Search Results

Search found 11618 results on 465 pages for 'shared storage'.

Page 401/465 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

• SSAS Cube reprocessing fails - then succeeds if I try again

  - by EdgarVerona

  So I'm basically brand new to the concept of BI, and I've inherited an existing ETL process that is a two step process: 1) Loads the data into a database that is only used by the cube processing 2) Starts off the SSAS cube processing against said database It seems pretty well isolated, but occasionally (once a week, sometimes twice) it will fail with the following exception: "Errors in the OLAP storage engine: The attribute key cannot be found" Now the interesting thing is that: 1) The dimension having the issue is not usually the same one (i.e. there's no single dimension that consistently has this failure) 2) The source table, when I inspect it, does actually contain the attribute key that it says could not be found And, most interestingly... 3) If I then immediately reprocess the dimensions and cubes manually through SSMS, they reprocess successfully and without incident. In both the aforementioned job and when I reprocess them through SSMS, I am using "ProcessFull", so it should be reprocessing them completely. Has anyone run into such an issue? I'm scratching my head about it... because if it was a genuine data integrity issue, reprocessing the cube again wouldn't fix it. What on earth could be happening? I've been tasked with finding out why this happens, but I can neither reproduce it consistently nor can I point to a data integrity problem as the root cause. Thanks for any input you can provide!

  Read the article

• Unregistering COM dll with a C# Setup Project

  - by lb

  Hi All. I've been stuck on this one for a while. I'll try explain in the simplest terms and at the best of my knowledge. I will honour any help. I've got a C# project which uses a VB6 compiled ActiveX DLL that I'm constantly updating. I compile the setup project, send it to the client and they run the setup. When building the updated setup project, I would increase the 'Version' of the setup project so it wouldn't bother with 'Another version is already installed'. What started happening after a few updates I began to notice the DLL would not be updated to the new version in the installer. The client computer had the original DLL both installed and registered. First symptom: method not found exceptions from the client C# code. This is not a shared DLL and only this application needs it. I've noticed that when uninstalling the application (through the usual procedure) the DLL is also not removed from the application folder although I would set this file's property 'Permanent' to false. The registration entries in the registry are mantained also. I do update in VS6.0 the version of the DLL (usually increase the build number) before building it. Then in VS2008, I remove it from the References, and add it again from the 'Browse tab', without re-registering it on my dev machine and adding it from the COM tab. I've thought of these options. Custom step in Setup project to regsvr32.exe /u 'hardcoded path of my dll' at uninstall (ugly) Somehow find out how the 'Isolate' property can work for me without registering Find out how to execute setup project 'Conditions' that would actually check the version of the library and to update the file accordingly at every install) Any help would be incredibly welcome.

  Read the article

• Database Design Question regaurding duplicate information.

  - by galford13x

  I have a database that contains a history of product sales. For example the following table CREATE TABLE SalesHistoryTable ( OrderID, // Order Number Unique to all orders ProductID, // Product ID can be used as a Key to look up product info in another table Price, // Price of the product per unit at the time of the order Quantity, // quantity of the product for the order Total, // total cost of the order for the product. (Price * Quantity) Date, // Date of the order StoreID, // The store that created the Order PRIMARY KEY(OrderID)); The table will eventually have millions of transactions. From this, profiles can be created for products in different geographical regions (based on the StoreID). Creating these profiles can be very time consuming as a database query. For example. SELECT ProductID, StoreID, SUM(Total) AS Total, SUM(Quantity) QTY, SUM(Total)/SUM(Quantity) AS AvgPrice FROM SalesHistoryTable GROUP BY ProductID, StoreID; The above query could be used to get the Information based on products for any particular store. You could then determine which store has sold the most, has made the most money, and on average sells for the most/least. This would be very costly to use as a normal query run anytime. What are some design descisions in order to allow these types of queries to run faster assuming storage size isn’t an issue. For example, I could create another Table with duplicate information. Store ID (Key), Product ID, TotalCost, QTY, AvgPrice And provide a trigger so that when a new order is received, the entry for that store is updated in a new table. The cost for the update is almost nothing. What should be considered when given the above scenario?

  Read the article

• Avoid the problem with BigDecimal when migrating to Java 1.4 to Java 1.5+

  - by romaintaz

  Hello, I've recently migrated a Java 1.4 application to a Java 6 environment. Unfortunately, I encountered a problem with the BigDecimal storage in a Oracle database. To summarize, when I try to store a "7.65E+7" BigDecimal value (76,500,000.00) in the database, Oracle stores in reality the value of 7,650,000.00. This defect is due to the rewritting of the BigDecimal class in Java 1.5 (see here). In my code, the BigDecimal was created from a double using this kind of code: BigDecimal myBD = new BigDecimal("" + someDoubleValue); someObject.setAmount(myBD); // Now let Hibernate persists my object in DB... In more than 99% of the cases, everything works fine. Except that in really few case, the bug mentioned above occurs. And that's quite annoying. If I change the previous code to avoid the use of the String constructor of BigDecimal, then I do not encounter the bug in my uses cases: BigDecimal myBD = new BigDecimal(someDoubleValue); someObject.setAmount(myBD); // Now let Hibernate persists my object in DB... However, how can I be sure that this solution is the correct way to handle the use of BigDecimal? So my question is to know how I have to manage my BigDecimal values to avoid this issue: Do not use the new BigDecimal(String) constructor and use directly the new BigDecimal(double)? Force Oracle to use toPlainString() instead of toString() method when dealing with BigDecimal (and in this case how to do that)? Any other solution? Environment information: Java 1.6.0_14 Hibernate 2.1.8 (yes, it is a quite old version) Oracle JDBC 9.0.2.0 and also tested with 10.2.0.3.0 Oracle database 10.2.0.3.0

  Read the article

• Django sphinx works only after app restart.

  - by Lhiash

  Hi, I've set up django-sphinx in my project, which works perfectly only for some time. Later it always returns empty result set. Surprisingly restarting django app fixes it. And search works again but again only for short time (or very limiter number of queries). Heres my sphinx.conf: source src_questions { # data source type = mysql sql_host = xxxxxx sql_user = xxxxxx #replace with your db username sql_pass = xxxxxx #replace with your db password sql_db = xxxxxx #replace with your db name # these two are optional sql_port = xxxxxx #sql_sock = /var/lib/mysql/mysql.sock # pre-query, executed before the main fetch query sql_query_pre = SET NAMES utf8 # main document fetch query sql_query = SELECT q.id AS id, q.title AS title, q.tagnames AS tags, q.html AS text, q.level AS level \ FROM question AS q \ WHERE q.deleted=0 \ # optional - used by command-line search utility to display document information sql_query_info = SELECT title, id, level FROM question WHERE id=$id sql_attr_uint = level } index questions { # which document source to index source = src_questions # this is path and index file name without extension # you may need to change this path or create this folder path = /home/rafal/core_index/index_questions # docinfo (ie. per-document attribute values) storage strategy docinfo = extern # morphology morphology = stem_en # stopwords file #stopwords = /var/data/sphinx/stopwords.txt # minimum word length min_word_len = 3 # uncomment next 2 lines to allow wildcard (*) searches min_infix_len = 1 enable_star = 1 # charset encoding type charset_type = utf-8 } # indexer settings indexer { # memory limit (default is 32M) mem_limit = 64M } # searchd settings searchd { # IP address on which search daemon will bind and accept # optional, default is to listen on all addresses, # ie. address = 0.0.0.0 address = 127.0.0.1 # port on which search daemon will listen port = 3312 # searchd run info is logged here - create or change the folder log = ../log/sphinx.log # all the search queries are logged here query_log = ../log/query.log # client read timeout, seconds read_timeout = 5 # maximum amount of children to fork max_children = 30 # a file which will contain searchd process ID pid_file = searchd.pid # maximum amount of matches this daemon would ever retrieve # from each index and serve to client max_matches = 1000 } and heres my search part from views.py: content = Question.search.query(keywords) if level: content = content.filter(level=level)#level is array of integers There are no errors in any logs, it just isnt returning any results. All help would be most appreciated.

  Read the article

• SharePoint 2010 / ASP.Net Integration - Looking for advice

  - by jpennal

  I have been Googling a problem that I have with trying to integrate the web application that I am working on with SharePoint 2010. The web application is a wiki style tool that allows users to log in via forms authentication or WIA against Active Directory and create content for themselves and others. What we would like to do is to allow a user have a page with the content they have created in our web application mixed in with content that they have living on the SharePoint server. For example, they may want to see a list of documents that they have on the SharePoint server mixed in with some of their content. To accomplish this, we would like to take the credentials the user has logged into our web application with (for example MYDOMAIN\jsmith) and be able to query SharePoint for the documents of that same user (MYDOMAIN\jsmith) WITHOUT the user being prompted to re-enter their credentials to access the SharePoint server (we are trying to avoid the double-hop problem) We have come up with some options for how we want to do this, but we are unsure of what the best approach is. For example, we could - Have a global user, shared by all users to get information we need from SharePoint. The downside is that we cannot filter SharePoint content to a particular user - We could store the users credentials when they log in, but that would only work for users authenticating via forms auth and would be a security issue that some users/clients would not like - Writing a SharePoint extension using WCF to allow us to access the information we need, however we'd still have the issue of figuring out how to impersonate the user we want. Neither of these options are ideal and in our investigation we came across the Claims Authentication/STS option which seems like it is trying to solve the problem we are having. So my question is, based on what I have written, is Claims/STS the best approach for us? We have not been able to find much direction on how to use this method to call into SharePoint from a Web Application and pass along the existing credentials. Does anyone have any experience with any of these issues?

  Read the article

• Dealing with Imprecise Drawing in CAD Drawing

  - by Graviton

  I have a CAD application, that allows user to draw lines and polygons and all that. One thorny problem that I face is user drawing can be highly imprecise, for example, a user might want to draw two rectangles that are connected to each other. Hence there should be one line shared by two rectangles. However, it's easy for user to, instead of draw a line, draw two lines that are very close to each other, so close to each other that when look from the screen, you would be mistaken that they are the same line, except that they aren't when you zoom in a little bit. My application would require user to properly draw the lines ( or my preprocessing must be able to do auto correction), or else my internal algorithm would not be able to process the inputs correctly. What is the best strategy to combat this kind of problem? I am thinking about rounding the point coordinates to a certain degree of precision, but although I can't exactly pinpoint the problem of this approach, but I feel that this is not the correct way of doing things, that this will introduce a new set of problem. Any idea?

  Read the article

• Security implications of writing files using PHP

  - by susmits

  I'm currently trying to create a CMS using PHP, purely in the interest of education. I want the administrators to be able to create content, which will be parsed and saved on the server storage in pure HTML form to avoid the overhead that executing PHP script would incur. Unfortunately, I could only think of a few ways of doing so: Setting write permission on every directory where the CMS should want to write a file. This sounds like quite a bad idea. Setting write permissions on a single cached directory. A PHP script could then include or fopen/fread/echo the content from a file in the cached directory at request-time. This could perhaps be carried out in a Mediawiki-esque fashion: something like index.php?page=xyz could read and echo content from cached/xyz.html at runtime. However, I'll need to ensure the sanity of $_GET['page'] to prevent nasty variations like index.php?page=http://www.bad-site.org/malicious-script.js. I'm personally not too thrilled by the second idea, but the first one sounds very insecure. Could someone please suggest a good way of getting this done?

  Read the article

• What do these errors mean? ISOC++ forbids assignment of arrays...

  - by xunlinkx

  I'm trying to compile some code on one of our systems for our DBA...I've edited the makefiles to include the pertinent libraries listed in the documentation, but I keep getting these errors... Can you discern any obvious problems from my command lines in reference to the errors listed? Thank you! make -f /u01/app/banner/ban8/TEST3/links/Makefile_tm_linux64_redhat5_ban8.mk gcc -m64 -D_NOFIXARGPTR -fpic -shared -DTMCILIB_EXPORTS -D_TMUNICODE -I/usr/local/ban_icu -I/usr/local/src/icu/source/i18n/ -I/usr/local/src/icu/source/common/ -I/usr/local/src/icu/source/extra/ustdio/ -I/usr/local/src/icu/source/io -L/usr/lib64 -L/usr/lib -L/usr/local/src/icu/source/data/ -L/usr/local/src/icu/source/data/out/ -L/usr/local/src/icu/source/tools/toolutil/ -L/usr/lib/im/icuconv/ -L/usr/local/lib/ -L. -licui18n -licudata -licuuc -licu-toolutil -licuio msgfmttm.cpp umsgtm.cpp tmcilib.cpp -o /u01/app/banner/ban8/TEST3/general/exe/libtmciuc.so umsgtm.cpp: In function ‘void fixArgPtr(const UChar*, __va_list_tag (*)[1])’: umsgtm.cpp:158: error: array must be initialized with a brace-enclosed initializer umsgtm.cpp:194: error: ISO C++ forbids assignment of arrays umsgtm.cpp: In function ‘int32_t tmumsg_vformat(void*, UChar, int32_t, __va_list_tag*, UErrorCode*)’: umsgtm.cpp:305: error: cannot convert ‘__va_list_tag**’ to ‘__va_list_tag ()[1]’ for argument ‘2’ to ‘void fixArgPtr(const UChar, __va_list_tag (*)[1])’ tmcilib.cpp: In function ‘int tmprintf(TMBundle*, const UChar*, ...)’: tmcilib.cpp:743: error: array must be initialized with a brace-enclosed initializer tmcilib.cpp: In function ‘int tmfprintf(TMBundle*, UFILE*, const UChar*, ...)’: tmcilib.cpp:757: error: array must be initialized with a brace-enclosed initializer tmcilib.cpp: In function ‘int tmsprintf(TMBundle*, UChar*, const UChar*, ...)’: tmcilib.cpp:808: error: array must be initialized with a brace-enclosed initializer

  Read the article

• Maintaining state and data context between requests in ASP.NET + EF4

  - by Nick

  I have a EF4/ASP.NET web application that is structured to use POCOs and generic repositories, based essentially on this excellent article. The application is relatively sophisticated with one page that involves selection and linking of multiple entities to build up a complex user profile. This requires access to multiple entity types (20 or so) and associated repositories across multiple posts. When a repository is first accessed it uses the existing data context if exists, else it creates a new context. The problem is that if the lifetime of the context is only per-request (as suggested in the article) then you have to deal with multiple contexts and the complexity around detaching and attaching entities from contexts. My solution is to share the context between posts by creating a single View Model that includes all required repositories (initialised to share the same context) plus any associated data and store this model in a Session variable, retrieving from Session on subsequent page requests. Therefore maintaining the same context across all posts until the profile is saved. This works fine BUT I am concerned that I don't actually know exactly what is stored in the model session variable or more importantly the size of the Session variable. So two questions I suppose: firstly should I look for a better solution to handle the shared context across posts issue (any suggestions welcome)? And secondly what is actually stored in the Session when it includes a repository plus context? Any help appreciated!

  Read the article

• modifying ajax returned data before showing

  - by Nick

  I'm processing subscribtion form with jQuery/ajax and need to display results with success function (they are different depending on if email exists in database). But the trick is I do not need h2 and first "p" tag. How can I show only div#alertmsg and second "p" tag? I've tried revoming unnecessary elements with method described here, but it didn't work. Thanks in advance. Here is my code: var dataString = $('#subscribe').serialize(); $.ajax({ type: "POST", url: "/templates/willrock/pommo/user/process.php", data: dataString, success: function(data){ var result = $(data); $('#success').append(result); } Here is the data returned: <h2>Subscription Review</h2> <p><a href="url" onClick="history.back(); return false;"><img src="/templates/willrock/pommo/themes/shared/images/icons/back.png" alt="back icon" class="navimage" /> Back to Subscription Form</a></p> <div id="alertmsg" class="error"> <ul> <li>Email address already exists. Duplicates are not allowed.</li> </ul> </div> <p><a href="login.php">Update your records</a></p>

  Read the article

• Reuse Client java Socket in a Java Server

  - by user1394983

  I'm devoloping an Java server two control an android online game. It's possible save the client socket of myserversocket.accept() in a variable in Client class? This are very util because this way, server can communicate with client when server wants and no when client contact server. My actual code are: import java.io.IOException; import java.io.ObjectInputStream; import java.io.ObjectOutputStream; import java.net.ServerSocket; import java.net.Socket; import java.util.ArrayList; import java.util.UUID; import sal.app.shared.Packet; public class Server { private ArrayList<GameSession> games = new ArrayList<GameSession>(); private ArrayList<Client> pendent_clients = new ArrayList<Client>(); private Packet read_packet= new Packet(); private Packet sent_packet = new Packet(); private Socket clientSocket = null; public static void main(String[] args) throws ClassNotFoundException{ ServerSocket serverSocket = null; //DataInputStream dataInputStream = null; //DataOutputStream dataOutputStream = null; ObjectOutputStream oos=null; ObjectInputStream ois=null; Server myServer = new Server(); try { serverSocket = new ServerSocket(7777); System.out.println("Listening :7777"); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } while(true){ try { myServer.clientSocket = new Socket(); myServer.clientSocket = serverSocket.accept(); myServer.read_packet = new Packet(); myServer.sent_packet = new Packet(); oos = new ObjectOutputStream(myServer.clientSocket.getOutputStream()); ois = new ObjectInputStream(myServer.clientSocket.getInputStream()); //dataInputStream = new DataInputStream(clientSocket.getInputStream()); //dataOutputStream = new DataOutputStream(clientSocket.getOutputStream()); //System.out.println("ip: " + clientSocket.getInetAddress()); //System.out.println("message: " + ois.read()); //dataOutputStream.writeUTF("Hello!"); /*while ((myServer.read_packet = (Packet) ois.readObject()) != null) { myServer.handlePacket(myServer.read_packet); break; }*/ myServer.read_packet=(Packet) ois.readObject(); myServer.handlePacket(myServer.read_packet); //oos.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } finally{ if( myServer.clientSocket!= null){ /*try { //myServer.clientSocket.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ } /*if( ois!= null){ try { ois.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } if( oos!= null){ try { oos.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } }*/ } } } public void handlePacket(Packet hp) throws IOException { if(hp.getOpCode() == 1) { registPlayer(hp); } } public void registPlayer(Packet p) throws IOException { Client registClient = new Client(this.clientSocket); this.pendent_clients.add(registClient); if(pendent_clients.size() == 2) { initAGame(); } else { ObjectOutputStream out=null; Packet to_send = new Packet(); to_send.setOpCode(4); out = new ObjectOutputStream(registClient.getClientSocket().getOutputStream()); out.writeObject(to_send); } } public void initAGame() throws IOException { Client c1 = pendent_clients.get(0); Client c2 = pendent_clients.get(1); Packet to_send = new Packet(); ObjectOutputStream out=null; GameSession incomingGame = new GameSession(c1,c2); games.add(incomingGame); to_send.setGameId(incomingGame.getGameId()); to_send.setOpCode(5); out = new ObjectOutputStream(c1.getClientSocket().getOutputStream()); out.writeObject(to_send); out = new ObjectOutputStream(c2.getClientSocket().getOutputStream()); out.writeObject(to_send); pendent_clients.clear(); } public Client getClientById(UUID given_id) { for(GameSession gs: games) { if(gs.getClient1().getClientId().equals(given_id)) { return gs.getClient1(); } else if(gs.getClient2().getClientId().equals(given_id)) { return gs.getClient2(); } } return null; } } With this code i got this erros: java.net.SocketException: Broken pipe at java.net.SocketOutputStream.socketWrite0(Native Method) at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92) at java.net.SocketOutputStream.write(SocketOutputStream.java:136) at java.io.ObjectOutputStream$BlockDataOutputStream.drain(ObjectOutputStream.java:1847) at java.io.ObjectOutputStream$BlockDataOutputStream.setBlockDataMode(ObjectOutputStream.java:1756) at java.io.ObjectOutputStream.writeNonProxyDesc(ObjectOutputStream.java:1257) at java.io.ObjectOutputStream.writeClassDesc(ObjectOutputStream.java:1211) at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1395) at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1158) at java.io.ObjectOutputStream.writeFatalException(ObjectOutputStream.java:1547) at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:333) at Server.initAGame(Server.java:146) at Server.registPlayer(Server.java:120) at Server.handlePacket(Server.java:106) at Server.main(Server.java:63) This error ocurre when second client connect and server try to send an Packet to previous client 1 in function initGame() in this code: out = new ObjectOutputStream(c1.getClientSocket().getOutputStream()); out.writeObject(to_send); my android code is this: package sal.app; import java.io.DataInputStream; import java.io.DataOutputStream; import java.io.IOException; import java.io.ObjectInputStream; import java.io.ObjectOutputStream; import java.net.Socket; import java.net.UnknownHostException; import sal.app.logic.DataBaseManager; import sal.app.shared.Packet; import android.app.Activity; import android.os.Bundle; import android.view.Window; import android.view.WindowManager; public class MultiPlayerWaitActivity extends Activity{ private DataBaseManager db; public void onCreate(Bundle savedInstanceState) { super.requestWindowFeature(Window.FEATURE_NO_TITLE); super.getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN,WindowManager.LayoutParams.FLAG_FULLSCREEN); super.onCreate(savedInstanceState); setContentView(R.layout.multiwaitlayout); db=DataBaseManager.getSalDatabase(this); db.teste(); try { db.createDataBase(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } Socket socket = null; ObjectOutputStream outputStream = null; ObjectInputStream inputStream = null; //System.out.println("dadadad"); try { socket = new Socket("192.168.1.4", 7777); //Game = new MultiPlayerGame(new ServerManager("192.168.1.66"),new Session(), new Player("")); outputStream = new ObjectOutputStream(socket.getOutputStream()); inputStream = new ObjectInputStream(socket.getInputStream()); //dataOutputStream.writeUTF(textOut.getText().toString()); //textIn.setText(dataInputStream.readUTF()); Packet p = new Packet(); Packet r = new Packet(); p.setOpCode(1); outputStream.writeObject(p); /*try { r=(Packet)inputStream.readObject(); } catch (ClassNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ //while(true){ //dataInputStream = new DataInputStream(clientSocket.getInputStream()); //dataOutputStream = new DataOutputStream(clientSocket.getOutputStream()); //System.out.println("ip: " + clientSocket.getInetAddress()); //System.out.println("message: " + ois.read()); //dataOutputStream.writeUTF("Hello!"); /*while ((r= (Packet) inputStream.readObject()) != null) { handPacket(r); break; }*/ r=(Packet) inputStream.readObject(); handPacket(r); //oos.close(); //} /*System.out.println(r.getOpCode()); if(r.getOpCode() == 5) { this.finish(); }*/ } catch (UnknownHostException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } /*finally{ if (socket != null){ try { socket.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } if (outputStream != null){ try { outputStream.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } if (inputStream != null){ try { inputStream.close(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } }*/ //catch (ClassNotFoundException e) { // TODO Auto-generated catch block //e.printStackTrace(); //} catch (ClassNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } } public void handPacket(Packet hp) { if(hp.getOpCode() == 5) { this.finish(); } this.finish(); } } Regards

  Read the article

• How to properly force a Blackberry Java application to install using Loader.exe

  - by Kevin White

  I want to include the Application Loader process in a software installation, to ensure that users get our software installed on their Blackberry by the time our installer software finishes. I know this is possible, because Aerize Card Loader (http://aerize.com/blackberry/software/loader/) does this. When you install their software, if your Blackberry is connected the Application Loader will come up and force the .COD file to install to the device. I can't make it work. Looking at RIM's own documentation, I need to: Place the ALX and COD files into a subfolder here: C:\Program Files\Common Files\Research In Motion\Shared\Applications\ Add a path to the ALX file in HKCU\Software\Research In Motion\Blackberry\Loader\Packages Index the application, by executing this at the command line: loader.exe /index Start the force load, by doing this: loader.exe /defaultUSB /forceload When I execute that last command, the Application Loader comes up and says that all applications are up to date and nothing needs to be done. If I execute loader.exe by double-clicking on it (or typing in the command with no parameters), I get the regular Application Loader wizard. It shows my program as listed, but un-checked. If I check it and click next, it will install to the Blackberry. (This is the part that I want to avoid, and that Aerize Card Loader's install process avoids.) What am I missing? It appears that the Aerize installer is doing something different but I haven't been able to ascertain what.

  Read the article

• Log4Net GetLogger creates rolling files even for the unreferenced files

  - by ybastiand

  Hi, I have a C# solution that contains three executables. I have each of these three executables sharing the same log4net configuration file. At startup of each of the executable, they retrieve a logger (one logger per executable, as per configuration file further below). When one of the executable performs Log.GetLogger(), it creates all the rolling files instead of only the one rolling file that is referred to as appender-ref in the executable's logger configuration. For instance, when I startup my sending daemon executable, it performs Log.GetLogger("SendingDaemonLogger") which creates 3 files Log/RuleScheduler.txt, Log/NotificationGenerator.txt and Log/NotificationSender.txt instead of only the desired Log/NotificationSender.txt. Then when I startup another of the executables, for instance the rule scheduler daemon, this other process cannot write in Log/RuleScheduler.txt because it has been created and locked by the sending daemon process. I am guessing that there may be three different solutions to my problem: The GetLogger should only create the rolling file appenders that are referenced in the config I should have one config file per executable, this way each config file could list only one rolling file appender and starting each of the executable would not create the rolling files of the other daemons. I am however reluctant to do this because some of the configuration (SMTP appender, console appender) is shared between the daemons and I don't want to have duplicate copies to maintain. Unless there is a way to have a config file including another one? Maybe there is a way to configure the rolling file so that concurrent access across processes is allowed? This solution still isn't perfect in my opinion because any of the daemons should not be creating the rolling files of some other daemons. Thanks in advance for your help! I have difficulties for posting the config file properly here (this website interprets as HTML). Please go to the following link for seeing my log4net configuration file: log4Net configuration file

  Read the article

• Rails CSS not Loading using Heroku

  - by eWizardII

  I have the following site set up here on Heroku - http://www.peerinstruction.net/users/sign_up the issue is that I have updated the css yet it is not being actively reflected on the site, it just shows a textbox, with some edited/custom fonts. I have attached the css file in the following gist - https://gist.github.com/f74b626c54ecbb60bbde The signup page controller: !!! Strict %html %head %title= yield(:title) || "Untitled" = stylesheet_link_tag 'application', 'web-app-theme/base', 'web-app-theme/themes/activo/style', 'web-app-theme/override' = javascript_include_tag :defaults = csrf_meta_tag = yield(:head) %body #container #header %h1 %a{:href => "/"} Peer Instruction Network #user-navigation %ul.wat-cf %li .content.login .flash - flash.each do |type, message| %div{ :class => "message #{type}" } %p= message = form_for(resource, :as => resource_name, :url => session_path(resource_name), :html => { :class => "form login" }) do |f| .group.wat-cf .left= f.label :email, :class => "label right" .right= f.text_field :email, :class => "text_field" .group.wat-cf .left= f.label :password, :class => "label right" .right= f.password_field :password, :class => "text_field" .group.wat-cf .right %button.button{ :type => "submit" } Login /= link_to "Sign In", destroy_user_session_path #box = yield The signup pages haml file: %h2 .block .content.login .flash - flash.each do |type, message| %div{ :class => "message #{type}" } %p= message = form_for(resource, :as => resource_name, :url => registration_path(resource_name)) do |f| = devise_error_messages! %div = f.label :firstname %br/ = f.text_field :firstname %div = f.label :middlename %br/ = f.text_field :middlename %div = f.label :lastname %br/ = f.text_field :lastname %div = f.label :email %br/ = f.email_field :email %div = f.label :password %br/ = f.password_field :password %div = f.label :academic %br/ = f.text_field :academic %div= f.submit "Continue" = render :partial => "devise/shared/links" I used web-app-theme to create an activo theme and then modify it.

  Read the article

• Disable chaching in JPA (eclipselink)

  - by James

  Hi, I want to use JPA (eclipselink) to get data from my database. The database is changed by a number of other sources and I therefore want to go back to the database for every find I execute. I have read a number of posts on disabling the cache but this does not seem to be working. Any ideas? I am trying to execute the following code: EntityManagerFactory entityManagerFactory = Persistence.createEntityManagerFactory("default"); EntityManager em = entityManagerFactory.createEntityManager(); MyLocation one = em.createNamedQuery("MyLocation.findMyLoc").getResultList().get(0); MyLocation two = em.createNamedQuery("MyLocation.findMyLoc").getResultList().get(0); System.out.println(one==two); one==two is true while I want it to be false. I have tried adding each/all the following to my persistence.xml <property name="eclipselink.cache.shared.default" value="false"/> <property name="eclipselink.cache.size.default" value="0"/> <property name="eclipselink.cache.type.default" value="None"/> I have also tried adding the @Cache annotation to the Entity itself: @Cache( type=CacheType.NONE, // Cache nothing expiry=0, alwaysRefresh=true ) Am I misunderstanding something? Thank you, James

  Read the article

• Split large repo into multiple subrepos and preserve history (Mercurial)

  - by Andrew

  We have a large base of code that contains several shared projects, solution files, etc in one directory in SVN. We're migrating to Mercurial. I would like to take this opportunity to reorganize our code into several repositories to make cloning for branching have less overhead. I've already successfully converted our repo from SVN to Mercurial while preserving history. My question: how do I break all the different projects into separate repositories while preserving their history? Here is an example of what our single repository (OurPlatform) currently looks like: /OurPlatform ---- Core ---- Core.Tests ---- Database ---- Database.Tests ---- CMS ---- CMS.Tests ---- Product1.Domain ---- Product1.Stresstester ---- Product1.Web ---- Product1.Web.Tests ---- Product2.Domain ---- Product2.Stresstester ---- Product2.Web ---- Product2.Web.Tests ==== Product1.sln ==== Product2.sln All of those are folders containing VS Projects except for the solution files. Product1.sln and Product2.sln both reference all of the other projects. Ideally, I'd like to take each of those folders, and turn them into separate Hg repos, and also add new repos for each project (they would act as parent repos). Then, If someone was going to work on Product1, they would clone the Product1 repo, which contained Product1.sln and subrepo references to ReferenceAssemblies, Core, Core.Tests, Database, Database.Tests, CMS, and CMS.Tests. So, it's easy to do this by just hg init'ing in the project directories. But can it be done while preserving history? Or is there a better way to arrange this?

  Read the article

• How can I sync files in two different git repositories (not clones) and maintain history?

  - by brian d foy

  I maintain two different git repos that need to share some files, and I'd like the commits in one repo to show up in the other. What's a good way to do that for ongoing maintenance? I've been one of the maintainers of the perlfaq (Github), and recently I fell into the role of maintaining the Perl core documentation, which is also in git. Long before I started maintaining the perlfaq, it lived in a separate source control repository. I recently converted that to git. Periodically, one of the perl5-porters would sync the shared files in the perlfaq repo and the perl repo. Since we've switched to git, we'e been a bit lazy converting the tools, and I'm now the one who does that. For the time being, the two repos are going to stay separate. Currently, to sync the FAQ for a new (monthly) release of perl, I'm almost ashamed to say that I merely copy the perlfaq*.pod files in the perlfaq repo and overlay them in the perl repo. That loses history, etc. Additionally, sometimes someone makes a change to those files in the perl repo and I end up overwriting it (yes, check git diff you idiot!). The files do not have the same paths in the repo, but that's something that I could change, I think. What I'd like to do, in the magical universe of rainbows and ponies, is pull the objects from the perlfaq repo and apply them in the perl repo, and vice-versa, so the history and commit ids correspond in each. Creating patches works, but it's also a lot work to manage it Git submodules seem to only work to pull in the entire external repo I haven't found something like svn's file externals, but that would work in both directions anyway I'd love to just fetch objects from one and cherry-pick them in the other What's a good way to manage this?

  Read the article

• NHibernate: Mapping multiple classes from a single table row

  - by Michael Kurtz

  I couldn't find an answer to this specific question. I am trying to keep my domain model object-oriented and re-use objects where possible. I am having an issue determining how to provide a mapping to multiple classes from a single row. Let me explain with an example: I have a single table, call it Customer. A customer has several attributes; but, for brevity, assume it has Id, Name, Address, City, State, ZipCode. I would like to create a Customer and Address class that look like this: public class Customer { public virtual long Id {get;set;} public virtual string Name {get;set;} public virtual Address Address {get;set;} } public class Address { public virtual string Address {get;set;} public virtual string City {get;set;} public virtual string State {get;set;} public virtual string ZipCode {get;set;} } What I am having trouble with is determining what the mapping would be for the Address class within the Customer class. There is no Address table and there isn't a "set" of addresses associated with a Customer. I just want a more object-oriented view of the Customer table in code. There are several other tables that have address information in them and it would be nice to have a reusable Address class to deal with them. Addresses are not shared so breaking all addresses into a separate table with foreign keys seems to be overkill and, actually, more painful since I would need foreign keys to multiple tables. Can someone enlighten me on this type of mapping? Please provide an example if you can. Thanks for any insights! -Mike

  Read the article

• Producer/consumer system using database (MySql), is this feasible?

  - by johnrl

  Hi all. I need to use something to coordinate my system with several consumers/producers each running on different machines with different operating systems. I have been researching on using MySql to do this, but it seems ridiculously difficult. My requirements are simple: I want to be able to add or remove consumers/producers at any time and thus they should not depend on each other at all. Naturally a database would separate the two nicely. I have been looking at Q4M message queuing plugin for MySql but it seems complicated to use: I have to recompile it every time I upgrade MySql (can this really be true?) because when I try to install it on Ubuntu 9.10 with MySql 5.1.37 it says "Can't open shared library 'libqueue_engine.so' (errno: 0 API version for STORAGE ENGINE plugin is too different)". There is no precompiled version for MySql 5.1.37 apparently. Also what if I want to run MySql on my windows machine, then I can't rely on this plugin as it only seems to run on Linux and OSX?? I really need some input on how to construct my system best possible.

  Read the article

• Creating spotlight in OpenGL scene

  - by Victor Oliveira

  Im studying OpenGL and trying to create a spot light at my application. The code that Im using for my #vertex-shader is below: #:vertex-shader #{ #version 150 core in vec3 in_pos; in vec2 in_tc; out vec2 tc; glLightf(GL_LIGHT0, GL_SPOT_CUTOFF, 20.0f); GLfloat spot_direction[] = { -1.0, -1.0, 0.0 }; glLightfv(GL_LIGHT0, GL_SPOT_DIRECTION, spot_direction); glEnable(GL_LIGHT0); void main() { vec4 pos= vec4(vec3(1.0)*in_pos - vec3(1.0), 1.0); pos.z=0.0; gl_Position = pos; tc = in_tc; } } The thing is, everytime Im trying to run the code an Error that says: Type: other, Source: api, ID: 131169, Severity: low Message: Framebuffer detailed info: The driver allocated storage for renderbuffer 1. len = 157, written = 0 failed to compile vertex shader of deferred: directional info log for shader deferred: directional vertex info log for shader deferred: directional: ERROR: Unbound variable: when Specifications: Renderer: GeForce GTX 580/PCIe/SSE2 Version: 3.3.0 NVIDIA 319.17 GLSL: 3.30 NVIDIA via Cg compiler Status: Using GLEW 1.9.0 1024 x 768 OS: Linux debian I guess to create this spotlight is pretty much simple, but since Im really new to OpenGL I dont have a clue how to do it until now, even reading sources like: http://www.glprogramming.com/red/chapter05.html#name3 Read also in some place that light spots can get really hard to understand, but I cant avoid this step right now since Im following my lecture schedule. Could anybody help me?

  Read the article

• Design suggestion for expression tree evaluation with time-series data

  - by Lirik

  I have a (C#) genetic program that uses financial time-series data and it's currently working but I want to re-design the architecture to be more robust. My main goals are: sequentially present the time-series data to the expression trees. allow expression trees to access previous data rows when needed. to optimize performance of the data access while evaluating the expression trees. keep a common interface so various types of data can be used. Here are the possible approaches I've thought about: I can evaluate the expression tree by passing in a data row into the root node and let each child node use the same data row. I can evaluate the expression tree by passing in the data row index and letting each node get the data row from a shared DataSet (currently I'm passing the row index and going to multiple synchronized arrays to get the data). Hybrid: an immutable data set is accessible by all of the expression trees and each expression tree is evaluated by passing in a data row. The benefit of the first approach is that the data row is being passed into the expression tree and there is no further query done on the data set (which should increase performance in a multithreaded environment). The drawback is that the expression tree does not have access to the rest of the data (in case some of the functions need to do calculations using previous data rows). The benefit of the second approach is that the expression trees can access any data up to the latest data row, but unless I specify what that row is, I'll have to iterate through the rows and figure out which one is the last one. The benefit of the hybrid is that it should generally perform better and still provide access to the earlier data. It supports two basic "views" of data: the latest row and the previous rows. Do you guys know of any design patterns or do you have any tips that can help me build this type of system? Should I use a DataSet to hold and present the data, or are there more efficient ways to present rows of data while maintaining a simple interface? FYI: All of my code is written in C#.

  Read the article

• Problems pulling data from NSMutableArray for MapKit?

  - by Graeme

  Hi, I have a class (DataImporter) which has the code to download an RSS feed. I also have a view and separate class (TableView) which displays the data in a UITableView and starts the parsing process, storing parsed information in an NSMutableArray (items). Now I wish to add a UIMapView which displays the items in the items NSMutableArray. I'm struggling to transfer the data into the new class (mapView) to show it in the map - and I preferably don't want to have to create a new class to download the data again for the map. Is there a way I can transfer the information from the NSMutableArray (items) to the mapView? Thanks. Code for viewDidLoad MapKit: Data *data = nil; NSString *ilocation = [data locations]; NSString *ilocation2 = @"New Zealand"; NSString *inewlString; inewlString = [ilocation stringByAppendingString:ilocation2]; NSLog(@"inewlString=%@",inewlString); if(forwardGeocoder == nil) { forwardGeocoder = [[BSForwardGeocoder alloc] initWithDelegate:self]; } // Forward geocode! [forwardGeocoder findLocation: inewlString]; Code for parsing data into NSMutable Array: - (void)beginParsing { NSLog(@"Parsing has begun"); //self.navigationItem.rightBarButtonItem.enabled = NO; // Allocate the array for song storage, or empty the results of previous parses if (incidents == nil) { NSLog(@"Grabbing array"); self.datas = [NSMutableArray array]; } else { [datas removeAllObjects]; [self.tableView reloadData]; } // Create the parser, set its delegate, and start it. self.parser = [[DataImporter alloc] init]; parser.delegate = self; [parser start]; }

  Read the article

• stdexcept On Android

  - by David R.

  I'm trying to compile SoundTouch on Android. I started with this configure line: ./configure CPPFLAGS="-I/Volumes/android-build/mydroid/development/ndk/build/platforms/android-3/arch-arm/usr/include/" LDFLAGS="-Wl,-rpath-link=/Volumes/android-build/mydroid/development/ndk/build/platforms/android-3/arch-arm/usr/lib -L/Volumes/android-build/mydroid/development/ndk/build/platforms/android-3/arch-arm/usr/lib -nostdlib -lc" --host=arm-eabi --enable-shared=yes CFLAGS="-nostdlib -O3 -mandroid" host_alias=arm-eabi --no-create --no-recursion Because the Android NDK targets ARM, I also had to change the Makefile to remove the -msse2 flags to progress. When I run 'make', I get: /bin/sh ../../libtool --tag=CXX --mode=compile arm-eabi-g++ -DHAVE_CONFIG_H -I. -I../../include -I../../include -I/Volumes/android-build/mydroid/development/ndk/build/platforms/android-3/arch-arm/usr/include/ -O3 -fcheck-new -I../../include -g -O2 -MT FIRFilter.lo -MD -MP -MF .deps/FIRFilter.Tpo -c -o FIRFilter.lo FIRFilter.cpp libtool: compile: arm-eabi-g++ -DHAVE_CONFIG_H -I. -I../../include -I../../include -I/Volumes/android-build/mydroid/development/ndk/build/platforms/android-3/arch-arm/usr/include/ -O3 -fcheck-new -I../../include -g -O2 -MT FIRFilter.lo -MD -MP -MF .deps/FIRFilter.Tpo -c FIRFilter.cpp -o FIRFilter.o FIRFilter.cpp:46:21: error: stdexcept: No such file or directory FIRFilter.cpp: In member function 'virtual void soundtouch::FIRFilter::setCoefficients(const soundtouch::SAMPLETYPE*, uint, uint)': FIRFilter.cpp:177: error: 'runtime_error' is not a member of 'std' FIRFilter.cpp: In static member function 'static void* soundtouch::FIRFilter::operator new(size_t)': FIRFilter.cpp:225: error: 'runtime_error' is not a member of 'std' make[2]: *** [FIRFilter.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all-recursive] Error 1 This isn't very surprising, since the -nostdlib flag was required. Android seems to have neither stdexcept nor stdlib. How can I get past this block of compiling SoundTouch? At a guess, there may be some flag I don't know about that I should use. I could refactor the code not to use stdexcept. There may be a way to pull in the original stdexcept source and reference that. I might be able to link to a precompiled stdexcept library.

  Read the article

• How to make a mapped field inherited from a superclass transient in JPA?

  - by Russ Hayward

  I have a legacy schema that cannot be changed. I am using a base class for the common features and it contains an embedded object. There is a field that is normally mapped in the embedded object that needs to be in the persistence id for only one (of many) subclasses. I have made a new id class that includes it but then I get the error that the field is mapped twice. Here is some example code that is much simplified to maintain the sanity of the reader: @MappedSuperclass class BaseClass { @Embedded private Data data; } @Entity class SubClass extends BaseClass { @EmbeddedId private SubClassId id; } @Embeddable class Data { private int location; private String name; } @Embeddable class SubClassId { private int thingy; private int location; } I have tried @AttributeOverride but I can only get it to rename the field. I have tried to set it to updatable = false, insertable = false but this did not seem to work when used in the @AttributeOverride annotation. See answer below for the solution to this issue. I realise I could change the base class but I really do not want to split up the embedded object to separate the shared field as it would make the surrounding code more complex and require some ugly wrapping code. I could also redesign the whole system for this corner case but I would really rather not. I am using Hibernate as my JPA provider.

  Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >