Search Results

Search found 17187 results on 688 pages for 'vpn connection'.

Page 4/688 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Site-to-Site PPTP VPN connection between two Windows Server 2008 R2 servers

  - by steve_eyre

  We have two Windows Server 2008 R2 machines, one in our main office and one in a new office which we have just moved offsite. The main office has previously been handling client-to-server PPTP VPN connections. Now that we have moved our second server out of office, we want to set up a demand-dial or persistent VPN connection from the second server to the primary. Using a custom setting RRAS profile, we have successfully managed to set up a site-to-site VPN connection so that from the second server itself, it can access any of the devices in the main office and communicate back. However, any connected machines in the second office cannot use this connection, even when using the second server as gateway. The demand-dial interface is setup from the Second Server dialing into Main Server and a static route set up on RRAS for 192.168.0.0 with subnet mask 255.255.0.0 pointing down this network interface. The main office has the network of 192.168.0.0/16 (subnet mask 255.255.0.0). The second office has the network of 172.16.100.0/24 (subnet mask 255.255.255.0). What steps do we need to take to ensure traffic from the second office PCs going towards 192.168.x.x addresses use the VPN route? Many Thanks in advance for any help the community can offer. Debug Information Here is the route print output from the second server: =========================================================================== Interface List 23...........................Main Office 22...........................RAS (Dial In) Interface 16...e0 db 55 12 fa 02 ......Local Area Connection - Virtual Network 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.222 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 <MAIN OFFICE IP> 255.255.255.255 172.16.100.250 172.16.100.222 6 172.16.100.0 255.255.255.0 On-link 172.16.100.222 261 172.16.100.113 255.255.255.255 On-link 172.16.100.113 306 172.16.100.222 255.255.255.255 On-link 172.16.100.222 261 172.16.100.223 255.255.255.255 On-link 172.16.100.222 261 172.16.100.224 255.255.255.255 On-link 172.16.100.222 261 172.16.100.225 255.255.255.255 On-link 172.16.100.222 261 172.16.100.226 255.255.255.255 On-link 172.16.100.222 261 172.16.100.227 255.255.255.255 On-link 172.16.100.222 261 172.16.100.228 255.255.255.255 On-link 172.16.100.222 261 172.16.100.229 255.255.255.255 On-link 172.16.100.222 261 172.16.100.230 255.255.255.255 On-link 172.16.100.222 261 172.16.100.255 255.255.255.255 On-link 172.16.100.222 261 192.168.0.0 255.255.0.0 192.168.101.87 192.168.101.17 266 192.168.101.17 255.255.255.255 On-link 192.168.101.17 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.222 261 224.0.0.0 240.0.0.0 On-link 172.16.100.113 306 224.0.0.0 240.0.0.0 On-link 192.168.101.17 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.222 261 255.255.255.255 255.255.255.255 On-link 172.16.100.113 306 255.255.255.255 255.255.255.255 On-link 192.168.101.17 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.200 Default 0.0.0.0 0.0.0.0 172.16.100.250 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 16 261 fe80::/64 On-link 16 261 fe80::edf4:85c6:3c15:dcbe/128 On-link 1 306 ff00::/8 On-link 16 261 ff00::/8 On-link 22 306 ff00::/8 On-link =========================================================================== Persistent Routes: None And here is the route print from one of the second office PCs: =========================================================================== Interface List 11...10 78 d2 32 53 27 ......Atheros AR8151 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.100.250 172.16.100.103 10 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.100.0 255.255.255.0 On-link 172.16.100.103 266 172.16.100.103 255.255.255.255 On-link 172.16.100.103 266 172.16.100.255 255.255.255.255 On-link 172.16.100.103 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.100.103 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.100.103 266 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 11 266 fe80::/64 On-link 11 266 fe80::e973:de17:a045:aa78/128 On-link 1 306 ff00::/8 On-link 11 266 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Route traffic on vpn to another interface on an ASA 5510

  - by Dave

  I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site (192.168.200.0) to the 192.168.2.0 subnet on the ASA. I have remote applications I would like the users at the remote site to be able to access which are hosted on the 192.168.3.0 subnet. I can route traffic between the subnets that are located on the ASA. Any way I can route traffic from the remote site to the 192.168.3.0?

  Read the article

• Access VirtualBox client (WinXP) from host (Linux) when client is connected to VPN

  - by hsz

  Hello ! I have a host (Ubuntu Linux) with VirtualBox on which is installed client (Windows XP). I set bridge connection for them. Host has IP 192.168.0.102 and client 192.168.0.103. On client I've installed WAMP server and on host I can access it by simply call 192.168.0.103. When I connect on client to the Cisco VPN (need access to database over VPN) I cannot access that server from host. What should I do to make it work ?

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• Cisco VPN and .pcf file

  - by yael

  I have few of profiles .pcf files , and I used them in order to automate the vpmclient connection VIA CLI command I have WIN XP server for example vpmclient connect "customor_alpha" until now everything is ok but I have problem with the last of my profiles - area1.pcf the problem is when I type in CMD window the following ( to create VPN connection ) vpmclient connect "area1" after 2 second CISCO window will pop up and ask for password , ( username already defined in window ) please advice what could be the problem , why I get the "CISCO PVN window" ? or maybe I have some in correct syntax in my .pcf file , I checked the .pcf file again and again and I couldn't find the problem ? example of area1.pcf ( only example - not my real pcf ) [main] Description=connection to TechPubs server Host=10.10.99.30 AuthType=1 GroupName=docusers GroupPwd= enc_GroupPwd=158E47893BDCD398BF863675204775622C49<SNIPPED> EnableISPConnect=0 ISPConnectType=0 ISPConnect= ISPCommand= Username=alice SaveUserPassword=0 UserPassword= enc_UserPassword= NTDomain= EnableBackup=1 BackupServer=Engineering1, Engineering2, Engineering 3, Engineering4 EnableMSLogon=0 MSLogonType=0 EnableNat=1 EnableLocalLAN=0 TunnelingMode=0 TCPTunnelingPort=10000 CertStore=0 CertName= CertPath= CertSubjectName SendCertChain=0 VerifyCertDN=CN=”ID Cert”,OU*”Cisco”,ISSUER-CN!=”Entrust”,ISSURE-OU!*”wonderland” DHGroup=2 PeerTimeOut=90 ForceNetLogin=

  Read the article

• VPN Network intermittantly fails to provide internet: What could be possible causes

  - by Jake M

  We have a small office with our own VPN setup. We occasionally experience failures in our internet connection where we cannot access the internet. Most of the time the internet connection will resume by itself(without me doing anything) after a period of time(10 mins). Would you be able to suggest possible causes of the connection failure so I can then go and run some tests? Our network architecture is like so: A 'Billion' brand router that is connected to the internet via phone cable and then connected to our Cisco Switch A Cisco Switch/Bus which is connected to all our office nodes, our external harddrive and also to our router as stated above. All connections are via ethernet cable A series of work computers(nodes) connected via ethernet cable to the Cisco switch. Our ISP is TPG Australia We have a Virtual Private Network All the ethernet cables are about 3 years old Do you think that the causes of our intermittant connection problems could be due to the following: Data collisions in the ethernet cables Old/Faulty ethernet cables Our ISP has bad service Can you think of any other causes of the problem?

  Read the article

• Gateway IP for eth0 and gateway IP for pptp vpn are same

  - by user286630

  My problem is.. 1) I'm using laptop at school. 2) In school, the default gateway for ethernet is 192.168.1.1. 3) I want to connect to a pptp vpn server. The gateway over the vpn connection is also 192.68.1.1. (The VPN server assigns 192.168.100.1 to my laptop and I confirmed that it is not used in school.) In this situation, there is no problem in Windows 7. I think it is enough smart to distinguish two different gateways with the same IP. All connection requests may be forwarded to the vpn gateway. But, in Ubuntu, I cannot access a file server in the remote site. I guess every connection request is forwarded to the ethernet gateway. How can I send all connection requests to the vpn gateway whose IP is same as the ethernet gateway?

  Read the article

• How to share internet over VPN and inside a virtual machine (Windows)?

  - by mountrix

  ` My final goal is to have a virtual machine at work in which anything that happen inside (tcp, udp, ping, ...) will use the Internet connection of a computer at home. So, if inside this VM should I open an Internet browser to a site such as "show my IP", my home IP should be printed. I am also looking for a way to debug/develop a software inside this VM, but I would like to tunnel only the connections of this software, not the full graphical interface, this is why a Remote Desktop solution won't fit me. The connection between the both computer should be secured somehow, like in a SSH tunnel. This ultimately should allow me to have a portable VM in which I can connect to whatever networks I have access at home, in a secure way. This is my configuration: At work, I have a LAN-connected desktop computer, with Windows 7 Professional Edition as a host [computer W] On this same computer, I have a Virtual Box machine running Windows XP [computer V] At home, I have a laptop computer, running Windows 7 Home Edition [computer H] This laptop is connected to a Livebox 2 broadband modem by Wifi. What I am trying to do is to sit at work in front of the virtual machine [V], and connect to a webpage as if the request was issued from the laptop [H] at home, and the data should be securely tunneled between the both. But if I am using internet directly inside [W], it should use the normal LAN interface at work. To achieve my goal, I first try using VPN, than SSH tunneling, without success. I first tried to install Teamviewer between [W] and [H]. This is working fine, I can send files, share desktop, etc. Teamviewer has a VPN mode that creates a new VPN network interface with its own IP, both on computer [W] and [H]. This allowed me to connect [H] as a network computer inside [W] and I was able to share files, but not to share Internet. At this point, I tried to use from [W] the Internet as if I was at home. I setup a route (using route add from command line in [W]) in order to instruct each packet going to a given website to pass by the new VPN interface on [W], with the hope it will be forwarded to [H], but the webpage was simply inaccessible. I then tried to setup a Windows VPN connection between [W] and [H], using the Windows 7 VPN feature. [H] was the server and [W] the client. But it failed: I got the "Unable to join a remote PC while trying to VPN" 720 Error when I was setting up the client on [W]. I think the problem is the Livebox 2 that could blocks the packets. But I am not sure of this: 1) with Teamviewer it works fine, 2) Livebox 2 has a configuration page for port mapping that gives the proper configuration to map VPN ports as an example so I guess that it should allow it, 3) I opened the ports 1723 (TCP) and 500 (UDP) according to some forums. Virtual box has a network configuration parameter in which I can use the VPN network interface created by Teamviewer as a bridged connection. This is suppose to work in the sense that all packets issued by the virtual machine [V] is supposed to go directly to [H]. But I had no internet connection inside [V]. Using the NAT mode, [V] has internet. For me this is the feature that I look for: filtering all connections from the virtual box application to the VPN network interface, and the remaining should use the normal LAN interface. Apart from the build-in feature of VBox, I even do not know if it is possible to route the packet from a given application to a given interface. Finally I tried also SSH tunneling, but this is not the solution I looked for. Using an external SSH server (Linux), I was able to create a localhost connection on [W] (or [V]), using something like 'ssh -N -D server[H]' in order to allow a web browser located in [W] to connect to any website using the SOCKS 5 proxy created locally (SOCKS is a build-in feature of SSH). But repeating the same operation on windows, using a windows SSH server inside [W] (I tried freeSSHd), it failed: SFTP worked, but not the SOCKS tunneling, it was like the browser in [H] did not find internet. Finally only Teamviewer looked able to create a VPN between [W] and [H], but I am not able to use it, as I want, I mean using the Internet connection of [H] sitting in front of [W]. I also tried to bridge the VPN interface and the wifi interface inside [H], but it blocked my laptop, and I tried also the Internet Connection Sharing, trying to share on [H] the wifi connection over the VPN interface. This fails also, but it seems because Teamviewer actually use the wifi interface to be able to provide the VPN link, so I guess I am creating a recursive loop. I do not know what to try next... Thank you for any advice!!

  Read the article

• Always on VPN connection

  - by greg

  I have a working VPN connection. Works like a dream. What isn't working though, is the 'Connect Automatically' option in the Network Connections Manager Panel. It never connects automatically, not at boot, and not after disconnect. I'm not quite sure what that option is for. And I'll get disconnected from the VPN with no warning whatsoever. Is there a way to make sure my computer only connects to the internet through a VPN? So that if the VPN connection isn't established, my computer can't reach the internet. And is there a way to get ubuntu to attempt to reconnect to the VPN automatically if for some reason the connection drops?

  Read the article

• Connection Pooling vs Per-Thread JDBC Connection

  - by java_geek

  Which of these approaches is better ?

  Read the article

• Setting up a VPN server on Windows XP from the console

  - by dax

  I want to set up a VPN server in Windows XP. I know how to do this using the GUI dialogs but I'm wondering if it's possible to do it from console.

  Read the article

• Advice on Auditing VPN Connections

  - by WhiteAdam

  I've inherited a network that is truly a mess and the VPN config is amazingly long with confusing group names and very little documentation. I am curious to see how others have gone about auditing these types of connections. Are there any forms out there? What information should I collect? I assume things like Customer, Department, Technical Lead, and etc. Thanks in advance for any advice on this nightmare.

  Read the article

• How to have internet connection over VPN while "Microsoft Firewall Client for ISA server" is running

  - by blocked

  I have the software mentioned in the title running on my machine. When I connect over VPN to my company's network, my internet connection gets borked, because somehow the ISA firewall blocks it. This is completely idiotic, because my work involves extensive use of the internet, so having to disconnect and reconnect continuously seriously cripples my productivity. (Meaning: I'm tearing my hair out here.) Can I have my VPN connection and somehow still have my internet connection too? I'm open to any solution.

  Read the article

• How to have internet connection over VPN while "Microsoft Firewall Client for ISA server" is running

  - by blocked

  I have the software mentioned in the title running on my machine. When I connect over VPN to my company's network, my internet connection gets borked, because somehow the ISA firewall blocks it. This is completely idiotic, because my work involves extensive use of the internet, so having to disconnect and reconnect continuously seriously cripples my productivity. (Meaning: I'm tearing my hair out here.) Can I have my VPN connection and somehow still have my internet connection too? I'm open to any solution.

  Read the article

• l2tp / ipsec debian Openswan U2.6.38 does not connect

  - by locojay

  i am trying to get ipsec/l2tp running on a debian server with an iphone as a client but always get: Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [RFC 3947] method set to=115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] meth=114, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-08] meth=113, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-07] meth=112, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-06] meth=111, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-05] meth=110, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-04] meth=109, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 115 Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: ignoring Vendor ID payload [FRAGMENTATION 80000000] Dec 2 21:00:04 vpn pluto[22711]: packet from <clientip>:43598: received Vendor ID payload [Dead Peer Detection] Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: responding to Main Mode from unknown peer <clientip> Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: STATE_MAIN_R1: sent MR1, expecting MI2 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: STATE_MAIN_R2: sent MR2, expecting MI3 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: Main mode peer ID is ID_IPV4_ADDR: '10.2.210.176' Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[4] <clientip> #20: switched from "L2TP-PSK-noNAT" to "L2TP-PSK-noNAT" Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: deleting connection "L2TP-PSK-noNAT" instance with peer <clientip> {isakmp=#0/ipsec=#0} Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: transition from state STATE_MAIN_R2 to state STATE_MAIN_R3 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: new NAT mapping for #20, was <clientip>:43598, now <clientip>:49826 Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: STATE_MAIN_R3: sent MR3, ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_256 prf=oakley_sha group=modp1024} Dec 2 21:00:04 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: Dead Peer Detection (RFC 3706): enabled Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: the peer proposed: <public ip>/32:17/1701 -> 10.2.210.176/32:17/0 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: NAT-Traversal: received 2 NAT-OA. using first, ignoring others Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: responding to Quick Mode proposal {msgid:311d3282} Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: us: 171.138.2.13<171.138.2.13>:17/1701 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: them: <clientip>[10.2.210.176]:17/61719 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: Dead Peer Detection (RFC 3706): enabled Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2 Dec 2 21:00:05 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #21: STATE_QUICK_R2: IPsec SA established transport mode {ESP=>0x05e23c9a <0x216077a9 xfrm=AES_256-HMAC_SHA1 NATOA=10.2.210.176 NATD=<clientip>:49826 DPD=enabled} Dec 2 21:00:26 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received Delete SA(0x05e23c9a) payload: deleting IPSEC State #21 Dec 2 21:00:26 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received and ignored informational message Dec 2 21:00:27 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip> #20: received Delete SA payload: deleting ISAKMP State #20 Dec 2 21:00:27 vpn pluto[22711]: "L2TP-PSK-noNAT"[5] <clientip>: deleting connection "L2TP-PSK-noNAT" instance with peer <clientip> {isakmp=#0/ipsec=#0} Dec 2 21:00:27 vpn pluto[22711]: packet from <clientip>:49826: received and ignored informational message Dec 2 21:00:27 vpn pluto[22711]: ERROR: asynchronous network error report on eth0 (sport=4500) for message to <clientip> port 49826, complainant <clientip>: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] my setup looks like this verizon fios actiontec -- DMZ-- ddwrt router -- debian xen instance actiontec : 192.168.1.1 ddwrt: 171.138.2.1 debian xen server: 171.138.2.13 forwarded udp 500, 4500, 1701 on ddwrt to debian xen instance. vpn passthrough is enabled /etc/ipsec.conf config setup dumpdir=/var/run/pluto/ nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v6:fd00::/8,%v6:fe80::/10,%v4:!171.138.2.0/24,%v4:!192.168.1.0/24 protostack=netkey # Add connections here conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Apple iOS doesn't send delete notify so we need dead peer detection # to detect vanishing clients dpddelay=30 dpdtimeout=120 dpdaction=clear # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=171.138.2.13 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "%any" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port. rightprotoport=17/%any #force all to be nat'ed. because of ios conn passthrough-for-non-l2tp type=passthrough left=171.138.2.13 leftnexthop=171.138.2.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/xl2tp/xl2tp.conf [global] ipsec saref = no listen-addr = 171.138.2.13 ;port = 1701 ;debug network = yes ;debug tunnel = yes ;debug network = yes ;debug packet = yes [lns default] ip range = 171.138.2.231-171.138.2.239 local ip = 171.138.2.13 assign ip = yes require chap = no refuse pap = no require authentication = no ;name = OpenswanVPN ppp debug = yes pppoptfile = /etc/ppp/options.xlt2tpd lenght bit = yes /etc/ppp/options.xl2tpd ;require-mschap-v2 pcp-accept-local ipcp-accept-local ipcp-accept-remote ;ms-dns 171.138.2.1 ms-dns 192.168.1.1 ms-dns 8.8.8.8 name l2tpd noccp auth crtscts idle 1800 mtu 1410 mru 1410 lock proxyarp connect-delay 5000 debug dump logfd 2 logfile /var/log/xl2tpd.log ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K3.0.0-1-amd64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Two or more interfaces found, checking IP forwarding [FAILED] Checking NAT and MASQUERADEing [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] The failed can be ignored i guess since cat /proc/sys/net/ipv4/ip_forward returns 1 any help would be much appreciated as i don't have any idea why this is not working

  Read the article

• Cisco VPN Connection - No internet no nothing

  - by Kevin

  Hi all, Sorry if this has been posted, I tried searching but I am not exactly sure what I am looking for, I am a developer not a networking guy. We have a client whom we need to use Cisco VPN client to connect to their servers. I have installed the software, dropped in the provided .pcf file, and I can connect. However, when I do, I lose all local and internet capabilities, no hosts resolve, and I still can't connect to their internal FTP and development sites. This leads me to believe either a setting is wrong in my Cisco software, and/or their network is not correctly configured. Does anyone know anything about Cisco VPN'ing that can give me a hand? My colleague seems to indicate that they need to enable split tunneling on their end (or a similar setting).

  Read the article

• Windows or Linux for VPN-VPN Bridge

  - by James

  I have the following network layout: Network1 ----VPN1-----Network2----VPN2----Network3 I can administer everything in Network1 only and my goal is to get to a box on Network3. I've been told by the admins of Network2 that it's not possible for them to route traffic from Network1 to Network3. I've finally been authorised to host a box in Network2 and I'm hoping with this I can set something up to resolve the issue. My question is should I set this up as a Windows or a Linux box. My initial thought was to use iptables to reroute requests but with my lack of experience with Windows Server (used for something or other in Network2) I'm not sure if this will work. My head's full of questions like: - can I get an ip without logging in to a windows domain? - if I do get an ip, do Windows Servers manage routing through the VPN? - can I make a linux box authenticate with Windows Server to log on to the domain? - would it just be easier to set up a windows box? - is it possible to configure a windows box to do routing from Network1 to Network3? Has anyone done anything like this before? Had experience managing Windows Server? Authenticated (or not as the case may be) to a Windows domain? I'd really appreciate your advice. It might be worth mentioning that the overall objective is to establish a telnet connection from a box on Network1 to a box on Network3.

  Read the article

• Setup a vpn server on Ubuntu server, but client can't setup a connection

  - by Jing

  I setup a vpn server using pptpd on the ubuntu server which is installed in a virtual box machine on a windows 7 desktop. I configure the vpn server and port forwarding in the windows. However, I cannot setup a connection to the server. Here's the ubuntu log I got when I tried to connect to this vpn server Anyone can help me solve this problem? Also, is there any alternative way to setup a vpn server on windows or virtual machine installed on windows? Thanks!

  Read the article

• Exempt programs from using active VPN connection

  - by Oxwivi

  When I connect to a VPN, all my network traffic is automatically routed through it. Is there a way to add exemptions to that? I don't know if adding exceptions has anything to do with the VPN protocol, but the VPN I'm using is of the OpenVPN protocol. Speaking of OpenVPN, why is it not installed by default on Ubuntu installs unlike PPTP? I could not get the list of IRCHighWay's servers, and this is the result I get trying to connect on XChat with running the bash script running: * Looking up irc.irchighway.net * Connecting to irc.irchighway.net (65.23.153.98) port 6667... * Connected. Now logging in... * You have been K-Lined. * *** You are not welcome on this network. * *** K-Lined for Open proxies are not allowed. (2011/02/26 01.21) * *** Your IP is 173.0.14.9 * *** For assistance, please email [email protected] and include everything shown here. * Closing Link: 0.0.0.0 (Open proxies are not allowed. (2011/02/26 01.21)) * Disconnected (Remote host closed socket). The IP 173.0.14.9 is the one due to my VPN. I had forgotten to check ip route list before running the script, and this is the one after running it: ~$ ip route list 99.192.193.241 dev ppp0 proto kernel scope link src 173.0.14.9 173.0.14.2 via 192.168.1.1 dev eth1 proto static 173.0.14.2 via 192.168.1.1 dev eth1 src 192.168.1.3 192.168.1.0/24 dev eth1 proto kernel scope link src 192.168.1.3 metric 2 169.254.0.0/16 dev eth1 scope link metric 1000 default dev ppp0 proto static Oh and running the script returned this output: ~$ sudo bash irc_route.sh Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M] [netmask N] [mss Mss] [window W] [irtt I] [mod] [dyn] [reinstate] [[dev] If] inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject inet_route [-FC] flush NOT supported I ran the script after connecting to the VPN.

  Read the article

• Enforce VPN connection to access the Internet

  - by ch0wn

  I'm using a VPN when I'm online at an unencrypted wifi. Unfortunately, at my university the connection is quite unstable and at every reconnect the VPN connection is terminated and I manually need to reconnect to it using the NetworkManager, which obviously only works if I notice the reconnect. I enabled the option to automatically connect to the VPN in the NM options, but it seems to have no effect. Is there a way to enforce an active VPN connection before any other application can access the network connection so I can be sure not to send private data over unencrypted connections? Cheers, Pascal

  Read the article

• Cisco VPN connection using CertStore as in Windows

  - by hsz

  Hello ! In Windows I was using Cisco VPN client to connect with VPN. In connection properties I set only hostname and choose certificate which are stored in C:\Program Files\Cisco Systems\VPN Client\Certificates. I moved yesterday to Ubuntu and I need to be able to connect with that host using those certificates too. I know that there is vpnc and network-manager-vpnc but it not allows (or I do not know about it) to set cerificates dir. Can someone tell me how to connect with VPN using certificates ?

  Read the article

• VPN says "successfully connected" and I'm internet-connected, but I can't access network resources

  - by Al S.

  To explain, I'm a university student who uses the VPN to access sites like Nature, PhysicsToday, etc. I have this VPN working on Windows 7 and I've got access to nearly every journal. However on my Ubuntu 12.04 partition I'm able to connect to the internet (in fact I'm typing this while connected through the VPN presumably) but journals have locked me out. Is there a problem on my end that I can fix?

  Read the article

• Cannot mount a CIFS network share on Ubuntu over VPN

  - by Aron Rotteveel

  I have setup u VPN connection to our Windows 2008 server at the office and it seems to work fine. For some reason, however, I still am not able to access the network shares over a VPN connection using my standard fstab entries. When I am physically connected to the network, it works fine, but now when trying this over VPN I get the following error: mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) My /etc/fstab looks like this: //server2008/share /mnt/share cifs iocharset=utf8,credentials=/home/aron/.smbcredentials,uid=1000 0 0 As said, it works fine when physically connected, but over VPN it just wont work. Any help is appreciated.

  Read the article

• How to setup VPN as Proxy

  - by Nicolas Nox

  I have an PerfectPrivacy VPN connected via the OpenVPN-Network-Manger-Plugin (Ubuntu 12.04.1) and I want to assign a system wide proxy over that VPN. I have tried proxydriver that should do that automatically, but it works partially. The browser says that I have the IP of the VPN, but when I tried to send an eMail over SMTP (Port 25), I can´t connect to the mail server. In our company the smtp server port is closed, but that should be not a problem, when I do that over a VPN, shouldn´t it? greetings

  Read the article

• Trouble setting up openVPN/VPN

  - by kkiller23

  I'm having trouble setting up a VPN on my VPS that's running Ubuntu 11.04. I'm been following this guide http://tipupdate.com/how-to-install-openvpn-on-ubuntu-vps/ I'm able to start the VPN, but the command it tell's me to do after I start the VPN doesn't work for me. I've tried it about 5 different way's and i'll show you what i get now. :~# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables: No chain/target/match by that name. :~# iptables -A FORWARD state --state RELATED,ESTABLISHED -j ACCEPT Bad argument `state' Try `iptables -h' or 'iptables --help' for more information. I just can't get that to work and the VPN doesn't seem to be workign with out it. Can someone help me fix this?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >