Search Results

Search found 344 results on 14 pages for 'pinging'.

Page 4/14 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • I am unable to connect to my netbook from any machine on my network until the netbook has pinged it

    - by Samuel Husky
    I have a rather strange issue with my netbook on my local network. When trying to connect to it in any way from a remote system it does not appear to find it. However if I get the netbook to ping the machine trying to connect it mystically appears to work. Below is the ping test from my main PC to the netbook. C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Now a ping from the netbook to my main PC sam@malamute ~ $ ping 192.168.8.100 PING 192.168.8.100 (192.168.8.100) 56(84) bytes of data. 64 bytes from 192.168.8.100: icmp_req=1 ttl=128 time=2.46 ms 64 bytes from 192.168.8.100: icmp_req=2 ttl=128 time=0.835 ms 64 bytes from 192.168.8.100: icmp_req=3 ttl=128 time=1.60 ms 64 bytes from 192.168.8.100: icmp_req=4 ttl=128 time=1.32 ms 64 bytes from 192.168.8.100: icmp_req=5 ttl=128 time=1.34 ms ^C --- 192.168.8.100 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 0.835/1.514/2.460/0.536 ms And the same ping again from the main PC after the netbook has made a connection to it C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms The netbook is running Gentoo and is currently connected via wireless. My main PC is running Windows 7 however I get the same result no matter what PC I use on this network. Please see this example from a CentOS machine on the same network [root@tiger ~]# ping 192.168.8.102 PING 192.168.8.102 (192.168.8.102) 56(84) bytes of data. From 192.168.8.200 icmp_seq=2 Destination Host Unreachable From 192.168.8.200 icmp_seq=3 Destination Host Unreachable From 192.168.8.200 icmp_seq=4 Destination Host Unreachable --- 192.168.8.102 ping statistics --- 6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5000ms , pipe 3 If you need any more information or require logs or config files please let me know and any assistance is greatly appreciated. Additional info: No responses on TCP dump from the netbook. Same result when booting into Ubuntu from a USB key. No issue when using a wired Ethernet connection.

    Read the article

  • Service monitoring service, which I can ping instead of getting pinged

    - by Jack Juiceson
    I'm looking for a service, which can send me an alert if my program didn't ping(some http request) in X minutes. Pretty much like any service monitoring, but instead of service pinging my server I want, my program to ping the monitor service. This is because our program, can't get incoming connections, yet we need to monitor it's alive. And easiest for us will be to have a service we can ping. Thank you, - Jack

    Read the article

  • KeyPass - KeyPassHttp refuses to be recognised as a plugin

    - by wonea
    I'm trying to make KeyPass run on my Windows 7 machine, I've downloaded and installed KeePass, aim to use it alongside Passifox However, downloading and copying the KeePassHttp executable to the C:\Program Files (x86)\KeePass Password Safe folder, however it refuses to show up in the KeyPass plugins window. Please help, I've tried download KeePassHttp using multiple links from github and passifox itself using Firefox and even wget. Also I've tried pinging http://localhost:19455 but nothing was found. Any ideas I'm at a loss.

    Read the article

  • Manage computer from active directory manager

    - by Ripeed
    Within dsa.mac when I right-click on a computer and choose "Manage", it displays the following error message: Can't find path to computer \\computer.domain.tld. If I try ping computer.domain.tld, DNS translates it to an IP but the computer does not answer. It is right that ping does not answer? Pinging a computer that is not joined to the domain replies as expected. How can I correct this issue?

    Read the article

  • Loss of wireless network connectivity when playing video via HDMI cable

    - by Jeff Fohl
    Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas? EDIT: I am now leaning towards the possibility that the HDMI cable is somehow interfering with the wireless network, when large amounts of data are being pushed through the cable. Is this possible?

    Read the article

  • Tomato VPN connect but cannot ping LAN IP

    - by David Hamilton
    I've setup TomatoVPN using these settings on the server: TAP UDP 1194 Client address pool 10.10.9.1 -10.10.9.254 LAN clients are configured with 10.10.10.x I can connect from a remote client, but pinging anything in the 10.10.10.x results in a "Destination Host Unreachable" error. Here's my client configuration script: remote x.x.x.x 1194 client dev tap0 proto udp resolv-retry infinite nobind persist-key persist-tun float ca ca.crt cert client1.crt key client1.key ns-cert-type server Any suggestions as how I can make this properly bridge the two networks?

    Read the article

  • Error handling pppd configuration?

    - by Sebastian
    I have a computer, running ubuntu, that I want to be connected to the network at all times. It has a GSM modem connected to it via USB. Is there some program available that monitors that the networking is working (by pinging some site(s)), and if not tries to fix the error by reseting the modem, reloading the USB drivers and perhaps by dropping the USB port's current (if possible) to force the modem to reset ?

    Read the article

  • Can't solve DNS problem on windows XP machine

    - by persistence911
    I have a machine that can't access the server. I tried pinging the using the ip address of the server and it work great. But when I use the name to ping the server it gives a timeout. My nslookup cannot resolve the DNS servers but others in my company can. I am wondering is there something that can cause these behavior. I can access the internet though with their names. I am runiing on a xp SP2

    Read the article

  • 2010 Goals Review

    - by andyleonard
    Introduction Earlier this year, I responded to Tim Ford's ( Blog / Twitter ) tag (in a post about 2010 Resolutions and Themeword ) with 2010 Themeword and Goals . Let's see how I did. Resolutions 1. I need to take better care of Andy. On this, I failed. I took even worse care of myself than before. I have to address this in 2011. You can help by pinging me on Twitter ( @AndyLeonard ) every day in 2011 and ask me if I've exercised today. 2. I want to continue to serve the SQL Server community in several...(read more)

    Read the article

  • Why does flush dns often fail to work?

    - by Sharen Eayrs
    C:\Windows\system32>ipconfig /flushdns Windows IP Configuration Successfully flushed the DNS Resolver Cache. C:\Windows\system32>ping beautyadmired.com Pinging beautyadmired.com [xxx.45.62.2] with 32 bytes of data: Reply from xxx.45.62.2: bytes=32 time=253ms TTL=49 Reply from xxx.45.62.2: bytes=32 time=249ms TTL=49 Reply from xxx.45.62.2: bytes=32 time=242ms TTL=49 Reply from xxx.45.62.2: bytes=32 time=258ms TTL=49 Ping statistics for xxx.45.62.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 242ms, Maximum = 258ms, Average = 250ms My site should point to xx.73.42.27 I change the name server. It's been 3 hours. It still points to xxx.45.62.2 Actually what happen after we change name server anyway? Wait for what? I already flush dns. Why it still points to the wrong IP? Also most other people that do not have the DNS cache also still go to the wrong IP

    Read the article

  • Broadcom STA driver doesn't work well with BCM4313

    - by Oli
    Following on from my other question about our new Samsung Q330, I've noticed that the wireless is incredibly flakey. It can connect but after a little use, especially if it does a lot of downloading at once (read: install something from the Software Centre), the connection stops working. Network Manager still see the connection, there's just no network throughput. I've simple tests like pinging other local network hosts and they just fail. The Samsung Q330 has a Broadcom BCM4313 wifi card (it's proper ID: 14e4:4727) and it's running on the Broadcom STA drivers that Jockey suggests (it didn't work at all without this). I did try installing b43-fwcutter but this just didn't do anything. I was expecting a configuration screen to come up (to select a firmware) but it never did. This page suggests the newer brcm80211 driver might be able to help, but I don't know how to install that. If you think this is the right route, please let me know how one goes about installing it.

    Read the article

  • alternative to environment variables

    - by tonyl7126
    The amount of servers and the complexity of our application is growing and we now have servers in different regions (hosted on AWS). Certain database operations require low latency so we have stuck a database in each region (which is basically a user cache) to keep the network latency low. The way the application server currently knows which user cache/database to make its call to depends on an environemnt variable set in it. This has been working fine, but it seems hacky and not optimal. Is there any way for this to be done automatically? I was considering using a package like fping and pinging each database when the app server reloads (or caching it the first time) and using the corresponding latencies to decide which database has the lowest latency for each app server. Not sure if this is the best idea though.

    Read the article

  • Slow on browsing web, but normal when using apt-get

    - by Arif Setyawan
    I have a problem with my fresh instalation of Ubuntu 11.10. The problem happen when i start up my browser and accessing website such google, askubuntu.com, facebook and other sites. frustate on the situation i try watch the progress in system monitor. the result from monitor shows that there is no data transfer when i try to accessing the page. firstly, i assume that it is the trouble from my ISP or my home connection. But it is not. When i try pinging google it shows transaction between my computer and the network but still null from browser. Then i tried to test the aptitude and it was work fine but still the browser won't recieve any packet from the internet. Here is the detail of my tools : Laptop : Toshiba Satellite e205 (network card atheros) Operating System : Ubuntu 11.04 dual booted with Win7 Browser : Mozilla Firefox comes up with the Ubuntu 11.10 installation Chrome : Last version (just yesterday install it) Thank You before :) [this question posted via win]

    Read the article

  • Internet keep dropping in Ubuntu 12.04

    - by Kokuryuu
    I am having an issue with my Ubuntu, I keep getting "server not found" errors when I try to go online, I have tried pinging my DNS and Goggle, and it seems like no packets are dropped, but still my Internet is not working Also my other PCs in the house have working Internet connection. I am sure there is no firewall active here, also nothing on my router is blocking, and I checked cables. I have no issues in the same PC in Windows. It is only in Ubuntu. Any ideas?

    Read the article

  • Connection timed out when connecting to a website (ubuntu only)

    - by S.C.
    I've been struggling with these problem for months. It happens randomly and it happens on Ubuntu only (12.04). It's about my hosted company website. Some facts: I can ping it I can traceroute it I can dig it I can make a nslookup But whenever I try to open it in Chrome it won't open. I also tried using polipo but got same connection time out issue. I'm connected through a LAN network and I'm experiencing no problem with any other website. Is there a more accurate debugging technique I'm missing other than pinging/tracerouting, etc.?

    Read the article

  • My Herokuapp is inaccessible from custom domain name

    - by picardo
    I have a Heroku app that is located at myapp.herokuapp.com. I have mapped a domain name to this app, using the A properties. I followed the instructions on Heroku's website to the letter, and it worked for a few days. Now when I try to access the site from the custom domain, it's timing out! On Chrome, I am getting "Oops! Google Chrome could not find that page!" message. I tried pinging the name as well, but I got this error: ping: cannot resolve yourhostname.org: Unknown host The app itself is working and I don't see any error messages from Heroku. Or from new Relic. What's going on here? Also tried running host and this was the error message: ;; connection timed out; no servers could be reached

    Read the article

  • Estimating file transfer time over network?

    - by rocko
    I am transferring file from one server to another. So, to estimate the time it would take to transfer some GB's of file over the network, I am pinging to that IP and taking the average time. For ex: i ping to 172.26.26.36 I get the average round trip time to be x ms, since ping send 32 bytes of data each time. I estimate speed of network to be 2*32*8(bits)/x = y Mbps -- multiplication with 2 because its average round trip time. So transferring 5GB of data will take 5000/y seconds Am I correct in my method of estimating time. If you find any mistake or any other good method please share.

    Read the article

  • SSH connection times out

    - by mark
    Given: vm - a WinXPsp3 virtual machine hosted by a Win7sp1 physical machine alice is the user on vm srv - a Win2008R2sp1 server bob is the user on srv quake - a linux server mark is the user on quake Both vm and srv have the same new installation of cygwin (1.7.9) and openssh. Firewall service is disabled on vm (and its host) and on srv All the machines can be pinged from all the machines. ssh mark@quake works OK from both vm and srv. ssh bob@srv works OK from both quake and vm. ssh alice@vm works on the vm itself only, but it fails on the other two machines: alice@vm ~ $ ssh alice@vm alice@vm's password: Last login: Tue Oct 25 23:42:09 2011 from vm.shunra.net [mark@Quake ~]$ ssh -vvv alice@vm OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out bob@Srv ~ $ ssh -vvv alice@vm OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Connecting to vm [172.30.2.60] port 22. debug1: connect to address 172.30.2.60 port 22: Connection timed out ssh: connect to host vm port 22: Connection timed out I used ssh-host-config both on vm and srv to configure the ssh to run as a windows service. Besides that I did nothing else. Can anyone help me troubleshoot this issue? Thank you very much. EDIT The virtual machine software is VMWare Workstation 7.1.4. I think the problem is in its settings, but I have no idea where exactly. The Network Adapter is set to Bridged. EDIT2 All the machines are located in the company lab, I think all of them are on the same segment, but I may be wrong. Below is the ipconfig /all output for each machine (skipping the linux server). I have deleted the Tunnel adapters to keep the output minimal. If anyone thinks they matter, do tell so and I will post them as well. In addition ping output is given to show that DNS is correct. Something else, may be relevant, may be not. Doing psexec to srv works OK, whereas to vm failes with Access Denied. srv: C:\Windows\system32>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : srv Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) Physical Address. . . . . . . . . : E4-1F-13-6D-F3-00 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 172.30.6.9(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Windows\system32>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time=1ms TTL=128 Reply from 172.30.2.60: bytes=32 time=4ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 4ms, Average = 1ms C:\Windows\system32> vm: C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net shunranet Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : shunranet Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter Physical Address. . . . . . . . . : 00-0C-29-8F-A0-0B Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 172.30.2.60 Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCP Server . . . . . . . . . . . : 172.30.1.1 DNS Servers . . . . . . . . . . . : 172.30.1.1 172.30.1.2 Lease Obtained. . . . . . . . . . : Tuesday, October 25, 2011 18:16:34 Lease Expires . . . . . . . . . . : Wednesday, November 02, 2011 18:16:34 C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time=1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\> vm-host (the host machine of the vm): C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : vm-host Primary Dns Suffix . . . . . . . : shunra.net Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : shunra.net Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) Physical Address. . . . . . . . . : 6C-F0-49-E7-E9-30 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f59d:7f6e:1510:6f%10(Preferred) IPv4 Address. . . . . . . . . . . : 172.30.6.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 172.30.0.254 DHCPv6 IAID . . . . . . . . . . . : 242020425 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : 172.30.1.1 194.90.1.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd92:38c0:9a6d:c008%16(Preferred) Autoconfiguration IPv4 Address. . : 169.254.192.8(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352342102 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::edb9:b78c:a504:593b%17(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.5.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 369119318 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-CC-39-80-6C-F0-49-E7-E9-30 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\>ping srv Pinging srv.shunra.net [172.30.6.9] with 32 bytes of data: Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Reply from 172.30.6.9: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.6.9: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping vm Pinging vm.shunra.net [172.30.2.60] with 32 bytes of data: Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Reply from 172.30.2.60: bytes=32 time<1ms TTL=128 Ping statistics for 172.30.2.60: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\> EDIT3 I have just checked - the vm-host is able to ssh to the vm machine! I still do not know how to leverage this discovery to solve the problem.

    Read the article

  • Request time out error

    - by Neo
    Hi Today i came across strange problem whenever i try to pinging to my server works properly but whenever i send http request from browser the request time out happens. can anybody help me to resolve this issue.

    Read the article

  • simplest way to confirm payment via PayPal?

    - by Giles Bowkett
    Hi - what's the best way to simply get feedback from PayPal to confirm that your customer paid? It looks as if the answer is IPN - if so, my followup question is, can I enable IPN for only specific buttons? I don't want PayPal pinging my IPN listener for purchases that don't require any kind of IPN integration. I'm all about Agile and YAGNI, I don't want to do ANYTHING unnecessary.

    Read the article

  • Ajax doesn't trigger a change-event on a webkit based browser

    - by user319464
    I have adapted a Jquery plugin to for-fill my needs to send GET requests to servers as a way of "pinging" them. I've also added some javascript code to add some fancy features like: depending on the changed value in a that the Jquery plugin changes, it changes the Icon accordingly. To make it all work essentially, I made so that when Ajax gets a "complete" event, it forces a "onChange" event to the span, triggering the javascript validation function to change the status icons. Here is the code of my slightly modified jQuery Plugin: /** * ping for jQuery * * Adapted by Carroarmato0 (to actually work instead of randomly "pinging" nowhere instead of faking * * @auth Jessica * @link http://www.skiyo.cn/demo/jquery.ping/ * */ (function($) { $.fn.ping = function(options) { var opts = $.extend({}, $.fn.ping.defaults, options); return this.each(function() { var ping, requestTime, responseTime ; var target = $(this); var server = target.html(); target.html('<img src="img/loading.gif" alt="loading" />'); function ping() { $.ajax({url: 'http://' + server, type: 'GET', dataType: 'html', timeout: 30000, beforeSend : function() { requestTime = new Date().getTime(); }, complete : function() { responseTime = new Date().getTime(); ping = Math.abs(requestTime - responseTime); if (ping > 2000) { target.text('niet bereikbaar'); } else { target.text(ping + opts.unit); } target.change(); } }); } ping(); opts.interval != 0 && setInterval(ping,opts.interval * 1000); }); }; $.fn.ping.defaults = { interval: 3, unit: 'ms' }; })(jQuery); target.change(); is the code that triggers the "onchange" event in the span: echo " <td class=\"center\"><span id=\"ping$pingNb\" onChange=\"checkServerIcon(this)\" >" .$server['IP'] . "</span></td>"; In Firefox this works, checkServerIcon(this) gets executed and passes the span object to the function. function checkServerIcon(object) { var delayText = object.innerHTML; var delay = delayText.substring(0, delayText.length - 2); if ( isInteger(delay) ) { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/enable_server.png'; } else { if (delay == "bezig.") { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/search_server.png'; } else { object.parentNode.previousSibling.parentNode.getElementsByTagName('img')[0].src = 'img/servers/desable_server.png'; } } } My guess would be that there's something different in WebKit browsers in the way object.parentNode.previousSibling.parentNode. .... works...

    Read the article

  • Execute a command using php under ssh2 in php

    - by Mervyn
    Using Mint terminal my script connects using ssh2_connect and ssh2_auth-password. When am logged in successfully I want to run a command which will give me the hardware cpu. Is there a way I can use to exec the command in my script then show the results. I have used system and exec for pinging. if i was in the terminal i do the login. then type "get hardware cpu" in the terminal it would look like this: Test~ $ get hardware cpu

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >