Search Results

Search found 466 results on 19 pages for 'fans'.

Page 4/19 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Motherboard or Processor Problem

    - by bradlis7
    My computer is broken, but I'm having trouble narrowing down the issue. I replaced the power supply, because I assumed that was the issue, but it has the same problem. The issue started with my computer starting the fans and running, but it didn't get to the BIOS screen for about 10 seconds. Now it refuses to do anything when the power button is pressed, except when I turn off the machine and take the processor out for 10-20 seconds, then put it back in, I came hit the power button immediately, and the fans start for 1/2 second, and quit. Does this sound like a is a processor or motherboard issue? I removed all components, so I know that the issue is with one of these two things.

    Read the article

  • Why won't my computer turn off?

    - by kinglime
    I have recently replaced my old Corsair TX650M PSU with a new CoolerMaster Silent Pro Gold 800w PSU. With the old PSU when I turned off my computer from windows it would shut down and everything would turn off. The lights would turn off and the fans would stop turning. With my new power supply when I shut down windows It shows the usual shutting down dialog then my two monitors say "no signal" and turn off. The weird part however is that the lights stay on and the fans continue spinning forever until I manually hold the power button in for 4 seconds then finally everything shuts off. How can I emulate the previous behavior?

    Read the article

  • Guest Post: Christian Finn: Is Facebook About to Become a Victim of its Own Success?

    - by Michael Snow
    12.00 Print 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Cambria; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;}  Since we have a number of new members of the WebCenter Evangelist team - I thought it would be appropriate to close the week with the newest hire and leader of the global WebCenter Evangelists, Christian Finn, who has just joined the Red team after many years with the small technology company up in Redmond, WA. He gave an intro to himself in an earlier post this morning but his post below is a great example of how customer engagement takes on a life of its own in our global online connected and social digital ecosystem. Is Facebook About to Become a Victim of its Own Success? What if I told you that your brand could advertise so successfully, you wouldn’t have to pay for the ads? A recent campaign by Ford Motor Company for the Ford Focus featuring Doug the spokespuppet (I am not making this up) did just that—and it raises some interesting issues for marketers and social media alike in the brave new world of customer engagement that is the Social Web. Allow me to elaborate. An article in the Wall Street Journal last week—“Big Brands Like Facebook, But They Don’t Like to Pay” tells the story of Ford’s recently concluded online campaign for the 2012 Ford Focus. (Ford, by the way, under the leadership of people such as Scott Monty, has been a pioneer of effective social campaigns.) The centerpiece of the campaign was the aforementioned Doug, who appeared as a character on Facebook in videos and via chat. (If you are not familiar with Doug, you can see him in action here, and read the WSJ story here.) You may be thinking puppet ads are a sign of Internet Bubble 2.0 and want to stop now, but bear with me. The Journal reported that Ford spent about $95M on its overall Ford Focus campaign, with TV accounting for over $60M of that spend. The Internet buy for the campaign was just over $10M, which included ad buys to drive traffic to Facebook for people to meet and ‘Like’ Doug and some amount on Facebook ads, too, to promote Doug and by extension, the Ford Focus. So far, a fairly straightforward consumer marketing story in the Internet Era. Yet here’s the curious thing: once Doug reached 10,000 fans on Facebook, Ford stopped paying for Facebook ads. Doug had gone viral with people sharing his videos with one another; once critical mass was reached there was no need to buy more ads on Facebook. Doug went on to be Liked by over 43,000 people, and 61% of his fans said they would be more likely to consider buying a Focus. According to the article, Ford says Focus sales are up this year—and increasing sales is every marketer’s goal. And so in effect, Ford found its Facebook campaign so successful that it could stop paying for it, instead letting its target consumers communicate its messages for fun—and for free. Not only did they get a 3X increase in fans beyond their paid campaign, they had thousands of customers sharing their messages in video form for months. Since free advertising is the Holy Grail of marketing both old and new-- and it appears social networks have an advantage in generating that buzz—it seems reasonable to ask: what would happen to brands’ advertising strategies—and the media they use to engage customers, if this success were repeated at scale? It seems logical to conclude that, at least initially, more ad dollars would be spent with social networks like Facebook as brands attempt to replicate Ford’s success. Certainly Facebook ad revenues are on the rise—eMarketer expects Facebook’s ad revenues to quintuple by 2012 compared with 2009 levels, to nearly 2.9B. That’s bad news for TV and the already battered print media and good news for Facebook. But perhaps not so over the longer run. With TV buys, you have to keep paying to generate impressions. If Doug the spokespuppet is any guide, however, that may not be true for social media campaigns. After an initial outlay, if a social campaign takes off, the audience will generate more impressions on its own. Thus a social medium like Facebook could be the victim of its own success when it comes to ad revenue. It may be there is an inherent limiting factor in the ad spend they can capture, as exemplified by Ford’s experience with Dough and the Focus. And brands may spend much less overall on advertising, with as good or better results, than they ever have in the past. How will these trends evolve? Can brands create social campaigns that repeat Ford’s formula for the Focus with effective results? Can social networks find ways to capture more spend and overcome their potential tendency to make further spend unnecessary? And will consumers become tired and insulated from social campaigns, much as they have to traditional advertising channels? These are the questions CMOs and Facebook execs alike will be asking themselves in the brave new world of customer engagement. As always, your thoughts and comments are most welcome.

    Read the article

  • How to Tell If Your Computer is Overheating and What to Do About It

    - by Chris Hoffman
    Heat is a computer’s enemy. Computers are designed with heat dispersion and ventilation in mind so they don’t overheat. If too much heat builds up, your computer may become unstable or suddenly shut down. The CPU and graphics card produce much more heat when running demanding applications. If there’s a problem with your computer’s cooling system, an excess of heat could even physically damage its components. Is Your Computer Overheating? When using a typical computer in a typical way, you shouldn’t have to worry about overheating at all. However, if you’re encountering system instability issues like abrupt shut downs, blue screens, and freezes — especially while doing something demanding like playing PC games or encoding video — your computer may be overheating. This can happen for several reasons. Your computer’s case may be full of dust, a fan may have failed, something may be blocking your computer’s vents, or you may have a compact laptop that was never designed to run at maximum performance for hours on end. Monitoring Your Computer’s Temperature First, bear in mind that different CPUs and GPUs (graphics cards) have different optimal temperature ranges. Before getting too worried about a temperature, be sure to check your computer’s documentation — or its CPU or graphics card specifications — and ensure you know the temperature ranges your hardware can handle. You can monitor your computer’s temperatures in a variety of different ways. First, you may have a way to monitor temperature that is already built into your system. You can often view temperature values in your computer’s BIOS or UEFI settings screen. This allows you to quickly see your computer’s temperature if Windows freezes or blue screens on you — just boot the computer, enter the BIOS or UEFI screen, and check the temperatures displayed there. Note that not all BIOSes or UEFI screens will display this information, but it is very common. There are also programs that will display your computer’s temperature. Such programs just read the sensors inside your computer and show you the temperature value they report, so there are a wide variety of tools you can use for this, from the simple Speccy system information utility to an advanced tool like SpeedFan. HWMonitor also offer this feature, displaying a wide variety of sensor information. Be sure to look at your CPU and graphics card temperatures. You can also find other temperatures, such as the temperature of your hard drive, but these components will generally only overheat if it becomes extremely hot in the computer’s case. They shouldn’t generate too much heat on their own. If you think your computer may be overheating, don’t just glance as these sensors once and ignore them. Do something demanding with your computer, such as running a CPU burn-in test with Prime 95, playing a PC game, or running a graphical benchmark. Monitor the computer’s temperature while you do this, even checking a few hours later — does any component overheat after you push it hard for a while? Preventing Your Computer From Overheating If your computer is overheating, here are some things you can do about it: Dust Out Your Computer’s Case: Dust accumulates in desktop PC cases and even laptops over time, clogging fans and blocking air flow. This dust can cause ventilation problems, trapping heat and preventing your PC from cooling itself properly. Be sure to clean your computer’s case occasionally to prevent dust build-up. Unfortunately, it’s often more difficult to dust out overheating laptops. Ensure Proper Ventilation: Put the computer in a location where it can properly ventilate itself. If it’s a desktop, don’t push the case up against a wall so that the computer’s vents become blocked or leave it near a radiator or heating vent. If it’s a laptop, be careful to not block its air vents, particularly when doing something demanding. For example, putting a laptop down on a mattress, allowing it to sink in, and leaving it there can lead to overheating — especially if the laptop is doing something demanding and generating heat it can’t get rid of. Check if Fans Are Running: If you’re not sure why your computer started overheating, open its case and check that all the fans are running. It’s possible that a CPU, graphics card, or case fan failed or became unplugged, reducing air flow. Tune Up Heat Sinks: If your CPU is overheating, its heat sink may not be seated correctly or its thermal paste may be old. You may need to remove the heat sink and re-apply new thermal paste before reseating the heat sink properly. This tip applies more to tweakers, overclockers, and people who build their own PCs, especially if they may have made a mistake when originally applying the thermal paste. This is often much more difficult when it comes to laptops, which generally aren’t designed to be user-serviceable. That can lead to trouble if the laptop becomes filled with dust and needs to be cleaned out, especially if the laptop was never designed to be opened by users at all. Consult our guide to diagnosing and fixing an overheating laptop for help with cooling down a hot laptop. Overheating is a definite danger when overclocking your CPU or graphics card. Overclocking will cause your components to run hotter, and the additional heat will cause problems unless you can properly cool your components. If you’ve overclocked your hardware and it has started to overheat — well, throttle back the overclock! Image Credit: Vinni Malek on Flickr     

    Read the article

  • 4 Ways Your Brand Can Jump From the Edge of Space

    - by Mike Stiles
    Can your brand’s social media content captivate the world and make it hold its collective breath? Can you put something on the screen that’s so compelling that your audience can’t look away? Will they want to make sure their friends see it so they can talk about it? If not, you’re probably not with Red Bull. I was impressed with Red Bull’s approach to social content even before Felix Baumgartner’s stunning skydive from the edge of space. And then they did this. According to Visible Measures, videos of the jump scored 50 million views in 4 days. 1,700 clips were generated from both official and organic sources. The live stream was the most watched YouTube Stream of all time (8 million concurrent viewers). The 2nd most watched live stream was…Felix’ first attempt Oct. 9. Are you ready to compete with that? I ask that question because some brands are still out there tying themselves up in knots about whether or not they should tweet. The public’s time and attention are scarce commodities, commodities they value greatly. The competition amongst brands for that time and attention is intense and going up like Felix’s capsule. If you still view your press releases as “content,” you won’t even be counted as being among the competition. Here are 5 lessons learned from Red Bull’s big leap: 1. They have a total understanding of their target market and audience. Not only do they have an understanding of it, they do something about it. They act on it. They fill the majority of their thoughts with what the audience wants. They hunger for wild applause from that audience. They want to do things that embrace the audience’s lifestyle and immerse in it so the target will identify the brand as “one of them.” Takeaway: BE your target market. 2. They deliver content that strikes the audience right where they emotionally live. If you want your content to have impact, you have to make your audience’s heart race, or make them tear up, or make them laugh. Label them “data points” all you want, but humans are emotional creatures. No message connects that’s not carried in on an emotion. Takeaway: You’re on the inside. If your content doesn’t make you say “wow,” it’s unlikely it will register with fans. 3. They put aside old school marketing and don’t let their content be degraded into a commercial. Their execs seem to understand the value in keeping a lid on the hard sell. So many brands just can’t bring themselves to disconnect advertising and social content. The result is, otherwise decent content gets contaminated with a desperation the viewer can smell a mile away. Think the Baumgartner skydive didn’t do Red Bull any good since he wasn’t drinking one on the way down while singing a jingle? Analysis company Taykey discovered that at the peak of the skydive buzz, about 1% of all online conversation was about the jump. Mentions of Red Bull constituted 1/3 of 1% of all Internet activity. Views of other Red Bull videos also shot up. Takeaway: Chill out with the ads. Your brand will get full credit for entertaining/informing fans in a relevant way, provided you do it. 4. They don’t hesitate to ask, “What can we do next”? Most corporate cultures are a virtual training facility for “we can’t do that.” Few are encouraged to innovate or think big, if think at all. Thinking big involves faith, and work. It means freedom and letting employees run a little wild with their ideas. There will always be the opportunity to let fear of everything that moves creep in and kill grand visions dead in their tracks. Experimenting must be allowed. Failure must be allowed. Red Bull didn’t think big. They thought mega. They tried to outdo themselves. Felix could have gone ahead and jumped halfway up, thinking, “This is still relatively high up. Good enough.” But that wouldn’t have left us breathless. Takeaway: Go for it. Jump. In putting up social properties and gathering fans of your brand, you’ve basically invited people to a party. A good host doesn’t just set out warm beer and stale chips because that’s inexpensive and easy. Be on the lookout for ways to make your guests walk away saying, “That was epic.”

    Read the article

  • LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

    - by Andy Shinn
    I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

    Read the article

  • Way to Remove Invite Limit on FBML Multi-Friend Selector

    - by David
    Hi there, I tried to look through various resources before posting here, but was having a surprisingly difficult time finding an answer to my question. Sorry in advance if I overlooked it. I'm currently trying to add the FBML Multi-Friend Selector to my Facebook page. It has a limit on the number of friends you can invite at a time ("Add up to 20 of your friends by clicking on their pictures below"). From what I've looked through it sounds like 20 is the max number of friends a user can invite, but then looking at Mint's page, they have a 22 max invite (http://www.facebook.com/mint?ref=ts) I thought it might be based on number of page fans, as Mint has 56,000, but that doesn't seem to be the case as this page only has 256 fans and have a max of 26 friend invites (http://www.facebook.com/tivix?v=app_106437999388442). Therefore, I don't really understand how this system works. Is there a way for me to increase to 26? Unlimited? Thanks for your help!

    Read the article

  • Bad temperature sensors on Foxconn motherboard?

    - by Gawain
    I have a system with a Foxconn V400 series motherboard and AMD Athlon 3000+ processor. Ever since I got it a few years ago the fans (particularly the CPU fan) have been really loud. So recently I installed SpeedFan to see why they were running so fast. SpeedFan reported the CPU temperature to be 32C, and one motherboard sensor at about 26C. But the other two motherboard sensors were reporting 78C and 64C respectively. Naturally the fans were both maxed out because of this, with the CPU fan at 5800rpm and the case fan at 2400rpm. I opened the case and everything inside was literally cool to the touch, with the exception of the CPU heatsink which was slightly warm, but nowhere near 78C. It seems like the temperature sensors are either defective or being read incorrectly. Is there some way I can decrease my fan noise without risking damage to my processor? Some way to ignore those two temp sensors? Any help would be greatly appreciated.

    Read the article

  • Why is image_hash empty for some ad_creatives? Is it because it is expired?

    - by Chris Conner
    I ran _"https://graph.facebook.com/act_47121778/adcreatives?access_token=_ and got the following results. Why are some creatives returning empty image hash? { "view_tag": "", "alt_view_tags": [ ], "creative_id": "6002716206572", "type": 1, "title": "Grow your fans!", "body": "Fan Page Owners! Grow your fanbase. Create quizzes for your page. Win $100 Weekly. Make money with our revenue share program.", "image_hash": "6ac30e43f21c8580361de92d3288ed68", "link_url": "http://www.facebook.com/quizwriter?sk=app_81434956828", "name": "Grow your fans!", "run_status": 1, "preview_url": "http://www.facebook.com/ads/api/creative_preview.php?cid=6002716206572", "count_current_adgroups": 1, "id": "6002716206572", "image_url": "http://creative.ak.fbcdn.net/v41818/flyers/109/44/1296329249810543669_1_31eb15ed.jpg" }, { "view_tag": "", "alt_view_tags": [ ], "creative_id": "6002444043572", "type": 1, "title": "Tennis Champs Social Game", "body": "Tennis Champ! Start with 5,000 dollars , beat out other players with your mad tennis skills and become the tennis champ! Socialize!", "image_hash": "", "link_url": "334886511760", "name": "Tennis Champs Social Game", "run_status": 1, "preview_url": "http://www.facebook.com/ads/api/creative_preview.php?cid=6002444043572", "count_current_adgroups": 2, "id": "6002444043572" },

    Read the article

  • Accessing two sides of a user-user relationship in rails

    - by Lowgain
    Basically, I have a users model in my rails app, and a fanship model, to facilitate the ability for users to become 'fans' of each other. In my user model, I have: has_many :fanships has_many :fanofs, :through => :fanships In my fanship model, I have: belongs_to :user belongs_to :fanof, :class_name => "User", :foreign_key => "fanof_id" My fanship table basically consists of :id, :user_id and :fanof_id. This all works fine, and I can see what users a specific user is a fan of like: <% @user.fanofs.each do |fan| %> #things <% end %> My question is, how can I get a list of the users that are a fan of this specific user? I'd like it if I could just have something like @user.fans, but if that isn't possible what is the most efficient way of going about this? Thanks!

    Read the article

  • What are the advantages of Ceylon over Java?

    - by Anuj Balan
    Looking for the recent and powerful upcoming programming languages over net, I came across Ceylon. I dropped in at ceylon-lang.org and it says: Ceylon is deeply influenced by Java. You see, we're fans of Java, but we know its limitations inside out. Ceylon keeps the best bits of Java but improves things that in our experience are annoying, tedious, frustrating, difficult to understand, or bugprone. What are the advantages of Ceylon over Java?

    Read the article

  • Fan not working on thinkpad L430, laptop overheating

    - by Dirk B.
    I'm having problems controlling the fan of my Lenovo Thinkpad L430. The fan doesn't start. Without any fan control installed the fan just doesn't run. If I run stress, it does run a little, but it's nowhere near the speed it should be. After a while, the laptop just overheats and stops. I Tried to install tp-fancontrol, and enabled thinkpad_acpi fancontrol=1, but to no avail. If I try to set the fan speed manually, it doesn't start up. In windows, there's a program called TPFanControl. It turns out that this laptop uses a different scheme to control the fan than other thinkpads. The level runs from 0 to 255, and max = 0 and min=255. Now I'm looking for a fan control program that works for linux. Does anyone know if it actually exists? Anyone with any experience on fan control on a L430? Update: sudo pwmconfig gives the following output: # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. Found the following devices: hwmon0 is acpitz hwmon1/device is coretemp hwmon2/device is thinkpad Found the following PWM controls: hwmon2/device/pwm1 hwmon2/device/pwm1 is currently setup for automatic speed control. In general, automatic mode is preferred over manual mode, as it is more efficient and it reacts faster. Are you sure that you want to setup this output for manual control? (n) y Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 0 ... skipping! There are no working fan sensors, all readings are 0. Make sure you have a 3-wire fan connected. You may also need to increase the fan divisors. See doc/fan-divisors for more information. regards, Dirk

    Read the article

  • Lenovo Thinkpad L430 overheating due to fan problems

    - by Dirk B.
    This is the same question as Fan not working on thinkpad L430, laptop overheating, but that question has been marked as a duplicate, which it is not, and I cannot reopen it. I'm having problems controlling the fan of my Lenovo Thinkpad L430. The fan doesn't start. Without any fan control installed the fan just doesn't run. If I run stress, it does run a little, but it's nowhere near the speed it should be. After a while, the laptop just overheats and stops. I Tried to install tp-fancontrol, and enabled thinkpad_acpi fancontrol=1, but to no avail. If I try to set the fan speed manually, it doesn't start up. In windows, there's a program called TPFanControl. It turns out that this laptop uses a different scheme to control the fan than other thinkpads. The level runs from 0 to 255, and max = 0 and min=255. Now I'm looking for a fan control program that works for linux. Does anyone know if it actually exists? Anyone with any experience on fan control on a L430? Update: sudo pwmconfig gives the following output: # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. Found the following devices: hwmon0 is acpitz hwmon1/device is coretemp hwmon2/device is thinkpad Found the following PWM controls: hwmon2/device/pwm1 hwmon2/device/pwm1 is currently setup for automatic speed control. In general, automatic mode is preferred over manual mode, as it is more efficient and it reacts faster. Are you sure that you want to setup this output for manual control? (n) y Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 0 ... skipping! There are no working fan sensors, all readings are 0. Make sure you have a 3-wire fan connected. You may also need to increase the fan divisors. See doc/fan-divisors for more information. update: If you need it, lspci is available here

    Read the article

  • Finalists for the Microsoft Accelerator for Windows Azure

    - by ScottGu
    Today, I am pleased to announce the ten finalists for the Microsoft Accelerator for Windows Azure powered by TechStars. These startups are about to launch into a three-month program where they will develop new products and businesses using Windows Azure. The response to the program has been fantastic - we received nearly 600 applications from entrepreneurs in 69 countries around the world, spanning a host of industries including retail, travel, entertainment, banking, real estate and more.  There were so many innovative ideas and amazing teams that it really made the selection process hard.  We finally landed on 10 finalists, based on their experience, qualifications, and innovative business ideas built on the cloud. This fall’s Windows Azure class includes: Advertory – Berlin, Germany. Advertory helps local businesses increase revenue and build customer loyalty. Appetas – Seattle, WA. Appetas' mission is to make restaurants look as beautiful online as they do on the plate! BagsUp – Sydney, Australia. Find great places from people you trust. Embarke – San Diego, CA. Embarke allows developers and companies the ability to integrate with any human communication channel (Facebook, Email, Text Message, Twitter) without having to learn the specifics, write code, or spend time on any of them. Fanzo – Seattle, WA. Fanzo puts sports fans in the spotlight. Find other fans, show off your fanswagger and get rewarded for your passion. MetricsHub – Bellevue, WA. A service providing cloud monitoring with incident detection and prebuilt workflows for remedying common problems. Mobilligy – Bellevue, WA. Mobilligy revolutionizes how people pay their bills by bringing convenient, secure, and instant bill payment support to mobile devices. Realty Mogul – Los Angeles, CA. Realty Mogul is a crowdfunding platform for real estate where accredited investors pool capital and invest in properties that are acquired, managed and eventually resold by professional private real estate companies and their management teams. Staq – San Francisco, CA. Back-end as a service for APIs. Socedo – Bellevue, WA. A simple and effective web application for lead generation and relationship management on Twitter. Each startup will be hosted in Seattle and mentored by entrepreneurs and venture capitalists as well as leaders from Windows Azure and other Microsoft organizations. The teams will spend the first month ideating and refining their business concepts with input and advice from their mentors as well as Microsoft customers, followed by two months of design and development. They will present their results to investors and Microsoft partners at an event in mid-January. We are really looking forward to seeing how their businesses evolve.  These teams have demonstrated incredible energy, passion, and innovative capabilities – and they are ready to show the world what’s possible with Windows Azure. Thanks, Scott P.S. And if you are new to Twitter you can also optionally follow me: @scottgu

    Read the article

  • Oracle Partner Deutschland @ Facebook: Gewinner des iPad2

    - by A&C Redaktion
    Auf dem OPN Day Satellite in Frankfurt haben wir unter allen Fans des Facebook-Profils von Oracle Alliances & Channel Deutschland ein iPad 2 verlost: Wer bis zum 8. November 2011, 16 Uhr den "Gefällt mir"-Button angeklickt hatte, nahm an unserer Verlsung teil. Und..... der glückliche Gewinner ist: Markus Meyer vom Oracle Partner Tonbeller AG!Wir gratulieren ganz herzlich und wünschen viel Freude mit dem neuen iPad!!!!

    Read the article

  • How do I get fan control working?

    - by RobinJ
    I know there something called fancontrol, that enables you to control the speed of your system's ventilation. I'd like to let my fans spin a bit faster as my laptop is heating up very easilly. All tutorials and stuff I've found are for old versions of Ubuntu and don't seem to be working anymore. Can anyone explain to me or give me a good link on how I can get it working on Ubuntu? Something different with the same effect is also fine.

    Read the article

  • Ubuntu 12.04 Overheating HP Pavillion dm4 3011tx

    - by gevvek
    I have tried installing Ubuntu 12.04 on my HP Pavilion dm4 3011tx and after a few minutes the fans start to work very fast and my laptop starts to heat up; The CPU temperature got up to 70 degrees and was still rising before I turned the computer off. I installed the graphics drivers for my AMD Raedon graphics and tried switching to the integrated graphics but that didn't make a difference I have also tried Fedora and Linux Mint and they do the same thing. Can anyone help?

    Read the article

  • Xorg constant high cpu usage

    - by user157342
    CPU AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ Kernel 2.6.38-7.dmz.1-liquorix-amd64 X server version: X.Org X Server 1.9.0 OpenGL direct rendering: Yes OpenGL vendor: NVIDIA Corporation OpenGL renderer: GeForce 8400 GS/PCI/SSE2 OpenGL version: 3.3.0 NVIDIA 270.41.06 GCC version: 4.4.5 Java version: 1.6.0_20 Python version: 2.6.6 GTK version: 2.22.0 PyGTK version: 2.21.0 Firefox version: Mozilla Firefox 5.0 Ubuntu version: 10.10 GNOME version: 2.32.0 The issue is, the Xorg process always seems to be active with over 6% CPU and +50MB RAM usage, which in turn keeps the fans blowing all the time.

    Read the article

  • Microsoft Promises Plenty of Surprises for E3 2010, with Project Natal Headlining the Show

    With the E3 Expo 2 1 just around the corner there is plenty of buzz circling around what Microsoft will bring to the table. This tech-driven three-day event takes place this year on June 15 16 and 17 at the Los Angeles Convention Center. Fans of Microsoft as well as their competitors will likely be waiting with anticipation as to what Microsoft plans to introduce to the world.... Microsoft BPOS - $10 Per User Per Month* *Includes a 12-month subscription. Minimum 5 seats required.

    Read the article

  • Ubuntu 10.10 Alpha 1 Is Ready for Testing

    <b>Softpedia:</b> "While Ubuntu fans out there still discover and enjoy the brand-new Ubuntu 10.04 LTS (Lucid Lynx) operating system, somewhere deep in the Ubuntu headquarters, the Canonical developers are working on the next major update for their popular Linux distribution."

    Read the article

  • Linux Mint 17 disponible en version finale avec les bureaux Cinnamon et Mate, Qiana sera supporté jusqu'en 2019

    Linux Mint 17 disponible en version finale avec les bureaux Cinnamon et Mate Qiana sera supporté jusqu'en 2019 La célèbre distribution Linux Mint 17 est disponible en version finale, quelques jours seulement après la publication de la release candidate.Téléchargeable sous deux saveurs différentes (Cinnamon et Mate), cette version apporte un nombre important de nouvelles fonctionnalités, d'optimisation des performances et d'améliorations qui ne pourront que séduire les fans du système d'exploitation...

    Read the article

  • WWDC : Apple dévoile iOS 8 avec son SDK qui introduit plus de 4 000 nouvelles API, la version bêta disponible pour les développeurs

    WWDC : Apple dévoile iOS 8 avec son SDK qui introduit plus de 4 000 nouvelles API la version bêta disponible pour les développeursLe WWDC bat son plein. Apple a présenté lors de son événement dédié aux développeurs la prochaine version majeure de son système d'exploitation pour mobile iOS.iOS 8 introduit un nombre important de nouvelles fonctionnalités et améliorations pour séduire encore plus les fans des iDevices qui reposent sous le système d'exploitation.Son centre de notifications a été revu...

    Read the article

  • Htpc aka "Media Center": cheap and *silent*?

    - by Unknown
    It may be me, or the place I live (Italy), but it seems pretty hard to get a build or a prebuilt nettop or a laptop that fits the need. I need something silent able to playback all h.264 fullhd content without stuttering, and well (and not loosing the hw acceleration because of softsubs...) silent not ugly silent and (possibly) cheap. I'm going the linux route, therefore i'm moving towards a cpu-based or nvida-integrated solution (i don't think ati hw accelerated playback - or the intel "hd" acceleration - is useable yet). Ion nettop; it's either the Acer Revo (but here it's incredibly pricey and it's hard to find the dualcore version) or the Asrock Ion 330, that in the current version is rated "silent" at 26Db. 26. Sounds pretty noisy to me!!! the previous version was even worse. was this product really aimed at htpc market?? the Dell Zino - i think it's ATI based unfortunately. Laptop: correct me if I'm wrong: sub 600€/$ units are quite loud under full load (because of the tiny fans). ULW laptops are indeed quite similar: tiniest fans = high pitched noise and the cpu still lacks power for non hd-accelerated video decoding Handmade build: little money can be saved with underpowered cpus, a low-midrange cpu would help in the case of non-hw-accelerated content the cases are quite pricey the PSU one has to get ranges between 100/150 €/$ minimum to keep the noise down a low-mid build, all included, sums up to over 650 €/$ for a still-looking-ugly-unit, without the blu-ray drive. Please help. What do you advise on this? ;) Am I ignoring laptops too much, maybe? Are low-priced Acers that noisy/high pitched under full load?

    Read the article

  • SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

    - by Dan
    I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >