Search Results

Search found 1317 results on 53 pages for 'sata'.

Page 40/53 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe driver tg3 will not install?

    - by Pete
    aries@aries-laptop:~$ sudo ifconfig eth0 up eth0: ERROR while getting interface flags: No such device aries@aries-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9641] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:170b] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7800] (rev 40) 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:16.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:16.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10) 01:00.1 SD Host controller [0805]: Broadcom Corporation Device [14e4:16bc] (rev 10) 01:00.2 System peripheral [0880]: Broadcom Corporation Device [14e4:16be] (rev 10) 01:00.3 System peripheral [0880]: Broadcom Corporation Device [14e4:16bf] (rev 10) 02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4358]

    Read the article

  • Drivers for NVIDIA 520M not working in Ubuntu 12.04

    - by Don
    I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

    Read the article

  • Gateway ZA8 Netbook graphics Issue

    - by Hansel
    The graphics keep tearing and are barely usable anytime I try to use my Netbook. And I did a full install with Ubuntu so I'm pretty much stuck. These are the specs of the Netbook: Processor AMD Athlon™ 64 L110 Single-Core Processor (1.2GHz, 800MHz FSB, 512KB L2 Cache)6 Operating System Genuine Windows Vista® Home Basic (32-bit) with SP1 Display 11.6" HD WXGA Ultrabright™ LED-backlit Display (1366 x 768 resolution, 16:9 aspect ratio)7 Memory 2048MB DDR2 533MHz SDRAM Single Channel Memory8 Hard Drive 250GB SATA hard drive2 Color Classic and Elegant Design with Cherry Red finish Wireless Network 802.11b/g Wi-Fi CERTIFIED®3 Adapter AC Adapter Application Software Microsoft® Works, Microsoft® Money Essentials, Microsoft® Office Home and Student 2007 (60-day complimentary trial period)1 Battery 6-Cell Lithium Ion (5200mAh) Chassis Chassis with ATI Radeon® X1270 Graphics and AMD RS690E Chipset8 Dimensions (Box) 3.1" (H) x 14.8" (W) x 10.1" (D) or 80mm (H) x 376mm (W) x 256mm (D) Dimensions (System) 1.03" (H) x 11.26" (W) x 7.99" (D) or 26.4mm (H) x 286mm (W) x 203mm (D) External Ports (3) USB 2.0, VGA Connector Keyboard and Mouse Keyboard with Multi-Gesture Touchpad Media Card Reader Multi-in-1 Digital Media Card Reader (Memory Stick®, Memory Stick Pro™, MultiMediaCard, Secure Digital™, xD-Picture Card™) Network 10/100 Ethernet LAN (RJ-45 port) What can I do?

    Read the article

  • Network and Storage Devices Throughput Chart

    - by zroiy
    With all of the different storage and network devices that surround our day to day life, understanding these devices data transfer speeds can be somewhat confusing. Think about trying to identify your weakest link in the a chain that starts with an external USB hard drive (or a flash drive) that's connected to a 802.11g wifi router, can you quickly come up with an answer of where's the bottle neck in that chain , is it the router or the storage devices ? . Well, the following chart should give you an idea understanding different devices, protocols and interfaces maximum throughput speeds. Though these numbers can fluctuate (mostly for worse, but sometimes for the better) due to different kind of factors such as OS overhead (or caching and optimization) , multiple users or processes and so on , the chart can still serve to provide basic information on the theoretical throughput different devices and protocols can get to.. Enjoy.  Link to the full size chart   References:http://en.wikipedia.org/wiki/Sata#SATA_revision_1.0_.28SATA_1.5_Gbit.2Fs.29http://en.wikipedia.org/wiki/Usbhttp://en.wikipedia.org/wiki/Usb_3http://en.wikipedia.org/wiki/802.11http://mashable.com/2011/09/21/fastest-download-speeds-infographic/http://en.wikipedia.org/wiki/Thunderbolt_(interface)http://www.computerworld.com/s/article/9220434/Thunderbolt_vs._SuperSpeed_USB_3.0  Icons:http://openiconlibrary.sourceforge.net/gallery2/?./Icons/devices/drive-harddisk-3.png      

    Read the article

  • Troubleshoot broken ZFS

    - by BBK
    I have one zpool called tank in RaidZ1 with 5x1TB SATA HDDs. I'm using Ubuntu Server 11.10 Oneric, kernel 3.0.0-15-server. Installed ZFS from ppa also I'm using zfs-auto-snapshot. The ZFS file system when zfs module loaded to the kernel hangs my computer. Before it I created few new file systems: zfs create -V 10G tank/iscsi1 zfs create -V 10G tank/iscsi2 zfs create -V 10G tank/iscsi3 I shared them through iSCSI by /dev/tank/iscsiX path. And my computer started to hanging sometimes when I used tank/iscsiX by iSCSI, do not know why exactly. I switched off iSCSI and started to remove this file systems: zfs destroy tank/iscsi3 I'm also using zfs-auto-snapshot so I had snapshots and without -r key my command not destroying the FS. So I issued next command: zfs destroy tank/iscsi3 -r The tank/iscsi3 FS was clean and contain nothing - it was destroyed without an issue. But tank/iscsi2 and tank/iscsi1 contained a lot of information. I tried zfs destroy tank/iscsi2 -r After some time my computer hang out. I rebooted computer. It didn't boot very fast, HDDs starts working like a crazy making a lot of noise, after 15 minutes HDDs stopped go crazy and OS booted at last. All seems to be ok - tank/iscsi2 was destroyed. After file systems at the tank was accessible, zpool status showed no corruption. I issued new command: zfs destroy tank/iscsi1 -r Situation was repeated - after some time my computer hang out. But this time ZFS seams not to healed itself. After computer switched on it started to work: loading scripts and kernel modules, after zfs starting to work it hanging my computer. I need to recover else ZFS file systems which lying in the same zpool. Few month ago I backup OS to flash drive. Booting from backed-up OS and import have the same results - OS starts hanging. How to recover my data at ZFS tank?

    Read the article

  • Cannot choose windows installation [closed]

    - by Toby
    Possible Duplicate: Ubuntu 12.4 and XP on Seperate Drives, Dual Boot, How? I've never used Linux before in any form, but was always intrigued, so after a while of deciding whether to risk it I installed Ubuntu 12.04 During the installation I was asked "what would you like to do?" Install Ubuntu as the only operating system, alongside another os, or something else. I chose something else as I wanted to format one of my old 100Gb IDE drives to serve as the partition to install ubuntu on. I formatted this drive with ext4 and made it the root directory for the installation, all ok. I also have on a 1Tb SATA drive two partitions (splitting the disk in 2) one of these contains windows 7 and I did nothing to this drive (and was careful to do so) After the installation finished the computer restarted and gave me no option for choosing operating systems? what have I done wrong how can this be fixed? I would still like to be able to use Win7 for gaming. Any help on this matter would be greatly appreciated. :)

    Read the article

  • How do i disable intel graphics in a hybrid graphics setup?

    - by Eshwar
    Hi, I have a Dell Vostro 3700 version A10. The relevant bits from lspci -v | grep VGA are: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) and 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 330M] (rev a2) so as you can see this is one of those hybrid graphics laptops. Now, I have no interest in any kind of switching. I would like to completely disable the Intel Graphics thats on the processor. I checked in the xorg.log file and it shows that the intel card is in use. from lsmod i see it uses the i915 module. I tried blacklisting that module in /etc/modprobe.d/blacklist.conf but that didn't really work because i still couldn't use the nvidia card for display. I wish there was a BIOS option to disable, but there isn't. Some people have also suggested changing the SATA mode to compatibility, but that does not work either in this case as the intel vga controller still shows up in lspci I tried setting the busid manually in the /etc/X11/xorg.conf file but it still didn't work. It gave me an error that said something along the lines of screen not detected. any bits of xorg.log that you'd like me to attach? So what I am looking for is some solution that allows me to completely disable the use of the intel vga controller. if it was blocked somehow it'd be nice. as if it were not present. Any suggestions? I am desperate here actually. Because I cannot use the HDMI port right now on my laptop for that reason. My guess is this applies to desktops that also have Core i5 processors with onchip graphics as well as dedicated graphics cards. How would they go about solving the problem?

    Read the article

  • Installation Problems & Antivirus

    - by Sagar Walvekar
    We have just migrated our systems from Windows to Ubuntu. We have more than 50 systems previously running Windows XP & Windows 7. After the release of 12.04 we decided to switch to Ubuntu. While we were installing Ubuntu 12.04 on Pentium 4 systems we have faced some issues. We tried it with a USB flash driver & CD. The typical configuration of the system is as follows: Pentium 4 with HT & 512 MB RAM, 40/80 GB IDE / SATA HDD. In windows there were several partitions and data on all the drives in all the systems. We have addressed this by taking backup of the C: drive on other drives & while installing Ubuntu we have just deleted & the C drive & recreated Linux partitions as follows - /root , /Boot, /Home & Swap.(in 10 GB) The problem is that the Linux gets installed without any error. However when I restart the system after the installation the system hangs in while detecting the HDD in BIOS and the system fails to start until I remove the HDD. When I installed the previous Ubuntu version it worked fine, without any hassle. Also if we install Ubuntu 12.04 on same HDD on any other higher capacity system & reconnected to old system it works fine. How can I fix this problem? Also, is there is any Antivirus which will give me real time protection on ubuntu 11 & higher versions with both 32 & 64 Bits?

    Read the article

  • VGA monitor won't detect on NVIDIA Quadro NVS 4200M

    - by tanmayk
    I am on a Dell Latitude E6420 and just installed 12.04. When I plug in my external monitor's VGA cable, the laptop doesn't detect any new monitor. Here's the output of my lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) 01:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 0b:00.0 SD Host controller: O2 Micro, Inc. Device 8221 (rev 05) 0b:00.1 Mass storage controller: O2 Micro, Inc. Device 8231 (rev 03) I tried installing the Quadro NVS 4200M from the nvidia website but got stuck in TTY after the installation finished. Any ideas as to how I can get the external monitor to work? Thanks!

    Read the article

  • Is there a way to disable the hardware on/off switch for the Wireless interface?

    - by avee
    I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

    Read the article

  • Hybrid Graphics on Windows 7/Ubuntu 12.04 Dual Boot

    - by Noob.
    Alright, so here's the situation: I am using an ASUS UL80VT with two graphics cards: Integrated intel graphics and NVIDIA G210M I was running an Ubuntu 12.04 - Windows 7 dual boot (on separate partitions).The machine worked perfectly (including the display drivers) without me needing to install anything special or change any settings. However, my hard drive was corrupted and I lost all my data yesterday, so after it was replaced, I installed Ubuntu 12.04 64x again after installing Windows 7. I booted up Ubuntu after installation, and noticed it was by default using Unity 2D... Gnome 3.4 wasn't working properly either, so I guessed that the NVIDIA G210M driver wasn't installed/working and the OS was instead using the integrated graphics. I checked the "Additional Drivers" thing, but there were no proprietary drivers listed there, so I went to the NVIDIA website, downloaded the driver directly and installed it. I restarted, but there was no change. After this, I read somewhere that I should change my SATA in the BIOS to "Compatible" rather than "Enhanced". This worked fine and fixed the problem (both Unity and Gnome were working perfectly) but then when I tried booting up Windows 7, I recieved the BSOD. So I changed it back to Enhanced, and once again, the NVIDIA 210M graphics isn't working on Ubuntu, but on Windows 7 it is. I do not want to keep changing from Enhanced to Compatible every time I reboot to Ubuntu and neither do I want to simply just use one OS. Note that NVIDIA 210M and integrated graphics work perfectly on Windows 7. Also, I don't care about switching between them, I just want to be able to use the NVIDIA one. What can I do so that both Windows 7 and Ubuntu work and NVIDIA G210M works on Ubuntu?

    Read the article

  • SMART Status Data Interpretation - Disk Utility

    - by Mah
    Last week my external harddisk (Seagate Barracuda 1.5TB in a custom enclosure) showed signs of failure (Disk Utility SMART Pre-failure status - several bad sectors) and I decided to change it. I bought a new HDD (Seagate Barracuda 2TB) and connected it to my Ubuntu box with a SATA to USB cable that could not report SMART status. I copied all the contents of the old HDD to the new HDD (one partition with rsync, the other with parted cp) and then gently replaced the old HDD with the new one inside my aluminum enclosure. For obscure reasons after reconnecting the new HDD through the old enclosure, the Linux box could not detect my partitions. I recovered the partitions with testdisk and restarted the computer. After the restart I checked the SMART status of the new HDD an I get this: Read Error Rate --------------- Normalized 108 Worst 99 Threshold 6 Value 16737944 I got a high value on the Seek Error Rate as well. Wondering why this happens I copied 2 GB directory from one partition to the other and rechecked the SMART status (5 minutes later). This time I got the following: Read Error Rate --------------- Normalized 109 Worst 99 Threshold 6 Value 24792504 As you see there has been an increase in the error rate. I am unable to interpret these numbers. Is my new hard disk already dying? What are the acceptable values in these fields for Seagate hard disks? Then why the assessment is still good? While I could get temperature and airflow temperature data from my old HDD, I can not fetch them for the new one. I noticed that my old hdd had got really hot sometimes. Is it possible that the enclosure is killing the harddisks due to high temperature?... Thanks

    Read the article

  • Upgrade from 11.04 to 12.04 failed - unable to login

    - by Tobias M.
    Yesterday i updgraded from 10.04 to 12.04 via the update-manager. At the end it said "Failed to upgrade due to too many errors". Before that i got a lot of error messages that said packages could ne configured - they were all related to mono. Then it force me to restart. When booting now, I see the pink screen (without logo). After that it turns black and the cursor appears. Then its falshing around between beeing bright and dark and showing the cursor and not showing it. But no way i see the login-screen. At the moment i am not able to boot frm usb since my usb device is too large to be formated to FAT-32 (8GB). This all is happening on this machine: AMD E-350 Processor (2x1,65Ghz) 4GB DDR3 RAM 320GB SATA II Hard drive AMD® Radeon™ HD 6320 Thanks in advance to everyone who trys helping me ;) I have to continue working with data from this machine so i´d be pleased to get my data accessible. Greets ;)

    Read the article

  • 12.04 grub unable to boot on /sde, upgrade-grub and boot-repair failed, please help

    - by VGR
    My problem is I've 4 disks in a raid array listed as sda, sdb... sdd and grub 2 refuses to boot on /sde (the 5th disk, standalone and containing a clean install of 12.04 64 bits). I tried all solutions but all fail. (live CD/USB with grub-setup, also tried repair-grub, and tried also in the "grub rescue" set prefix= etc). I also tried to deactivate the RAID array in the BIOS, but I'd rather not destroy it, and I didn't find a way to make the standalone disk as '/sda1' (this would satisfy grub). In the BIOS, the would-be /sda is the only bootable hard disk; it ends up as /sde and grubs complains. I've made repair-grub issue a pastebin. I always end up in grub-rescue and I'm stuck. I need Ubuntu to boot so that I can add the device array handler for my disks. I can't switch the disks and I can't disconnect the SATA RAID controller. I need: (a) a workaround so that grub starts on /sde; or (b) a way to change the order in which Ubuntu sees the disks, at boot time. I could then provide grub with a /sda1. Thanks a lot. up please thanks a lot it's not the same problem as booting ubuntu from raid. My RAID array serves only of data repository windows had no problem with this configuration

    Read the article

  • I can't install Ubuntu on my Dell Inspiron 15R at all

    - by Kieran Rimmer
    I'm attempting to install Ubuntu 12.04LTS, 64 bit onto a Dell Inspiron 15R laptop. I've shrunk down one of the windows partitions and even used gparted to format the vacant space as ext4. However, the install disk simply does not present any options when it comes to the partitioning step. What I get is a non-responsive blank table As well as the above, I've changed the BIOS settings so that USB emulation is disabled (as per Can't install on Dell Inspiron 15R), and changed the SATA Operation setting to all three possible options. Anyway, the install CD will bring up the trial version of ubuntu, and if I open terminal and type sudo fdisk -l, I get this: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xb4fd9215 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 29044735 14481408 7 HPFS/NTFS/exFAT /dev/sda3 29044736 1005142015 488048640 7 HPFS/NTFS/exFAT /dev/sda4 1005154920 1953520064 474182572+ 83 Linux Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb4fd923d Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive If I type 'sudo parted -l', I get: Model: ATA WDC WD10JPVT-75A (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 41.1MB 41.1MB primary fat16 diag 2 41.9MB 14.9GB 14.8GB primary ntfs boot 3 14.9GB 515GB 500GB primary ntfs 4 515GB 1000GB 486GB primary ext4 Model: ATA SAMSUNG SSD PM83 (scsi) Disk /dev/sdb: 32.0GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 8589MB 8588MB primary Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! I've also tried a Kubuntu 12.04 and Linuxmint install disks, wityh the same problem. I'm completely lost here. Cheers, Kieran

    Read the article

  • 12.04 kernel panic

    - by jesus
    Hello I'm having trouble with Ubuntu 12.04. I downloaded the ISO and burned it into a CD and tried to install Ubuntu, but during the installation process, I got this message Kernel panic-not syncing Attempted to kill init! pid:1,comm:init not tainted 3.2.0-23-generic-pae#36-ubunru then it says switching to console text, and it just hangs in there and nothing happens. I burned another CD with Ubuntu 10.04, but I get a different problem: Ubuntu just gets stuck at the splash screen with the 5 dots which move from red to white, and nothing happens. I was able to boot before with 10.04 but I recently upgraded my computer graphics card and power supply. please see my system specs. Gigabyte GA-M68M-S2P (rev. 2.3) GeForce 7025 Chipset Athalon II x4 640 QuadCore Radeon HD 6870 sapphire OCZ ModXStream Pro 600W Modular High Performance Power Supply 3 hard drives one is IDE and the other two SATA IDE DVD Drive If any one could help me, I'd be most appreciative. If it helps I tried the F6 option like acpi=off noapic nolapic nomodset but i still get kernel panic

    Read the article

  • Setting up Beats audio on HP Pavilion m6

    - by Joel Auterson
    I have an HP Pavilion m6-1054sa laptop, with a Beats subwoofer on the bottom. The normal laptop speakers work fine under Ubuntu but the Beats speaker(s?) does not. Anyone know how to get this working? Here's my lspci output, if it helps... 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames XT/GL [Radeon HD 7600M Series] (rev ff) 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) 07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 0a) 08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

    Read the article

  • Why can't I mount this partition?

    - by Mahmoud20070
    I have two hard disks (80 Giga ide and 500 Giga sata) and i installed Ubuntu 11.10 in hard disk 80 giga and give for him 20 gigabyte after that he saw all partition in two hard drivers until one I see it's health in gparted magic and he can see it but can't check it and this photo the problem is on partition sdb5 and I use this command to mount it from terminal and took me this although that this partition working very well in windows and Ubuntu could mount it before please give me any solution unless format or anything well delete my data because it's very important Before when I checked /dev/sdb5, it had errors - now all program didn't appear any errors unless fdisk -l All of my hard disks can be mounted except Partition D or /dev/sdb5. What can I do? I have tried to mount the partition with many different programs like Gparted, KDE Partition Manager, ntfs-3g from the terminal, and the mount command. All of them said something to the effect of: fuse: mount failed: Device or resource busy ...or... one or more block devices are holding /dev/sdb5 I installed Ubuntu 11.10 again today to see if anything had changed. The partition works fine under Windows.

    Read the article

  • usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

    - by Sandro Dzneladze
    I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

    Read the article

  • Are there Know issues with Ubuntu 11 and socket 1155? acpi=off

    - by James
    Since building my new system I cant get Ubuntu (or any other flavor of Linux) to "run" properly. To boot the live cd I have to "F6" and turn off acpi or the screen halts at a black screen with "boot stuff" written above the blinking curser. When installed I can only boot if I enter repair mode from Grub menu then once in repair mode I choose Boot Normally and it boots to the desktop. Once on the desktop I can "click" (with the mouse) only on one thing...like firefox or "desktop appearance" and the mouse no longer "clicks" on anything else ...its like the computer freezes but the mouse still moves. I end up using the reset button to restart the computer. I was able to update when prompted to do so....but at the end of the update I could not "click" the "finish" and had to use the manual reset button. I have run Ubuntu since v 8... My system specs are: intel i7 2600k ...Graphics disabled in bios... Asus p8z68-v pro.... 16G Kingston HyperX.... 2 EVGA GTX 570 in SLI.... Mouse is a simple Logitech usb Wireless. Ubuntu installed on secondary sata drive.

    Read the article

  • Grub menu will not show the first time I try to boot my ubuntu server 12.04 after it is shutdown for a long time

    - by user211477
    I am running into a booting issue after installing Ubuntu Server 12.04 LTS. Following is the symptom of the problem. SYSTEM DESCRIPTION: Dual core AMD Athlon 64 3 Disks: two SATA (out of which one is SSD) and one PATA. Using LVM for disk partition management. /boot is not under LVM rest of the partitions are. / is on the SSD BIOS boot sequence is correct and points to the disk with /boot and boot loader is installed on this disk. SYMPTOMS: POST messages Blinking cursor on first line then moves to second line Screen flickers then becomes black Everything is unresponsive, hard reboot POST messages will not show up on screen. Monitor displays powersave message Force shutdown machine again. Shutoff power to machine for a few minutes. Restart machine. POST message show up. Grub menu shows up Ubuntu server 12.04 boots normally. From now on Ubuntu server boots normally until machine is shutdown for a long time (for example, 30 mins) Repeat steps 1 through 13 once the machine is started after a long time. WHAT DID I TRY? I read several posts and have tried: radeon.modeset=0 setting the gfxmode edd=0 nolacpi boot-repair Nothing seems to work. In my search I did see only one post with this same symptom. Unfortunately, I am not being able to locate that post anymore. The interesting fact is that with this same machine configuration, if I install Ubuntu Desktop 12.04 then everything works fine. Any help will be appreciated.

    Read the article

  • Ubuntu installer does not show drives

    - by Tanweer Rashid
    I am trying to install Ubuntu 12.04 LTS on my Inspiron laptio, but the installer does not show any drives. My system has a 1TB SATA drive and a 32GB SSD. As far as I can figure, the boot files are kept on the SSD for fast startup (for Windows). During Win7 installation, I had to manually load drivers for RAID controller to see all available drives. Running fdisk -l from the live CD shows the following: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b4782 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 81920 41627647 20772864 7 HPFS/NTFS/exFAT /dev/sda3 41627648 357019647 157696000 7 HPFS/NTFS/exFAT /dev/sda4 357019648 1953517567 798248960 f W95 Ext'd (LBA) /dev/sda5 672415744 1312966655 320275456 7 HPFS/NTFS/exFAT /dev/sda6 1312968704 1953517567 320274432 7 HPFS/NTFS/exFAT Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b474b Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive ubuntu@ubuntu:~$ In the Ubuntu installer, I can only choose /dev/sdb for "Device for boot loader installation", and sdb doesn't show any drives. I cannot select /dev/sda. Any ideas anyone? Thanks.

    Read the article

  • Accessing second hard drive

    - by Jonathan
    Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

    Read the article

  • Can't install Ubuntu, black screen after install

    - by Tyrone
    I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

    Read the article

  • How to migrate user settings and data to new machine?

    - by torbengb
    I'm new to Ubuntu and recently started using it on my PC. I'm going to replace that PC with a new machine. I want to transfer my data and settings to the nettop. What aspects should I consider? Obviously I want to move my data over. What things am I missing if I only copy the entire home folder? This is a home pc (not corporate) so user rights and other security issues are not a concern, except that the files should be accessible on the new machine! Please take into account that the new machine is a nettop that doesn't have an optical drive and doesn't allow me to hook the old SATA disk into it, so any data transfer must be handled via home network (I can have both the old and the new machine turned on and connected to the home LAN) and I have an USB thumbdrive with limited capacity (2GB). This sounds like it might limit the general applicability, but it would in fact make it more general. I'll make this a wiki topic because there could be several "right" answers. Update: Or so I thought. I don't see a choice for that.

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >