Search Results

Search found 25196 results on 1008 pages for 'hard drive cache'.

Page 4/1008 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Laptop stopped recognizing USB hard drive

  - by vahokif

  Hi, My Packard Bell EasyNote TX86 laptop stopped recognizing my 1 TB Toshiba Store Art hard drive. It worked fine until now, and it still works on other computers. Other USB devices (including storage) work, and I've tried plugging it in every port, to no avail. When I plug it in it spins up, but Windows doesn't react at all (it's not in disk management), Linux doesn't write anything in dmesg and I can't see it in BIOS setup. I didn't use it at all today, apart from plugging it into a freshly-installed Windows 7 machine once (where it worked). What can I do? Which device is to blame here? EDIT: One more thing. I unplugged the drive while the laptop was hibernated. Google says this might be the problem and it might have something to do with resetting the USB Host Controller.

  Read the article

• Are flash drives and hard drives thought of as "an ocean of bytes"?

  - by Jian Lin

  Why can a USB Flash drive be formatted as NTFS or FAT32? Is the USB Flash Drive and Hard Drive just to be thought of as "an ocean of bytes"? I get very used to hearing formatting a hard drive as FAT32 or NTFS, but we can also format a USB Flash drive as NTFS or FAT32? Is it because a hard drive or Flash drive both can be thought of as "an ocean of bits" or "an ocean of bytes"? I remember RAM as: it takes 16 bit or 32 bit as an address signal (the 16 or 32 copper footing on the circuit board), and give out 8 bit of data (the other 8 copper footing on the circuit board). So can a hard drive be thought of as working that way too? So that's why a Flash drive can be the same too? Just an "ocean of bytes". But is it true that hard drive's hardware make it an ocean of sector or something else, that is, the smaller unit of read / write is not byte but something else? So with this "ocean of bytes", NTFS has the format that says, "if the first byte is __, then it means __ (it is a file or folder, and link to which sector, indicated by byte 2 and 3, etc, etc)"

  Read the article

• Clicks or ticks every minute when HDD is idle [closed]

  - by Ramy

  Possible Duplicate: Clicks or ticks every minute when HDD is idle My HDD is a My passport... It's 2 weeks old. I hear this tick or click followed by another one about 8-9 secs later, and they repeat every minute almost exactly... They usually happen and the LED light blinking.. It's not like the other clicks you hear that indicate any inevitable HDD failure, it's much lower in volume. I don't know what that is, however it's different than the rest of the HDD usual sounds...It's close to the sound of the mouse click. It sometimes also happens when I access a file on the drive mostly after being idle for a while, sometimes randomly not really sure... The drive though is working well, the SMART report comes out OK and without warning, and disk management shows it healthy... What could be the cause of this??

  Read the article

• Corrupted file, hard drive test?

  - by all-R

  Hi guys, I'm currently on a macbook with a 1TB external hard drive connected trough a USB hub wich is connected on my macbook. The problem is, my disk, wich is partitioned in 2 (one HFS+ and one NTFS) keeps getting corrupted, recently it was my HFS+ partition, I could not repair it using the Apple's Disk utility, but was able to backup my files. Is it synonym that my hard drive is failing? Is it because of my USB hub? I also keep all my iTunes library on my external HD (HFS+ partition), and did a lot of transfer lately, adding files, removing etc. the last time, my partition got corrupted after a lot of deleted items. If anybody has an idea of what to check first, what could cause the problem, I would appreciate it :) Thanks!

  Read the article

• Accessing second hard drive

  - by Jonathan

  Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

  Read the article

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

• Application throws NotSerializableException when run on an jboss cluster

  - by Kalpana

  Environment: JBoss 5.1.0, JBoss Seam 2.2.0 While trying to get my application running in a clustered environment after login I am getting the following exception. Post login we try to store the currentUser in jboss seam session context. java.io.NotSerializableException: org.jboss.seam.util.AnnotatedBeanProperty How to resolve this? java.io.NotSerializableException: org.jboss.seam.util.AnnotatedBeanProperty at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1156) at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java :1509) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 74) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java :1509) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 74) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326) at java.util.ArrayList.writeObject(ArrayList.java:570) at sun.reflect.GeneratedMethodAccessor339.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:94 5) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 61) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java :1509) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 74) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326) at java.util.HashMap.writeObject(HashMap.java:1001) at sun.reflect.GeneratedMethodAccessor338.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:94 5) at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:14 61) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1392) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326) at org.jboss.ha.framework.server.SimpleCachableMarshalledValue.serialize (SimpleCachableMarshalledValue.java:271) at org.jboss.ha.framework.server.SimpleCachableMarshalledValue.writeExte rnal(SimpleCachableMarshalledValue.java:252) at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java: 1421) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.jav a:1390) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326) at org.jboss.cache.marshall.CacheMarshaller200.marshallObject(CacheMarsh aller200.java:460) at org.jboss.cache.marshall.CacheMarshaller300.marshallObject(CacheMarsh aller300.java:47) at org.jboss.cache.marshall.CacheMarshaller200.marshallMap(CacheMarshall er200.java:569) at org.jboss.cache.marshall.CacheMarshaller200.marshallObject(CacheMarsh aller200.java:370) at org.jboss.cache.marshall.CacheMarshaller300.marshallObject(CacheMarsh aller300.java:47) at org.jboss.cache.marshall.CacheMarshaller200.marshallCommand(CacheMars haller200.java:519) at org.jboss.cache.marshall.CacheMarshaller200.marshallObject(CacheMarsh aller200.java:314) at org.jboss.cache.marshall.CacheMarshaller300.marshallObject(CacheMarsh aller300.java:47) at org.jboss.cache.marshall.CacheMarshaller200.marshallCommand(CacheMars haller200.java:519) at org.jboss.cache.marshall.CacheMarshaller200.marshallObject(CacheMarsh aller200.java:314) at org.jboss.cache.marshall.CacheMarshaller300.marshallObject(CacheMarsh aller300.java:47) at org.jboss.cache.marshall.CacheMarshaller200.objectToObjectStream(Cach eMarshaller200.java:191) at org.jboss.cache.marshall.CacheMarshaller200.objectToObjectStream(Cach eMarshaller200.java:136) at org.jboss.cache.marshall.VersionAwareMarshaller.objectToBuffer(Versio nAwareMarshaller.java:182) at org.jboss.cache.marshall.VersionAwareMarshaller.objectToBuffer(Versio nAwareMarshaller.java:52) at org.jboss.cache.marshall.CommandAwareRpcDispatcher$ReplicationTask.ca ll(CommandAwareRpcDispatcher.java:369) at org.jboss.cache.marshall.CommandAwareRpcDispatcher$ReplicationTask.ca ll(CommandAwareRpcDispatcher.java:341) at org.jboss.cache.util.concurrent.WithinThreadExecutor.submit(WithinThr eadExecutor.java:82) at org.jboss.cache.marshall.CommandAwareRpcDispatcher.invokeRemoteComman ds(CommandAwareRpcDispatcher.java:206) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 748) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 716) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 721) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:161) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:135) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:107) at org.jboss.cache.interceptors.ReplicationInterceptor.handleCrudMethod( ReplicationInterceptor.java:160) at org.jboss.cache.interceptors.ReplicationInterceptor.visitPutDataMapCo mmand(ReplicationInterceptor.java:113) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.base.CommandInterceptor.handleDefault(Co mmandInterceptor.java:131) at org.jboss.cache.commands.AbstractVisitor.visitPutDataMapCommand(Abstr actVisitor.java:60) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.TxInterceptor.attachGtxAndPassUpChain(Tx Interceptor.java:301) at org.jboss.cache.interceptors.TxInterceptor.handleDefault(TxIntercepto r.java:283) at org.jboss.cache.commands.AbstractVisitor.visitPutDataMapCommand(Abstr actVisitor.java:60) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.CacheMgmtInterceptor.visitPutDataMapComm and(CacheMgmtInterceptor.java:97) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.InvocationContextInterceptor.handleAll(I nvocationContextInterceptor.java:178) at org.jboss.cache.interceptors.InvocationContextInterceptor.visitPutDat aMapCommand(InvocationContextInterceptor.java:64) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.InterceptorChain.invoke(InterceptorChain .java:287) at org.jboss.cache.invocation.CacheInvocationDelegate.invokePut(CacheInv ocationDelegate.java:705) at org.jboss.cache.invocation.CacheInvocationDelegate.put(CacheInvocatio nDelegate.java:519) at org.jboss.ha.cachemanager.CacheManagerManagedCache.put(CacheManagerMa nagedCache.java:277) at org.jboss.web.tomcat.service.session.distributedcache.impl.jbc.JBossC acheWrapper.put(JBossCacheWrapper.java:148) at org.jboss.web.tomcat.service.session.distributedcache.impl.jbc.Abstra ctJBossCacheService.storeSessionData(AbstractJBossCacheService.java:405) at org.jboss.web.tomcat.service.session.ClusteredSession.processSessionR eplication(ClusteredSession.java:1166) at org.jboss.web.tomcat.service.session.JBossCacheManager.processSession Repl(JBossCacheManager.java:1937) at org.jboss.web.tomcat.service.session.JBossCacheManager.storeSession(J BossCacheManager.java:309) at org.jboss.web.tomcat.service.session.InstantSnapshotManager.snapshot( InstantSnapshotManager.java:51) at org.jboss.web.tomcat.service.session.ClusteredSessionValve.handleRequ est(ClusteredSessionValve.java:147) at org.jboss.web.tomcat.service.session.ClusteredSessionValve.invoke(Clu steredSessionValve.java:94) at org.jboss.web.tomcat.service.session.LockingValve.invoke(LockingValve .java:62) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(Authentica torBase.java:433) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValv e.java:92) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.proce ss(SecurityContextEstablishmentValve.java:126) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invok e(SecurityContextEstablishmentValve.java:70) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j ava:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j ava:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedC onnectionValve.java:158) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal ve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav a:330) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java :829) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce ss(Http11Protocol.java:598) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:44 7) at java.lang.Thread.run(Thread.java:619) 16:38:35,789 ERROR [CommandAwareRpcDispatcher] java.io.NotSerializableException: org.jboss.seam.util.AnnotatedBeanProperty 16:38:35,789 WARN [/a12] Failed to replicate session YwBL69cG-zdm0m5CvzNj3Q__ java.lang.RuntimeException: Failure to marshal argument(s) at org.jboss.cache.marshall.CommandAwareRpcDispatcher$ReplicationTask.ca ll(CommandAwareRpcDispatcher.java:374) at org.jboss.cache.marshall.CommandAwareRpcDispatcher$ReplicationTask.ca ll(CommandAwareRpcDispatcher.java:341) at org.jboss.cache.util.concurrent.WithinThreadExecutor.submit(WithinThr eadExecutor.java:82) at org.jboss.cache.marshall.CommandAwareRpcDispatcher.invokeRemoteComman ds(CommandAwareRpcDispatcher.java:206) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 748) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 716) at org.jboss.cache.RPCManagerImpl.callRemoteMethods(RPCManagerImpl.java: 721) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:161) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:135) at org.jboss.cache.interceptors.BaseRpcInterceptor.replicateCall(BaseRpc Interceptor.java:107) at org.jboss.cache.interceptors.ReplicationInterceptor.handleCrudMethod( ReplicationInterceptor.java:160) at org.jboss.cache.interceptors.ReplicationInterceptor.visitPutDataMapCo mmand(ReplicationInterceptor.java:113) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.base.CommandInterceptor.handleDefault(Co mmandInterceptor.java:131) at org.jboss.cache.commands.AbstractVisitor.visitPutDataMapCommand(Abstr actVisitor.java:60) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.TxInterceptor.attachGtxAndPassUpChain(Tx Interceptor.java:301) at org.jboss.cache.interceptors.TxInterceptor.handleDefault(TxIntercepto r.java:283) at org.jboss.cache.commands.AbstractVisitor.visitPutDataMapCommand(Abstr actVisitor.java:60) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.CacheMgmtInterceptor.visitPutDataMapComm and(CacheMgmtInterceptor.java:97) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.base.CommandInterceptor.invokeNextInterc eptor(CommandInterceptor.java:116) at org.jboss.cache.interceptors.InvocationContextInterceptor.handleAll(I nvocationContextInterceptor.java:178) at org.jboss.cache.interceptors.InvocationContextInterceptor.visitPutDat aMapCommand(InvocationContextInterceptor.java:64) at org.jboss.cache.commands.write.PutDataMapCommand.acceptVisitor(PutDat aMapCommand.java:104) at org.jboss.cache.interceptors.InterceptorChain.invoke(InterceptorChain .java:287) at org.jboss.cache.invocation.CacheInvocationDelegate.invokePut(CacheInv ocationDelegate.java:705) at org.jboss.cache.invocation.CacheInvocationDelegate.put(CacheInvocatio nDelegate.java:519) at org.jboss.ha.cachemanager.CacheManagerManagedCache.put(CacheManagerMa nagedCache.java:277) at org.jboss.web.tomcat.service.session.distributedcache.impl.jbc.JBossC acheWrapper.put(JBossCacheWrapper.java:148) at org.jboss.web.tomcat.service.session.distributedcache.impl.jbc.Abstra ctJBossCacheService.storeSessionData(AbstractJBossCacheService.java:405) at org.jboss.web.tomcat.service.session.ClusteredSession.processSessionR eplication(ClusteredSession.java:1166) at org.jboss.web.tomcat.service.session.JBossCacheManager.processSession Repl(JBossCacheManager.java:1937) at org.jboss.web.tomcat.service.session.JBossCacheManager.storeSession(J BossCacheManager.java:309) at org.jboss.web.tomcat.service.session.InstantSnapshotManager.snapshot( InstantSnapshotManager.java:51) at org.jboss.web.tomcat.service.session.ClusteredSessionValve.handleRequ est(ClusteredSessionValve.java:147) at org.jboss.web.tomcat.service.session.ClusteredSessionValve.invoke(Clu steredSessionValve.java:94) at org.jboss.web.tomcat.service.session.LockingValve.invoke(LockingValve .java:62) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(Authentica torBase.java:433) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValv e.java:92) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.proce ss(SecurityContextEstablishmentValve.java:126) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invok e(SecurityContextEstablishmentValve.java:70) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.j ava:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.j ava:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedC onnectionValve.java:158) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineVal ve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.jav a:330) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java :829) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.proce ss(Http11Protocol.java:598) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:44 7) at java.lang.Thread.run(Thread.java:619)

  Read the article

• How to enable Google Drive offline access

  - by Gopinath

  Google’s latest cloud offering Google Drive provides 5GB of free storage to let you store documents, spread sheets, photos and other stuff and access them using a variety of devices – PCs, Macs, smartphones and tablets. You can also set up offline access to Google Drive so that you can access files on the move even if you don’t have access to internet connection. To access Google Drive offline you need Chrome browser and here are the simple steps to be followed for setting up. Step 1:  Login to Google Drive and click the gear icon in the upper right of your window. Step 2: Select Set up Docs offline from the drop-down menu. The “Set up offline viewing of Google Docs” dialog will appear Step 3:  Authorize Google Chrome to store your Google Drive content by clicking on “Allow offline docs” and then install “Docs Chrome web app” by clicking on “Install from Chrome web store”. You’ll be taken to the Chrome web store, where you’ll need to click Install on the right-hand side of the browser window. Step 4: Once the app is installed, you’ll be taken to a Chrome page with the Google Docs app icon. Click the icon to go back to your Documents List. Google Chrome take few minutes to prepare Google Drive for offline access by downloading all the files to your local computer. Once it’s completed, you can access Google Drive files offline. To access files of Google Drive offline point your Chrome browser to drive.google.com. When offline your Google Docs stored on Google Drive are available in view only mode. You can open Google Documents, Spread sheets & Presentations and see the content but you can’t edit them.

  Read the article

• How to install my currrent Ubuntu based OS on to an extenal drive?

  - by Godel Fishbreath

  I have found urls to install ubuntu to a HD. But my current system has been upgraded and updated so often that it does not resemble anything on the web or on my drive disks. So giving my a url to how to install ubuntu will fail. Give me instead 'how to install my current Linux/Ubuntu based system (11.04) and all the upgrades to my external HD. Or alternately how to back up the OS into a bootable external HD. I am looking for either urls or a very complete explanation.

  Read the article

• IIS cache control header settings

  - by a_m0d

  I'm currently working on a website that is accessed over https. We have recently come across a problem where we are unable to view .pdf files or any other type of file that is sent as an attachment (Content-Disposition:attachment). According to Microsoft Knowledge Base this is due to the fact that Cache-Control is set to no-cache. However, we have a requirement that all pages be fully reloaded every time they are visited, so we have disabled caching on all pages (through our ASP code, not through IIS settings). However, I have made a special case of this one page that shows the attachment, and it now returns a header with Cache-Control:private and the expiry set to 1 minute in the future. This works fine when I test it on my local machine, using https. However, when I deploy it to our test server and try it, the response headers still return Cache-Control:no-cache. There is no firewall or anything between me and the server, so IIS itself must be adding these headers and replacing mine. I have no idea why it would do this, and it doesn't really make any sense, but it seems to be the only option at the moment (I haven't yet found any other place in the code that will change the cache headers). Can anyone point me to a possible place where IIS might be setting these header values?

  Read the article

• External-Harddisk drive couldn't run unless in safe mode

  - by zfm

  This is the strangest thing ever happened to me... I have an external harddisk drive (ext-HDD), bought around 2 years ago (don't know whether this is an important issue or not). Here, I have a video file (.avi) in my internal harddisk dive (HDD), it worked very well, then I copy it to my ext-HDD, but I couldn't run the file directly from my ext-HDD! I tried to copy it back to my HDD (from the ext-HDD), and now the copy couldn't be run on my HDD too. Remember that I copy the file, so the original one was still there. I tried to go to safe mode (forget to mention, I use Windows 7 Pro), and this is where the strange thing happened, the copied files (both in ext-HDD and HDD) can be run in this safe mode. So, my question is, what could actually be happened there? PS: My ext-HDD is Axioo, 250 GB, exFAT... Edited: Currently I used MacOSX, and the file in the harddisk still can't be run. I haven't tried safe mode for Mac (is there one?), but will try later (if there is)

  Read the article

• Hibernate - query caching/second level cache does not work by value object containing subitems

  - by Zoltan Hamori

  Hi! I have been struggling with the following problem: I have a value object containing different panels. Each panel has a list of fields. Mapping: <class name="com.aviseurope.core.application.RACountryPanels" table="CTRY" schema="DBDEV1A" where="PEARL_CTRY='Y'" lazy="join"> <cache usage="read-only"/> <id name="ctryCode"> <column name="CTRY_CD_ID" sql-type="VARCHAR2(2)" not-null="true"/> </id> <bag name="panelPE" table="RA_COUNTRY_MAPPING" fetch="join" where="MANDATORY_FLAG!='N'"> <key column="COUNTRY_LOCATION_ID"/> <many-to-many class="com.aviseurope.core.application.RAFieldVO" column="RA_FIELD_MID" where="PANEL_ID='PE'"/> </bag> </class> I use the following criteria to get the value object: Session m_Session = HibernateUtil.currentSession(); m_Criteria = m_Session.createCriteria(RACountryPanels.class); m_Criteria.add(Expression.eq("ctryCode", p_Country)); m_Criteria.setCacheable(true); As I see the query cache contains only the main select like select * from CTRY where ctry_cd_id=? Both RACountryPanels and RAFieldVO are second level cached. If I check the 2nd level cache content I can see that it cointains the RAFields and the RACountryPanels as well and I can see the select .. from CTRY where ctry_cd_id=... in query cache region as well. When I call the servlet it seems that it is using the cache, but second time not. If I check the content of the cache using JMX, everything seems to be ok, but when I measure the object access time, it seems that it does not always use the cache. Cheers Zoltan

  Read the article

• Synchronizing local and remote cache in distributed caching

  - by ltfishie

  With a distributed cache, a subset of the cache is kept locally while the rest is held remotely. In a get operation, if the entry is not available locally, the remote cache will be used and and the entry is added to local cache. In a put operation, both the local cache and remote cache are updated. Other nodes in the cluster also need to be notified to invalidate their local cache as well. What's a simplest way to achieve this if you implemented it yourself, assuming that nodes are not aware of each other. Edit My current implementation goes like this: Each cache entry contains a time stamp. Put operation will update local cache and remote cache Get operation will try local cache then remote cache A background thread on each node will check remote cache periodically for each entry in local cache. If the timestamp on remote is newer overwrite the local. If entry is not found in remote, delete it from local.

  Read the article

• Using a flash drive to speed up conventional disks (on linux)

  - by Daniel

  Hi! Is there a possibility to use a flash drive as a speed up for conventional hard disks? I got the idea to redirect all read ops to the flash drive if the data is already stored there, and to read from the conventional disks if the data is not found there (and during idle time the freshly accessed data from the conventional disk is stored on the flash disk). Is this already possible with linux standard tools?

  Read the article

• Intel RST accidentally selected wrong drive as system drive -- how to fix?

  - by Sean Killeen

  Question / TL;DR If Intel RST has marked a drive other than my RAID set as the system drive, how can I get it so that the RAID set is now seen as the system drive, and catch it up to my drive now? What Happened NOTE: Some perhaps unwise decisions are ahead. This is as best as I can recall the order of things. I had a 2x1TB RAID1 config. I bought the drives around the same time, and they started to die around the same time. I replaced 1st drive with a 2 TB drive before the other one's SMART errors got more serious. I waited for the RAID to replicate, then replaced the 2nd drive with a manufacturer's replacement. I got a second manufacturer's drive replacement and used it as a spare. so I now I had a 1TB/2TB drive in a RAID1 and another 1TB as a spare. The 1TB drive in the replacement set was bad from the manufacturer. Rather than mess with their refurbished stuff, I bought another 2 TB drive an upped the config to a 2x2TB RAID1 with the other, functioning manufacturer's drive as a spare. I made the mistake of trying to bring the other drive online to clean it out and the signatue clash killed my machine. When the machine rebooted, that drive was marked as the system drive. So, I have a 2x2TB RAID1 that is apparently offline, and 1 spare 1 TB refurbished drive that everything is being run from. Not a great idea. Options I'm considering Bring the 2x2TB drive back online, and then unplug the spare until I can format it in another system. This would involve some data loss, but the more I think about it, I actually think I haven't modified any data that isn't backed up or synced somewhere (go me!) Anything that isn't is likely trivial, enough that I'm willing to take the risk. One downside here is that if the 2 TB doesn't have data on it for some reason, I could be screwed trying to put the other drive back in, no? Try to somehow get the RAID1 updated with the data from the current system drive. Option 3?

  Read the article

• USB stick appearing as hard disk drive, not removable storage device

  - by Paul Lammertsma

  I just plugged in a very simple 1GB USB stick from the office in hopes of making it a Fedora Live USB stick. For that to work, I need a removable storage device, or else it won't appear in LiveUSB Creator's list. Explorer lists my USB stick as a hard disk: LiveUSB Creator indeed doesn't show it in the device list: Is there any way of forcing Windows to see the stick as a removable storage device?

  Read the article

• using one disk as cache for others

  - by HugoRune

  Hi Given a PC with several hard drives: Is it possible to use one fast disk as a giant file cache? I.e. automatically copying frequently accessed data to that one disk, and transparently redirecting reads and writes to that disk, so that other drives would only have be accessed occassionally. (writes would have to be forwarded to the other disks after a while of course) Advantages: the other drives could be powered down most of the time; reducing power, heat, noise speed of the other drives would not matter much. cache disk could be solid state. How can I set such a system up? What OS supports these options? Is this possible at all using Windows or Linux?

  Read the article

• Lenovo S10 Ideapad will not boot while original hard drive is installed, neither from hard drive or

  - by aki

  Hello, first time posting here so I'll try to be very clear. I have a Lenovo S10 Ideapad netbook which fails to boot to an OS. It shows the Lenovo splash screen and can get to the BIOS but it doesn't get to GRUB (was dual booting Ubuntu 9.10 and Win 7, was working fine for months, ie this isn't a new dual boot gone bad). After the splash screen it displays a flashing cursor in the upper left corner. Power cycled to no avail. Here is what I have done trying to narrow the problem down: The machine will boot to Ubuntu using an install/live USB drive, but only if ANOTHER hard drive is installed or NO hard drive is installed. The boot order always lists USB first. Also, there is a 2 gb RAM upgrade but I think that's fine; the Ubuntu USB drive boots fine with it, and "free" sees the whole 2gb of memory. So it seems like the hard drive is bad. I was able to put the bad drive in a different laptop and mount it to recover files. I'm ready to replace the bad hard drive, but I would like to know if this situation makes any sense. If the hard drive is bad, shouldn't I still be able to boot with the Ubuntu USB drive while the bad drive is installed? I would have expected the machine to boot into Ubuntu anyway even if with a bad drive, since the boot order lists USB first. But it seems that when the bad drive is installed, the machine ignores the USB drive and hangs with the flashing cursor. Thanks for any ideas! Sorry for the long post, I just want to put all the info I have up front! Basically I'm going to buy a new drive, but I am mostly curious if this is a typical or at least not unusual situation.

  Read the article

• Trouble cloning a Macbook Pro hard drive

  - by Mirko Froehlich

  I am trying to upgrade the 250GB hard drive in my MacBook Pro (early 2008 model) to a 750GB drive. I have connected the new drive via an external USB enclosure. The drive is recognized fine, I can format it, etc. However, every time I try to clone the drive, I am getting Input/Output errors. Before the clone operation, I have verified both the internal and the external drive using Disk Utility, and they both check out fine. After the clone operation, the external drive shows multiple "Invalid node structure" errors: I have tried two approaches for cloning the drive: Using Disk Utility, by starting from the OSX install DVD Using Carbon Copy Cloner The outcome is the same in both cases. The Carbon Copy Cloner logs show a handful of the following types of errors: rsync: mkstemp "<... an external filename ...>" failed: Input/output error (5) rsync: stat "<... an external filename ...>" failed: Input/output error (5) The actual files affected seem to be different across different runs of the application. Before the last run, I used Disk Utility to (once more) reformat the external drive and explicitly overwrite it with zeros, but this made no difference. I also tried running a surface scan in Tech Tool Pro overnight. It got about 2/3 of the way through before I had to disconnect the drive (had to take my MacBook Pro to work), but so far it didn't report any bad blocks. Assuming it scans the drive in the same order in which blocks would be allocated during actual use, it seems like if bad blocks were to blame for the clone failures, they should have been found already (given that the source drive is only 250GB). As a last attempt, I may try SuperDuper as well, although my understanding is that it uses the same underlying rsync approach as Carbon Copy Cloner, so it's unlikely to perform any better. Are there any other things I should try before I send the drive in for a replacement? Could these problems be caused by my internal drive, even though it works fine and checks out fine in Disk Utility?

  Read the article

• A faulty Caviar Blue hard drive?

  - by Glister

  We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

  Read the article

• Flash drive suddenly died. Why? Can I recover it?

  - by mg

  Hi, I have a flash drive that I used not too much but, after few month of inactivity, it died. I know that flash drives have a limited write cycles but I am sure that this is not the problem. I tried to create a new partition table and format the drive nothing worked. This is the output of mkfs.ext2. marco@pinguina:~$ sudo LANG=en.UTF-8 mkfs.ext2 -v -c /dev/sdc1 [sudo] password for marco: mke2fs 1.41.11 (14-Mar-2010) fs_types for mke2fs.conf resolution: 'ext2', 'default' Calling BLKDISCARD from 0 to 4001431552 failed. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 244320 inodes, 976912 blocks 48845 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=1002438656 30 block groups 32768 blocks per group, 32768 fragments per group 8144 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Running command: badblocks -b 4096 -X -s /dev/sdc1 976911 badblocks: Input/output error during ext2fs_sync_device Checking for bad blocks (read-only test): done Block 0 in primary superblock/group descriptor area bad. Blocks 0 through 2 must be good in order to build a filesystem. Aborting.... Is there something I can do to recover it?

  Read the article

• Generic wrapper for System.Web.Caching.Cache functions

  - by David Neale

  I've created a generic wrapper for using the Cache object: public class Cache<T> where T : class { public Cache Cache {get;set;} public CachedKeys Key {get;set;} public Cache(Cache cache, CachedKeys key){ Cache = cache; Key = key; } public void AddToCache(T obj){ Cache.Add(Key.ToString(), obj, null, DateTime.Now.AddMinutes(5), System.Web.Caching.Cache.NoSlidingExpiration, System.Web.Caching.CacheItemPriority.Normal, null); } public bool TryGetFromCache(out T cachedData) { cachedData = Cache[Key.ToString()] as T; return cachedData != null; } public void RemoveFromCache() { Cache.Remove(Key.ToString()); } } The CachedKeys enumeration is just a list of keys that can be used to cache data. The trouble is, to call it is quite convuluted: var cache = new Cache<MyObject>(Page.Cache, CachedKeys.MyKey); MyObject myObject = null; if(!cache.TryGetFromCache(out myObject)){ //get data... cache.AddToCache(data); //add to cache return data; } return myObject; I only store one instance of each of my objects in the cache. Therefore, is there any way that I can create an extension method that accepts the type of object to Cache and uses (via Reflection) its Name as the cache key? public static Cache<T> GetCache(this Cache cache, Type cacheType){ Cache<cacheType> Cache = new Cache<cacheType>(cache, cacheType.Name); } Of course, there's two errors here: Extension methods must be defined in a non-generic static class The type or namespace name 'cacheType' could not be found This is clearly not the right approach but I thought I'd show my working. Could somebody guide me in the right direction?

  Read the article

• Does Hard Drive Orientation Affect Its Lifespan?

  - by Jason Fitzpatrick

  Many cases allow you to mount drives in vertical or horizontal configurations and external drives can be easily repositioned. Does the orientation of the hard drive affect the performance and longevity of the drive? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

  Read the article

• Why can't 12.04 installer see one of my hard drives

  - by imparatore

  I'm trying to install Ubuntu 12.04 32-bit from a USB pen drive. I have two drives, a WD Caviar Black and a Samsung SPC250. At the "installation type" stage, it only sees my Samsung and the USB pen drive, not the WD. I checked the drive with gparted and everything seems fine. I tried the alternate installer but that doesn't work either I tried changing from IDE to AHCI in the BIOS and back What can I do now?

  Read the article

• hibernate query cache specify cache duration

  - by cometta

  below is how i do query cache getHibernateTemplate().setCacheQueries(true); List<IssSection> result = (List<IssSection>) getHibernateTemplate().findByCriteria(crit); getHibernateTemplate().setCacheQueries(false); may i know how to specify duration of maximum time to cache this method? let say i want to clear cache after 5 mins expirated

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >