Search Results

Search found 13947 results on 558 pages for 'television shows'.

Page 40/558 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Exchange 2010 DAG Automatic Failover Testing/Issue. Not always automatically failing over to health

  - by Richard

  Ok I've got 2 exchange 2010 servers that run client access/hub transport/mailbox roles and one exchange 2010 server running just client access/hub transport roles and acts as my bridgehead. The two mailbox servers are running one database setup in a DAG. Server A shows the DB Mounted and Server B shows Healthy. If I reboot Server A via windows GUI Server B switches from healthy to mounted and I see hardly any interruption in service using Outlook 2007. Server A shows "Service down", then "Failed" then "Healthy" and leaves the DB mounted on Server B. This is how it should work, so far so good. Now if I test Server A being shut down cold, or unplugging both nics from network to simulate failure, Server B switches from Healthy to Mounted and server A switches to "Service Down" but my outlook client never connects to the DB mounted on server B! I can connect to server C (client access/hub transport) and get to my email and even send new email out, but incoming email doesn't deliver until Server A is brought back online and it's DB goes back to Healthy status. So I don't understand why it auto fail-overs when I reboot the server with the mounted DB copy, causing very little outlook 2007 hiccup if any. But when I shutdown or DC the mounted DB server it DOES mount the healthy copy but outlook 2007 clients can't connect.. I hope the picture I'm trying to paint makes some sense, it's driving me a little batty. Any help would be appreciated!

  Read the article

• Cannot run "Automation Anywhere" exe files from console (session 0) on Windows Server 2003 64 bit

  - by Tyler

  I have a simple exe created from an Automation Anywhere task that displays a message box saying hello world. I created this simple exe just for debugging the following issue. When I log in to the console (session 0), and run the Automation Anywhere created executable, it starts to run the task, it shows up in the applications and processes list in the task manager and it shows the two "loading..." windows briefly on the screen, just like normal. But after that, nothing happens... the "hello world" message does not show up. The exe is done and is removed from the application and process list in the task manager. The user I am logged in as, has admin rights and the machine uses "autologin" to automatically log in using this profile when it starts up. If I right click on the exe and "run as" another admin user, the exe runs properly, showing the "hello world" message. Also, if I log into the server in a new session, with the original user (the one that has the problems in session 0), and then run the exe, it runs properly and shows the "hello world". It works fine in any session other than the console session. There is something about the console session that is causing the exe not to run properly... even though it does appear to start running the exe. I should also mention that everything was working fine until Monday at midnight, after which none of the executables could be run successfully. Nothing was changed on the server and no updates were installed. I have since installed windows updates, but that didn't change anything. Looking for some advice on how to get these executables working in the console session again. Thanks!

  Read the article

• Disassemble Asus A2500H

  - by Stijn Sanders

  I have an aged Asus A2500H notebook, with a broken screen and damage to the outside. Since it has a TV-out connection, and is working good otherwise, I have it hooked up to my television as a kind of media-center to play video over LAN. I want to remove the screen as cleanly as possible, but am having trouble opening up the laptop. I've been able to remove the (broken) hinges the screen pivots on. I've also removed any other screws I could spot, but still the casing doesn't come off and seems to be attached by yet more screws I can't access (yet). I've been searching the web for disassemble instructions, I've found some for a number of other brands and models, but not for the Asus A2500H.

  Read the article

• Windows 8 and SMB2 Issues

  - by Rhys Paterson

  We're playing with the consumer preview of Windows 8 and having issues accessing some network shares in our environment. Basically, when I attempt to access a share directly (\[SERVER].[DOMAIN].[NETWORK]\Share$) I get 'An extended error has occured'. The shares reside on an EMC Celerra system. Sorry, I don't really have much more information about it (this is just a little side project). Accessing shares that reside on Windows machines are fine. The Firewall is completley disabled and I am running under full domain administrative credentials. A quick wireshark shows the following group of packets between myself and the server: SMB2 164 NegotiateProtocol Request SMB2 274 NegotiateProtocol Response SMB2 981 SessionSetup Request SMB2 281 SessionSetup Response SMB2 200 TreeConnect Request Tree: \\[SERVER].[DOMAIN].[NETWORK]\[SHARE]$ SMB2 138 TreeConnect Response SMB2 202 Ioctl Request NETWORK_FILE_SYSTEM Function:0x0080 SMB2 131 Ioctl Response, Error: STATUS_INVALID_DEVICE_REQUEST SMB2 126 SessionLogoff Request SMB2 126 SessionLogoff Respons This repeats five times and then (I assume) Windows throws me the above error. A quick Google shows me: 0xC0000010 STATUS_INVALID_DEVICE_REQUEST The specified request is not a valid operation for the target device. Which shows me that NETWORK_FILE_SYSTEM Function:0x0080 request is invalid.. Does anyone know what would cause this? Thanks in advance. Rhys. Edit: FYI - as a workaround, you can disable SMB 2.2 as noted in the EMC thread: sc config lanmanworkstation depend= bowser/mrxsmb10/nsi sc config mrxsmb20 start= disabled This will allow the machine to access the shares. The below answer still stands though :)

  Read the article

• Laptop Asus P50IJ with Intel 4500M GMA output going to a Dell 1907FP external monitor will not allow

  - by ProfessionalAmateur

  Hello - I just purchased an Asus P50IJ-X2 laptop which has a Intel GMA 4500M video card running Windows7. At work I output this laptop to a Dell 1907FP LCD which has a maximum resolution of 1280x1024. Not matter what I do the Windows will not allow the laptop to set a resolution higher than 1024x768 to this LCD monitor. Ive even gone to the extent of downloading PowerStrip (I'd post a link but Im new and can only enter 1 url, if you google for powerstrip its the first option) to create a custom driver for my monitor thinking Windows was having a hard time seeing the available resolutions it would accept. However, powerstrip read the registery and properly sees the monitor and what its capable of so Im now at a complete loss as to why Windows7 will not allow me to set/use a 1280x1024 resolution for this external monitor (as my last laptop did running Vista). The Intel documentation (http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/) indicates that the GMA 4500M should be able to run up to a 2560x1600 max res. The Dell 1907FP specification states it can run up to a 1280x1024 res. But no matter what the computer will not allow me to set higher than a 1024x768. I'm completely baffled but I would really like to be able to output this laptop to a reasonable resolution, 1024x768 makes me feel like I'm using my mom's computer. Any help would be greatly appreciated! Here are some attached images (I apologize for the links, being new I cannot post images) that should help explain this better: Image 1 - This image is from powerstrip which shows the monitors max accepted resolution and at the top right the max res my PC currently allows. (http://imgur.com/agrno.png) Image 2 - This shows my Windows7 resolution picker. (http://imgur.com/3nv6q.png) Image 3 - The 'List all modes' option taken from the Screen Resolution Advanced Settings List All Modes. (http://imgur.com/AMREh.png) Image 4 - Monitor information from registry read by powerstrip, this shows the laptop is able to read the necessary info from the LCD monitor. (http://imgur.com/hUX4D.png)

  Read the article

• APC + FPM memory fragmentation without a reason

  - by palmic

  My setup @ debian 6-testing is: nginx 1.1.8 + php 5.3.8 + php-fpm + APC 3.1.9 Because i use automatic deployment with apc_clear_cache() after deploy, my target is to set up APC to cache all my project (up to 612 php files smaller than 1MB) without files changes checking. My confs: FPM: pm.max_children = 25 pm.start_servers = 4 pm.min_spare_servers = 2 pm.max_spare_servers = 10 pm.max_requests = 500 APC: pc.enabled="1" apc.shm_segments = 1 apc.shm_size="64M" apc.num_files_hint = 640 apc.user_entries_hint = 0 apc.ttl="7200" apc.user_ttl="7200" apc.gc_ttl="600" apc.cache_by_default="1" apc.filters = "apc\.php$,apc_clear.php$" apc.canonicalize="0" apc.slam_defense="1" apc.localcache="1" apc.localcache.size="512M" apc.mmap_file_mask="/tmp/apc-php5.XXXXXX" apc.enable_cli="0" apc.max_file_size = 2M apc.write_lock="1" apc.localcache = 1 apc.localcache.size = 512 apc.report_autofilter="0" apc.include_once_override="0" apc.coredump_unmap="0" apc.stat="0" apc.stat_ctime="0" The problem is i have my APC memory fragmented into 5 pieces at 14,5MB loaded into memory which capacity is 64M. My system memory is 640MB, used about 270MB at most. The http responses lasts about 300ms - 5s. When i switch on apc.stat="1", the responses are about 50ms - 80ms which is quite good, but i cannot understand why is apc.stat="0" so much whorse. The APC diagnostic tool shows "1 Segment(s) with 64.0 MBytes (mmap memory, pthread mutex Locks locking)" in general cache information window so i hope i am right that it's mmap setup which allows tweaking APC shm onto upper values than shows system limit in /proc/sys/kernel/shmmax (my shows 33MB).

  Read the article

• Windows 7 install detects SSD but doesn't list it to install to

  - by Mohamed Meligy

  I'm having quite a weird problem when trying to install Windows 7 SP1 on a new Corsair Force Series 3 SSD to replace a failing HDD in my wife's laptop. When I boot to Windows install, it shows that I have no disks to install to, and tells me to find it a driver to any custom disks I may have. When I go to repair option on the first install window, and then open command prompt Window, I can see the disk using diskpart, and can partition it and format partitions, and then later access them from command prompt and copy files to them. After creating partitions, clicking the "browse" button in Windows install screen that shows no disks available to install Windows to, does show the partitions created by diskpart! So, it does detect the disk and partitions, but refuses to list them as options to install to. People on the Interwebs seem to suggest that just running diskpart "clean" solved the issue for most people, just creating an "active" "primary" partition is al most tutorials suggest. Both got me only as far as described above. The BIOS doesn't have RAID option, changing between "ATA" and "AHCI" (the only available options) didn't make any difference. Might be worth mentioning that this is on a laptop that has Sata III controller for main drive (which I connected the Sata3 SSD to), and Sata II for DVD (which I used for Windows install media). That's what googling brings at least (DELL XPS 15 L502). Any ideas? . Update: The SSD is 460 GB. I tried setting it all as one partition and creating 70-90 GB partition as well (NTFS). More importantly, Windows doesn't list the partition as one it cannot install to (which it does with disks in general when they are small for example). What happens here is different. It doesn't list anything at all. It shows empty list of drives.

  Read the article

• RTL8192SU Linux Issue Installing Driver

  - by s32ialx

  OK I've read tons of fourms of people getting the onboard RTL8192SE working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

  Read the article

• Internet Explorer / Windows 7 does not want to show HTML file from local network drive

  - by Jaanus

  Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

  Read the article

• On a failing hard drive, I am able to view data but unable to copy it - why?

  - by Tom

  I have a 2.5" external hard drive that is failing. It's not making the expected 'clicking' noise that most hard drives and I am able to view the data, but I am unable to actually retrieve the data. I attempted to use SpinRite in order to access the data on the drive, but it didn't like the external drive. When I view the drive's property page, the drive shows that it's used space is at 100% and that it has 0 bytes available; however, the progress indicator under the drive icon in Windows Explorer shows that it's roughly 50% full (which is correct). When I attempt to run Windows' "Error Checking" tool and attempt to "scan for an attempt recovery of bad sectors," the tool begins to run then immediately closes with no error message. I am able to browse the contents of the drive using Windows Explorer. When I begin to try copying any given single file, the copy process begins, an indicator starts, and then the copy fails with no real error message. The Disk Management page in Computer Management under Control Panel also shows this drive has being 'Healthy.' I dropped the drive off at a data recovery store and they said that "The data seems to be intact, but an internal failure is preventing any information from being retrieved." They offered to provide me references to a data recovery specialist. I've also attempted to run CHKDSK on the drive (with and without arguments) but it returns the following error: The type of the filesystem is RAW. CHKDSK is not available for RAW drives. Before going the route of more expensive data recovery, I'm wondering if these symptoms sound familiar to anyone? Other questions... I'm willing to continue trying tools such as TestDisk and/or PhotoRec (as the majority of the data that I'd like to salvage are photos) but how long I should expect either tool to run given approximately 400GB of data? I'm also comfortable using Linux so I welcome any suggestions for utilities or tools and strategies with which you've had success.

  Read the article

• SQL Server Installaion error 0x84B40000

  - by Kurtevich

  I have a problem installing SQL Server 2008 R2. Long time ago I had it installed, and then uninstalled. It was left in "Add/remove programs", but I didn't pay attention on that. I had 2005 installed. And now there is a need to install 2008. I removed 2005 and started installing 2008, but it says that space on C: is not enough. That's when I found out that "Add/remove programs" shows it occupying more than 4 gigabytes, though I used to uninstall it. So I click "Remove", it shows all those many screens and validations, shows that removal completed, but the size of Program Files folder is still more than 4 GB. I removed (from "Add\remove programs" everything that had "SQL Server" in it's name, but that main "SQL Server 2008" item is still there and still 4 GB and uninstalling does nothing. Because installation of SQL Server did not show existing instances, and I don't see any running services related to SQL server (well, almost any, more details in the end), I though that this folder contains just some leftover staff and data and deleted it manually. Then agreed to removing of the item in "Add/remove programs" and everything looks clean. Now every time I try to install SQL Server (even in the minimum configuration), I receive the following error: SQL Server Setup has encountered the following error: The specified credentials that were provided for the SQL Server service are not valid. To continue, provide a valid account and password for the SQL Server service. Error code 0x84B40000. What is this service mentioned here? This error looks like I'm trying to add features to existing server and it can't login. But the setup didn't ask me for any credentials, except one username that couldn't be changed. Here are the services shown that can be related, both disabled and pointing to non-existing executables: SQL Active Directory Helper Service SQL Full-text Filter Daemon Launcher (MSSQLSERVER) I understand that this must be because of my manual deletion, but is there a way to clean it up now?

  Read the article

• Computer turns off unexpectedly

  - by Shahar

  My computer turns itself off unexpectedly after some time of use. It appears that this might be temperature related, but not for sure. I installed 2 tools that monitor temperature: SpeedFan and CPU Thermometer. The only definite finding is that there is a sensor (labelled temp1 in SpeedFan and CPU in CPU thermometer), which shows a temperature of 108C a second before the computer powers down. Until that moment, this sensor shows a constant temperature of 40C. I can usually reproduce the shutdown by viewing a few movies together, which cause another sensor (labelled CPU in SpeedFan) to go up to 60sC, but I do experience the problem even at times when this sensor remains low and cool. It does seem that the problem is more frequent if the computer is turned back on immediately after shutdown, but not always. I have had other hardware problems recently, which might be related: My hard disk heated up. I installed a fan on it, which worked to reduce the heat. The hard disk sensor shows around 40C. I had occasional blue screens and hard disk failures. Replacing the power supply seems to solve both these issues, but then this powerdown problem began appearing. I would appreciate any suggestions as to how to determine where the fault is, or what needs to be replaced.

  Read the article

• NetApp NDMP backup with BE 2010 R2 works, restore fails

  - by uuwe

  Hi, I'm having some issues with a new Backup Exec 2010 R2 installation. I configured a NetApp FAS2020 as an NDMP device and want to backup files from the NAS to a tape drive connected to my backup server. I set up ndmpd according to this document (http://www.symantec.com/business/support/index?page=content&id=TECH48957) and created a separate backup user (http://filers.blogspot.com/2006/09/setting-veritas-netbackup-with-non.html). Backup works perfectly, but restoring any file gives me an authentication failed error. The NDMP device has a "global" ndmp user configured in the device tab (tried this with the newly created ndmpd backup user and the netapp root) and I can also configure separate resource credentials in the BE restore job. I have tried setting the same accounts for the "global" ndmp device and the restore credentials and have also tried setting different accounts for them. NDMP debug level is at 5 and this is what shows up in /etc/messages. The session is closed immediately after it has been granted. 16:12:07 PST [Java_Thread:info]: ndmpdserver: ndmpd.access allowed for version = 4, sessionId = 51, from src ip = 192.168.11.17, dst ip = FAS2020-1/192.168.11.75, src port = 50857, dst port = 10000 16:12:07 PST [Java_Thread:info]: Ndmpd51: ndmpd session closed successfully for version = 4, sessionId = 51, from src ip = 192.168.11.17, dst ip = FAS2020-1/192.168.11.75, src port = 50857, dst port = 10000 Running wireshark on the backup server doesn't produce much. It shows a SYN - SYN/ACK - NDMP CONNECT_CLOSE Request from the backup server. The Resource Credentials for the restore job behave very oddly. If I enter NDMP credentials and do "Test All" it fails. If I use my regular domain backup account, it is successful. There are no failed or succeeded logons in the NetApp ndmp log and tracing this check shows that it doesn't even connect to the NAS. This makes me think that this is more likely flaky BE behaviour rather than misconfiguration of the NAS. Here is the options ndmp output: FAS2020-1 options ndmp ndmpd.access all ndmpd.authtype challenge ndmpd.connectlog.enabled on ndmpd.enable on ndmpd.ignore_ctime.enabled off ndmpd.offset_map.enable on ndmpd.password_length 16 ndmpd.preferred_interface disable ndmpd.tcpnodelay.enable off

  Read the article

• How do I fix a custom Event Viewer Log that merges automatically with the Application log?

  - by NightOwl888

  I am trying to create a custom event log for a Windows Service on Windows Server 2003. I would like to name the custom log "(ML) Startup Commands". However, when I add a registry key with that name to HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\, it adds a log but shows the exact same events that are in the Application log when looking in the event viewer. If I add a registry key with the name "(ML) Startup Commands 2" to the event log, it shows a blank event log as expected. In fact, any other name will work correctly except for the one I want. I have searched through the registry for other keys with the string "(ML)" and removed all other references to this key name, however I continue to get merged results in the viewer when I create a key with this name. My question is, how can I fix the server so I can create a custom event log with this name that shows only the events from my application, not the events from the default Application event log that is installed with Windows? Update: I rebooted the server and woudn't you know it, the log started acting normally. I got a strange error message in the Application log: The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I can only hope this error doesn't mean the problem will come back after 86400 seconds. I guess I will have to wait and see.

  Read the article

• RAID Volume is no longer showing in Raid Controller BIOS and in Windows

  - by Gordon

  Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

  Read the article

• ntpd on Fedora Core 6 with high negative time reset values

  - by Mark White

  The basic problem is we have a FC6 server instance running on a virtual machine, and the system time seems to have been slowly varying until it is now causing a problem. The server runs 24/7 and has been up for 155 days. It has been changed to show GMT, and reports the time as (example) 00:15:15 GMT whereas the actual time is 00:00:00 GMT. This is an offset of 915 seconds. selinux has been changed to 'setenforce 0' for testing and I am running as root. I stop the ntpd service and change the time in System|Administration|Date & Time. The time still shows the same with 'date' in bash. There are no error logs. I change the date with 'date --set' in bash. The response confirms the changed date. I run 'date' and the incorrect date is shown. There are no error logs. I start the ntpd service and /var/log/messages shows success with 'time reset -915.720139s'. The date remains unchanged. ntpq -p shows three three time servers all have offsets of around -915 seconds. I stop ntpd service and try 'ntpd -gqx' and get the same result as above - success, but a large negative time reset. I've tried varying combinations of the above, and a few more settings in System|Administration|Date & Time - no change. I just need to reset the system time to GMT. No offset. But I can't wait for ntpd to slew the time over the next few weeks. Any advice is welcome, cheers! Surely this shouldn't be this difficult... Mark...

  Read the article

• Windows XP can use a wired network port, but MacBook (OS X) fails on the same port

  - by Dean Hill

  I wired the Cat5 in my house seven years ago. The wired ports have worked fine with both my Windows XP laptop and MacBook. My wireless network also works fine, but I like to use wired occasionally. One of the Cat5 runs wasn't terminated with a jack, so I recently terminated this wire with a port/jack on the wall end and a standard Cat5 plug on the end that plugs into my router. This is the same setup as my other runs. Unfortunately, the MacBook isn't working well with the new wired port. The OS X Network System Preferences show the IP, Subnet, Router, etc., and everything looks fine. A "netstat -ibd" shows no errors or dropped packets. However, when I open a page in Safari, the status says "Contacting 'www.google.com'" and appears to hang. If I wait for a couple minutes, part of the Google page starts to display, but it is still not the full page load. When I use a Windows XP laptop on the same wired port, everything works fine. An internet speed test shows good results and all web pages load fine. A "netstat -e" under Windows shows no errors. I've used a Cat5 tester, and the cable tests fine (wires 1-8 light up in sequence). I've replaced both the port/jack and the connector twice to make sure I wired things correctly. I'd really like this Cat5 to work with the MacBook (and I'm trying to avoid running a new length of cable). Any ideas what the problem could be?

  Read the article

• Best way to convert episodic DVDs for Windows Media Center?

  - by Roger Lipscombe

  I'm archiving my DVD collection. My goal is to be able to play them back in Windows Media Center. For feature-length DVDs, I'm using AnyDVD and CloneDVD, which is working well. For playing back TV shows (and other episodic content), I'm using Media Browser, which doesn't support a VIDEO_TS folder per episode. It expects the shows to be broken up into one file per episode (e.g. "Willo the Wisp - S01E12.avi"). For this, I'm attempting to use Handbrake, which, for extracting the episodes from DVD (or already-ripped VIDEO_TS folder), is working pretty well. The problem that I have is that the default x264 encoder over-compresses the resulting video stream, which results in hideous artifacts in animated shows. The aforementioned Willo the Wisp is a particularly bad example, because the original DVD is particularly "noisy". If I switch to using the ffmpeg encoder, the artifacts are gone in Windows Media Player, but I can't get the resulting files to play back in Windows Media Center. I see the first frame, and then there's an error message. I've installed the CCCP codec collection, but it doesn't seem to have made any difference. So: what's the best way to convert VIDEO_TS to individual episode files for playback in Windows Media Center?

  Read the article

• CentOS - mdadm raid1 drive won't mount to default location

  - by danny

  I'm running CentOS 5.5, the system, boot, swap, etc. is all on /dev/sda and I have two identical single-partition drives /dev/sdb1 /dev/sdc1 that are configured in RAID1 (using mdadm). It was working fine (configured to mount to /mnt/data in the fstab file) and I recently let yum install a couple of automatic updates without paying attention to what they were, and now it doesn't work. Raid is working fine (dmesg shows it gets loaded correctly). mdstat shows: # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[1] sdb1[0] XXXX blocks [2/2] [UU] unused devices: <none> Additionally, I can mount it anywhere other than its default directory (i.e. the following works, and I can read data off the drives). # mount /dev/md0 /mnt/data2 EXT3-fs warning: mounting fs with errors, running e2fsck is recommended But when I run the following I get: # mount -a mount: /dev/sdb1 already mounted or /mnt/data busy It says nothing is mounted when I try to umount /dev/sdb1 or umount /mnt/data, so I assume it's the second of those errors. However, lsof | grep mnt shows nothing. The weird thing is that I can save files in /mnt/data. So something is obviously mounted there, but when I try to umount it I get the error that nothing is mounted. /etc/mtab doesn't mention any of the partitions or files I am trying to work with, and fstab just has that one line I mentioned above that is supposed to mount my raid partition. Again, it was all working fine until I On Google I've found a few things about dmraid interfering with mdadm after an update, but I yum remove'd dmraid and rebooted and it didn't help. I'm really confused and need to get this working to get on with my work!

  Read the article

• Windows 7 does not recognize hdmi audio output

  - by user30038

  I recently upgraded to Windows 7 on a Dell 545 MT with audio/video output via nVidia 9800 GTX+ to a flat screen television. I have installed/uninstalled/reinstalled all the most recent drivers from nVidia & realtek, but the machine will not recognize the hdmi output as a sound device (as it did previously in Vista). I troubleshot the problem with Dell for over an hour and was then directed to their software specialists who want $130 to fix the issue! Can anyone offer some insights on this? I've searched nVidia and Windows 7 forums w/o success and would really like to get sound coming back through my tv speakers. Many Thanks.

  Read the article

• CPU load, USB connection vs. NIC

  - by T.J. Crowder

  In general, and understanding the answer may vary by manufacturer and model (and driver, and...), in consumer-grade workstations with integrated NICs, does the NIC rely on the CPU for a lot of help (as is typically the case with a USB controller, for instance), or is it fairly intelligent and capable on its own (like, say, the typical Firewire controller)? Or is the question too general to answer? (If it matters, you can assume Linux.) Background: I'm looking at connecting a device (digital television capture) that will be delivering ~20-50 Mbit/sec of data to a somewhat under-powered workstation. I can get a USB 2 High-speed device, or a network-attached device, and am interested in avoiding impacting the CPU where possible. Obviously, if it's a 100Mbit NIC, that's roughly half its theoretical inbound bandwidth, whereas it's only roughly a tenth of the 480 Mbit/second the USB 2 "High Speed" interface. But if the latter requires a lot of CPU support and the former doesn't...

  Read the article

• Eee PC Seashell series netbook screen is cut off at bottom no matter the resolution

  - by Yzmir Ramirez

  I have an Eee PC 1015PE Seashell netbook running Windows 7 Home Premium with an Intel Graphics Media Accelerator 3150 (8.14.10.2230) with a "Generic Non-PnP Monitor" detected. I tried: Changing the resolution (Control Panel = Appearance and Personalization = Display = Screen Resolution) to 1024x768 Updating the video driver (to 8.14.10.2230) Uninstalling the driver and rebooting Pressing the Windows Key + "-" (magnifier) Pressing Ctrl + Mouse Scroll only resizes the desktop items Pressing Fn + F4 shows 1024x600 (which I think is what I should be using, but nothing happens) EDIT: Changed from Landscape to Portrait and it works Attached an External Monitor and when I extend or set as desktop it works only on the External Monitor (shows up as "Generic PnP Monitor in Device Manager) Basically the bottom inch of my desktop is off-screen hiding my start bar, but my wigets are in their proper position (the start bar is not hidden). Pressing Ctrl + Esc shows the start menu but its cut-off. I'm pretty sure I should be using 1024x600 resolution, any advice? What's odd is that this only started happening recently. EDIT2: Here are some screenshots showing the problem: Resized Window to fit: Opened Start Menu - notice it cut off: Maximized window and then scrolled down - notice no Start Menu: I downgraded my graphic driver I downloaded from the Intel Download Center for the Graphic Media Accelerator 3150 (now: 8.14.10.1972) and now my "Generic non-PnP Montior" detects as "Digital Flat Panel (1024x768 60Hz)".

  Read the article

• PC can't detect second RAM installed

  - by kulwinder

  I have PC with 512 MB RAM installed (motherboard manufacture MICRO STAR, chipset P4M800), pc was running very slow so I decided to upgrade the ram. I installed CPU-Z and check the ram installed on the machine, also had a look at the stick installed. 512 MB PC 3200 400 MHz DDR but my mother supports 200 MHz and it was working ok. So I bought 2GB which I checked on manual that it support upto 2 GB Ram. So I installed 2GB PC 3200 400 MHz same as the old one, I plugged in both eventhough motherboard only support upto 2 GB but system spec only shows 512 (deducts 64 MB shared vga memory) I checked on CPU-Z, it detects both, slot 1 512 MB, slot 2 2048 MB, comparing screen for both slots, both the same, volt 2.5, frequency 166 MHz and 200MHz, only difference on those is 2gb ram shows under timings table 133MHz 166 MHz and 200MHz but 512 MB shows only 166MHz and 200MHz. I checked on Google and can't seems to figure out whats wrong with it. If I only plug in 2GB. Pc doesn't boot up like ram not working.With only 512 MB plugged in seems ok. Please help.

  Read the article

• ios7 loops on the "trust this computer" dialog

  - by gcb

  trying to transfer files to the work ipad via my debian7 box. When i plug it on the computer usb port, it shows the dialog about trusting this computer, and the computer shows a gnome alert about the ipad being locked and that i should unlock it and try again. i press "trust" on the ipad and try again on gnome. and it starts again. over and over. endlessly. there are dozen threads about this on apple support forums. no solution. just dozens of "me too" flags. e.g. https://discussions.apple.com/message/23082859#23082859 (44 me-too, 2k views) here is the log/messages i get Oct 23 21:17:39 dotmatrix kernel: [ 1928.517766] usb 2-1.7: USB disconnect, device number 16 Oct 23 21:17:39 dotmatrix kernel: [ 1928.715441] usb 2-1.7: new high-speed USB device number 17 using ehci_hcd Oct 23 21:17:40 dotmatrix kernel: [ 1928.811031] usb 2-1.7: New USB device found, idVendor=05ac, idProduct=12ab Oct 23 21:17:40 dotmatrix kernel: [ 1928.811036] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 23 21:17:40 dotmatrix kernel: [ 1928.811039] usb 2-1.7: Product: iPad Oct 23 21:17:40 dotmatrix kernel: [ 1928.811041] usb 2-1.7: Manufacturer: Apple Inc. Oct 23 21:17:40 dotmatrix kernel: [ 1928.811043] usb 2-1.7: SerialNumber: fec5e0f6a6fa18a936de3c53af661051d290275e Oct 23 21:17:40 dotmatrix mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7" Oct 23 21:17:40 dotmatrix mtp-probe: bus: 2, device: 17 was not an MTP device Oct 23 21:17:43 dotmatrix kernel: [ 1932.346505] usb 2-1.7: USB disconnect, device number 17 If i never press the trust dialog it will stay there until i remove the cable. but the logs shows that it gave up 3sec after the cable was connected.

  Read the article

• Setting Outlook Web Access as default mail client in Firefox

  - by Barton Chittenden

  The company that I work for is nice enough to let me use Linux for work, but they use Outlook. I've been using Outlook Web Access (OWA) as my mail client, which is more or less acceptable. The only problem is that whenever I click on a mailto link or use the "Send Link" menu option in firefox, I'm prompted to use evolution. Since connecting to an exchange server through evolution seems to be sketchy at best, I would like to set OWA as my default mail client. I'm using Firefox 3.6.13 Here's what I've found so far: Default mail client can be found at Edit Menu -> Preferences -> Applications Tab -> mailto When I click on the drop down menu, one of the options is "Application Details" This shows two options by default: Google Yahoo! Mail Each of these shows how to launch that service. For Gmail: https://mail.google.com/mail/?extsrc=mailto&url=%s For Yahoo!: http://compose.mail.yahoo.com/?To=%s I presume that Outlook Web Access has something similar. Based on the googling that I've done so far, I think that this should look something like this: https://<server name>/owa/?cmd=compose... A little experimentation on my part shows that the following will compose a message: https://<email server>/owa/?ae=Item&a=New&t=IPM.Note but I still don't know how to specify recipient, subject or body of the email to be composed... What I want to know is a) does anyone know the URL parameters to compose a mailto in Outlook Web Access, including subject, recipient and body? else b) can someone give me a decent pointer for where to get this information?

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >