Search Results

Search found 6815 results on 273 pages for 'micro sd card'.

Page 4/273 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• IOCTL call error when trying to format an SD card

  - by masfenix

  Found an SD card (1GB) lying around. Thought I might pop that into my card reader and see if anything is on it. Nothing. There isn't even a file system on it. I right-click and go "format" but nothing happens. So I try in command. > format f: Insert new disk for drive F: and press ENTER when ready... Error in IOCTL call. What does this mean?

  Read the article

• recover lost files from sd card(digital camera)

  - by user23950

  How do I recover lost data from sd card? I already tried using: Photorec Recuva Tune up undelete Pareto data recovery chkdsk x: /F from here: http://superuser.com/questions/128259/how-to-recover-images-from-memory-card But none of them worked. I think I've only lost the data yesterday. And I haven't used the camera. So there's a possibility that it is still there. But the question is how I can recover the images? I think its lost when I tried to connect the digicam with the computer. But the camera froze so I tried to remove the batteries then try again.

  Read the article

• Recover data from SD card

  - by Paul Tarjan

  I have a 2GB kingston microSD card which is about 3 years old. I put it in a reader today in my Windows Vista computer, wrote a 32MB file onto it, safely removed it, and then tried to read it elsewhere. Nothing. Putting it back in vista it now says You need to format the disk in drive F: before you can use it. What should I do? I have access to many computers and OSes if your recommendations need that. I would be very sad if I lost all the contents of the card. Most of the data is backed up, but there are a few things that aren't. :( Doing a # dd if=/dev/sdg of=~/tmp/sd.bin gives me a 2 gig file, and grepping the file it seems like lots of my data is still there, how can I put it back together?

  Read the article

• Mobility Card in Bangalore for Transportation

  - by Rekha

  Transport Minister R Ashoka announced Bangalore Metropolitan Transport Corporation (BMTC) services are going to be best in the world soon. BMTC has planned to launch a Mobility Card with which commuters can get rides in BMTC, KSRTC and future Metro Train facilities without buying tickets for each ride. The conductor with have a simple device in which the commuters can swipe their cards to deduct the ticket tarrif for bus or metro rides automatically. This Mobility card can be obtained by paying a fixed amount. This method is time saving and the commuters can be saved from paying the exact change for tickets. Ashoka says the Volvo Vayu Vaira services have internet connectivity and voice announcements of every bus stop names and this has been appreciated by the commuters. With WiFi Connections in Shatabdi Trains soon and Mobility Cards, India is soon to match the services of US Standards. Government officials are keen in implementing these services before the end of this year. Hope all these services are well used and maintained.   This article titled,Mobility Card in Bangalore for Transportation, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Determine formatting of SD card in Ubuntu

  - by ben

  How do I, in Ubuntu, determine what the formatting (e.g FAT etc.) of an SD card is? Thanks.

  Read the article

• How to access an SD card from a virtual machine?

  - by Punit Soni

  I want to format an SD card from my Linux virtual machine. I have a built-in SD card reader in my laptop. I tried using VirtualBox and VMware Player and installed Ubuntu 10.04 guest. None of them are showing the SD card reader as a device. I can access the SD card from the Windows host. I am not interested in solutions using shared folders as I want to access the SD card as hardware (it should show up in /dev). I basically want to set up the SD card for BeagleBoard, but I don't want to install physical Ubuntu in my PC.

  Read the article

• No HDMI audio in 13.04

  - by King84

  I have just upgraded from 12.10 to 13.04 and now everything works perfectly, except the fact that I have no audio via HDMI. I am using a Samsung tv-monitor connected via HDMI to my video card Asus EAH4670/DI/1GD3 (which has a Radeon HD 4670 gpu on it), installed phisically into my motherboard which is a MSI 770-C45. I am running kernel 3.9, I just have no sound. I tried downloading and installing https://code.launchpad.net/~ubuntu-audio-dev/+archive/alsa-daily/+files/oem-audio-hda-daily-dkms_0.201304261252~raring1_all.deb , but without any good result. Please help, I need my audio back. In the end, this is my lspci command output. ale@beast:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (external gfx0 port A) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RD790 PCI to PCI bridge (PCI express gpp port C) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 XT [Radeon HD 4670] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03) ale@beast:~$

  Read the article

• Ubuntu 12.10 Trackpoint not detected Thinkpad X130e

  - by killerknives

  I just did a fresh install of 12.10 and now only my touchpad works. The trackpoint and Left/Right buttons below the trackpoint do not work. The trackpoint worked fine as of 12.04. I've searched online and there was a hack that said that disabling the touchpad would enable the trackpoint. WRONG! You'll end up having to use the keyboard =/. I don't know what is needed so I'll just dump some stuff. lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:05.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:06.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:07.0 PCI bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Port 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) I've installged gpointing-device-setting and it only lists the touchpad. No trackpoint. What should I do? What data do you need?

  Read the article

• How to Apply a Business Card Template to a Contact and Customize it in Outlook 2013

  - by Lori Kaufman

  If you want to add a business card template to an existing contact in Outlook, you can do so without having to enter all of the information again. We will also show you how to customize the layout and format of the text on the card. Microsoft provides a couple of business card templates you can use. We will use their Blue Sky template as an example. To open the archive file for the template you downloaded, double-click on the .cab file. NOTE: You can also use a tool like 7-Zip to open the archive. A new Extract tab becomes available under Compressed Folder Tools and the files in the archive are listed. Select the .vcf file in the list of files. This automatically activates the Extract tab. Click Extract To and select a location or select Choose location if the desired location is not on the drop-down menu. Select a folder in which you want to save the .vcf file on the Copy Items dialog box and click Copy. NOTE: Use the Make New Folder button to create a new folder for the location, if desired. Double-click on the .vcf file that you copied out of the .cab archive file. By default, .vcf files are associated with Outlook so, when you double-click on a .vcf file, it automatically opens in a Contact window in Outlook. Change the Full Name to match the existing contact to which you want to apply this template. Delete the other contact info from the template. If you want to add any additional information not in the existing contact, enter it. Click Save & Close to save the contact with the new template. The Duplicate Contact Detected dialog box displays. To update the existing contact, select the Update information of selected Contact option. Click Update. NOTE: If you want to create a new contact from this template, select the Add new contact option. With the Contacts folder open (the People link on the Navigation Bar), click Business Card in the Current View section of the Home tab. You may notice that not all the fields from your contact display on the business card you just updated. Double-click on the contact to update the contact and the business card. On the Contact window, right-click on the image of the business card and select Edit Business Card from the popup menu. The Edit Business Card dialog box displays. You can change the design of the card, including changing he background color or image. The Fields box allows you to specify which fields display on the business card and in what order. Notice, in our example, that Company is listed below the Full Name, but no text displays on the business card below the name. That’s because we did not enter any information for Company in the Contact. We have information in Job Title. So, we select Company and click Remove to remove that field. Now, we want to add Job Title. First, select the field below which you want to add the new field. We select Full Name to add the Job Title below that. Then, we click Add and select Organization | Job Title from the popup menu to insert the Job Title. To make the Job Title white like the name, we select Job Title in the list of Fields and click the Font Color button in the Edit section. On the Color dialog box, select the color you want to use for the text in the selected field. Click OK. You can also make text bold, italic, or underlined. We chose to make the Job Title bold and the Full Name bold and italic. We also need to remove the Business Phone because this contact only has a mobile phone number. So, we add a Mobile Phone from the Phone submenu. Then, we need to remove enough blank lines so the Mobile Phone is visible on the card. We also added a website and email address and removed more blank lines so they are visible. You can also move text to the right side of the card or make it centered on the card. We also changed the color of the bottom three lines to blue. Click OK to accept your changes and close the dialog box. Your new business card design displays on the Contact window. Click Save & Close to save the changes you made to the business card for this contact and close the Contact window. The final design of the business card displays in the Business Card view on the People screen. If you have a signature that contains the business card for the contact you just updated, you will also need to update the signature by removing the business card and adding it again using the Business Card button in the Signature editor. You can also add the updated Business Card to a signature without the image or without the vCard (.vcf) file.     

  Read the article

• Graphics card initialisation problems when booting - requires a "double" boot

  - by DMA57361

  Problem Outline When booting from cold (and my machine is disconnected from main power when off, but leaving it connected doesn't help) the graphics card (single PCI-e card GeForce 460) will not initialise on the first boot, leaving me with the motherboards on-board graphics (which kick in automatically if no PCI-e card is found). However, if I restart the computer - normally I do this by powering it off just after the numlock lights up on the keyboard (ie, just after POST/BIOS and before Windows takes over), wait for the system to whirr down, and power up again - the graphics card will work correctly. Once double-booted in this matter the system seems to work correctly - with no noticeable problems. This is reproducible every time I try to boot - it has been working like this for about a month now. Background Information Sept 2010 - I suffered a hardware malfunction (crashes in Windows and graphics corruption on BIOS screens). By way of spare hardware I determined that replacing the PSU removed the issue, so I replaced the PSU with a brand new one of slightly higher power (460W replaced with 500W). Oct 2010 - The problem resurfaced. I purchased a new graphics card (GeForce 460), which removed the problem. The new graphics card immediately started having the boot initialisation problems mentioned. I presumed there was a motherboard fault all along, but because the system worked once booted, and I was temporarily out of spare money, I left the system alone and continued to use it. Early/Mid Dec 2010 - In the space of 5 days I recieved 3 instances of hard drive corruption (seemlingly fixed by chkdsk and sfc in each case...). Since I was already under the impression the motherboard was faulty, I purchased a new one ASAP, this also required new RAM (as I dropped from 4 slots to 2 and didn't want to drop mem quantity). Past 3-4 weeks - With a brand new PSU, Graphics Card, Motherboard and RAM I'm suffering the problem outlined above. So, what could be causing this and how do I can resolve it? Additional Notes Once double-booted the system seems to work entirely correctly. The graphics card problem has occured on two entirely different motherboards. I do not have the opportunity to test the graphics card in a different computer (I've only the old motherboard, which is dubious, or a really old desktop that still has an AGP port). Under load (ie, modern games for long enough for temperatures to plateau) the system remains stable and performs as expected. The software that came with the new motherboard and SpeenFan both report all voltages and temperatures are within nominal bounds, when idle and when under load. I've looking over the BIOS settings for my motherboard multiple times and can find nothing that helps. This system is configured to run with everything at standard levels - no overclocking. I've tried booting the system with only the mobo and graphics card connected (thinking maybe my new PSU was too weak for the new gfx card, even though it meets the quoted PSU requirements for the card) but the same problem persists (and really if the PSU was weak I'd have problems with the system under load). When the gfx card does not initialise the fan on its cooling unit is running, possibly slower than otherwise - but this measurement is by eye and so unreliable.

  Read the article

• Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

  - by Sven

  After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

  Read the article

• my LaCie 500 Gb not mounted on 11.10

  - by pooo

  My external USB drive was recognized with 10.x versions of Ubuntu but since 11.x I am getting stuck, I had tried everything I read in forums but still the same error: 4956.401052] usb 2-1.4: new high speed USB device number 14 using ehci_hcd [ 4956.539216] scsi14 : uas [ 4956.740955] scsi 14:0:0:0: Direct-Access LaCie Rugged FW USB3 1081 PQ: 0 ANSI: 4 [ 4963.256055] scsi 14:0:0:0: uas_eh_abort_handler tag 0 [ 4963.256076] scsi 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4963.256085] scsi 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4963.256091] scsi 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4963.328122] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4963.468743] scsi 14:0:0:0: Device offlined - not ready after error recovery [ 4963.468813] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.468831] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.469204] scsi 14:0:0:1: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [ 4963.512104] sd 14:0:0:0: Attached scsi generic sg3 type 0 [ 4994.253779] sd 14:0:0:0: uas_eh_abort_handler tag 0 [ 4994.253802] sd 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4994.253809] sd 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4994.253815] sd 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4994.325880] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4994.466488] sd 14:0:0:0: Device offlined - not ready after error recovery [ 4994.466555] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466573] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466582] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466588] sd 14:0:0:0: [sdc] READ CAPACITY failed [ 4994.466593] sd 14:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 4994.466600] sd 14:0:0:0: [sdc] Sense not available. [ 4994.466608] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466616] sd 14:0:0:0: [sdc] Write Protect is off [ 4994.466622] sd 14:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 4994.466629] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466635] sd 14:0:0:0: [sdc] Asking for cache data failed [ 4994.466640] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 4994.467003] sd 14:0:0:0: [sdc] Attached SCSI disk if I am trying on an old ubuntu, the drive is mounted,

  Read the article

• SIM card number swap

  - by DaGhostman Dimitrov

  Is it possible to swap two numbers between two sim cards (I am just got an new phone and it is using a micro sim) And I have a old number that I want to use but it is on standart sim card. Is it possible to swap the numbers between the cards using a SIM Card reader. What software and hardware should I use? Note: I have talked with my provider but I have to cancel my old numbers contract but I like it and do not want to pay the remaining period of the contract to turn it in to PayAsYouGo and then swap ..

  Read the article

• My computer is not reading my PNY SD 1GB memory card

  - by Jessica

  I use a Kodak EasyShare C160 digital camera, a PNY SD 1GB memory card, and a Dell Latitude E5500 computer. I have had my camera for over a year and have always been able to transfer my pictures to my computer. Now my computer does not recognize my memory card and I get a message from the EasyShare software that says "Cannot get device information", although my computer does recognize the pictures stored on my camera's internal memory. Is there any way to access the pictures on my memory card, or are they lost forever?

  Read the article

• Virtual Sd-card won't transfer [migrated]

  - by Hyztname

  I have a Verizon Galaxy Nexus 32GB. I've installed AOKP on it and it has been running pretty okay with no bugs etc... But after I connected it too my Nintendo Wii I think it mounted sdcard as FAT32 itself :\ I'm receiving the following error when trying to download something from 4Shared sync app(But actually none can download or transfer anything to Virtual sdcard): XXXXX.apk: open failed: EACCES(Permission denied) I already restored my old backup wiped all data etc, nothing seems to work. Note that I can access my sd-card, i can't only transfer, take pics... basically data. PS: I showed 4sync problem because it was the only one that specify something

  Read the article

• Choice of filesystem for GNU/Linux on an SD card

  - by gspr

  Hi. I have am embedded ARM-based system running on an SD card. It's currently Debian GNU/Linux using ext3 as filesystem. As I'm about to reinstall the system, I started wondering about changing to a more flash-friendly filesystem. I've heard about JFFS2, YAFFS2 and LogFS, and they all seem suited to the job. Which one would you recommend? Also, I've heard there have been a lot of ext4 improvements to better suit SSD disks; am I to interpret that as running ext4 should be just fine? What do I need to think especially about in that case? I guess the usage of the system is important. But for the sake of generality, imagine it'll do standard desktop stuff (even though it is infact a small ARM-based system). Thanks for any replies. Edit: Wikipedia tells me (in a "citation needed" statement) that Removable flash memory cards and USB flash drives have built-in controllers to perform wear leveling and error correction so use of a specific flash file system does not add any benefit. Thus, I'm leaning towards sticking with an ext filesystem.

  Read the article

• How to stabilize PCIe sound card in its card slot?

  - by Josh

  I have a Soundblaster Recon 3d Fatal1ty sound card and randomly every once in a while my computer won't recognize it. I am almost 100% sure it is something to do with its PCIe slot. After I turn off the computer and just wiggle the card a bit, the computer recognizes the card once I restart. I can't really try it in the other PCIe slot because the video card gets in the way. It is a Biostar TA970XE motherboard. I don't know if it is something to do with the pins on the actual card or if it is something to do with the slot. I couldn't find any related issues about this card on Google. Is there anything I can do to help secure the card in its slot so that my computer will recognize it? Any help is appreciated.

  Read the article

• Problem with fitting graphics card

  - by Gary Robinson

  I have recently purchased a new radeon hd5670 graphics card. The problem I have is that it is what I might call a double height card. So the end where you fix the card to the case is twice the size of the card it is replacing. But this means that it is blocked by the rear of the network card. The only way I can see it to cut that part of the fixture part out then I won't have a problem. But has anyone any suggestions what I could use? To be clear it is not the actual card it is the fixture part which is 90 degress to the card that is causing the problem. Unless someone knows of another solution - some kind of pci-e extender that I could use as I could easily

  Read the article

• Copying large file from SD to HDD via USB failing on Ubuntu

  - by Kent Boogaart

  Hi, I'm attempting to copy some large files from my camera (Canon EOS 500D) to my laptop, which is running 64 bit Ubuntu 9.04. I am using USB to connect the two devices. For most files, it is simply a matter of control-C and control-V. I have done this successfully many times with both photos and small movies (eg. 180MB). However, when I attempt to do this with very large files (eg. 3GB), the copy seems to start with a lot of activity both on the camera and laptop, but after 10 minutes or so the camera is automatically unmounted and the copy fails to complete. I have read that this might be due to the device not mounting as a mass storage device, but I cannot see any obvious way for me to change this behavior. Can anyone offer any direction here? I'll get a USB card reader if necessary, but I'd prefer to be able to just plug my camera in. Thanks

  Read the article

• Turn-based Client-Server Card Game - Unicast (TCP) or Multicast (UDP)

  - by LDM91

  I am currently planning to make a card game project where the clients will communicate with the server in a turn-based and synchronous manner using messages sent over sockets. The problem I have is how to handle the following scenario: (Client takes it turn and sends its action to server) Client sends a message telling the server its move for the turn (e.g. plays the card 5 from its hand which needs to placed onto the table) Server receives messages and updates game state (server will hold all game state). Server iterates through a list of connected clients and sends a message to tell of them change in state Clients all refresh to display the state This is all based on using TCP, and looking at it now it seems a bit like the Observer pattern. The reason this seems to be an issue to me is this message doesn't seem to be point-to-point like the others as I want to send it to all the clients, and doesn't seem very efficient sending the same message in that way. I was thinking about using multicasting with UDP as then I could send the message to all the clients, however wouldn't this mean that the clients would in theory be able to message each other? There is of course the synchronous aspect as well, though this could be put on top of the UDP I guess. Basically, I would like to know what would be good practice as this project is really all about learning, and even though it won't be big enough to encounter performance issues from this I would like to consider them anyway. However, please note I am not interested in using message oriented middleware as a solution (I have experience with using MOM and I'm interested in considering other options excluding MOM if TCP sockets is a bad idea!).

  Read the article

• LIfebook lh531 inbuilt card reader not working

  - by chandrasekar

  Inbuilt card reader (SD/PRO/SDHC) not working. When I insert the memory card the indicator comes for a milli second and nothing happens. When I do lspci it gives the out put which is pasted below: I use Ubuntu 11.10. Pl help pro-hq@prohq-LIFEBOOK-LH531:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) pro-hq@prohq-LIFEBOOK-LH531:~$

  Read the article

• Do i need to join Graphics Card with CPU fan

  - by Mirage

  Initially i had inno 3d 256MB Nvidia GTS graphics card. I also had another Big FAN above the processor (Vendor put in quad core) In that card there was one cable which was joined with that FAN. Now i have changed the CARD to 1GB Nvidia GT9600 . But there is no pins to join the fan with that card. Is it ok . i don't know why old card was joined with FAN

  Read the article

• Is it possible to install a discrete mobility card on a laptop without a graphics card already?

  - by JXPheonix

  To be specific: Can I: Install a discrete graphics card on a laptop that does not come with a discrete graphics card? Teach windows 8 to use the discrete card over the integrated graphics? To me this is the only downside of my laptop and I would not mind getting any graphics card as long as it is better than the integrated laptop card (an Intel 3000) The laptop if you need more information is an Asus U46E-BAL6.

  Read the article

• OEM sound card with no drivers or support

  - by randy

  I thought my sound card was going out so I bought a sound card online. Everything seemed to work ok, I do have sound. But after a few months, I noticed the extra software that downloaded with the sound card drivers didn't work. I ended up contacting creative and after a month of e-mail support, they asked for the serial number and/or model number. Their reply back was I had purchased an OEM sound card and they could not provide support for that, and informed me that that is why their drivers and software didn't work. They informed me that I had to contact the company that distributed the sound card and install their software. Is there anything I can do to find out who distributed this sound card, or is there anything I can do to get other features to work? I have 4 speakers and a sub but only 2 speakers produce sound. The only control I have is the volume. Creative's driver update program will find my sound card, download updates and even added software, but if I try to click on a downloaded program like Creative's Toolbox or Media Center, I get an error that it cannot find the devise. That is why I contacted creative in the first place. EDIT Thanks for the responses everyone. Here's an update. I thought I'd go thru my old computer stuff for my classes at school. I have a lot of old stuff saved, boxes and cables and stuff. I found the box the sound card came in. It looks like a box you'd buy at the store, like Best Buy or CompUSA. I worked with creative for such a long time, it went past the point of being able to return it to the junk online store this shipped from. The box did have an install CD, so I thought I'd start over to reinstall the drivers and software that shipped with the card. I noticed that the install would uninstall a program, then reinstall it. so I thought things were working out. But no good. Everything still works but the programs were still bad. I'd get an error trying to load them - not found. I'll look on the card the next time I get a chance and see if I can spot any kind of name on it.

  Read the article

• My 4 GB microSD card only allows me to use 1 GB

  - by James Litewski

  My phone came with a 4 GB microSD card. On the card it lists that 3 GB goes to Muve Music which is Cricket's music program, and I get 1 GB... Well, I don't pay for Muve Music, so why waste the space? I thought I'd be able to simply buy an adapter and reformat the microSD card to get the full 4 GB; but that wasn't the case... I could only find the 1 GB partition on the card. I even tried reformatting the disk, but I had no luck. How can I get the full 4 GB? BTW, I'm running Mac OS X v10.7 (Lion).

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >