Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 407/421 | < Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >

• Duplex communication using NetTcpBinding - ContractFilter mismatch?

  - by Shaul

  I'm making slow and steady progress towards having a duplex communication channel open between a client and a server, using NetTcpBinding. (FYI, you can observe my newbie progress here and here!) I'm now at the stage where I have successfully connected to my server, through the server's firewall, and the client can make requests of the server. In the other direction, however, things aren't quite so happy. It works fine when testing on my own machine, but when testing over the internet, when I try to initiate a callback from the server side, I get an error: The message with Action 'http://MyWebService/IWebService/HelloWorld' cannot be processed at the receiver, due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport, None). Here are some of the key bits of code. First, the web interface: [ServiceContract(Namespace = "http://MyWebService", SessionMode = SessionMode.Required, CallbackContract = typeof(ISiteServiceExternal))] public interface IWebService { [OperationContract] void Register(long customerID); } public interface ISiteServiceExternal { [OperationContract] string HelloWorld(); } Then, on the client side (I was fiddling with these attributes without really knowing what I'm doing): [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerSession, Namespace="http://MyWebService")] class SiteServer : IWebServiceCallback { string IWebServiceCallback.HelloWorld() { return "Hello World!"; } ... } So what am I doing wrong here? EDIT: Adding app.config code. From server: <system.serviceModel> <diagnostics> <messageLogging logMalformedMessages="true" logMessagesAtServiceLevel="true" logMessagesAtTransportLevel="true" logEntireMessage="true" maxMessagesToLog="1000" maxSizeOfMessageToLog="524288" /> </diagnostics> <behaviors> <serviceBehaviors> <behavior name="mex"> <serviceDebug includeExceptionDetailInFaults="true"/> <serviceMetadata/> </behavior> </serviceBehaviors> </behaviors> <services> <service name ="MyWebService.WebService" behaviorConfiguration="mex"> <endpoint address="net.tcp://localhost:8000" binding="netTcpBinding" contract="MyWebService.IWebService" bindingConfiguration="TestBinding" name="MyEndPoint"></endpoint> <endpoint address ="mex" binding="mexTcpBinding" name="MEX" contract="IMetadataExchange"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:8000"/> </baseAddresses> </host> </service> </services> <bindings> <netTcpBinding> <binding name="TestBinding" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" portSharingEnabled="false"> <readerQuotas maxDepth="32" maxStringContentLength ="8192" maxArrayLength ="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384"/> <security mode="None"/> </binding> </netTcpBinding> </bindings> </system.serviceModel> and on the client side: <system.serviceModel> <bindings> <netTcpBinding> <binding name="MyEndPoint" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transactionFlow="false" transferMode="Buffered" transactionProtocol="OleTransactions" hostNameComparisonMode="StrongWildcard" listenBacklog="10" maxBufferPoolSize="524288" maxBufferSize="65536" maxConnections="10" maxReceivedMessageSize="65536"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="None"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign"> <extendedProtectionPolicy policyEnforcement="Never" /> </transport> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint address="net.tcp://mydomain.gotdns.com:8000/" binding="netTcpBinding" bindingConfiguration="MyEndPoint" contract="IWebService" name="MyEndPoint" /> </client> </system.serviceModel>

  Read the article

• global static boolean pointer causes segmentation fault using pthread

  - by asksw0rder

  New to pthread programming, and stuck on this error when working on a C++&C mixed code. What I have done is to call the c code in the thread created by the c++ code. There is a static boolean pointer used in the thread and should got free when the thread finishes. However I noticed that every time when the program processed into the c function, the value of the boolean pointer would be changed and the segmentation fault then happened due to the free(). Detail code is as follows: static bool *is_center; // omit other codes in between ... void streamCluster( PStream* stream) { // some code here ... while(1){ // some code here ... is_center = (bool*)calloc(points.num,sizeof(bool)); // start the parallel thread here. // the c code is invoked in this function. localSearch(&points,kmin, kmax,&kfinal); // parallel free(is_center); } And the function using parallel is as follows (my c code is invoked in each thread): void localSearch( Points* points, long kmin, long kmax, long* kfinal ) { pthread_barrier_t barrier; pthread_t* threads = new pthread_t[nproc]; pkmedian_arg_t* arg = new pkmedian_arg_t[nproc]; pthread_barrier_init(&barrier,NULL,nproc); for( int i = 0; i < nproc; i++ ) { arg[i].points = points; arg[i].kmin = kmin; arg[i].kmax = kmax; arg[i].pid = i; arg[i].kfinal = kfinal; arg[i].barrier = &barrier; pthread_create(threads+i,NULL,localSearchSub,(void*)&arg[i]); } for ( int i = 0; i < nproc; i++) { pthread_join(threads[i],NULL); } delete[] threads; delete[] arg; pthread_barrier_destroy(&barrier); } Finally the function calling my c code: void* localSearchSub(void* arg_) { // omit some initialize code... // my code begin_papi_thread(&eventSet); // Processing k-means, omit codes. // is_center value will be updated correctly // my code end_papi_thread(&eventSet); // when jumping into this, error happens return NULL; } And from gdb, what I have got for the is_center is: Breakpoint 2, localSearchSub (arg_=0x600000000000bc40) at streamcluster.cpp:1711 1711 end_papi_thread(&eventSet); (gdb) s Hardware watchpoint 1: is_center Old value = (bool *) 0x600000000000bba0 New value = (bool *) 0xa93f3 0x400000000000d8d1 in localSearchSub (arg_=0x600000000000bc40) at streamcluster.cpp:1711 1711 end_papi_thread(&eventSet); Any suggestions? Thanks in advance!

  Read the article

• How and why do I set up a C# build machine?

  - by mmr

  Hi all, I'm working with a small (4 person) development team on a C# project. I've proposed setting up a build machine which will do nightly builds and tests of the project, because I understand that this is a Good Thing. Trouble is, we don't have a whole lot of budget here, so I have to justify the expense to the powers that be. So I want to know: What kind of tools/licenses will I need? Right now, we use Visual Studio and Smart Assembly to build, and Perforce for source control. Will I need something else, or is there an equivalent of a cron job for running automated scripts? What, exactly, will this get me, other than an indication of a broken build? Should I set up test projects in this solution (sln file) that will be run by these scripts, so I can have particular functions tested? We have, at the moment, two such tests, because we haven't had the time (or frankly, the experience) to make good unit tests. What kind of hardware will I need for this? Once a build has been finished and tested, is it a common practice to put that build up on an ftp site or have some other way for internal access? The idea is that this machine makes the build, and we all go to it, but can make debug builds if we have to. How often should we make this kind of build? How is space managed? If we make nightly builds, should we keep around all the old builds, or start to ditch them after about a week or so? Is there anything else I'm not seeing here? I realize that this is a very large topic, and I'm just starting out. I couldn't find a duplicate of this question here, and if there's a book out there I should just get, please let me know. EDIT: I finally got it to work! Hudson is completely fantastic, and FxCop is showing that some features we thought were implemented were actually incomplete. We also had to change the installer type from Old-And-Busted vdproj to New Hotness WiX. Basically, for those who are paying attention, if you can run your build from the command line, then you can put it into hudson. Making the build run from the command line via MSBuild is a useful exercise in itself, because it forces your tools to be current.

  Read the article

• Coolstack MySQL Crash Unable to Restart

  - by rayblasdel

  Environment: Solaris 10 This mysql server has been up and running for 6 months now. Today all of a sudden it crashed. When typing 'mysql' as user it gives the error MYSQL" Error 2002 (HY000): Can't Connect to Local MySQL server though socket '/tmp/mysql.sock' The server try to open mysql, it stays open for 9-10 seconds and restarts the process. Below are the application logs. Application-database-mysql_mysql-csk.log [ May 30 22:37:52 Enabled. ] [ May 30 22:37:58 Rereading configuration. ] [ May 30 22:37:59 Executing start method ("/opt/coolstack/lib/svc/method/svc-cskmysql start") ] /opt/coolstack/mysql/bin/mysqld_safe --user=mysql --datadir=/dbpool1/data --pid-file=/dbpool1/data/database.soliaonline.com.pid [ May 30 22:37:59 Method "start" exited with status 0 ] [ May 30 22:38:13 Stopping because all processes in service exited. ] [ May 30 22:38:13 Executing stop method ("/opt/coolstack/lib/svc/method/svc-cskmysql stop") ] [ May 30 22:38:13 Method "stop" exited with status 0 ] [ May 30 22:38:13 Executing start method ("/opt/coolstack/lib/svc/method/svc-cskmysql start") ] /opt/coolstack/mysql/bin/mysqld_safe --user=mysql --datadir=/dbpool1/data --pid-file=/dbpool1/data/database.soliaonline.com.pid [ May 30 22:38:13 Method "start" exited with status 0 ] [ May 30 22:38:25 Stopping because all processes in service exited. ] [ May 30 22:38:25 Executing stop method ("/opt/coolstack/lib/svc/method/svc-cskmysql stop") ] [ May 30 22:38:25 Method "stop" exited with status 0 ] I am hoping someone might have run into this before and might know how to fix it. The following is an excerpt from the MySQL Error log 100530 22:44:03 mysqld_safe mysqld from pid file /dbpool1/data/database.soliaonline.com.pid ended 100530 22:44:04 mysqld_safe Starting mysqld daemon with databases from /dbpool1/data InnoDB: Log scan progressed past the checkpoint lsn 32 727170612 100530 22:44:13 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... InnoDB: Doing recovery: scanned up to log sequence number 32 727200901 100530 22:44:14 InnoDB: Starting an apply batch of log records to the database... InnoDB: Progress in percents: 100530 22:44:14 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=209715200 read_buffer_size=1048576 max_used_connections=0 max_threads=10000 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 31024253 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. enter code here

  Read the article

• Performance of SHA-1 Checksum from Android 2.2 to 2.3 and Higher

  - by sbrichards

  In testing the performance of: package com.srichards.sha; import android.app.Activity; import android.os.Bundle; import android.widget.TextView; import java.io.IOException; import java.io.InputStream; import java.security.MessageDigest; import java.security.NoSuchAlgorithmException; import java.util.zip.ZipEntry; import java.util.zip.ZipFile; import com.srichards.sha.R; public class SHAHashActivity extends Activity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); TextView tv = new TextView(this); String shaVal = this.getString(R.string.sha); long systimeBefore = System.currentTimeMillis(); String result = shaCheck(shaVal); long systimeResult = System.currentTimeMillis() - systimeBefore; tv.setText("\nRunTime: " + systimeResult + "\nHas been modified? | Hash Value: " + result); setContentView(tv); } public String shaCheck(String shaVal){ try{ String resultant = "null"; MessageDigest digest = MessageDigest.getInstance("SHA1"); ZipFile zf = null; try { zf = new ZipFile("/data/app/com.blah.android-1.apk"); // /data/app/com.blah.android-2.apk } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } ZipEntry ze = zf.getEntry("classes.dex"); InputStream file = zf.getInputStream(ze); byte[] dataBytes = new byte[32768]; //65536 32768 int nread = 0; while ((nread = file.read(dataBytes)) != -1) { digest.update(dataBytes, 0, nread); } byte [] rbytes = digest.digest(); StringBuffer sb = new StringBuffer(""); for (int i = 0; i< rbytes.length; i++) { sb.append(Integer.toString((rbytes[i] & 0xff) + 0x100, 16).substring(1)); } if (shaVal.equals(sb.toString())) { resultant = ("\nFalse : " + "\nFound:\n" + sb.toString() + "|" + "\nHave:\n" + shaVal); } else { resultant = ("\nTrue : " + "\nFound:\n" + sb.toString() + "|" + "\nHave:\n" + shaVal); } return resultant; } catch (IOException e) { e.printStackTrace(); } catch (NoSuchAlgorithmException e) { e.printStackTrace(); } return null; } } On a 2.2 Device I get average runtime of ~350ms, while on newer devices I get runtimes of 26-50ms which is substantially lower. I'm keeping in mind these devices are newer and have better hardware but am also wondering if the platform and the implementation affect performance much and if there is anything that could reduce runtimes on 2.2 devices. Note, the classes.dex of the .apk being accessed is roughly 4MB. Thanks!

  Read the article

• Help needed on an SQL configuration problem.

  - by user321048

  I have been banging my head with this one more the two weeks, and still don't know what the problem is ( I can't narrow it down). The problem is the following. I have a solution with 3 project in it all written in c# and I with LINQ. One project is the main web site, the other is the data layer (communication with the database) and the third one is a custom little CMS. The problem is the following: On a hosting provider when I publish the site it all works perfectly, but this site was needed to be hosted on the client server so I needed to do that. But the problem is that I also needed to configure the client server, because they don't have an Administrator employed (I know, I know ;) ). For the first time I some how managed, to set it up but a problem appear. My main web site is working just as it suppose to be - it reads (communicates with) the database, but My CMS is not. It shows the first log in page, but after that when I try to log in it throws the following error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4860189 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117 System.Data.SqlClient.SqlConnection.Open() +122 System.Data.Linq.SqlClient.SqlConnectionManager.UseConnection(IConnectionUser user) +44 System.Data.Linq.SqlClient.SqlProvider.get_IsSqlCe() +45 System.Data.Linq.SqlClient.SqlProvider.InitializeProviderMode() +20 System.Data.Linq.SqlClient.SqlProvider.System.Data.Linq.Provider.IProvider.Execute(Expression query) +57 System.Data.Linq.DataQuery`1.System.Linq.IQueryProvider.Execute(Expression expression) +23 System.Linq.Queryable.Count(IQueryable`1 source) +240 CMS.Security.UserProfile.LoginUser() in C:\Documents and Settings\Dimitar\Desktop\New Mepso Final 08_04\CMS\Classes\UserProfile.cs:132 CMS.Default.Login1_Authenticate(Object sender, AuthenticateEventArgs e) in C:\Documents and Settings\Dimitar\Desktop\New Mepso Final 08_04\CMS\Default.aspx.cs:37 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +108 System.Web.UI.WebControls.Login.AttemptLogin() +115 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +101 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +37 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +118 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +166 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565 Maybe this is a dumb question, but I cannot find the root of the problem, let alone the solution. So far I have tried the following: -setting time out on connection string to a higher value -configuration and after that turning off server firewall -checking the connection string over and over again (they are the same for all three projects and are saved in web.config) Important notes: I have tried executing the project from VS2008 with a connection string to the same database and the results are the same. That's why I think the problem is the SQL Server 2005 and not the IIS7. Any bit of information is more then welcomed.

  Read the article

• jQuery: modify href attribute for first level list only

  - by bloggerious

  I'm a noob in jQuery and have stuck at this. I have the following HTML code output from a PHP page: <ul class="cats"> <li><span><a href="cant_post_link_yet1">Lifestyle</a></span></li> <li><span><a href="cant_post_link_yet2">Entertainment</a></span></li> <li class="has_child"> <span><a href="cant_post_link_yet3">Technology</a></span> <ul class="subcats"> <li><span><a href="cant_post_link_yet4">Gadgets</a></span></li> <li><span><a href="cant_post_link_yet5">Hardware</a></span></li> </ul> </li> <li><span><a href="cant_post_link_yetsports">Sports</a></span></li> <li class="has_child"> <span><a href="cant_post_link_yet6">Design</a></span> <ul class="subcats"> <li class="has_child"> <span><a href="cant_post_link_yet7">Web Design</a></span> <ul class="subcat"> <li><span><a href="cant_post_link_yet8">Adobe Photoshop</a></span></li> </ul> </li> <li><span><a href="cant_post_link_yet9">Graphics and Print</a></span></li> </ul> </li> What's the correct jQuery code so that I can modify the href attribute for the first-level list only? Basically, I want to change the href of Technology and Design to be "#" but will not change the href of Web Design which is already on second-level list. More Info: In the code above, if list has subcategories, then it has the class has_child, whether it's on first-level or not. So I want only the first-level list which has class has_child to be modified the href to "#" I can't alter output anymore because it's in the PHP code. Any help is greatly appreciated.

  Read the article

• How is "clean" testing done on the Macintosh without virtualization?

  - by Schnapple

  One of the things I've run across on Windows is when a web browser plugin or program you're developing makes an assumption that something is installed that, by default, isn't always present on Windows. A perfect example would be .NET - a whole lot of people running Windows XP have never installed any versions of .NET and so the installer needs to detect and remedy this if necessary. The way I've been testing this in Windows is to have a virtual machine with a snapshot of a clean, patched, but otherwise untouched install of XP or Vista or 7 or whatever. When I'm done testing I just discard any changes since the snapshot. Works great. I'm now developing something for the Macintosh, a platform which is very new to me, and I'm seeing that virtualization does not appear to be an option. It's explicitly forbidden in the EULA of Mac OS X, it's only allowed from Mac OS X Server, which seeing as how I'm targeting an end product is of no use to me, and the one program I see which can virtualize it - VirtualBox - only supports the server and actively nukes any discussion of running the consumer/client version of Mac OS X. And the only instructions I find anywhere on the topic seem to involve the use of "hacking" programs which is very much incompatible with the full-time gig I'm trying to do this for. So it looks like virtualization is out, but at various points I'm going to want or need to simulate what it's like to install and run this software on a "clean" Macintosh. How do people usually do this? Just buy multiple Macintoshes and use Time Machine? Am I thinking about this all wrong and everything Just Works? To be clear I'm not trying to run Mac OS X on a Windows machine. I have a Macintosh, I'm fine with virtualizing Mac OS X on Apple hardware, I'm just not seeing a route to making the non-Server version do this. I'm aware that Mac OS X Server can be virtualized but that's not what I'm going for. I'm aware that there are unsanctioned/unsupported methods of making Mac OS X run in virtualization programs like VirtualBox but for legal reasons I am not interested in those. My question is not "how can I do this?" but rather "so this thing I do on Windows seems to not be possible, generally, on the Macintosh, so what do people do to achieve what I'm going for?"

  Read the article

• cannot access localhost using ip

  - by Robert

  I have done a small web development project using eclipse. It runs well when I try running it on browser with url localhost:8080/myproject/home.html. But if I want to access it on another machine (laptop, mobile, etc. using the same wifi) it is not possible; it is not able to connect. After Googling for a while found out that I have to use the IP address instead of 'localhost'. So I tried 10.0.0.4:8080/myproject/home.html, but still does not work. In fact i am unable to open that url on the same machine (where localhost:8080/myproject/home.html works fine). I also added a new Inbound rule in control panel firewall settings, allowing access to all ports for protocol TCP. Still have problem in running application with the url 10.0.0.4:8080/myproject/home.html (both on same machine as well as laptop and mobile). FYI i am using Eclipse Indigo, Apache tomcat 6.0 and server.xml file contents is as below: <?xml version="1.0" encoding="UTF-8"?> <!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --><!-- Note: A "Server" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/server.html --><Server port="8005" shutdown="SHUTDOWN"> <!--APR library loader. Documentation at /docs/apr.html --> <Listener SSLEngine="on" className="org.apache.catalina.core.AprLifecycleListener"/> <!--Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html --> <Listener className="org.apache.catalina.core.JasperListener"/> <!-- Prevent memory leaks due to use of particular java/javax APIs--> <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener"/> <!-- JMX Support for the Tomcat server. Documentation at /docs/non-existent.html --> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"/> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"/> <!-- Global JNDI resources Documentation at /docs/jndi-resources-howto.html --> <GlobalNamingResources> <!-- Editable user database that can also be used by UserDatabaseRealm to authenticate users --> <Resource auth="Container" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" name="UserDatabase" pathname="conf/tomcat-users.xml" type="org.apache.catalina.UserDatabase"/> </GlobalNamingResources> <!-- A "Service" is a collection of one or more "Connectors" that share a single "Container" Note: A "Service" is not itself a "Container", so you may not define subcomponents such as "Valves" at this level. Documentation at /docs/config/service.html --> <Service name="Catalina"> <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8080" protocol="HTTP/1.1" address="10.0.0.4" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine defaultHost="localhost" name="Catalina"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> --> <!-- The request dumper valve dumps useful debugging information about the request and response data received and sent by Tomcat. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.RequestDumperValve"/> --> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <!-- Define the default virtual host Note: XML Schema validation will not work with Xerces 2.2. --> <Host appBase="webapps" autoDeploy="true" name="localhost" unpackWARs="true" xmlNamespaceAware="false" xmlValidation="false"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/> --> <Context docBase="myproject" path="/myproject" reloadable="true" source="org.eclipse.jst.jee.server:myproject"/></Host> </Engine> </Service> </Server>

  Read the article

• Separate specific #ifdef branches

  - by detly

  In short: I want to generate two different source trees from the current one, based only on one preprocessor macro being defined and another being undefined, with no other changes to the source. If you are interested, here is my story... In the beginning, my code was clean. Then we made a new product, and yea, it was better. But the code saw only the same peripheral devices, so we could keep the same code. Well, almost. There was one little condition that needed to be changed, so I added: #if defined(PRODUCT_A) condition = checkCat(); #elif defined(PRODUCT_B) condition = checkCat() && checkHat(); #endif ...to one and only one source file. In the general all-source-files-include-this header file, I had: #if !(defined(PRODUCT_A)||defined(PRODUCT_B)) #error "Don't make me replace you with a small shell script. RTFM." #endif ...so that people couldn't compile it unless they explicitly defined a product type. All was well. Oh... except that modifications were made, components changed, and since the new hardware worked better we could significantly re-write the control systems. Now when I look upon the face of the code, there are more than 60 separate areas delineated by either: #ifdef PRODUCT_A ... #else ... #endif ...or the same, but for PRODUCT_B. Or even: #if defined(PRODUCT_A) ... #elif defined(PRODUCT_B) ... #endif And of course, sometimes sanity took a longer holiday and: #ifdef PRODUCT_A ... #endif #ifdef PRODUCT_B ... #endif These conditions wrap anywhere from one to two hundred lines (you'd think that the last one could be done by switching header files, but the function names need to be the same). This is insane. I would be better off maintaining two separate product-based branches in the source repo and porting any common changes. I realise this now. Is there something that can generate the two different source trees I need, based only on PRODUCT_A being defined and PRODUCT_B being undefined (and vice-versa), without touching anything else (ie. no header inclusion, no macro expansion, etc)?

  Read the article

• Opening Macro definitions: tdfx_span.c: lvalue required as left operand of assignment

  - by anttir

  Hi, I'm trying to compile X11R6-7.0 under Ubuntu maverick and got some weird compilation errors I'm unable to resolve myself. I needed X11R6-7.0 as ati catalyst drivers don't support newer xorg and oss drivers don't support 3d acceleration of my hardware. Anyone know what this error message means? I know some C but I got a bit confused. Does it mean GET_FB_DATA macro returned NULL or some method/property not set? Any further insight how to "debug" preprocessor definitions at this point would be great. I don't think I can print anything useful with #error. The error I get: tdfx_span.c: In function ‘tdfxDDWriteDepthPixels’: tdfx_span.c:976: error: lvalue required as left operand of assignment tdfx_span.c:1008: error: lvalue required as left operand of assignment tdfx_span.c: In function ‘write_stencil_pixels’: tdfx_span.c:1242: error: lvalue required as left operand of assignment the Code: 958- switch (depth_size) { 959- case 16: 960- GetBackBufferInfo(fxMesa, &backBufferInfo); 961- /* 962- * Note that the _LOCK macro adds a curly brace, 963- * and the UNLOCK macro removes it. 964- */ 965- WRITE_FB_SPAN_LOCK(fxMesa, info, 966- GR_BUFFER_AUXBUFFER, GR_LFBWRITEMODE_ANY); 967- { 968- LFBParameters ReadParams; 969- GetFbParams(fxMesa, &info, &backBufferInfo, 970- &ReadParams, sizeof(GLushort)); 971- for (i = 0; i < n; i++) { 972- if (mask[i] && visible_pixel(fxMesa, x[i], y[i])) { 973- xpos = x[i] + fxMesa->x_offset; 974- ypos = bottom - y[i]; 975- d16 = depth[i]; 976: PUT_FB_DATA(&ReadParams, GLushort, xpos, ypos, d16); 977- } 978- } 979- } 980- WRITE_FB_SPAN_UNLOCK(fxMesa, GR_BUFFER_AUXBUFFER); 981- break; 982- case 24: And relative macros: #define GET_FB_DATA(ReadParamsp, type, x, y) \ (((x) < (ReadParamsp)->firstWrappedX) \ ? (((type *)((ReadParamsp)->lfbPtr)) \ [(y) * ((ReadParamsp)->LFBStrideInElts) \ + (x)]) \ : (((type *)((ReadParamsp)->lfbWrapPtr)) \ [((y)) * ((ReadParamsp)->LFBStrideInElts) \ + ((x) - (ReadParamsp)->firstWrappedX)])) #define GET_ORDINARY_FB_DATA(ReadParamsp, type, x, y) \ (((type *)((ReadParamsp)->lfbPtr)) \ [(y) * ((ReadParamsp)->LFBStrideInElts) \ + (x)]) #define GET_WRAPPED_FB_DATA(ReadParamsp, type, x, y) \ (((type *)((ReadParamsp)->lfbWrapPtr)) \ [((y)) * ((ReadParamsp)->LFBStrideInElts) \ + ((x) - (ReadParamsp)->firstWrappedX)]) #define PUT_FB_DATA(ReadParamsp, type, x, y, value) \ (GET_FB_DATA(ReadParamsp, type, x, y) = (type)(value)) #define PUT_ORDINARY_FB_DATA(ReadParamsp, type, x, y, value) \ (GET_ORDINARY_FB_DATA(ReadParamsp, type, x, y) = (type)(value)) #define PUT_WRAPPED_FB_DATA(ReadParamsp, type, x, y, value) \ (GET_WRAPPED_FB_DATA(ReadParamsp, type, x, y) = (type)(value)) The LFBParameters Struct 483-typedef struct 484-{ 485- void *lfbPtr; 486- void *lfbWrapPtr; 487- FxU32 LFBStrideInElts; 488- GLint firstWrappedX; 489-} 490:LFBParameters; Thanks for looking.

  Read the article

• Creating multiple heads in remote repository

  - by Jab

  We are looking to move our team (~10 developers) from SVN to mercurial. We are trying to figure out how to manage our workflow. In particular, we are trying to see if creating remote heads is the right solution. We currently have a very large repository with multiple, related projects. They share a lot of code, but pieces of the project are deployed by different teams (3 teams) independent of other portions of the code-base. So each team is working on concurrent large features. The way we currently handles this in SVN are branches. Team1 has a branch for Feature1, same deal for the other teams. When Team1 finishes their change, it gets merged into the trunk and deployed out. The other teams follow suite when their project is complete, merging of course. So my initial thought are using Named Branches for these situations. Team1 makes a Feature1 branch off of the default branch in Hg. Now, here is the question. Should the team PUSH that branch, in it's current/half-state to the repository. This will create a second head in the core repo. My initial reaction was "NO!" as it seems like a bad idea. Handling multiple heads on our repository just sounds awful, but there are some advantages... First, the teams want to setup Continuous Integration to build this branch during their development cycle(months long). This will only work if the CI can pull this branch from the repo. This is something we do now with SVN, copy a CI build and change the branch. Easy. Second, it makes it easier for any team member to jump onto the branch and start working. Without pushing to the core repo, they would have to receive a push from a developer on that team with the changeset information. It is also possible to lose local commits to hardware failure. The chances increase a lot if it's a branch by a single developer who has followed the "don't push until finished" approach. And lastly is just for ease of use. The developers can easily just commit and push on their branch at any time without consequence(as they do today, in their SVN branches). Is there a better way to handle this scenario that I may be missing? I just want a veteran's opinion before moving forward with the strategy. For bug fixes we like the general workflow of mecurial, anonymous branches that only consist of 1-2 commits. The simplicity is great for those cases. By the way, I've read this , great article which seems to favor Named branches.

  Read the article

• connecting clients to server with emulator on different computers

  - by prolink007

  I am writing an application that communicates using sockets. I have a server running on one android emulator on a computer, then i have 2 other clients running on android emulators on 2 other computers. I am trying to get the 2 clients to connect to the server. This works when i run the server and clients on the same computer, but when i attempt to do this on the same wifi network and on separate computers it gives me the following error. The client and server code is posted below. A lot is stripped out just to show the important stuff. Also, after the server starts i telnet into the server and run these commands redir add tcp:5000:6000 (i have also tried without doing the redir but it still says the same thing). Then i start the clients and get the error. Thanks for the help! Both the 5000 port and 6000 port are open on my router. And i have windows firewall disabled on the computer hosting the server. 11-27 18:54:02.274: W/ActivityManager(60): Activity idle timeout for HistoryRecord{44cf0a30 school.cpe434.ClassAidClient/school.cpe434.ClassAid.ClassAidClient4Activity} 11-27 18:57:02.424: W/System.err(205): java.net.SocketException: The operation timed out 11-27 18:57:02.454: W/System.err(205): at org.apache.harmony.luni.platform.OSNetworkSystem.connectSocketImpl(Native Method) 11-27 18:57:02.454: W/System.err(205): at org.apache.harmony.luni.platform.OSNetworkSystem.connect(OSNetworkSystem.java:114) 11-27 18:57:02.465: W/System.err(205): at org.apache.harmony.luni.net.PlainSocketImpl.connect(PlainSocketImpl.java:245) 11-27 18:57:02.465: W/System.err(205): at org.apache.harmony.luni.net.PlainSocketImpl.connect(PlainSocketImpl.java:220) 11-27 18:57:02.465: W/System.err(205): at java.net.Socket.startupSocket(Socket.java:780) 11-27 18:57:02.465: W/System.err(205): at java.net.Socket.<init>(Socket.java:314) 11-27 18:57:02.465: W/System.err(205): at school.cpe434.ClassAid.ClassAidClient4Activity.onCreate(ClassAidClient4Activity.java:102) 11-27 18:57:02.474: W/System.err(205): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 11-27 18:57:02.474: W/System.err(205): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2459) 11-27 18:57:02.474: W/System.err(205): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2512) 11-27 18:57:02.474: W/System.err(205): at android.app.ActivityThread.access$2200(ActivityThread.java:119) 11-27 18:57:02.474: W/System.err(205): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1863) 11-27 18:57:02.474: W/System.err(205): at android.os.Handler.dispatchMessage(Handler.java:99) 11-27 18:57:02.474: W/System.err(205): at android.os.Looper.loop(Looper.java:123) 11-27 18:57:02.486: W/System.err(205): at android.app.ActivityThread.main(ActivityThread.java:4363) 11-27 18:57:02.486: W/System.err(205): at java.lang.reflect.Method.invokeNative(Native Method) 11-27 18:57:02.486: W/System.err(205): at java.lang.reflect.Method.invoke(Method.java:521) 11-27 18:57:02.486: W/System.err(205): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 11-27 18:57:02.486: W/System.err(205): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 11-27 18:57:02.486: W/System.err(205): at dalvik.system.NativeStart.main(Native Method) The server code public class ClassAidServer4Activity extends Activity { ServerSocket ss = null; String mClientMsg = ""; String mClientExtraMsg = ""; Thread myCommsThread = null; public static final int SERVERPORT = 6000; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); TextView tv = (TextView) findViewById(R.id.textView1); tv.setText("Nothing from client yet"); this.myCommsThread = new Thread(new CommsThread()); this.myCommsThread.start(); } class CommsThread implements Runnable { public void run() { // Socket s = null; try { ss = new ServerSocket(SERVERPORT ); } catch (IOException e1) { // TODO Auto-generated catch block e1.printStackTrace(); } while(true) { try { Socket socket = ss.accept(); connectedDeviceCount++; Thread lThread = new Thread(new ListeningThread(socket)); lThread.start(); } catch (IOException e) { e.printStackTrace(); } } } } class ListeningThread implements Runnable { private Socket s = null; public ListeningThread(Socket socket) { // TODO Auto-generated constructor stub this.s = socket; } @Override public void run() { // TODO Auto-generated method stub while (!Thread.currentThread().isInterrupted()) { Message m = new Message(); // m.what = QUESTION_ID; try { if (s == null) s = ss.accept(); BufferedReader input = new BufferedReader( new InputStreamReader(s.getInputStream())); String st = null; st = input.readLine(); String[] temp = parseReadMessage(st); mClientMsg = temp[1]; if(temp.length > 2) { mClientExtraMsg = temp[2]; } m.what = Integer.parseInt(temp[0]); myUpdateHandler.sendMessage(m); } catch (IOException e) { e.printStackTrace(); } } } } } The client code public class ClassAidClient4Activity extends Activity { //telnet localhost 5554 //redir add tcp:5000:6000 private Socket socket; private String serverIpAddress = "192.168.1.102"; private static final int REDIRECTED_SERVERPORT = 5000; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); try { InetAddress serverAddr = InetAddress.getByName(serverIpAddress); socket = new Socket(serverAddr, REDIRECTED_SERVERPORT); } catch (UnknownHostException e1) { mQuestionAdapter.add("UnknownHostException"); e1.printStackTrace(); } catch (IOException e1) { mQuestionAdapter.add("IOException"); e1.printStackTrace(); } } }

  Read the article

• Technical non-terminating condition in a loop

  - by Snarfblam

  Most of us know that a loop should not have a non-terminating condition. For example, this C# loop has a non-terminating condition: any even value of i. This is an obvious logic error. void CountByTwosStartingAt(byte i) { // If i is even, it never exceeds 254 for(; i < 255; i += 2) { Console.WriteLine(i); } } Sometimes there are edge cases that are extremely unlikeley, but technically constitute non-exiting conditions (stack overflows and out-of-memory errors aside). Suppose you have a function that counts the number of sequential zeros in a stream: int CountZeros(Stream s) { int total = 0; while(s.ReadByte() == 0) total++; return total; } Now, suppose you feed it this thing: class InfiniteEmptyStream:Stream { // ... Other members ... public override int Read(byte[] buffer, int offset, int count) { Array.Clear(buffer, offset, count); // Output zeros return count; // Never returns -1 (end of stream) } } Or more realistically, maybe a stream that returns data from external hardware, which in certain cases might return lots of zeros (such as a game controller sitting on your desk). Either way we have an infinite loop. This particular non-terminating condition stands out, but sometimes they don't. A completely real-world example as in an app I'm writing. An endless stream of zeros will be deserialized into infinite "empty" objects (until the collection class or GC throws an exception because I've exceeded two billion items). But this would be a completely unexpected circumstance (considering my data source). How important is it to have absolutely no non-terminating conditions? How much does this affect "robustness?" Does it matter if they are only "theoretically" non-terminating (is it okay if an exception represents an implicit terminating condition)? Does it matter whether the app is commercial? If it is publicly distributed? Does it matter if the problematic code is in no way accessible through a public interface/API? Edit: One of the primary concerns I have is unforseen logic errors that can create the non-terminating condition. If, as a rule, you ensure there are no non-terminating conditions, you can identify or handle these logic errors more gracefully, but is it worth it? And when? This is a concern orthogonal to trust.

  Read the article

• How do I add "Press any key to boot from usb" when installing Windows from a flash drive? (Grub4dos question / how to remove a bootloader)

  - by Vincent

  Hi there! I've been struggling with this problem for a while now and finially decided to ask for help. Let me first explain what the main purpose of the app is: to provide the a very easy to use way of backing up files, after which I format the drive and start Windows 7 setup. I do this by booting WinPE, which runs a script to detect Windows installations and then opens a file browser. After the file browser is closed, the script continues and formats the drive that contains the Windows installation, and starts an unattended Windows 7 install. Now here is the problem: When you start Windows setup or WinPE from a dvd, you get a nice option to "Press any key to boot from DVD". This is to prevent the computer from booting the DVD when the first phase of the installation is complete and the computer reboots. However, when booting from a flash drive, Windows does not provide this option: it simply boots the flash drive every reboot. To replicate the "press any key" function, I installed Grub4Dos, which works great. It provides a small menu, the first standard item being "Continue installation", the second being "start installation". After quite a lot of tweaking, I got everything working: Start installation starts WinPE, which in turn starts the Windows installation. At first reboot, the Grub4Dos menu comes up, counts 5 seconds and boots the second stage of the installation. Here, I am greeted with the error: "Windows setup could not configure windows to run on this computer's hardware." When I boot into WinPE the normal way (put the bootmgr on the stick root) and change my bios to boot from the primary hdd after first reboot, I don't get this error. I've been looking around, and the only thing I could find was that the BIOS automatically names the boot device hd0, and that Windows can only be run / installed to hd 0. I'm not sure if this is the problem. I read about remapping to solve this problem, but to do that you have to know the phisical location of the hard drive and partition, like hd(0,1). I want this flash drive to work on any PC, regardless of where the OS is installed, so that's not really a possibility. A possible fix I thought of is removing the bootloader from the flash drive when I'm in WinPE. That way, when the pc reboots the BIOS will not see the flash drive as a boot drive and instead boot the primary hdd. I have yet to find a way to do this. Thank you for reading my question, and if you have any suggestion, please do.

  Read the article

• What is wrong with this attempt of sending a break-signal?

  - by Jook

  I have quite a headache about this seemingly easy task: send a break signal to my device, like the wxTerm (or any similar Terminal application) does. This signal has to be 125ms long, according to my tests and the devices specification. It should result in a specific response, but what I get is a longer response than expected, and the transmitted date is false. e.g.: what it should respond 08 00 81 00 00 01 07 00 what it does respond 08 01 0A 0C 10 40 40 07 00 7F What really boggles me is, that after I have used wxTerm to look at my available com-ports (without connecting or sending anything), my code starts to work! I can send then as many breaks as I like, I get my response right from then on. I have to reset my PC in order to try it again. What the heck is going on here?! Here is my code for a reset through a break-signal: minicom_client(boost::asio::io_service& io_service, unsigned int baud, const string& device) : active_(true), io_service_(io_service), serialPort(io_service, device) { if (!serialPort.is_open()) { cerr << "Failed to open serial port\n"; return; } boost::asio::serial_port_base::flow_control FLOW( boost::asio::serial_port_base::flow_control::hardware ); boost::asio::serial_port_base::baud_rate baud_option(baud); serialPort.set_option(FLOW); serialPort.set_option(baud_option); read_start(); std::cout << SetCommBreak(serialPort.native_handle()) << std::endl; std::cout << GetLastError() << std::endl; boost::posix_time::ptime mst1 = boost::posix_time::microsec_clock::local_time(); boost::this_thread::sleep(boost::posix_time::millisec(125)); boost::posix_time::ptime mst2 = boost::posix_time::microsec_clock::local_time(); std::cout << ClearCommBreak(serialPort.native_handle()) << std::endl; std::cout << GetLastError() << std::endl; boost::posix_time::time_duration msdiff = mst2 - mst1; std::cout << msdiff.total_milliseconds() << std::endl; } Edit: It was only necessary to look at the combo-box selection of com-ports of wxTerm - no active connection was needed to be established in order to make my code work. I am guessing, that there is some sort of initialisation missing, which is done, when wxTerm is creating the list for the serial-port combo-box.

  Read the article

• Xcode App Crash-When connecting to the ODATA services [on hold]

  - by user3685677

  Can someone help me resolving the following issue: When trying to connect from iPad app to SAP ECC system through ODATA channel services via SUP, it is allowing me to login for the first time and could retrieve the data successfully from SAP system. But when I logout and try logging in again with the same session, application gets crashed. Below is the crash report for your reference. I am using SDM Parser to connect the SAP system. SDMODataServiceDocumentParser *sdmDocParser = [[SDMODataServiceDocumentParser alloc] init]; [sdmDocParser parse:aServiceDocument]; m_serviceDocument = sdmDocParser.serviceDocument; //Load the object with metadata xml: SDMODataMetaDocumentParser *sdmMetadataParser = [[SDMODataMetaDocumentParser alloc] initWithServiceDocument:m_serviceDocument]; [sdmMetadataParser parse:aMetadata]; After initiated the service, setting the URL. [service setServiceDocumentUrl:m_serviceDocumentURL]; Using SDMconnectivityhelper to connect the URL id<SDMRequesting> serviceDocumentRequest2 = [connectivityHelper executeBasicSyncRequestWithQuery3:[[ODataQuery alloc]initWithURL:[NSURL URLWithString:encodedStrUrl]]] ; - (id <SDMRequesting>)executeBasicSyncRequestWithQuery3:(ODataQuery *)aQuery { id<SDMRequesting> request = [self createRequestWithQuery:aQuery]; [request setTimeOutSeconds:TIMEOUT_SEC]; [request setRequestMethod:@"GET"]; [request addRequestHeader:@"Content-Type" value:@"application/xml"]; [request startSynchronous];**[App getting CRASH in this line]** return request; } - (id <SDMRequesting>)createRequestWithQuery:(ODataQuery *)aQuery { if (isSUPMode) { [SDMRequestBuilder setRequestType:SUPRequestType]; } else { [SDMRequestBuilder setRequestType:HTTPRequestType]; } id <SDMRequesting> request = [SDMRequestBuilder requestWithURL:aQuery.URL]; request.username = self.username; request.password = self.password; return request; } Crash Report:- Incident Identifier: 347511BA-5F7F-45D4-8662-D5DCD2F88EA7 CrashReporter Key: 9a4d38cf19b1a94476eb6b2170d4f56678d6ca60 Hardware Model: iPad3,4 Path: /var/mobile/Applications/F38AD64F-03F8-4A21- Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Subtype: KERN_INVALID_ADDRESS at 0x00000000 Triggered by Thread: 0 Thread 0 Crashed: 0 libsystem_platform.dylib 0x393a94c0 _platform_memmove$VARIANT $Swift + 160 1 Eby Sales Order 0x0015a2c8 0xb7000 + 668360 2 Eby Sales Order 0x0015a8b8 0xb7000 + 669880 3 Eby Sales Order 0x003331ee 0xb7000 + 2605550 4 Eby Sales Order 0x0031856e 0xb7000 + 2495854 5 Eby Sales Order 0x00338454 0xb7000 + 2626644 6 Eby Sales Order 0x000e6ad8 0xb7000 + 195288 7 Eby Sales Order 0x000e99a0 0xb7000 + 207264 8 Eby Sales Order 0x000ea442 0xb7000 + 209986 9 Eby Sales Order 0x000eb0d6 0xb7000 + 213206 10 Eby Sales Order 0x000c13d0 0xb7000 + 41936 11 Foundation 0x2ec93112 __NSFireDelayedPerform + 410 12 CoreFoundation 0x2e27ef4c __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 12 13 CoreFoundation 0x2e27eb66 __CFRunLoopDoTimer + 790 14 CoreFoundation 0x2e27ceee __CFRunLoopRun + 1214 15 CoreFoundation 0x2e1e7764 CFRunLoopRunSpecific + 520 16 CoreFoundation 0x2e1e7546 CFRunLoopRunInMode + 102 17 GraphicsServices 0x331216ce GSEventRunModal + 134 18 UIKit 0x30b4688c UIApplicationMain + 1132 19 Eby Sales Order 0x000bd8da 0xb7000 + 26842 20 Eby Sales Order 0x000bd89c 0xb7000 + 26780

  Read the article

• Announcing the release of the Windows Azure SDK 2.1 for .NET

  - by ScottGu

  Today we released the v2.1 update of the Windows Azure SDK for .NET.  This is a major refresh of the Windows Azure SDK and it includes some great new features and enhancements. These new capabilities include: Visual Studio 2013 Preview Support: The Windows Azure SDK now supports using the new VS 2013 Preview Visual Studio 2013 VM Image: Windows Azure now has a built-in VM image that you can use to host and develop with VS 2013 in the cloud Visual Studio Server Explorer Enhancements: Redesigned with improved filtering and auto-loading of subscription resources Virtual Machines: Start and Stop VM’s w/suspend billing directly from within Visual Studio Cloud Services: New Emulator Express option with reduced footprint and Run as Normal User support Service Bus: New high availability options, Notification Hub support, Improved VS tooling PowerShell Automation: Lots of new PowerShell commands for automating Web Sites, Cloud Services, VMs and more All of these SDK enhancements are now available to start using immediately and you can download the SDK from the Windows Azure .NET Developer Center.  Visual Studio’s Team Foundation Service (http://tfs.visualstudio.com/) has also been updated to support today’s SDK 2.1 release, and the SDK 2.1 features can now be used with it (including with automated builds + tests). Below are more details on the new features and capabilities released today: Visual Studio 2013 Preview Support Today’s Window Azure SDK 2.1 release adds support for the recent Visual Studio 2013 Preview. The 2.1 SDK also works with Visual Studio 2010 and Visual Studio 2012, and works side by side with the previous Windows Azure SDK 1.8 and 2.0 releases. To install the Windows Azure SDK 2.1 on your local computer, choose the “install the sdk” link from the Windows Azure .NET Developer Center. Then, chose which version of Visual Studio you want to use it with.  Clicking the third link will install the SDK with the latest VS 2013 Preview: If you don’t already have the Visual Studio 2013 Preview installed on your machine, this will also install Visual Studio Express 2013 Preview for Web. Visual Studio 2013 VM Image Hosted in the Cloud One of the requests we’ve heard from several customers has been to have the ability to host Visual Studio within the cloud (avoiding the need to install anything locally on your computer). With today’s SDK update we’ve added a new VM image to the Windows Azure VM Gallery that has Visual Studio Ultimate 2013 Preview, SharePoint 2013, SQL Server 2012 Express and the Windows Azure 2.1 SDK already installed on it.  This provides a really easy way to create a development environment in the cloud with the latest tools. With the recent shutdown and suspend billing feature we shipped on Windows Azure last month, you can spin up the image only when you want to do active development, and then shut down the virtual machine and not have to worry about usage charges while the virtual machine is not in use. You can create your own VS image in the cloud by using the New->Compute->Virtual Machine->From Gallery menu within the Windows Azure Management Portal, and then by selecting the “Visual Studio Ultimate 2013 Preview” template: Visual Studio Server Explorer: Improved Filtering/Management of Subscription Resources With the Windows Azure SDK 2.1 release you’ll notice significant improvements in the Visual Studio Server Explorer. The explorer has been redesigned so that all Windows Azure services are now contained under a single Windows Azure node.  From the top level node you can now manage your Windows Azure credentials, import a subscription file or filter Server Explorer to only show services from particular subscriptions or regions. Note: The Web Sites and Mobile Services nodes will appear outside the Windows Azure Node until the final release of VS 2013. If you have installed the ASP.NET and Web Tools Preview Refresh, though, the Web Sites node will appear inside the Windows Azure node even with the VS 2013 Preview. Once your subscription information is added, Windows Azure services from all your subscriptions are automatically enumerated in the Server Explorer. You no longer need to manually add services to Server Explorer individually. This provides a convenient way of viewing all of your cloud services, storage accounts, service bus namespaces, virtual machines, and web sites from one location: Subscription and Region Filtering Support Using the Windows Azure node in Server Explorer, you can also now filter your Windows Azure services in the Server Explorer by the subscription or region they are in.  If you have multiple subscriptions but need to focus your attention to just a few subscription for some period of time, this a handy way to hide the services from other subscriptions view until they become relevant. You can do the same sort of filtering by region. To enable this, just select “Filter Services” from the context menu on the Windows Azure node: Then choose the subscriptions and/or regions you want to filter by. In the below example, I’ve decided to show services from my pay-as-you-go subscription within the East US region: Visual Studio will then automatically filter the items that show up in the Server Explorer appropriately: With storage accounts and service bus namespaces, you sometimes need to work with services outside your subscription. To accommodate that scenario, those services allow you to attach an external account (from the context menu). You’ll notice that external accounts have a slightly different icon in server explorer to indicate they are from outside your subscription. Other Improvements We’ve also improved the Server Explorer by adding additional properties and actions to the service exposed. You now have access to most of the properties on a cloud service, deployment slot, role or role instance as well as the properties on storage accounts, virtual machines and web sites. Just select the object of interest in Server Explorer and view the properties in the property pane. We also now have full support for creating/deleting/update storage tables, blobs and queues from directly within Server Explorer.  Simply right-click on the appropriate storage account node and you can create them directly within Visual Studio: Virtual Machines: Start/Stop within Visual Studio Virtual Machines now have context menu actions that allow you start, shutdown, restart and delete a Virtual Machine directly within the Visual Studio Server Explorer. The shutdown action enables you to shut down the virtual machine and suspend billing when the VM is not is use, and easily restart it when you need it: This is especially useful in Dev/Test scenarios where you can start a VM – such as a SQL Server – during your development session and then shut it down / suspend billing when you are not developing (and no longer be billed for it). You can also now directly remote desktop into VMs using the “Connect using Remote Desktop” context menu command in VS Server Explorer.  Cloud Services: Emulator Express with Run as Normal User Support You can now launch Visual Studio and run your cloud services locally as a Normal User (without having to elevate to an administrator account) using a new Emulator Express option included as a preview feature with this SDK release.  Emulator Express is a version of the Windows Azure Compute Emulator that runs a restricted mode – one instance per role – and it doesn’t require administrative permissions and uses 40% less resources than the full Windows Azure Emulator. Emulator Express supports both web and worker roles. To run your application locally using the Emulator Express option, simply change the following settings in the Windows Azure project. On the shortcut menu for the Windows Azure project, choose Properties, and then choose the Web tab. Check the setting for IIS (Internet Information Services). Make sure that the option is set to IIS Express, not the full version of IIS. Emulator Express is not compatible with full IIS. On the Web tab, choose the option for Emulator Express. Service Bus: Notification Hubs With the Windows Azure SDK 2.1 release we are adding support for Windows Azure Notification Hubs as part of our official Windows Azure SDK, inside of Microsoft.ServiceBus.dll (previously the Notification Hub functionality was in a preview assembly). You are now able to create, update and delete Notification Hubs programmatically, manage your device registrations, and send push notifications to all your mobile clients across all platforms (Windows Store, Windows Phone 8, iOS, and Android). Learn more about Notification Hubs on MSDN here, or watch the Notification Hubs //BUILD/ presentation here. Service Bus: Paired Namespaces One of the new features included with today’s Windows Azure SDK 2.1 release is support for Service Bus “Paired Namespaces”.  Paired Namespaces enable you to better handle situations where a Service Bus service namespace becomes unavailable (for example: due to connectivity issues or an outage) and you are unable to send or receive messages to the namespace hosting the queue, topic, or subscription. Previously,to handle this scenario you had to manually setup separate namespaces that can act as a backup, then implement manual failover and retry logic which was sometimes tricky to get right. Service Bus now supports Paired Namespaces, which enables you to connect two namespaces together. When you activate the secondary namespace, messages are stored in the secondary queue for delivery to the primary queue at a later time. If the primary container (namespace) becomes unavailable for some reason, automatic failover enables the messages in the secondary queue. For detailed information about paired namespaces and high availability, see the new topic Asynchronous Messaging Patterns and High Availability. Service Bus: Tooling Improvements In this release, the Windows Azure Tools for Visual Studio contain several enhancements and changes to the management of Service Bus messaging entities using Visual Studio’s Server Explorer. The most noticeable change is that the Service Bus node is now integrated into the Windows Azure node, and supports integrated subscription management. Additionally, there has been a change to the code generated by the Windows Azure Worker Role with Service Bus Queue project template. This code now uses an event-driven “message pump” programming model using the QueueClient.OnMessage method. PowerShell: Tons of New Automation Commands Since my last blog post on the previous Windows Azure SDK 2.0 release, we’ve updated Windows Azure PowerShell (which is a separate download) five times. You can find the full change log here. We’ve added new cmdlets in the following areas: China instance and Windows Azure Pack support Environment Configuration VMs Cloud Services Web Sites Storage SQL Azure Service Bus China Instance and Windows Azure Pack We now support the following cmdlets for the China instance and Windows Azure Pack, respectively: China Instance: Web Sites, Service Bus, Storage, Cloud Service, VMs, Network Windows Azure Pack: Web Sites, Service Bus We will have full cmdlet support for these two Windows Azure environments in PowerShell in the near future. Virtual Machines: Stop/Start Virtual Machines Similar to the Start/Stop VM capability in VS Server Explorer, you can now stop your VM and suspend billing: If you want to keep the original behavior of keeping your stopped VM provisioned, you can pass in the -StayProvisioned switch parameter. Virtual Machines: VM endpoint ACLs We’ve added and updated a bunch of cmdlets for you to configure fine-grained network ACL on your VM endpoints. You can use the following cmdlets to create ACL config and apply them to a VM endpoint: New-AzureAclConfig Get-AzureAclConfig Set-AzureAclConfig Remove-AzureAclConfig Add-AzureEndpoint -ACL Set-AzureEndpoint –ACL The following example shows how to add an ACL rule to an existing endpoint of a VM. Other improvements for Virtual Machine management includes Added -NoWinRMEndpoint parameter to New-AzureQuickVM and Add-AzureProvisioningConfig to disable Windows Remote Management Added -DirectServerReturn parameter to Add-AzureEndpoint and Set-AzureEndpoint to enable/disable direct server return Added Set-AzureLoadBalancedEndpoint cmdlet to modify load balanced endpoints Cloud Services: Remote Desktop and Diagnostics Remote Desktop and Diagnostics are popular debugging options for Cloud Services. We’ve introduced cmdlets to help you configure these two Cloud Service extensions from Windows Azure PowerShell. Windows Azure Cloud Services Remote Desktop extension: New-AzureServiceRemoteDesktopExtensionConfig Get-AzureServiceRemoteDesktopExtension Set-AzureServiceRemoteDesktopExtension Remove-AzureServiceRemoteDesktopExtension Windows Azure Cloud Services Diagnostics extension New-AzureServiceDiagnosticsExtensionConfig Get-AzureServiceDiagnosticsExtension Set-AzureServiceDiagnosticsExtension Remove-AzureServiceDiagnosticsExtension The following example shows how to enable Remote Desktop for a Cloud Service. Web Sites: Diagnostics With our last SDK update, we introduced the Get-AzureWebsiteLog –Tail cmdlet to get the log streaming of your Web Sites. Recently, we’ve also added cmdlets to configure Web Site application diagnostics: Enable-AzureWebsiteApplicationDiagnostic Disable-AzureWebsiteApplicationDiagnostic The following 2 examples show how to enable application diagnostics to the file system and a Windows Azure Storage Table: SQL Database Previously, you had to know the SQL Database server admin username and password if you want to manage the database in that SQL Database server. Recently, we’ve made the experience much easier by not requiring the admin credential if the database server is in your subscription. So you can simply specify the -ServerName parameter to tell Windows Azure PowerShell which server you want to use for the following cmdlets. Get-AzureSqlDatabase New-AzureSqlDatabase Remove-AzureSqlDatabase Set-AzureSqlDatabase We’ve also added a -AllowAllAzureServices parameter to New-AzureSqlDatabaseServerFirewallRule so that you can easily add a firewall rule to whitelist all Windows Azure IP addresses. Besides the above experience improvements, we’ve also added cmdlets get the database server quota and set the database service objective. Check out the following cmdlets for details. Get-AzureSqlDatabaseServerQuota Get-AzureSqlDatabaseServiceObjective Set-AzureSqlDatabase –ServiceObjective Storage and Service Bus Other new cmdlets include Storage: CRUD cmdlets for Azure Tables and Queues Service Bus: Cmdlets for managing authorization rules on your Service Bus Namespace, Queue, Topic, Relay and NotificationHub Summary Today’s release includes a bunch of great features that enable you to build even better cloud solutions.  All the above features/enhancements are shipped and available to use immediately as part of the 2.1 release of the Windows Azure SDK for .NET. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• SOLVED Install MythTV & 11.10 on Lenovo S12 (Intel atom) with wireless

  - by keepitsimpleengineer

  This is how I installed Ubuntu 11.10 and MythTV client on my Lenovo S12 (Intel Atom) laptop and use it using WiFi (see additional notes at end). I did this because the upgrade from 11.04 bricked the laptop. Note that the partitions on the Lenovo standard disk were already in place for this installation. Also note that my LAN is setup for fixed IP addresses. Downloaded and burned 11.10 x86 Desktop Ubuntu CD Connected the power supply cord, LAN wire and the external DVD USB drive. Ran Windows XP and made sure performance level "Performance" was set and "Wireless" was enabled. Booted S12 from CD Disabled Networking from icon on upper left panel icon Edited Connections… "Wired connection 1" ? Set IP address, accepted default netmask and set gateway. Also set DNS server. Good idea to check "Connection Information" here to verify everything's O.K. Selected Install Ubuntu from the initial "Install" window Verified the three items were checked (required disk space available, plugged into a power source, & connected to the Internet) Selected Download updates while installing and third party software. Hit Continue… At wireless selected don't want to connect…WiFi…now. Continue… At Installation type, selected Something else. Continue… At partition tale, selected the ext4 Linux partition, set the mount point as "/", and marked for formatting. Here I selected the main disk (/sda) for installing the boot manager. Continue… Selected or verified my Time zone. Continue… Selected my keyboard layout. Continue… Filled in the who are you fields. Make sure password is required to sign in is checked. Continue… Chose a picture. Continue… I selected import no accounts. Continue… Wait as the Install creeps along. If your screen goes blank, tap the space bar ? apparently the screen saver/power plan does this. There are several progress bars. The longest was "Installing system", and it was the next to the last one. Installation Complete window appears, Restart Now… Wait as it stops, The screen blanks then the message "…remove…media…close tray…press enter" I just unplugged the USB DVD and hit enter… It was disheartening but the screen turned Ubuntu Purple-beige and nothing happened, so I help down the power key until it shut down, the pressed it again and the Grub Boot screen appeared. Select Ubuntu… 25.The screen went blank with the little flashing underscore cursor on it and the disk light would occasionally flash. I hit the enter key and eventuality Ubuntu started. After a somewhat long time the unity desktop appeared. 11.10, unlike earlier versions, retains the connection information. Check this by checking the network icon on the upper left applet panel. Here the touch-pad·mouse quit working and I had to reboot. It takes and extremely long time to boot, sometimes requiring several power off/ power on (cold boot). You can try to get the default network manager to work, but it might not, it didn't on mine for WiFi. Thanks to: Chris at URL here's what to do… disconnect your wired Internet connection. input your wireless information into network manager open a terminal (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "terminal". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. click to open a terminal, and type in: sudo rmmod acer_wmi && echo "blacklist acer_wmi" >> /etc/modprobe.d/blacklist.conf and hit enter. type in your password as asked. if you have correctly entered your WiFi information and you are near your AP, you should connect immediately if not, see the URL above ? you might need to replace "network manager" with "wicd" ? I did with 11.04. Update the new 11.10, in the upper left panel applet weird·gear icon is menu with a line about updating. It's the new way to invoke Update Manager. Your lenovo S12 (intel atom) should now run the new unity Ubuntu. Point your elbow at the ceiling and pat yourself on the back. Installing Mythbuntu Client 24.1 Open mythbuntu.org/repos (I urge you not to directly use Ubuntu Software Center for this) Install Mythbuntu Repos Save the file (in ~/Downloads, the default) Run the file ? it will update your repositories so that you will get the proper installation sources ? it will start Ubuntu Software Center to do this ? Click Install… You will need your password. Debconf window will open, select by making sure check mark is in the little box "Would you like to activate…". Forward… Which version? At the time of writing the current "Stable" version was 24.1, select 0.24.x… Forward… Read the message, then forward… Delete the downloaded file. Install synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "synaptic". Click on the synaptic icon. Ubuntu Software Center will open and allow you to install synaptic package manager. Open Synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "Synaptic". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. Run synaptic, read the intro, and close the intro window. Type in mythbuntu-control-centre in the Quick filter text box, and then select it "Mark for installation" by clicking on the box next to it's name. Marvel at the additional to be installed items, then select "?Mark"… At the top of the synaptic window click on the "? Apply" button. Marvel at the amount of stuff to be installed, the click on "Apply". When finished, close finished window and synaptic. Open mythbuntu-control-centre (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythbuntu". Might be a good idea to drag and drop the mythbuntu-control-centre icon to the terminal, it's easy to get rid of later. You can now configure and install the frontend. Go down the icon totem on the right side of the window and click as needed… System roles. ? No Backend, Desktop Frontend, and Ubuntu Desktop. Apply… & Apply changes… & Password… MySQL Configuration ? from backend ? Setup General Alt-N(ext) Alt-N(ext) Stetting Access Setup PIN code: ~~~~ Input Security key and click "Test Connection", if ?, then Apply… & Apply… {note: for some inexplicable reason, control centre hung on this, but when I restarted it, it was set properly} Graphics drivers, When I did this, only the Broadcom wireless driver showed up. I closed without doing anything. Services. I enabled SSH & Samba. Apply… & Apply… Repositories. Asked & Answered. MythExport. Pass, I believe it requires backend on the same system. Proprietary Codec Support. Check to enable, Apply… & Apply… System Updates. No action necessary, will be a part of the Ubuntu update mechanism. Themes and Artwork. For themes, I selected Enable/Update all. Apply… & Apply… Infrared & Startup behavior and Plugins. Defer until you know more. Close software centre. Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Incorrect Group Membership. Fix this by clicking "Yes"… Log out/end. Do this by clicking "Yes"… For my Lenovo S12, I had to manually restart Ubuntu - and still with the very long restart…/no start/cold boot/reboot/pressing the shift key required Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Will open with Select country & language. Do so. then get message with "No", hit "Ok" and arrive at the data base Configuration 1/2 screen. You will need your brackend password, from backend ? Setup General Database Configuration 1/2 Password:~? Enter this Hit Alt-n to go to the next page. Select "Use custom id…", then enter a custom ID, I use the machine's name. Hit finish, and MythTV should start up with all default settings. For the lenovo S12, the first thing you want to do is to set Playback profiles to "Normal". From Setup TV Settings Playback Alt-N(ext) Alt-N(ext) Playback Profiles (3/8) : Change Current Video Playback Profile to "Normal". You can fiddle with this setting later. For the lenovo S12, the second thing is to get the sound going. From Setup General Alt-N(ext) Alt-N(ext) Alt-N(ext) Audio System: The top of the screen is a button title "Scan for audio devices", move the highlight there and press the Space bar. Then Tab down to Audio Output Device: and left-right arrow until "ALSA:hw:Card=Intel,DEV=0" is selected. Then Alt-N(ext) until "Finish". Now you should have sound. You should now have MythTV working nicely on the Lenovo S12 Notes about wireless: Running Lenovo S12 on wireless is demanding on both power and WiFi connection. Best results will be obtained when running on power and wired connection. I run my S12 on wireless, actually two serial connections with two access points, something that is not easy to achieve. Here Mythbuntu client-server (in den) <? wireless link 1 <?office LAN? wireless link 2 <? Lenovo S12 Ubuntu 11.10 The office LAN is fixed IP behind an Untangle firewall router. There is another MythTV client on Ubuntu 10.10 computer in the office (which has always worked well). ProblemMythbuntu\Win7 client hangs with frozen frames, short segment of audio repeating. Hardware Rosewill RNX-G300EX IEEE 802.11b/g PCI Wireless Card on client-server 2 Linksys WRT54GL wireless broadband routers on LAN for link1 and link 2 WRT54GL FirmwareDD-WRT v24-sp2(07/22/09) voip set up to act as an access point. Note? many people advised this was an unworkable scheme, and in probably most cases it will be. Solution? Set up DD-WRT with the following Wireless settings… Basic Channel: Different fixed channels at least 4 difference, I use 6 & 11 Basic Sensitivity Range (ACK timing): 50 MAC filter use filter: Enable, Selected Permit only clients listed to access… Requires adding MAC addresses in "Edit MAC Filter List" This causes the 54GL's to ignore any but the listed MAC address, down side, no "guest" capability. Advanced Basic rate: All Advanced CTS Protection Mode: Off Advanced Frame Burst: Enable Advanced Max associate clients: 4 for client link 2, 1 for client-server link 1 Advanced AP isolation: Enable Advanced Preamble: Short Advanced Afterburner: On Advanced Wireless GUI access: Off Advanced WMM support: Off Other settings: default for supplied firmware. Why I suspect this worked? The 54GL Access Points's with the firmware's setting are set to handle a multiple client, wide area situation. With these mods I reconfigured them for a small area, few client situation, disabling Advanced WMM probably the most important. In addition, the client mythtv when used all other users of its access point are turned off except for a Skype phone. Also, the client-server is set up to allow other connections though it's LAN connection, and these are used to connect the TV and disc players, not used when client is being used.

  Read the article

• HP SmartArray P400: How to repair failed logical drive?

  - by TegtmeierDE

  I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I detected the error: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) unassigned physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) ~# I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed. Does someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: ~# /usr/sbin/hpacucli ctrl slot=0 array B add spares=2I:1:8 Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# Interestingly it is possible to add the unassigned drive to the first array without problems. I thought maybe the controller put the array into "failed" state due to the missing spare and protects failed arrays from modification. So I tried was to reenable the logicaldrive (to add the spare afterwards): ~# /usr/sbin/hpacucli ctrl slot=0 ld 2 modify reenable Warning: Any previously existing data on the logical drive may not be valid or recoverable. Continue? (y/n) y Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# But as you can see, re-enabling the logicaldrive this was not possible. Now I replaced the failed drive by hotswapping it with the unassigned drive. The status now looks like this: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) ~# The logical drive is still not accessible. Why is it not rebuilding? What can I do? FYI, this is the configuration of my controller: ~# /usr/sbin/hpacucli ctrl slot=0 show Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: XXXX Cache Serial Number: XXXX RAID 6 (ADG) Status: Enabled Controller Status: OK Chassis Slot: Hardware Revision: Rev E Firmware Version: 5.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Analysis Inconsistency Notification: Disabled Raid1 Write Buffering: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True ~# Thanks for you help in advance.

  Read the article

• Installing a clean Python 2.6 on SuSE (SLES) 11 using system-wide libraries

  - by optilude

  Hi, I've spent most of the day on this, and it is driving me absolutely insane. On all other Unixes I've used, this is a walk in the park, but SLES 11 has me dumbfounded. I need to build Zope on SLES 11 64 bit: Linux <name> 2.6.27.45-0.1-default #1 SMP 2010-02-22 16:49:47 +0100 x86_64 x86_64 x86_64 GNU/Linux I first tried to just use the YaST-installed Python 2.6. I've also installed python-devel, libjpeg-devel, readline-devel, libopenssl-devel, libz2-devel, zlib-devel, and libgcrypt-devel. The global python2.6 has a lot of cruft in it, and seems to execute stuff in /etc/pythonstart when I use it, which doesn't help. However, the error I get is this: Getting distribution for 'Zope2==2.12.3'. src/AccessControl/cAccessControl.c:596: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:598: warning: ‘intargfunc’ is deprecated src/AccessControl/cAccessControl.c:598: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:599: warning: ‘intargfunc’ is deprecated src/AccessControl/cAccessControl.c:599: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:600: warning: ‘intintargfunc’ is deprecated src/AccessControl/cAccessControl.c:600: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:601: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:602: warning: initialization from incompatible pointer type src/AccessControl/cAccessControl.c:606: warning: ‘intargfunc’ is deprecated src/AccessControl/cAccessControl.c:606: warning: initialization from incompatible pointer type /usr/lib64/gcc/x86_64-suse-linux/4.3/../../../../x86_64-suse-linux/bin/ld: skipping incompatible /usr/lib/libpython2.6.so when searching for -lpython2.6 /usr/lib64/gcc/x86_64-suse-linux/4.3/../../../../x86_64-suse-linux/bin/ld: cannot find -lpython2.6 collect2: ld returned 1 exit status error: Setup script exited with error: command 'gcc' failed with exit status 1 An error occured when trying to install Zope2 2.12.3. Look above this message for any errors that were output by easy_install. I don't know what "incompatible" is referring to here; my guess would be the hardware architecture, but I'm not sure what's incompatible with what in the statement above. I've had problems with system-installed Pythons before, so I tried to compile my own (hence the list of -devel packages above), downloading the Python 2.6 tarball and running: ./configure --disable-tk --prefix=${HOME}/python make make install This installs, but it seems to be unable to find any system-wide libraries. Here's a sample interpreter session: Python 2.6.5 (r265:79063, Mar 29 2010, 17:04:12) [GCC 4.3.2 [gcc-4_3-branch revision 141291]] on linux2 Type "help", "copyright", "credits" or "license" for more information. Traceback (most recent call last): File "/etc/pythonstart", line 7, in <module> import readline ImportError: No module named readline >>> from hashlib import md5 Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/home/osc/python-2.6/lib/python2.6/hashlib.py", line 136, in <module> md5 = __get_builtin_constructor('md5') File "/home/osc/python-2.6/lib/python2.6/hashlib.py", line 63, in __get_builtin_constructor import _md5 ImportError: No module named _md5 Both readline and hashlib (via libgrypt) should be installed, and the relevant -devel packages are also installed. On Ubuntu or OS X, this works just fine. On SuSE, no luck. Any help greatly appreciated! Martin

  Read the article

• Setting up Edimax EW-7206APg as Universal Repeater

  - by Ondra Žižka

  Hi, I've troubles setting up Edimax EW-7206APg as a Universal Repeater. I've read few manuals, but they are unclear on certain points. I've managed the repeater to get to a state when it's in a "connected" state. I've set the same WPA passphrase as the router has because I haven't seen any other place to set it at. These are my settings: System Uptime 0day:1h:33m:11s Hardware Version Rev. A Runtime Code Version 1.32 Wireless Configuration Mode Universal Repeater ESSID edimax Channel Number 6 Security WPA-shared key BSSID 00:c0:9f:40:bd:38 Associated Clients 0 Wireless Repeater Interface Configuration ESSID Dusan Security WPA BSSID 00:4f:62:23:8f:7e State Connected LAN Configuration IP Address 192.168.0.10 Subnet Mask 255.255.255.0 Default Gateway 192.168.0.1 MAC Address 00:c0:9f:40:bd:37 This is ipconfig /all: Prípona DNS podle pripojení . . . : riomail.cz Popis . . . . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection Fyzická Adresa. . . . . . . . . . : 00-0E-35-3D-77-68 Protokol DHCP povolen . . . . . . : Ano Automatická konfigurace povolena : Ano Adresa IP . . . . . . . . . . . . : 192.168.0.5 Maska podsíte . . . . . . . . . . : 255.255.255.0 Výchozí brána . . . . . . . . . . : 192.168.0.1 Server DHCP . . . . . . . . . . . : 192.168.0.1 Servery DNS . . . . . . . . . . . : 94.74.192.252 94.74.192.244 I can ping the repeater, I can ping the root AP, but not a DNS server or any other IP beyond the root AP. Anyone has an idea what's wrong? Thanks, Ondra

  Read the article

• Windows 7 Boot to VHD using a VHD clone of the system drive

  - by daveh551

  This seems like a not too difficult problem, and, after several hurdles, I'm maddeningly close. But I can't quite get there. I'm running Windows 7 in development shop. I want to start using VS2010 to work on some stuff that won't be released for awhile. My boss said no beta code on the production machine, but I could run VS2010 for this project IF I could do it in an isolated environment, like a virtual PC. Well, I've used the beta and RC of Win7 on VPC's before, and it was painfully slow because of the VPC environment. But everyone has been singing the praises of Windows 7's boot-to-VHD capability, where only the disk is virtualized, and you're actually running on the hardware. Supposed to be little slower, but nowhere near the speed penalty of VPC. I've spent a fair amount of time getting everything installed the way I want it. So I figured, I'll just clone my system drive using Disk2VHD, and boot off of that, and then install VS2010 onto that. (I keep most of my user data, including all my projects, in a separate partition, so that wouldn't have to be duplicated and would still be available.) Well, I had some difficulties with that, owing mainly to the fact that I was using an old version of Disk2VHD - (get the latest if you're going to try it.) But I did finally get it to boot. (Scott Hanselman has a good blog post on boot to VHD). But it wasn't exactly what I was expecting or hoping for. What I expected was that the VHD would become the C: drive, and the original (physical) C: drive would be either hidden or mounted under a different letter, and thus isolated and protected from any changes. What you actually get is that the VHD becomes the D: drive AND you boot from the D: drive, BUT your original C: drive is still there. Which is sort of okay EXCEPT that the Registry on the VHD is a clone of the Registry on C: drive, and includes many hard-coded references to C:. So the result is that some things come from (and modify) D: (the VHD), but some things come from (and modify) C:. (If you open a cmd prompt and do a SET to look at your environment variables, you will see a mixture of D:\ and C:\ paths.) So I don't really have an isolated environment. Most importantly, %ProgramFiles% is still set to C:\Program Files. What I really need is a tool that can access the registry files on the mounted VHD AS FILES, not as registry entries, and do a global search and replace on all the C:\ in strings to D:. I haven't found such a program. (I've tried to do it with a program called Registry Replace, but, even when running as Administrator, there are certain entries that the Registry won't let you change.) Does anyone know of one? Or any other solution to my problem (other than starting from scratch with a clean VHD and installing Win7 and all my programs on it.)?

  Read the article

• Ubuntu: Failure to login with multiple video adapters

  - by tsilb

  Forgive my ignorance, for I am a complete linux noob. I have a computer with three video cards and six monitors. Works great on Windows. Trying to get it to run Ubuntu as well. It loads fine when I have it configured to run on one adapter; detects both screens, runs ok. But I want to turn the other 4 monitors on and run the whole thing as one extended desktop (one session, etc). So I downloaded and installed the newest ATI driver for Linux, which seems to work, kinda. I ran this to set up the screens: aticonfig --adapter=all --initial -f Now when I boot, Ubuntu seems to turn on all the screens (3 viewports, each with two cloned displays from what I can tell). When I enter my login info OR move the mouse off the main screen, the screens freeze and the kbd/ms become unresponsive. aticonfig generated xorg.conf included below. Have tried the following: aticonfig -initial -f - works, but only detects the primary adapter and 2 screens aticccle - Tells me I have to reboot after enabling the other cards. Then goes into above described freezing state. aticonfig --adapter=all --initial -f - see above Manually editing xorg.conf file with my limited knowledge - Was able to get two adapters running, but only the second adapter initialized while the primary stopped at the Ubuntu boot screen. Was unable to see the login prompt. Froze after I logged in blindly (was able to hear the login sound). Using generic "radeon" driver instead of ATI Proprietary driver with the above init attempts Toggling xinerama Various combinations of the above Hardware: Intel Core 2 Quad q6600 8GB DDR2 (3x) ATI Radeon HD 4680 5 monitors (21W, 21W, 22W Portrait, 22W Portrait, 19")and an HDTV (26"W, HDMI) in a horizontal arrangement I know next to nothing about Linux/Ubuntu aside from basic filesystem navigation, editing text files, and accessing my local and networked Windows stores and shares. Basically this is the most advanced thing I've had to do. I installed today. Please advise how to make this configuration work. my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[2]-0" RightOf "aticonfig-Screen[1]-0" Option "RenderAccel" "true" Option "AllowGLXWithComposite" "true" EndSection Section "Files" EndSection Section "Module" EndSection Section "ServerFlags" Option "Xinerama" "0" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[2]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[2]-0" Driver "fglrx" BusID "PCI:4:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[2]-0" Device "aticonfig-Device[2]-0" Monitor "aticonfig-Monitor[2]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Apple Airport Express, Extreme and Time Capsules, BT Home Hub, Wireless Extenders confusion

  - by Jamie Hartnoll

  I post quite frequently in Stack Overflow, but use Superuser less frequently. Mainly as I don't change hardware often and rarely have software issues! I live in a small stone cottage, and have an office in a separate building across a yard. I have a BT Homehub which is located in the cottage and a series of Ethernet cables running across the yard to the office. This is fine for my wired stuff. My main office computers are PCs running Windows 7 Ultimate, and one on Win7 Home, all working fine. I also have an old laptop on Win XP which works fine wirelessly in the house for those evenings in front of the TV catching up on a bit of work. I also have an iPhone and an iPad. Recently, I have been trying to get WiFi in the office so I can use Adobe Shadow (or whatever it now is!) to improve mobile web development efficiency using my iPhone and iPad, so I bought this: http://www.ebuyer.com/393462-zyxel-wre2205-500mbps-powerline-wireless-n300-range-extender-wre2205-gb0101f Thinking that would be lovely just plugged into the socket by the door in the office, extending the perimeter of the WiFi from my Homehub. I can't get it to work properly! If I plug a laptop into its ethernet port I can get it to connect to the Homehub and give me a kinda of wired, wireless extender. If, however, I plug the ethernet port into my home hub, it then seems to extend the network, but only my iOs devices work, and all my wired stuff stops working, and seems to create an infinite loop where windows connects to my homehob, and then rather to the internet, it then connects back to the extender thing. Anyway... in the meantime, I took a fatal trip to the Apple Store, where I purchased an Airport Express... solely for the purpose of hooking my iOs devices up as wireless music players in the house. I knew it had WiFi, but didn't want to use that part as an extender, I didn't think it would work on a Homehub anyway. It doesn't work on a Homehub! I now have a new wireless network in the house, which, when anything connects to it cannot connect to the Internet, so it works ONLY as a wireless music player. I then borrowed some Powerline Adaptors from someone and realised that this whole thing was getting totally out of control! It seems all the technology is out there but it's so complicated to get the right series of devices. To further add to the confusion, I wouldn't mind a network hard drive. I bought one that broke and lost everything, so now we're on to looking at the Apple Time Capsules. So my question is... IF... I buy an Apple Time Capsule, can I: Hook that up to my Homehub, leaving the homehub connected to the Internet so my Hub phones still work, then disable wireless on the homehub Link up my Airport Express to the Time Capsule PROPERLY so it will connect to the Internet Do the above with an Apple TV box should I buy one in future Use the Time Capsule as a network hard drive to store video and music that can be viewed/listened to via my iOS devices/Apple TV/Aiport Express anywhere even with my main PC off (this currently stores all this data) Hope that the IOS devices like the WiFi from the TimeCapsule better than the Homehub and work without extension, or buy another Airport Express to get WiFI in the office. Or... should I buy an Airport Extreme and use a USB hard drive for the network drive?

  Read the article

< Previous Page | 403 404 405 406 407 408 409 410 411 412 413 414  | Next Page >