Search Results

Search found 2123 results on 85 pages for 'crossover cable'.

Page 4/85 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• How to connect two ubuntu computers with ethernet cable

  - by Lukasz Zaroda

  I'm trying to connect with ethernet cable two computers - desktop and laptop. What I want to do is transfer a lot of data from one to another. The problem is that I'm doing everything from: How to network two Ubuntu computers using ethernet (without a router)? But after that, ping always gives me "Destination host unreachable". I was searching a while but couldn't figure out what is a reason it doesn't work, maybe it's something about my devices or maybe someone will have another idea. Ethernet cable I got with my router. There is a text printed on it: Aurit Data Cable Cat.5 UTP 26AWG 4PAIR AWM PUC 75°C EIA/TIA 568B It's connecting now my desktop to router, so I can send this question. My desktop: System: Ubuntu 12.04 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) "ethtool -i eth0" output: driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes My laptop: System: Ubuntu 14.04 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08) "ethtool -i eth0" output: driver: alx version: firmware-version: bus-info: 0000:01:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no My iptables are accepting everything. Any ideas why I cannot reach other computer?

  Read the article

• External TV only allows 640x480 using VGA cable

  - by EdC

  I have Ubuntu precise installed on a MacBook Pro. When connecting to an external television using a VGA style cable the highest resolution available seems to be 640x480. I'm using the proprietary NVIDEA Accelerated Graphics Driver (version current) and attempting to setup the TV using the nvidea-settings tool. I know all the equipment supports higher resolutions because of the following: Prior to rebuilding my machine with precise, the same TV, cabel & adapter gave higher resolutions The same machine & TV when used with a HDMI cable allows higher resolutions Windows laptops with the same cable & TV are able to achieve higher resolutions I'm not sure what to look for next, there are some similar FAQ questions but I'm not sufficiently familiar with the areas involved to know if these are my issue or are safe to try. Specifically: colord problem & my monitor resolution 640*480 with no other options! - is the closest, but as I'm having no problems with the main laptop monitor I'm not sure the described symptoms apply. I can't work out from the answer or Bumblebee site how to determine if nvidia optimus applies to my laptop. Why isn't my monitor's native resolution appearing as an option? - suggests configuring X by hand, but doesn't entirely match the symptoms I'm seeing

  Read the article

• Touchpad not working after connecting hdmi cable

  - by user286632

  I had installed Ubuntu 14.04 2 weeks back on my new laptop along side Windows 8. 1. And it was working fine. But yesterday after I connected Ubuntu with my TV using the HDMI cable, the cursor/ pointer stopped working. The pointer is not visible and my touchpad is not working. I connected the hdmi cable with youtube in Firefox. But only the wallpaper was visible on the TV. Also the right click menu, alt tab window, etc was also visible. But the side menu and the Firefox window was not visible. The pointer was visible on the tv and the touchpad was working, I was able to move the pointer. After I removed the HDMI cable, my cursor/pointer disappeared and my touchpad is not responding! ! I tried to restart many times, but still no luck. Its still not visible in the desktop. The pointer is visible in the login screen, but is not responding to the touchpad. I tried to login to my KDE session, there too the pointer is visible but is not responding to the touchpad. It is not moving.

  Read the article

• URL to reboot a WebSTAR DPC2100R2 cable modem with curl?

  - by jtimberman

  Does anyone know what the magic URL is for rebooting a WebSTAR DPC2100R2 with curl? I used to have a SurfBoard, and the curl command: curl http://192.168.100.1/reset.htm?reset_modem=Restart%20Cable%20Modem Would reset the modem. Sure, I can go power cycle it manually, but it's in the basement and I'm lazy :-). I did find out the URL to elevate the access permission, but nothing about rebooting/resetting yet.

  Read the article

• URL to reboot a WebSTAR DPC2100R2 cable modem with curl?

  - by jtimberman

  Does anyone know what the magic URL is for rebooting a WebSTAR DPC2100R2 with curl? I used to have a SurfBoard, and the curl command: curl http://192.168.100.1/reset.htm?reset_modem=Restart%20Cable%20Modem Would reset the modem. Sure, I can go power cycle it manually, but it's in the basement and I'm lazy :-). I did find out the URL to elevate the access permission, but nothing about rebooting/resetting yet.

  Read the article

• Is there an easy way to straighten network cable individual wire pairs?

  - by johnny

  Is there any easy way to straigten the pairs in a cat 6 cable? I've been making network cables lately, and I was wondering if there was a trick other than just a lot of practice for straigtening out the small wires. Thank you.

  Read the article

• How do I identify pin 1 on a rippon cable connector?

  - by Axxmasterr

  I have a ribbon cable that is not labeled and does not have a notch to prevent it from being installed backwards. How can I identify which pin is #1 on the connector?

  Read the article

• Implementing crossover in genetic programming

  - by Name

  Hi, I'm writing a genetic programming (GP) system (in C but that's a minor detail). I've read a lot of the literature (Koza, Poli, Langdon, Banzhaf, Brameier, et al) but there are some implementation details I've never seen explained. For example: I'm using a steady state population rather than a generational approach, primarily to use all of the computer's memory rather than reserve half for the interim population. Q1. In GP, as opposed to GA, when you perform crossover you select two parents but do you create one child or two, or is that a free choice you have? Q2. In steady state GP, as opposed to a generational system, what members of the population do the children created by crossover replace? This is what I haven't seen discussed. Is it the two parents, or is it two other, randomly-selected members? I can understand if it's the latter, and that you might use negative tournament selection to choose members to replace, but would that not create premature convergence? (After a crossover event the population contains the two original parents plus two children of those parents, and two other random members get removed. Elitism is inherent.) Q3. Is there a Web forum or mailing list focused on GP? Oddly I haven't found one. Yahoo's GP group is used almost exclusively for announcements, the Poli/Langdon Field Guide forum is almost silent, and GP discussions on general/game programming sites like gamedev.net are very basic. Thanks for any help you can provide!

  Read the article

• Why is the VGA Cable attached to new monitors

  - by ahsteele

  When opening a new monitor I am amazed that the VGA cable is always attached. Even with new high end monitors that include Display Port and DVI cables the old VGA cable is always attached while the others are just left in the box. What is the reasoning behind attaching a cable in the first place and why the VGA cable in particular?

  Read the article

• What cable to connect Inspiron 1720 to HDMI TV?

  - by Bernhard Hofmann

  Hi I'm a little confused to say the least when it comes to video formats and protocols. I'd like to view my laptop output on my HD TV. The TV has HDMI, S-Video, and RCA inputs. My laptop has a VGA female port on the side for driving a 2nd monitor, and an S-VHS output at the back. No, it has no DVI, which I've heard is a poor decision from DELL, and even poorer decision on my part to buy it. Can I get true HD output from this to my TV? What cable do I need, or would I need a converter? Any other suggestions are also welcome, such as how to get something close to HD on my TV. Thanks! Bernhard

  Read the article

• Monitor displays "No VGA signal" "Check DVI cable" after installing motherboard drivers

  - by user1604220

  I bought computer with all of the needed parts, got everything sorted out, installed windows 7 but my CD-ROM doesn't fit my motherboard. So I had to download the driver manually and install it using USB disc. My motherboard: ECS elitegroup H61H2-M2, I downloaded it's drivers, installed the BIOS map or something, and then the computer forced a reboot after it was complete, after the reboot my monitor just stopped working and displayed No VGA signal, No DVI cable I think I've just installed the wrong driver, well but how can I sort it out? This is the driver I installed. On the book, it tells me to install the drivers, without the driver it won't see the Internet connection cable. I'm 100% sure there is nothing wrong with the monitor or it's cables. it stopped working exactly after the reboot after the installation.

  Read the article

• Cutting the Cable: The State of Internet-based TV [Infographic]

  - by Jason Fitzpatrick

  If you’ve been turning your cable box on less and watching more shows online, you’re certainly not alone. Check out this infographic look at the state of TV distribution in the digital age to see how everyone is getting their TV fix. People are watching more media online, less from traditional distribution channels, and in a more mobile and selective way than ever before. Hit up the link below to check out the full infographic with a shake down of how media consumption has shifted and who is jockeying for a slice of the consumers’ attention. Cutting the Cable: The State of Internet-based TV [Daily Infographic] How to Enable Google Chrome’s Secret Gold IconHow to Create an Easy Pixel Art Avatar in Photoshop or GIMPInternet Explorer 9 Released: Here’s What You Need To Know

  Read the article

• Can't install wireless driver or get ubuntu to recognize ethernet cable

  - by Catherine

  I'm brand new to Ubuntu and I'm tearing my hair out trying to figure out how to connect to the internet. When I try to activate the Broadcom STA wireless driver, it says "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log." So I try the steps detailed here http://ubuntuforums.org/showthread.php?t=1967515&highlight=jockey Problem is, I can't connect to the internet via ethernet cable either. I tested the cable with another laptop and it works just fine. I don't know what to do. Any help is greatly appreciated.

  Read the article

• Cable connection takes a lot to establish

  - by user162237

  I've just installed Xubuntu on my computer. It's all OK, but I have a problem with the internet connection: when I boot the PC and I login into Xubuntu it says to me "Cable connection disconnected" or "No cable connection". After a while (like 40 seconds) it connects to the internet and then I'm able to surf the net. I was wondering: why it takes so long to establish a connection? I had no problems of this kind on Windows or other distributions. EDIT: here are some outputs: http://pastebin.com/8nWFC5BV

  Read the article

• Ubuntu 12.04 Freezes after removing the HDMI cable or changing settings

  - by euDennis

  I'm using an fresh install of Ubuntu 12.04 and I'm having some problems with HDMI. I usually use it with my TV, but since the update isn't working any more. Sometimes in 11.10 I had to execute a script to get the video and sound to work in HDMI, but it was OK. Since the update, when I connect the HDMI cable, it works, but if I make any change in the display settings (like resolution, monitor position, etc,) it freezes. And if I don't change anything, it's working in both monitors, but when I remove the cable, it freezes and even the ctrl+alt+f2 shortcut works. Any ideas for fixing this? I Googled and only found many people having problems, usually with sound.

  Read the article

• Networking Home Office

  - by Matt

  I'm in the process of building an office in my garden. It's about 25m away from my house. I'd like to run a wired network connection to the office. I'd rather not go down the powerline route, as speeds don't seem great, and I'm likely to want to be moving a lot of data around on the internal network. I have an electrician who is running armoured electrical cable to the office, and is providing conduit for me to run network cable. My questions are: 1) What type of cable to run 2) How I terminate/connect it at both ends I could get something like armoured cat6 utp solid core (like this: http://www.netstoredirect.com/cat6-cable/289166-external-armoured-cat6-utp-solid-cable-price-per-metre.html) which seems fairly robust, but then I have to terminate it. Additionally, where the cable enters my house, there is about another 15m to where my router is situated. I also read this artice: http://www.audioholics.com/audio-video-cables/bjc-cat-network-cable-quality-interview which scared me into realising I don't know what I'm doing!! particularly with termination. Or I could get an "cat6 external patch cable" (e.g http://www.netstoredirect.com/rj45-network-cables/239231-external-cat6-utp-ldpe-rj45-patch-leads.html) and run that in the conduit, and work out how to terminate it at the house end. At the office end I guess I can just plug it into a switch. Any help? Thanks

  Read the article

• Crossover LAN connection between Ubuntu And Windows 7 is not working

  - by brett

  my question is closely related to: How do I connect Ubuntu 10.04 and Windows 7 with an Ethernet cable? What I am after is: Windows 7-------wireless-----\ Wifi router Ubuntu 10.04----wireless-----/ Windows 7-------wireless-----\ | cross_over_cable Wifi router | Ubuntu 10.04----wireless-----/ What I did was On Windows edit system32\drivers\etc\hosts Add the following line: 192.168.253.2 my_ubuntu_computer_name_&-wired //?not sure if this is right On Ubuntu: sudo gedit /etc/hosts Add the following line: 192.168.253.1 my_pc_computer_name&-wired //?not sure if this is right and then Ubuntu 12.04 as the host Right click on the Network Manager applet, click Edit Connections... In the Wired tab, click Auto eth0, then click Edit... In the IPv4 Settings tab, change Method: to Shared to other computers. Click Apply and enter your password when it asks you. Close everything and reboot. Plug the Ethernet cable into both computers. But, I can connect to my windows network folders from ubuntu via wifi I can't connect to my ubuntu network folders from windows via wifi(in fact this bit was working before - so my wifi connection is worse) my ubuntu Auto Ethernet seems to be on From Ubuntu eth0 Link encap:Ethernet HWaddr 00:11:2f:f3:43:8d inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:2fff:fef3:438d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:172 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:27279 (27.2 KB) Interrupt:19 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1147 errors:0 dropped:0 overruns:0 frame:0 TX packets:1147 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94380 (94.3 KB) TX bytes:94380 (94.3 KB) wlan0 Link encap:Ethernet HWaddr 00:03:c9:e9:6f:bf inet addr:10.1.1.7 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::203:c9ff:fee9:6fbf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13186 errors:0 dropped:0 overruns:0 frame:0 TX packets:12187 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1598882 (1.5 MB) TX bytes:1189555 (1.1 MB) From Windows: Windows IP Configuration Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : BoB Link-local IPv6 Address . . . . . : fe80::ecf7:c445:3725:b9c1%12 IPv4 Address. . . . . . . . . . . : 10.1.1.4 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.1.1.1 Tunnel adapter Local Area Connection* 15: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:1423:3ae3:f5fe:fefb Link-local IPv6 Address . . . . . : fe80::1423:3ae3:f5fe:fefb%23 Default Gateway . . . . . . . . . : :: Tunnel adapter isatap.BoB: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : BoB Tunnel adapter isatap.{D0C8EBA1-335D-4620-8570-6C36E8786D72}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

  Read the article

• Establish direct cable connection between Windows 8 PCs in home network

  - by Marie. P.

  I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

  Read the article

• Font corruption Ubuntu 12.04 Mirosoft Office 2007 / Google earth & Adobe

  - by oneofthemany

  When using MS office 2007 applications I get lines going through text fields on excel spreadsheets and also when I open or save any MS Office document. I am using crossover to run office but I'm also using ttf-mscorefonts for Adobe and Google earth. It appears that sense I upgraded to 12.04 from 11.10 the ms fonts clash. Because if I purge ttf all is OK on MS Office but then Adobe and Google are unreadable Any ideas? Thanks Sean

  Read the article

• Why is my cat5e cable not okay?

  - by torbengb

  My LAN cable seems to work (indicator LED lights up) but the computer can't find a connection. What's wrong? Setup: I had to run a network cable from a router in one room to a computer to another room, through a hole in the wall that was too small to pass the RJ-45 plug through. The plug was cut off and the cable passed through the wall. Then a new plug was crimped on using this detailed explanation. The connection didn't work because the (factory-made!) plug in the other end used a non-standard wire order. I crimped a new plug on again, using the exact same order of the factory-made plug. The LED indicator lights up on both ends, but the computer cannot find a connection. What can be wrong? How can I find out? I don't have a cable tester. By visually inspecting my new plug, I think it's good; the wire order matches the other end, and all wires are all the way inside the plug and reach the connector piece. I've used the cable before (with both factory-made ends) so i don't think that the cable itself has a defect.

  Read the article

• External SATA drive does not work without the optional USB cable *also* connected

  - by Software Monkey

  I have Vantec NST-260SU external eSATA/USB drive enclosure (which came with an optional separate power supply) connected to a relatively new Windows 7 computer. The drive should work as a SATA drive with either the separate power supply or using a USB cable solely for power. I would prefer to use the external power supply because I have used all my rear USB ports. Now, if I connect both the eSATA and USB cable, then: The drive shows in the BIOS list of AHCI drives (and not in the list of attached USB devices). Everything I can see about it in Computer Management seems to show it as a SATA driver (for example, it shows as "Location 0 (Channel 5, Target 0, Lun 0)" like my other SATA drives (and not "on USB Mass Storage Device" like my USB flash-drives). It seems very fast, very much faster than my USB flash drives. However, if I disconnect the USB cable and attach the power adapter instead, the drive does not show in the BIOS list and cannot be seen by Windows. The power LED on the enclosure is lit, and the drive enclosure becomes warm after running for a bit, so I am sure it is receiving power. Does anyone know if this device requires both the USB and eSATA cable, and if so, why? Or is there possibly something I need to do to reset the enclosure to not need the USB - the install instructions are pretty clear that you must connect the SATA cable before connecting the USB cable in order for the drive to function as SATA, which I am sure I did. PS: I have reviewed the small manual which came with it, which has not been of help.

  Read the article

• Curious enigma of a network cable / connection / quality

  - by Foo Bar

  So, the situation is like this: I'm renting an apartment in a large house and I'm sharing internet with the landlord who lives downstairs. The internet is (in my best guess) optical 20/20Mbit. I don't know how it's all wired in his flat (haven't been there / seen it). Anyway, in my flat comes a cable which seems to be connected directly to the optic to ethernet router (and the password is the default one, so I have access, he he). There was a switch connected to that and to wires that go around the flat, and the wiring is terrible. It's even mixing phone and ethernet, and from what I see some cables are even interconnected!? Anyways, this cable that comes to my flat is very short. I can barely connect my computer on it, but if I do, I seem to get decent speed / performance. Not great, but decent. If, however, I connect switch to it (tried 2 different switches and a wifi switch) it's all blinking but I can't even connect to 192.168.1.1 (the router). DHCP fails, ping is losing 80-100% of replies. So I connected this cable directly to the other cable which goes to my work room, with a connector that has two female jacks and no electronics. Now when I connect my computer in my room, again, the performance is decent. When I connect WRT54GL (with tomato, DHCP disabled) to it and I plug a cable in this WRT and to my computer... the performance is gone. Download seems okay on Speedtest, but upload is .2Mbps and it's connecting forever. So what kind cable troll am I having here? Any ideas?

  Read the article

• Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

  - by Sulliwane

  I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

  Read the article

• 10.10 - No wired connection (cable plugged)

  - by Roland Burda

  So, my problem is that I have a recently bought laptop (Dell Inspiron M5040) with Ubuntu 10.10 installed on it, and the wired connection isn't working. The wireless connection is ok, it works. But the LAN isn't being recognized when the cable is plugged in. I've found an article, but I'm not sure whether it is a good approach for my case: http://www.zyxware.com/articles/2680/solved-wired-connection-eth0-not-detected-in-ubuntu-12-04

  Read the article

• Explore What';s Inside of a Fiber Optic Cable

  Fiber optic cable (or optical fiber) is unlike most types of cables; it draw on light instead of electricity to transmit signals. As you have already known, light is the fastest method of transmittin... [Author: Rahim Bidgoli - Computers and Internet - April 02, 2010]

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >