables

  - by George

  It looks like #temptables created using dynamic SQL via the EXECUTE string method have a different scope and can't be referenced by "fixed" SQLs in the same stored procedure. However, I can reference a temp table created by a dynamic SQL statement in a subsequence dynamic SQL but it seems that a stored procedure does not return a query result to a calling client unless the SQL is fixed. A simple 2 table scenario: I have 2 tables. Let's call them Orders and Items. Order has a Primary key of OrderId and Items has a Primary Key of ItemId. Items.OrderId is the foreign key to identify the parent Order. An Order can have 1 to n Items. I want to be able to provide a very flexible "query builder" type interface to the user to allow the user to select what Items he want to see. The filter criteria can be based on fields from the Items table and/or from the parent Order table. If an Item meets the filter condition including and condition on the parent Order if one exists, the Item should be return in the query as well as the parent Order. Usually, I suppose, most people would construct a join between the Item table and the parent Order tables. I would like to perform 2 separate queries instead. One to return all of the qualifying Items and the other to return all of the distinct parent Orders. The reason is two fold and you may or may not agree. The first reason is that I need to query all of the columns in the parent Order table and if I did a single query to join the Orders table to the Items table, I would be repoeating the Order information multiple times. Since there are typically a large number of items per Order, I'd like to avoid this because it would result in much more data being transfered to a fat client. Instead, as mentioned, I would like to return the two tables individually in a dataset and use the two tables within to populate a custom Order and child Items client objects. (I don't know enough about LINQ or Entity Framework yet. I build my objects by hand). The second reason I would like to return two tables instead of one is because I already have another procedure that returns all of the Items for a given OrderId along with the parent Order and I would like to use the same 2-table approach so that I could reuse the client code to populate my custom Order and Client objects from the 2 datatables returned. What I was hoping to do was this: Construct a dynamic SQL string on the Client which joins the orders table to the Items table and filters appropriate on each table as specified by the custom filter created on the Winform fat-client app. The SQL build on the client would have looked something like this: TempSQL = " INSERT INTO #ItemsToQuery OrderId, ItemsId FROM Orders, Items WHERE Orders.OrderID = Items.OrderId AND /* Some unpredictable Order filters go here */ AND /* Some unpredictable Items filters go here */ " Then, I would call a stored procedure, CREATE PROCEDURE GetItemsAndOrders(@tempSql as text) Execute (@tempSQL) --to create the #ItemsToQuery table SELECT * FROM Items WHERE Items.ItemId IN (SELECT ItemId FROM #ItemsToQuery) SELECT * FROM Orders WHERE Orders.OrderId IN (SELECT DISTINCT OrderId FROM #ItemsToQuery) The problem with this approach is that #ItemsToQuery table, since it was created by dynamic SQL, is inaccessible from the following 2 static SQLs and if I change the static SQLs to dynamic, no results are passed back to the fat client. 3 around come to mind but I'm look for a better one: 1) The first SQL could be performed by executing the dynamically constructed SQL from the client. The results could then be passed as a table to a modified version of the above stored procedure. I am familiar with passing table data as XML. If I did this, the stored proc could then insert the data into a temporary table using a static SQL that, because it was created by dynamic SQL, could then be queried without issue. (I could also investigate into passing the new Table type param instead of XML.) However, I would like to avoid passing up potentially large lists to a stored procedure. 2) I could perform all the queries from the client. The first would be something like this: SELECT Items.* FROM Orders, Items WHERE Order.OrderId = Items.OrderId AND (dynamic filter) SELECT Orders.* FROM Orders, Items WHERE Order.OrderId = Items.OrderId AND (dynamic filter) This still provides me with the ability to reuse my client sided object-population code because the Orders and Items continue to be returned in two different tables. I have a feeling to, that I might have some options using a Table data type within my stored proc, but that is also new to me and I would appreciate a little bit of spoon feeding on that one. If you even scanned this far in what I wrote, I am surprised, but if so, I woul dappreciate any of your thoughts on how to accomplish this best.

  Read the article

• EntityManager injection works in JBoss 7.1.1 but not WebSphere 7

  - by BikerJared

  I've built an EJB that will manage my database access. I'm building a web app around it that uses Struts 2. The problem I'm having is when I deploy the ear, the EntityManager doesn't get injected into my service class (and winds up null and results in NullPointerExceptions). The weird thing is, it works on JBoss 7.1.1 but not on WebSphere 7. You'll notice that Struts doesn't inject the EJB, so I've got some intercepter code that does that. My current working theory right now is that the WS7 container can't inject the EntityManager because of Struts for some unknown reason. My next step is to try Spring next, but I'd really like to get this to work if possible. I've spent a few days searching and trying various things and haven't had any luck. I figured I'd give this a shot. Let me know if I can provide additional information. <?xml version="1.0" encoding="UTF-8"?> <persistence xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.0" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"> <persistence-unit name="JPATestPU" transaction-type="JTA"> <description>JPATest Persistence Unit</description> <jta-data-source>jdbc/Test-DS</jta-data-source> <class>org.jaredstevens.jpatest.db.entities.User</class> <properties> <property name="hibernate.hbm2ddl.auto" value="update"/> </properties> </persistence-unit> </persistence> package org.jaredstevens.jpatest.db.entities; import java.io.Serializable; import javax.persistence.*; @Entity @Table public class User implements Serializable { private static final long serialVersionUID = -2643583108587251245L; private long id; private String name; private String email; @Id @GeneratedValue(strategy = GenerationType.TABLE) public long getId() { return id; } public void setId(long id) { this.id = id; } @Column(nullable=false) public String getName() { return this.name; } public void setName( String name ) { this.name = name; } @Column(nullable=false) public String getEmail() { return this.email; } @Column(nullable=false) public void setEmail( String email ) { this.email= email; } } package org.jaredstevens.jpatest.db.services; import java.util.List; import javax.ejb.Remote; import javax.ejb.Stateless; import javax.ejb.TransactionAttribute; import javax.ejb.TransactionAttributeType; import javax.persistence.EntityManager; import javax.persistence.PersistenceContext; import javax.persistence.PersistenceContextType; import javax.persistence.Query; import org.jaredstevens.jpatest.db.entities.User; import org.jaredstevens.jpatest.db.interfaces.IUserService; @Stateless(name="UserService",mappedName="UserService") @Remote public class UserService implements IUserService { @PersistenceContext(unitName="JPATestPU",type=PersistenceContextType.TRANSACTION) private EntityManager em; @TransactionAttribute(TransactionAttributeType.REQUIRED) public User getUserById(long userId) { User retVal = null; if(userId > 0) { retVal = (User)this.getEm().find(User.class, userId); } return retVal; } @TransactionAttribute(TransactionAttributeType.REQUIRED) public List<User> getUsers() { List<User> retVal = null; String sql; sql = "SELECT u FROM User u ORDER BY u.id ASC"; Query q = this.getEm().createQuery(sql); retVal = (List<User>)q.getResultList(); return retVal; } @TransactionAttribute(TransactionAttributeType.REQUIRED) public void save(User user) { this.getEm().persist(user); } @TransactionAttribute(TransactionAttributeType.REQUIRED) public boolean remove(long userId) { boolean retVal = false; if(userId > 0) { User user = null; user = (User)this.getEm().find(User.class, userId); if(user != null) this.getEm().remove(user); if(this.getEm().find(User.class, userId) == null) retVal = true; } return retVal; } public EntityManager getEm() { return em; } public void setEm(EntityManager em) { this.em = em; } } package org.jaredstevens.jpatest.actions.user; import javax.ejb.EJB; import org.jaredstevens.jpatest.db.entities.User; import org.jaredstevens.jpatest.db.interfaces.IUserService; import com.opensymphony.xwork2.ActionSupport; public class UserAction extends ActionSupport { @EJB(mappedName="UserService") private IUserService userService; private static final long serialVersionUID = 1L; private String userId; private String name; private String email; private User user; public String getUserById() { String retVal = ActionSupport.SUCCESS; this.setUser(userService.getUserById(Long.parseLong(this.userId))); return retVal; } public String save() { String retVal = ActionSupport.SUCCESS; User user = new User(); if(this.getUserId() != null && Long.parseLong(this.getUserId()) > 0) user.setId(Long.parseLong(this.getUserId())); user.setName(this.getName()); user.setEmail(this.getEmail()); userService.save(user); this.setUser(user); return retVal; } public String getUserId() { return this.userId; } public void setUserId(String userId) { this.userId = userId; } public String getName() { return this.name; } public void setName( String name ) { this.name = name; } public String getEmail() { return this.email; } public void setEmail( String email ) { this.email = email; } public User getUser() { return this.user; } public void setUser(User user) { this.user = user; } } package org.jaredstevens.jpatest.utils; import com.opensymphony.xwork2.ActionInvocation; import com.opensymphony.xwork2.interceptor.Interceptor; public class EJBAnnotationProcessorInterceptor implements Interceptor { private static final long serialVersionUID = 1L; public void destroy() { } public void init() { } public String intercept(ActionInvocation ai) throws Exception { EJBAnnotationProcessor.process(ai.getAction()); return ai.invoke(); } } package org.jaredstevens.jpatest.utils; import java.lang.reflect.Field; import javax.ejb.EJB; import javax.naming.Context; import javax.naming.InitialContext; import javax.naming.NamingException; public class EJBAnnotationProcessor { public static void process(Object instance)throws Exception{ Field[] fields = instance.getClass().getDeclaredFields(); if(fields != null && fields.length > 0){ EJB ejb; for(Field field : fields){ ejb = field.getAnnotation(EJB.class); if(ejb != null){ field.setAccessible(true); field.set(instance, EJBAnnotationProcessor.getEJB(ejb.mappedName())); } } } } private static Object getEJB(String mappedName) { Object retVal = null; String path = ""; Context cxt = null; String[] paths = {"cell/nodes/virgoNode01/servers/server1/","java:module/"}; for( int i=0; i < paths.length; ++i ) { try { path = paths[i]+mappedName; cxt = new InitialContext(); retVal = cxt.lookup(path); if(retVal != null) break; } catch (NamingException e) { retVal = null; } } return retVal; } } <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE struts PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 2.0//EN" "http://struts.apache.org/dtds/struts-2.0.dtd"> <struts> <constant name="struts.devMode" value="true" /> <package name="basicstruts2" namespace="/diagnostics" extends="struts-default"> <interceptors> <interceptor name="ejbAnnotationProcessor" class="org.jaredstevens.jpatest.utils.EJBAnnotationProcessorInterceptor"/> <interceptor-stack name="baseStack"> <interceptor-ref name="defaultStack"/> <interceptor-ref name="ejbAnnotationProcessor"/> </interceptor-stack> </interceptors> <default-interceptor-ref name="baseStack"/> </package> <package name="restAPI" namespace="/conduit" extends="json-default"> <interceptors> <interceptor name="ejbAnnotationProcessor" class="org.jaredstevens.jpatest.utils.EJBAnnotationProcessorInterceptor" /> <interceptor-stack name="baseStack"> <interceptor-ref name="defaultStack" /> <interceptor-ref name="ejbAnnotationProcessor" /> </interceptor-stack> </interceptors> <default-interceptor-ref name="baseStack" /> <action name="UserAction.getUserById" class="org.jaredstevens.jpatest.actions.user.UserAction" method="getUserById"> <result type="json"> <param name="ignoreHierarchy">false</param> <param name="includeProperties"> ^user\.id, ^user\.name, ^user\.email </param> </result> <result name="error" type="json" /> </action> <action name="UserAction.save" class="org.jaredstevens.jpatest.actions.user.UserAction" method="save"> <result type="json"> <param name="ignoreHierarchy">false</param> <param name="includeProperties"> ^user\.id, ^user\.name, ^user\.email </param> </result> <result name="error" type="json" /> </action> </package> </struts> Stack Trace java.lang.NullPointerException org.jaredstevens.jpatest.actions.user.UserAction.save(UserAction.java:38) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60) sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) java.lang.reflect.Method.invoke(Method.java:611) com.opensymphony.xwork2.DefaultActionInvocation.invokeAction(DefaultActionInvocation.java:453) com.opensymphony.xwork2.DefaultActionInvocation.invokeActionOnly(DefaultActionInvocation.java:292) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:255) org.jaredstevens.jpatest.utils.EJBAnnotationProcessorInterceptor.intercept(EJBAnnotationProcessorInterceptor.java:21) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) org.apache.struts2.interceptor.debugging.DebuggingInterceptor.intercept(DebuggingInterceptor.java:256) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.DefaultWorkflowInterceptor.doIntercept(DefaultWorkflowInterceptor.java:176) com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:98) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.validator.ValidationInterceptor.doIntercept(ValidationInterceptor.java:265) org.apache.struts2.interceptor.validation.AnnotationValidationInterceptor.doIntercept(AnnotationValidationInterceptor.java:68) com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:98) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.ConversionErrorInterceptor.intercept(ConversionErrorInterceptor.java:138) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.ParametersInterceptor.doIntercept(ParametersInterceptor.java:211) com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:98) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.ParametersInterceptor.doIntercept(ParametersInterceptor.java:211) com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:98) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.StaticParametersInterceptor.intercept(StaticParametersInterceptor.java:190) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) org.apache.struts2.interceptor.MultiselectInterceptor.intercept(MultiselectInterceptor.java:75) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) org.apache.struts2.interceptor.CheckboxInterceptor.intercept(CheckboxInterceptor.java:90) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) org.apache.struts2.interceptor.FileUploadInterceptor.intercept(FileUploadInterceptor.java:243) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.ModelDrivenInterceptor.intercept(ModelDrivenInterceptor.java:100) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.ScopedModelDrivenInterceptor.intercept(ScopedModelDrivenInterceptor.java:141) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.ChainingInterceptor.intercept(ChainingInterceptor.java:145) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.PrepareInterceptor.doIntercept(PrepareInterceptor.java:171) com.opensymphony.xwork2.interceptor.MethodFilterInterceptor.intercept(MethodFilterInterceptor.java:98) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.I18nInterceptor.intercept(I18nInterceptor.java:176) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) org.apache.struts2.interceptor.ServletConfigInterceptor.intercept(ServletConfigInterceptor.java:164) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.AliasInterceptor.intercept(AliasInterceptor.java:192) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) com.opensymphony.xwork2.interceptor.ExceptionMappingInterceptor.intercept(ExceptionMappingInterceptor.java:187) com.opensymphony.xwork2.DefaultActionInvocation.invoke(DefaultActionInvocation.java:249) org.apache.struts2.impl.StrutsActionProxy.execute(StrutsActionProxy.java:54) org.apache.struts2.dispatcher.Dispatcher.serviceAction(Dispatcher.java:511) org.apache.struts2.dispatcher.ng.ExecuteOperations.executeAction(ExecuteOperations.java:77) org.apache.struts2.dispatcher.ng.filter.StrutsPrepareAndExecuteFilter.doFilter(StrutsPrepareAndExecuteFilter.java:91) com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:188) com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:116) com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:77) com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:908) com.ibm.ws.webcontainer.filter.WebAppFilterManager.invokeFilters(WebAppFilterManager.java:997) com.ibm.ws.webcontainer.extension.DefaultExtensionProcessor.invokeFilters(DefaultExtensionProcessor.java:1062) com.ibm.ws.webcontainer.extension.DefaultExtensionProcessor.handleRequest(DefaultExtensionProcessor.java:982) com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3935) com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:276) com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:931) com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1583) com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:186) com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:452) com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.java:511) com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java:305) com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214) com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113) com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165) com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217) com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161) com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138) com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204) com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775) com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905) com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1604)

  Read the article

• C#: Inheritance, Overriding, and Hiding

  - by Rosarch

  I'm having difficulty with an architectural decision for my C# XNA game. The basic entity in the world, such as a tree, zombie, or the player, is represented as a GameObject. Each GameObject is composed of at least a GameObjectController, GameObjectModel, and GameObjectView. These three are enough for simple entities, like inanimate trees or rocks. However, as I try to keep the functionality as factored out as possible, the inheritance begins to feel unwieldy. Syntactically, I'm not even sure how best to accomplish my goals. Here is the GameObjectController: public class GameObjectController { protected GameObjectModel model; protected GameObjectView view; public GameObjectController(GameObjectManager gameObjectManager) { this.gameObjectManager = gameObjectManager; model = new GameObjectModel(this); view = new GameObjectView(this); } public GameObjectManager GameObjectManager { get { return gameObjectManager; } } public virtual GameObjectView View { get { return view; } } public virtual GameObjectModel Model { get { return model; } } public virtual void Update(long tick) { } } I want to specify that each subclass of GameObjectController will have accessible at least a GameObjectView and GameObjectModel. If subclasses are fine using those classes, but perhaps are overriding for a more sophisticated Update() method, I don't want them to have to duplicate the code to produce those dependencies. So, the GameObjectController constructor sets those objects up. However, some objects do want to override the model and view. This is where the trouble comes in. Some objects need to fight, so they are CombatantGameObjects: public class CombatantGameObject : GameObjectController { protected new readonly CombatantGameModel model; public new virtual CombatantGameModel Model { get { return model; } } protected readonly CombatEngine combatEngine; public CombatantGameObject(GameObjectManager gameObjectManager, CombatEngine combatEngine) : base(gameObjectManager) { model = new CombatantGameModel(this); this.combatEngine = combatEngine; } public override void Update(long tick) { if (model.Health <= 0) { gameObjectManager.RemoveFromWorld(this); } base.Update(tick); } } Still pretty simple. Is my use of new to hide instance variables correct? Note that I'm assigning CombatantObjectController.model here, even though GameObjectController.Model was already set. And, combatants don't need any special view functionality, so they leave GameObjectController.View alone. Then I get down to the PlayerController, at which a bug is found. public class PlayerController : CombatantGameObject { private readonly IInputReader inputReader; private new readonly PlayerModel model; public new PlayerModel Model { get { return model; } } private float lastInventoryIndexAt; private float lastThrowAt; public PlayerController(GameObjectManager gameObjectManager, IInputReader inputReader, CombatEngine combatEngine) : base(gameObjectManager, combatEngine) { this.inputReader = inputReader; model = new PlayerModel(this); Model.Health = Constants.PLAYER_HEALTH; } public override void Update(long tick) { if (Model.Health <= 0) { gameObjectManager.RemoveFromWorld(this); for (int i = 0; i < 10; i++) { Debug.WriteLine("YOU DEAD SON!!!"); } return; } UpdateFromInput(tick); // .... } } The first time that this line is executed, I get a null reference exception: model.Body.ApplyImpulse(movementImpulse, model.Position); model.Position looks at model.Body, which is null. This is a function that initializes GameObjects before they are deployed into the world: public void Initialize(GameObjectController controller, IDictionary<string, string> data, WorldState worldState) { controller.View.read(data); controller.View.createSpriteAnimations(data, _assets); controller.Model.read(data); SetUpPhysics(controller, worldState, controller.Model.BoundingCircleRadius, Single.Parse(data["x"]), Single.Parse(data["y"]), bool.Parse(data["isBullet"])); } Every object is passed as a GameObjectController. Does that mean that if the object is really a PlayerController, controller.Model will refer to the base's GameObjectModel and not the PlayerController's overriden PlayerObjectModel? In response to rh: This means that now for a PlayerModel p, p.Model is not equivalent to ((CombatantGameObject)p).Model, and also not equivalent to ((GameObjectController)p).Model. That is exactly what I do not want. I want: PlayerController p; p.Model == ((CombatantGameObject)p).Model p.Model == ((GameObjectController)p).Model How can I do this? override?

  Read the article

• Why is the class wrong for NSFetchRequest?

  - by Stephen Furlani

  Hello, I am working with an undocumented API (Osirix) and I have a sister-question to the one I posted here. I am having trouble loading objects from a managed object context. With loading from API, using their instance of _context and _model 2010-05-28 14:05:13.588 OsiriX[44012:a0f] Entity: Study 2010-05-28 14:05:13.589 OsiriX[44012:a0f] EntityClassName: DicomStudy 2010-05-28 14:05:13.589 OsiriX[44012:a0f] ClassName: DicomStudy With loading from Fetch Request (and my own instance of _context, and _model) 2010-05-28 14:19:09.956 rcOsirix[44431:7a03] Entity: Study 2010-05-28 14:19:09.957 rcOsirix[44431:7a03] EntityClassName: DicomStudy 2010-05-28 14:19:09.958 rcOsirix[44431:7a03] ClassName: NSManagedObject output given by: NSLog(@"Entity: %@",[[item entity] name]); NSLog(@"EntityClassName: %@", [[item entity] managedObjectClassName]); NSLog(@"ClassName: %s", class_getName(object_getClass([item class]))); So it is obvious that even though the Entity thinks it is a DicomSeries - it is not. It is just a NSManagedObject. DicomSeries has some "hard-coded" KVC stuff that I ran into a problem with in my other question. I'm pursuing a different line of reasoning in this thread - with the loading of the objects. The following is their code: - (NSManagedObjectModel *)managedObjectModel { if (managedObjectModel) return managedObjectModel; NSMutableSet *allBundles = [[NSMutableSet alloc] init]; [allBundles addObject: [NSBundle mainBundle]]; [allBundles addObjectsFromArray: [NSBundle allFrameworks]]; managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL: [NSURL fileURLWithPath: [[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:@"/OsiriXDB_DataModel.mom"]]]; [allBundles release]; return managedObjectModel; } - (NSManagedObjectContext *) managedObjectContextLoadIfNecessary:(BOOL) loadIfNecessary { NSError *error = nil; NSString *localizedDescription; NSFileManager *fileManager; if( currentDatabasePath == nil) return nil; if (managedObjectContext) return managedObjectContext; if( loadIfNecessary == NO) return nil; fileManager = [NSFileManager defaultManager]; [persistentStoreCoordinator release]; persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel: self.managedObjectModel]; managedObjectContext = [[NSManagedObjectContext alloc] init]; [managedObjectContext setPersistentStoreCoordinator: persistentStoreCoordinator]; NSURL *url = [NSURL fileURLWithPath: currentDatabasePath]; if (![persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:url options:nil error:&error]) { NSLog(@"********** managedObjectContextLoadIfNecessary FAILED: %@", error); localizedDescription = [error localizedDescription]; error = [NSError errorWithDomain:@"OsiriXDomain" code:0 userInfo:[NSDictionary dictionaryWithObjectsAndKeys:error, NSUnderlyingErrorKey, [NSString stringWithFormat:@"Store Configuration Failure: %@", ((localizedDescription != nil) ? localizedDescription : @"Unknown Error")], NSLocalizedDescriptionKey, nil]]; } [[managedObjectContext undoManager] setLevelsOfUndo: 1]; [[managedObjectContext undoManager] disableUndoRegistration]; // This line is very important, if there is NO database.sql file [self saveDatabase: currentDatabasePath]; return managedObjectContext; } This is my code: NSManagedObjectModel* DataModule::managedObjectModel() { if (_managedObjectModel) return _managedObjectModel; NSMutableSet *allBundles = [[NSMutableSet alloc] init]; [allBundles addObject: [NSBundle mainBundle]]; [allBundles addObjectsFromArray: [NSBundle allFrameworks]]; _managedObjectModel = [[NSManagedObjectModel alloc] initWithContentsOfURL: [NSURL fileURLWithPath: [[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:@"/OsiriXDB_DataModel.mom"]]]; [allBundles release]; return [_managedObjectModel retain]; } ... NSError *error = nil; [_storeCoordinator release]; _storeCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel: managedObjectModel()]; _context = [[NSManagedObjectContext alloc] init]; [_context setPersistentStoreCoordinator: _storeCoordinator]; NSURL *url = [NSURL fileURLWithPath: [[NSString alloc] initWithCString:_DBPath.c_str()]]; if (url == nil) { [pool release]; _loadLock = false; return nil; } if (![_storeCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:url options:nil error:&error]) { NSLog(@"********** managedObjectContextLoadIfNecessary FAILED: %@", error); NSString *localizedDescription = [error localizedDescription]; error = [NSError errorWithDomain:@"OsiriXDomain" code:0 userInfo:[NSDictionary dictionaryWithObjectsAndKeys:error, NSUnderlyingErrorKey, [NSString stringWithFormat:@"Store Configuration Failure: %@", ((localizedDescription != nil) ? localizedDescription : @"Unknown Error")], NSLocalizedDescriptionKey, nil]]; //Exit Failure [pool release]; _loadLock = false; return nil; } [[_context undoManager] setLevelsOfUndo: 1]; [[_context undoManager] disableUndoRegistration]; ... I am including all the same frameworks.... but _allBundles isn't even used to create the managedObjectModel so I don't know what it's supposed to do except load them into memory so that the mom can look at them while loading. Totally lost. Help! Why would objects returned by my FetchRequest with the same Entity come out as NSManagedObjects and not DicomStudys? I'm including DicomStudy.h so it should see the object during creation of the model, context, and fetch request. [request setEntity: [[managedObjectModel() entitiesByName] objectForKey:@"Study"]]; Thanks in advance, -Stephen

  Read the article

• What's wrong with Bundler working with RubyGems to push a Git repo to Heroku?

  - by stanigator

  I've made sure that all the files are in the root of the repository as recommended in this discussion. However, as I follow the instructions in this section of the book, I can't get through the section without the problems. What do you think is happening with my system that's causing the error? I have no clue at the moment of what the problem means despite reading the following in the log. Thanks in advance for your help! stanley@ubuntu:~/rails_sample/first_app$ git push heroku master Warning: Permanently added the RSA host key for IP address '50.19.85.156' to the list of known hosts. Counting objects: 96, done. Compressing objects: 100% (79/79), done. Writing objects: 100% (96/96), 28.81 KiB, done. Total 96 (delta 22), reused 0 (delta 0) -----> Heroku receiving push -----> Ruby/Rails app detected -----> Installing dependencies using Bundler version 1.2.0.pre Running: bundle install --without development:test --path vendor/bundle --binstubs bin/ --deployment Fetching gem metadata from https://rubygems.org/....... Installing rake (0.9.2.2) Installing i18n (0.6.0) Installing multi_json (1.3.5) Installing activesupport (3.2.3) Installing builder (3.0.0) Installing activemodel (3.2.3) Installing erubis (2.7.0) Installing journey (1.0.3) Installing rack (1.4.1) Installing rack-cache (1.2) Installing rack-test (0.6.1) Installing hike (1.2.1) Installing tilt (1.3.3) Installing sprockets (2.1.3) Installing actionpack (3.2.3) Installing mime-types (1.18) Installing polyglot (0.3.3) Installing treetop (1.4.10) Installing mail (2.4.4) Installing actionmailer (3.2.3) Installing arel (3.0.2) Installing tzinfo (0.3.33) Installing activerecord (3.2.3) Installing activeresource (3.2.3) Installing coffee-script-source (1.3.3) Installing execjs (1.3.2) Installing coffee-script (2.2.0) Installing rack-ssl (1.3.2) Installing json (1.7.3) with native extensions Installing rdoc (3.12) Installing thor (0.14.6) Installing railties (3.2.3) Installing coffee-rails (3.2.2) Installing jquery-rails (2.0.2) Using bundler (1.2.0.pre) Installing rails (3.2.3) Installing sass (3.1.18) Installing sass-rails (3.2.5) Installing sqlite3 (1.3.6) with native extensions Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb checking for sqlite3.h... no sqlite3.h is missing. Try 'port install sqlite3 +universal' or 'yum install sqlite-devel' and check your shared library search path (the location where your sqlite3 shared library is located). *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/local/bin/ruby --with-sqlite3-dir --without-sqlite3-dir --with-sqlite3-include --without-sqlite3-include=${sqlite3-dir}/include --with-sqlite3-lib --without-sqlite3-lib=${sqlite3-dir}/lib --enable-local --disable-local Gem files will remain installed in /tmp/build_3tplrxvj7qa81/vendor/bundle/ruby/1.9.1/gems/sqlite3-1.3.6 for inspection. Results logged to /tmp/build_3tplrxvj7qa81/vendor/bundle/ruby/1.9.1/gems/sqlite3-1.3.6/ext/sqlite3/gem_make.out An error occurred while installing sqlite3 (1.3.6), and Bundler cannot continue. Make sure that `gem install sqlite3 -v '1.3.6'` succeeds before bundling. ! ! Failed to install gems via Bundler. ! ! Heroku push rejected, failed to compile Ruby/rails app To [email protected]:growing-mountain-2788.git ! [remote rejected] master -> master (pre-receive hook declined) error: failed to push some refs to '[email protected]:growing-mountain-2788.git' ------Gemfile------------------------ As requested, here's the auto-generated gemfile: source 'https://rubygems.org' gem 'rails', '3.2.3' # Bundle edge Rails instead: # gem 'rails', :git => 'git://github.com/rails/rails.git' gem 'sqlite3' gem 'json' # Gems used only for assets and not required # in production environments by default. group :assets do gem 'sass-rails', '~> 3.2.3' gem 'coffee-rails', '~> 3.2.1' # See https://github.com/sstephenson/execjs#readme for more supported runtimes # gem 'therubyracer', :platform => :ruby gem 'uglifier', '>= 1.0.3' end gem 'jquery-rails' # To use ActiveModel has_secure_password # gem 'bcrypt-ruby', '~> 3.0.0' # To use Jbuilder templates for JSON # gem 'jbuilder' # Use unicorn as the app server # gem 'unicorn' # Deploy with Capistrano # gem 'capistrano' # To use debugger # gem 'ruby-debug'

  Read the article

• Pass a Delphi class to a C++ function/method that expects a class with __thiscall methods.

  - by Alan G.

  I have some MSVC++ compiled DLL's for which I have created COM-like (lite) interfaces (abstract Delphi classes). Some of those classes have methods that need pointers to objects. These C++ methods are declared with the __thiscall calling convention (which I cannot change), which is just like __stdcall, except a this pointer is passed on the ECX register. I create the class instance in Delphi, then pass it on to the C++ method. I can set breakpoints in Delphi and see it hitting the exposed __stdcall methods in my Delphi class, but soon I get a STATUS_STACK_BUFFER_OVERRUN and the app has to exit. Is it possible to emulate/deal with __thiscall on the Delphi side of things? If I pass an object instantiated by the C++ system then all is good, and that object's methods are called (as would be expected), but this is useless - I need to pass Delphi objects. Edit 2010-04-19 18:12 This is what happens in more detail: The first method called (setLabel) exits with no error (though its a stub method). The second method called (init), enters then dies when it attempts to read the vol parameter. C++ Side #define SHAPES_EXPORT __declspec(dllexport) // just to show the value class SHAPES_EXPORT CBox { public: virtual ~CBox() {} virtual void init(double volume) = 0; virtual void grow(double amount) = 0; virtual void shrink(double amount) = 0; virtual void setID(int ID = 0) = 0; virtual void setLabel(const char* text) = 0; }; Delphi Side IBox = class public procedure destroyBox; virtual; stdcall; abstract; procedure init(vol: Double); virtual; stdcall; abstract; procedure grow(amount: Double); virtual; stdcall; abstract; procedure shrink(amount: Double); virtual; stdcall; abstract; procedure setID(val: Integer); virtual; stdcall; abstract; procedure setLabel(text: PChar); virtual; stdcall; abstract; end; TMyBox = class(IBox) protected FVolume: Double; FID: Integer; FLabel: String; // public constructor Create; destructor Destroy; override; // BEGIN Virtual Method implementation procedure destroyBox; override; stdcall; // empty - Dont need/want C++ to manage my Delphi objects, just call their methods procedure init(vol: Double); override; stdcall; // FVolume := vol; procedure grow(amount: Double); override; stdcall; // Inc(FVolume, amount); procedure shrink(amount: Double); override; stdcall; // Dec(FVolume, amount); procedure setID(val: Integer); override; stdcall; // FID := val; procedure setLabel(text: PChar); override; stdcall; // Stub method; empty. // END Virtual Method implementation property Volume: Double read FVolume; property ID: Integer read FID; property Label: String read FLabel; end; I would have half expected using stdcall alone to work, but something is messing up, not sure what, perhaps something to do with the ECX register being used? Help would be greatly appreciated. Edit 2010-04-19 17:42 Could it be that the ECX register needs to be preserved on entry and restored once the function exits? Is the this pointer required by C++? I'm probably just reaching at the moment based on some intense Google searches. I found something related, but it seems to be dealing with the reverse of this issue.

  Read the article

• Condition Variable in Shared Memory - is this code POSIX-conformant?

  - by GrahamS

  We've been trying to use a mutex and condition variable to synchronise access to named shared memory on a LynuxWorks LynxOS-SE system (POSIX-conformant). One shared memory block is called "/sync" and contains the mutex and condition variable, the other is "/data" and contains the actual data we are syncing access to. We're seeing failures from pthread_cond_signal() if both processes don't perform the mmap() calls in exactly the same order, or if one process mmaps in some other piece of shared memory before it mmaps the sync memory. This example code is about as short as I can make it: #include <sys/types.h> #include <sys/stat.h> #include <sys/mman.h> #include <sys/file.h> #include <stdlib.h> #include <pthread.h> #include <errno.h> #include <iostream> #include <string> using namespace std; static const string shm_name_sync("/sync"); static const string shm_name_data("/data"); struct shared_memory_sync { pthread_mutex_t mutex; pthread_cond_t condition; }; struct shared_memory_data { int a; int b; }; //Create 2 shared memory objects // - sync contains 2 shared synchronisation objects (mutex and condition) // - data not important void create() { // Create and map 'sync' shared memory int fd_sync = shm_open(shm_name_sync.c_str(), O_CREAT|O_RDWR, S_IRUSR|S_IWUSR); ftruncate(fd_sync, sizeof(shared_memory_sync)); void* addr_sync = mmap(0, sizeof(shared_memory_sync), PROT_READ|PROT_WRITE, MAP_SHARED, fd_sync, 0); shared_memory_sync* p_sync = static_cast<shared_memory_sync*> (addr_sync); // init the cond and mutex pthread_condattr_t cond_attr; pthread_condattr_init(&cond_attr); pthread_condattr_setpshared(&cond_attr, PTHREAD_PROCESS_SHARED); pthread_cond_init(&(p_sync->condition), &cond_attr); pthread_condattr_destroy(&cond_attr); pthread_mutexattr_t m_attr; pthread_mutexattr_init(&m_attr); pthread_mutexattr_setpshared(&m_attr, PTHREAD_PROCESS_SHARED); pthread_mutex_init(&(p_sync->mutex), &m_attr); pthread_mutexattr_destroy(&m_attr); // Create the 'data' shared memory int fd_data = shm_open(shm_name_data.c_str(), O_CREAT|O_RDWR, S_IRUSR|S_IWUSR); ftruncate(fd_data, sizeof(shared_memory_data)); void* addr_data = mmap(0, sizeof(shared_memory_data), PROT_READ|PROT_WRITE, MAP_SHARED, fd_data, 0); shared_memory_data* p_data = static_cast<shared_memory_data*> (addr_data); // Run the second process while it sleeps here. sleep(10); int res = pthread_cond_signal(&(p_sync->condition)); assert(res==0); // <--- !!!THIS ASSERT WILL FAIL ON LYNXOS!!! munmap(addr_sync, sizeof(shared_memory_sync)); shm_unlink(shm_name_sync.c_str()); munmap(addr_data, sizeof(shared_memory_data)); shm_unlink(shm_name_data.c_str()); } //Open the same 2 shared memory objects but in reverse order // - data // - sync void open() { sleep(2); int fd_data = shm_open(shm_name_data.c_str(), O_RDWR, S_IRUSR|S_IWUSR); void* addr_data = mmap(0, sizeof(shared_memory_data), PROT_READ|PROT_WRITE, MAP_SHARED, fd_data, 0); shared_memory_data* p_data = static_cast<shared_memory_data*> (addr_data); int fd_sync = shm_open(shm_name_sync.c_str(), O_RDWR, S_IRUSR|S_IWUSR); void* addr_sync = mmap(0, sizeof(shared_memory_sync), PROT_READ|PROT_WRITE, MAP_SHARED, fd_sync, 0); shared_memory_sync* p_sync = static_cast<shared_memory_sync*> (addr_sync); // Wait on the condvar pthread_mutex_lock(&(p_sync->mutex)); pthread_cond_wait(&(p_sync->condition), &(p_sync->mutex)); pthread_mutex_unlock(&(p_sync->mutex)); munmap(addr_sync, sizeof(shared_memory_sync)); munmap(addr_data, sizeof(shared_memory_data)); } int main(int argc, char** argv) { if(argc>1) { open(); } else { create(); } return (0); } Run this program with no args, then another copy with args, and the first one will fail at the assert checking the pthread_cond_signal(). But change the open() function to mmap() the "/sync" memory first and it will all work fine. This seems like a major bug in LynxOS but LynuxWorks claim that using mutex and condition variable in this way is not covered by the POSIX standard, so they are not interested. Can anyone determine if this code does violate POSIX? Or does anyone have any convincing documentation that it is POSIX compliant?

  Read the article

• opengl problem works on droid but not droid eris and others.

  - by nathan

  This GlRenderer works fine on the moto droid, but does not work well at all on droid eris or other android phones does anyone know why? package com.ntu.way2fungames.spacehockeybase; import java.io.DataInputStream; import java.io.IOException; import java.nio.Buffer; import java.nio.FloatBuffer; import javax.microedition.khronos.egl.EGLConfig; import javax.microedition.khronos.opengles.GL10; import com.ntu.way2fungames.LoadFloatArray; import com.ntu.way2fungames.OGLTriReader; import android.content.res.AssetManager; import android.content.res.Resources; import android.opengl.GLU; import android.opengl.GLSurfaceView.Renderer; import android.os.Handler; import android.os.Message; public class GlRenderer extends Thread implements Renderer { private float drawArray[]; private float yoff; private float yoff2; private long lastRenderTime; private float[] yoffs= new float[10]; int Width; int Height; private float[] pixelVerts = new float[] { +.0f,+.0f,2, +.5f,+.5f,0, +.5f,-.5f,0, +.0f,+.0f,2, +.5f,-.5f,0, -.5f,-.5f,0, +.0f,+.0f,2, -.5f,-.5f,0, -.5f,+.5f,0, +.0f,+.0f,2, -.5f,+.5f,0, +.5f,+.5f,0, }; @Override public void run() { } private float[] arenaWalls = new float[] { 8.00f,2.00f,1f,2f,2f,1f,2.00f,8.00f,1f,8.00f,2.00f,1f,2.00f,8.00f,1f,8.00f,8.00f,1f, 2.00f,8.00f,1f,2f,2f,1f,0.00f,0.00f,0f,2.00f,8.00f,1f,0.00f,0.00f,0f,0.00f,10.00f,0f, 8.00f,8.00f,1f,2.00f,8.00f,1f,0.00f,10.00f,0f,8.00f,8.00f,1f,0.00f,10.00f,0f,10.00f,10.00f,0f, 2f,2f,1f,8.00f,2.00f,1f,10.00f,0.00f,0f,2f,2f,1f,10.00f,0.00f,0f,0.00f,0.00f,0f, 8.00f,2.00f,1f,8.00f,8.00f,1f,10.00f,10.00f,0f,8.00f,2.00f,1f,10.00f,10.00f,0f,10.00f,0.00f,0f, 10.00f,10.00f,0f,0.00f,10.00f,0f,0.00f,0.00f,0f,10.00f,10.00f,0f,0.00f,0.00f,0f,10.00f,0.00f,0f, 8.00f,6.00f,1f,8.00f,4.00f,1f,122f,4.00f,1f,8.00f,6.00f,1f,122f,4.00f,1f,122f,6.00f,1f, 8.00f,6.00f,1f,122f,6.00f,1f,120f,7.00f,0f,8.00f,6.00f,1f,120f,7.00f,0f,10.00f,7.00f,0f, 122f,4.00f,1f,8.00f,4.00f,1f,10.00f,3.00f,0f,122f,4.00f,1f,10.00f,3.00f,0f,120f,3.00f,0f, 480f,10.00f,0f,470f,10.00f,0f,470f,0.00f,0f,480f,10.00f,0f,470f,0.00f,0f,480f,0.00f,0f, 478f,2.00f,1f,478f,8.00f,1f,480f,10.00f,0f,478f,2.00f,1f,480f,10.00f,0f,480f,0.00f,0f, 472f,2f,1f,478f,2.00f,1f,480f,0.00f,0f,472f,2f,1f,480f,0.00f,0f,470f,0.00f,0f, 478f,8.00f,1f,472f,8.00f,1f,470f,10.00f,0f,478f,8.00f,1f,470f,10.00f,0f,480f,10.00f,0f, 472f,8.00f,1f,472f,2f,1f,470f,0.00f,0f,472f,8.00f,1f,470f,0.00f,0f,470f,10.00f,0f, 478f,2.00f,1f,472f,2f,1f,472f,8.00f,1f,478f,2.00f,1f,472f,8.00f,1f,478f,8.00f,1f, 478f,846f,1f,472f,846f,1f,472f,852f,1f,478f,846f,1f,472f,852f,1f,478f,852f,1f, 472f,852f,1f,472f,846f,1f,470f,844f,0f,472f,852f,1f,470f,844f,0f,470f,854f,0f, 478f,852f,1f,472f,852f,1f,470f,854f,0f,478f,852f,1f,470f,854f,0f,480f,854f,0f, 472f,846f,1f,478f,846f,1f,480f,844f,0f,472f,846f,1f,480f,844f,0f,470f,844f,0f, 478f,846f,1f,478f,852f,1f,480f,854f,0f,478f,846f,1f,480f,854f,0f,480f,844f,0f, 480f,854f,0f,470f,854f,0f,470f,844f,0f,480f,854f,0f,470f,844f,0f,480f,844f,0f, 10.00f,854f,0f,0.00f,854f,0f,0.00f,844f,0f,10.00f,854f,0f,0.00f,844f,0f,10.00f,844f,0f, 8.00f,846f,1f,8.00f,852f,1f,10.00f,854f,0f,8.00f,846f,1f,10.00f,854f,0f,10.00f,844f,0f, 2f,846f,1f,8.00f,846f,1f,10.00f,844f,0f,2f,846f,1f,10.00f,844f,0f,0.00f,844f,0f, 8.00f,852f,1f,2.00f,852f,1f,0.00f,854f,0f,8.00f,852f,1f,0.00f,854f,0f,10.00f,854f,0f, 2.00f,852f,1f,2f,846f,1f,0.00f,844f,0f,2.00f,852f,1f,0.00f,844f,0f,0.00f,854f,0f, 8.00f,846f,1f,2f,846f,1f,2.00f,852f,1f,8.00f,846f,1f,2.00f,852f,1f,8.00f,852f,1f, 6f,846f,1f,4f,846f,1f,4f,8f,1f,6f,846f,1f,4f,8f,1f,6f,8f,1f, 6f,846f,1f,6f,8f,1f,7f,10f,0f,6f,846f,1f,7f,10f,0f,7f,844f,0f, 4f,8f,1f,4f,846f,1f,3f,844f,0f,4f,8f,1f,3f,844f,0f,3f,10f,0f, 474f,8f,1f,474f,846f,1f,473f,844f,0f,474f,8f,1f,473f,844f,0f,473f,10f,0f, 476f,846f,1f,476f,8f,1f,477f,10f,0f,476f,846f,1f,477f,10f,0f,477f,844f,0f, 476f,846f,1f,474f,846f,1f,474f,8f,1f,476f,846f,1f,474f,8f,1f,476f,8f,1f, 130f,10.00f,0f,120f,10.00f,0f,120f,0.00f,0f,130f,10.00f,0f,120f,0.00f,0f,130f,0.00f,0f, 128f,2.00f,1f,128f,8.00f,1f,130f,10.00f,0f,128f,2.00f,1f,130f,10.00f,0f,130f,0.00f,0f, 122f,2f,1f,128f,2.00f,1f,130f,0.00f,0f,122f,2f,1f,130f,0.00f,0f,120f,0.00f,0f, 128f,8.00f,1f,122f,8.00f,1f,120f,10.00f,0f,128f,8.00f,1f,120f,10.00f,0f,130f,10.00f,0f, 122f,8.00f,1f,122f,2f,1f,120f,0.00f,0f,122f,8.00f,1f,120f,0.00f,0f,120f,10.00f,0f, 128f,2.00f,1f,122f,2f,1f,122f,8.00f,1f,128f,2.00f,1f,122f,8.00f,1f,128f,8.00f,1f, 352f,8.00f,1f,358f,8.00f,1f,358f,2.00f,1f,352f,8.00f,1f,358f,2.00f,1f,352f,2.00f,1f, 358f,2.00f,1f,358f,8.00f,1f,360f,10.00f,0f,358f,2.00f,1f,360f,10.00f,0f,360f,0.00f,0f, 352f,2.00f,1f,358f,2.00f,1f,360f,0.00f,0f,352f,2.00f,1f,360f,0.00f,0f,350f,0.00f,0f, 358f,8.00f,1f,352f,8.00f,1f,350f,10.00f,0f,358f,8.00f,1f,350f,10.00f,0f,360f,10.00f,0f, 352f,8.00f,1f,352f,2.00f,1f,350f,0.00f,0f,352f,8.00f,1f,350f,0.00f,0f,350f,10.00f,0f, 350f,0.00f,0f,360f,0.00f,0f,360f,10.00f,0f,350f,0.00f,0f,360f,10.00f,0f,350f,10.00f,0f, 358f,6.00f,1f,472f,6.00f,1f,470f,7.00f,0f,358f,6.00f,1f,470f,7.00f,0f,360f,7.00f,0f, 472f,4.00f,1f,358f,4.00f,1f,360f,3.00f,0f,472f,4.00f,1f,360f,3.00f,0f,470f,3.00f,0f, 472f,4.00f,1f,472f,6.00f,1f,358f,6.00f,1f,472f,4.00f,1f,358f,6.00f,1f,358f,4.00f,1f, 472f,848f,1f,472f,850f,1f,358f,850f,1f,472f,848f,1f,358f,850f,1f,358f,848f,1f, 472f,848f,1f,358f,848f,1f,360f,847f,0f,472f,848f,1f,360f,847f,0f,470f,847f,0f, 358f,850f,1f,472f,850f,1f,470f,851f,0f,358f,850f,1f,470f,851f,0f,360f,851f,0f, 350f,844f,0f,360f,844f,0f,360f,854f,0f,350f,844f,0f,360f,854f,0f,350f,854f,0f, 352f,852f,1f,352f,846f,1f,350f,844f,0f,352f,852f,1f,350f,844f,0f,350f,854f,0f, 358f,852f,1f,352f,852f,1f,350f,854f,0f,358f,852f,1f,350f,854f,0f,360f,854f,0f, 352f,846f,1f,358f,846f,1f,360f,844f,0f,352f,846f,1f,360f,844f,0f,350f,844f,0f, 358f,846f,1f,358f,852f,1f,360f,854f,0f,358f,846f,1f,360f,854f,0f,360f,844f,0f, 352f,852f,1f,358f,852f,1f,358f,846f,1f,352f,852f,1f,358f,846f,1f,352f,846f,1f, 128f,846f,1f,122f,846f,1f,122f,852f,1f,128f,846f,1f,122f,852f,1f,128f,852f,1f, 122f,852f,1f,122f,846f,1f,120f,844f,0f,122f,852f,1f,120f,844f,0f,120f,854f,0f, 128f,852f,1f,122f,852f,1f,120f,854f,0f,128f,852f,1f,120f,854f,0f,130f,854f,0f, 122f,846f,1f,128f,846f,1f,130f,844f,0f,122f,846f,1f,130f,844f,0f,120f,844f,0f, 128f,846f,1f,128f,852f,1f,130f,854f,0f,128f,846f,1f,130f,854f,0f,130f,844f,0f, 130f,854f,0f,120f,854f,0f,120f,844f,0f,130f,854f,0f,120f,844f,0f,130f,844f,0f, 122f,848f,1f,8f,848f,1f,10f,847f,0f,122f,848f,1f,10f,847f,0f,120f,847f,0f, 8f,850f,1f,122f,850f,1f,120f,851f,0f,8f,850f,1f,120f,851f,0f,10f,851f,0f, 8f,850f,1f,8f,848f,1f,122f,848f,1f,8f,850f,1f,122f,848f,1f,122f,850f,1f, 10f,847f,0f,120f,847f,0f,124.96f,829.63f,-0.50f,10f,847f,0f,124.96f,829.63f,-0.50f,19.51f,829.63f,-0.50f, 130f,844f,0f,130f,854f,0f,134.55f,836.34f,-0.50f,130f,844f,0f,134.55f,836.34f,-0.50f,134.55f,826.76f,-0.50f, 350f,844f,0f,350f,854f,0f,345.45f,836.34f,-0.50f,350f,844f,0f,345.45f,836.34f,-0.50f,345.45f,826.76f,-0.50f, 360f,847f,0f,470f,847f,0f,460.49f,829.63f,-0.50f,360f,847f,0f,460.49f,829.63f,-0.50f,355.04f,829.63f,-0.50f, 470f,7.00f,0f,360f,7.00f,0f,355.04f,24.37f,-0.50f,470f,7.00f,0f,355.04f,24.37f,-0.50f,460.49f,24.37f,-0.50f, 350f,10.00f,0f,350f,0.00f,0f,345.45f,17.66f,-0.50f,350f,10.00f,0f,345.45f,17.66f,-0.50f,345.45f,27.24f,-0.50f, 130f,10.00f,0f,130f,0.00f,0f,134.55f,17.66f,-0.50f,130f,10.00f,0f,134.55f,17.66f,-0.50f,134.55f,27.24f,-0.50f, 473f,844f,0f,473f,10f,0f,463.36f,27.24f,-0.50f,473f,844f,0f,463.36f,27.24f,-0.50f,463.36f,826.76f,-0.50f, 7f,10f,0f,7f,844f,0f,16.64f,826.76f,-0.50f,7f,10f,0f,16.64f,826.76f,-0.50f,16.64f,27.24f,-0.50f, 120f,7.00f,0f,10.00f,7.00f,0f,19.51f,24.37f,-0.50f,120f,7.00f,0f,19.51f,24.37f,-0.50f,124.96f,24.37f,-0.50f, 120f,7.00f,0f,130f,10.00f,0f,134.55f,27.24f,-0.50f,120f,7.00f,0f,134.55f,27.24f,-0.50f,124.96f,24.37f,-0.50f, 10.00f,7.00f,0f,7f,10f,0f,16.64f,27.24f,-0.50f,10.00f,7.00f,0f,16.64f,27.24f,-0.50f,19.51f,24.37f,-0.50f, 350f,10.00f,0f,360f,7.00f,0f,355.04f,24.37f,-0.50f,350f,10.00f,0f,355.04f,24.37f,-0.50f,345.45f,27.24f,-0.50f, 473f,10f,0f,470f,7.00f,0f,460.49f,24.37f,-0.50f,473f,10f,0f,460.49f,24.37f,-0.50f,463.36f,27.24f,-0.50f, 473f,844f,0f,470f,847f,0f,460.49f,829.63f,-0.50f,473f,844f,0f,460.49f,829.63f,-0.50f,463.36f,826.76f,-0.50f, 360f,847f,0f,350f,844f,0f,345.45f,826.76f,-0.50f,360f,847f,0f,345.45f,826.76f,-0.50f,355.04f,829.63f,-0.50f, 130f,844f,0f,120f,847f,0f,124.96f,829.63f,-0.50f,130f,844f,0f,124.96f,829.63f,-0.50f,134.55f,826.76f,-0.50f, 7f,844f,0f,10f,847f,0f,19.51f,829.63f,-0.50f,7f,844f,0f,19.51f,829.63f,-0.50f,16.64f,826.76f,-0.50f, 19.51f,829.63f,-0.50f,124.96f,829.63f,-0.50f,136.47f,789.37f,-2f,19.51f,829.63f,-0.50f,136.47f,789.37f,-2f,41.56f,789.37f,-2f, 134.55f,826.76f,-0.50f,134.55f,836.34f,-0.50f,145.09f,795.41f,-2f,134.55f,826.76f,-0.50f,145.09f,795.41f,-2f,145.09f,786.78f,-2f, 345.45f,826.76f,-0.50f,345.45f,836.34f,-0.50f,334.91f,795.41f,-2f,345.45f,826.76f,-0.50f,334.91f,795.41f,-2f,334.91f,786.78f,-2f, 355.04f,829.63f,-0.50f,460.49f,829.63f,-0.50f,438.44f,789.37f,-2f,355.04f,829.63f,-0.50f,438.44f,789.37f,-2f,343.53f,789.37f,-2f, 460.49f,24.37f,-0.50f,355.04f,24.37f,-0.50f,343.53f,64.63f,-2f,460.49f,24.37f,-0.50f,343.53f,64.63f,-2f,438.44f,64.63f,-2f, 345.45f,27.24f,-0.50f,345.45f,17.66f,-0.50f,334.91f,58.59f,-2f,345.45f,27.24f,-0.50f,334.91f,58.59f,-2f,334.91f,67.22f,-2f, 134.55f,27.24f,-0.50f,134.55f,17.66f,-0.50f,145.09f,58.59f,-2f,134.55f,27.24f,-0.50f,145.09f,58.59f,-2f,145.09f,67.22f,-2f, 463.36f,826.76f,-0.50f,463.36f,27.24f,-0.50f,441.03f,67.22f,-2f,463.36f,826.76f,-0.50f,441.03f,67.22f,-2f,441.03f,786.78f,-2f, 16.64f,27.24f,-0.50f,16.64f,826.76f,-0.50f,38.97f,786.78f,-2f,16.64f,27.24f,-0.50f,38.97f,786.78f,-2f,38.97f,67.22f,-2f, 124.96f,24.37f,-0.50f,19.51f,24.37f,-0.50f,41.56f,64.63f,-2f,124.96f,24.37f,-0.50f,41.56f,64.63f,-2f,136.47f,64.63f,-2f, 124.96f,24.37f,-0.50f,134.55f,27.24f,-0.50f,145.09f,67.22f,-2f,124.96f,24.37f,-0.50f,145.09f,67.22f,-2f,136.47f,64.63f,-2f, 19.51f,24.37f,-0.50f,16.64f,27.24f,-0.50f,38.97f,67.22f,-2f,19.51f,24.37f,-0.50f,38.97f,67.22f,-2f,41.56f,64.63f,-2f, 345.45f,27.24f,-0.50f,355.04f,24.37f,-0.50f,343.53f,64.63f,-2f,345.45f,27.24f,-0.50f,343.53f,64.63f,-2f,334.91f,67.22f,-2f, 463.36f,27.24f,-0.50f,460.49f,24.37f,-0.50f,438.44f,64.63f,-2f,463.36f,27.24f,-0.50f,438.44f,64.63f,-2f,441.03f,67.22f,-2f, 463.36f,826.76f,-0.50f,460.49f,829.63f,-0.50f,438.44f,789.37f,-2f,463.36f,826.76f,-0.50f,438.44f,789.37f,-2f,441.03f,786.78f,-2f, 355.04f,829.63f,-0.50f,345.45f,826.76f,-0.50f,334.91f,786.78f,-2f,355.04f,829.63f,-0.50f,334.91f,786.78f,-2f,343.53f,789.37f,-2f, 134.55f,826.76f,-0.50f,124.96f,829.63f,-0.50f,136.47f,789.37f,-2f,134.55f,826.76f,-0.50f,136.47f,789.37f,-2f,145.09f,786.78f,-2f, 16.64f,826.76f,-0.50f,19.51f,829.63f,-0.50f,41.56f,789.37f,-2f,16.64f,826.76f,-0.50f,41.56f,789.37f,-2f,38.97f,786.78f,-2f, }; private float[] backgroundData = new float[] { // # ,Scale, Speed, 300 , 1.05f, .001f, 150 , 1.07f, .002f, 075 , 1.10f, .003f, 040 , 1.12f, .006f, 20 , 1.15f, .012f, 10 , 1.25f, .025f, 05 , 1.50f, .050f, 3 , 2.00f, .100f, 2 , 3.00f, .200f, }; private float[] triangleCoords = new float[] { 0, -25, 0, -.75f, -1, 0, +.75f, -1, 0, 0, +2, 0, -.99f, -1, 0, .99f, -1, 0, }; private float[] triangleColors = new float[] { 1.0f, 1.0f, 1.0f, 0.05f, 1.0f, 1.0f, 1.0f, 0.5f, 1.0f, 1.0f, 1.0f, 0.5f, 1.0f, 1.0f, 1.0f, 1.0f, 1.0f, 1.0f, 1.0f, 0.5f, 1.0f, 1.0f, 1.0f, 0.5f, }; private float[] drawArray2; private FloatBuffer drawBuffer2; private float[] colorArray2; private static FloatBuffer colorBuffer; private static FloatBuffer triangleBuffer; private static FloatBuffer quadBuffer; private static FloatBuffer drawBuffer; private float[] backgroundVerts; private FloatBuffer backgroundVertsWrapped; private float[] backgroundColors; private Buffer backgroundColorsWraped; private FloatBuffer backgroundColorsWrapped; private FloatBuffer arenaWallsWrapped; private FloatBuffer arenaColorsWrapped; private FloatBuffer arena2VertsWrapped; private FloatBuffer arena2ColorsWrapped; private long wallHitStartTime; private int wallHitDrawTime; private FloatBuffer pixelVertsWrapped; private float[] wallHit; private FloatBuffer pixelColorsWrapped; //private float[] pitVerts; private Resources lResources; private FloatBuffer pitVertsWrapped; private FloatBuffer pitColorsWrapped; private boolean arena2; private long lastStartTime; private long startTime; private int state=1; private long introEndTime; protected long introTotalTime =8000; protected long introStartTime; private boolean initDone= false; private static int stateIntro = 0; private static int stateGame = 1; public GlRenderer(spacehockey nspacehockey) { lResources = nspacehockey.getResources(); nspacehockey.SetHandlerToGLRenderer(new Handler() { @Override public void handleMessage(Message m) { if (m.what ==0){ wallHit = m.getData().getFloatArray("wall hit"); wallHitStartTime =System.currentTimeMillis(); wallHitDrawTime = 1000; }else if (m.what ==1){ //state = stateIntro; introEndTime= System.currentTimeMillis()+introTotalTime ; introStartTime = System.currentTimeMillis(); } }}); } public void onSurfaceCreated(GL10 gl, EGLConfig config) { gl.glShadeModel(GL10.GL_SMOOTH); gl.glClearColor(.01f, .01f, .01f, .1f); gl.glClearDepthf(1.0f); gl.glEnable(GL10.GL_DEPTH_TEST); gl.glDepthFunc(GL10.GL_LEQUAL); gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); } private float SumOfStrideI(float[] data, int offset, int stride) { int sum= 0; for (int i=offset;i<data.length-1;i=i+stride){ sum = (int) (data[i]+sum); } return sum; } public void onDrawFrame(GL10 gl) { if (state== stateIntro){DrawIntro(gl);} if (state== stateGame){DrawGame(gl);} } private void DrawIntro(GL10 gl) { startTime = System.currentTimeMillis(); if (startTime< introEndTime){ float ptd = (float)(startTime- introStartTime)/(float)introTotalTime; float ptl = 1-ptd; gl.glClear(GL10.GL_COLOR_BUFFER_BIT);//dont move gl.glMatrixMode(GL10.GL_MODELVIEW); int setVertOff = 0; gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glColorPointer(4, GL10.GL_FLOAT, 0, backgroundColorsWrapped); for (int i = 0; i < backgroundData.length / 3; i = i + 1) { int setoff = i * 3; int setVertLen = (int) backgroundData[setoff]; yoffs[i] = (backgroundData[setoff + 2]*(90+(ptl*250))) + yoffs[i]; if (yoffs[i] > Height) {yoffs[i] = 0;} gl.glPushMatrix(); //gl.glTranslatef(0, -(Height/2), 0); //gl.glScalef(1f, 1f+(ptl*2), 1f); //gl.glTranslatef(0, +(Height/2), 0); gl.glTranslatef(0, yoffs[i], i+60); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, backgroundVertsWrapped); gl.glDrawArrays(GL10.GL_TRIANGLES, (setVertOff * 2 * 3) - 0, (setVertLen * 2 * 3) - 1); gl.glTranslatef(0, -Height, 0); gl.glDrawArrays(GL10.GL_TRIANGLES, (setVertOff * 2 * 3) - 0, (setVertLen * 2 * 3) - 1); setVertOff = (int) (setVertOff + setVertLen); gl.glPopMatrix(); } gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); }else{state = stateGame;} } private void DrawGame(GL10 gl) { lastStartTime = startTime; startTime = System.currentTimeMillis(); long moveTime = startTime-lastStartTime; gl.glClear(GL10.GL_COLOR_BUFFER_BIT);//dont move gl.glMatrixMode(GL10.GL_MODELVIEW); int setVertOff = 0; gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glColorPointer(4, GL10.GL_FLOAT, 0, backgroundColorsWrapped); for (int i = 0; i < backgroundData.length / 3; i = i + 1) { int setoff = i * 3; int setVertLen = (int) backgroundData[setoff]; yoffs[i] = (backgroundData[setoff + 2]*moveTime) + yoffs[i]; if (yoffs[i] > Height) {yoffs[i] = 0;} gl.glPushMatrix(); gl.glTranslatef(0, yoffs[i], i+60); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, backgroundVertsWrapped); gl.glDrawArrays(GL10.GL_TRIANGLES, (setVertOff * 6) - 0, (setVertLen *6) - 1); gl.glTranslatef(0, -Height, 0); gl.glDrawArrays(GL10.GL_TRIANGLES, (setVertOff * 6) - 0, (setVertLen *6) - 1); setVertOff = (int) (setVertOff + setVertLen); gl.glPopMatrix(); } //arena frame gl.glPushMatrix(); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, arenaWallsWrapped); gl.glColorPointer(4, GL10.GL_FLOAT, 0, arenaColorsWrapped); gl.glColor4f(.1f, .5f, 1f, 1f); gl.glTranslatef(0, 0, 50); gl.glDrawArrays(GL10.GL_TRIANGLES, 0, (int)(arenaWalls.length / 3)); gl.glPopMatrix(); //arena2 frame if (arena2 == true){ gl.glLoadIdentity(); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, pitVertsWrapped); gl.glColorPointer(4, GL10.GL_FLOAT, 0, pitColorsWrapped); gl.glTranslatef(0, -Height, 40); gl.glDrawArrays(GL10.GL_TRIANGLES, 0, (int)(pitVertsWrapped.capacity() / 3)); } if (wallHitStartTime != 0) { float timeRemaining = (wallHitStartTime + wallHitDrawTime)-System.currentTimeMillis(); if (timeRemaining>0) { gl.glPushMatrix(); float percentDone = 1-(timeRemaining/wallHitDrawTime); gl.glLoadIdentity(); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, pixelVertsWrapped); gl.glColorPointer(4, GL10.GL_FLOAT, 0, pixelColorsWrapped); gl.glTranslatef(wallHit[0], wallHit[1], 0); gl.glScalef(8, Height*percentDone, 0); gl.glDrawArrays(GL10.GL_TRIANGLES, 0, 12); gl.glPopMatrix(); } else { wallHitStartTime = 0; } } gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } public void init(GL10 gl) { if (arena2 == true) { AssetManager assetManager = lResources.getAssets(); try { // byte[] ba = {111,111}; DataInputStream Dis = new DataInputStream(assetManager .open("arena2.ogl")); pitVertsWrapped = LoadFloatArray.FromDataInputStream(Dis); pitColorsWrapped = MakeFakeLighting(pitVertsWrapped.array(), .25f, .50f, 1f, 200, .5f); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } if ((Height != 854) || (Width != 480)) { arenaWalls = ScaleFloats(arenaWalls, Width / 480f, Height / 854f); } arenaWallsWrapped = FloatBuffer.wrap(arenaWalls); arenaColorsWrapped = MakeFakeLighting(arenaWalls, .03f, .16f, .33f, .33f, 3); pixelVertsWrapped = FloatBuffer.wrap(pixelVerts); pixelColorsWrapped = MakeFakeLighting(pixelVerts, .03f, .16f, .33f, .10f, 20); initDone=true; } public void onSurfaceChanged(GL10 gl, int nwidth, int nheight) { Width= nwidth; Height = nheight; // avoid division by zero if (Height == 0) Height = 1; // draw on the entire screen gl.glViewport(0, 0, Width, Height); // setup projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); gl.glLoadIdentity(); gl.glOrthof(0, Width, Height, 0, 100, -100); // gl.glOrthof(-nwidth*2, nwidth*2, nheight*2,-nheight*2, 100, -100); // GLU.gluPerspective(gl, 180.0f, (float)nwidth / (float)nheight, // 1000.0f, -1000.0f); gl.glEnable(GL10.GL_BLEND); gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); System.gc(); if (initDone == false){ SetupStars(); init(gl); } } public void SetupStars(){ backgroundVerts = new float[(int) SumOfStrideI(backgroundData,0,3)*triangleCoords.length]; backgroundColors = new float[(int) SumOfStrideI(backgroundData,0,3)*triangleColors.length]; int iii=0; int vc=0; float ascale=1; for (int i=0;i<backgroundColors.length-1;i=i+1){ if (iii==0){ascale = (float) Math.random();} if (vc==3){ backgroundColors[i]= (float) (triangleColors[iii]*(ascale)); }else if(vc==2){ backgroundColors[i]= (float) (triangleColors[iii]-(Math.random()*.2)); }else{ backgroundColors[i]= (float) (triangleColors[iii]-(Math.random()*.3)); } iii=iii+1;if (iii> triangleColors.length-1){iii=0;} vc=vc+1; if (vc>3){vc=0;} } int ii=0; int i =0; int set =0; while(ii<backgroundVerts.length-1){ float scale = (float) backgroundData[(set*3)+1]; int length= (int) backgroundData[(set*3)]; for (i=0;i<length;i=i+1){ if (set ==0){ AddVertsToArray(ScaleFloats(triangleCoords, scale,scale*.25f), backgroundVerts, (float)(Math.random()*Width),(float) (Math.random()*Height), ii); }else{ AddVertsToArray(ScaleFloats(triangleCoords, scale), backgroundVerts, (float)(Math.random()*Width),(float) (Math.random()*Height), ii);} ii=ii+triangleCoords.length; } set=set+1; } backgroundVertsWrapped = FloatBuffer.wrap(backgroundVerts); backgroundColorsWrapped = FloatBuffer.wrap(backgroundColors); } public void AddVertsToArray(float[] sva,float[]dva,float ox,float oy,int start){ //x for (int i=0;i<sva.length;i=i+3){ if((start+i)<dva.length){dva[start+i]= sva[i]+ox;} } //y for (int i=1;i<sva.length;i=i+3){ if((start+i)<dva.length){dva[start+i]= sva[i]+oy;} } //z for (int i=2;i<sva.length;i=i+3){ if((start+i)<dva.length){dva[start+i]= sva[i];} } } public FloatBuffer MakeFakeLighting(float[] sa,float r, float g,float b,float a,float multby){ float[] da = new float[((sa.length/3)*4)]; int vertex=0; for (int i=0;i<sa.length;i=i+3){ if (sa[i+2]>=1){ da[(vertex*4)+0]= r*multby*sa[i+2]; da[(vertex*4)+1]= g*multby*sa[i+2]; da[(vertex*4)+2]= b*multby*sa[i+2]; da[(vertex*4)+3]= a*multby*sa[i+2]; }else if (sa[i+2]<=-1){ float divisor = (multby*(-sa[i+2])); da[(vertex*4)+0]= r / divisor; da[(vertex*4)+1]= g / divisor; da[(vertex*4)+2]= b / divisor; da[(vertex*4)+3]= a / divisor; }else{ da[(vertex*4)+0]= r; da[(vertex*4)+1]= g; da[(vertex*4)+2]= b; da[(vertex*4)+3]= a; } vertex = vertex+1; } return FloatBuffer.wrap(da); } public float[] ScaleFloats(float[] va,float s){ float[] reta= new float[va.length]; for (int i=0;i<va.length;i=i+1){ reta[i]=va[i]*s; } return reta; } public float[] ScaleFloats(float[] va,float sx,float sy){ float[] reta= new float[va.length]; int cnt = 0; for (int i=0;i<va.length;i=i+1){ if (cnt==0){reta[i]=va[i]*sx;} else if (cnt==1){reta[i]=va[i]*sy;} else if (cnt==2){reta[i]=va[i];} cnt = cnt +1;if (cnt>2){cnt=0;} } return reta; } }

  Read the article

• Why SELECT N + 1 with no foreign keys and LINQ?

  - by Daniel Flöijer

  I have a database that unfortunately have no real foreign keys (I plan to add this later, but prefer not to do it right now to make migration easier). I have manually written domain objects that map to the database to set up relationships (following this tutorial http://www.codeproject.com/Articles/43025/A-LINQ-Tutorial-Mapping-Tables-to-Objects), and I've finally gotten the code to run properly. However, I've noticed I now have the SELECT N + 1 problem. Instead of selecting all Product's they're selected one by one with this SQL: SELECT [t0].[id] AS [ProductID], [t0].[Name], [t0].[info] AS [Description] FROM [products] AS [t0] WHERE [t0].[id] = @p0 -- @p0: Input Int (Size = -1; Prec = 0; Scale = 0) [65] Controller: public ViewResult List(string category, int page = 1) { var cat = categoriesRepository.Categories.SelectMany(c => c.LocalizedCategories).Where(lc => lc.CountryID == 1).First(lc => lc.Name == category).Category; var productsToShow = cat.Products; var viewModel = new ProductsListViewModel { Products = productsToShow.Skip((page - 1) * PageSize).Take(PageSize).ToList(), PagingInfo = new PagingInfo { CurrentPage = page, ItemsPerPage = PageSize, TotalItems = productsToShow.Count() }, CurrentCategory = cat }; return View("List", viewModel); } Since I wasn't sure if my LINQ expression was correct I tried to just use this but I still got N+1: var cat = categoriesRepository.Categories.First(); Domain objects: [Table(Name = "products")] public class Product { [Column(Name = "id", IsPrimaryKey = true, IsDbGenerated = true, AutoSync = AutoSync.OnInsert)] public int ProductID { get; set; } [Column] public string Name { get; set; } [Column(Name = "info")] public string Description { get; set; } private EntitySet<ProductCategory> _productCategories = new EntitySet<ProductCategory>(); [System.Data.Linq.Mapping.Association(Storage = "_productCategories", OtherKey = "productId", ThisKey = "ProductID")] private ICollection<ProductCategory> ProductCategories { get { return _productCategories; } set { _productCategories.Assign(value); } } public ICollection<Category> Categories { get { return (from pc in ProductCategories select pc.Category).ToList(); } } } [Table(Name = "products_menu")] class ProductCategory { [Column(IsPrimaryKey = true, Name = "products_id")] private int productId; private EntityRef<Product> _product = new EntityRef<Product>(); [System.Data.Linq.Mapping.Association(Storage = "_product", ThisKey = "productId")] public Product Product { get { return _product.Entity; } set { _product.Entity = value; } } [Column(IsPrimaryKey = true, Name = "products_types_id")] private int categoryId; private EntityRef<Category> _category = new EntityRef<Category>(); [System.Data.Linq.Mapping.Association(Storage = "_category", ThisKey = "categoryId")] public Category Category { get { return _category.Entity; } set { _category.Entity = value; } } } [Table(Name = "products_types")] public class Category { [Column(Name = "id", IsPrimaryKey = true, IsDbGenerated = true, AutoSync = AutoSync.OnInsert)] public int CategoryID { get; set; } private EntitySet<ProductCategory> _productCategories = new EntitySet<ProductCategory>(); [System.Data.Linq.Mapping.Association(Storage = "_productCategories", OtherKey = "categoryId", ThisKey = "CategoryID")] private ICollection<ProductCategory> ProductCategories { get { return _productCategories; } set { _productCategories.Assign(value); } } public ICollection<Product> Products { get { return (from pc in ProductCategories select pc.Product).ToList(); } } private EntitySet<LocalizedCategory> _LocalizedCategories = new EntitySet<LocalizedCategory>(); [System.Data.Linq.Mapping.Association(Storage = "_LocalizedCategories", OtherKey = "CategoryID")] public ICollection<LocalizedCategory> LocalizedCategories { get { return _LocalizedCategories; } set { _LocalizedCategories.Assign(value); } } } [Table(Name = "products_types_localized")] public class LocalizedCategory { [Column(Name = "id", IsPrimaryKey = true, IsDbGenerated = true, AutoSync = AutoSync.OnInsert)] public int LocalizedCategoryID { get; set; } [Column(Name = "products_types_id")] private int CategoryID; private EntityRef<Category> _Category = new EntityRef<Category>(); [System.Data.Linq.Mapping.Association(Storage = "_Category", ThisKey = "CategoryID")] public Category Category { get { return _Category.Entity; } set { _Category.Entity = value; } } [Column(Name = "country_id")] public int CountryID { get; set; } [Column] public string Name { get; set; } } I've tried to comment out everything from my View, so nothing there seems to influence this. The ViewModel is as simple as it looks, so shouldn't be anything there. When reading this ( http://www.hookedonlinq.com/LinqToSQL5MinuteOVerview.ashx) I started suspecting it might be because I have no real foreign keys in the database and that I might need to use manual joins in my code. Is that correct? How would I go about it? Should I remove my mapping code from my domain model or is it something that I need to add/change to it? Note: I've stripped parts of the code out that I don't think is relevant to make it cleaner for this question. Please let me know if something is missing.

  Read the article

• How should I implement simple caches with concurrency on Redis?

  - by solublefish

  Background I have a 2-tier web service - just my app server and an RDBMS. I want to move to a pool of identical app servers behind a load balancer. I currently cache a bunch of objects in-process. I hope to move them to a shared Redis. I have a dozen or so caches of simple, small-sized business objects. For example, I have a set of Foos. Each Foo has a unique FooId and an OwnerId. One "owner" may own multiple Foos. In a traditional RDBMS this is just a table with an index on the PK FooId and one on OwnerId. I'm caching this in one process simply: Dictionary<int,Foo> _cacheFooById; Dictionary<int,HashSet<int>> _indexFooIdsByOwnerId; Reads come straight from here, and writes go here and to the RDBMS. I usually have this invariant: "For a given group [say by OwnerId], the whole group is in cache or none of it is." So when I cache miss on a Foo, I pull that Foo and all the owner's other Foos from the RDBMS. Updates make sure to keep the index up to date and respect the invariant. When an owner calls GetMyFoos I never have to worry that some are cached and some aren't. What I did already The first/simplest answer seems to be to use plain ol' SET and GET with a composite key and json value: SET( "ServiceCache:Foo:" + theFoo.Id, JsonSerialize(theFoo)); I later decided I liked: HSET( "ServiceCache:Foo", theFoo.FooId, JsonSerialize(theFoo)); That lets me get all the values in one cache as HVALS. It also felt right - I'm literally moving hashtables to Redis, so perhaps my top-level items should be hashes. This works to first order. If my high-level code is like: UpdateCache(myFoo); AddToIndex(myFoo); That translates into: HSET ("ServiceCache:Foo", theFoo.FooId, JsonSerialize(theFoo)); var myFoos = JsonDeserialize( HGET ("ServiceCache:FooIndex", theFoo.OwnerId) ); myFoos.Add(theFoo.OwnerId); HSET ("ServiceCache:FooIndex", theFoo.OwnerId, JsonSerialize(myFoos)); However, this is broken in two ways. Two concurrent operations can read/modify/write at the same time. The latter "wins" the final HSET and the former's index update is lost. Another operation could read the index in between the first and second lines. It would miss a Foo that it should find. So how do I index properly? I think I could use a Redis set instead of a json-encoded value for the index. That would solve part of the problem since the "add-to-index-if-not-already-present" would be atomic. I also read about using MULTI as a "transaction" but it doesn't seem like it does what I want. Am I right that I can't really MULTI; HGET; {update}; HSET; EXEC since it doesn't even do the HGET before I issue the EXEC? I also read about using WATCH and MULTI for optimistic concurrency, then retrying on failure. But WATCH only works on top-level keys. So it's back to SET/GET instead of HSET/HGET. And now I need a new index-like-thing to support getting all the values in a given cache. If I understand it right, I can combine all these things to do the job. Something like: while(!succeeded) { WATCH( "ServiceCache:Foo:" + theFoo.FooId ); WATCH( "ServiceCache:FooIndexByOwner:" + theFoo.OwnerId ); WATCH( "ServiceCache:FooIndexAll" ); MULTI(); SET ("ServiceCache:Foo:" + theFoo.FooId, JsonSerialize(theFoo)); SADD ("ServiceCache:FooIndexByOwner:" + theFoo.OwnerId, theFoo.FooId); SADD ("ServiceCache:FooIndexAll", theFoo.FooId); EXEC(); //TODO somehow set succeeded properly } Finally I'd have to translate this pseudocode into real code depending how my client library uses WATCH/MULTI/EXEC; it looks like they need some sort of context to hook them together. All in all this seems like a lot of complexity for what has to be a very common case; I can't help but think there's a better, smarter, Redis-ish way to do things that I'm just not seeing. How do I lock properly? Even if I had no indexes, there's still a (probably rare) race condition. A: HGET - cache miss B: HGET - cache miss A: SELECT B: SELECT A: HSET C: HGET - cache hit C: UPDATE C: HSET B: HSET ** this is stale data that's clobbering C's update. Note that C could just be a really-fast A. Again I think WATCH, MULTI, retry would work, but... ick. I know in some places people use special Redis keys as locks for other objects. Is that a reasonable approach here? Should those be top-level keys like ServiceCache:FooLocks:{Id} or ServiceCache:Locks:Foo:{Id}? Or make a separate hash for them - ServiceCache:Locks with subkeys Foo:{Id}, or ServiceCache:Locks:Foo with subkeys {Id} ? How would I work around abandoned locks, say if a transaction (or a whole server) crashes while "holding" the lock?

  Read the article

• Setting a Visual State from a data bound enum in WPF

  - by firoso

  Hey all, I've got a scenario where I want to switch the visiblity of 4 different content controls. The visual states I have set opacity, and collapsed based on each given state (See code.) What I'd like to do is have the visual state bound to a property of my View Model of type Enum. I tried using DataStateBehavior, but it requires true/false, which doesn't work for me. So I tried DataStateSwitchBehavior, which seems to be totally broken for WPF4 from what I could tell. Is there a better way to be doing this? I'm really open to different approaches if need be, but I'd really like to keep this enum in the equation. Edit: The code shouldn't be too important, I just need to know if there's a well known solution to this problem. <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:Custom="http://schemas.microsoft.com/expression/2010/interactivity" xmlns:ei="http://schemas.microsoft.com/expression/2010/interactions" xmlns:ee="http://schemas.microsoft.com/expression/2010/effects" xmlns:customBehaviors="clr-namespace:SEL.MfgTestDev.ESS.Behaviors" x:Class="SEL.MfgTestDev.ESS.View.PresenterControl" mc:Ignorable="d" d:DesignHeight="624" d:DesignWidth="1104" d:DataContext="{Binding ApplicationViewModel, Mode=OneWay, Source={StaticResource Locator}}"> <Grid> <Grid.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="Layout/TerminalViewTemplate.xaml"/> <ResourceDictionary Source="Layout/DebugViewTemplate.xaml"/> <ResourceDictionary Source="Layout/ProgressViewTemplate.xaml"/> <ResourceDictionary Source="Layout/LoadoutViewTemplate.xaml"/> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </Grid.Resources> <Custom:Interaction.Behaviors> <customBehaviors:DataStateSwitchBehavior Binding="{Binding ApplicationViewState}"> <customBehaviors:DataStateSwitchCase State="LoadoutState" Value="Loadout"/> </customBehaviors:DataStateSwitchBehavior> </Custom:Interaction.Behaviors> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="ApplicationStates" ei:ExtendedVisualStateManager.UseFluidLayout="True"> <VisualStateGroup.Transitions> <VisualTransition GeneratedDuration="0:0:1"> <VisualTransition.GeneratedEasingFunction> <SineEase EasingMode="EaseInOut"/> </VisualTransition.GeneratedEasingFunction> <ei:ExtendedVisualStateManager.TransitionEffect> <ee:SmoothSwirlGridTransitionEffect/> </ei:ExtendedVisualStateManager.TransitionEffect> </VisualTransition> </VisualStateGroup.Transitions> <VisualState x:Name="LoadoutState"> <Storyboard> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="LoadoutPage"> <EasingDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="LoadoutPage"> <DiscreteObjectKeyFrame KeyTime="0" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="ProgressState"> <Storyboard> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ProgressPage"> <EasingDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="ProgressPage"> <DiscreteObjectKeyFrame KeyTime="0" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="DebugState"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="DebugPage"> <DiscreteObjectKeyFrame KeyTime="0" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="DebugPage"> <EasingDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="TerminalState"> <Storyboard> <ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Visibility)" Storyboard.TargetName="TerminalPage"> <DiscreteObjectKeyFrame KeyTime="0" Value="{x:Static Visibility.Visible}"/> </ObjectAnimationUsingKeyFrames> <DoubleAnimationUsingKeyFrames Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="TerminalPage"> <EasingDoubleKeyFrame KeyTime="0" Value="1"/> </DoubleAnimationUsingKeyFrames> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <ContentControl x:Name="LoadoutPage" ContentTemplate="{StaticResource LoadoutViewTemplate}" Opacity="0" Content="{Binding}" Visibility="Collapsed"/> <ContentControl x:Name="ProgressPage" ContentTemplate="{StaticResource ProgressViewTemplate}" Opacity="0" Content="{Binding}" Visibility="Collapsed"/> <ContentControl x:Name="DebugPage" ContentTemplate="{StaticResource DebugViewTemplate}" Opacity="0" Content="{Binding}" Visibility="Collapsed"/> <ContentControl x:Name="TerminalPage" ContentTemplate="{StaticResource TerminalViewTemplate}" Opacity="0" Content="{Binding}" Visibility="Collapsed"/> <TextBlock HorizontalAlignment="Left" TextWrapping="Wrap" VerticalAlignment="Top" Text="{Binding ApplicationViewState}"> <TextBlock.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="Black" Offset="0"/> <GradientStop Color="White" Offset="1"/> </LinearGradientBrush> </TextBlock.Background> </TextBlock> </Grid>

  Read the article

• WebLogic job scheduling

  - by XpiritO

  Hello, overflowers :) I'm trying to implement a WebLogic job scheduling example, to test my cluster capabilities of fail-over on scheduled tasks (to ensure that these tasks are executed on fail over scenario). With this in mind, I've been following this example and trying to configure everything accordingly. Here are the steps I've done so far: Configured a cluster with 1 admin server (AdminServer) and 2 managed instances (Noddy and Snoopy); Set up database tables (using Oracle XE): ACTIVE and WEBLOGIC_TIMERS; Set up data source to access DB and associated it to the scheduling tasks under "Settings for cluster" "Scheduling"; Implemented a job (TimerListener) and a servlet to initialize the job scheduling, as follows: . package timedexecution; import java.io.IOException; import java.io.PrintWriter; import java.io.Serializable; import java.text.SimpleDateFormat; import java.util.Date; import javax.naming.InitialContext; import javax.naming.NamingException; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import commonj.timers.Timer; import commonj.timers.TimerListener; import commonj.timers.TimerManager; public class TimerServlet extends HttpServlet { private static final long serialVersionUID = 1L; protected static void logMessage(String message, PrintWriter out){ out.write("<p>"+ message +"</p>"); System.out.println(message); } @Override public void service(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { PrintWriter out = response.getWriter(); // out.println("<html>"); out.println("<head><title>TimerServlet</title></head>"); // try { // logMessage("service() entering try block to intialize the timer from JNDI", out); // InitialContext ic = new InitialContext(); TimerManager jobScheduler = (TimerManager)ic.lookup("weblogic.JobScheduler"); // logMessage("jobScheduler reference " + jobScheduler, out); // jobScheduler.schedule(new ExampleTimerListener(), 0, 30*1000); // logMessage("Timer scheduled!", out); // //execute this job every 30 seconds logMessage("service() started the timer", out); // logMessage("Started the timer - status:", out); // } catch (NamingException ne) { String msg = ne.getMessage(); logMessage("Timer schedule failed!", out); logMessage(msg, out); } catch (Throwable t) { logMessage("service() error initializing timer manager with JNDI name weblogic.JobScheduler " + t,out); } // out.println("</body></html>"); out.close(); } private static class ExampleTimerListener implements Serializable, TimerListener { private static final long serialVersionUID = 8313912206357147939L; public void timerExpired(Timer timer) { SimpleDateFormat sdf = new SimpleDateFormat(); System.out.println( "timerExpired() called at " + sdf.format( new Date() ) ); } } } Then I executed the servlet to start the scheduling on the first managed instance (Noddy server), which returned as expected: (Servlet execution output) service() entering try block to intialize the timer from JNDI jobScheduler reference weblogic.scheduler.TimerServiceImpl@43b4c7 Timer scheduled! service() started the timer Started the timer - status: Which resulted in the creation of 2 rows in my DB tables: WEBLOGIC_TIMERS table state after servlet execution: "EDIT"; "TIMER_ID"; "LISTENER"; "START_TIME"; "INTERVAL"; "TIMER_MANAGER_NAME"; "DOMAIN_NAME"; "CLUSTER_NAME"; ""; "Noddy_1268653040156"; "[datatype]"; "1268653040156"; "30000"; "weblogic.JobScheduler"; "myCluster"; "Cluster" ACTIVE table state after servlet execution: "EDIT"; "SERVER"; "INSTANCE"; "DOMAINNAME"; "CLUSTERNAME"; "TIMEOUT"; ""; "service.SINGLETON_MASTER"; "6382071947583985002/Noddy"; "QRENcluster"; "Cluster"; "10.03.15" Although, the job is not executed as scheduled. It should print a message on the server's log output (Noddy.out file) with a timestamp, saying that the timer had expired. It doesn't. My log files state as follows: Admin server log (myCluster.log file): ####<15/Mar/2010 10H45m GMT> <Warning> <Cluster> <test-ad> <Noddy> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1268649925727> <BEA-000192> <No currently living server was found that could host TimerMaster. The server will retry in a few seconds.> Noddy server log (Noddy.out file): service() entering try block to intialize the timer from JNDI jobScheduler reference weblogic.scheduler.TimerServiceImpl@43b4c7 Timer scheduled! service() started the timer Started the timer - status: <15/Mar/2010 10H45m GMT> <Warning> <Cluster> <BEA-000192> <No currently living server was found that could host TimerMaster. The server will retry in a few seconds.> (Noddy.log file): ####<15/Mar/2010 11H24m GMT> <Info> <Common> <test-ad> <Noddy> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1268652270128> <BEA-000628> <Created "1" resources for pool "TxDataSourceOracle", out of which "1" are available and "0" are unavailable.> ####<15/Mar/2010 11H37m GMT> <Info> <Cluster> <test-ad> <Noddy> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1268653040226> <BEA-000182> <Job Scheduler created a job with ID Noddy_1268653040156 for TimerListener with description timedexecution.TimerServlet$ExampleTimerListener@2ce79a> ####<15/Mar/2010 11H39m GMT> <Info> <JDBC> <test-ad> <Noddy> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1268653166307> <BEA-001128> <Connection for pool "TxDataSourceOracle" closed.> Can anyone help me out discovering what's wrong with my configuration? Thanks in advance for your help!

  Read the article

• Android strange behavior with listview and custom cursor adapter

  - by Michael Little

  I have a problem with a list view and a custom cursor adapter and I just can't seem to figure out what is wrong with my code. Basically, in my activity I call initalize() that does a bunch of stuff to handle getting the proper data and initializing the listview. On first run of the activity you can see from the images that one of the items is missing from the list. If I go to another activity and go back to this activity the item that was missing shows up. I believe it has something to do with setContentView(R.layout.parent). If I move that to my initialize() then the item never shows up even when returning from another activity. So, for some reason, returning from another activity bypasses setContentView(R.layout.parent) and everything works fine. I know it's impossible for me to bypass setContentView(R.layout.parent) so I need to figure out what the problem is. Also, I did not include the layout because it is nothing more then two textviews. Also, the images I have attached do not show that the missing item is the last one on the list. Custom Cursor Adapter: public class CustomCursorAdapter extends SimpleCursorAdapter { private Context context; private int layout; public CustomCursorAdapter (Context context, int layout, Cursor c, String[] from, int[] to) { super(context, layout, c, from, to); this.context = context; this.layout = layout; } public View newView(Context context, Cursor cursor, ViewGroup parent) { LayoutInflater inflater = LayoutInflater.from(context); final View view = inflater.inflate(layout, parent, false); return view; } @Override public void bindView(View v, Context context, Cursor c) { if (c.getColumnName(0).matches("section")){ int nameCol = c.getColumnIndex("section"); String section = c.getString(nameCol); TextView section_text = (TextView) v.findViewById(R.id.text1); if ((section.length() > 0)) { section_text.setText(section); } else { //so we don't have an empty spot section_text.setText(""); section_text.setVisibility(2); section_text.setHeight(1); } } else if (c.getColumnName(0).matches("code")) { int nameCol = c.getColumnIndex("code"); String mCode = c.getString(nameCol); TextView code_text = (TextView) v.findViewById(R.id.text1); if (code_text != null) { int i = 167; byte[] data = {(byte) i}; String strSymbol = EncodingUtils.getString(data, "windows-1252"); mCode = strSymbol + " " + mCode; code_text.setText(mCode); code_text.setSingleLine(); } } if (c.getColumnName(1).matches("title")){ int nameCol = c.getColumnIndex("title"); String mTitle = c.getString(nameCol); TextView title_text = (TextView) v.findViewById(R.id.text2); if (title_text != null) { title_text.setText(mTitle); } } else if (c.getColumnName(1).matches("excerpt")) { int nameCol = c.getColumnIndex("excerpt"); String mExcerpt = c.getString(nameCol); TextView excerpt_text = (TextView) v.findViewById(R.id.text2); if (excerpt_text != null) { excerpt_text.setText(mExcerpt); excerpt_text.setSingleLine(); } } } The Activity: public class parent extends ListActivity { private static String[] TITLE_FROM = { SECTION, TITLE, _ID, }; private static String[] CODE_FROM = { CODE, EXCERPT, _ID, }; private static String ORDER_BY = _ID + " ASC"; private static int[] TO = { R.id.text1, R.id.text2, }; String breadcrumb = null; private MyData data; private SQLiteDatabase db; CharSequence parent_id = ""; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); data = new MyData(this); db = data.getReadableDatabase(); setContentView(R.layout.parent); initialize(); } public void initialize() { breadcrumb = null; Bundle bun = getIntent().getExtras(); TextView tvBreadCrumb; tvBreadCrumb = (TextView)findViewById(R.id.breadcrumb); if (bun == null) { //this is the first run tvBreadCrumb.setText(null); tvBreadCrumb.setHeight(0); parent_id = "0"; try { Cursor cursor = getData(parent_id); showSectionData(cursor); } finally { data.close(); } } else { CharSequence state = bun.getString("state"); breadcrumb = bun.getString("breadcrumb"); tvBreadCrumb.setText(breadcrumb); CharSequence code = bun.getString("code"); parent_id = code; if (state.equals("chapter")) { try { Cursor cursor = getData(parent_id); showSectionData(cursor); } finally { data.close(); } } else if (state.equals("code")) { try { Cursor cursor = getCodeData(parent_id); showCodeData(cursor); } finally { data.close(); } } } } @Override public void onStart() { //initialize(); super.onResume(); } @Override public void onResume() { initialize(); super.onResume(); } private Cursor getData(CharSequence parent_id) { Cursor cTitles = db.query(TITLES_TABLE_NAME, TITLE_FROM, "parent_id = " + parent_id, null, null, null, ORDER_BY); Cursor cCodes = db.query(CODES_TABLE_NAME, CODE_FROM, "parent_id = " + parent_id, null, null, null, ORDER_BY); Cursor[] c = {cTitles, cCodes}; Cursor cursor = new MergeCursor(c); startManagingCursor(cursor); return cursor; } private Cursor getCodeData(CharSequence parent_id2) { Bundle bun = getIntent().getExtras(); CharSequence intent = bun.getString("intent"); CharSequence searchtype = bun.getString("searchtype"); //SQLiteDatabase db = data.getReadableDatabase(); if (intent != null) { String sWhere = null; if(searchtype.equals("code")) { sWhere = "code LIKE '%"+parent_id2+"%'"; } else if(searchtype.equals("within")){ sWhere = "definition LIKE '%"+parent_id2+"%'"; } //This is a search request Cursor cursor = db.query(CODES_TABLE_NAME, CODE_FROM, sWhere, null, null, null, ORDER_BY); startManagingCursor(cursor); return cursor; } else { Cursor cursor = db.query(CODES_TABLE_NAME, CODE_FROM, "parent_id = "+ parent_id2, null, null, null, ORDER_BY); startManagingCursor(cursor); return cursor; } } private void showSectionData(Cursor cursor) { CustomCursorAdapter adapter= new CustomCursorAdapter(this, R.layout.item, cursor, TITLE_FROM, TO); setListAdapter(adapter); } private void showCodeData(Cursor cursor) { CustomCursorAdapter adapter = new CustomCursorAdapter(this, R.layout.item, cursor, CODE_FROM, TO); setListAdapter(adapter); Bundle bun = getIntent().getExtras(); CharSequence intent = bun.getString("intent"); if (intent != null) { Cursor cursor1 = ((CursorAdapter)getListAdapter()).getCursor(); startManagingCursor(cursor1); TextView tvBreadCrumb; tvBreadCrumb = (TextView)findViewById(R.id.breadcrumb); tvBreadCrumb.setText(cursor1.getCount() + " Records Found"); //cursor1.close(); //mdl } }

  Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >