Search Results

Search found 6815 results on 273 pages for 'micro sd card'.

Page 5/273 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Wireless Problem on HP Pavillion G6

  - by user47954

  I have a broadcom wireless card in my laptop and the wireless is not working correctly. right in front of the router the wireless signal is 70% and across the room it barely works and in another room it disconnects. i have the drivers and everything. i am running ubuntu 11.10 64bit.it works perfectly in windows 7. can anyone help! 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9649] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7804] Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) Kernel modules: i2c-piix4 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:15.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a0] Kernel driver in use: pcieport Kernel modules: shpchp 00:15.1 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a1] Kernel driver in use: pcieport Kernel modules: shpchp 00:15.2 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:43a2] Kernel driver in use: pcieport Kernel modules: shpchp 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) Kernel driver in use: r8169 Kernel modules: r8169 07:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01) Kernel driver in use: wl Kernel modules: wl 08:00.0 Class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5209] (rev 01)

  Read the article

• What should a freelancer's business card have?

  - by Sergio

  For example, when I first started out freelancing a year ago, my business card had my name, email and website - and up top a list of the technologies I'm comfortable with. In retrospect I don't feel this was a wise decision. Why would a potential client know what Python or Ruby is? How could he know what .NET was? I still have a couple of the old batch left, but I'm going to send out for some new cards. What do you recommend we developers have to show on our business cards? Am I correct in thinking listing technologies is meaningless to potential clients?

  Read the article

• Ideas for card deck names [closed]

  - by Milan Babuškov

  I'm creating a card game, and wish to offer players to choose from different sets of playing cards. The game logic remains the same, only the design and graphics on the cards would be different. It would feature classic French set, German/Hungarian one, and a bunch of other custom designed ones. I'm looking for some cool names to give to those sets. I thought maybe to use names of some world cities like "London set", "Paris set", "Tokyo set", but there might be something better. I know this is really open-ended question, so there might not be a definitive "correct" answer, but I hope this kind of brainstorming would be useful to anyone looking for ideas to name a set of... well, anything. I'll up-vote any good idea, no matter if I don't end up using any of those.

  Read the article

• (re)mounting the SD card on android emulator

  - by Lo'oris

  On the emulator, I can unmount the SD card from the Settings. On OSX, I can then mount it using hdiutil, then unmount it normally. I haven't been able to figure out how to re-mount it then on the emulator (without rebooting it). hints: the adb command remount is unrelated: it's about /system the emulator command is unrelated: it's only about starting the emulator mounting the SD card on OSX without unmounting it from the emulator causes horrible pain to the emulator

  Read the article

• manually put files to android emulator sd card

  - by poeschlorn

  Hi guys, I'm just having trouble with getting my emulator SD card work... I created a new AVD device with a new SD card. So how to put data onto it? I found the "correct" file to be mountet on Deamon tools, but is currupt or simply not readable... It would be great if you have any idea :)

  Read the article

• Micro Focus lance Enterprise Developer Personal Edition, un outil gratuit pour le développement d'applications mainframe IBM

  Micro Focus lance Enterprise Developer Personal Edition Un outil gratuit pour le développement d'applications mainframe IBM Micro Focus, l'éditeur de solutions de gestion, de test et de modernisation d'applications d'entreprise, vient de sortir son IDE gratuit Enterprise Developer Personal Edition destiné aux développeurs professionnels et aux étudiants en informatique pour les applications mainframe IBM. Il s'agit en fait de la version d'entrée de gamme, très facile à utiliser, de la solution complète Micro Focus Enterprise Developer. Elle s'intègre à Eclipse ou Visual Studio pour en faire des outils de développement d'applications mainframe distribuées. Cette éditi...

  Read the article

• Micro sound breaks/interrupts on Windows 7

  - by cand

  Hello all, I've been experiencing strange behavior recently. When listening to mp3 or watching movie or whatever that uses sound, I get micro breaks in sound. It's like it hangs or cuts a fragment for about 0.5s. When I start OS, it's ok, but as time passes it gets worse, to the extent that music is unlistenable being interrupted every 2 seconds. I haven't found any relevance between this behavior and hardware usage, I don't think it's directly related to HDD (or it might be but with significant delay). I have updated soundcard drivers and it didn't help a lot. My system is Windows 7, computer is simple HP laptop, nx7300-Ru374ES with WD Caviar Scorpio Blue hard drive inside and integrated soundcard on it (I can check the model later if it's important). Did anybody encounter such problem ? Maybe it's a common thing on Windows 7 or someone knows how to solve it? Thanks in advance.

  Read the article

• Do memory cards have any max file size limitation?

  - by Dmitriy R

  I am not sure where to ask this question, so perhaps it is physical limitation. I have a 8 GB flash micro SD memory card. When I copy any file size of up to few gigabytes, copying happens normally. But if I am trying to copy file over 4 GB file, then the system tells me like insufficient memory on card, although 8 GB is available. So perhaps only 32 bit address is used for keeping size of file in micro SD card, or is my micro SD defective?

  Read the article

• No image from graphics card but image from onboard video

  - by ReAzem

  I have an HD 5970 running on a P8Z68-v LE motherboard and I have no image comming out of the graphic card. When I plug my screen on my motherboard, I see the bios and the OS. When I plug my screen on the graphic card, I don't see anything. I know that the graphic card works because I have tested it on another computer. I know the motherboard works because I tested it with another graphic card and it worked. I know that the graphic card works with the computer because I have another computer with a P8Z68-LE and an HD 5970. I know it is not an OS issue because I should atleast be able to see the bios. I have tried unplugging my HDDs so that the OS dont interfere with anything. Using a 1000W power supply Using another HD5970 on the computer works. So this is a problem with my HD5970, but why is the graphic card working on my other computer?

  Read the article

• Which would be more reliable for data archival - SD card or a generic USB thumbdrive?

  - by Visitor

  I've been thinking lately what should I preferably use for data storage and archival. I will say in advance that I do not use flash memory as the only storage media - I also keep my data on the hard drives and optical disks - flash memory is but one of the several backup solutions that duplicate each other. For the flash memory however I do have a choice - to use a generic USB thumbdrive or a SD card. Are there any indications that SD cards may be better and more reliable? From browsing people's review on the web I see that many complaints about USB sticks have to do with them completely failing, losing file system and stop being recognized by the OS. At the same time, most of the complaints for SD cards deal with just write speeds not holding up to the promise - failure reports are but a portions of those for the USB sticks. Are SD cards indeed more reliable? Am I also correct in my assumptions that SD cards use higher grade NAND chips than USB thumbdrives? At least, for class 10 cards, because the specification dictates the minimum performance and the manufacturers have to preselect better chips. While it is common for USB sticks to promise high speeds "up to XX MB/sec" but the reality is they very often deliver speeds 2-3 times less than promised. Do SD cards get better NAND chips and USB thumbdrives receive the discarded chips? Any thoughts would be appreciated.

  Read the article

• Integrated video card not detected after installing new video card

  - by Jaime

  Hi, I got this emachines ET1331G-03W with a built in integrated video card (GeForce 6150SE). I added another video card (e-GeForece 6200 LE) in the hopes that I utilize both and have a dual monitor. But once the additional card was installed, windows 7 does not recognize the integrated video. Is it possible to use both video cards and have a dual monitor setup? Is there a switch on the motherboard that I have to turn on or off to enable the integrated video card along with the new card. Thanks!

  Read the article

• Microsoft Ergonomic 7000 keyboard + mouse lag

  - by user115210

  I recently bought a new Microsoft Ergonomic 7000 keyboard. I started to use it with my Ubuntu 12.04 and it lags all the time. I try to be more specific: Even on a minor CPU usage the mouse lags. By minor I mean firefox loading a webpage, or opening an application like conky, gnome-terminal etc. When higher CPU usage occurs the keyboard is lagging too, but by this I mean it misses my hits, so what I type won't appear later. What I tried so far (and did not work)? Disable autosuspend (echo -1 to sys/bus/usb.../autosuspend) and at the same place set level to "on". I have tried several video drivers: Vesa, radeon, newest catalyst (and catalyst beta too) When my keyboard and/or mouse lags I tried an other USB keyboard which works perfectly and the same for the mouse. I tried the keyboard and mouse on a different computer with Linux (Ubuntu, Arch, OpenSuse) too, the same problem appears but not on Windows. I tried to replace the battery sets, and to change channel on the dongle. And also tried to use the dongle from other USB ports. On the same time I am able to use any other wireless mouse. I changed the XkbModel to "microsoft7000" but it did not solve anything. About the hardware: AMD A8 3870K - Radeon HD6550D 8 GB of memory 4 GB of swap (which is almost never used) Here are my PC's details: lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 045e:071d Microsoft Corp. Bus 005 Device 002: ID 0461:4ea7 Primax Electronics, Ltd lspci: 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 12h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI BeaverCreek [Radeon HD 6550D] 00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [IDE mode] (rev 40) 00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] Hudson IDE Controller 00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] Hudson PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:15.0 PCI bridge: Advanced Micro Devices [AMD] Device 43a0 00:15.1 PCI bridge: Advanced Micro Devices [AMD] Device 43a1 00:16.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 11) 00:16.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 11) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -n 150: http://pastebin.com/sGUAAiUe cat /var/log/Xorg.0.log: http://pastebin.com/fny7ZkN4 Note: The Icon7 Twister Evolution is the replacement mouse to use.

  Read the article

• Installing Linux from External Card Reader

  - by Subhamoy Sengupta

  I have this problem. I was experimenting if I could use a memory card (SDHC) as an USB drive for all intents and purposes, and when I put the card in an USB card reader, I can use it just like regular USB stick and it also shows up in the BBS popup menu as an USB stick. When I tried to create an installation media out of it like this: sudo dd if=/path/to/image of=/dev/sdb And tried to boot from it, simply nothing happened. Cursor blinked a couple times, and jumped to the GRUB of my pre-existing GNU/Linux installation. What am I missing here? Is this not doable? I tried this with Xubuntu 12.04 and ArchLinux, by the way. I have also tried UNetBootIn instead of dd. Nothing happened differently.

  Read the article

• Graphics card artifacting

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

  Read the article

• VM using a secondary graphic card

  - by Arthur

  Hi everyone, at the moment i have a dual monitor setup on my main PCIe gfx card. I know that on windows it is almost impossible to have a second card (eg no thrills PCI card) running without having an SLI motherboard because of a driver issue. Well this was my conclusion after many weeks of research. I was thinking...is it possible to use a VM in order to utilize the secondary card as the default video output to feed another monitor? let me know if you want me to clarify Thanks :)

  Read the article

• Does this video card support sound?

  - by Macros

  Probably a rookie question but here goes...I am looking to buy a new video card for a few year old PC which will be used as a media centre. The card I am looking at is this one http://www.ebuyer.com/product/173708, with the main aim being to play blu-ray films. In the product description it states that the card has 7.1 audio channel support, does this mean it will play the sound from the blu-ray through the HDMI, or do I need a separate sound card?

  Read the article

• constantly crash on video card

  - by Jason Paddle

  I have this problem with my graphic-card(video card). Video card constantly crash because driver stopped. This is the massage that i get: Display driver stopped responding and has recovered. Display driver NVIDIA Windows Kernel Mode Driver , Version 285.62 stopped responding and has successfully recovered. Video card : MSI GTX470 Twin Frozr Motherboard:Asus P8Z68 V-Pro Tried reinstalling drivers but doesn't help. Any ideas what can be ?

  Read the article

• What are some of the benefits of a "Micro-ORM"?

  - by Wayne M

  I've been looking into the so-called "Micro ORMs" like Dapper and (to a lesser extent as it relies on .NET 4.0) Massive as these might be easier to implement at work than a full-blown ORM since our current system is highly reliant on stored procedures and would require significant refactoring to work with an ORM like NHibernate or EF. What is the benefit of using one of these over a full-featured ORM? It seems like just a thin layer around a database connection that still forces you to write raw SQL - perhaps I'm wrong but I was always told the reason for ORMs in the first place is so you didn't have to write SQL, it could be automatically generated; especially for multi-table joins and mapping relationships between tables which are a pain to do in pure SQL but trivial with an ORM. For instance, looking at an example of Dapper: var connection = new SqlConnection(); // setup here... var person = connection.Query<Person>("select * from people where PersonId = @personId", new { PersonId = 42 }); How is that any different than using a handrolled ADO.NET data layer, except that you don't have to write the command, set the parameters and I suppose map the entity back using a Builder. It looks like you could even use a stored procedure call as the SQL string. Are there other tangible benefits that I'm missing here where a Micro ORM makes sense to use? I'm not really seeing how it's saving anything over the "old" way of using ADO.NET except maybe a few lines of code - you still have to write to figure out what SQL you need to execute (which can get hairy) and you still have to map relationships between tables (the part that IMHO ORMs help the most with).

  Read the article

• Wireless not working on Dell Inspirion 1501 after upgrading to Ubuntu 12.04 tried steps in other threads

  - by mark burton

  I updated to Ubuntu 12.04 and now my wireless is not working. No icon for it. Tried some of the troubleshooting in other threads but can't get it to work. Would really appreciate any help Thanks! " *-network description: Network controller product: BCM4311 802.11a/b/g vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 02 serial: 00:19:b9:5c:d1:52 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=10.0.0.6 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff " lsub results Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver $ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS482 [Radeon Xpress 200M] 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g (rev 01) 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 08:01.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 01) rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• How do I prevent my filesystems from being mounted read-only after suspending?

  - by Chas. Owens

  I have Ubuntu 12.04 installed on an SDHC card (only one ext2 partition, no swap). When I suspend using pm-suspend, my root filesystem is mounted read-only. I am currently "fixing" this with the following file: /etc/pm/sleep.d/99_make_disk_rw: #!/bin/sh mount -o remount,rw / But the disk is marked as needing an fsck on reboot. How can I prevent the filesystem from being mounted read-only or whatever is going wrong here. Update: It looks like it is getting mounted read-only because an error occurred. I have changed the mount options for / in /etc/fstab to noatime,nodiratime,errors=continue and it no longer mounts the SDHC card as read-only after it resumes. So the problem is happening when it suspends, not when it resumes as I had thought. I checked /sys/bus/usb/devices/1-4/power/persist and it is set to 1. So the SDHC card shouldn't appear disconnected to the OS (or more accurately it should recover from the disconnection without error). Here seems to be the relevant section of the syslog Sep 10 10:34:23 iubit kernel: [ 748.246226] sd 4:0:0:0: [sdb] Media Changed Sep 10 10:34:23 iubit kernel: [ 748.246234] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Sep 10 10:34:23 iubit kernel: [ 748.246243] sd 4:0:0:0: [sdb] Sense Key : Unit Attention [current] Sep 10 10:34:23 iubit kernel: [ 748.246253] Info fld=0x0 Sep 10 10:34:23 iubit kernel: [ 748.246258] sd 4:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium may have changed Sep 10 10:34:23 iubit kernel: [ 748.246271] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 5d 3e f0 00 00 08 00 Sep 10 10:34:23 iubit kernel: [ 748.246291] end_request: I/O error, dev sdb, sector 6110960 Sep 10 10:34:23 iubit kernel: [ 748.247027] EXT2-fs (sdb1): error: ext2_fsync: detected IO error when writing metadata buffers Sep 10 10:34:23 iubit anacron[6954]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:23 iubit anacron[6954]: Normal exit (0 jobs run) Sep 10 10:34:24 iubit laptop-mode: Laptop mode Sep 10 10:34:24 iubit laptop-mode: enabled, not active Sep 10 10:34:24 iubit kernel: [ 749.055376] sd 4:0:0:0: [sdb] No Caching mode page present Sep 10 10:34:24 iubit kernel: [ 749.055387] sd 4:0:0:0: [sdb] Assuming drive cache: write through Sep 10 10:34:25 iubit anacron[7555]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:25 iubit anacron[7555]: Normal exit (0 jobs run) Sep 10 10:34:31 iubit kernel: [ 756.090861] EXT2-fs (sdb1): previous I/O error to superblock detected

  Read the article

• Unity Dash and top toolbar won't open after updating to 12.10

  - by pgrytdal

  Today, I updated to Ubuntu 12.10. After re-starting, like the updater suggested, the toolbar on the top of the screen, and the dash won't load. I seem to be missing other features, as well, like alttab to switch windows, etc. I am able to access the Terminal, by typing CtrlAltT, which is how I was bale to access Firefox. How do I fix this problem? Edit: 2:10 PM on 10/19/12 As Chris Carter suggested, I'm including the results of the teminal command lspci (Sorry... I dont know how to format between Back-tics): 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Acer Incorporated [ALI] AMD RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] 03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10) 09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• Downloading game assests to SD card on Android

  - by hgpc

  I'm developing an Android game that has to download some assets to the SD card to keep the size of the app as small as possible. I was thinking of using an uncompressed zip file to bundle all the assets. A requirement from the client is to protect these assets as much as possible. Being part of the apk is considered enough protection, but if I do this the apk size will be enormous. If I just put a zip bundle in the SD card, then anyone can unzip it and explore its contents. Is there a simple way to do this without retorting to horrid DRM? Obviously if someone really wants to check the resources of an Android game, they can. I'm just looking for a simple solution to avoid making this very easy.

  Read the article

• Booting From VIA VT6421A Based PCI SATA Card

  - by Priyan R

  I bought a VIA VT6421A based SATA card for an 845 chipset based motherboard. The card is working i can access sata hdd from windows/linux. The problem is i can't directly boot from the sata card. My motherboard is award bios 6 based. I tried first boot as SCSI, its not worked. There is no Raid Bios screen appeared from the card. On searching i found , Add VT6421A bios to system bios as pci addon bios. I did it using cbrom6 , successfully added VT6421A bios to the existing bios. But now on booting instead of raid bios system bios showed Warning : something like cannot load add on rom for vendor id xxxx device id xxx . Whats wrong ? As the card is VT6421A based and i added VT6421A bios got from VIA website.

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• video card for only watching videos

  - by Nothing 2 Lose

  I recently quit gaming so I took out my (GeForce GTX 550 Ti) video card and switched back to the (cheap) integrated card because I don't want the dedicated card using up power & making unnecessary heat/noise. But now I get lag when I watch high-res movies, or when I open several videos at the same time, but I don't want to go back to my (big/expensive) video card because that seems like overkill. What is the smallest/cheapest card which will only be good enough for watching videos without lagging ? (but not for gaming) PS. My CPU is: AMD Phenom 9850 Quad-Core Processor

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >