Search Results

Search found 1976 results on 80 pages for 'nic wise'.

Page 40/80 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Duplicate IP address detection with multiple NICs

    - by sfink
    I am using arping -D to detect duplicate IP addresses within a network when setting up servers. (The network is controlled by someone else, and we have had many issues with IP allocation in the past.) It works fine as long as my host has a single NIC on a given VLAN, but when my host has more than one (I have one with 9 NICs on one VLAN and 1 on the other), arping -D always returns false collisions. The problem is that all 9 of my NICs respond to an ARP request for any of the IPs on those NICs. (These are real physical NICs, not aliases or anything.) I send out one ARP request packet, and get 9 ARP is-at ARP replies, one for each MAC address. I could implement my own solution by sniffing packets and checking for any replies with a MAC address other than the local NICs', but it seems like there ought to be an easier way.

    Read the article

  • Incredibly high latency for Ubuntu guest on Hyper-V

    - by Mark Henderson
    I've got several Ubuntu 10.04 virtual machines running as Hyper-V guests on Windows Server 2008 R2 SP1 and they're all perfectly fine. Today I installed my first Ubuntu 11.10 virtual machine and I'm seeing rediculous pings: These servers are all connected via gigabit to a local LAN, with almost no network traffic at all1, with a legacy network adapter in Hyper-V. I'm a bit of an Ubuntu n00b so I don't really know where to go from here. Any ideas? free -m reports: total used free shared buffers cached Mem: 485 470 15 0 63 299 -/+ buffers/cache: 107 378 Swap: 507 20 487 This is within a few mb of our other Ubuntu servers that are on 10.04. I removed the Legacy NIC and installed a Synthetic one in Hyper-V and this did improve the numbers, in that they're around 10-30ms now, but I would still be expecting <1ms response times. 1As a comparison, I have another Ubuntu 10.04 guest on Hyper-V almost 1,000km away that has a ping of 33ms

    Read the article

  • Will being a VPN Client interrupt web pages hosted by IIS?

    - by f1gm3nt3d
    We have a dedicated server that is primarily used to host our website. I've been tasked with determining the feasibility of setting up a VPN connection from it to our Internal Network at our offices for a few ease of use purposes. My concern is that if I establish this VPN connection our Website will only be available internally and not to the internet in general. I'm concerned about this because in everything I read the fact is stated that by default all network traffic is routed over the VPN connection when it's established, is this also true for applications such as IIS that are listening for incoming connections? TL;DR Will having a VPN Client up and running cause a problem with server applications that may be listening on the NIC connected to the Internet due to changes that VPN makes in the routing tables?

    Read the article

  • Basic networking problem with Ubuntu 9.04 on Acer Extensa 5635Z laptop

    - by sapporo
    I just installed Ubuntu 9.04 on a brand new Acer Extensa 5635Z laptop, but ethernet networking does't work (wireless doesn't work either, but I'd be happy with ethernet for now). eth0 isn't listed in /etc/network/interfaces: $ cat /etc/network/interfaces auto lo iface lo inet loopback lshw does show the nic, but I can't make much sense out of the information: $ sudo lshw -class network -sanitize *-network DISABLED description: Wireless interface product: AR928X Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:07:00.0 logical name: wmaster0 version: 01 serial: [REMOVED] width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath9k latency=0 module=ath9k multicast=yes wireless=IEEE 802.11bgn *-network UNCLAIMED description: Ethernet controller product: Attansic Technology Corp. vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:09:00.0 version: c0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list configuration: latency=0 *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: [REMOVED] capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes Thanks for your help!

    Read the article

  • Use pt-table-sync to setup a new MySQL DB

    - by Generation D Systems
    I have 2 hosts (A and B). B contains a MySQL server with a database called mydb, and A contains a MySQL server with nothing (fresh install). I want to replicate the entire mydb from B to A, by running a script on A (I do not have shell access to B). Can I run this on A: pt-table-sync --execute h=b.mydomain.com,D=mydb h=a.mydomain.com I've read the docs but don't get a 100% comfort feeling (perhaps because of all the warnings about damaging your data if you don't know what you're doing). Will this work? as well, is h=a.mydomin.com necessary? (Will it route all traffic back in/out the local NIC?) can I use localhost or nothing at all?

    Read the article

  • Server with 3 public IP and iptables

    - by Juan
    I have a linux box with two NIC cards: eth0 and eth1. In one card i have 3 public IP: eth0 = 10.10.10.1, eth0:1= 10.10.10.2 and eth0:2= 10.10.10.3 In the other card i have one local IP eth1 = 192.9.200.1 I want to redirect all the wan traffic for 10.10.10.2 to the LAN 192.9.200.2 and the same for 10.10.10.3 to 192.9.200.3 I have tried with this rule but doesn't work iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.2 -j DNAT --to-destination 192.9.200.2 iptables -t nat -A PREROUTING -i eth0 -d 10.10.10.3 -j DNAT --to-destination 192.9.200.3 IP forward is enabled in /etc/sysctl.conf Can you help me, please.

    Read the article

  • Event SRV error 2012 in Windows Server 2008 R2

    - by Natkeeran
    Error Warning "Event SRV error 2012 in Windows Server 2008 R2" is being logged with increasing frequency. NIC drivers were updated recently. There are some drops in the switches. This is the error: SRV 2012 While transmitting or receiving data, the server encountered a network error. Occassional errors are expected, but large amounts of these indicate a possible error in your network configuration. The error status code is contained within the returned data (formatted as Words) and may point you towards the problem.

    Read the article

  • Are there any vendors making a Gigabit Fiber solution for laptops?

    - by romandas
    I'm trying to build a laptop system that can connect to just about any network you might come across in a large enterprise. I realize I can use a media converter to go from twisted pair to fiber but prefer to have a NIC instead of a converter. Is there a vendor out there that actually makes a gigabit ethernet fiber adapter for laptops? Edit: A year after I asked this question, apparently Allied Telesis came out with the AT-2872SX ExpressCard which has an SC connector for Gigabit Ethernet. See syneticon-dj's answer below.

    Read the article

  • esxi VM will not connect to virual switch

    - by NitroxDM
    I have a exsi box with a VM (Windows 2003) that will not connect to any of the switches. The switch shows the VM connected but I can not ping anything on the network. I have double checked the VM's IP. No dice. There are a ton of messages in the log: [DATE 'VmMisc' NNNNN warning] Failed to validate VM IP address: unknown Update: There are 3 other VMs. Each vSwitch has 56 ports. I can ping from one nic to the other. Each vSwitch shows that the new VM is connect. VMware ESX Server 3i V 3.5.9 Build 123629 Update 2: Out of the blue it just started working. I didn't change anything. I think it has something to do with RRAS.

    Read the article

  • RDMA architecture - do you need adapters on both ends?

    - by Bobb
    I know Linux can use RDMA NICs like Solarflare... I just found Intel has something like that NetEffect cards. But Intel is talking all about clusters.. Can someone please explain. If I want low-latency networking and install RDMA NIC on my server. Is there limitation on where the cable can go? Is there a specific device expected on the other end? Is it special RDMA switch or RDMA adapter before switch or what? Why is this cluster talk? What if I want a single server with Windows (I can install HPC Windows or Windows 2008 R2)?

    Read the article

  • Performance issue when configuring non HA VM in cluster

    - by laiys
    Hi, I saw this article http://technet.microsoft.com/en-us/library/cc764243.aspx Quote taken from the link “ Important It is recommended that you not deploy virtual machines that are not highly available on your host clusters. Although you can do this by using Hyper-V (VMM does not allow it), the non-highly available virtual machines will consume resources that otherwise would be available to the HAVMs What kind of resources (CPU,memory, NIC, etc) that non HA VM will consume? Just curious as not all VM (in production) not to be in Failover Cluster and Live Migration. If i put the VM into CSV but did not make it as HA, what impact does it make since i allocate same vCPU, vNic and VMemory into the VM. (not to mention that i lost failover feature). Curious to understand more about this. Please advise. Thanks

    Read the article

  • Two Network Adapters on Hyper-V Host - Best way to configure?

    - by GoNorthWest
    Hi, I have two physical network adapters installed in my Hyper-V host. I want one to be dedicated to the host, and the other to provide external network services to the VMs. Would the appropriate configuration be as such: Leave the first physical network adapter alone, assigning it the host IP, but not using it to create any Virtual Netorks For the second physical adapter, I would create an External Network, along with a Microsoft Virtual Switch, and use that to provide network services to the VMs. Each virtual NIC for the VM would be associated with that External Network. A static IP would be assigned to this adapter, and each VM would be assigned a static IP as well. The above seems reasonable to me, but I'm not sure if it's correct. Does anyone have any thoughts? Thanks! Mark

    Read the article

  • arp problems with transparent bridge on linux

    - by Mink
    I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

    Read the article

  • Proxy Appliance

    - by Kumar
    I'm looking for a way to set-up a web proxy at home. Hopefully there's a solution I can use to do this. Alternatively, do you have any ideas for setting up one at home using a proxy with an auto updating list? UPDATE - AutoUpdating list so the new sites are categorized and downloaded and the filtering is done by category instead of per site e.g. peerblock works this way Appliance as in a small dedicated hardware or device to perform this task, like WD TV live or Acer Aspire Revo with the media center edition I'd be ok with setting up Squid / Linux / SquidGuard even if i'm not familiar with *nix but ideally a small form factor pc with dual nic's would be ideal so it can be out of sight for the most part !

    Read the article

  • UDP packets to IP addresses other than specific ones not arriving and not shown in Wireshark

    - by Max
    I'm writing a service using UDP, but I can't manage to reply to the client. When sending to the client via the DHCP-assigned IP (192.168.1.143) Wireshark shows no sent packets. The server receives and Wireshark shows any packet sent by the client (broadcasted). If I send to a random, unassigned IP Wireshark doesn't show it. I thought the NIC would happily send it, since there is a router in the way - shouldn't Wireshark show it, even though it cannot possibly be received by a remote endpoint? If I send to either the router IP or another (specific, there is only one other) computer, the packet is shown in Wireshark. I am running Windows 7, the firewall is turned off using the control panel. Does the fact that wireshark doesn't show these packets mean that they aren't sent? What reason could there be for showing packets to one IP, but not another, on the same subnet?

    Read the article

  • Talking JavaOne with Rock Star Raghavan Srinivas

    - by Janice J. Heiss
    Raghavan Srinivas, affectionately known as “Rags,” is a two-time JavaOne Rock Star (from 2005 and 2011) who, as a Developer Advocate at Couchbase, gets his hands dirty with emerging technology directions and trends. His general focus is on distributed systems, with a specialization in cloud computing. He worked on Hadoop and HBase during its early stages, has spoken at conferences world-wide on a variety of technical topics, conducted and organized Hands-on Labs and taught graduate classes.He has 20 years of hands-on software development and over 10 years of architecture and technology evangelism experience and has worked for Digital Equipment Corporation, Sun Microsystems, Intuit and Accenture. He has evangelized and influenced the architecture of numerous technologies including the early releases of JavaFX, Java, Java EE, Java and XML, Java ME, AJAX and Web 2.0, and Java Security.Rags will be giving these sessions at JavaOne 2012: CON3570 -- Autosharding Enterprise to Social Gaming Applications with NoSQL and Couchbase CON3257 -- Script Bowl 2012: The Battle of the JVM-Based Languages (with Guillaume Laforge, Aaron Bedra, Dick Wall, and Dr Nic Williams) Rags emphasized the importance of the Cloud: “The Cloud and the Big Data are popular technologies not merely because they are trendy, but, largely due to the fact that it's possible to do massive data mining and use that information for business advantage,” he explained. I asked him what we should know about Hadoop. “Hadoop,” he remarked, “is mainly about using commodity hardware and achieving unprecedented scalability. At the heart of all this is the Java Virtual Machine which is running on each of these nodes. The vision of taking the processing to where the data resides is made possible by Java and Hadoop.” And the most exciting thing happening in the world of Java today? “I read recently that Java projects on github.com are just off the charts when compared to other projects. It's exciting to realize the robust growth of Java and the degree of collaboration amongst Java programmers.” He encourages Java developers to take advantage of Java 7 for Mac OS X which is now available for download. At the same time, he also encourages us to read the caveats. Originally published on blogs.oracle.com/javaone.

    Read the article

  • Talking JavaOne with Rock Star Raghavan Srinivas

    - by Janice J. Heiss
    Raghavan Srinivas, affectionately known as “Rags,” is a two-time JavaOne Rock Star (from 2005 and 2011) who, as a Developer Advocate at Couchbase, gets his hands dirty with emerging technology directions and trends. His general focus is on distributed systems, with a specialization in cloud computing. He worked on Hadoop and HBase during its early stages, has spoken at conferences world-wide on a variety of technical topics, conducted and organized Hands-on Labs and taught graduate classes.He has 20 years of hands-on software development and over 10 years of architecture and technology evangelism experience and has worked for Digital Equipment Corporation, Sun Microsystems, Intuit and Accenture. He has evangelized and influenced the architecture of numerous technologies including the early releases of JavaFX, Java, Java EE, Java and XML, Java ME, AJAX and Web 2.0, and Java Security.Rags will be giving these sessions at JavaOne 2012: CON3570 -- Autosharding Enterprise to Social Gaming Applications with NoSQL and Couchbase CON3257 -- Script Bowl 2012: The Battle of the JVM-Based Languages (with Guillaume Laforge, Aaron Bedra, Dick Wall, and Dr Nic Williams) Rags emphasized the importance of the Cloud: “The Cloud and the Big Data are popular technologies not merely because they are trendy, but, largely due to the fact that it's possible to do massive data mining and use that information for business advantage,” he explained. I asked him what we should know about Hadoop. “Hadoop,” he remarked, “is mainly about using commodity hardware and achieving unprecedented scalability. At the heart of all this is the Java Virtual Machine which is running on each of these nodes. The vision of taking the processing to where the data resides is made possible by Java and Hadoop.” And the most exciting thing happening in the world of Java today? “I read recently that Java projects on github.com are just off the charts when compared to other projects. It's exciting to realize the robust growth of Java and the degree of collaboration amongst Java programmers.” He encourages Java developers to take advantage of Java 7 for Mac OS X which is now available for download. At the same time, he also encourages us to read the caveats.

    Read the article

  • cloning mac address of physical server converted into vmware server

    - by user24981
    We've recently converted a physical Windows Server 2003 into vmware using P2V. However, one of the pieces of software on the 2003 machine are still looking for the old server's network MAC address in order to run. I've read several articles where it's discussed that you can modify the last part of the generated address and set it to static, but I need to clone the whole mac address to mimic the one in the old server. We're running CentOS and VMware server 2.0 as the host system. I was told that maybe adding in a second network card in the host and setting the virtual system's nic to that card instead of "bridged" would allow me to edit the vmx file and clone the whole MAC address. I can't use the old network card from the physical server because it's ISA and our new bus is PCI Any ideas? Thanks, Mike

    Read the article

  • How to Set Linux Bonding Interface to Gigabit

    - by Kyle Brandt
    I have enabled Linux active backup mode bonding. Each interface is a gigabit interface, but the bond interface seems to end up at 100 Megabit: bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full. ... bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON ... bonding: bond0: backup interface eth1 is now up ethtool apparently can't provide info on bond: sudo ethtool bond0 Settings for bond0: No data available So does this mean I am operating at 100 or 1000 Megabit (My guess is 1000)? If it is only 100, what options in the ifcfg scripts or the modprobe bonding options do I need to sett to make it 1000?

    Read the article

  • Linux does not communicate to Windows subinterface

    - by artaxerxe
    I set my NIC on Windows so that I have two interfaces: one (the first one) has IP 192.168.0.5 the other one has IP 10.10.10.1. On a Linux machine I set an interface to 10.10.10.2. On another Linux machine I set the interface to 10.10.10.3. And tried to ping those machines. Here is the result. Linux to Linux is ok. Windows to Linux also is ok. But Linux to Windows does not work. Can you help me on getting the communication between Linux and Windows? What should I do for this? I have to mention that those machines are connected through a switch. If you need any details, ask me please! Thanks in advance!

    Read the article

  • How to route HyperV VMs traffic through host VPN

    - by Random
    I'm using Windows 8.1 Pro with HyperV. I have several VMs for development, all of them connected with host via Internal adapter using network addresses: 192.168.10.0/24 Where: 192.168.10.1 is my host's Hyper-V internal NIC address. When I'm not in my office I use 3G usb dongle an dialup VPN connection. I would like to route traffic from all existing and future VMs through the VPN. In best scenario traffic would be routed only partially to the local company network addresses 10.1.1.0/24 I don't want to use sharing because I'm switching between WiFi, USB 3G dongle and VPN. Moving to other virtualization is also not an option for me.

    Read the article

  • Exclude IPs from FQDN Resolution

    - by Jon Rauschenberger
    Is there a way to EXCLUDE IPs on an interface from FQDN resulution? Here's my use case; I have a domain joined Windows Server 2008 R2 machine that hosts multiple Web sites. We ahve DNS A records for the various sites that resolve to different IP addresses. I've added those IPs to the single NIC in the machine and the sites work just fine. The problem is that the FQDN of the machine now resolves any of the IPs on the machine. I only want the primary IP associated with the FQDN on the internal DNS servers. Is there ANY way to accomplish this? jon

    Read the article

  • ISA Server Route Add Question

    - by Kip
    Hi All, I have a situation where I have and ISA 2006 server (on Win2k3) that has an internal and an externaly facing NIC's. All works fine but I need to add a couple of routes for the following reason: Our monitoring software is on a different network. Our Terminal server is on a different network. Currently, access to the internet, through this proxy server, from the terminal server fails. Also, monitoring of the ISA server via a remote monitor or the installed agent talking to the remote monitor (BMC) also fails. The default enterprise rule on ISA blocks the traffic as I beleive it doesn't trust / know about those networks. Here is my routing table: I need to add a couple of address, but this one being the main one: 192.168.245.137 / mask 255.255.255.192 / gateway 192.168.245.129 But I can't get it to work. Routing is not my strong point but at the moment have no one else available to help. Can you offer any assistance? Please ask if you need more info

    Read the article

  • Is the Realtek network driver on Windows Update fixed yet?

    - by Ian Boyd
    Months ago i was experiencing problems with my networking, and was hoping the updated Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) driver available from Microsoft on Windows Update would fix the problems. Instead, after the reboot, the network device failed to start, and the driver had to be rolled back. I'm not the only person to get this problem, it even was dealt with by a superuser. A co-worker experienced the exact same problem, and we independently came up with the same solution: hide the updated driver in Windows Update. So I've continued to have my network troubles, and i still need an updated driver. Is the version of the Realtek driver on Windows Update fixed yet? i know Microsoft never pulled it down, but maybe it's been up-updated. i really don't want to find out by downloading it. Can someone else confirm that it's no longer broken - or can someone else be my guinea pig?

    Read the article

  • rhel/centos vs. ubuntu (possibly other debian-based systems) linux in handling duplicate ips in the same subnet

    - by johnshen64
    This has bothered me for quite a while but I never found out why or how to change the behavior. ip duplicates could be caused by typos or dhcp errors etc., but they do occur from time to time. in rpm-based systems such as centos, the old server with the duplicate ip wins, and the new server will get an error in bringing up the nic (ip address already used). this is somewhat harmless because we can just fix the system that is coming up. ubuntu only the other hand happily grabs the used ip for itself and leave the old server/device without a valid ip. this is the more dangerous behavior because it causes outages. what i want is to change the ubuntu behavior to that of the centos/rhel so would appreciate any help.

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >