Search Results

Search found 127 results on 6 pages for 'vain fellowman'.

Page 4/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• External hard drive issue

  - by Blind Fish

  I am running Ubuntu 12.04 and I have a 500GB external hard drive, formatted in ext4, which I have used for about a year to store batches of data that I am sifting through. About once a week I move a chunk of data from the external drive to my internal drive for processing. As I do that I delete the data from the external drive and empty the trash, thereby clearing up space on the external and also preventing myself from grabbing stuff that I've already sorted through. The vast majority of this is text files, but there are a few .jpegs and .mp4s thrown in, if that matters. Anyway, this has been working without a hitch for nearly a year. So today I plug in the drive and I have an odd issue. I was able to move folders from the external over to my internal drive with no problem, but when I tried to delete those files I was unable to do so. I kept getting the "unable to send file to trash, do you wish to delete permanently?" message. I clicked yes / delete all, but no files were actually deleted. It just sat there. Even worse, while the system was trying in vain to delete those files I was unable to move more files over. In short, I was stuck. I canceled the operation, unmounted and remounted the drive, and then I had an even bigger problem. I have a spreadsheet of all the different folders on there ( exactly 818 ) and yet when I opened the drive in Nautilus, it was only finding 512 folders. So I had 306 missing folders, but my free space was unchanged. Immediately I think that the drive may be corrupted. I went into Disk Utility and ran the check disk option. It said that the drive was NOT clean, but offered no remedy or option to repair. I went back into the drive in Nautilus and once again attempted to delete the files I had already moved. Same issue. I clicked on Details and it said that it was unable to create a trashing file I/O error. I've looked, and it's not a permissions issue. The drive and all folders that are in it all belong to me, and they are all read / write. I've started running badblocks on the drive, but it looks like that is going to take several hours to complete. Any ideas?

  Read the article

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• corrupted, hidden, wireless network adapter from "Network Connections" in Windows 7

  - by srihari reddy

  The issue is that when I install a wireless network adapter on my Windows 7 Professional machine I have no connectivity, the system tray icon has a red X. First, I tried the obvious, install updated drivers from the manufacturer. When I did this, the Network Connections icon had gray bars and there was no connectivity. So I tried installling the network adapter on a different computer on the same network and I verified that it does work with no issues. Next, I ran scan disk with no issues. Next, I ran sfc as admin with no issues. At this point I turned to the router and turned SSID broadcast on but that didn't help. I turned MAC address filtering off at the router but that didn't help. Whenever I installed the original network adapter (a wireless N usb adapter with WPA2 TKIP+AES) it showed up as "Wireless Network Connection 2" with a grayed out icon and no connectivity. Lastly, I tried installing two different "verified working" usb wireless adapters on to the Windows 7 Pro machine. The results were the same "Wireless Network Connection 2" that had a green bar icon but no connectivity. I installed the manufacturers software and it indicated the NIC was not there even thought the driver installed successfully in Device Manager. I guess I should mention, I first tried (insanely in vain) to use the (worthless) Windows Network troubleshooter. The results were....drumroll please... There is a problem with the network adapter... well No Duh! Also, during all of this the network adapter is always showing as "Working Properly" in the properties dialogue of Device Manager for the wireless NIC. I checked for hidden devices in Device Manager but there were none. Here is my fundamental question that I've tried to find in the Windows 7 support center with no luck. How do I remove/delete/uninstall network adapters from the Windows 7 registry? in particular hidden, corrupted network adapters, that used to be working.

  Read the article

• How do I get netcat to accept connections from outside the LAN?

  - by Chris

  I'm using netcat as a backend to shovel data back and forth for a program I'm making. I tested my program on the local network, and once it worked I thought it would be a matter of simply forwarding a port from my router to have my program work over the internet. Alas! This seems not to be the case. If I start netcat listening on port 6666 with: nc -vv -l -p 6666, then go to 127.0.0.1:6666 in a browser, as expected I see a HTTP GET request come through netcat (and my browser sits waiting in vain). If I go to my.external.ip.address:6666, however, nothing comes through at all and the browser displays 'could not connect to my.external.ip.address:6666'. I know that the port is correctly forwarded, as www.canyouseeme.org says port 6666 is open (and when netcat is not listening, that its closed). If I run netcat with -g my.adslmodem's.local.address to set the gateway address, I get the same behavior. Am I using this command line option correctly? Any insight as to what I'm doing wrong?

  Read the article

• Resolving a BSOD/CPU/GPU issue...

  - by Christian Sciberras

  Hello all, I'm getting a BSOD / system crash (sometimes the PC just quits without a BSOD). Hardware Specifications cpu: i7 920 2666MHz / 8 cores (not OCed afaik) mobo: Asus P6T SE ram: 2x Corsair CM3X2G1333C9 (64bit DDR3 667MHz) gfx: ATI Radeon HD 5970 1GB (XFX HD5970 BE) os: Windows 7 Ultimate 64 bit (legit) All bios, firmware and drivers are all up to date (as of today). Symptoms Sometimes the PC runs smoothly, sometimes I get this BSOD. The BSOD always happens when I'm doing something related to graphics, such as viewing a video or playing a game. I get to know about the imminent BSOD ~10 seconds earlier; the PC starts freezing occasionally but increasing in frequency and length of lag (I noticed processor usage in creased from Process Monitor). I've tweaked BIOS settings occasionally but afaik, it was in vain. A day or so ago, I reset it to factory settings. BSOD contents The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000019, 0x0000000000000000, 0xfffff88001f35180, 0x0000000000000004). 15-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 4 23-12-2010 A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Internal Timer Error Processor ID: 2 Important The interesting thing is that although the event log (and BSOD screen) blame a "secondary processor", Windows Action Center sometimes blamed the GFX driver (for the same error). Also It is interesting to note that after hibernating my PC, I always get the BSOD.

  Read the article

• port forwarding problem

  - by Claudiu

  I want to set up an svn server on my computer, so it's available from anywhere. I think I set up the repository correctly, using CollabSVN. If I go to Repo-Browser with TortoiseSVN and point it to svn://localhost:3690, it shows the proper repository. The problem now is that I'm behind a router. My local IP is 192.168.1.45 . Doing svn://192.168.1.45:3690 also works. My global IP is, say, x.x.x.x. Just doing svn://x.x.x.x:3690 doesn't work, which makes sense, since I have to set up port forwarding. I'm using a Verizon router. Using their web interface (on 192.168.1.1) I added the following port forwarding rule: IP Address forward to: 192.168.1.45 Source Ports: Any Dest Ports: 3690 Forward to: 3690 Protocol: TCP However, even after applying this rule, going to svn://x.x.x.x:3690 doesn't work. It takes a few seconds to fail, then says that the connection couldn't be established because the server connected to didn't respond properly after a period of time. What's interesting is that a random port, like svn://x.x.x.x:36904 fails immediately, saying that the target machine actively refused the connection. So I figure that the forwarding rule did something, but not fully what was necessary. Any ideas on how to get this working? The router model is MI424-WR and the firmware version is 4.0.16.1.56.0.10.12.3. UPDATE: I also tried setting destination port to 45000, and still forwarding to 3690, in case something was wrong w/ the lower-numbered ports, but to no avail. I also tried port 80 to port 3690, still all in vain.

  Read the article

• SFTP access without hassle

  - by enobayram

  I'm trying to provide access to a local folder for someone over the internet. After googling around a bit, I've come to the conclusion that SFTP is the safest thing to expose through the firewall to the chaotic and evil world of the Internet. I'm planning to use the openssh-server to this end. Even though I trust that openssh will stop a random attacker, I'm not so sure about the security of my computer once someone is connected through ssh. In particular, even if I don't give that person's user account any privileges whatsoever, he might just be able to "su" to, say, "nobody". And since I was never worried about such things before, I might have given some moderate privileges to nobody at some point (not sudo rights surely!). I would of course value your comments about giving privileges to nobody in the first place, but that's not the point, really. My aim is to give SFTP access to someone in such a sandboxed state that I shouldn't need to worry about such things (at least not more so than I should have done before). Is this really possible? Am I speaking nonsense or worried in vain?

  Read the article

• Cant ping ip on LAN. Port forward works fine though.

  - by Anoop

  I have a Solaris 11 machine running inside the LAN. It is a default install. I can access the machine and ping it if I ssh into my router (if it matters, it is running dd-wrt). I cannot ping the Solaris machine using ip address from any other machine inside the LAN. But if I setup port forwarding everything works perfectly fine. I can also use the port forward from outside the LAN (from my office) - which is good and how I want it to be. I can SSH and ping and do pretty much everything else from outside as well as inside but only as long as I have the port forwarded from my router. Why would I not be able to ping or ssh or even access the Solaris 11 machine from within the LAN - I have checked and couldn't find any firewall running on the Solaris 11 box. I even tried disabling every known firewall on the router (dd-wrt, it had something like SPI firewall running). I even tried setting a static IP for my Solaris box but all in vain! Please help me understand how and why this happens!! Thanks.

  Read the article

• apache chokes after 300 connections

  - by john titus

  We have an apache webserver in front of Tomcat hosted on EC2, instance type is extra large with 34GB memory. Our application deals with lot of external webservices and we have a very lousy external webservice which takes almost 300 seconds to respond to requests during peak hours. During peak hours the server chokes at just about 300 httpd processes. ps -ef | grep httpd | wc -l =300 I have googled and found numerous suggestions but nothing seems to work.. following are some configuration i have done which are directly taken from online resources. I have increased the limits of max connection and max clients in both apache and tomcat. here are the configuration details: //apache <IfModule prefork.c> StartServers 100 MinSpareServers 10 MaxSpareServers 10 ServerLimit 50000 MaxClients 50000 MaxRequestsPerChild 2000 </IfModule> //tomcat <Connector port="8080" protocol="org.apache.coyote.http11.Http11NioProtocol" connectionTimeout="600000" redirectPort="8443" enableLookups="false" maxThreads="1500" compressableMimeType="text/html,text/xml,text/plain,text/css,application/x-javascript,text/vnd.wap.wml,text/vnd.wap.wmlscript,application/xhtml+xml,application/xml-dtd,application/xslt+xml" compression="on"/> //Sysctl.conf net.ipv4.tcp_tw_reuse=1 net.ipv4.tcp_tw_recycle=1 fs.file-max = 5049800 vm.min_free_kbytes = 204800 vm.page-cluster = 20 vm.swappiness = 90 net.ipv4.tcp_rfc1337=1 net.ipv4.tcp_max_orphans = 65536 net.ipv4.ip_local_port_range = 5000 65000 net.core.somaxconn = 1024 I have been trying numerous suggestions but in vain.. how to fix this? I'm sure m2xlarge server should serve more requests than 300, probably i might be going wrong with my configuration.. The server chokes only during peak hours and when there are 300 concurrent requests waiting for the [300 second delayed] webservice to respond. Please help..

  Read the article

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• PHP, javascript, single quote problems with IE when passing variable from ajax post to javascript fu

  - by Mattis

  Hi! I have been trying to get this to work for a while, and I suspect there's an easy solution that I just can't find. My head feels like jelly and I would really appreciate any help. My main page.php makes a .post() to backend.php and fetches a list of cities which it echoes in the form of: <li onclick="script('$data');">$data</li> The list is fetched and put onto the page via .html(). My problem occurs when $data has a single quote in it. backend.php passes the variable just fine to page.php but when i run html() it throws a javascript error (in IE, not FF obviously); ')' is expected IE parses the single quote and messes up the script()-call. I've been trying to rebuild the echoed string in different ways, escaping the 's on the php side and/or on the javascript side - but in vain. Do I have to review the script in total? page.php $.post("backend.php", {q: ""+str+""}, function(data) { if(data.length >0) { $('#results').html(data); } backend.php while ($row = $q->fetch()) { $city = $row['City']; // $city = addslashes($row['City']); // $city = str_replace("'","&#39;",$row['City']); echo "<li onclick=\"script('$city');\">".$city."</li>"; }

  Read the article

• "Pretty" Continuous Integration for Python

  - by dbr

  This is a slightly.. vain question, but BuildBot's output isn't particularly nice to look at.. For example, compared to.. phpUnderControl Hudson CruiseControl.rb ..and others, BuildBot looks rather.. archaic I'm currently playing with Hudson, but it is very Java-centric (although with this guide, I found it easier to setup than BuildBot, and produced more info) Basically: is there any Continuous Integration systems aimed at python, that produce lots of shiney graphs and the likes? Update: After trying a few alternatives, I think I'll stick with Hudson. Integrity was nice and simple, but quite limited. I think Buildbot is better suited to having numerous build-slaves, rather than everything running on a single machine like I was using it. Setting Hudson up for a Python project was pretty simple: Download Hudson from https://hudson.dev.java.net/ Run it with java -jar hudson.war Open the web interface on the default address of http://localhost:8080 Go to Manage Hudson, Plugins, click "Update" or similar Install the Git plugin (I had to set the git path in the Hudson global preferences) Create a new project, enter the repository, SCM polling intervals and so on Install nosetests via easy_install if it's not already In the a build step, add nosetests --with-xunit --verbose Check "Publish JUnit test result report" and set "Test report XMLs" to **/nosetests.xml That's all that's required. You can setup email notifications, and the plugins are worth a look. A few I'm currently using for Python projects: SLOCCount plugin to count lines of code (and graph it!) - you need to install sloccount separately Violations to parse the PyLint output (you can setup warning thresholds, graph the number of violations over each build) Cobertura can parse the coverage.py output. Nosetest can gather coverage while running your tests, using nosetests --with-coverage (this writes the output to **/coverage.xml)

  Read the article

• Custom view in iPhone SDK gets placed incorrectly in realation to statusbar

  - by markqvist

  (ragh, i'm apparently not allowed to post images, so i have included links to the images in this post instead of embedding them) Im writing an iPhone application based on the navigation controller template, but I am not loading the actual navigation controller as the first view in the window. I create a new view controller from a xib, and then add that as a subview, and then only push the navigation view as a modal when i need it. Here's my application: didFinishLaunching ... method in the application deleate RootViewController *rootViewController = (RootViewController *)[navigationController topViewController]; rootViewController.managedObjectContext = self.managedObjectContext; mainViewController = [[MainViewController alloc] initWithNibName:@"MainViewController" bundle:[NSBundle mainBundle]]; mainViewController.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal; [window addSubview:[mainViewController view]]; [[mainViewController view] setNeedsLayout]; [window makeKeyAndVisible]; return YES; It works but the view is not properly aligned with the statusbar: http://img.exdev.dk/1.png When i click "my ambiances" and push the navigation controller view, and then dismiss it again, the layout is fine: same link as above, just replace the 1 with a 2. Sorry for the hassle, apparently I can also only post one link.... Here's the code I use for presenting/dismissing the navigationcontroller: -(void)pushMyAmbiences { [mainViewController presentModalViewController:navigationController animated:TRUE]; } -(void)returnToMainView { [mainViewController dismissModalViewControllerAnimated:TRUE]; } Is there anything I'm missing here? Layout-wise? Something that needs to be set in the xib? In a vain attempt I tried calling setNeedsLayout on the view, no luck. Any help is greatly appreciated!

  Read the article

• How do I get netcat to accept connections from outside the LAN?

  - by Chris

  I'm using netcat as a backend to shovel data back and forth for a program I'm making. I tested my program on the local network, and once it worked I thought it would be a matter of simply forwarding a port from my router to have my program work over the internet. Alas! This seems not to be the case. If I start netcat listening on port 6666 with: nc -vv -l -p 6666, then go to 127.0.0.1:6666 in a browser, as expected I see a HTTP GET request come through netcat (and my browser sits waiting in vain). If I go to my.external.ip.address:6666, however, nothing comes through at all and the browser displays 'could not connect to my.external.ip.address:6666'. I know that the port is correctly forwarded, as www.canyouseeme.org says port 6666 is open (and when netcat is not listening, that its closed). If I run netcat with -g my.adslmodem's.local.address to set the gateway address, I get the same behavior. Am I using this command line option correctly? Any insight as to what I'm doing wrong?

  Read the article

• jQuery HOW TO?? pass additional parameters to success callback for $.ajax call ?

  - by dotnetgeek

  Hello jQuery Ninjas! I am trying, in vain it seems, to be able to pass additional parameters back to the success callback method that I have created for a successful ajax call. A little background. I have a page with a number of dynamically created textbox / selectbox pairs. Each pair having a dynamically assigned unique name such as name="unique-pair-1_txt-url" and name="unique-pair-1_selectBox" then the second pair has the same but the prefix is different. In an effort to reuse code, I have crafted the callback to take the data and a reference to the selectbox. However when the callback is fired the reference to the selectbox comes back as 'undefined'. I read here that it should be doable. I have even tried taking advantage of the 'context' option but still nothing. Here is the script block that I am trying to use: <script type="text/javascript" language="javascript"> $j = jQuery.noConflict(); function getImages(urlValue, selectBox) { $j.ajax({ type: "GET", url: $j(urlValue).val(), dataType: "jsonp", context: selectBox, success:function(data){ loadImagesInSelect(data, $j(this)) } , error:function (xhr, ajaxOptions, thrownError) { alert(xhr.status); alert(thrownError); } }); } function loadImagesInSelect(data, selectBox) { //var select = $j('[name=single_input.<?cs var:op_unique_name ?>.selImageList]'); var select = selectBox; select.empty(); $j(data).each(function() { var theValue = $j(this)[0]["@value"]; var theId = $j(this)[0]["@name"]; select.append("<option value='" + theId + "'>" + theValue + "</option>"); }); select.children(":first").attr("selected", true); } From what I have read, I feel I am close but I just cant put my finger on the missing link. Please help in your typical ninja stealthy ways. TIA

  Read the article

• Find position of a node within a nodeset using xpath

  - by Phil Nash

  After playing around with position() in vain I was googling around for a solution and arrived at this older stackoverflow question which almost describes my problem. The difference is that the nodeset I want the position within is dynamic, rather than a contiguous section of the document. To illustrate I'll modify the example from the linked question to match my requirements. Note that each <b> element is within a different <a> element. This is the critical bit. <root <a <bzyx</b </a <a <bwvu</b </a <a <btsr</b </a <a <bqpo</b </a </root Now if I queried, using XPath for a/b I'd get a nodeset of the four <b> nodes. I want to then find the position within that nodeset of the node that contains the string 'tsr'. The solution in the other post breaks down here: count(a/b[.='tsr']/preceding-sibling::*)+1 returns 1 because preceding-sibling is navigating the document rather than the context node-set. Is it possible to work within the context nodeset?

  Read the article

• Getting content from PHP: Trouble with POST and query.

  - by vgm64

  Apologies for my longest question on SO ever. I'm trying to interface with a php frontend for a mysql database in ROOT (a CERN framework in C++ for high energy physics analysis). To start off with, I tried to get this php interface to play nice with wget and curl first because I'm more familiar with them. The following command works: wget --post-data "hostname=localhost:3306&un=joeuser&pw=psswd&myquery=show_spazio_databases;" http://some.host.edu/log/log_query_matlab.php The results are: database1 database2 That's good. If I leave out the --post-data then I get the result: Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'admin'@'localhost' (using password: NO) in /log/log_query_matlab.php on line 6 i'm dead! Access denied for user 'admin'@'localhost' (using password: NO) Warning: mysql_query() [function.mysql-query]: Access denied for user 'admin'@'localhost' (using password: NO) in /log/log_query_matlab.php on line 29 Warning: mysql_query() [function.mysql-query]: A link to the server could not be established in /log/log_query_matlab.php on line 29 I have access to the php script (read only), but the error itself isn't too important. What matters it that using ROOT, I use a function called as socket.SendRaw(message, message.Length()) (socket is a TSocket) and this gives me the same "error" as wget without the post data switch if my "message" is "POST http://some.host.edu/log/log_query_matlab.php?hostname=localhost:3306&un=joeuser&pw=psswd&myquery=show_spazio_databases" This may be in vain, but does someone knows a way I should format the "message" that includes something that is equivalent to the --post-data switch. Or, is there a standard way to format POST requests in a single line (I've seen multi-line stuff. Is that right?) Sorry I'm clueless! PS. The mysql query is show databases but the space has been replaced with _spazio_, Italian for space. The author of the db and php interface requires it (and various replacements for symbols), but has anyone seen this before? Trying to troubleshoot that was terrible!

  Read the article

• Validation of viewstate MAC failed with nested master page

  - by just_name

  After I use a nested master page ,I face the following problem : Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster. and sometimes Invalid related information [ViewStateException: Invalid viewstate. Client IP: 127.0.0.1 Port: User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:17.0) Gecko/20100101 Firefox/17.0 ViewState: 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...] [HttpException (0x80004005): Validation of viewstate MAC failed. If this application is hosted by a Web Farm or cluster, ensure that <machineKey> configuration specifies the same validationKey and validation algorithm. AutoGenerate cannot be used in a cluster.] System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +116 System.Web.UI.ViewStateException.ThrowMacValidationError(Exception inner, String persistedState) +13 System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +220 System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +5 System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37 System.Web.UI.HiddenFieldPageStatePersister.Load() +202 System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +106 System.Web.UI.Page.LoadAllState() +43 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3905 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +262 System.Web.UI.Page.ProcessRequest() +79 System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +21 System.Web.UI.Page.ProcessRequest(HttpContext context) +109 ASP.frm_items2_aspx.ProcessRequest(HttpContext context) in c:\Windows\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\a961040e\19f53d4c\App_Web_frm_items2.aspx.cdcab7d2.nkfrbsfi.0.cs:0 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +399 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +76 I use this Tool to fix this problem but in vain !! I don't know even the root cause of this problem !!

  Read the article

• Side by side madness - running binaries on different computer (with a twist)

  - by sbk

  Here's my configuration: Computer A - Windows 7, MS Visual Studio 2005 patched for Win7 compatibility (8.0.50727.867) Computer B - Windows XP SP2, MS Visual Studio 2005 installed (8.0.50727.42) My project has some external dependencies (prebuilt DLLs - either build on A or downloaded from the Internet), a couple of DLLs built from sources and one executable. I am mostly developing on A and all is fine there. At some point I try to build my project on computer B, copying the prebuilt DLLs to the output folder. Everything builds fine, but trying to start my application I get The application failed to initialize properly (0xc0150002).... The event log contains two of those: Dependent Assembly Microsoft.VC80.CRT could not be found and Last Error was The referenced assembly is not installed on your system. plus the slightly more amusing Generate Activation Context failed for some.dll. Reference error message: The operation completed successfully. At this point I'm trying my Google-Fu, but in vain - virtually all hits are about running binaries on machines without Visual Studio installed. In my case, however, the executables fail to run on the computer they are built. Next step was to try dependency walker and it baffled me even more - my DLLs built from sources on the same box cannot find MSVCR80.DLL and MSVCP80.DLL, however the executable seems to be alright in respect to those two DLLs i.e. when I open the executable with dependency walker it shows that the MSVC?80.DLLs can be found, but when I open one of my DLLs it says they cannot. That's where I am completely out of ideas what to do so I'm asking you, dear stackoverflow :) I admit I'm a bit blurry on the whole side-by-side thing, so general reading on the topic will also be appreciated.

  Read the article

• Any high-level languages that can use c libraries?

  - by Isaiah

  I know this question could be in vain, but it's just out of curiosity, and I'm still much a newb^^ Anyways I've been loving python for some time while learning it. My problem is obviously speed issues. I'd like to get into indie game creation, and for the short future, 2d and pygame will work. But I'd eventually like to branch into the 3d area, and python is really too slow to make anything 3d and professional. So I'm wondering if there has ever been work to create a high-level language able to import and use c libraries? I've looked at Genie and it seems to be able to use certain libraries, but I'm not sure to what extent. Will I be able to use it for openGL programing, or in a c game engine? I do know some lisp and enjoy it a lot, but there aren't a great many libraries out there for it. Which leads to the problem: I can't stand C syntax, but C has libraries galore that I could need! And game engines like irrlicht. Is there any language that can be used in place of C around C? Thanks so much guys

  Read the article

• Connect to a remote Oracle 11g server using OracleClient of .NET 2.0

  - by Raghu M

  I have to connect to a Oracle server on the network using a .NET / C# (Winform) application. I am trying to use System.Data.OracleClient but in vain. Here are the details I can possibly think of (that might help someone reading this question): Platform: Visual Studio 2005 / .NET 2.0 with C# on Windows Vista Home Premium Library: System.Data.OracleClient Server: Oracle 11g (located on the same LAN) Please note that I don't have Oracle installed locally and I have hunted every discussion forum possible for help - but most of them assume local Oracle installation! Here is my connection string: "User Id=TSUSER;Password=ts12TS;Data Source=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MyServerIP)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ORCL)));" And I get this error: OCIEnvCreate failed with return code -1 but error message text was not available. Stack trace: at System.Data.OracleClient.OciHandle..ctor(OciHandle parentHandle, HTYPE handleType, MODE ocimode, HANDLEFLAG handleflags) at System.Data.OracleClient.OracleInternalConnection.OpenOnLocalTransaction(String userName, String password, String serverName, Boolean integratedSecurity, Boolean unicode, Boolean omitOracleConnectionName) at System.Data.OracleClient.OracleInternalConnection..ctor(OracleConnectionString connectionOptions) at System.Data.OracleClient.OracleConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.OracleClient.OracleConnection.Open() at DGKit.Util.DataUtil.Generate() in D:\SVNRoot\sandbox\DGDev\Util\DataUtil.cs:line 68

  Read the article

• Ignore folders with certain filetypes

  - by gavin19

  I'm trying in vain to rewrite my old Powershell script found here - "$_.extension -eq" not working as intended? - for Python.I have no Python experience or knowledge and my 'script' is a mess but it mostly works. The only thing missing is that I would like to be able to ignore folders which don't contain 'mp3s', or whichever filetype I specify. Here is what I have so far - import os, os.path, fnmatch path = raw_input("Path : ") for filename in os.listdir(path): if os.path.isdir(filename): os.chdir(filename) j = os.path.abspath(os.getcwd()) mp3s = fnmatch.filter(os.listdir(j), '*.txt') if mp3s: target = open("pls.m3u", 'w') for filename in mp3s: target.write(filename) target.write("\n") os.chdir(path) All I would like to be able to do (if possible) is that when the script is looping through the folders that it ignores those which do NOT contain 'mp3s', and removes the 'pls.m3u'. I could only get the script to work properly if I created the 'pls.m3u' by default. The problem is that that creates a lot of empty 'pls.m3u' files in folders which contain only '.jpg' files for example. You get the idea. I'm sure this script is blasphemous to Python users but any help would be greatly appreciated.

  Read the article

• Avoid MySQL multi-results from SP with Execute

  - by hhyhbpen

  Hi, i have an SP like BEGIN DECLARE ... CREATE TEMPORARY TABLE tmptbl_found (...); PREPARE find FROM" INSERT INTO tmptbl_found (SELECT userid FROM ( SELECT userid FROM Soul WHERE .?.?. ORDER BY .?.?. ) AS left_tbl LEFT JOIN Contact ON userid = Contact.userid WHERE Contact.userid IS NULL LIMIT ?) "; DECLARE iter CURSOR FOR SELECT userid, ... FROM Soul ...; ... l:LOOP FETCH iter INTO u_id, ...; ... EXECUTE find USING ...,. . .,u_id,...; ... END LOOP; ... END// and it gives multi-results. Besides it's inconvenient, if i get all this multi-results (which i really don't need at all), about 5 (limit's param) for each of the hundreds of thousands of records in Soul, i'm afraid it will take all my memory (and all in vain). Also, i noticed, if i do prepare from an empty string, it still has multi-results... At least how to get rid of them in the execute statement? And i would like to have a recipe to avoid ANY output from SP, for any possible statement (i also have a lot of "update ..."s and "select ... into "s inside, if they can produce multi's). Tnx for any help...

  Read the article

• Spree customize/extend user roles and permissions

  - by swapnil

  I am trying to specify some custom roles in Spree for example role 'client' and extend the permissions to access the admin section for this role. This user will be able to access only those Product created by that user. Concept is letting a user with role 'client' manage only products and other certain Models. To start with I added CanCan plugin and defined a RoleAbility Class in role_ability.rb Just following this post : Spree Custom Roles Permissions class RoleAbility include CanCan::Ability def initialize(user) user ||= User.new if user.has_role? 'admin' can :manage, :all elsif user.has_role? 'client_admin' can :read, Product can :admin, Product end end end Added this to an initializer : config/initializers/spree.rb Ability.register_ability(RetailerAbility) Also extended admin_products_controller_decorator.rb :app/controllersadmin_products_controller_decorator.rb Admin::ProductsController.class_eval do def authorize_admin authorize! :admin, Product authorize! params[:action].to_sym, Product end end But I am getting flash message 'Authorisation Failure' Trying to find some luck, I referred following links A github gist for Customizing Spree Roles : https://gist.github.com/1277326 Here's a similar issue what I am facing : http://groups.google.com/group/spree-user/browse_thread/thread/1e819e10410d03c5/23b269e09c7ed47e All efforts in vain... Any pointers of what is going on here highly appreciated ? Thanks in advance.

  Read the article

• VS2010 Web Deploy: how to remove absolute paths and automate setAcl?

  - by Julien Lebosquain

  The integrated Web Deployment in Visual Studio 2010 is pretty nice. It can create a package ready to be deployed using MSDeploy on a target IIS machine. Problem is, this package will be redistributed to a client that will install it himself using the "Import Application" from IIS when MSDeploy is installed. The default package created always include the full path from the development machine, "D:\Dev\XXX\obj\Debug\Package\PackageTmp" in the source manifest file. It doesn't prevent installation of course since it was designed this way, but it looks ugly in the import dialog and has no meaning to the client. Worse he will wonder what are those paths and it looks quite confusing. By customizing the .csproj file (by adding MSBuild properties used by the package creation task), I managed to add additional parameters to the package. However, I spent most of the afternoon in the 2600 lines long Web.Publishing.targets trying to understand what parameter influenced the "development path" behavior, in vain. I also tried to use the setAcl to customize security on a given folder after deployment, but I only managed to do this with MSBuild by using a relative path... it shouldn't matter if I resolve the first problem though. I could modify the generated archive after its creation but I would prefer if everything was automatized using MSBuild. Does anyone know how to do that?

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >