Search Results

Search found 72456 results on 2899 pages for 'work experience'.

Page 40/2899 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Can't get Wireless RT2x00usb driver to work, and can't blacklist it

    - by TheLQ
    After a two year hiatus to Linux, I try it again out again. And then I run into to driver issues... I have an old Linksys WUSB54G v4 Wireless USB Adapter. In previous versions I had to use a combination of Ndiswrapper and Wicd to hope of getting it working. In 10.10, apparently there are built in drivers for it. Unfortunately they don't work. Fails to connect to my WPA network, fails to connect to my open unencrypted network. Wicd fails at "Obtaining IP address" or when using static IPs fails at verifying connectivity to network. Getting fed up I tried the ndiswrapper approach. Installed and configured, but still not working, even when blacklisting the rt2570 module. So for some debugging I added some lines to my /etc/modprobe.d/blacklist.conf file blacklist rt2570 blacklist prism54usb blacklist rt2x00lib blacklist rt2x00usb Restart and find this: lordquackstar@quackbeast:/etc/modprobe.d$ lsmod | grep rt2 rt2500usb 18049 0 rt2x00usb 9779 1 rt2500usb rt2x00lib 27275 2 rt2500usb,rt2x00usb led_class 2633 1 rt2x00lib mac80211 231541 2 rt2x00usb,rt2x00lib cfg80211 144470 2 rt2x00lib,mac80211 Seems to be ignored... Tried this: lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00usb ERROR: Removing 'rt2x00usb': Resource temporarily unavailable lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00lib ERROR: Removing 'rt2x00lib': Resource temporarily unavailable and couldn't connect. Restarted and was back to the same modules loading. Maybe there's something in the log: lordquackstar@quackbeast:/etc/modprobe.d$ tail -n100000 /var/log/syslog | grep rt2 Dec 13 19:01:15 quackbeast kernel: [ 23.698056] Registered led device: rt2500usb-phy0::radio Dec 13 19:01:15 quackbeast kernel: [ 23.698140] Registered led device: rt2500usb-phy0::quality Dec 13 19:01:15 quackbeast kernel: [ 23.701680] usbcore: registered new interface driver rt2500usb Dec 13 19:01:15 quackbeast NetworkManager[855]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Dec 13 19:17:47 quackbeast kernel: [ 23.521759] Registered led device: rt2500usb-phy0::radio Dec 13 19:17:47 quackbeast kernel: [ 23.521824] Registered led device: rt2500usb-phy0::quality Dec 13 19:17:47 quackbeast kernel: [ 23.524740] usbcore: registered new interface driver rt2500usb Dec 13 19:17:47 quackbeast NetworkManager[798]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Seems to be autoloading. So this means that even if I pull it out, remove the module, and get it working, it still won't work when its plugged in all the time. More info: lordquackstar@quackbeast:/etc/modprobe.d$ sudo lshw -C Network *SNIP* *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:12:17:9b:f3:1e capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=2.6.35-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg USB: lordquackstar@quackbeast:/etc/modprobe.d$ lsusb | grep -i rt Bus 001 Device 003: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB] Any suggestions on how to either fix the rt2x00usb driver or permanently block it from loading? Note that I already have ndiswrapper installed

    Read the article

  • Finding work as a college student

    - by lightburst
    I'm a 3rd year CS student. I'm currently really, really, bored and tired of cheap school programming(I go to a fairly respectable(albeit not top) university in my country, but, really, it's not MIT) so I've been thinking about getting a part-time dev job for a long while now. I'm not some hotshot programmer or anything, but "Add/Delete XYZ class objects to list" or "Do this web feature/pattern in PHP" does get old after a few semesters. I also only learned(heard?) of programming when I entered college, so the duration of me being in contact with any code is short. I can't really apply as an intern as I have not accumulated the necessary credits yet to do that so I was thinking of selling myself as a part-time dev. I still need to go to school, and don't want to subject myself to living two lives. Plus, I think I'd have better chances considering my lack of things to write on the resume. The only language I know at heart is C (I've written several pointer-oriented stuff on my freshman year, which is apparently pretty leet(for some reason), or so Joel says. That sort of boosted my morale a bit) but I've worked with several other languages only for the sake of course work such as C#/Java/PHP/ASM. My only user-worthy project was a recursive quicksort simulator I wrote for class using GTK+ that used a textbox to output the progress. I also have not taken the compiler theory class yet, or my thesis. All that being said, I wonder if any legitimate software company(big or small) would hire somebody like me considering all that. If there are companies that do accept anybody like me, would I be doing programming or maybe just be a tester or something? Would anybody hire me as a dev at all? I know I don't have much(not even a degree) but what I lack in experience, I compensate with interest? I am less interested in websites and 'management' software(no offense or anything. also, most of the places here ONLY have those), and more into 'process driven'(I'm not sure how to call it) and system software. I have my eyes on a startup that sells basically an extension of Google Drive, but I feel like I'm too 'risky' for them. Oh, I'm also 19 if that means anything. We're not K-12 so kids go to college earlier than in the US.

    Read the article

  • What makes a great place to work

    - by Rob Farley
    Co-incidentally, I’ve been looking for office space for LobsterPot Solutions during the same few days that Luke Hayler ( @lukehayler ) has asked for my thoughts (okay, he ‘tagged’ me) on what makes a great place to work . He lists People and Environment, and I’m inclined to agree, but with a couple of other things too. I have three children. Two of them (both boys) are in school, but my daughter is only two. For the boys’ schools, we quickly realised that what they need most is a feeling of safety...(read more)

    Read the article

  • Finding an SEO Service Provider to Work With

    SEO Companies are dime a dozen. With so many SEO companies out there, there should not be any issue finding someone to work with. However, if you are looking to get an SEO company that is reasonably price but at the same time is skilled, you may have to look hard.

    Read the article

  • What makes a great place to work

    - by Rob Farley
    Co-incidentally, I’ve been looking for office space for LobsterPot Solutions during the same few days that Luke Hayler ( @lukehayler ) has asked for my thoughts (okay, he ‘tagged’ me) on what makes a great place to work . He lists People and Environment, and I’m inclined to agree, but with a couple of other things too. I have three children. Two of them (both boys) are in school, but my daughter is only two. For the boys’ schools, we quickly realised that what they need most is a feeling of safety...(read more)

    Read the article

  • Install of mod_proxy to get ProxyPass to work

    - by Lance Roberts
    I've been trying to follow these instructions, so that I could get the Citadel mail server to work alongside Apache, but I get an error when I try to restart Apache: Invalid command 'ProxyPass', ... I was told in the Apache docs that this is from the mod_proxy module, but apt-get install mod_proxy gives E: Couldn't find package mod_proxy, and I was unable to find it on the big list on the Apache site. What do I need to do to get the ProxyPass working in Ubuntu 10.04 TLS?

    Read the article

  • Search Engine Optimisation Takes Time - Why You Should Give Your Campaign a Chance to Work

    Being an SEO company or consultancy, it is quite often very difficult, if not near impossible, to set expectations that the client can understand, especially when asking for guarantees or time scales. An SEO campaign can really take three months of solid and hard work to really show the impact, although you can start to see improvements within a couple a of days if you are doing things correctly.

    Read the article

  • Tiny program to register work hours

    - by amin
    Hi dear ubuntu users. I'm searching for a tiny application to register my working hours so when I come to work and power on my pc it register my entrance and as a power off my pc it register me left. I know it's as simple as adding a note in gedit but I want it automated, phproject has a timer application as you start a task you push start and as you finish calculate time to register fot task , I'm searching for such small timer. thanks

    Read the article

  • Pulling changes from master to my work branch?

    - by Utkarsh Sinha
    There's two of us working on something. We're using this branch structure master dev-A dev-B We both work on separate branches (dev-A,B) and whenever we're done - we promote our changes to master. But the drawback of this is we can't get changes the other developer makes. Everything exists in the master tree - but we can't get the latest updates the other developer made. Is there a way to resolve this or should we change our branch structure (per feature?)?

    Read the article

  • Nvidia GT218 repository drivers don't work

    - by user1042840
    I upgraded all packages with sudo apt-get upgrade command on my Ubuntu 10.04 box and I have Ubuntu 12.04 3.2.0-29-generic-pae now. I have two monitors and the following GPU: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 300] (rev a2) After upgrading to 12.04, I somehow lost my previous setup with one common workspace stretched across two monitors. When Ubuntu starts only one monitor is on. I can see the message on the active monitor: Not optimum mode. Recommended mode: 1680x1050 60Hz I used Nvidia proprietary drivers on 10.04 but now jockey-text --list shows: xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Disabled, Not in use) xorg:nvidia_current_updates - NVIDIA accelerated graphics driver (post-release updates) (Proprietary, Enabled, Not in use) When I run sudo nvidia-settings it says You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.' I typed nvidia-xconfig and rebooted, but jockey-text --list says the same after the reboot: Not in use. The same with nvidia-current - Enabled but Not in use. I also tried nvidia-173 but I ended up in tty immediately at startup so I removed it. I used to have some problems with Nvidia proprietary drivers on 10.04, I had to put paths to EDID files in /etc/X11/xorg.conf explicitly, but the resolution was as recommended and both monitors were working. If I understand correctly, nouveau drivers are used now by default because the resolution is still quite high, definitely not 800x600, xrandr showed: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 66.0* 1280x1024 76.0 1024x768 76.0 800x600 73.0 640x480 73.0 640x400 0.0 320x400 0.0 1680x1050_60.00 (0x4f) 146.2MHz h: width 1680 start 1784 end 1960 total 2240 skew 0 clock 65.3KHz v: height 1050 start 1053 end 1059 total 1089 clock 60.0Hz However, colors seem a bit faded and blurry with nouveau drivers. Mouse cursor is invisible if it's placed inside Firefox window, and only one monitor is working. I like open source and if it's possible I'd prefer to use nouveau drivers but a few things should be fixed. I'm curious why nvidia-current drivers from the repository don't work now. I read it has something to do with the new X11 server in Ubuntu 12.04, is it true? How can I get it back to work?

    Read the article

  • Changing $PATH doesn't work?

    - by Ashwini Chaudhary
    I was trying to set PATH in etc/environment file, but after adding the desired path the $PATH is showing an error in terminal: bash: /usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory Here's the content of environment file: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/monty/google_appengine" I was trying to add the path to the folder google_appengine to the PATH as mentioned in this Answer, but it doesn't seem to work.

    Read the article

  • Headphones don't work on an Acer Aspire 5920g

    - by Dave Chatelain
    All the problems I read about were all about the sound not working when they plugged the headphones in. I have the problem that my mic will work but the sound is still played on my built-in speakers. When I look at the sound settings, it doesn't give me any options for headphones. I run 12.04 and never had this problem in Windows. I run it on a Acer Aspire 5920g. Any tips or ideas will be very helpful.

    Read the article

  • SPC 300nc webcam doesn't work on 64-bit Ubuntu 11.10

    - by Felix Elnan
    It seems that this solution to webcam problems in Ubuntu 11.10 doesn't work in the 64 bit version. If i run the following command: "LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so skype" all i get is: "ld.so: object '/usr/lib/x86_64-linux-gnu/libv4l/v4l1compat.so' from LD_PRELOAD cannot be preloaded: ignored." and if i try: "LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libv4l/v4l2convert.so skype" I get the same problem :( Does anyone have a solution?

    Read the article

  • A Day at Work in the YouTube Complaints Department [Video]

    - by Asian Angel
    If you think reading the comments on YouTube videos can be bad at times, then you should be very thankful that you do not have to work in the YouTube complaints department… Note: Video contains some language that may be considered inappropriate. YouTube Complaints! [via Neatorama] How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

    Read the article

  • JCP.next.3: time to get to work

    - by Patrick Curran
    As I've previously reported in this blog, we planned three JSRs to improve the JCP’s processes and to meet our members’ expectations for change. The first - JCP.next.1, or more formally JSR 348: Towards a new version of the Java Community Process - was completed in October 2011. This focused on a small number of simple but important changes to make our process more transparent and to enable broader participation. We're already seeing the benefits of these changes as new and existing JSRs adopt the new requirements. However, because we wanted to complete this JSR quickly we deliberately postponed a number of more complex items, including everything that would require modifying the JSPA (the legal agreement that members sign when they join the organization) to a follow-on JSR. The second JSR (JSR 355: JCP Executive Committee Merge) is in progress now and will complete later this year. This JSR is even simpler than the first, and is focused solely on merging the two Executive Committees into one for greater efficiency and to encourage synergies between the Java ME and Java SE platforms. Continuing the momentum to move Java and the JCP forward we have just filed the third JSR (JCP.next.3) as JSR 358: A major revision of the Java Community Process. This JSR will modify the JSPA as well as the Process Document, and will tackle a large number of complex issues, many of them postponed from JSR 348. For these reasons we expect to spend a considerable amount of time working on it - at least a year, and probably more. The current version of the JSPA was created back in 2002, although some minor changes were introduced in 2005. Since then the organization and the environment in which we operate have changed significantly, and it is now time to revise our processes to ensure that they meet our current needs. We have a long list of topics to be considered, including the role of independent implementations (those not derived from the Reference Implementation), licensing and open source, ensuring that our new transparency requirements are implemented correctly, compatibility policy and TCKs, the role of individual members, patent policy, and IP flow. The Expert Group for JSR 358, as with all process-change JSRs, consists of all members of the Executive Committees. Even though the JSR has just been filed we started discussions on the various topics several months ago (see the EC's meeting minutes for details) and our EC members - including the new members who joined within the last year or two - are actively engaged. Now it's your opportunity to get involved. As required by version 2.8 of our Process (introduced with JSR 348) we will conduct all our business in the open. We have a public java.net project where you can follow and participate in our work. All of our deliberations will be copied to a public Observer mailing list, we'll track our issues on a public Issue Tracker, and all our documents (meeting agendas and minutes, task lists, working drafts) will be published in our Document Archive. We're just getting started, but we do want your input. Please visit us on java.net where you can learn how to participate. Let's get to work...

    Read the article

  • How SEO Services Work to Improve Your Online Popularity

    There are assorted SEO Services available to help boost your online popularity. You might not know it but all these Internet Marketing strategies work together to make sure you appear on search engines, increase your rankings to outdo your competition, and of course, make a name for yourself on the Web.

    Read the article

  • Secrets to How Search Engines Work and How it Affects Your Marketing Online

    Successful Internet marketers will understand the importance of having a good ranking in the search engines. With a good ranking you have the potential to have hundreds or even thousands of visitors every day which can lead to increased sales and income. Learning to use SEO and use it well will help you to become successful as a marketer. Every successful marketer has mastered SEO. Firstly, you need to understand how the search engines work.

    Read the article

  • Making CopySourceAsHtml add-on work with VS2010

    - by DigiMortal
    As there are still bloggers who use CopySourceAsHtml add-on for Visual Studio to get syntax highlighted code to their blog posts and there is no guidance in CSAH site how to make it work with Visual Studio 2010 I will give my guidance here. Almost all code in this blog is syntax highlighted by this add-on (read more from my post Visual Studio add-in: CopySourceAsHTML). Last version of CSAH is available for VS2008 but it is easy to make it work with VS2010. Just follow these steps. Close VS2010 if it is opened. Goto folder MyDocuments\Visual Studio 2010. Move to AddIns subfolder (create it if there is no such subfolder). Create file called CopySourceAsHtml.AddIn and open it in text editor. Paste the following XML to editor:   <?xml version="1.0" encoding="utf-8" standalone="no"?> <Extensibility xmlns="http://schemas.microsoft.com/AutomationExtensibility"> <HostApplication> <Name>Microsoft Visual Studio Macros</Name> <Version>10.0</Version> </HostApplication> <HostApplication> <Name>Microsoft Visual Studio</Name> <Version>10.0</Version> </HostApplication> <Addin> <FriendlyName>CopySourceAsHtml</FriendlyName> <Description>Adds support to Microsoft Visual Studio 2010 for copying source code, syntax highlighting, and line numbers as HTML.</Description> <Assembly>JTLeigh.Tools.Development.CopySourceAsHtml, Version=3.0.3215.1, Culture=neutral, PublicKeyToken=bb2a58bdc03d2e14, processorArchitecture=MSIL</Assembly> <FullClassName>JTLeigh.Tools.Development.CopySourceAsHtml.Connect</FullClassName> <LoadBehavior>1</LoadBehavior> <CommandPreload>0</CommandPreload> <CommandLineSafe>0</CommandLineSafe> </Addin> </Extensibility> Save file and close it. Run VS2010 and activate add-on if it is not activated yet. That’s it. If you are heavy user of CSAH then I recommend you to bookmark this post. :)

    Read the article

  • How does the Ubuntu upgrade process work?

    - by IDWMaster
    How does Ubuntu upgrade seamlessly to a newer distribution, while the operating system is still running? I'm upgrading from 10.10 to 11.04, and I've upgraded several times before, and it's as simple as running update-manager -d and downloading and installing them, then rebooting. How exactly does this work though? How is the upgrade manager able to update the operating system while it is still in use?

    Read the article

  • Reasons to Use a Work Order Software System

    Keeping track of the bottom line has never been more critical than in these trying economic times. That';s why many companies are choosing to use a work order system to better keep track of jobs and m... [Author: Belinda Verducci - Computers and Internet - June 05, 2010]

    Read the article

  • SEO Work For Small Business - The Importance of Prioritising This

    Prioritising your search engine optimisation (SEO) work is a decisive factor that will lead to the success of your small business. Even if SEO is just part of your entire marketing plan, it still has enormous significance as it is the one that generates traffic to your website. This traffic is where you will be able to get prospects, who will eventually be converted into clients.

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >