Search Results

Search found 1323 results on 53 pages for 'onboard vga'.

Page 4/53 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Onboard RAID vs Software RAID

    - by mvid
    My motherboard, an Asus M4a79t Deluxe, advertises RAID 0/1/5 capabilities. My limited understanding is that onboard RAID is better than software RAID. Is this necessarily true? Is an onboard RAID controller closer in performance to a software controller or a dedicated hardware controller?

    Read the article

  • Gigabyte Onboard graphics card heating up and then crashing

    - by this is text comes from a db
    5 minutes after I turn on my PC the onboard graphics card is usually over 80° celsius and then crashes (random colors on screen, only way to get out is to just plug out the pc). I haven't installed any new drivers or added/changed hardware recently Everything went fine until yesterday What should I do next? Do I have to buy a new mainboard right now? There is no fan on the onboard graphics card, only a heatsink.

    Read the article

  • kvm:vga driver vbempg cause blue screen in guest os Windows XP

    - by hellolwq
    I don't know if the problem was well know,I searched the google,but didn't get anything useful. I configed the KVM guest vga mode as vga std and got a yellow exclamation sign with the vga in the XP guest OS. so I found the vbempg.zip in the follow address: http://forum.ubuntu.org.cn/download/file.php?id=45928&sid=b394b9ca338fdca59a4174c5ee4dee26 Some often,I could get a blue screen crash.Any one could give some further information?

    Read the article

  • Why is the VGA Cable attached to new monitors

    - by ahsteele
    When opening a new monitor I am amazed that the VGA cable is always attached. Even with new high end monitors that include Display Port and DVI cables the old VGA cable is always attached while the others are just left in the box. What is the reasoning behind attaching a cable in the first place and why the VGA cable in particular?

    Read the article

  • DVI to VGA adapter only working in one output

    - by Tom Jenkinson
    I have a AMD Radeon HD 6800 Series graphics card which has 2 DVI outputs. I tried to set it up with 2 monitors which both have vga connectors on the end and used 2 dvi to vga adapters like these. http://www.tvcables.co.uk/images/items/vga-to-dvi.jpg For some reason nothing would reach the monitor, it would remain in standby, if it was plugged into the second output. I tried all the different combinations of cables, adapters and the 2 monitors but whichever monitor that was plugged into the second output wouldn't work. I then randomly decided to plug a different monitor into the second output which has a dvi connector on the end so there was no need for an adapter and plugged it in and it worked! Does anyone know why the second output on the graphics card won't work with a dvi to vga adapter (and the first output will)? I'm really confused! Thanks

    Read the article

  • Screen problems on 11.10 using VGA compatible controller 2nd Generation Core Processor Family Integrated Graphics Controller

    - by MorrisseyJ
    I am having problems with my display. The problem manifests as lots of screen artefacts, which seem to be worse in Unity than in Gnome 3, are worse after i have used suspend and are intolerable if i set myself up on a dual monitor. Specific issues include: icons disappearing, lines occurring all over the screen, the backgrounds of certain windows going another colour and window borders disappearing or being filled with text from other parts of the screen. The most annoying problem is lines of text disappearing from a host of word processing programmes (libreoffice, gedit, bluefish etc), as i type. In most circumstances the screen problem can be temporarily fixed (so that i can see the screen clearly) by either scrolling the text off the screen and then scrolling it back onto the screen, or highlighting the offending area of the desktop, by clicking and dragging. Errors on parts of the screen that don't seem to redraw (window borders (off the universal menu) or the screen area outside of a LO document, in print layout view, for example) can't seem to be fixed in a session. I am running 11.10, 64 bit on my Thinkpad x121e Display information is: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:4000(size=64) There appear to be a few problems with the Intel graphics and Ubuntu but i am not sure if they are all the same. If anyone knows if this is a known bug it'd be great to know, otherwise i'll file a report. Should anyone know of a fix i would greatly appreciate hearing about it. Let me know if you need any more information. Thanks

    Read the article

  • What determines what resolutions a laptop is willing to output over VGA?

    - by Joshua McKinnon
    I'm responsible for several conference rooms and have setup 1080p projectors and I provide both HDMI and VGA connectivity. HDMI for DisplayPort and Mini-DisplayPort, and VGA as a fallback, universal option. Contrary to what I expected, people seem to have much more trouble with the HDMI than VGA, so VGA gets used a lot more than you'd think (even as most workstation laptops made in the last 3-4 years have DisplayPort or Mini-DisplayPort...). Also to my surprise, VGA outputs over 1080p on a 50ft cable run with very minimal degradation on certain laptops - other laptops just don't offer 1080p as a resolution choice and top out at 1600x1200 or something else. Specific example: a ThinkPad W530 will do 1080p, a W520 won't, over VGA. (both do 1080p over displayport/mini-DP) What determines what resolutions a laptop is willing to output over VGA? I'm thinking this will come down to either a video driver that says it supports only certain resolutions for output, or limitations of the RAMDAC (which wouldn't be in play, at least DAC wise, on a digital output, but WOULD on VGA, an analog output). The basic reason for the question is that I noticed, say, a ThinkPad W520 with 1080p built in display, will output 1080p fine over DisplayPort to a 1080p projector, but will cap out at 1600x1200 (practically the same pixel count, just a little shy) on VGA. Now, this wouldn't be surprising at all except SOME laptops have no issue outputting 1080p over VGA, even with lower native resolutions. Why do I care? Well if there's some way I could enable it... for situations where my users end up using VGA anyway, it's preferable for display mirroring if they can output their laptop's native resolution, which, you guessed it, is very often 1080p on 15" models. DISCLAIMER: This is primarily a curiosity, I'm not claiming 1080p over VGA is ideal by any means, but hey, if it works. I've seen HDMI start artifacting more over same-length, same gauge cabling (up to 50' run in certain rooms). If you think this is better suited to SuperUser, please move it, but this is framed from an IT standpoint of something that affects a real pool of users in a multiple conference room, 50+ deployed laptop scenario.

    Read the article

  • Does anyone use 12.04 with HD 6950?

    - by Midori
    Back when I first tried to switch from Windows to Ubuntu (6-7 months ago) I had several graphics related problems. The VGA was overheating, graphic glitches, video playing issues, slow/choppy window movements etc. After 2-3 reinstalls, hours of playing with different drivers/settings I decided to return to Windows :\ Now I want to give it another shot. But before I start to format, partitioning, backup and other time consuming stuff I wanted to ask if anyone using the 12.04 with HD 6950. Can I utilize the full potential of it, or the drivers are still not good enough? I know that Linux isn't meant to play games in the first place, but the games I playing (SC2, BLC, HoN, DotA 2) are working with wine as far as I know (or aren't?) and I can't find any reason not to switch from Windows if I can utilize the full potential of my config in Ubuntu. So anyone who got experiences with this VGA in Ubuntu please reply. Thanks in advance :)

    Read the article

  • Secondary display showing Ubuntu logo, but is not detected

    - by user72873
    I recently installed Ubuntu using WUBI, and it worked perfectly. However, my laptop is showing the main desktop screen, and my secondary display is only showing the Ubuntu logo with its loading bar underneath, nothing more. When I go to 'displays' it is only detecting my laptop screen, and not my Asus monitor (connected with a vga). Things I've done so far: Unplug and replug vga cable. Reboot computer. Re-install Ubuntu. Checked to see if any drivers needed to be installed. None were needed. I have a Thinkpad W520, with a Nvidia Quadro 1000M Thanks for the help!

    Read the article

  • Using PCIe and onboard together

    - by dave
    I'm currently using my PCI Express card to run 2 monitors and my onboard to run another. It works fine despite people saying it won't. I use a gadget to monitor my PCI card but would also like to monitor my onboard GPU as well. I play a game called Eve Online and when I'm running my accts I can only get 20 fps. Before, when I was using just my PCI card, I was getting 60+. To solve this, I set the display options to interval immediate, it was set to one before. My computer handles it no problem at all, but I was always told this was immpossible. I was hoping someone could explain how and why this is working. Thanks! My setup is: i7 2600k 16 GB RAM XFX HD6970 2GB

    Read the article

  • ESXi onboard SATA passthrough [on hold]

    - by lodge93
    I am running ESXi 5.5 on a home system. When I attempt to pass one of the onboard SATA controllers (Intel ICH10R) to a VM, it is successful. However, the controller never appears in the VM. What else am I missing that would cause a VM to not recognize the controller? Additional Info: The controller is set to AHCI mode in the BIOS Prior to setting up the controller for passthrough, ESXi did recognize the controller and the drives I have tried with multiple VMs, none of which recognized the controller or the attached drives I have two onboard SATA controllers, on controller for ESXi and one for passthrough The final ideal state is that I could passthrough the controller to a FreeNAS VM

    Read the article

  • No sigal showing on LCD TV when Conects Leptop via VGA Cable [migrated]

    - by Amit Prajapati
    I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

    Read the article

  • No sigal showing on LCD TV when Conects Leptop via VGA Cable

    - by Amit Prajapati
    I am trying to connect my laptop to Samsung LCD TV by VGA TO HDMI cable My Laptop find Samsung tv on display setting. But When I press fn+F7 key my TV display No Signal My laptop specifications are: "Lenovo R61 ThinkPad, Model: 8935AE7 Window7 Ultimate 32 bits 2GB RAM VGA Port available No HDMI Port My TV specification are: Samsung LCD 26 HDMI Port available VGA Port Available I want to know what is problem? When I connect Another Dell Laptop (Window7 32 bit) with HDMI to HDMI cable it work properly. Thanks in Advance!

    Read the article

  • Using UIScreen to drive a VGA display - doesn't seem to show the UIWindow?

    - by Peter Hajas
    HI there, I'm trying to use UIScreen to drive a separate screen with the VGA dongle on my iPad. Here's what I've got in my root view controller's viewDidLoad: //Code to detect if an external display is connected to the iPad. NSLog(@"Number of screens: %d", [[UIScreen screens]count]); //Now, if there's an external screen, we need to find its modes, itereate through them and find the highest one. Once we have that mode, break out, and set the UIWindow. if([[UIScreen screens]count] > 1) //if there are more than 1 screens connected to the device { CGSize max; UIScreenMode *maxScreenMode; for(int i = 0; i < [[[[UIScreen screens] objectAtIndex:1] availableModes]count]; i++) { UIScreenMode *current = [[[[UIScreen screens]objectAtIndex:1]availableModes]objectAtIndex:i]; if(current.size.width > max.width); { max = current.size; maxScreenMode = current; } } //Now we have the highest mode. Turn the external display to use that mode. UIScreen *external = [[UIScreen screens] objectAtIndex:1]; external.currentMode = maxScreenMode; //Boom! Now the external display is set to the proper mode. We need to now set the screen of a new UIWindow to the external screen external_disp = [externalDisplay alloc]; external_disp.drawImage = drawViewController.drawImage; UIWindow *newwindow = [UIWindow alloc]; [newwindow addSubview:external_disp.view]; newwindow.screen = external; }

    Read the article

  • Which Ubuntu version to use on a MAXDATA laptop Eco 3100X ? with this system info

    - by Erjet Malaj
    i am speaking as new ubuntu user, i just have installed ubuntu 10.04 on my laptop, but is running very slow... So i am here to ask you a question: WHich ubuntu version can fit for my laptop MAXDATA Eco 3100x, . My Laptop System Information are: SYSTEM INFORMATION Running Ubuntu Linux, the Ubuntu 10.04 (lucid) release. GNOME: 2.30.2 (Ubuntu 2010-06-25) Kernel version: 2.6.32-40-generic (#87-Ubuntu SMP Mon Mar 5 20:26:31 UTC 2012) GCC: 4.4.3 (i486-linux-gnu) Xorg: unknown (25 February 2012 06:59:39AM) (25 February 2012 06:59:39AM) Hostname: lotus-laptop Uptime: 0 days 1 h 6 min CPU INFORMATION GenuineIntel, Intel(R) Pentium(R) 4 CPU 2.40GHz Number of CPUs: 1 CPU clock currently at 2390.561 MHz with 512 KB cache Numbering: family(15) model(2) stepping(7) Bogomips: 4781.12 Flags: fpu vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid MEMORY INFORMATION Total memory: 228 MB Total swap: 455 MB STORAGE INFORMATION SCSI device - scsi0 Vendor: ATA Model: IBM-DJSA-210 SCSI device - scsi1 Vendor: TOSHIBA Model: DVD-ROM SD-C2502 HARDWARE INFORMATION MOTHERBOARD Host bridge Silicon Integrated Systems [SiS] 650/M650 Host (rev 11) PCI bridge(s) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) USB controller(s) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10) Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20) ISA bridge Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 04) IDE interface Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master]) Subsystem: Silicon Integrated Systems [SiS] 5513 [IDE] GRAPHIC CARD VGA controller Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter Subsystem: Uniwill Computer Corp Device 5103 SOUND CARD Multimedia controller Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) Subsystem: Uniwill Computer Corp Device 5203 NETWORK Ethernet controller Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) Subsystem: Uniwill Computer Corp Device 5002 Modem Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) Subsystem: Uniwill Computer Corp Device 4003 Thanks you asap. :-) E

    Read the article

  • Dual displays not working - NVidia - Ubuntu 12.04 - Second Monitor - Two Screens

    - by user75105
    Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.04 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

    Read the article

  • Will the Driver Support for Intel HD Graphics be Improved in 12.10?

    - by Hiranya
    I recently installed Ubuntu 12.04 on a HP Pavilion dv4 laptop. This is a core i7 machine with Intel HD graphics and also a separate nVidia VGA card. I had a lot of issues getting Ubuntu 12.04 working on this system. First there were issues booting up the live CD for installation. I worked around that by using the 'nomodeset' option. Then I continued to have similar issues after installation has completed. So I had to permanently add the nomodeset option to my GRUB boot configuration. At the moment I have a working installation but there are many issues: Ubuntu GUI is a bit flaky at times. The mouse pointer goes on and off when hovering over certain icons. Certain things doesn't get rendered properly on the screen. I can't access any of the tty consoles. Hitting Ctrl+Alt+F[1-6] gives me a blank screen. And once that happens I can't even come back to the UI by hitting Ctrl+Alt+F7. I've realized that tty consoles are actually working. I just can't see the text. If I enter a command like 'sudo reboot' into the empty screen the machine reboots. Can't get external displays (monitors, projectors etc) working. But I think this is probably because the VGA out is wired to the nVidia card which is not being used by Linux. colord program crashes every now and then triggering a popup message. So my main question is, will the support for Intel HD graphics be improved in the next release? Or will I have to keep using the nomodeset option in the new release too? Also I appreciate if anybody can shed some light on any of the issues listed above. Thanks in advance.

    Read the article

  • Dual displays not working - NVidia - Ubuntu 12.4

    - by user75105
    Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

    Read the article

  • Over-scan Issues when using HDTV through VGA

    - by RPG Master
    Right now all we can do is set the TV to 1280x768 instead of its native resolution of 1360x768. Setting it to its native resolution gives you a screen with a large portion of the left side of the screen cut off. We've tried everything with the TV so now we're turning to the innards of Ubuntu in hopes of fixing this. The computer is using an NVIDIA GeForce GT240. This is its current xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin # HorizSync 28.0 - 55.0 # VertRefresh 43.0 - 72.0 Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-0" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 6600" EndSection Section "Screen" # Removed Option "metamodes" "1360x768 +0+0; 800x600 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1360x768 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Switching from Onboard intel to Nvidia Dedicated GPU

    - by Anarkie
    How can I switch from Intel onboard grpahics to Nvidia Dedicated GPU? When I go to windows screen resolution I see intel. I cant change it. I go to Device Manager, I see both Adapters are there and Nvidia is known.I disabled intel, I didnt see any option to set one as primary so I disabled intel, black screen!Reboot and re-enable intel. I right click on the desktop, choose "Nvidia Control Panel" and on 3D options I chose the desired game I want to play, High performance Nvidia, but it didnt switch when I started the game. Then I made preferred GPU in the global settings High performance Nvidia for everything it still didnt change.I understand to save the battery etc. there is a switch option between these two but I dont see this switch when it is necessary, I cant also switch manually?Is there a manual switch FN key?I looked but couldnt find. Why I want to do this? 1) Better game peformance. 2) I want to play an old game from 2002(Diablo 2 LOD), when I start the game there are black bars on the sides, so screen becomes just smaller which I dislike!I heard this is intel's specification to center the display.But instead I would like to scale or expand it to fit widescreen(fullscreen).Which should be possible with Nvidia. My Notebook Specs: Fujitsu Lifebook AH531, Win7 , 64 bit, i5, intel HD graphics onboard, Nvidia GT 525. I didnt install Nvidia later, it was always installed and ready from the moment I turned on the computer first time. How I determined that the cards werent switched when I am playing the game: with the windows key I exited from the game, then looked at screen resolutions menu, still saw intel, also the game was still with black bars.I know intel GPU should enough for Diablo 2 but I am interested in this answer for further games, I dont always play Diablo, what if I install an up to date game for example?Then Intel will not be sufficient.I would like to learn the switch option.

    Read the article

  • What is the best way to keep a VGA cable plugged into a laptop

    - by Ryan B
    I am looking for the best way to keep a VGA cable plugged into a laptop for an extended period of time. The laptop doesn't have the female end threads like you may see on a video card. Between the VGA port location and my hand size, I knock the cable out often. I am working on getting a docking station, but not sure when it would be ordered (work-related). I found an adapter, but not sure if it will work. Thanks

    Read the article

  • PCIe network card deactivate DVI output (but NOT VGA output) on Shuttle SG41J1+

    - by wazoox
    It's all in the title :) Inserting a network card (or any other PCIe card, RAID controller, SAS, etc ) in the PCIe 16x slot of the Shuttle SG41J1 deactivate the DVI output. The VGA output still works fine. Shuttle support says that it's a chipset limitation (G41 + ICH7), but that doesn't make sense to me : the VGA and DVI share the same hardware but the D/A converter stage. Does anyone think that there may be some solution to this conundrum? Can a future BIOS update solve the problem?

    Read the article

  • Does Asus F8SV supports 1920*1080 resolution through DVI output? [closed]

    - by Col
    Devices: Asus F8Sv Laptop (Windows 7 ultimate, GeForce 8600m GT, display driver is 301.42, detected and downloaded from nvidia.com, VGA and DVI output interface) Gateway 23 inches LCD monitor (VGA, DVI-D with HDCP, and HDMI input) 18 pins DVI cable, VGA cable, both new. Problems: When connect laptop to monitor by VGA, resolution is automatically adapted to 1920*1080; but when using DVI connection, resolution on monitor is fixed to 1024*768, which is lower than my laptop default 1280*800. The maximum resolution in windows control panel is only 1024*768, while the Nvidia control panel provides options 1920*1080p and 1920*1080i, but clicking apply button does not work, the resolution just can not change. Possibly reason I guess: GeForce 8600m GT does not support 1920*1080 resolution through DVI outputs. Can anyone confirm it or give the real reason? edit: Problem solved by buying a HDMI to DVI-D adapter. Using this adapter and a HDMI cable, I can now enjoy 1080p movie.

    Read the article

  • 13" MacBook Pro with Win 7 and External VGA gets 640x480

    - by Jim McKeeth
    I have a brand new 13" MacBook Pro - 2.26 GHz and the NVIDIA 9400M Video card. I installed Windows 7 (final) in boot camp and booted up to Windows 7. Installed all the drivers from the Apple disk and it was working great. Then I attached the external VGA adapter (from apple) to connect to a projector and it dropped down at 640x480 resolution. No matter what I did it wouldn't let me change to a higher resolution if the external VGA was connected. Once it disconnects then it goes back to the normal resolution. If I am booted into Snow Leopard it works fine. I tried updating the NVIDIA drivers and it behaved exactly the same. Ultimately I want to get 1024x768 or better resolution when connected to an external display. If it isn't fixable then I am curious if anyone else has seen this, if it is a known issue, and who to contact for support (Apple, Microsoft or NVIDIA?) Update: Just attaching the Mini-DVI to VGA adapter kicks it into 640x480, no projector is required. I tried forcing the display driver from Generic PnP Monitor to one that supported 1024x768 and that didn't work either.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >