Search Results

Search found 12431 results on 498 pages for 'errors'.

Page 4/498 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • GWT: Generate more complete crawl error report

    - by Mike
    I'm a developer in charge of managing Webmasters and related issues (including correcting crawl errors) for dozens (hundreds, maybe?) of active sites and as part of my duties I create a report of every discrepancy, including all pages generating a 404 and all pages that link to those pages. Currently within Webmaster Tools I'm able to download a csv file of all pages with a 404 response, but I'm then having to manually click on every single one of those links and copy the "linked from" field to paste into my spreadsheet. This is extremely tedious and seems unnecessary; I would expect the ability to download all that data at once. I'm ultimately looking for the end result of one csv file that has every url with a 404, but also has every url that links to each one of them. Am I overlooking this functionality somewhere or does anyone have a good solution? Edit 1 (2/11/2013): Example of what the csv output looks like now: URL,Response Code,News Error,Detected,Category http://www.abcdef.com/123.php,404,,11/12/13,Not found http://www.abcdef.com/456.php,404,,11/12/13,Not found Which is great, but let's say 123.php has 5 pages that link to it. Now I have to duplicate that row in my spreadsheet 4 more times, then go into Webmasters, get all the url's that link to the page, and add that data to my spreadsheet. The output I would prefer: URL,Response Code,Linked From,News Error,Detected,Category http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage1.php,,11/12/13,Not found http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage2.php,,11/12/13,Not found http://www.abcdef.com/123.php,404,http://www.ghijkl.com/naughtypage3.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage1.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage2.php,,11/12/13,Not found http://www.abcdef.com/456.php,404,http://www.ghijkl.com/naughtypage3.php,,11/12/13,Not found Note the (hypothetical) addition of a "Linked From" column, as well as the fact there are only 2 unique URL's now (like before) but all of the "Linked To" pages are shown in one report. Edit 2 (2/12/2013): To clarify, my question is less about detecting and correcting 404's, but more about generating a report of what Google has listed as errors. Oftentimes, these errors aren't even valid anymore but I still need documentation to show that Google detected a problem and that problem is now fixed. Many of the "linked from" url's I find are actually outdated, cached resources. For example, I'll frequently see that the linked-from url is the sitemap, which is actually an old sitemap cached by Google that points to an old page. Neither the sitemap or old page exist, but they still appear in my crawl error reports because they are cached resources.

    Read the article

  • How do I fix these compiler errors in Apple Crunch?

    - by BluFire
    I've been looking around and I finally got the full source code for a game called Apple-Crunch from Google Code. But when I put it into my project, the source code included so many errors in the class files such as: cannot be resolved into a type the constructor is undefined the method method() is undefined for the type Sprite class.java I downloaded the source directly from the command-line and noticed errors popping up on my project. Since I couldn't figure out how to import the actual folder into my workspace (it wouldn't show up on existing projects) I decided to copy and overwrite the folders into the project. The errors were still there so I looked at the class files and noticed that the classes with errors extended from RokonActivity. I then proceeded to add to the libs folder the Rokon library in hopes to fix the errors. Sadly it didn't work and now I don't what to do to fix the errors. How do I fix the errors without having to manually change the code? The source code should be fully functional so why are there errors?

    Read the article

  • Ubuntu Server 11.04 update 404 errors

    - by Ryan
    I am an ubuntu amateur trying to set up an ubuntu 11.04 server on a tower. I want to install things like ssh client/ server and gksudo on it but I get errors when trying to do so. I tried to update, but I get 404 errors. I have already tried to install fix404 but it seems there is no "app-add" command... After many hours of failure, I turn to you, wise people of the internet. You are my last hope. help?

    Read the article

  • April 24 Webcast: Procurement: How to Solve Errors with Receiving Transactions

    - by Oracle_EBS
    ADVISOR WEBCAST: How to Solve Errors with Receiving TransactionsPRODUCT FAMILY: E-Business : Procurement April 24, 2012 at 14:00 UK / 15:00 CET / 06:00 am Pacific / 7:00 am Mountain / 9:00 am Eastern/ 3:00 pm Egypt Time Session description that sets customer expectations such as This one-hour session is recommended for technical and functional users need to know about verifying the receiving transactions errors, troubleshoot it and fix it from the application forms and the back-end. TOPICS WILL INCLUDE: Setup and normal transactions The cause of (RVTTH-115B, RVTTH-115D, RVTTH-115F, RVTTH-115H, RVTTH-115J) and how to identify it The troubleshooting and solution of this issue in a non WMS org The solution of this issue in WMS org A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services.   Current Schedule can be found on Note 740966.1 Post Presentation Recordings can be found on Note 740964.1

    Read the article

  • Tales from the Coal Face - Reporting errors

    - by TATWORTH
    One of the questions that comes up frequently, is "Is it worthwhile to report errors?".Last weekend, after installing the latest StyleCop I loaded up my copy of Power Collections. I found that StyleCop was now correctly picking up a lot of missing "this." statements, however there were now a number of false positives. Anticipating the need to submit sample code, I cleaned the solution and zipped it up.I reported this at http://stylecop.codeplex.com/discussions/357319.  The stylecop administrator promoted this report to a work item (see http://stylecop.codeplex.com/workitem/7285) and I uploaded the previously prepared Zip file. The StyleCop team was able to locate the problem and it is "Fixed in upcoming 4.7.27".The conclusion:Report errors!  Prepare sample code illustrating the error.

    Read the article

  • How to teach your users/customers to send better error descriptions

    - by ckeller
    I often have to deal with customers or users which are reporting errors in applications. Most of the time their content is something useless as ERROR!!! x does not work without much more information. For resolving the issue I have to request every single detail of them, which often is more time consuming than fixing the issue itself. Other send information in formats which are not ideal, like screenshots (of data records, not of errors) although they could send a link (we have access to the systems) and so on. How do you tell your users/customers to describe the problems with more details so that the whole process could be easier for both sides? edit This question is more about the social skills, than how to achieve programmatic collection of logs and error information. I'm aware of the fact that this should be part of good software design.

    Read the article

  • New and Improved Patch for FRM-40654 Errors in Purchase Orders and Requisitions

    - by user793044
    Development has modified the code in purchase orders and requisition forms to prevent error FRM-40654 when there are trailing spaces in the tables for most of the fields.  After applying the patch, the form will still display the error but a requery will allow you to save the transaction. For the scenarios not covered in the fix, the FND log will now display the specific field that causes the error.  This an example of the FND log for one document where the note_to_vendor has trailing spaces: Form note_to_vendor oldvalue Database  note_to_vendor newvalue Failed first if statement when comparing fields FRM-40654: Record has been updated. Requery block to see change. This new patch includes the fix in Patch 14204845:"In Oracle Purchasing, leading or trailing spaces in po lines data was resulting in errors".  For more information on FRM-40654 errors see the patching section of Note 1203796.1. Be proactive and apply Patch 14479586:R12.PO.B for 12.1.3 or Patch 14569747 for 11.5.10 now!

    Read the article

  • What do these errors mean? ISOC++ forbids assignment of arrays...

    - by xunlinkx
    I'm trying to compile some code on one of our systems for our DBA...I've edited the makefiles to include the pertinent libraries listed in the documentation, but I keep getting these errors... Can you discern any obvious problems from my command lines in reference to the errors listed? Thank you! make -f /u01/app/banner/ban8/TEST3/links/Makefile_tm_linux64_redhat5_ban8.mk gcc -m64 -D_NOFIXARGPTR -fpic -shared -DTMCILIB_EXPORTS -D_TMUNICODE -I/usr/local/ban_icu -I/usr/local/src/icu/source/i18n/ -I/usr/local/src/icu/source/common/ -I/usr/local/src/icu/source/extra/ustdio/ -I/usr/local/src/icu/source/io -L/usr/lib64 -L/usr/lib -L/usr/local/src/icu/source/data/ -L/usr/local/src/icu/source/data/out/ -L/usr/local/src/icu/source/tools/toolutil/ -L/usr/lib/im/icuconv/ -L/usr/local/lib/ -L. -licui18n -licudata -licuuc -licu-toolutil -licuio msgfmttm.cpp umsgtm.cpp tmcilib.cpp -o /u01/app/banner/ban8/TEST3/general/exe/libtmciuc.so umsgtm.cpp: In function ‘void fixArgPtr(const UChar*, __va_list_tag (*)[1])’: umsgtm.cpp:158: error: array must be initialized with a brace-enclosed initializer umsgtm.cpp:194: error: ISO C++ forbids assignment of arrays umsgtm.cpp: In function ‘int32_t tmumsg_vformat(void*, UChar, int32_t, __va_list_tag*, UErrorCode*)’: umsgtm.cpp:305: error: cannot convert ‘__va_list_tag**’ to ‘__va_list_tag ()[1]’ for argument ‘2’ to ‘void fixArgPtr(const UChar, __va_list_tag (*)[1])’ tmcilib.cpp: In function ‘int tmprintf(TMBundle*, const UChar*, ...)’: tmcilib.cpp:743: error: array must be initialized with a brace-enclosed initializer tmcilib.cpp: In function ‘int tmfprintf(TMBundle*, UFILE*, const UChar*, ...)’: tmcilib.cpp:757: error: array must be initialized with a brace-enclosed initializer tmcilib.cpp: In function ‘int tmsprintf(TMBundle*, UChar*, const UChar*, ...)’: tmcilib.cpp:808: error: array must be initialized with a brace-enclosed initializer

    Read the article

  • Controlling soft errors and false alarms in SSIS

    - by Jim Giercyk
    If you are like me, you dread the 3AM wake-up call.  I would say that the majority of the pages I get are false alarms.  The alerts that require action often require me to open an SSIS package, see where the trouble is and try to identify the offending data.  That can be very time-consuming and can take quite a chunk out of my beauty sleep.  For those reasons, I have developed a simple error handling scenario for SSIS which allows me to rest a little easier.  Let me first say, this is a high level discussion; getting into the nuts and bolts of creating each shape is outside the scope of this document, but if you have an average understanding of SSIS, you should have no problem following along. In the Data Flow above you can see that there is a caution triangle.  For the purpose of this discussion I am creating a truncation error to demonstrate the process, so this is to be expected.  The first thing we need to do is to redirect the error output.  Double-clicking on the Query shape presents us with the properties window for the input.  Simply set the columns that you want to redirect to Redirect Row in the dropdown box and hit Apply. Without going into a dissertation on error handling, I will just note that you can decide which errors you want to redirect on Error and on Truncation.  Therefore, to override this process for a column or condition, simply do not redirect that column or condition. The next thing we want to do is to add some information about the error; specifically, the name of the package which encountered the error and which step in the package wrote the record to the error table.  REMEMBER: If you redirect the error output, your package will not fail, so you will not know where the error record was created without some additional information.    I added 3 columns to my error record; Severity, Package Name and Step Name.  Severity is just a free-form column that you can use to note whether an error is fatal, whether the package is part of a test job and should be ignored, etc.  Package Name and Step Name are system variables. In my package I have created a truncation situation, where the firstname column is 50 characters in the input, but only 4 characters in the output.  Some records will pass without truncation, others will be sent to the error output.  However, the package will not fail. We can see that of the 14 input rows, 8 were redirected to the error table. This information can be used by another step or another scheduled process or triggered to determine whether an error should be sent.  It can also be used as a historical record of the errors that are encountered over time.  There are other system variables that might make more sense in your infrastructure, so try different things.  Date and time seem like something you would want in your output for example.  In summary, we have redirected the error output from an input, added derived columns with information about the errors, and inserted the information and the offending data into an error table.  The error table information can be used by another step or process to determine, based on the error information, what level alert must be sent.  This will eliminate false alarms, and give you a head start when a genuine error occurs.

    Read the article

  • SQL SERVER – Resolving SQL Server Connection Errors – SQL in Sixty Seconds #030 – Video

    - by pinaldave
    One of the most famous errors related to SQL Server is about connecting to SQL Server itself. Here is how it goes, most of the time developers have worked with SQL Server and knows pretty much every error which they face during development language. However, hardly they install fresh SQL Server. As the installation of the SQL Server is a rare occasion unless you are DBA who is responsible for such an instance – the error faced during installations are pretty rare as well. I have earlier written an article about this which describes how to resolve the errors which are related to SQL Server connection. Even though the step by step directions are pretty simple there are many first time IT Professional who are not able to figure out how to resolve this error. I have quickly built a video which is covering most of the solutions related to resolving the connection error. In the Fix SQL Server Connection Error article following workarounds are described: SQL Server Services TCP/IP Settings Firewall Settings Enable Remote Connection Browser Services Firewall exception of sqlbrowser.exe Recreating Alias Related Tips in SQL in Sixty Seconds: SQL SERVER – FIX : ERROR : (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server) (Microsoft SQL Server, Error: ) SQL SERVER – Could not connect to TCP error code 10061: No connection could be made because the target machine actively refused it SQL SERVER – Connecting to Server Using Windows Authentication by SQLCMD SQL SERVER – Fix : Error: 15372 Failed to generate a ser instance od SQL Server due to a failure in starting the process for the user instance. The connection will be closed SQL SERVER – Dedicated Access Control for SQL Server Express Edition – An error occurred while obtaining the dedicated administrator connection (DAC) port. SQL SERVER – Fix : Error: 4064 – Cannot open user default database. Login failed. Login failed for user What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • Upgraded Linux, now CMS Made Simple is spewing errors

    - by Paul Tomblin
    I upgraded my host from Debian Lenny to Debian Squeeze, and now my CMS Made Simple site is spewing PHP errors all over the screen. I thought I'd upgrade the CMS because I haven't done so in a while, but Google Chrome tells me that the CMS Made Simple site is infested with malware. What are my options now? Example errors: Deprecated: Assigning the return value of new by reference is deprecated in /www/danmurn/cms/include.php on line 73 Deprecated: Assigning the return value of new by reference is deprecated in /www/danmurn/cms/include.php on line 162 Deprecated: Assigning the return value of new by reference is deprecated in /www/danmurn/cms/include.php on line 240 Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /www/danmurn/cms/include.php:73) in /www/danmurn/cms/include.php on line 34 Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /www/danmurn/cms/include.php:73) in /www/danmurn/cms/include.php on line 34 Deprecated: Function set_magic_quotes_runtime() is deprecated in /www/danmurn/cms/include.php on line 62 Deprecated: Assigning the return value of new by reference is deprecated in /www/danmurn/cms/lib/classes/class.global.inc.php on line 184 Deprecated: Assigning the return value of new by reference is deprecated in /www/danmurn/cms/lib/classes/class.global.inc.php on line 196

    Read the article

  • How to fix "apt-get upgrade" errors?

    - by mohamad farid bin abdullah
    I get these errors when I try to upgrade the packages installed on my Ubuntu system: m@m-desktop ~ $ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up drbd8-source (2:8.3.7-1ubuntu2.3) ... Removing old drbd8-8.3.7 DKMS files... ------------------------------ Deleting module version: 8.3.7 completely from the DKMS tree. ------------------------------ Done. Loading new drbd8-8.3.7 DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i386 Building initial module for 2.6.35-22-generic Error! Bad return status for module build on kernel: 2.6.35-22-generic (i386) Consult the make.log in the build directory /var/lib/dkms/drbd8/8.3.7/build/ for more information. dpkg: error processing drbd8-source (--configure): subprocess installed post-installation script returned error exit status 10 dpkg: dependency problems prevent configuration of drbd8-utils: drbd8-utils depends on drbd8-source; however: Package drbd8-source is not configured yet. dpkg: error processing drbd8-utils (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: drbd8-source drbd8-utils E: Sub-process /usr/bin/dpkg returned an error code (1) m@m-desktop ~ $

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Updated Intel display driver causing errors when booting

    - by cdysthe
    I upgraded to to Graphics Installer 1.0.6 on my Ubuntu 14.04 and installed the drivers using the Intel Graphics Installer. The laptop is Intel Ivybridge powered with Intel HD graphics. It Optimus but I have disabled the Nvidia card in bios. The Intel Graphics Installer installs the package i915-3.15-3.13-dkms.deb which I assume is the updated driver. It causes a bunch of error messages when I boot. Here are the relevant errors from dmesg when I boot: [ 7.206151] drm: module verification failed: signature and/or required key missing - tainting kernel [ 7.208045] drm: module has bad taint, not creating trace events [ 7.336470] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 7.393854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013) [ 7.393855] [drm] Driver supports precise vblank timestamp query. [ 7.393921] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.505798] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 7.507233] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 7.944183] [drm:cpt_serr_int_handler] ERROR PCH transcoder A FIFO underrun [ 8.368479] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.368480] i915 0000:00:02.0: registered panic notifier [ 8.818416] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off What could the problem be and will it affect performance? I tried to remove the package and the errors went away but I'm then running and older driver I assume?

    Read the article

  • Fix 403 errors in Google Webmaster Tools

    - by Justin
    Hi Team, I have a domain that has "fallen off a cliff" for searches in Google. Searches that used to be in position 1-4 are now gone from page 1. The same search in Bing shows the typical position expected (top 5 results). In reviewing Google Webmaster Tools, I am seeing two problems: 1. The Sitemap is reporting two errors: General HTTP error: HTTP 403 error (Forbidden) URLs not accessible However, the URL they provide as "no accessible" is accessible. I can click the link Google provides and it works fine. There are 6,000 crawl errors of type 403. Again, most of these pages that have 403 are accessible in my browser (tried various browsers as well). About half are from January, the other half from November. There are no IP-specific firewall rules on ports 80 and 443 that could block the goolgebot Using the user agent switcher add-on for FF I confirmed that the page loads when the user agent is the googlebot I an confirm that most of the pages reported as 403 are accessible. A search of just "site:thedomain.com" does confirm there are over 9,000 in the index. But most searches don't return the site. I believe the 403 issues are the cause of the fall in search rankings, but I can't seem to find any information online with ideas about how to address this. Any ideas? jpe

    Read the article

  • Web master tools is throwing out 404 errors on link not on page

    - by plantify
    Webmaster tools is showing thousands of 404 errors, where pages on the site are referring to another incorrect url. For example, URL not found www.plantify.co.uk/shop/=, linked from http://www.plantify.co.uk/shop/gift-voucher and http://www.plantify.co.uk/shop/special-plant-offers. I obviously have checked the source and cannot find any references to this link on any page. The only consistent issue is that it only seems to report this error on pages with two section i.e. www.plantify.co.uk/shop does not report any error whilst all pages with www.plantify.co.uk/shop/xxx (where xxx can be several different pages such as gift-voucher) all report this. I cannot seem to duplicate this error. I have run a link checker (we use Screaming Frog) and it does not report this error. I have fetched these pages as a bot, and these do not report this error. I am at a total loss. I cannot even duplicate the issue, but it is most definitely an issue, as Webmaster Tools is reporting new errors every day. Is this perhaps google bot doing its own thing?

    Read the article

  • Errors when installing updates

    - by user71613
    I am getting the following errors when installing updates. They started to appear after I upgraded my system to 12.04. Errors were encountered while processing: samba-common samba-common-bin samba grub-pc grub-gfxpayload-lists Setting up samba-common (2:3.6.3-2ubuntu2.2) ... perl: error while loading shared libraries: libperl.so.5.12: cannot open shared object file: No such file or directory dpkg: error processing samba-common (--configure): subprocess installed post-installation script returned error exit status 127 dpkg: dependency problems prevent configuration of samba-common-bin: samba-common-bin depends on samba-common (>= 2:3.4.0~pre1-2); however: Package samba-common is not configured yet. dpkg: error processing samba-common-bin (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of samba: samba depends on samba-common (= 2:3.6.3-2ubuntu2.2); however: Package samba-common is not configured yet. samba depends on samba-common-bin; however: Package samba-common-bin is not configured yet. dpkg: error processing samba (--configure): dependency problems - leaving unconfigured Setting up grub-gfxpayload-lists (0.6) ... Setting up grub-pc (1.99-21ubuntu3.1) ... perl: error while loading shared libraries: libperl.so.5.12: cannot open shared object file: No such file or directory dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 127 Any ideas how to fix this?

    Read the article

  • Using "gedit", a string of errors occours

    - by Kumuluzz
    I'm trying to program some small programs in C in terminal and gedit. But everytime i use gedit then a string of errors occours. When i open a new file nothing happens. But in the exact same moment i save the file, then a string of erros coour. Also if i open an already existing file (not a new one), then when the gedit window opens the old file all the lines of errors are writen. In both cases in less than a second and nothing more happens. An example to the error: "error: line 35272: 0 is wrong flag id". They are all similar to this, except the line number is different. There are like 50 of them. I'm running 11.10, just installed it a couple of days again (yes, i'm a newbie) and i've updated all the files recently. I've tried reinstalling gedit via: sudo apt-get --reinstall install gedit It kinda made it worse, now a lot of the lines are shown twice. So now it goes (this is a copy of the first lines of error): error: line 6787: 0 is wrong flag id error: line 10034: 0 is wrong flag id error: line 10034: 0 is wrong flag id error: line 11351: 0 is wrong flag id error: line 11351: 0 is wrong flag id error: line 11849: 0 is wrong flag id error: line 11849: 0 is wrong flag id error: line 15609: 0 is wrong flag id error: line 15609: 0 is wrong flag id error: line 19814: 0 is wrong flag id

    Read the article

  • The number of soft 404 errors is increasing because of redirects to the home page

    - by Stevie G
    I have an increase in soft 404 errors. Using Apache in my .htaccess file I have: Redirect 301 /test.html? /page/pop/test Redirect 301 /about.html? /about I have also tried: Redirect 301 http://www.example.co.za/test.html? http://www.example.co.za/services/test however whenever I go to: http://www.example.co.za/test.html http://www.example.co.za/about.html it just redirects to the home page I also have: RewriteRule ^.*$ index.php [NC,L] in .htaccess

    Read the article

  • Suddenly I have started getting 404 wordpress errors

    - by rikki
    Suddenly I have started getting 404 error on Google Webmaster. The backend is wordpress. 404 link is http://digitalanalog.in/2011/07/05/augmented-reality-interior-designer-kinect-hack/1345295070000/1345781600000 and it is pointing from this page http://digitalanalog.in/2011/07/05/augmented-reality-interior-designer-kinect-hack/1345295070000/ (this url has been automatically generated. Have no clue how this url exist) I am getting 404 errors of the similar pattern on all the pages

    Read the article

  • Device or resource busy errors when setting up a RAID array

    - by JGazlyVFX
    I'm trying to create a Raid array and these are the errors I keep getting. I have repartitioned the drives several times. root@BitchStewie:/dev# sudo mdadm --verbose --create /dev/md1 --chunk=64 --level=0 --raid-devices=12 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 /dev/sdh1 /dev/sdi1 /dev/sdj1 /dev/sdk1 /dev/sdl1 /dev/sdm1 mdadm: super1.x cannot open /dev/sdb1: Device or resource busy mdadm: ddf: Cannot use /dev/sdb1: Device or resource busy mdadm: Cannot use /dev/sdb1: It is busy mdadm: device /dev/sdb1 not suitable for any style of array

    Read the article

  • CVE-2014-0591 Buffer Errors vulnerability in Bind

    - by Ritwik Ghoshal
    CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2014-0591 Buffer Errors vulnerability 2.6 Bind Solaris 10 SPARC: 119783-28 X86: 119784-28 Solaris 11.1 11.1.16.5.0 Solaris 9 SPARC: 112837-30 X86: 114265-29 Please Note: The patches mentioned above will upgrade Bind to 9.6-ESV-R10-P2. This notification describes vulnerabilities fixed in third-party components that are included in Oracle's product distributions.Information about vulnerabilities affecting Oracle products can be found on Oracle Critical Patch Updates and Security Alerts page.

    Read the article

  • Merge replication stopping without errors in SQL 2008 R2

    - by Rob Farley
    A non-SQL MVP friend of mine, who also happens to be a client, asked me for some help again last week. I was planning on writing this up even before Rob Volk (@sql_r) listed his T-SQL Tuesday topic for this month. Earlier in the year, I (well, LobsterPot Solutions, although I’d been the person mostly involved) had helped out with a merge replication problem. The Merge Agent on the subscriber was just stopping every time, shortly after it started. With no errors anywhere – not in the Windows Event Log, the SQL Agent logs, not anywhere. We’d managed to get the system working again, but didn’t have a good reason about what had happened, and last week, the problem occurred again. I asked him about writing up the experience in a blog post, largely because of the red herrings that we encountered. It was an interesting experience for me, also because I didn’t end up touching my computer the whole time – just tapping on my phone via Twitter and Live Msgr. You see, the thing with replication is that a useful troubleshooting option is to reinitialise the thing. We’d done that last time, and it had started to work again – eventually. I say eventually, because the link being used between the sites is relatively slow, and it took a long while for the initialisation to finish. Meanwhile, we’d been doing some investigation into what the problem could be, and were suitably pleased when the problem disappeared. So I got a message saying that a replication problem had occurred again. Reinitialising wasn’t going to be an option this time either. In this scenario, the subscriber having the problem happened to be in a different domain to the publisher. The other subscribers (within the domain) were fine, just this one in a different domain had the problem. Part of the problem seemed to be a log file that wasn’t being backed up properly. They’d been trying to back up to a backup device that had a corruption, and the log file was growing. Turned out, this wasn’t related to the problem, but of course, any time you’re troubleshooting and you see something untoward, you wonder. Having got past that problem, my next thought was that perhaps there was a problem with the account being used. But the other subscribers were using the same account, without any problems. The client pointed out that that it was almost exactly six months since the last failure (later shown to be a complete red herring). It sounded like something might’ve expired. Checking through certificates and trusts showed no sign of anything, and besides, there wasn’t a problem running a command-prompt window using the account in question, from the subscriber box. ...except that when he ran the sqlcmd –E –S servername command I recommended, it failed with a Named Pipes error. I’ve seen problems with firewalls rejecting connections via Named Pipes but letting TCP/IP through, so I got him to look into SQL Configuration Manager to see what kind of connection was being preferred... Everything seemed fine. And strangely, he could connect via Management Studio. Turned out, he had a typo in the servername of the sqlcmd command. That particular red herring must’ve been reflected in his cheeks as he told me. During the time, I also pinged a friend of mine to find out who I should ask, and Ted Kruger (@onpnt) ‘s name came up. Ted (and thanks again, Ted – really) reconfirmed some of my thoughts around the idea of an account expiring, and also suggesting bumping up the logging to level 4 (2 is Verbose, 4 is undocumented ridiculousness). I’d just told the client to push the logging up to level 2, but the log file wasn’t appearing. Checking permissions showed that the user did have permission on the folder, but still no file was appearing. Then it was noticed that the user had been switched earlier as part of the troubleshooting, and switching it back to the real user caused the log file to appear. Still no errors. A lot more information being pushed out, but still no errors. Ted suggested making sure the FQDNs were okay from both ends, in case the servers were unable to talk to each other. DNS problems can lead to hassles which can stop replication from working. No luck there either – it was all working fine. Another server started to report a problem as well. These two boxes were both SQL 2008 R2 (SP1), while the others, still working, were SQL 2005. Around this time, the client tried an idea that I’d shown him a few years ago – using a Profiler trace to see what was being called on the servers. It turned out that the last call being made on the publisher was sp_MSenumschemachange. A quick interwebs search on that showed a problem that exists in SQL Server 2008 R2, when stored procedures have more than 4000 characters. Running that stored procedure (with the same parameters) manually on SQL 2005 listed three stored procedures, the first of which did indeed have more than 4000 characters. Still no error though, and the problem as listed at http://support.microsoft.com/kb/2539378 describes an error that should occur in the Event log. However, this problem is the type of thing that is fixed by a reinitialisation (because it doesn’t need to send the procedure change across as a transaction). And a look in the change history of the long stored procs (you all keep them, right?), showed that the problem from six months earlier could well have been down to this too. Applying SP2 (with sufficient paranoia about backups and how to get back out again if necessary) fixed the problem. The stored proc changes went through immediately after the service pack was applied, and it’s been running happily since. The funny thing is that I didn’t solve the problem. He had put the Profiler trace on the server, and had done the search that found a forum post pointing at this particular problem. I’d asked Ted too, and although he’d given some useful information, nothing that he’d come up with had actually been the solution either. Sometimes, asking for help is the most useful thing you can do. Often though, you don’t end up getting the help from the person you asked – the sounding board is actually what you need. @rob_farley

    Read the article

  • Checksum Errors From Hard Disk

    - by Ademos
    After running GSmartControl, I received three checksum errors on my storage hard disk. Error in Attribute Data structure: checksum error Error in Attribute Thresholds structure: checksum error Error in ATA Error Log structure: checksum error Does this indicate a hard disk failure? Because, this is the THIRD TIME I have replaced the same hard disk. (after seeing this error) The hard disk is a Western Digital Caviar Green. (2 TB)

    Read the article

  • Package dependency errors : libc

    - by piyush
    I was trying to install kde-full when the libc had some unmet dependencies error. When saying sudo apt-get install kde-full the terminal has this in the end libc6 : Depends: libc-bin (= 2.15-0ubuntu10) libc6:i386 : Depends: libc-bin:i386 (= 2.15-0ubuntu10) libc6-dev : Depends: libc6 (= 2.15-0ubuntu10.3) but 2.15-0ubuntu10 is to be installed libc6-i386 : Depends: libc6 (= 2.15-0ubuntu10.3) but 2.15-0ubuntu10 is to be installed When running sudo apt-get -f install, this shows up at the end De-configuring libc6:i386 ... A copy of the C library was found in an unexpected directory: '/lib/x86_64-linux-gnu/libc-2.15.so' It is not safe to upgrade the C library in this situation; please remove that copy of the C library or get it out of '/lib/x86_64-linux-gnu' and try again. dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Preparing to replace libc6:i386 2.15-0ubuntu10 (using .../libc6_2.15-0ubuntu10.3_i386.deb) ... De-configuring libc6 ... A copy of the C library was found in an unexpected directory: '/lib/i386-linux-gnu/ld-2.15.so' It is not safe to upgrade the C library in this situation; please remove that copy of the C library or get it out of '/lib/i386-linux-gnu' and try again. dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Any suggestions how to fix this. I don't desire to have kde-full anymore; only that other installations should work. I've done sudo apt-get update several times, so those suggestions can be kept away UPD : here is output of dpkg configure ~$ sudo dpkg --configure -a dpkg: dependency problems prevent configuration of libc6-dev: libc6-dev depends on libc6 (= 2.15-0ubuntu10.3); however: Version of libc6 on system is 2.15-0ubuntu10. dpkg: error processing libc6-dev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-i386: libc6-i386 depends on libc6 (= 2.15-0ubuntu10.3); however: Version of libc6 on system is 2.15-0ubuntu10. dpkg: error processing libc6-i386 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: libc6-dev libc6-i386 ~$

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >