Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 399/534 | < Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >

  • Kernel panic on reboot after failed logical volume resize

    - by Derek
    I attempted to do a logical volume resize yesterday using the follwoing commands $sudo pvdisplay "/dev/sda8" is a new physical volume of "113.11 GiB" --- NEW Physical volume --- PV Name /dev/sda8 VG Name PV Size 113.11 GiB Allocatable NO PE Size 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID jwyO1o-b2ap-CW51-kx7O-kf26-arim-SM8V6m $sudo vgextend vg /dev/sda8 sudo vgdisplay vg --- Volume group --- VG Name vg System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 9 VG Access read/write VG Status resizable MAX LV 0 Cur LV 5 Open LV 5 Max PV 0 Cur PV 2 Act PV 2 VG Size 131.74 GiB PE Size 4.00 MiB Total PE 33725 Alloc PE / Size 4769 / 18.63 GiB Free PE / Size 28956 / 113.11 GiB VG UUID AhusW2-pzFv-3W32-mpv2-s5VG-FN7S-kVSadx $sudo lvresize -L +20GB /dev/mapper/vg-var So as you can see, it looks like adding the physical volume to the vg worked, because i see free space available there. When I typed the lvresize command, it never returned. I let this run overnight in the background, but this morning I still couldnt successfully do a "pvdisplay" or "lvdisplay" because I think it was waiting on a lock or something, so the command never returned. When i went to log onto the server's console, I saw a bunch of messages like: rcu_sched_state detected stall on cpu 2 Now when I boot, I get a kernel panic error, and a message about not being able to mount /mapper/vg-root cannot open root device "mapper/vg-root" or unknown_block(0,0) Kernel Panic -not syncing: VFS: Unable to mount root file system on unknown_block(0,0) What should I do to get my system back up and running? Did I attempt to do the logical volume resize correctly? Thanks

    Read the article

  • Cannot establish Wired connection on Acer Aspire 5930G

    - by drakos46
    I use an Acer Aspire 5930G, dual booted with Windows 7 and Ubuntu 13.10. My problem is that i cannot establish wired connection on my ubuntu. Wireless connection works in both of my OSs but the Wired connection does not, only on the Ubuntu. I have already tried the common fix: echo on | sudo tee /sys/class/net/eth0/device/power/control but without any results. Any ideas? eth0 Link encap:Ethernet HWaddr 00:1d:72:c2:21:a5 inet6 addr: fe80::21d:72ff:fec2:21a5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:945 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:204318 (204.3 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:7241 errors:0 dropped:0 overruns:0 frame:0 TX packets:7241 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:645874 (645.8 KB) TX bytes:645874 (645.8 KB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:57:7b:cc inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::216:eaff:fe57:7bcc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:19937 errors:0 dropped:0 overruns:0 frame:0 TX packets:16933 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10877245 (10.8 MB) TX bytes:3131378 (3.1 MB) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8071 PCI-E Gigabit Ethernet Controller (rev 16)

    Read the article

  • Antenna Aligner part 2: Finding the right direction

    - by Chris George
    Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

    Read the article

  • Cannot Restore GRUB (Ubuntu 11.04 + Win 7)

    - by Benny
    I'm trying to fix GRUB on my PC, but I'm running into serious issues doing so. Any help would be greatly appreciated as I'm completely crippled right now. Here is the sequence of events for this PC: Installed Windows 7 Split full disk into two partitions (one for win7 and one for multimedia) Long time passed Split one of the partitions into two again Installed Ubuntu 11.04 on new partition A little time passed Windows 7 acting up, reinstall Ubuntu GRUB gone Tried restoring GRUB by mounting and grub-install from live USB Tried switching to a live CD instead of USB (thinking it might be the drive) Now I don't see GRUB and I'm getting "input/output" errors An example i/o error: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe86aff6 Device Boot Start End Blocks Id System /dev/sda1 * 1 48727 391393280 7 HPFS/NTFS /dev/sda2 48727 77063 227612647+ 7 HPFS/NTFS /dev/sda3 77063 91202 113566721 5 Extended /dev/sda5 77063 90622 108908544 83 Linux /dev/sda6 90622 91202 4657152 82 Linux swap / Solaris ubuntu@ubuntu:~$ sudo mount /dev/sda5 /mnt ubuntu@ubuntu:~$ sudo grub-install --root-directory=/mnt /dev/sda mkdir: cannot create directory `/mnt/boot': Input/output error ubuntu@ubuntu:~$ cd /mnt ubuntu@ubuntu:/mnt$ ls ls: cannot access etc: Input/output error

    Read the article

  • How to get my laptop to detect SD cards inserted into its built-in card reader?

    - by Candelight
    My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

    Read the article

  • Boot problems w/ External HDD

    - by JeremyT
    I'm having a problem with booting a live image off of a USB Hard Drive. I used Startup Disk Creator to make an Ubuntu 11.10 live image on a partition on my external so that I can use it on various computers. I set it up with ~4GB of persistent data So far I've tried it on two computers. One, a Dell, will boot to my external but it loads the select boot device very slowly. It hangs on a screen with an underscore for up to 5 minutes until it allows me to select which drive I want to boot from. After that, it works great. However, on my primary computer it doesn't work at all. It's an Acer from 2009 and it won't even recognize the drive. I don't see it anywhere in BIOS or the select boot disk list. The light on the external will come on at boot just fine so I know it's powering it at this time. Both computers worked perfectly with my 4GB flash drive that I had partitioned half and half (1st half FAT32 and second Ubuntu 11.10 live)

    Read the article

  • CodePlex Daily Summary for Sunday, October 14, 2012

    CodePlex Daily Summary for Sunday, October 14, 2012Popular ReleasesJsQueryExpression: Initial release: Initial release is aimed to present a public view for community. It is in your own risk to use it in a production environment. Please send feedbacks with your experiences.ZXMAK2: Version 2.6.4.0: - added RZX playback - fix Reset behaviorDroid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)GoogleMap Control: GoogleMap Control 6.1: Some important bug fixes and couple of new features were added. There are no major changes to the sample website. Source code could be downloaded from the Source Code section selecting branch release-6.1. Thus just builds of GoogleMap Control are issued here in this release. Update 14.Oct.2012 - Client side access fixed NuGet Package GoogleMap Control 6.1 NuGet Package FeaturesBounds property to provide ability to create a map by center and bounds as well; Setting in markup <artem:Goog...mojoPortal: 2.3.9.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2393-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...OstrivDB: OstrivDB 0.1: - Storage configuration: objects serialization (Xml, Json), storage file compressing, data block size. - Caching for Select queries. - Indexing. - Batch of queries. - No special query language (LINQ used). - Integrated sorting and paging. - Multithreaded data processing.D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. Updated: I'm added an example for this question. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial ...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...VidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Picturethrill: Version 2.10.7.0: Major FeaturesWindows 8 Support!!! Picturethrill is fully tested on latest Windows 8. Try it now.New AboutPicturethrill Dialog Available from "Advanced" window. Describes Version, Developers and other infoFull Installation Information in Control Panel Picturethrill in ControlPanel has full information, including Version and Size. Minor Bug FixesImproved Logging AppDomain Unhandled Exception Logging Delete WallpaperDownload Folder (Saves Diskspace) Advanced Settings "Close" button bug ...New Projects_p2: Testing rest.A Standard Programmatic Interface for Asynchronous Operations: The project codename "Indigo" is a prototype implementation of the N3327 proposal to JTC1/SC22/WG21AlgoritmTeorija: Some work for KTU.ASP.Net WebAPI Sample: Web API and knockout test drive For full details [url:http://magedfarag.wordpress.com/2012/10/13/asp-net-web-api-knockout-test-drive/]CDMA Messaging: .NET CDMA Messaging LibraryChimera USB: This project integrates flash memory sticksdream drumming: a win8 Metro GameInteractivity Libraries for Windows Store App: System.Windows.Interactivity ? Windows ????????????。 Windows ??????? Trigger ? Behavior ???????。Knapsack: This projects goal is to share different algorithms coded in .NET to solve the KnapSack problem.NOSDC: The Northern Ontario Software Developer Community (NOSDC) brings together software developers from all over Northern Ontario to expand and share our knowledge asumtwonumbers: This is a simple code to sum two numbers by WeamSVConnect: Lightweight and efficient SOAP client library for Java (Android platform) to connect Java with WCF services.TFS 2012 Server/service Setup for Demo: Set up a TFS 2012 Server/Service demo environment in less than 1 minute now! Web API Spatial Formatters: Web API Formatters for providing simple spatial data services that can be easily integrated into a range of mapping toolkits. WillCall: A stab at a schcheduler.yongyou_web_b: Summary

    Read the article

  • Accessing second hard drive

    - by Jonathan
    Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

    Read the article

  • Language Niches and Niche Libraries

    - by Roman A. Taycher
    "Everyone Knows" ... ... that c is widely used for low level programs in large part because operating system/device apis are usually in c. ... that Java is widely used for enterprise applications in large part because of enterprise libraries and ide support. ... that ruby is widely used for webapps thanks in large part because of rails and its library ecosytem But lets go into to details what are the specific niches and subniches. Especially with respect to libraries. Where might you embed lua for application scripting versus python. Where would you use Java vs C#. Which languages do different scientists use? Also which languages have libraries for these subniches? Things like bioperl/scipy/Incanter. Please no flamewars about how nice each language or environment is. This is where they used. Also no complaints about marketing/PHBs. (Manually migrated) I asked this question again after it was closed on stackoverflow.com

    Read the article

  • System in low-graphics mode

    - by Artem Moskalev
    I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

    Read the article

  • Help in decide the partition to install ubuntu

    - by G.Ashwin kumar
    I have a PC running with windows 7 ultimate 64 bit version with 4 gig Ram. I have a 320 gig hard disk , in which I have allocated 120 gig for windows 7, 100 gig for NY files(named ashwin in windows) and rest 80-90 gig partitioned but empty NTFS partition.Now where do I install Ubuntu so that windows and data is safe. I got the option install with windows I selected it , it then shows select drive(SCSI1 (0,0,0) (sda) -320.1 GB ATA WDC WD3200AAJS-6) and allocate driver by dragging the divider below which shows 66.5gb and 59.3 GB respectively. Which one do I go with? I clicked advance partitioning it shows five devices: device , type, m.point ,size.(mb), used(mb)......... /dev/sda1, NTFS, 104 , 35 (windows 7 loader) /dev/sda2, NTFS, 104752, 23604 /dev/sda3, NTFS, 125829, 10161 /dev/sda5, NTFS, 89382, 3221 when I checked size in properties it showed name of drive according to windows, used.Gb, free, total. ashwin, 10.2, 115.7, 125.8 c drive, 23.6, 81.1, 104.8 new volume, 92.6mb, 89.3, 89.4 except mentioned everything in gigabytes.ignore the last dots. I want to install it in new volume or using that space how do I do it? Explain in detail I'm a beginner.

    Read the article

  • Unable to start VMWare Workstation after upgrade to 13.04

    - by pst007x
    After upgrading to 13.04 I am unable to start VMWorkstation. I get the following message: Before you can run VMware, several modules must be compiled and loaded into the running kernel. Kernel Headers 3.8.0-19-generic Kernel headers for version 3.8.0-19-generic were not found. If you have installed them in a non-default path you can specify the path below. Does anyone have any idea what to do next? Ubuntu 13.04 64bit If I direct the path to: /usr/src/linux-headers-3.8.0-19-generic I get the following message: C header files matching your running kernel were not found. Thanks Additional: As suggested I run this in terminal: cd /lib/modules/$(uname -r)/build/include/linux sudo ln -s ../generated/utsrelease.h sudo ln -s ../generated/autoconf.h sudo ln -s ../generated/uapi/linux/version.h However, now I get the following: Before you can run VMware, several modules must be compiled and loaded into the kernel CANCEL / INSTALL I INSTALL, the window closes and nothing happens.... Any ideas? ADDITIONAL: I installed this: sudo apt-get install open-vm-tools open-vm-tools-dev open-vm-dkms open-vm-toolbox open-vm-tools-dev And it all launched... Many thanks for the suggestions and help... This is what I love about Ubuntu... it has a great helpful community... ! Note: Also found this which may help others too: HERE ADDITIONAL ERROR: Could not open /dev/vmmon: Is a directory. Please make sure that the kernel module `vmmon' is loaded. Failed to initialize monitor device. Monitor settings all greyed out RESOLUTION: Re-installation of Nvidia Drivers

    Read the article

  • What is wrong with my game loop/mechanic?

    - by elias94xx
    I'm currently working on a 2d sidescrolling game prototype in HTML5 canvas. My implementations so far include a sprite, vector, loop and ticker class/object. Which can be viewed here: http://elias-schuett.de/apps/_experiments/2d_ssg/js/ So my game essentially works well on todays lowspec PC's and laptops. But it does not on an older win xp machine I own and on my Android 2.3 device. I tend to get ~10 FPS with these devices which results in a too high delta value, which than automaticly gets fixed to 1.0 which results in a slow loop. Now I know for a fact that there is a way to implement a super smooth 60 or 30 FPS loop on both devices. Best example would be: http://playbiolab.com/ I don't need all the chunk and debugging technology impact.js offers. I could even write a super simple game where you just control a damn square and it still wouldn't run on a equally fast 30 or 60 fps. Here is the Loop class/object I'm using. It requires a requestAnimationFrame unify function. Both devices I've tested my game on support requestAnimationFrame, so there is no interval fallback. var Loop = function(callback) { this.fps = null; this.delta = 1; this.lastTime = +new Date; this.callback = callback; this.request = null; }; Loop.prototype.start = function() { var _this = this; this.request = requestAnimationFrame(function(now) { _this.start(); _this.delta = (now - _this.lastTime); _this.fps = 1000/_this.delta; _this.delta = _this.delta / (1000/60) > 2 ? 1 : _this.delta / (1000/60); _this.lastTime = now; _this.callback(); }); }; Loop.prototype.stop = function() { cancelAnimationFrame(this.request); };

    Read the article

  • Priority Manager&ndash;Part 1- Laying out the plan

    - by Patrick Liekhus
    Now that we have shown the EDMX with XPO/XAF and how use SpecFlow and BDD to run EasyTest scripts, let’s put it all together and show the evolution of a project using all the tools combined. I have a simple project that I use to track my priorities throughout the day.  It uses some of Stephen Covey’s principles from The 7 Habits of Highly Effective People.  The idea is to write down all your priorities the night before and rank them.  This way when you get started tomorrow you will have your list of priorities.  Now it’s not that new things won’t appear tomorrow and reprioritize your list, but at least now you can track them.  My idea is to create a project that will allow you manage your list from your desktop, a web browser or your mobile device.  This way your list is never too far away.  I will layout the data model and the additional concepts as time progresses. My goal is to show the power of all of these tools combined and I thought the best way would be to build a project in sequence.  I have had this idea for quite some time so let’s get it completed with the outline below. Here is the outline of the series of post in the near future: Part 2 – Modeling the Business Objects Part 3 – Changing XAF Default Properties Part 4 – Advanced Settings within Liekhus EDMX/XAF Tool Part 5 – Custom Business Rules Part 6 – Unit Testing Our Implementation Part 7 – Behavior Driven Development (BDD) and SpecFlow Tests Part 8 – Using the Windows Application Part 9 – Using the Web Application Part 10 – Exposing OData from our Project Part 11 – Consuming OData with Excel PowerPivot Part 12 – Consuming OData with iOS Part 13 – Consuming OData with Android Part 14 – What’s Next I hope this helps outline what to expect.  I anticipate that I will have additional topics mixed in there but I plan on getting this outline completed within the next several weeks.  Thanks

    Read the article

  • Resize a pendrive Linux?

    - by user11239
    I'm running Ubuntu from USB media, which has a drive capacity of 250 GB, all existing as one FAT32 partition. However, when I created the bootable Ubuntu drive, only 4.79 GB were allocated for usage. Rather than put files directly into the /cdrom where the drive is mounted, I want to expand what is listed here in aufs to be at least 200 GB. I'm hopeful that I can do this live. Output of df : Filesystem 1K-blocks Used Available Use% Mounted on aufs 4051904 4050108 0 100% / none 1542852 284 1542568 1% /dev /dev/sdb1 244076800 4901648 239175152 3% /cdrom /dev/loop0 688000 688000 0 100% /rofs none 1547840 1496 1546344 1% /dev/shm tmpfs 1547840 4828 1543012 1% /tmp none 1547840 80 1547760 1% /var/run none 1547840 0 1547840 0% /var/lock none 1547840 0 1547840 0% /lib/init/rw Output of fdisk -l : Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00083fe4 Device Boot Start End Blocks Id System /dev/sdb1 * 1 30401 244196001 c W95 FAT32 (LBA) So basically what I want to do is get /dev/sdb1 to be entirely, or almost entirely read as aufs. I'm confused over how to do this, as the file systems are all part of /dev/sdb1 on one big partition, rather than separate partitions for separate file systems.

    Read the article

  • Ubuntu 12.04 64 bit "unable to find medium with live filesystem" AFTER normal install

    - by user88710
    So, I got a new computer (64 bit quad core yada yada). pulled my Ubuntu SSD drive from old machine, installed it into new machine. (my intention here is to have Ubuntu installed on the 120G SSD, Win7 on the main drive) downloaded 64 bit Ubuntu, burned it to a disk. rebooted with Live CD, installed Ubuntu to the SSD drive, had no problems rebooted again, got the grub menu, selected Ubuntu after a minute i got this - "unable to find medium with live filesystem" booting into windows, explorer doesnt even see the SSD. Device manager sees it though. I assume this is because its formatted with ext4. so, The liveCD saw the SSD just fine, installed fine, but when i try to boot ubuntu, i get the error above, heeellllpppp! UPDATE: small update. Windows did a software update that apparently wiped out my grub, so I guess grub was installed on the main drive. I reinstalled Ubuntu (again) on the SSD drive but, still no joy with booting from it. same error message as above.

    Read the article

  • hdmi audio works only with aplay -D alsa test wavs; open source radeon drivers; kernel 3.5 vgaswitcheroo

    - by user108754
    I've trolled the internets to make hdmi work on my system Ubuntu 12.04 software center kernel 3.5 uname: Linux ubuntu 3.5.0-18-generic #29~precise1-Ubuntu SMP...x86_64 x86_64 x86_64 GNU/Linux open source radeon drivers vgaswitcheroo (hybrid intel/radeon gpu): I boot with intel, not radeon, running. (and recall that with kernel 3.5, vgaswitcheroo now gives info on a third item, "DIS-Audio"; it indicates pwr on my system) ( /etc/rc.local: chown user:user /sys/kernel/debug/ # change "username" with your user name echo OFF /sys/kernel/debug/vgaswitcheroo/switch ) grub indeed now has "radeon.audio=1" for testing audio, I did aplay -l which gave me the card and device, which made me try aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav and lo! I get crystal clear sound on my hdtv. If I play an mp3 file as the argument to that command, I get noise as, I guess, aplay interprets the mp3 code as a wav. If I play a .wav that is not in the /usr/share/sounds/alsa/ directory, I get nothing. Internet flash video in browser plays no sound over hdmi. Both system sounds control and pavucontrol have hdmi cedar selected. Alas, I can not get sound for any gui test (left, right). Why would only aplay, and only when directed with "-D plughw", yield sound over hdmi? I've also tried only using one sound program at a time, if it was a limitation of alsa, so I tried aplay with web browser and even the sound control gui closed. I tried each of the last two, running alone. No improvement. alsamixer only shows hda intel and I think it's only the intel audio, not the hdmi.

    Read the article

  • Touchpad right click doesn't work on HP Envy 14 beats

    - by jdrageme01
    I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

    Read the article

  • How is the Ubuntu installation supposed to work?

    - by Bob D
    I have given up on installing Ubuntu 12.04.01 for the sixth time. I finally got Windows XP to work again. So I blitzted the Ubuntu partition and the swap partition and was about to install the sixth try when it occurred to me that ought to ask how is is "supposed" to go. My installer will install Ubuntu on the Linus ext4 partition I created by hand in Windows on my C drive. But the installer keeps insisting on installing the OS on my D drive unless I intervene. So if I choose "do something else" it will accept installing Ubuntu on the C drive in the partition I previously created, but it insists on putting the "Device for boot loader installation" on the D drive. I can select a different drive at this point (where I could not with the "along side windows choice) but what drive to I choose??? It lists sda, sda1, sda5, sdb and sdb1. The five times before this all ended in disaster letting the installer choose. So I need human intervention. Where is the safe place to do this. The results from the previous attempts left me with only the Ubuntu that would boot, the boot to windows from the grub menu failed every time. Is there a better version of Ubuntu I can use? Is V12.04.01 messed up? My goal is still to use Wine on it to run PC programs. I would like to find a shell or skin or something that makes it seem like windows but have the security and power of Linux under the good. I have seen this type of system and it worked very well. I know I am getting long winded but I have been though at least four of the seven rings of hell already, so I want this install to be the last.

    Read the article

  • Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

    - by Tim
    Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

    Read the article

  • Simple NAS setup for Ubuntu

    - by Sean Houlihane
    So, I want to connect my shiny new NAS (QNAP TS-210p II) to my Ubuntu 11.10 box. I have a 2nd Ubuntu machine, but I don't use that enough to be too worried about it. Use is ideally to offload all storage except for system (which can then run off a 30GB flash drive). The main machine also runs Myth front/backends. Both are on a wired network currently. I have got a basic setup working, mounted over NFS, but have some issues, and whenever I look for answers, I seem to get unto the UbuntuServer domain, with what seems like more detail than I want in an answer. Questions I have identified so far: 1) Sharing UIDs to get file permissions correct. LDAP or something else? What is necessary to make this work? 2) Mounting an NFS device reliably. Do I just add it in fstab or is some sort of auto-mount advisable? Its a wired network, but I shouldn't need to worry about reboot after power-outages and sequencing...

    Read the article

  • How Google Web Starter Kit serves adaptive image for mobile?

    - by 5argon
    My website weirdly (in a good way) serves smaller images when viewed on mobile. I wanted to know what cause this? As far as I know this is not the default behaviour, so I think it must be Google Web Starter Kit's doing.Here is the debug information when debugging on device. All images became 231 B size no matter how large it actually is. (On desktop debugging the size varies.) I tried using Google Web Starter Kit (https://github.com/google/web-starter-kit) recently. The tools in it are made of Ruby, Node.js, SASS and Gulp to help you 'build' website. Pre-build you can enjoy automatic reload because the Gulp script will watch all files for you. When build it will run various tools to minify HTML,CSS and compress images. According to this page https://developers.google.com/web/fundamentals/tools/build/build_site the gulp-imagemin was used. So I guess the imagemin is doing the mobile optimization for me? What kind of compression can serve automatically resized image on mobile? And why is the size 231 B? Is this related to my screen size?

    Read the article

  • How to retain secondary hard drive mounts at reboot and keep shares?

    - by Tom
    I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

    Read the article

  • OpenGL ES 2 on Android: native window

    - by ThreaderSlash
    According to OGLES specification, we have the following definition: EGLSurface eglCreateWindowSurface(EGLDisplay display, EGLConfig config, NativeWindowType native_window, EGLint const * attrib_list) More details, here: http://www.khronos.org/opengles/documentation/opengles1_0/html/eglCreateWindowSurface.html And also by definition: int32_t ANativeWindow_setBuffersGeometry(ANativeWindow* window, int32_t width, int32_t height, int32_t format); More details, here: http://mobilepearls.com/labs/native-android-api I am running Android Native App on OGLES 2 and debugging it in a Samsung Nexus device. For setting up the 3D scene graph environment, the following variables are defined: struct android_app { ... ANativeWindow* window; }; android_app* mApplication; ... mApplication=&pApplication; And to initialize the App, we run the commands in the code: ANativeWindow_setBuffersGeometry(mApplication->window, 0, 0, lFormat); mSurface = eglCreateWindowSurface(mDisplay, lConfig, mApplication->window, NULL); Funny to say is that, the command ANativeWindow_setBuffersGeometry behaves as expected and works fine according to its definition, accepting all the parameters sent to it. But the eglCreateWindowSurface does no accept the parameter mApplication-window, as it should accept according to its definition. Instead, it looks for the following input: EGLNativeWindowType hWnd; mSurface = eglCreateWindowSurface(mDisplay,lConfig,hWnd,NULL); As an alternative, I considered to use instead: NativeWindowType hWnd=android_createDisplaySurface(); But debugger says: Function 'android_createDisplaySurface' could not be resolved Is 'android_createDisplaySurface' compatible only for OGLES 1 and not for OGLES 2? Can someone tell if there is a way to convert mApplication-window? In a way that the data from the android_app get accepted to the window surface?

    Read the article

  • OpenGL sprites and point size limitation

    - by Srdan
    I'm developing a simple particle system that should be able to perform on mobile devices (iOS, Andorid). My plan was to use GL_POINT_SPRITE/GL_PROGRAM_POINT_SIZE method because of it's efficiency (GL_POINTS are enough), but after some experimenting, I found myself in a trouble. Sprite size is limited (to usually 64 pixels). I'm calculating size using this formula gl_PointSize = in_point_size * some_factor / distance_to_camera to make particle sizes proportional to distance to camera. But at some point, when camera is close enough, problem with size limitation emerges and whole system starts looking unrealistic. Is there a way to avoid this problem? If no, what's alternative? I was thinking of manually generating billboard quad for each particle. Now, I have some questions about that approach. I guess minimum geometry data would be four vertices per particle and index array to make quads from these vertices (with GL_TRIANGLE_STRIP). Additionally, for each vertex I need a color and texture coordinate. I would put all that in an interleaved vertex array. But as you can see, there is much redundancy. All vertices of same particle share same color value, and four texture coordinates are same for all particles. Because of how glDrawArrays/Elements works, I see no way to optimise this. Do you know of a better approach on how to organise per-particle data? Should I use buffers or vertex arrays, or there is no difference because each time I have to update all particles' data. About particles simulation... Where to do it? On CPU or on a vertex processors? Something tells me that mobile's CPU would do it faster than it's vertex unit (at least today in 2012 :). So, any advice on how to make a simple and efficient particle system without particle size limitation, for mobile device, would be appreciated. (animation of camera passing through particles should be realistic)

    Read the article

< Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >