Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 401/534 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

  • Frequent disconnects using wlan AR9285

    - by John Neil
    I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

    Read the article

  • Can't mount USB devices, shut down etc. as a user

    - by Alok
    I tried gnome3 and gnome3-staging ppas to test running Gnome 3.8. After a while I decided that Gnome 3.8 wasn't for me, so I did a ppa-purge of both the ppas. As described in gnome3-staging ppa page, I also did: $ sudo apt-get purge libpam-systemd $ sudo apt-get install libpam-xdg-support The trouble is, I can't mount my external USB device anymore. When I try to mount it as a user, it fails: $ udisks --mount /dev/sdc1 Mount failed: Not Authorized I am logged in an XFCE session, but the same thing happens in a fallback Gnome session, or from a Unity session. Also, in XFCE, "suspend" and "shut down" menus are grayed out. I can't also open synaptic package manager from XFCE menus (sudo synaptic works). After a lot of searching, it seems like it is a policykit issue. I see the following in my ~/.xsession-errors: (polkit-gnome-authentication-agent-1:5805): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 5805 PID 5805 doesn't exist. If I try to start polkit-dnome-authentication-agent-1 from an xterm, I get the same error (different PID): $ /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 ... (polkit-gnome-authentication-agent-1:15971): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 15971 (the ... lines are warnings from GTK about missing css files etc.). polkitd is running: $ pidof polkitd 1495 Is there something I am missing?

    Read the article

  • Design pattern for an automated mechanical test bench

    - by JJS
    Background I have a test fixture with a number of communication/data acquisition devices on it that is used as an end of line test for a product. Because of all the various sensors used in the bench and the need to run the test procedure in near real-time, I'm having a hard time structuring the program to be more friendly to modify later on. For example, a National Instruments USB data acquisition device is used to control an analog output (load) and monitor an analog input (current), a digital scale with a serial data interface measures position, an air pressure gauge with a different serial data interface, and the product is interfaced through a proprietary DLL that handles its own serial communication. The hard part The "real-time" aspect of the program is my biggest tripping point. For example, I need to time how long the product needs to go from position 0 to position 10,000 to the tenth of a second. While it's traveling, I need to ramp up an output of the NI DAQ when it reaches position 6,000 and ramp it down when it reaches position 8,000. This sort of control looks easy from browsing NI's LabVIEW docs but I'm stuck with C# for now. All external communication is done by polling which makes for lots of annoying loops. I've slapped together a loose Producer Consumer model where the Producer thread loops through reading the sensors and sets the outputs. The Consumer thread executes functions containing timed loops that poll the Producer for current data and execute movement commands as required. The UI thread polls both threads for updating some gauges indicating current test progress. Unsure where to start Is there a more appropriate pattern for this type of application? Are there any good resources for writing control loops in software (non-LabVIEW) that interface with external sensors and whatnot?

    Read the article

  • Grub does not show a Windows 8 option after dual boot

    - by skytreader
    So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

    Read the article

  • Get Our New Book: The How-To Geek Guide to Windows 8

    - by The Geek
    Lets face it, Windows 8 is a major change to Windows, and for many, quite confusing. Today we’re releasing our very very first book: The How-To Geek Guide to Windows 8, which is written to be easy enough for anybody to understand, but comprehensive enough for experts to enjoy. There’s over a thousand screenshots and pictures in the book to help you get the hang of navigating around Windows 8, and nearly a thousand pages of content so there’s nothing you won’t understand. Everything is covered in traditional How-To Geek style, with step-by-step instructions complete with pictures, more pictures, and even more pictures. There’s over a thousand pictures in this book! This book is priced very reasonably for a nearly thousand-page computer book, at only $9.99 on the Amazon Kindle store. We don’t use DRM, and you can use it on any device that supports Kindle—including reading it directly in your web browser. If you like How-To Geek, you’ll like this book. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

    Read the article

  • Windows Phone 7 : Dragging and flicking UI controls

    - by TechTwaddle
    Who would want to flick and drag UI controls!? There might not be many use cases but I think some concepts here are worthy of a post. So we will create a simple silverlight application for windows phone 7, containing a canvas element on which we’ll place a button control and an image and then, as the title says, drag and flick the controls. Here’s Mainpage.xaml, <Grid x:Name="LayoutRoot" Background="Transparent">   <Grid.RowDefinitions>     <RowDefinition Height="Auto"/>     <RowDefinition Height="*"/>   </Grid.RowDefinitions>     <!--TitlePanel contains the name of the application and page title-->   <StackPanel x:Name="TitlePanel" Grid.Row="0" Margin="12,17,0,28">     <TextBlock x:Name="ApplicationTitle" Text="KINETICS" Style="{StaticResource PhoneTextNormalStyle}"/>     <TextBlock x:Name="PageTitle" Text="drag and flick" Margin="9,-7,0,0" Style="{StaticResource PhoneTextTitle1Style}"/>   </StackPanel>     <!--ContentPanel - place additional content here-->   <Grid x:Name="ContentPanel" Grid.Row="1" >     <Canvas x:Name="MainCanvas" HorizontalAlignment="Stretch" VerticalAlignment="Stretch">       <Canvas.Background>         <LinearGradientBrush StartPoint="0 0" EndPoint="0 1">           <GradientStop Offset="0" Color="Black"/>           <GradientStop Offset="1.5" Color="BlanchedAlmond"/>         </LinearGradientBrush>       </Canvas.Background>     </Canvas>   </Grid> </Grid> the second row in the main grid contains a canvas element, MainCanvas, with its horizontal and vertical alignment set to stretch so that it occupies the entire grid. The canvas background is a linear gradient brush starting with Black and ending with BlanchedAlmond. We’ll add the button and image control to this canvas at run time. Moving to Mainpage.xaml.cs the Mainpage class contains the following members, public partial class MainPage : PhoneApplicationPage {     Button FlickButton;     Image FlickImage;       FrameworkElement ElemToMove = null;     double ElemVelX, ElemVelY;       const double SPEED_FACTOR = 60;       DispatcherTimer timer; FlickButton and FlickImage are the controls that we’ll add to the canvas. ElemToMove, ElemVelX and ElemVelY will be used by the timer callback to move the ui control. SPEED_FACTOR is used to scale the velocities of ui controls. Here’s the Mainpage constructor, // Constructor public MainPage() {     InitializeComponent();       AddButtonToCanvas();       AddImageToCanvas();       timer = new DispatcherTimer();     timer.Interval = TimeSpan.FromMilliseconds(35);     timer.Tick += new EventHandler(OnTimerTick); } We’ll look at those AddButton and AddImage functions in a moment. The constructor initializes a timer which fires every 35 milliseconds, this timer will be started after the flick gesture completes with some inertia. Back to AddButton and AddImage functions, void AddButtonToCanvas() {     LinearGradientBrush brush;     GradientStop stop1, stop2;       Random rand = new Random(DateTime.Now.Millisecond);       FlickButton = new Button();     FlickButton.Content = "";     FlickButton.Width = 100;     FlickButton.Height = 100;       brush = new LinearGradientBrush();     brush.StartPoint = new Point(0, 0);     brush.EndPoint = new Point(0, 1);       stop1 = new GradientStop();     stop1.Offset = 0;     stop1.Color = Colors.White;       stop2 = new GradientStop();     stop2.Offset = 1;     stop2.Color = (Application.Current.Resources["PhoneAccentBrush"] as SolidColorBrush).Color;       brush.GradientStops.Add(stop1);     brush.GradientStops.Add(stop2);       FlickButton.Background = brush;       Canvas.SetTop(FlickButton, rand.Next(0, 400));     Canvas.SetLeft(FlickButton, rand.Next(0, 200));       MainCanvas.Children.Add(FlickButton);       //subscribe to events     FlickButton.ManipulationDelta += new EventHandler<ManipulationDeltaEventArgs>(OnManipulationDelta);     FlickButton.ManipulationCompleted += new EventHandler<ManipulationCompletedEventArgs>(OnManipulationCompleted); } this function is basically glorifying a simple task. After creating the button and setting its height and width, its background is set to a linear gradient brush. The direction of the gradient is from top towards bottom and notice that the second stop color is the PhoneAccentColor, which changes along with the theme of the device. The line,     stop2.Color = (Application.Current.Resources["PhoneAccentBrush"] as SolidColorBrush).Color; does the magic of extracting the PhoneAccentBrush from application’s resources, getting its color and assigning it to the gradient stop. AddImage function is straight forward in comparison, void AddImageToCanvas() {     Random rand = new Random(DateTime.Now.Millisecond);       FlickImage = new Image();     FlickImage.Source = new BitmapImage(new Uri("/images/Marble.png", UriKind.Relative));       Canvas.SetTop(FlickImage, rand.Next(0, 400));     Canvas.SetLeft(FlickImage, rand.Next(0, 200));       MainCanvas.Children.Add(FlickImage);       //subscribe to events     FlickImage.ManipulationDelta += new EventHandler<ManipulationDeltaEventArgs>(OnManipulationDelta);     FlickImage.ManipulationCompleted += new EventHandler<ManipulationCompletedEventArgs>(OnManipulationCompleted); } The ManipulationDelta and ManipulationCompleted handlers are same for both the button and the image. OnManipulationDelta() should look familiar, a similar implementation was used in the previous post, void OnManipulationDelta(object sender, ManipulationDeltaEventArgs args) {     FrameworkElement Elem = sender as FrameworkElement;       double Left = Canvas.GetLeft(Elem);     double Top = Canvas.GetTop(Elem);       Left += args.DeltaManipulation.Translation.X;     Top += args.DeltaManipulation.Translation.Y;       //check for bounds     if (Left < 0)     {         Left = 0;     }     else if (Left > (MainCanvas.ActualWidth - Elem.ActualWidth))     {         Left = MainCanvas.ActualWidth - Elem.ActualWidth;     }       if (Top < 0)     {         Top = 0;     }     else if (Top > (MainCanvas.ActualHeight - Elem.ActualHeight))     {         Top = MainCanvas.ActualHeight - Elem.ActualHeight;     }       Canvas.SetLeft(Elem, Left);     Canvas.SetTop(Elem, Top); } all it does is calculate the control’s position, check for bounds and then set the top and left of the control. OnManipulationCompleted() is more interesting because here we need to check if the gesture completed with any inertia and if it did, start the timer and continue to move the ui control until it comes to a halt slowly, void OnManipulationCompleted(object sender, ManipulationCompletedEventArgs args) {     FrameworkElement Elem = sender as FrameworkElement;       if (args.IsInertial)     {         ElemToMove = Elem;           Debug.WriteLine("Linear VelX:{0:0.00}  VelY:{1:0.00}", args.FinalVelocities.LinearVelocity.X,             args.FinalVelocities.LinearVelocity.Y);           ElemVelX = args.FinalVelocities.LinearVelocity.X / SPEED_FACTOR;         ElemVelY = args.FinalVelocities.LinearVelocity.Y / SPEED_FACTOR;           timer.Start();     } } ManipulationCompletedEventArgs contains a member, IsInertial, which is set to true if the manipulation was completed with some inertia. args.FinalVelocities.LinearVelocity.X and .Y will contain the velocities along the X and Y axis. We need to scale down these values so they can be used to increment the ui control’s position sensibly. A reference to the ui control is stored in ElemToMove and the velocities are stored as well, these will be used in the timer callback to access the ui control. And finally, we start the timer. The timer callback function is as follows, void OnTimerTick(object sender, EventArgs e) {     if (null != ElemToMove)     {         double Left, Top;         Left = Canvas.GetLeft(ElemToMove);         Top = Canvas.GetTop(ElemToMove);           Left += ElemVelX;         Top += ElemVelY;           //check for bounds         if (Left < 0)         {             Left = 0;             ElemVelX *= -1;         }         else if (Left > (MainCanvas.ActualWidth - ElemToMove.ActualWidth))         {             Left = MainCanvas.ActualWidth - ElemToMove.ActualWidth;             ElemVelX *= -1;         }           if (Top < 0)         {             Top = 0;             ElemVelY *= -1;         }         else if (Top > (MainCanvas.ActualHeight - ElemToMove.ActualHeight))         {             Top = MainCanvas.ActualHeight - ElemToMove.ActualHeight;             ElemVelY *= -1;         }           Canvas.SetLeft(ElemToMove, Left);         Canvas.SetTop(ElemToMove, Top);           //reduce x,y velocities gradually         ElemVelX *= 0.9;         ElemVelY *= 0.9;           //when velocities become too low, break         if (Math.Abs(ElemVelX) < 1.0 && Math.Abs(ElemVelY) < 1.0)         {             timer.Stop();             ElemToMove = null;         }     } } if ElemToMove is not null, we get the top and left values of the control and increment the values with their X and Y velocities. Check for bounds, and if the control goes out of bounds we reverse its velocity. Towards the end, the velocities are reduced by 10% every time the timer callback is called, and if the velocities reach too low values the timer is stopped and ElemToMove is made null. Here’s a short video of the program, the video is a little dodgy because my display driver refuses to run the animations smoothly. The flicks aren’t always recognised but the program should run well on an actual device (or a pc with better configuration), You can download the source code from here: ButtonDragAndFlick.zip

    Read the article

  • How do I disable touchpad tap to click?

    - by AWE
    You've heard this a million times but the "tap to click" is a pain in the behind and I want to disable it. There is no touchpad in gpointing-device-settings and neither in mouse and touchpad in system settings. I've tried some commands in terminal but it's all crap. Dconf-editor doesn't react. How about solving this once and for all? xinput list: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys id=14 [slave keyboard (3)]

    Read the article

  • UDF Partition reported full when it is not

    - by Capt.Nemo
    I was using these instructions to setup an external hard disk with udf. I have been able to setup a multi-partition system using those instructions, but I seem to have hit a wall, where the partition is reported as full while writing to the disk. Every other tool available to me reports it as free. Relevant lshw output Here's a screenshot showing the disk: Both the output of df and the file manager (caja) report the disk as free. Filesystem Size Used Avail Use% Mounted on /dev/sda9 9.0G 7.6G 910M 90% / udev 974M 12K 974M 1% /dev /dev/sda1 50G 47G 295M 100% /media/Data /dev/sda6 49G 41G 5.9G 88% /home /dev/sda2 155G 127G 29G 82% /media/Entertainment /dev/sda8 14G 13G 516M 96% /media/Stuff /dev/sdb2 120G 1.9G 112G 2% /media/3c887659-5676-4946-875b-b797be508ce7 /dev/sdb3 11G 2.6G 7.7G 25% /media/108b0a1d-fd1a-4f38-b1c6-4ad1a20e34a3 /dev/sdb1 802G 34G 768G 5% /media/disk I seem to have hit a wall near the 35GB mark. Despite being shown as 35gb/860gb used everywhere, the following happens on a write attempt: [2017][/media/Dory]$ echo D>>echo bash: echo: write error: No space left on device Writing byte by byte, the maximum I can take it to is 34719248K. The most weird part is that on mounting it Windows, Windows can write to the disk easily, and the writes are being read fine back in Ubuntu. However, the used-bytes remains at 34719248K in Ubuntu (It goes higher on Windows, however).

    Read the article

  • AndEngine Box2d game

    - by OneMoreVladimir
    I'm developing a 2d survival shooter using Box2d extension and I've got some questions: I have two AnalogOnScreenControls. Their listeners modify both sprites and bodies. I receive TouchEventPool was exhausted and as their number grows the game crashes accidently. I've tried to put the modification of the bodies and sprites on the UpdateThread but that does not solve the problem. What could be the cause? I have a class that at the beginnig of the game loads all the textures. After I relaunch the game activity several times I receive Unable to find Phys Addr for and "green color" interface. But that doesn't happen if I clear the memory manually through the Task Manager before relaunch What could be the cause? I unload my atlas at the end of the game. The game sometimes crashes at start with NullPointerException in onResumeGame. The solution suggested is to set android:configChanges="orientation|screenSize" but my device is API 10 so it doesn't have screenSize property and orientation only does not seem to help, because the game starts in portrait mode at times (though landscape is set in the code)

    Read the article

  • OpenWorld 2011 Video Index

    - by Chris Kawalek
    We did quite a few virtualization videos this year at Oracle OpenWorld 2011. You can find all these and more on our YouTube channel. Virtualization Wrapup Adam Hawley discusses the Oracle virtualization presence at Oracle OpenWorld 2011. http://www.youtube.com/oraclevirtualization#p/f/2/53_SQYljqN4 Oracle Applications on iPad Brad Lackey shows how you can access Oracle Applications on iPad. http://www.youtube.com/oraclevirtualization#p/f/9/3Ug5km3uxEQ Thinkquest.org and Oracle VM Dan Herrup describes how Thinkquest.org is using Oracle VM to help kids learn how to solve real world problems with computer technology. http://www.youtube.com/oraclevirtualization#p/f/6/Bw-km5kqzEo Avaya and Oracle Virtualization See Oracle desktop virtualization in action at Avaya's booth. http://www.youtube.com/oraclevirtualization#p/f/4/xIHRIijEPkM Eco-Features of Sun Ray Clients Michael Dann shows off the Sun Ray 3 Plus and talks about the eco benefits of Oracle's extremely low power consumption client device for desktop virtualization. http://www.youtube.com/oraclevirtualization#p/f/3/ulArHGe1OmM Application and Desktop Access with Oracle Secure Global Desktop Watch Jeff Harvey do a quick demo of Oracle Secure Global Desktop accessing Oracle Applications. http://www.youtube.com/oraclevirtualization#p/f/5/g_ikA7dwh0g Oracle VM VirtualBox for VDI Andy Hall describes how enterprises leverage Oracle VM VirtualBox as part of their VDI deployments. http://www.youtube.com/oraclevirtualization#p/f/8/WmkeYlzgnZ8 TechCast Live: The Coolest Virtualization Products Interview with Andy Hall about the desktop virtualization portfolio. http://www.youtube.com/oraclevirtualization#p/f/7/VMkrAhZ83AA

    Read the article

  • Cannot enable Additional drivers for Broadcom in 12.10

    - by Compt
    tl;dr version: Additional Drivers does not work for enabling a driver in Ubuntu 12.10, however it worked in 12.04. I upgraded to Ubuntu 12.10 from 12.04 via a live USB. I did a fresh install to avoid any conflicts. From 12.04 I know that my wireless card has proprietary drivers that could be installed via Additional Drivers. I did eventually find additional drivers in the software sources menu, however when I attempt to switch to Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source, it not only does not work, it in fact disables my wireless completely. The only way to revert this is to restart, and revert back to "do not use the device". Then upon another restart, my wireless will function once again. I was curious if anyone else had this issue, and if there was a fix for it as of yet. I looked on launchpad and it may be a potential bug, but I am unsure. Any help would be greatly appreciated (and sorry for that wall of text). Until then, I'll continue to use my wireless as it is (or revert to 12.04), but I do notice a slower connection without it enabled.

    Read the article

  • Deleting Unused Swaps Partions

    - by Nikita Kononov
    Good evening everyone , I got a little issue with Swap Partitions. Due to some issues after installing Ubuntu first time, I reinstalled it and now I have 3 Swaps. Here is sudo fdisk -l result Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xaa9693fe Device Boot Start End Blocks Id System /dev/sda1 2048 52430847 26214400 1c Hidden W95 FAT32 (LBA) /dev/sda2 * 52430848 540677076 244123114+ 7 HPFS/NTFS/exFAT /dev/sda3 540678142 1465147391 462234625 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 1452750848 1465147391 6198272 82 Linux swap / Solaris /dev/sda6 1440352256 1452742655 6195200 82 Linux swap / Solaris /dev/sda7 540678144 1427951615 443636736 83 Linux /dev/sda8 1427953664 1440339967 6193152 82 Linux swap / Solaris So Swaps in /dev/sda5 and /dev/sda6 are no longer in use as far as I understand and thus I was planning to delete them, however faced a problem. What I did is download and burn Gparted Live CD and boot it up, tried to delete those partitions but I have no idea how to add 12GB unallocated memory to the existing OS partition in this case to /dev/sda7 Is there anyway I can delete 2 swaps and extend unallocated memory to /dev/sda7 partion? Thank you in advance!

    Read the article

  • Antenna Aligner part 2: Finding the right direction

    - by Chris George
    Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

    Read the article

  • SEO - different data with same title and keywords

    - by Junaid Saeed
    here is my scenario i have a website where i redirect my users basing upon the device they were using, lets say a user is visiting from an iPad, i take him directly to the page of iPad wallpapers, the user selects iPad version & i take the user to the gallery of wallpapers where the user can select & download any wallpaper. Every wallpaper is the required resolution, i have my reasons for doing this, now the thing is there are diff. resolution. versions of an image appearing one 5 diff. sections of my website, each having their own view page Now there is only one record in db.table for the image, and basing on the my consistent naming convention of the images, i pick the required image. this means when 5 different pages are generated in 5 categorized sections of the website, due to a shared DB record, the keywords, the titles and every single detail of the 5 pages is same besides the resolution of the image, and the section specific details that the page has and yeah the pages also have different paths like wallpapers.com\ipad-1\cars\Ferrari-dino.html wallpapers.com\ipad-2\cars\Ferrari-dino.html wallpapers.com\ipad-3\cars\Ferrari-dino.html wallpapers.com\ipad-4\cars\Ferrari-dino.html wallpapers.com\ipad-5\cars\Ferrari-dino.html now this is my scenario, How do Search Engines see it and how do they rank it? Is it a Good or Normal or Bad SEO practice? If bad how dangerous it is for my sites SEO? i need your comments on my scenario.

    Read the article

  • Navigation in Win8 Metro Style applications

    - by Dennis Vroegop
    In Windows 8, Touch is, as they say, a first class citizen. Now, to be honest: they also said that in Windows 7. However in Win8 this is actually true. Applications are meant to be used by touch. Yes, you can still use mouse, keyboard and pen and your apps should take that into account but touch is where you should focus on initially. Will all users have touch enabled devices? No, not in the first place. I don’t think touchscreens will be on every device sold next year. But in 5 years? Who knows? Don’t forget: if your app is successful it will be around for a long time and by that time touchscreens will be everywhere. Another reason to embrace touch is that it’s easier to develop a touch-oriented app and then to make sure that keyboard, nouse and pen work as doing it the other way around. Porting a mouse-based application to a touch based application almost never works. The reverse gives you much more chances for success. That being said, there are some things that you need to think about. Most people have more than one finger, while most users only use one mouse at the time. Still, most touch-developers translate their mouse-knowledge to the touch and think they did a good job. Martin Tirion from Microsoft said that since Touch is a new language people face the same challenges they do when learning a new real spoken language. The first thing people try when learning a new language is simply replace the words in their native language to the newly learned words. At first they don’t care about grammar. To a native speaker of that other language this sounds all wrong but they still will be able to understand what the intention was. If you don’t believe me: try Google translate to translate something for you from your language to another and then back and see what happens. The same thing happens with Touch. Most developers translate a mouse-click into a tap-event and think they’re done. Well matey, you’re not done. Not by far. There are things you can do with a mouse that you cannot do with touch. Think hover. A mouse has the ability to ‘slide’ over UI elements. Touch doesn’t (I know: with Pen you can do this but I’m talking about actual fingers here). A touch is either there or it isn’t. And right-click? Forget about it. A click is a click.  Yes, you have more than one finger but the machine doesn’t know which finger you use… The other way around is also true. Like I said: most users only have one mouse but they are likely to have more than one finger. So how do we take that into account? Thinking about this is really worth the time: you might come up with some surprisingly good ideas! Still: don’t forget that not every user has touch-enabled hardware so make sure your app is useable for both groups. Keep this in mind: we’re going to need it later on! Now. Apps should be easy to use. You don’t want your user to read through pages and pages of documentation before they can use the app. Imagine that spotter next to an airfield suddenly seeing a prototype of a Concorde 2 landing on the nearby runway. He probably wants to enter that information in our app NOW and not after he’s taken a 3 day course. Even if he still has to download the app, install it for the first time and then run it he should be on his way immediately. At least, fast enough to note down the details of that unique, rare and possibly exciting sighting he just did. So.. How do we do this? Well, I am not talking about games here. Games are in a league of their own. They fall outside the scope of the apps I am describing. But all the others can roughly be characterized as being one of two flavors: the navigation is either flat or hierarchical. That’s it. And if it’s hierarchical it’s no more than three levels deep. Not more. Your users will get lost otherwise and we don’t want that. Flat is simple. Just imagine we have one screen that is as high as our physical screen is and as wide as you need it to be. Don’t worry if it doesn’t fit on the screen: people can scroll to the right and left. Don’t combine up/down and left/right scrolling: it’s confusing. Next to that, since most users will hold their device in landscape mode it’s very natural to scroll horizontal. So let’s use that when we have a flat model. The same applies to the hierarchical model. Try to have at most three levels. If you need more space, find a way to group the items in such a way that you can fit it in three, very wide lanes. At the highest level we have the so called hub level. This is the entry point of the app and as such it should give the user an immediate feeling of what the app is all about. If your app has categories if items then you might show these categories here. And while you’re at it: also show 2 or 3 of the items itself here to give the user a taste of what lies beneath. If the user selects a category you go to the section part. Here you show several sections (again, go as wide as you need) with again some detail examples. After that: the details layer shows each item. By giving some samples of the underlaying layer you achieve several things: you make the layer attractive by showing several different things, you show some highlights so the user sees actual content and you provide a shortcut to the layers underneath. The image below is borrowed from the http://design.windows.com website which has tons and tons of examples: For our app we’ll use this layout. So what will we show? Well, let’s see what sorts of features our app has to offer. I’ll repeat them here: Note planes Add pictures of that plane Notify friends of new spots Share new spots on social media Write down arrival times Write down departure times Write down the runway they take I am sure you can think of some more items but for now we'll use these. In the hub we’ll show something that represents “Spots”, “Friends”, “Social”. Apparently we have an inner list of spotter-friends that are in the app, while we also have to whole world in social. In the layer below we show something else, depending on what the user choose. When they choose “Spots” we’ll display the last spots, last spots by our friends (so we can actually jump from this category to the one next to it) and so on. When they choose a “spot” (or press the + icon in the App bar, which I’ll talk about next time) they go to the lowest and final level that shows details about that spot, including a picture, date and time and the notes belonging to that entry. You’d be amazed at how easy it is to organize your app this way. If you don’t have enough room in these three layers you probably could easily get away with grouping items. Take a look at our hub: we have three completely different things in one place. If you still can’t fit it all in in a logical and consistent way, chances are you are trying to do too much in this app. Go back to your mission statement, determine if it is specific enough and if your feature list helps that statement or makes it unclear. Go ahead. Give it a go! Next time we’ll talk about the look and feel, the charms and the app-bar….

    Read the article

  • 12.04 disabling wireless via dbus does not work

    - by FlabbergastedPickle
    I am using a proprietary rt3652sta driver for my wireless card. It appears as a ra0 device on the 64-bit Ubuntu 12.04. According to the online documentation the following used to work definitely up to 10.04. dbus-send --system --type=method_call --dest=org.freedesktop.NetworkManager /org/freedesktop/NetworkManager org.freedesktop.DBus.Properties.Set string:org.freedesktop.NetworkManager string:WirelessEnabled variant:boolean:false This however has no effect on the aforesaid wireless card in 12.04. Also, rfkill does not work as it does not even list the wireless button (again, likely due to the wireless driver being proprietary): rfkill list It only lists the hci0 (bluetooth) one and one can block/unblock it accordingly but this has no effect on the wifi. ifup/down also does not work (AFAICT)... And this leaves me with disabling wireless through the network manager applet. However, trying to do so via dbus appears not to work and yet I would like to automate it via a script. Any ideas how I could find out the proper dbus structure for the call? Is this even possible in Ubuntu 12.04?

    Read the article

  • Windows 8 and Cisco AnyConnect client issue

    - by Enrique Lima
    As many of us are doing these days, I have fully moved to Windows 8 on my PCs (laptops and desktops).  And in my role as a consultant I work with many clients, many of them use different vpn technologies.  While pretty much every single vpn client I had installed needed a trick or two to work, well Cisco’s AnyConnect vpn client had some issues.  Installation went well, no problem there.  The problem appeared when I attempted to connect, as I received the following message: Pretty clear what the issue is, right? right??!!?? Doing a bit of research (Google knows!), I cam across the following fix: Using our new favorite shortcut:  Windows Key + X Then Run > regedit. We then Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnva From the image you can tell there are additional characters in the DisplayName that interfere with the device being able to be correctly identified. This is what it looks like originally. We will remove those characters so it looks more like: Close all open windows and attempt your connection.

    Read the article

  • Touchpad is recognized but not working on Toshiba P855-S5312 - Ubuntu 12.10

    - by user107942
    i just made a new fresh install of ubuntu 12.10, everything works nice but the touchpad istn working, it is recognized but it is not working, here a paste bin of what i get when I type "xinput list" http://paste.ubuntu.com/1357219/ b0w@b0w:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Genius Optical Mouse id=9 [slave pointer (2)] ? ? SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Power Button id=8 [slave keyboard (3)] ? TOSHIBA Web Camera - HD id=10 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ? Toshiba input device id=13 [slave keyboard (3)] b0w@b0w:~$

    Read the article

  • Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

    - by nibianaswen
    I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

    Read the article

  • Connected to wireless, but no internet access

    - by boogaloo
    After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

    Read the article

  • Sound not working after installing PCI video card and then removing it

    - by bakhshu
    I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

    Read the article

  • Speed up ADF Mobile Deployment to Android with Keystore

    - by Shay Shmeltzer
    As you might have noticed from my latest ADF Mobile entries, I'm doing most of my ADF Mobile development on a windows machine and testing on an Android device. Unfortunately the Android/windows experience is not as fast as the iOS/Mac one. However, there is one thing I learned today that can make this a bit less painful in terms of the speed to deploy and test your application - and this is to use the "Release" mode when deploying your application instead of the "Debug" mode. To do this you'll first need to define a keystore, but as Joe from our Mobile team showed me today, this is quite easy. Here are the steps: Open a command line in your JDK bin directory (I just used the JDK that comes with the JDeveloper install). Issue the following command: keytool –genkey –v –keystore <Keystore Name>.keystore –alias <Alias Name> -keyalg RSA –keysize 2048 –validity 10000 Both keystore name and alias names are strings that you decide on. The keytool utility will then prompt you with various questions that you'll need to answer. Once this is done, the next step is to configure your JDeveloper preferences->ADF Mobile to add this keystore there under the release tab:  Then for your application specific deployment profile - switch the build mode from debug to release. The end result is a much smaller mobile application (for example from 60 to 21mb) and a much faster deployment cycle (for me it is about twice as fast as before).

    Read the article

  • Authenticate native mobile app using a REST API

    - by Supercell
    I'm starting a new project soon, which is targeting mobile application for all major mobile platforms (iOS, Android, Windows). It will be a client-server architecture. The app is both informational and transactional. For the transactional part, they're required to have an account and log in before a transaction can be made. I'm new to mobile development, so I don't know how the authentication part is done on these platforms. The clients will communicate with the server through a REST API. Will be using HTTPS ofcourse. I haven't yet decided if I want the user to log in when they open the app, or only when they perform a transaction. I got the following questions: 1) Like the Facebook application, you only enter your credentials when you open the application for the first time. After that, you're automatically signed in every time you open the app. How does one accomplish this? Just simply by encrypting and storing the credentials on the device and sending them every time the app starts? 2) Do I need to authenticate the user for each (transactional) request made to the REST API or use a token based approach? Please feel free to suggest other ways for authentication. Thanks!

    Read the article

  • Pandaboard crash on startup or freeze after minutes

    - by Meach
    I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

    Read the article

  • Old Lock Retrofitted for Wireless and Key-free Entry

    - by Jason Fitzpatrick
    What do you do if the old key your landlord gave you is poor fit for your apartment’s lock? If you’re the geeky sort, you build a wireless unlocking module to do the work for you. Instructables user Rybitski writes: The key to my apartment never worked quite right because it is a copy of a copy of a copy. I am fairly certain that the dead bolt is original to the building and the property manager seems to have lost the original key years ago. As a result unlocking the door was always a pain. Changing the lock wasn’t an option, but eliminating the need to use a key was. To that end, he built the device seen in the video above. An Arduino Uno drives a servo which in turn opens the deadbolt. The whole thing is controlled by a simple wireless key fob. Hit up the link below for the full build guide including code. Key Fob Deadbolt [via Hack A Day] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

    Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >