Search Results

Search found 10789 results on 432 pages for 'cpu upgrade'.

Page 408/432 | < Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415  | Next Page >

  • Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

    - by Eli
    Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

    Read the article

  • File server share access intermittent/slow/machine unstable: win2kr2

    - by Jack B.
    I have a file server running Win2k8R2 on an older HP DL380G4. It has nothing set up on it other than file sharing. All drivers/firmware/updates installed. The file server is used as a dump for a bunch of test machines - so essentially a lot of small files are being written to it. It was working fine until it started showing the following symptoms: Shares became either very slow/intermittent or could not access them at all. Logging in the the server, you could use it like normal but windows would start freezing and eventually you had to hard reboot it because nothing was responsive. After rebooting, it would work fine for 20min-2hours and then degrade into this broken state again. Some info after investigation: HP Raid Config utility shows the Raid array as functioning properly (RAID5 btw). Event log shows a bunch of DoS attacks from the test machines, saying it has disconnected the connection a. AFAIK (not part of my job) the test machines haven't changed the way they log information to this server or the amount of them hasn't increased. b. Nothing is infected, this server was scanned fully, and the test machines are re-imaged almost daily. Nothing in performance monitor shows as anything being pegged at maximum (CPU/HD/Network/RAM) I installed MS Network Monitor and it is showing a lot of traffic The server was using one gigabit Ethernet connection, I connected the second one as well with the same results. Forgot to add - one of the commonly written to dirs on the share has over 16k subdirs in it, with a crapton of small files within those dirs. Some of the OS instability was slow access to the drive which has this directory - perfmon doesn't show much activity on the HD though so I'm not sure if this crowded dir is the cause. Here is one important fact: I ran into this issue 2-3 months ago, couldn't figure it out, but I had a spare identical machine so I swapped them out (thought it was related to the machine), and now I have the same issue. Also, the computer will be stable if I turn off file sharing. So is the server just getting DoS'd by the test machines? I've never dealt with such an issue. Is instability in the server's OS common when getting DoS'd? Is there anything I can do to confirm this before telling the owners of the test machines to optimize their traffic? (I'm not sure what they'll be able to do). Is there something within Win2k8R2 that can balance the traffic across the two NICs? Any help would be appreciated. Update: Another thought - the drive with the share is RAID5 across 6 SCSI320 300GB HDs. They are near full capacity about 100GB from 1TB left. Could the amount of tiny files could be causing some weirdness with the parity in this array? I think I've read something about this in the past but I'm no expert on RAID.

    Read the article

  • mySQL Optimization Suggestions

    - by Brian Schroeter
    I'm trying to optimize our mySQL configuration for our large Magento website. The reason I believe that mySQL needs to be configured further is because New Relic has shown that our SELECT queries are taking a long time (20,000+ ms) in some categories. I ran MySQLTuner 1.3.0 and got the following results... (Disclaimer: I restarted mySQL earlier after tweaking some settings, and so the results here may not be 100% accurate): >> MySQLTuner 1.3.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering [OK] Currently running supported MySQL version 5.5.37-35.0 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: +ARCHIVE +BLACKHOLE +CSV -FEDERATED +InnoDB +MRG_MYISAM [--] Data in MyISAM tables: 7G (Tables: 332) [--] Data in InnoDB tables: 213G (Tables: 8714) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [--] Data in MEMORY tables: 0B (Tables: 353) [!!] Total fragmented tables: 5492 -------- Security Recommendations ------------------------------------------- [!!] User '@host5.server1.autopartsnetwork.com' has no password set. [!!] User '@localhost' has no password set. [!!] User 'root@%' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 5h 3m 4s (5M q [317.443 qps], 42K conn, TX: 18B, RX: 2B) [--] Reads / Writes: 95% / 5% [--] Total buffers: 35.5G global + 184.5M per thread (1024 max threads) [!!] Maximum possible memory usage: 220.0G (174% of installed RAM) [OK] Slow queries: 0% (6K/5M) [OK] Highest usage of available connections: 5% (61/1024) [OK] Key buffer size / total MyISAM indexes: 512.0M/3.1G [OK] Key buffer hit rate: 100.0% (102M cached / 45K reads) [OK] Query cache efficiency: 66.9% (3M cached / 5M selects) [!!] Query cache prunes per day: 3486361 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 812K sorts) [!!] Joins performed without indexes: 1328 [OK] Temporary tables created on disk: 11% (126K on disk / 1M total) [OK] Thread cache hit rate: 99% (61 created / 42K connections) [!!] Table cache hit rate: 19% (9K open / 49K opened) [OK] Open file limit used: 2% (712/25K) [OK] Table locks acquired immediately: 100% (5M immediate / 5M locks) [!!] InnoDB buffer pool / data size: 32.0G/213.4G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increasing the query_cache size over 128M may reduce performance Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 512M) [see warning above] join_buffer_size (> 128.0M, or always use indexes with joins) table_cache (> 12288) innodb_buffer_pool_size (>= 213G) My my.cnf configuration is as follows... [client] port = 3306 [mysqld_safe] nice = 0 [mysqld] tmpdir = /var/lib/mysql/tmp user = mysql port = 3306 skip-external-locking character-set-server = utf8 collation-server = utf8_general_ci event_scheduler = 0 key_buffer = 512M max_allowed_packet = 64M thread_stack = 512K thread_cache_size = 512 sort_buffer_size = 24M read_buffer_size = 8M read_rnd_buffer_size = 24M join_buffer_size = 128M # for some nightly processes client sessions set the join buffer to 8 GB auto-increment-increment = 1 auto-increment-offset = 1 myisam-recover = BACKUP max_connections = 1024 # max connect errors artificially high to support behaviors of NetScaler monitors max_connect_errors = 999999 concurrent_insert = 2 connect_timeout = 5 wait_timeout = 180 net_read_timeout = 120 net_write_timeout = 120 back_log = 128 # this table_open_cache might be too low because of MySQL bugs #16244691 and #65384) table_open_cache = 12288 tmp_table_size = 512M max_heap_table_size = 512M bulk_insert_buffer_size = 512M open-files-limit = 8192 open-files = 1024 query_cache_type = 1 # large query limit supports SOAP and REST API integrations query_cache_limit = 4M # larger than 512 MB query cache size is problematic; this is typically ~60% full query_cache_size = 512M # set to true on read slaves read_only = false slow_query_log_file = /var/log/mysql/slow.log slow_query_log = 0 long_query_time = 0.2 expire_logs_days = 10 max_binlog_size = 1024M binlog_cache_size = 32K sync_binlog = 0 # SSD RAID10 technically has a write capacity of 10000 IOPS innodb_io_capacity = 400 innodb_file_per_table innodb_table_locks = true innodb_lock_wait_timeout = 30 # These servers have 80 CPU threads; match 1:1 innodb_thread_concurrency = 48 innodb_commit_concurrency = 2 innodb_support_xa = true innodb_buffer_pool_size = 32G innodb_file_per_table innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 2G skip-federated [mysqldump] quick quote-names single-transaction max_allowed_packet = 64M I have a monster of a server here to power our site because our catalog is very large (300,000 simple SKUs), and I'm just wondering if I'm missing anything that I can configure further. :-) Thanks!

    Read the article

  • Tips / techniques for high-performance C# server sockets

    - by McKenzieG1
    I have a .NET 2.0 server that seems to be running into scaling problems, probably due to poor design of the socket-handling code, and I am looking for guidance on how I might redesign it to improve performance. Usage scenario: 50 - 150 clients, high rate (up to 100s / second) of small messages (10s of bytes each) to / from each client. Client connections are long-lived - typically hours. (The server is part of a trading system. The client messages are aggregated into groups to send to an exchange over a smaller number of 'outbound' socket connections, and acknowledgment messages are sent back to the clients as each group is processed by the exchange.) OS is Windows Server 2003, hardware is 2 x 4-core X5355. Current client socket design: A TcpListener spawns a thread to read each client socket as clients connect. The threads block on Socket.Receive, parsing incoming messages and inserting them into a set of queues for processing by the core server logic. Acknowledgment messages are sent back out over the client sockets using async Socket.BeginSend calls from the threads that talk to the exchange side. Observed problems: As the client count has grown (now 60-70), we have started to see intermittent delays of up to 100s of milliseconds while sending and receiving data to/from the clients. (We log timestamps for each acknowledgment message, and we can see occasional long gaps in the timestamp sequence for bunches of acks from the same group that normally go out in a few ms total.) Overall system CPU usage is low (< 10%), there is plenty of free RAM, and the core logic and the outbound (exchange-facing) side are performing fine, so the problem seems to be isolated to the client-facing socket code. There is ample network bandwidth between the server and clients (gigabit LAN), and we have ruled out network or hardware-layer problems. Any suggestions or pointers to useful resources would be greatly appreciated. If anyone has any diagnostic or debugging tips for figuring out exactly what is going wrong, those would be great as well. Note: I have the MSDN Magazine article Winsock: Get Closer to the Wire with High-Performance Sockets in .NET, and I have glanced at the Kodart "XF.Server" component - it looks sketchy at best.

    Read the article

  • <msbuild/> task fails while <devenv/> succeeds for MFC application in CruiseControl.NET?

    - by ee
    The Overview I am working on a Continuous Integration build of a MFC appliction via CruiseControl.net and VS2010. When building my .sln, a "Visual Studio" CCNet task (<devenv/>) works, but a simple MSBuild wrapper script (see below) run via the CCNet <msbuild/> task fails with errors like: error RC1015: cannot open include file 'winres.h'.. error C1083: Cannot open include file: 'afxwin.h': No such file or directory error C1083: Cannot open include file: 'afx.h': No such file or directory The Question How can I adjust the build environment of my msbuild wrapper so that the application builds correctly? (Pretty clearly the MFC paths aren't right for the msbuild environment, but how do i fix it for MSBuild+VS2010+MFC+CCNet?) Background Details We have successfully upgraded an MFC application (.exe with some MFC extension .dlls) to Visual Studio 2010 and can compile the application without issue on developer machines. Now I am working on compiling the application on the CI server environment I did a full installation of VS2010 (Professional) on the build server. In this way, I knew everything I needed would be on the machine (one way or another) and that this would be consistent with developer machines. VS2010 is correctly installed on the CI server, and the devenv task works as expected I now have a wrapper MSBuild script that does some extended version processing and then builds the .sln for the application via an MSBuild task. This wrapper script is run via CCNet's MSBuild task and fails with the above mentioned errors The Simple MSBuild Wrapper <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Target Name="Build"> <!-- Doing some versioning stuff here--> <MSBuild Projects="target.sln" Properties="Configuration=ReleaseUnicode;Platform=Any CPU;..." /> </Target> </Project> My Assumptions This seems to be a missing/wrong configuration of include paths to standard header resources of the MFC persuasion I should be able to coerce the MSBuild environment to consider the relevant resource files from my VS2010 install and have this approach work. Given the vs2010 msbuild support for visual c++ projects (.vcxproj), shouldn't msbuilding a solution be pretty close to compiling via visual studio? But how do I do that? Am I setting Environment variables? Registry settings? I can see how one can inject additional directories in some cases, but this seems to need a more systemic configuration at the compiler defaults level. Update 1 This appears to only ever happen in two cases: resource compilation (rc.exe), and precompiled header (stdafx.h) compilation, and only for certain projects? I was thinking it was across the board, but indeed it appears only to be in these cases. I guess I will keep digging and hope someone has some insight they would be willing to share...

    Read the article

  • Python Memory leak - Solved, but still puzzled

    - by disappearedng
    Dear everyone, I have successfully debugged my own memory leak problems. However, I have noticed some very strange occurence. for fid, fv in freqDic.iteritems(): outf.write(fid+"\t") #ID for i, term in enumerate(domain): #Vector tfidf = self.tf(term, fv) * self.idf( term, docFreqDic) if i == len(domain) - 1: outf.write("%f\n" % tfidf) else: outf.write("%f\t" % tfidf) outf.flush() print "Memory increased by", int(self.memory_mon.usage()) - startMemory outf.close() def tf(self, term, freqVector): total = freqVector[TOTAL] if total == 0: return 0 if term not in freqVector: ## When you don't have these lines memory leaks occurs return 0 ## return float(freqVector[term]) / freqVector[TOTAL] def idf(self, term, docFrequencyPerTerm): if term not in docFrequencyPerTerm: return 0 return math.log( float(docFrequencyPerTerm[TOTAL])/docFrequencyPerTerm[term]) Basically let me describe my problem: 1) I am doing tfidf calculations 2) I traced that the source of memory leaks is coming from defaultdict. 3) I am using the memory_mon from http://stackoverflow.com/questions/276052/how-to-get-current-cpu-and-ram-usage-in-python 4) The reason for my memory leaks is as follows: a) in self.tf, if the lines: if term not in freqVector: return 0 are not added that will cause the memory leak. (I verified this myself using memory_mon and noticed a sharp increase in memory that kept on increasing) The solution to my problem was 1) since fv is a defaultdict, any reference to it that are not found in fv will create an entry. Over a very large domain, this will cause memory leaks. I decided to use dict instead of default dict and the memory problem did go away. My only puzzle is: since fv is created in "for fid, fv in freqDic.iteritems():" shouldn't fv be destroyed at the end of every for loop? I tried putting gc.collect() at the end of the for loop but gc was not able to collect everything (returns 0). Yes, the hypothesis is right, but the memory should stay fairly consistent with ever for loop if for loops do destroy all temp variables. This is what it looks like with that two line in self.tf: Memory increased by 12 Memory increased by 948 Memory increased by 28 Memory increased by 36 Memory increased by 36 Memory increased by 32 Memory increased by 28 Memory increased by 32 Memory increased by 32 Memory increased by 32 Memory increased by 40 Memory increased by 32 Memory increased by 32 Memory increased by 28 and without the the two line: Memory increased by 1652 Memory increased by 3576 Memory increased by 4220 Memory increased by 5760 Memory increased by 7296 Memory increased by 8840 Memory increased by 10456 Memory increased by 12824 Memory increased by 13460 Memory increased by 15000 Memory increased by 17448 Memory increased by 18084 Memory increased by 19628 Memory increased by 22080 Memory increased by 22708 Memory increased by 24248 Memory increased by 26704 Memory increased by 27332 Memory increased by 28864 Memory increased by 30404 Memory increased by 32856 Memory increased by 33552 Memory increased by 35024 Memory increased by 36564 Memory increased by 39016 Memory increased by 39924 Memory increased by 42104 Memory increased by 42724 Memory increased by 44268 Memory increased by 46720 Memory increased by 47352 Memory increased by 48952 Memory increased by 50428 Memory increased by 51964 Memory increased by 53508 Memory increased by 55960 Memory increased by 56584 Memory increased by 58404 Memory increased by 59668 Memory increased by 61208 Memory increased by 62744 Memory increased by 64400 I look forward to your answer

    Read the article

  • Force SSRS 2008 to use SSRS 2005 CSV rendering

    - by Kash
    We are upgrading our report server from SSRS 2005 to SSRS 2008 R2. I have an issue with CSV export rendering for SSRS 2008 where the SUM of columns are appearing on the right side of the detail values in 2008 instead of the left side like in 2005 as shown in the below blocks. 117 and 131 are the sums of Column2 and Column3 respectively. SSRS 2005 CSV Output Column2_1,Column3_1,Column2,Column3 117,131,1,2 117,131,1,2 117,131,60,23 117,131,30,15 117,131,25,89 SSRS 2008 CSV Output Column2,Column3,Column2_1,Column3_1 1,2,117,131 1,2,117,131 60,23,117,131 30,15,117,131 25,89,117,131 I understand that the CSV renderer has gone through major changes in SSRS 2008 R2 with the support for charts and gauges and more importantly it provides 2 modes: the default Excel mode and Compliant mode. But neither mode helps fix this issue. The Compliant mode was supposed to be closest to that of 2005 but apparently it is not close enough for my case. My Question: Is there a way to force SSRS 2008 fall back a report to a backward compatibility mode so that it exports into a 2005 CSV format? Solution tried: a) Using 2005-based CRIs Based on this article on ExecutionLog2, if SSRS 2008 R2 encounters a report whose auto-upgrade is not possible (e.g. reports that were built with 2005-based CustomReportItem controls), those particular reports will be processed with the old Yukon engine in a "transparent backwards-compatibility mode". It seems like it falls back to its previous version mode (2005) and attempts to render it. So I tried using a 2005-based barcode CustomReportItem and deployed to a SSRS 2008 R2 report server, but it shows the same result as before though it suppressed the barcode. This would be because SSRS 2008 R2 finds a way to suppress part of the report output and displays the rest. It would be great to find a 2005-based CRI that makes SSRS 2008 R2 process it with its old Yukon engine. Please note that quite possibly, even if it uses the "old Yukon processing engine", it might still use the new CSV renderer hence it shows the same output. If that is true, then this option is moot. b) Using XML renderer We can use a custom XML renderer and then use XSLT to convert the xml to appropriate CSV but this would mean that we need to convert all our 200 reports. Hence this is not feasible. Please note that we do not have the option of having SSRS 2005 and SSRS 2008 R2 deployed side by side.

    Read the article

  • Build failing - VS2010 solution on TFS2008

    - by Nick
    I have migrated a VS2008 ASP.NET MVC solution to VS2010/MVC2/.NET 4.0 The solution builds locally and all unit tests pass. Our TFS server is still TFS2008 and I am having problems getting the CI build to pass. The projects all build successfully, the unit tests all run and pass but the Running Tests item fails. I followed this blog post on how to get the build working and I'm almost there. Combing the log file for failures I have found the following: Test Run Completed. Passed 1101 ------------ Total 1101 Results file: C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\TestResults\apptemetrybuild_ATT15DEV01 2010-04-27 09_09_59_Any CPU_Release.trx Test Settings: Default Test Settings Waiting to publish... Publishing results of test run apptemetrybuild@ATT15DEV01 2010-04-27 09:09:59_Any CPU_Release to http://att15tfs01:8080/... .....Publish completed successfully. Command: D:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\MSTest.exe /nologo /searchpathroot:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release" /resultsfileroot:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\TestResults" /testcontainer:"C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll" /publish:"http://att15tfs01:8080/" /publishbuild:"vstfs:///Build/Build/149" /teamproject:"Client Portal 3" /platform:"Any CPU" /flavor:"Release" The "TestToolsTask" task is using "MSTest.exe" from "D:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\MSTest.exe". Loading C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll... C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\\Attenda.Stargate.Security.Tests.dll Could not load file or assembly 'file:///C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\Binaries\Release\Attenda.Stargate.Security.Tests.dll' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded. MSBUILD : warning MSB6006: "MSTest.exe" exited with code 1. [C:\Documents and Settings\apptemetrybuild\Local Settings\Temp\Client Portal 3\CI\BuildType\TFSBuild.proj] The previous error was converted to a warning because the task was called with ContinueOnError=true. Build continuing because "ContinueOnError" on the task "TestToolsTask" is set to "true". Done executing task "TestToolsTask" -- FAILED. It looks like it's trying to use the 2008 MSTest tool even though I have specified ToolsVersion="4.0" in the tfsbuild.proj and changed the MSBuildPath in the TfsBuildService.exe.config on the build server. Can anyone point me in the right direction to get this to build successfully? Many thanks, Nick

    Read the article

  • Intermittent PolicyException: Execution permission cannot be acquired.

    - by Aaron Maenpaa
    We are intermittently seeing the following exception shortly after an App Pool recycle in an ASP.NET application: System.Configuration.ConfigurationErrorsException: Could not load file or assembly 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) ---> System.IO.FileLoadException: Could not load file or assembly 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant permission to execute. (Exception from HRESULT: 0x80131418) File name: 'Microsoft.Web.Mvc, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' ---> System.Security.Policy.PolicyException: Execution permission cannot be acquired. at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Boolean checkExecutionPermission) at System.Security.SecurityManager.ResolvePolicy(Evidence evidence, PermissionSet reqdPset, PermissionSet optPset, PermissionSet denyPset, PermissionSet& denied, Int32& securitySpecialFlags, Boolean checkExecutionPermission) at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String assemblyString) at System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) The specific DLL that fails to load varies from incident to incident, but is always one referenced by the main assembly. We're running on ASP.NET 3.5 on Windows Server 2008. This seems to happen in batches affecting some but not all of sites on the same App Pool. We have a large number of sites all running the same code. Once a site has failed to load a DLL it throws up a Yellow Screen of Death until the next App Pool recycle. We haven't been able to reproduce this behavior and the sites seem to work fine for days or weeks at a time (and many App Pool recycles) before failing. Has anybody else seen similar behavior? Update: We've tried reproducing the failure by setting up a few hundred sites and writing a script to hit them repeatedly while recycling the App Pool once every couple of minutes and were unable to accomplish much other than loading down the server's CPU for a few days straight. We then tried messing (locking one of the DLLs, changing the file permissions) with the copies of the DLLs that ASP.NET makes and managed to reproduce similar behavior but not the same exception. Does anybody have any ideas on how to adjust the security policy to get it to throw a System.Security.Policy.PolicyException: Execution permission cannot be acquired. when loading a specific DLL?

    Read the article

  • Eventlet or gevent or Stackless + Twisted, Pylons, Django and SQL Alchemy

    - by Khorkrak
    We're using Twisted extensively for apps requiring a great deal of asynchronous io. There are some cases where stuff is cpu bound instead and for that we spawn a pool of processes to do the work and have a system for managing these across multiple servers as well - all done in Twisted. Works great. The problem is that it's hard to bring new team members up to speed. Writing asynchronous code in Twisted requires a near vertical learning curve. It's as if humans just don't think that way naturally. We're considering a mixed approach perhaps. Maybe do the xmlrpc server part and process management in Twisted still but the other stuff in code that at least looks synchronous while not being as such. Then again I like explicit over implicit so hmmm. Anyway onto greenlets - how well does that stuff work? So there's Stackless and as you can see from my Gallentean avatar I'm well aware of the tremendous success in it's use for CCP's flagship EVE Online game first hand. What about Eventlet or gevent? Well for now only Eventlet works with Twisted. However gevent claims to be faster since it's not a pure python implementation it instead uses libevent. It also has fewer idiosyncrasies and defects supposedly. The documentation there is minimal in comparison to Eventlet and it's maintained by 1 guy as far as I can tell. This makes me leery but all great projects start this way so... Then there's PyPy - I haven't even finished reading about that one yet - just saw it in this thread: Drawbacks of Stackless. So confusing - I'm wondering what the heck to do - sounds like Eventlet is probably the best bet but is it really stable enough? Anyone out there have any experience with it? Should we go with Stackless instead as it's been around and is proven technology - just like Twisted is as well - and they do work together nicely. But still I hate having to have a separate version of Python to do this. what to do.... This somewhat obnoxious blog entry hit the nail on the head for me though: Asynchronous IO for Grownups We're stuck using MySQL as well - I never knew how great PostgreSQL was until having had to work on a production OLTP system in MySQL instead - but that's another story. But if that monkey patch thing really works then wow. Just wow.

    Read the article

  • Application Architecture using WCF and System.AddIn

    - by Silverhalide
    A little background -- we're designing an application that uses a client/server architecture consisting of: A server which loads server-side modules, potentially developed by other teams. A client which loads corresponding client-side modules (also potentially developed by those other teams; each client module corresponds with a server module). The client side communicates with the server side for general coordination, and as well as module specific tasks. (At this point, I think that means client talks to server, client modules talk to server modules.) Environment is .NET 3.5, and client side is WPF. The deployment scenario introduces the potential to upgrade the server, any server-side module, the client, and any client-side module independently. However, being able to "work" using mismatched versions is required. I'm therefore concerned about versioning issues. My thinking so far: A Windows Service for the server. Using System.AddIn for the server to load and communicate with the server modules will give us the greatest flexibility in terms of version compatability between server and server modules. The server and each server module vend WCF services for communication to the client side; communication between the server and a server module, or between two server modules use the AddIn contracts. (One advantage of this is that a module can expose a different interface within the server and outside it.) Similarly, the client uses System.AddIn to find, load, and communicate with the client modules. Client communications with client modules is via the AddIn interface; communications from the client and from client modules to the server side are via WCF. For maximum resilience, each module will run in a separate app-domain. In general, the system has modest performance requirements, so marshalling and crossing process boundaries is not expected to be a performance concern. (Performance requirement is basically summed up by: don't get in the way of the other parts of the system not described here.) My questions are around the idea of having two different communication and versioning models to work with which will be an added burden on our developers. System.AddIn seems quite powerful, but also a little unwieldly. (I'm also unsure of Microsoft's commitment to it in the future.) On the other hand, I'm not thrilled with WCF's versioning capabilities. I have a feeling that it would be possible to implement the System.AddIn view/adapter/contract system within WCF, but being fairly new to both technologies, I would have no idea of where to start. So... Am I on the right track here? Am I doing this the hard way? Are there gotchas I need to be aware of on this road? Thanks.

    Read the article

  • sharepoint search is not working

    - by Nikkho
    Hi all, I have an issue with SharePoint search. The situation The server is installed with SharePoint on a farm with 2 servers. A new app pool is created and that app pool is using a domain account called moss_service. moss_service is set to be in the administrator group in both server. moss_service is also set to be the db_creator in the content database. When I checked it initially, the search's default content access account is using another different account, I changed that to be using moss_service account. I didn't do IIS reset because this is a production server, they dont want frequent iis reset. Strangely, checking the services.msc under "office sharepoint server search" the account is still using an old one. (and apparently it's only running on 1 server, the other server is not running) I then change that to the following: domain\moss_service with the password. and then I rerun the crawl. How do I diagnose the issue Basically everytime I change something I restart the crawl and then check the event viewer. Multiple things come out but the following is the major ones: The start address cannot be crawled. The password for the content access account cannot be decrypted because it was stored with different credentials. Re-type the password for the account used to crawl this content. (0x80042406) Performance monitoring cannot be initialized for the gatherer object, because the counters are not loaded or the shared memory object cannot be opened. This only affects availability of the perfmon counters. Restart the computer. Access is denied. Check that the Default Content Access Account has access to this content, or add a crawl rule to crawl this content. (0x80041205) Crawl Logs Result The crawl log is showing this: The password for the content access account cannot be decrypted because it was stored with different credentials. Re-type the password for the account used to crawl this content. I tried changing it again at service.mstsc and the rerun the full crawl again but then it doesn't work. I have tried entering it using the following way: [email protected] and domain\moss_service My Questions are: How do I fix this? Is this the right way to setup the search? Does the search account has to be using a different domain account? Seemed like one fix complicates the other, how do I set this right? Is it worth it to upgrade to sp2?

    Read the article

  • "Bad binary signature" in ASP.NET MVC application

    - by David M
    We are getting the error above on some pages of an ASP.NET MVC application when it is deployed to a 64 bit Windows 2008 server box. It works fine on our development machines, though these are 32 bit XP. Just wondered if anyone had encountered this before, and has any suggestions? Details as follows: Bad binary signature. (Exception from HRESULT: 0x80131192) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: Bad binary signature. (Exception from HRESULT: 0x80131192) All projects are set to compile for Any CPU, and are compiled in Release mode. The ASP.NET site is precompiled, and the precompiled build is on a 64 bit Windows 2008 TeamCity build agent. Thanks in advance. EDIT We're still plagued by this. I have looked at all the binaries in the website's bin directory using corflags.exe. None has the 32BIT flag set, and all have a CorFlags value of 9 except for Antlr3.Runtime.dll which has a value of 1. The problem only affects certain pages, and it seems to be those which use FluentValidation (including FluentValidation.Mvc and FluentValidation.xValIntegration assemblies). None of these shows anything out of the ordinary when inspected with corflags.exe, and there are no odd looking dependencies revealed by ildasm. When built locally (32 bit Windows XP) the site deploys and runs fine. When built on the build agents (64 bit Windows 2008 Server) the site displays these errors. The site runs in Integrated Pipeline mode, and is not set to 32 bit. The stack trace is: [COMException (0x80131192): Bad binary signature. (Exception from HRESULT: 0x80131192)] ASP.views_user_newinternal_aspx.__RenderContent2(HtmlTextWriter __w, Control parameterContainer) in e:\TeamCity\buildAgent\work\605ee6b4a5d1dd36\...Admin.Mvc\Views\User\NewInternal.aspx:53 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 ASP.views_shared_site_master.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in e:\TeamCity\buildAgent\work\605ee6b4a5d1dd36\...Admin.Mvc\Views\Shared\Site.Master:26 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Page.Render(HtmlTextWriter writer) +38 System.Web.Mvc.ViewPage.Render(HtmlTextWriter writer) +94 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240

    Read the article

  • MongoMapper and migrations

    - by Clint Miller
    I'm building a Rails application using MongoDB as the back-end and MongoMapper as the ORM tool. Suppose in version 1, I define the following model: class SomeModel include MongoMapper::Document key :some_key, String end Later in version 2, I realize that I need a new required key on the model. So, in version 2, SomeModel now looks like this: class SomeModel include MongoMapper::Document key :some_key, String key :some_new_key, String, :required => true end How do I migrate all my existing data to include some_new_key? Assume that I know how to set a reasonable default value for all the existing documents. Taking this a step further, suppose that in version 3, I realize that I really don't need some_key at all. So, now the model looks like this class SomeModel include MongoMapper::Document key :some_new_key, String, :required => true end But all the existing records in my database have values set for some_key, and it's just wasting space at this point. How do I reclaim that space? With ActiveRecord, I would have just created migrations to add the initial values of some_new_key (in the version1 - version2 migration) and to delete the values for some_key (in the version2 - version3 migration). What's the appropriate way to do this with MongoDB/MongoMapper? It seems to me that some method of tracking which migrations have been run is still necessary. Does such a thing exist? EDITED: I think people are missing the point of my question. There are times where you want to be able to run a script on a database to change or restructure the data in it. I gave two examples above, one where a new required key was added and one where a key can be removed and space can be reclaimed. How do you manage running these scripts? ActiveRecord migrations give you an easy way to run these scripts and to determine what scripts have already been run and what scripts have not been run. I can obviously write a Mongo script that does any update on the database, but what I'm looking for is a framework like migrations that lets me track which upgrade scripts have already been run.

    Read the article

  • Problem in linking an nasm code

    - by Stefano
    I'm using a computer with an Intel Core 2 CPU and 2GB of RAM. The SO is Ubuntu 9.04. When I try to compile this code: ;programma per la simulazione di un terminale su PC, ottenuto utilizzando l'8250 ;in condizione di loopback , cioè Tx=Rx section .code64 section .data TXDATA EQU 03F8H ;TRASMETTITORE RXDATA EQU 03F8H ;RICEVITORE BAUDLSB EQU 03F8H ;DIVISORE DI BAUD RATE IN LSB BAUDMSB EQU 03F9H ;DIVISORE DI BAUD RATE IN MSB INTENABLE EQU 03F9H ;REGISTRO DI ABILITAZIONE DELL'INTERRUZIONE INTIDENTIF EQU 03FAH ;REGISTRO DI IDENTIFICAZIONE DELL'INTERRUZIONE LINECTRL EQU 03FBH ;REGISTRO DI CONTROLLO DELLA LINEA MODEMCTRL EQU 03FCH ;REGISTRO DI CONTROLLO DEL MODEM LINESTATUS EQU 03FDH ;REGISTRO DI STATO DELLA LINEA MODEMSTATUS EQU 03FEH ;REGISTRO DI STATO DEL MODEM BAUDRATEDIV DW 0060H ;DIVISOR: LOW=60, HIGH=00 -BAUD =9600 COUNTERCHAR DB 0 ;CHARACTER COUNTER ;DW 256 DUP (?) section .text global _start _start: ;PROGRAMMAZIONE 8250 MOV DX,LINECTRL MOV AL,80H ;BIT 7=1 PER INDIRIZZARE IL BAUD RATE OUT DX,AL MOV DX,BAUDLSB MOV AX,BAUDRATEDIV ;DEFINISCO FATTORE DI DIVISIONE OUT DX,AL MOV DX,BAUDMSB MOV AL,AH OUT DX,AL ;MSB MOV DX,LINECTRL MOV AL,00000011B ;8 BIT DATO, 1 STOP, PARITA' NO OUT DX,AL MOV DX,MODEMCTRL MOV AL,00010011B ;BIT 4=0 PER NO LOOPBACK OUT DX,AL MOV DX,INTENABLE XOR AL,AL ;DISABILITO TUTTI GLI INTERRUPTS OUT DX,AL CICLO: MOV DX,LINESTATUS IN AL,DX ;LEGGO IL REGISTRO DI STATO DELLA LINEA TEST AL,00011110B ;VERIFICO GLI ERRORI (4 TIPI) JNE ERRORI TEST AL,01H ;VERIFICO Rx PRONTO JNE LEGGOCHAR TEST AL,20H ;VERIFICO Tx VUOTO JE CICLO ;SE SI ARRIVA A QUESTO PUNTO ALLORA L'8250 è PRONTO PER TRASMETTERE UN NUOVO CARATTERE MOV AH,1 INT 80H JE CICLO ;SE SI ARRIVA A QUESTO PUNTO SIGNIFICA CHE ESISTE UN CARATTERE DA TASTIERA MOV AH,0 INT 80H ;Al CONTIENE IL CARATTERE DELLA TASTIERA MOV DX,3F8H OUT DX,AL JMP CICLO LEGGOCHAR: MOV AL,[COUNTERCHAR] INC AL CMP AL,15 JE FINE MOV [COUNTERCHAR],AL MOV DX,TXDATA IN AL,DX ;AL CONTIENE IL CARATTERE RICEVUTO AND AL,7FH ;POICHè VI SONO 7 BIT DI DATO ;VISUALIZZAZIONE DEL CARATTERE MOV BX,0 MOV AH,14 INT 80H POP AX CMP AL,0DH ;CONTROLLO SE RETURN JNE CICLO ;CAMBIO RIGA DI VISUALIZZAZIONE MOV AL,0AH MOV BX,0 MOV AH,14 ;INT 10H INT 80H JMP CICLO ;GESTIONE ERRORI ERRORI: MOV DX,3F8H IN AL,DX MOV AL,'?' MOV BX,0 MOV AH,14 INT 80H JMP CICLO FINE: XOR AH,AH MOV AL,03 INT 80H When I compile this code "NASM -f bin UARTLOOP.asm", the compiler can create the UARTLOOP.o file without any error. When I try to link the .o file with "ld UARTLOOP.o" it tells: UARTLOOP.o: In function `_start': UARTLOOP.asm:(.text+0xd): relocation truncated to fit: R_X86_64_16 against `.data' Have u got some ideas to solve this problem? Thx =)

    Read the article

  • ffmpeg - How to determine if -movflags faststart is enabled? PHP

    - by IIIOXIII
    While I am able to encode an mp4 file which I can plan on my local windows machine, I am having trouble encoding files to mp4 which are readable when streaming by safari, etc. After a bit of reading, I believe my issue is that I must move the metadata from the end of the file to the beginning in order for the converted mp4 files to be streamable. To that end, I am trying to find out if the build of ffmpeg that I am currently using is able to use the -movflags faststart option through php - as my current outputted mp4 files are not working when streamed online. This is the way I am now echoing the -help, -formats, -codecs, but I am not seeing anything about -movflags faststart in any of the lists: exec($ffmpegPath." -help", $codecArr); for($ii=0;$ii<count($codecArr);$ii++){ echo $codecArr[$ii].'</br>'; } Is there a similar method of determining if -movflags fastart is available to my ffmpeg build? Any other way? Should it be listed with any of the previously suggested commands? -help/-formats? Can someone that knows it is enabled in their version of ffmpeg check to see if it is listed under -help or -formats, etc.? TIA. EDIT: COMPLETE CONSOLE OUTPUT FOR BOTH THE CONVERSION COMMAND AND -MOVFLAGS COMMAND BELOW: COMMAND: ffmpeg_new -i C:\vidtests\Wildlife.wmv -s 640x480 C:\vidtests\Wildlife.mp4 OUTPUT: ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 [asf @ 00000000002ed760] Stream #0: not enough frames to estimate rate; consider increasing probesize Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from 'C:\vidtests\Wildlife.wmv' : Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 Duration: 00:00:30.09, start: 0.000000, bitrate: 6977 kb/s Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, fltp , 192 kb/s Stream #0:1(eng): Video: vc1 (Advanced) (WVC1 / 0x31435657), yuv420p, 1280x7 20, 5942 kb/s, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 00000000002e6980] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 00000000002e6980] profile High, level 3.0 [libx264 @ 00000000002e6980] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife.mp4': Metadata: SfOriginalFPS : 299700 WMFSDKVersion : 11.0.6001.7000 WMFSDKNeeded : 0.0.0.0000 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation IsVBR : 0 DeviceConformanceTemplate: AP@L3 encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (vc1 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libvo_aacenc) Press [q] to stop, [?] for help frame= 53 fps= 49 q=29.0 size= 0kB time=00:00:00.13 bitrate= 2.9kbits/ frame= 63 fps= 40 q=29.0 size= 0kB time=00:00:00.46 bitrate= 0.8kbits/ frame= 74 fps= 35 q=29.0 size= 0kB time=00:00:00.83 bitrate= 0.5kbits/ frame= 85 fps= 32 q=29.0 size= 0kB time=00:00:01.20 bitrate= 0.3kbits/ frame= 95 fps= 30 q=29.0 size= 0kB time=00:00:01.53 bitrate= 0.3kbits/ frame= 107 fps= 28 q=29.0 size= 0kB time=00:00:01.93 bitrate= 0.2kbits/ Queue input is backward in time [mp4 @ 00000000003ef800] Non-monotonous DTS in output stream 0:1; previous: 7616 , current: 7063; changing to 7617. This may result in incorrect timestamps in th e output file. frame= 118 fps= 28 q=29.0 size= 113kB time=00:00:02.30 bitrate= 402.6kbits/ frame= 129 fps= 26 q=29.0 size= 219kB time=00:00:02.66 bitrate= 670.7kbits/ frame= 141 fps= 26 q=29.0 size= 264kB time=00:00:03.06 bitrate= 704.2kbits/ frame= 152 fps= 25 q=29.0 size= 328kB time=00:00:03.43 bitrate= 782.2kbits/ frame= 163 fps= 25 q=29.0 size= 431kB time=00:00:03.80 bitrate= 928.1kbits/ frame= 174 fps= 24 q=29.0 size= 568kB time=00:00:04.17 bitrate=1116.3kbits/ frame= 190 fps= 25 q=29.0 size= 781kB time=00:00:04.70 bitrate=1359.9kbits/ frame= 204 fps= 25 q=29.0 size= 1006kB time=00:00:05.17 bitrate=1593.1kbits/ frame= 218 fps= 25 q=29.0 size= 1058kB time=00:00:05.63 bitrate=1536.8kbits/ frame= 229 fps= 25 q=29.0 size= 1093kB time=00:00:06.00 bitrate=1490.9kbits/ frame= 239 fps= 24 q=29.0 size= 1118kB time=00:00:06.33 bitrate=1444.4kbits/ frame= 251 fps= 24 q=29.0 size= 1150kB time=00:00:06.74 bitrate=1397.9kbits/ frame= 265 fps= 24 q=29.0 size= 1234kB time=00:00:07.20 bitrate=1402.3kbits/ frame= 278 fps= 25 q=29.0 size= 1332kB time=00:00:07.64 bitrate=1428.3kbits/ frame= 294 fps= 25 q=29.0 size= 1403kB time=00:00:08.17 bitrate=1405.7kbits/ frame= 308 fps= 25 q=29.0 size= 1547kB time=00:00:08.64 bitrate=1466.4kbits/ frame= 323 fps= 25 q=29.0 size= 1595kB time=00:00:09.14 bitrate=1429.5kbits/ frame= 337 fps= 25 q=29.0 size= 1702kB time=00:00:09.60 bitrate=1450.7kbits/ frame= 351 fps= 25 q=29.0 size= 1755kB time=00:00:10.07 bitrate=1427.1kbits/ frame= 365 fps= 25 q=29.0 size= 1820kB time=00:00:10.54 bitrate=1414.1kbits/ frame= 381 fps= 25 q=29.0 size= 1852kB time=00:00:11.07 bitrate=1369.6kbits/ frame= 396 fps= 26 q=29.0 size= 1893kB time=00:00:11.57 bitrate=1339.5kbits/ frame= 409 fps= 26 q=29.0 size= 1923kB time=00:00:12.01 bitrate=1311.8kbits/ frame= 421 fps= 25 q=29.0 size= 1967kB time=00:00:12.41 bitrate=1298.3kbits/ frame= 434 fps= 25 q=29.0 size= 1998kB time=00:00:12.84 bitrate=1274.0kbits/ frame= 445 fps= 25 q=29.0 size= 2018kB time=00:00:13.21 bitrate=1251.3kbits/ frame= 458 fps= 25 q=29.0 size= 2048kB time=00:00:13.64 bitrate=1229.5kbits/ frame= 471 fps= 25 q=29.0 size= 2067kB time=00:00:14.08 bitrate=1202.3kbits/ frame= 484 fps= 25 q=29.0 size= 2189kB time=00:00:14.51 bitrate=1235.5kbits/ frame= 497 fps= 25 q=29.0 size= 2260kB time=00:00:14.94 bitrate=1238.3kbits/ frame= 509 fps= 25 q=29.0 size= 2311kB time=00:00:15.34 bitrate=1233.3kbits/ frame= 523 fps= 25 q=29.0 size= 2429kB time=00:00:15.81 bitrate=1258.1kbits/ frame= 535 fps= 25 q=29.0 size= 2541kB time=00:00:16.21 bitrate=1283.5kbits/ frame= 548 fps= 25 q=29.0 size= 2718kB time=00:00:16.64 bitrate=1337.5kbits/ frame= 560 fps= 25 q=29.0 size= 2845kB time=00:00:17.05 bitrate=1367.1kbits/ frame= 571 fps= 25 q=29.0 size= 2965kB time=00:00:17.41 bitrate=1394.6kbits/ frame= 580 fps= 25 q=29.0 size= 3025kB time=00:00:17.71 bitrate=1398.7kbits/ frame= 588 fps= 25 q=29.0 size= 3098kB time=00:00:17.98 bitrate=1411.1kbits/ frame= 597 fps= 25 q=29.0 size= 3183kB time=00:00:18.28 bitrate=1426.1kbits/ frame= 606 fps= 24 q=29.0 size= 3279kB time=00:00:18.58 bitrate=1445.2kbits/ frame= 616 fps= 24 q=29.0 size= 3441kB time=00:00:18.91 bitrate=1489.9kbits/ frame= 626 fps= 24 q=29.0 size= 3650kB time=00:00:19.25 bitrate=1553.0kbits/ frame= 638 fps= 24 q=29.0 size= 3826kB time=00:00:19.65 bitrate=1594.7kbits/ frame= 649 fps= 24 q=29.0 size= 3950kB time=00:00:20.02 bitrate=1616.3kbits/ frame= 660 fps= 24 q=29.0 size= 4067kB time=00:00:20.38 bitrate=1634.1kbits/ frame= 669 fps= 24 q=29.0 size= 4121kB time=00:00:20.68 bitrate=1631.8kbits/ frame= 682 fps= 24 q=29.0 size= 4274kB time=00:00:21.12 bitrate=1657.9kbits/ frame= 696 fps= 24 q=29.0 size= 4446kB time=00:00:21.58 bitrate=1687.1kbits/ frame= 709 fps= 24 q=29.0 size= 4590kB time=00:00:22.02 bitrate=1707.3kbits/ frame= 719 fps= 24 q=29.0 size= 4772kB time=00:00:22.35 bitrate=1748.5kbits/ frame= 732 fps= 24 q=29.0 size= 4852kB time=00:00:22.78 bitrate=1744.3kbits/ frame= 744 fps= 24 q=29.0 size= 4973kB time=00:00:23.18 bitrate=1756.9kbits/ frame= 756 fps= 24 q=29.0 size= 5099kB time=00:00:23.59 bitrate=1770.8kbits/ frame= 768 fps= 24 q=29.0 size= 5149kB time=00:00:23.99 bitrate=1758.4kbits/ frame= 780 fps= 24 q=29.0 size= 5227kB time=00:00:24.39 bitrate=1755.7kbits/ frame= 797 fps= 24 q=29.0 size= 5377kB time=00:00:24.95 bitrate=1765.0kbits/ frame= 813 fps= 24 q=29.0 size= 5507kB time=00:00:25.49 bitrate=1769.5kbits/ frame= 828 fps= 24 q=29.0 size= 5634kB time=00:00:25.99 bitrate=1775.5kbits/ frame= 843 fps= 24 q=29.0 size= 5701kB time=00:00:26.49 bitrate=1762.9kbits/ frame= 859 fps= 24 q=29.0 size= 5830kB time=00:00:27.02 bitrate=1767.0kbits/ frame= 872 fps= 24 q=29.0 size= 5926kB time=00:00:27.46 bitrate=1767.7kbits/ frame= 888 fps= 24 q=29.0 size= 6014kB time=00:00:27.99 bitrate=1759.7kbits/ frame= 900 fps= 24 q=29.0 size= 6332kB time=00:00:28.39 bitrate=1826.9kbits/ frame= 901 fps= 24 q=-1.0 Lsize= 6717kB time=00:00:30.10 bitrate=1828.0kbits /s video:6211kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.513217% [libx264 @ 00000000002e6980] frame I:8 Avg QP:21.77 size: 39744 [libx264 @ 00000000002e6980] frame P:433 Avg QP:25.69 size: 11490 [libx264 @ 00000000002e6980] frame B:460 Avg QP:29.25 size: 2319 [libx264 @ 00000000002e6980] consecutive B-frames: 5.4% 78.6% 2.7% 13.3% [libx264 @ 00000000002e6980] mb I I16..4: 21.8% 48.8% 29.5% [libx264 @ 00000000002e6980] mb P I16..4: 0.7% 4.0% 1.3% P16..4: 37.1% 22.2 % 15.5% 0.0% 0.0% skip:19.2% [libx264 @ 00000000002e6980] mb B I16..4: 0.1% 0.5% 0.2% B16..8: 43.5% 7.0 % 2.1% direct: 2.2% skip:44.5% L0:36.4% L1:52.7% BI:10.9% [libx264 @ 00000000002e6980] 8x8 transform intra:62.8% inter:56.2% [libx264 @ 00000000002e6980] coded y,uvDC,uvAC intra: 74.2% 78.8% 44.0% inter: 2 3.6% 14.5% 1.0% [libx264 @ 00000000002e6980] i16 v,h,dc,p: 48% 24% 9% 20% [libx264 @ 00000000002e6980] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 16% 17% 15% 7% 8% 11% 8% 10% 8% [libx264 @ 00000000002e6980] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 17% 15% 7% 10% 11% 8% 7% 7% [libx264 @ 00000000002e6980] i8c dc,h,v,p: 53% 21% 18% 7% [libx264 @ 00000000002e6980] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 00000000002e6980] ref P L0: 62.4% 19.0% 12.0% 6.6% 0.0% [libx264 @ 00000000002e6980] ref B L0: 90.5% 8.9% 0.7% [libx264 @ 00000000002e6980] ref B L1: 97.9% 2.1% [libx264 @ 00000000002e6980] kb/s:1692.37 AND THE –MOVFLAGS COMMAND: C:\XSITE\SITE>ffmpeg_new -i C:\vidtests\Wildlife.mp4 -movflags faststart C:\vidtests\Wildlife_fs.mp4 AND THE –MOVFLAGS OUTPUT ffmpeg version N-54207-ge59fb3f Copyright (c) 2000-2013 the FFmpeg developers built on Jun 25 2013 21:55:00 with gcc 4.7.3 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-av isynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enab le-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetyp e --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --ena ble-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-l ibopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libsp eex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs -- enable-libxvid --enable-zlib libavutil 52. 37.101 / 52. 37.101 libavcodec 55. 17.100 / 55. 17.100 libavformat 55. 10.100 / 55. 10.100 libavdevice 55. 2.100 / 55. 2.100 libavfilter 3. 77.101 / 3. 77.101 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'C:\vidtests\Wildlife.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD encoder : Lavf55.10.100 comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball copyright : -¬ 2008 Microsoft Corporation Duration: 00:00:30.13, start: 0.036281, bitrate: 1826 kb/s Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x480, 1692 kb/s, 29.97 fps, 29.97 tbr, 30k tbn, 59.94 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 12 8 kb/s Metadata: handler_name : SoundHandler [libx264 @ 0000000004360620] using cpu capabilities: MMX2 SSE2Fast SSSE3 Cache64 [libx264 @ 0000000004360620] profile High, level 3.0 [libx264 @ 0000000004360620] 264 - core 133 r2334 a3ac64b - H.264/MPEG-4 AVC cod ec - Copyleft 2003-2013 - http://www.videolan.org/x264.html - options: cabac=1 r ef=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed _ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pski p=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 deci mate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_ adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=2 5 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.6 0 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'C:\vidtests\Wildlife_fs.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 title : Wildlife in HD copyright : -¬ 2008 Microsoft Corporation comment : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball encoder : Lavf55.10.100 Stream #0:0(eng): Video: h264 (libx264) ([33][0][0][0] / 0x0021), yuv420p, 6 40x480, q=-1--1, 30k tbn, 29.97 tbc Metadata: handler_name : VideoHandler Stream #0:1(eng): Audio: aac (libvo_aacenc) ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Metadata: handler_name : SoundHandler Stream mapping: Stream #0:0 -> #0:0 (h264 -> libx264) Stream #0:1 -> #0:1 (aac -> libvo_aacenc) Press [q] to stop, [?] for help frame= 52 fps=0.0 q=29.0 size= 29kB time=00:00:01.76 bitrate= 133.9kbits/ frame= 63 fps= 60 q=29.0 size= 104kB time=00:00:02.14 bitrate= 397.2kbits/ frame= 74 fps= 47 q=29.0 size= 176kB time=00:00:02.51 bitrate= 573.2kbits/ frame= 87 fps= 41 q=29.0 size= 265kB time=00:00:02.93 bitrate= 741.2kbits/ frame= 101 fps= 37 q=29.0 size= 358kB time=00:00:03.39 bitrate= 862.8kbits/ frame= 113 fps= 34 q=29.0 size= 437kB time=00:00:03.79 bitrate= 943.7kbits/ frame= 125 fps= 33 q=29.0 size= 520kB time=00:00:04.20 bitrate=1012.2kbits/ frame= 138 fps= 32 q=29.0 size= 606kB time=00:00:04.64 bitrate=1069.8kbits/ frame= 151 fps= 31 q=29.0 size= 696kB time=00:00:05.06 bitrate=1124.3kbits/ frame= 163 fps= 30 q=29.0 size= 780kB time=00:00:05.47 bitrate=1166.4kbits/ frame= 176 fps= 30 q=29.0 size= 919kB time=00:00:05.90 bitrate=1273.9kbits/ frame= 196 fps= 31 q=29.0 size= 994kB time=00:00:06.57 bitrate=1237.4kbits/ frame= 213 fps= 31 q=29.0 size= 1097kB time=00:00:07.13 bitrate=1258.8kbits/ frame= 225 fps= 30 q=29.0 size= 1204kB time=00:00:07.53 bitrate=1309.8kbits/ frame= 236 fps= 30 q=29.0 size= 1323kB time=00:00:07.91 bitrate=1369.4kbits/ frame= 249 fps= 29 q=29.0 size= 1451kB time=00:00:08.34 bitrate=1424.6kbits/ frame= 263 fps= 29 q=29.0 size= 1574kB time=00:00:08.82 bitrate=1461.3kbits/ frame= 278 fps= 29 q=29.0 size= 1610kB time=00:00:09.30 bitrate=1416.9kbits/ frame= 296 fps= 30 q=29.0 size= 1655kB time=00:00:09.91 bitrate=1368.0kbits/ frame= 313 fps= 30 q=29.0 size= 1697kB time=00:00:10.48 bitrate=1326.4kbits/ frame= 330 fps= 30 q=29.0 size= 1737kB time=00:00:11.05 bitrate=1286.5kbits/ frame= 345 fps= 30 q=29.0 size= 1776kB time=00:00:11.54 bitrate=1260.4kbits/ frame= 361 fps= 30 q=29.0 size= 1813kB time=00:00:12.07 bitrate=1230.3kbits/ frame= 377 fps= 30 q=29.0 size= 1847kB time=00:00:12.59 bitrate=1201.4kbits/ frame= 395 fps= 30 q=29.0 size= 1880kB time=00:00:13.22 bitrate=1165.0kbits/ frame= 410 fps= 30 q=29.0 size= 1993kB time=00:00:13.72 bitrate=1190.2kbits/ frame= 424 fps= 30 q=29.0 size= 2080kB time=00:00:14.18 bitrate=1201.4kbits/ frame= 439 fps= 30 q=29.0 size= 2166kB time=00:00:14.67 bitrate=1209.4kbits/ frame= 455 fps= 30 q=29.0 size= 2262kB time=00:00:15.21 bitrate=1217.5kbits/ frame= 469 fps= 30 q=29.0 size= 2341kB time=00:00:15.68 bitrate=1223.0kbits/ frame= 484 fps= 30 q=29.0 size= 2430kB time=00:00:16.19 bitrate=1229.1kbits/ frame= 500 fps= 30 q=29.0 size= 2523kB time=00:00:16.71 bitrate=1236.3kbits/ frame= 515 fps= 30 q=29.0 size= 2607kB time=00:00:17.21 bitrate=1240.4kbits/ frame= 531 fps= 30 q=29.0 size= 2681kB time=00:00:17.73 bitrate=1238.2kbits/ frame= 546 fps= 30 q=29.0 size= 2758kB time=00:00:18.24 bitrate=1238.2kbits/ frame= 561 fps= 30 q=29.0 size= 2824kB time=00:00:18.75 bitrate=1233.4kbits/ frame= 576 fps= 30 q=29.0 size= 2955kB time=00:00:19.25 bitrate=1256.8kbits/ frame= 586 fps= 29 q=29.0 size= 3061kB time=00:00:19.59 bitrate=1279.6kbits/ frame= 598 fps= 29 q=29.0 size= 3217kB time=00:00:19.99 bitrate=1318.4kbits/ frame= 610 fps= 29 q=29.0 size= 3354kB time=00:00:20.39 bitrate=1347.2kbits/ frame= 622 fps= 29 q=29.0 size= 3483kB time=00:00:20.78 bitrate=1372.6kbits/ frame= 634 fps= 29 q=29.0 size= 3593kB time=00:00:21.19 bitrate=1388.6kbits/ frame= 648 fps= 29 q=29.0 size= 3708kB time=00:00:21.66 bitrate=1402.3kbits/ frame= 661 fps= 29 q=29.0 size= 3811kB time=00:00:22.08 bitrate=1413.5kbits/ frame= 674 fps= 29 q=29.0 size= 3978kB time=00:00:22.53 bitrate=1446.3kbits/ frame= 690 fps= 29 q=29.0 size= 4133kB time=00:00:23.05 bitrate=1468.4kbits/ frame= 706 fps= 29 q=29.0 size= 4263kB time=00:00:23.58 bitrate=1480.4kbits/ frame= 721 fps= 29 q=29.0 size= 4391kB time=00:00:24.08 bitrate=1493.8kbits/ frame= 735 fps= 29 q=29.0 size= 4524kB time=00:00:24.55 bitrate=1509.4kbits/ frame= 748 fps= 29 q=29.0 size= 4661kB time=00:00:24.98 bitrate=1528.2kbits/ frame= 763 fps= 29 q=29.0 size= 4835kB time=00:00:25.50 bitrate=1553.1kbits/ frame= 778 fps= 29 q=29.0 size= 4993kB time=00:00:25.99 bitrate=1573.6kbits/ frame= 795 fps= 29 q=29.0 size= 5149kB time=00:00:26.56 bitrate=1588.1kbits/ frame= 814 fps= 29 q=29.0 size= 5258kB time=00:00:27.18 bitrate=1584.4kbits/ frame= 833 fps= 29 q=29.0 size= 5368kB time=00:00:27.82 bitrate=1580.2kbits/ frame= 851 fps= 29 q=29.0 size= 5469kB time=00:00:28.43 bitrate=1575.9kbits/ frame= 870 fps= 29 q=29.0 size= 5567kB time=00:00:29.05 bitrate=1569.5kbits/ frame= 889 fps= 29 q=29.0 size= 5688kB time=00:00:29.70 bitrate=1568.4kbits/ Starting second pass: moving header on top of the file frame= 902 fps= 28 q=-1.0 Lsize= 6109kB time=00:00:30.14 bitrate=1659.8kbits /s dup=1 drop=0 video:5602kB audio:472kB subtitle:0 global headers:0kB muxing overhead 0.566600% [libx264 @ 0000000004360620] frame I:8 Avg QP:20.52 size: 39667 [libx264 @ 0000000004360620] frame P:419 Avg QP:25.06 size: 10524 [libx264 @ 0000000004360620] frame B:475 Avg QP:29.03 size: 2123 [libx264 @ 0000000004360620] consecutive B-frames: 3.2% 79.6% 0.3% 16.9% [libx264 @ 0000000004360620] mb I I16..4: 20.7% 52.3% 26.9% [libx264 @ 0000000004360620] mb P I16..4: 0.7% 4.2% 1.1% P16..4: 39.4% 21.4 % 13.8% 0.0% 0.0% skip:19.3% [libx264 @ 0000000004360620] mb B I16..4: 0.1% 0.9% 0.3% B16..8: 41.8% 6.4 % 1.7% direct: 1.7% skip:47.1% L0:36.4% L1:53.3% BI:10.3% [libx264 @ 0000000004360620] 8x8 transform intra:65.7% inter:58.8% [libx264 @ 0000000004360620] coded y,uvDC,uvAC intra: 71.2% 76.6% 35.7% inter: 2 0.7% 13.0% 0.5% [libx264 @ 0000000004360620] i16 v,h,dc,p: 48% 24% 8% 20% [libx264 @ 0000000004360620] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 17% 18% 15% 6% 8% 11% 8% 10% 8% [libx264 @ 0000000004360620] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 16% 15% 7% 10% 11% 8% 8% 7% [libx264 @ 0000000004360620] i8c dc,h,v,p: 51% 22% 19% 9% [libx264 @ 0000000004360620] Weighted P-Frames: Y:0.7% UV:0.0% [libx264 @ 0000000004360620] ref P L0: 63.4% 19.7% 11.0% 5.9% 0.0% [libx264 @ 0000000004360620] ref B L0: 90.7% 8.7% 0.7% [libx264 @ 0000000004360620] ref B L1: 98.4% 1.6% [libx264 @ 0000000004360620] kb/s:1524.54

    Read the article

  • Android Marketplace Error: "The server could not process your apk. Try again."

    - by jdandrea
    I have an updated apk - tested successfully on various devices and simulator instances - with the following manifest: <?xml version="1.0" encoding="utf-8"?> <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.myCompany.appName" android:versionCode="2" android:versionName="1.0.1"> <uses-sdk android:minSdkVersion="3" android:targetSdkVersion="5" /> <uses-permission android:name="android.permission.INTERNET" /> <supports-screens android:largeScreens="true" android:normalScreens="true" android:smallScreens="true" /> <application android:icon="@drawable/icon" android:label="@string/icon_name" android:debuggable="false"> <activity android:name=".myActivity" android:configChanges="keyboardHidden|orientation"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> </application> </manifest> When I post to Android Marketplace as an upgrade to my existing 1.0 app, I get the aforementioned ambiguous message: "The server could not process your apk. Try again." I've searched elsewhere for this message in hopes of finding out what might be happening, to no avail. (A popular suggestion is to move the uses-sdk element to the top of the manifest, but as you can see it's already at the top.) Clues welcome/appreciated. Update: I just tried to upload the same file again. Now I get a new message: The new apk's versionCode (2) in AndroidManifest.xml must be higher than the old apk's versionCode (2). The server could not process your apk. Try again. Soooo Marketplace did get my upgraded apk after all? (The very first accepted apk's versionCode was 1, so this update was of course bumped to 2.) Confused … Bumping it up to 3 and trying again. Surprise surprise, I get the original "could not process" error all over again. Going in circles. Hmm ... :( Nuther Update: If I exit and re-enter the Marketplace page, now it shows that the app has been uploaded! Except there's no app icon. Curiouser and curiouser ... and this is all happening with a cache-cleared (standards-friendly) browser to boot. So - do I trust the upload? Or start over ... with versionCode="4"? All I want is to get a solid "Upload successful, here's the icon, ready to publish" type of response.

    Read the article

  • Which version of MSXML should I use?

    - by Cheeso
    Seems like this would be a common question, though I could not find it on SO. Which version of MSXML should I use in my applications, and more importantly, how should I decide? There is MSXML3, 4, 5 and 6. I recently posted some code in calling-wcf-service-by-vbscript that used MSXML v4. AnthonyWJones posted that I shouldn't use 4, but instead 3 or 6, but probably 3. Certainly not v5! Why? I'd like to know more about the criteria for selecting the version of MSXML to use in my apps. Bonus question: Does anyone have a summary of the differences between the various versions of MSXML over time? Summary so far: MSXML6 Should be first choice. was released in 2006, and includes perf and compliance fixes. Use this if you can. It's good. There are no merge modules; to bundle the MSXML6 runtime with your app, MS suggests packaging the MSXML6 msi file. MSXML6 is an upgrade from MSXML3/4 but does not replace them, because it discontinues some features. You can get the MSI here. MSXML3 Second choice. Most widely deployed version. Originally shipped in March 2000. Actively maintained, no new features. Currently supported, if you are on SP5 (shipped in 2005) or later. SP7 is current (also from 2005). MSXML5 was released only as part of MS-Office. Currently supported by Microsoft, but only as part of Office, not for building apps. Don't build apps that depend on MSXML5: Verboten. MSXML4 originally shipped? Currently in "maintenance mode". Microsoft is encouraging people to move off MSXML4 to MSXML6. Currently supported if you are on MSXML4SP2 or later, which shipped in 2003. download MSXML4SP2 here. Can be redisributed. Using the right version of MSXML in Internet Explorer is a good entry on the blog from Microsoft's xmlteam.

    Read the article

  • ASP.Net Web Farm Monitoring

    - by cisellis
    I am looking for suggestions on doing some simple monitoring of an ASP.Net web farm as close to real-time as possible. The objectives of this question are to: Identify the best way to monitor several Windows Server production boxes during short (minutes long) period of ridiculous load Receive near-real-time feedback on a few key metrics about each box. These are simple metrics available via WMI such as CPU, Memory and Disk Paging. I am defining my time constraints as soon as possible with 120 seconds delayed being the absolute upper limit. Monitor whether any given box is up (with "up" being defined as responding web requests in a reasonable amount of time) Here are more details, things I've tried, etc. I am not interested in logging. We have logging solutions in place. I have looked at solutions such as ELMAH which don't provide much in the way of hardware monitoring and are not visible across an entire web farm. ASP.Net Health Monitoring is too broad, focuses too much on logging and is not acceptable for deep analysis. We are on Amazon Web Services and we have looked into CloudWatch. It looks great but messages in the forum indicate that the metrics are often a few minutes behind, with one thread citing 2 minutes as the absolute soonest you could expect to receive the feedback. This would be good to have for later analysis but does not help us real-time Stuff like JetBrains profiler is good for testing but again, not helpful during real-time monitoring. The closest out-of-box solution I've seen is Nagios which is free and appears to measure key indicators on any kind of box, including Windows. However, it appears to require a Linux box to run itself on and a good deal of manual configuration. I'd prefer to not spend my time mining config files and then be up a creek when it fails in production since Linux is not my main (or even secondary) environment. Are there any out-of-box solutions that I am missing? Obviously a windows-based solution that is easy to setup is ideal. I don't require many bells and whistles. In the absence of an out-of-box solution, it seems easy for me to write something simple to handle what I need. I've been thinking a simple client-server setup where the server requests a few WMI metrics from each client over http and sticks them in a database. We could then monitor the metrics via a query or a dashboard or something. If the client doesn't respond, it's effectively down. Any problems with this, best practices, or other ideas? Thanks for any help/feedback.

    Read the article

  • CCNet web dashboard not showing anything when MSBuild fails

    - by cfdev9
    I have a simple project in ccnet using svn & msbuild only. There is a 30 second trigger for svn and the msbuild file compiles a web application then copies it to a numbered build folder. When an error occurs in the msbuild task I get a failed build. When I view a failed build in the web dashboard I can see the 'Modifications since last build' section in the dashboard, but nothing else. I have to click on the build log and read through all of the xml in the error log to see what the error was. Why won't the dashboard show the errors from the build log? I haven't changed anything in the dashboard.config since installing ccnet. Dashboard Version : 1.5.7256.1 <project name="SimpleWebapp1"> <artifactDirectory>C:\Program Files\CruiseControl.NET\server\SimpleWebapp1\Artifacts\</artifactDirectory> <triggers> <intervalTrigger name="continuous" seconds="30" buildCondition="IfModificationExists" initialSeconds="5" /> </triggers> <sourcecontrol type="svn"> <executable>C:\Program Files\CollabNet\Subversion Client\svn.exe</executable> <trunkUrl>https://server:8443/svn/SimpleWebapp1/trunk</trunkUrl> <workingDirectory>D:\CCNetSandbox\SimpleWebapp1</workingDirectory> <username>username</username> <password>password</password> </sourcecontrol> <tasks> <msbuild> <executable> C:\WINDOWS\Microsoft.NET\Framework\v3.5\MSBuild.exe </executable> <workingDirectory> D:\CCNetSandbox\SimpleWebapp1 </workingDirectory> <projectFile>SimpleWebapp1.build</projectFile> <buildArgs>/p:Configuration=Debug /p:Platform="Any CPU"</buildArgs> <targets>CompileLatest</targets> <timeout>900</timeout> <logger>ThoughtWorks.CruiseControl.MsBuild.XMLLogger, C:\Program Files\CruiseControl.NET\server\ThoughtWorks.CruiseControl.MsBuild.dll</logger> </msbuild> </tasks> <publishers> <xmllogger /> <buildpublisher> <publishDir>C:\Program Files\CruiseControl.NET\server\SimpleWebapp1\Artifacts\</publishDir> <useLabelSubDirectory>true</useLabelSubDirectory> </buildpublisher> </publishers> </project>

    Read the article

  • Run bat file in Java and wait 2

    - by Savvas Dalkitsis
    This is a followup question to my other question : http://stackoverflow.com/questions/2434125/run-bat-file-in-java-and-wait The reason i am posting this as a separate question is that the one i already asked was answered correctly. From some research i did my problem is unique to my case so i decided to create a new question. Please go read that question before continuing with this one as they are closely related. Running the proposed code blocks the program at the waitFor invocation. After some research i found that the waitFor method blocks if your process has output that needs to be proccessed so you should first empty the output stream and the error stream. I did those things but my method still blocks. I then found a suggestion to simply loop while waiting the exitValue method to return the exit value of the process and handle the exception thrown if it is not, pausing for a brief moment as well so as not to consume all the CPU. I did this: import java.io.BufferedReader; import java.io.IOException; import java.io.InputStreamReader; public class Test { public static void main(String[] args) { try { Process p = Runtime.getRuntime().exec( "cmd /k start SQLScriptsToRun.bat" + " -UuserName -Ppassword" + " projectName"); final BufferedReader input = new BufferedReader(new InputStreamReader(p.getInputStream())); final BufferedReader error = new BufferedReader(new InputStreamReader(p.getErrorStream())); new Thread(new Runnable() { @Override public void run() { try { while (input.readLine()!=null) {} } catch (IOException e) { e.printStackTrace(); } } }).start(); new Thread(new Runnable() { @Override public void run() { try { while (error.readLine()!=null) {} } catch (IOException e) { e.printStackTrace(); } } }).start(); int i = 0; boolean finished = false; while (!finished) { try { i = p.exitValue(); finished = true; } catch (IllegalThreadStateException e) { e.printStackTrace(); try { Thread.sleep(500); } catch (InterruptedException e1) { e1.printStackTrace(); } } } System.out.println(i); } catch (IOException e) { e.printStackTrace(); } } } but my process will not end! I keep getting this error: java.lang.IllegalThreadStateException: process has not exited Any ideas as to why my process will not exit? Or do you have any libraries to suggest that handle executing batch files properly and wait until the execution is finished?

    Read the article

  • Segmentation fault when creating a Phonon MediaObject

    - by Luke Hansford
    I have music playing program made using PySide which uses Phonon to playback audio. I updated to MacOS X Mavericks a few days ago, which meant I needed to reinstall PySide. I'm not sure which of these actions has caused this, but now whenever I try to create a Phonon MediaObject I get a Segmentation Fault: 11 from Python. It's not just in my program, it happens when trying to create a MediaObject in Python without any other actions. I'm getting the following error message from my Mac whenever it crashes: Process: Python [13711] Path: /usr/local/Cellar/python/2.7.5/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python Identifier: org.python.python Version: 2.7.5 (2.7.5) Code Type: X86-64 (Native) Parent Process: bash [13707] Responsible: Terminal [13704] User ID: 501 Date/Time: 2013-11-01 19:47:53.164 +1000 OS Version: Mac OS X 10.9 (13A603) Report Version: 11 Anonymous UUID: C2686854-18CA-9D37-26E9-60050E3C4DA6 Sleep/Wake UUID: BB983BF6-CCE2-44D1-82A0-1C73382DFFE4 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008 VM Regions Near 0x8: --> __TEXT 00000001082e8000-00000001082e9000 [ 4K] r-x/rwx SM=COW /usr/local/Cellar/python/2.7.5/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 QtCore 0x000000010a1b34cb QObject::moveToThread(QThread*) + 17 1 QtDBus 0x000000010d55f98b QDBusDefaultConnection::QDBusDefaultConnection(QDBusConnection::BusType, char const*) + 171 2 QtDBus 0x000000010d55ebdf QDBusConnection::sessionBus() + 71 3 phonon 0x000000010d50228d Phonon::FactoryPrivate::FactoryPrivate() + 189 4 phonon 0x000000010d5024d5 Phonon::$_249::operator->() + 99 5 phonon 0x000000010d502991 Phonon::Factory::registerFrontendObject(Phonon::MediaNodePrivate*) + 17 6 phonon 0x000000010d50b27e Phonon::MediaNodePrivate::MediaNodePrivate(Phonon::MediaNodePrivate::CastId) + 80 7 phonon 0x000000010d50f570 Phonon::MediaObjectPrivate::MediaObjectPrivate() + 24 8 phonon 0x000000010d50be9d Phonon::MediaObject::MediaObject(QObject*) + 45 9 phonon.so 0x000000010d42f24a Sbk_Phonon_MediaObject_Init + 458 10 org.python.python 0x0000000108338707 type_call + 189 11 org.python.python 0x00000001082f74fd PyObject_Call + 101 12 org.python.python 0x00000001083714f0 PyEval_EvalFrameEx + 15525 13 org.python.python 0x0000000108373aaf fast_function + 182 14 org.python.python 0x0000000108370919 PyEval_EvalFrameEx + 12494 15 org.python.python 0x000000010836d721 PyEval_EvalCodeEx + 1638 16 org.python.python 0x000000010836d0b5 PyEval_EvalCode + 54 17 org.python.python 0x000000010838beb8 run_mod + 53 18 org.python.python 0x000000010838bf5f PyRun_FileExFlags + 137 19 org.python.python 0x000000010838baad PyRun_SimpleFileExFlags + 718 20 org.python.python 0x000000010839c58b Py_Main + 3039 21 libdyld.dylib 0x00007fff8e4fb5fd start + 1 Thread 1:: Dispatch queue: com.apple.libdispatch-manager 0 libsystem_kernel.dylib 0x00007fff8c938662 kevent64 + 10 1 libdispatch.dylib 0x00007fff923e743d _dispatch_mgr_invoke + 239 2 libdispatch.dylib 0x00007fff923e7152 _dispatch_mgr_thread + 52 Thread 2: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 3: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 4: 0 libsystem_kernel.dylib 0x00007fff8c937e6a __workq_kernreturn + 10 1 libsystem_pthread.dylib 0x00007fff90bd8f08 _pthread_wqthread + 330 2 libsystem_pthread.dylib 0x00007fff90bdbfb9 start_wqthread + 13 Thread 0 crashed with X86 Thread State (64-bit): rax: 0x00007feba0d19700 rbx: 0x000000010d5b7098 rcx: 0x00000000002f4180 rdx: 0x000000000012c040 rdi: 0x0000000000000000 rsi: 0x00007feba0d19700 rbp: 0x00007fff57917210 rsp: 0x00007fff579171d0 r8: 0x00007feba0fd5d10 r9: 0x00007feba0ff5310 r10: 0x0000000019c04cbe r11: 0x0000000070769b38 r12: 0x00007fff57917220 r13: 0x00007feba0c07190 r14: 0x0000000000000000 r15: 0x00007feba0fe1430 rip: 0x000000010a1b34cb rfl: 0x0000000000010202 cr2: 0x0000000000000008 Logical CPU: 0 Error Code: 0x00000004 Trap Number: 14 Anyone have any ideas about what is happening?

    Read the article

  • How to do role-based access control for a franchise business?

    - by FreshCode
    I'm building the 2nd iteration of a web-based CRM+CMS for a franchise service business in ASP.NET MVC 2. I need to control access to each franchise's services based on the roles a user is assigned for that franchise. 4 examples: Receptionist should be able to book service jobs in for her "Atlantic Seaboard" franchise, but not do any reporting. Technician should be able to alter service jobs, but not modify invoices. Managers should be able to apply discount to invoices for jobs within their stores. Owner should be able to pull reports for any franchises he owns. Where should franchise-level access control fit in between the Data - Services - Web layer? If it belongs in my Controllers, how should I best implement it? Partial Schema Roles class int ID { get; set; } // primary key for Role string Name { get; set; } Partial Franchises class short ID { get; set; } // primary key for Franchise string Slug { get; set; } // unique key for URL access, eg /{franchise}/{job} string Name { get; set; } UserRoles mapping short FranchiseID; // related to franchises table Guid UserID; // related to Users table int RoleID; // related to Roles table DateTime ValidFrom; DateTime ValidUntil; Background I built the previous CRM in classic ASP and it runs the business well, but it's time for an upgrade to speed up workflow and leave less room for error. For the sake of proper testing and better separation between data and presentation, I decided to implement the repository pattern as seen in Rob Conery's MVC Storefront series. Controller Implementation Access Control with [Authorize] attribute If there was just one franchise involved, I could simply limit access to a controller action like so: [Authorize(Roles="Receptionist, Technician, Manager, Owner")] public ActionResult CreateJob(Job job) { ... } And since franchises don't just pop up over night, perhaps this is a strong case to use the new Areas feature in ASP.NET MVC 2? Or would this lead to duplicate Views? Controllers, URL Routing & Areas Assuming Areas aren't used, what would be the best way to determine which franchise's data is being accessed? I thought of this: {franchise}/{controller}/{action}/{id} or is it better to determine a job's franchise in a Details(...) action and limit a user's action with [Authorize]: {job}/{id}/{action}/{subaction} {invoice}/{id}/{action}/{subaction} which makes more sense if any user could potentially have access to more than one franchise without cluttering the URL with a {franchise} parameter. Any input is appreciated.

    Read the article

  • Mercurial over ssh client and server on Windows

    - by Ben Von Handorf
    I'm trying to configure Mercurial for use with both a windows server (freeSSHd) and client (both command line and TortoiseHG). I'm using the most recent versions of everything... all downloaded in the past few days. Using public key auth, I have been able to get connected to the server and I'm able to use plink to execute "hg version" and get a response, but when I try to clone a repository from the ssh server the command appears to hang. Running with -v yields: hg -v clone ssh://<username>@<server>//hg/repositoryA testRepositoryA running "plink.exe -i "<path to private key file>" <username>@<server> "hg -R /hg/repositoryA serve --stdio"" with nothing more forthcoming. Running the hg serve command directly on the server yields an apparently responsive Mercurial server, but the clients do not seem to make any further requests. Running "hg serve" in the repository directory and cloning over http works perfectly. What should I be looking for to help debug this? Is there something the clients (hg and TortoiseHG) aren't sending to continue the request stream? Additional Information: If I change to an invalid repository on the target machine, the appropriate error is displayed, so it does appear that the remote hg is running and correctly evaluating the path. Running with --debug and --traceback results in: sending hello command sending between command It hangs here, until I CTRL-C Traceback (most recent call last): File "mercurial\dispatch.pyo", line 46, in _runcatch File "mercurial\dispatch.pyo", line 452, in _dispatch File "mercurial\dispatch.pyo", line 320, in runcommand File "mercurial\dispatch.pyo", line 504, in _runcommand File "mercurial\dispatch.pyo", line 457, in checkargs File "mercurial\dispatch.pyo", line 451, in <lambda> File "mercurial\util.pyo", line 402, in check File "mercurial\commands.pyo", line 636, in clone File "mercurial\hg.pyo", line 187, in clone File "mercurial\hg.pyo", line 63, in repository File "mercurial\sshrepo.pyo", line 51, in __init__ File "mercurial\sshrepo.pyo", line 73, in validate_repo KeyboardInterrupt interrupted! Responding to Ryan: There does not appear to be any CPU usage or increasing memory usage on the server. It appears to be waiting for the client to send a request or something similar. 11/19/2009 : More information: The problem is definitely in the freeSSHd/server side of the equation. Connecting to bitbucket over ssh with the same keyset works fine. Still working on this.

    Read the article

  • Modify PHP Search Script to Handle Multiple Entries For a Single Input

    - by Thomas
    I need to modify a php search script so that it can handle multiple entries for a single field. The search engine is designed for a real estate website. The current search form allows users to search for houses by selecting a single neighborhood from a dropdown menu. Instead of a dropdown menu, I would like to use a list of checkboxes so that the the user can search for houses in multiple neighborhoods at one time. I have converted all of the dropdown menu items into checkboxes on the HTML side but the PHP script only searches for houses in the last checkbox selected. For example, if I selected: 'Dallas' 'Boston' 'New York' the search engine will only search for houses in New York. Im new to PHP, so I am a little at a loss as to how to modify this script to handle the behavior I have described: <?php require_once(dirname(__FILE__).'/extra_search_fields.php'); //Add Widget for configurable search. add_action('plugins_loaded',array('DB_CustomSearch_Widget','init')); class DB_CustomSearch_Widget extends DB_Search_Widget { function DB_CustomSearch_Widget($params=array()){ DB_CustomSearch_Widget::__construct($params); } function __construct($params=array()){ $this->loadTranslations(); parent::__construct(__('Custom Fields ','wp-custom-fields-search'),$params); add_action('admin_print_scripts', array(&$this,'print_admin_scripts'), 90); add_action('admin_menu', array(&$this,'plugin_menu'), 90); add_filter('the_content', array(&$this,'process_tag'),9); add_shortcode( 'wp-custom-fields-search', array(&$this,'process_shortcode') ); wp_enqueue_script('jquery'); if(version_compare("2.7",$GLOBALS['wp_version'])>0) wp_enqueue_script('dimensions'); } function init(){ global $CustomSearchFieldStatic; $CustomSearchFieldStatic['Object'] = new DB_CustomSearch_Widget(); $CustomSearchFieldStatic['Object']->ensureUpToDate(); } function currentVersion(){ return "0.3.16"; } function ensureUpToDate(){ $version = $this->getConfig('version'); $latest = $this->currentVersion(); if($version<$latest) $this->upgrade($version,$latest); } function upgrade($current,$target){ $options = $this->getConfig(); if(version_compare($current,"0.3")<0){ $config = $this->getDefaultConfig(); $config['name'] = __('Default Preset','wp-custom-fields-search'); $options['preset-default'] = $config; } $options['version']=$target; update_option($this->id,$options); } function getInputs($params = false,$visitedPresets=array()){ if(is_array($params)){ $id = $params['widget_id']; } else { $id = $params; } if($visitedPresets[$id]) return array(); $visitedPresets[$id]=true; global $CustomSearchFieldStatic; if(!$CustomSearchFieldStatic['Inputs'][$id]){ $config = $this->getConfig($id); $inputs = array(); if($config['preset']) $inputs = $this->getInputs($config['preset'],$visitedPresets); $nonFields = $this->getNonInputFields(); if($config) foreach($config as $k=>$v){ if(in_array($k,$nonFields)) continue; if(!(class_exists($v['input']) && class_exists($v['comparison']) && class_exists($v['joiner']))) { continue; } $inputs[] = new CustomSearchField($v); } foreach($inputs as $k=>$v){ $inputs[$k]->setIndex($k); } $CustomSearchFieldStatic['Inputs'][$id]=$inputs; } return $CustomSearchFieldStatic['Inputs'][$id]; } function getTitle($params){ $config = $this->getConfig($params['widget_id']); return $config['name']; } function form_processPost($post,$old){ unset($post['###TEMPLATE_ID###']); if(!$post) $post=array('exists'=>1); return $post; } function getDefaultConfig(){ return array('name'=>'Site Search', 1=>array( 'label'=>__('Key Words','wp-custom-fields-search'), 'input'=>'TextField', 'comparison'=>'WordsLikeComparison', 'joiner'=>'PostDataJoiner', 'name'=>'all' ), 2=>array( 'label'=>__('Category','wp-custom-fields-search'), 'input'=>'DropDownField', 'comparison'=>'EqualComparison', 'joiner'=>'CategoryJoiner' ), ); } function form_outputForm($values,$pref){ $defaults=$this->getDefaultConfig(); $prefId = preg_replace('/^.*\[([^]]*)\]$/','\\1',$pref); $this->form_existsInput($pref); $rand = rand(); ?> <div id='config-template-<?php echo $prefId?>' style='display: none;'> <?php $templateDefaults = $defaults[1]; $templateDefaults['label'] = 'Field ###TEMPLATE_ID###'; echo $this->singleFieldHTML($pref,'###TEMPLATE_ID###',$templateDefaults); ?> </div> <?php foreach($this->getClasses('input') as $class=>$desc) { if(class_exists($class)) $form = new $class(); else $form = false; if(compat_method_exists($form,'getConfigForm')){ if($form = $form->getConfigForm($pref.'[###TEMPLATE_ID###]',array('name'=>'###TEMPLATE_NAME###'))){ ?> <div id='config-input-templates-<?php echo $class?>-<?php echo $prefId?>' style='display: none;'> <?php echo $form?> </div> <?php } } } ?> <div id='config-form-<?php echo $prefId?>'> <?php if(!$values) $values = $defaults; $maxId=0; $presets = $this->getPresets(); array_unshift($presets,__('NONE','wp-custom-fields-search')); ?> <div class='searchform-name-wrapper'><label for='<?php echo $prefId?>[name]'><?php echo __('Search Title','wp-custom-fields-search')?></label><input type='text' class='form-title-input' id='<?php echo $prefId?>[name]' name='<?php echo $pref?>[name]' value='<?php echo $values['name']?>'/></div> <div class='searchform-preset-wrapper'><label for='<?php echo $prefId?>[preset]'><?php echo __('Use Preset','wp-custom-fields-search')?></label> <?php $dd = new AdminDropDown($pref."[preset]",$values['preset'],$presets); echo $dd->getInput()."</div>"; $nonFields = $this->getNonInputFields(); foreach($values as $id => $val){ $maxId = max($id,$maxId); if(in_array($id,$nonFields)) continue; echo "<div id='config-form-$prefId-$id'>".$this->singleFieldHTML($pref,$id,$val)."</div>"; } ?> </div> <br/><a href='#' onClick="return CustomSearch.get('<?php echo $prefId?>').add();"><?php echo __('Add Field','wp-custom-fields-search')?></a> <script type='text/javascript'> CustomSearch.create('<?php echo $prefId?>','<?php echo $maxId?>'); <?php foreach($this->getClasses('joiner') as $joinerClass=>$desc){ if(compat_method_exists($joinerClass,'getSuggestedFields')){ $options = eval("return $joinerClass::getSuggestedFields();"); $str = ''; foreach($options as $i=>$v){ $k=$i; if(is_numeric($k)) $k=$v; $options[$i] = json_encode(array('id'=>$k,'name'=>$v)); } $str = '['.join(',',$options).']'; echo "CustomSearch.setOptionsFor('$joinerClass',".$str.");\n"; }elseif(eval("return $joinerClass::needsField();")){ echo "CustomSearch.setOptionsFor('$joinerClass',[]);\n"; } } ?> </script> <?php } function getNonInputFields(){ return array('exists','name','preset','version'); } function singleFieldHTML($pref,$id,$values){ $prefId = preg_replace('/^.*\[([^]]*)\]$/','\\1',$pref); $pref = $pref."[$id]"; $htmlId = $pref."[exists]"; $output = "<input type='hidden' name='$htmlId' value='1'/>"; $titles="<th>".__('Label','wp-custom-fields-search')."</th>"; $inputs="<td><input type='text' name='$pref"."[label]' value='$values[label]' class='form-field-title'/></td><td><a href='#' onClick='return CustomSearch.get(\"$prefId\").toggleOptions(\"$id\");'>".__('Show/Hide Config','wp-custom-fields-search')."</a></td>"; $output.="<table class='form-field-table'><tr>$titles</tr><tr>$inputs</tr></table>"; $output.="<div id='form-field-advancedoptions-$prefId-$id' style='display: none'>"; $inputs='';$titles=''; $titles="<th>".__('Data Field','wp-custom-fields-search')."</th>"; $inputs="<td><div id='form-field-dbname-$prefId-$id' class='form-field-title-div'><input type='text' name='$pref"."[name]' value='$values[name]' class='form-field-title'/></div></td>"; $count=1; foreach(array('joiner'=>__('Data Type','wp-custom-fields-search'),'comparison'=>__('Compare','wp-custom-fields-search'),'input'=>__('Widget','wp-custom-fields-search')) as $k=>$v){ $dd = new AdminDropDown($pref."[$k]",$values[$k],$this->getClasses($k),array('onChange'=>'CustomSearch.get("'.$prefId.'").updateOptions("'.$id.'","'.$k.'")','css_class'=>"wpcfs-$k")); $titles="<th>".$v."</th>".$titles; $inputs="<td>".$dd->getInput()."</td>".$inputs; if(++$count==2){ $output.="<table class='form-field-table form-class-$k'><tr>$titles</tr><tr>$inputs</tr></table>"; $count=0; $inputs = $titles=''; } } if($titles){ $output.="<table class='form-field-table'><tr>$titles</tr><tr>$inputs</tr></table>"; $inputs = $titles=''; } $titles.="<th>".__('Numeric','wp-custom-fields-search')."</th><th>".__('Widget Config','wp-custom-fields-search')."</th>"; $inputs.="<td><input type='checkbox' ".($values['numeric']?"checked='true'":"")." name='$pref"."[numeric]'/></td>"; if(class_exists($widgetClass = $values['input'])){ $widget = new $widgetClass(); if(compat_method_exists($widget,'getConfigForm')) $widgetConfig=$widget->getConfigForm($pref,$values); } $inputs.="<td><div id='$this->id"."-$prefId"."-$id"."-widget-config'>$widgetConfig</div></td>"; $output.="<table class='form-field-table'><tr>$titles</tr><tr>$inputs</tr></table>"; $output.="</div>"; $output.="<a href='#' onClick=\"return CustomSearch.get('$prefId').remove('$id');\">Remove Field</a>"; return "<div class='field-wrapper'>$output</div>"; } function getRootURL(){ return WP_CONTENT_URL .'/plugins/' . dirname(plugin_basename(__FILE__) ) . '/'; } function print_admin_scripts($params){ $jsRoot = $this->getRootURL().'js'; $cssRoot = $this->getRootURL().'css'; $scripts = array('Class.js','CustomSearch.js','flexbox/jquery.flexbox.js'); foreach($scripts as $file){ echo "<script src='$jsRoot/$file' ></script>"; } echo "<link rel='stylesheet' href='$cssRoot/admin.css' >"; echo "<link rel='stylesheet' href='$jsRoot/flexbox/jquery.flexbox.css' >"; } function getJoiners(){ return $this->getClasses('joiner'); } function getComparisons(){ return $this->getClasses('comparison'); } function getInputTypes(){ return $this->getClasses('input'); } function getClasses($type){ global $CustomSearchFieldStatic; if(!$CustomSearchFieldStatic['Types']){ $CustomSearchFieldStatic['Types'] = array( "joiner"=>array( "PostDataJoiner" =>__( "Post Field",'wp-custom-fields-search'), "CustomFieldJoiner" =>__( "Custom Field",'wp-custom-fields-search'), "CategoryJoiner" =>__( "Category",'wp-custom-fields-search'), "TagJoiner" =>__( "Tag",'wp-custom-fields-search'), "PostTypeJoiner" =>__( "Post Type",'wp-custom-fields-search'), ), "input"=>array( "TextField" =>__( "Text Input",'wp-custom-fields-search'), "DropDownField" =>__( "Drop Down",'wp-custom-fields-search'), "RadioButtonField" =>__( "Radio Button",'wp-custom-fields-search'), "HiddenField" =>__( "Hidden Constant",'wp-custom-fields-search'), ), "comparison"=>array( "EqualComparison" =>__( "Equals",'wp-custom-fields-search'), "LikeComparison" =>__( "Phrase In",'wp-custom-fields-search'), "WordsLikeComparison" =>__( "Words In",'wp-custom-fields-search'), "LessThanComparison" =>__( "Less Than",'wp-custom-fields-search'), "MoreThanComparison" =>__( "More Than",'wp-custom-fields-search'), "AtMostComparison" =>__( "At Most",'wp-custom-fields-search'), "AtLeastComparison" =>__( "At Least",'wp-custom-fields-search'), "RangeComparison" =>__( "Range",'wp-custom-fields-search'), //TODO: Make this work... // "NotEqualComparison" =>__( "Not Equal To",'wp-custom-fields-search'), ) ); $CustomSearchFieldStatic['Types'] = apply_filters('custom_search_get_classes',$CustomSearchFieldStatic['Types']); } return $CustomSearchFieldStatic['Types'][$type]; } function plugin_menu(){ add_options_page('Form Presets','WP Custom Fields Search',8,__FILE__,array(&$this,'presets_form')); } function getPresets(){ $presets = array(); foreach(array_keys($config = $this->getConfig()) as $key){ if(strpos($key,'preset-')===0) { $presets[$key] = $key; if($name = $config[$key]['name']) $presets[$key]=$name; } } return $presets; } function presets_form(){ $presets=$this->getPresets(); if(!$preset = $_REQUEST['selected-preset']){ $preset = 'preset-default'; } if(!$presets[$preset]){ $defaults = $this->getDefaultConfig(); $options = $this->getConfig(); $options[$preset] = $defaults; if($n = $_POST[$this->id][$preset]['name']) $options[$preset]['name'] = $n; elseif($preset=='preset-default') $options[$preset]['name'] = 'Default'; else{ list($junk,$id) = explode("-",$preset); $options[$preset]['name'] = 'New Preset '.$id; } update_option($this->id,$options); $presets[$preset] = $options[$preset]['name']; } if($_POST['delete']){ check_admin_referer($this->id.'-editpreset-'.$preset); $options = $this->getConfig(); unset($options[$preset]); unset($presets[$preset]); update_option($this->id,$options); list($preset,$name) = each($presets); } $index = 1; while($presets["preset-$index"]) $index++; $presets["preset-$index"] = __('New Preset','wp-custom-fields-search'); $linkBase = $_SERVER['REQUEST_URI']; $linkBase = preg_replace("/&?selected-preset=[^&]*(&|$)/",'',$linkBase); foreach($presets as $key=>$name){ $config = $this->getConfig($key); if($config && $config['name']) $name=$config['name']; if(($n = $_POST[$this->id][$key]['name'])&&(!$_POST['delete'])) $name = $n; $presets[$key]=$name; } $plugin=&$this; ob_start(); wp_nonce_field($this->id.'-editpreset-'.$preset); $hidden = ob_get_contents(); $hidden.="<input type='hidden' name='selected-preset' value='$preset'>"; $shouldSave = $_POST['selected-preset'] && !$_POST['delete'] && check_admin_referer($this->id.'-editpreset-'.$preset); ob_end_clean(); include(dirname(__FILE__).'/templates/options.php'); } function process_tag($content){ $regex = '/\[\s*wp-custom-fields-search\s+(?:([^\]=]+(?:\s+.*)?))?\]/'; return preg_replace_callback($regex, array(&$this, 'generate_from_tag'), $content); } function process_shortcode($atts,$content){ return $this->generate_from_tag(array("",$atts['preset'])); } function generate_from_tag($reMatches){ global $CustomSearchFieldStatic; ob_start(); $preset=$reMatches[1]; if(!$preset) $preset = 'default'; wp_custom_fields_search($preset); $form = ob_get_contents(); ob_end_clean(); return $form; } } global $CustomSearchFieldStatic; $CustomSearchFieldStatic['Inputs'] = array(); $CustomSearchFieldStatic['Types'] = array(); class AdminDropDown extends DropDownField { function AdminDropDown($name,$value,$options,$params=array()){ AdminDropDown::__construct($name,$value,$options,$params); } function __construct($name,$value,$options,$params=array()){ $params['options'] = $options; $params['id'] = $params['name']; parent::__construct($params); $this->name = $name; $this->value = $value; } function getHTMLName(){ return $this->name; } function getValue(){ return $this->value; } function getInput(){ return parent::getInput($this->name,null); } } if (!function_exists('json_encode')) { function json_encode($a=false) { if (is_null($a)) return 'null'; if ($a === false) return 'false'; if ($a === true) return 'true'; if (is_scalar($a)) { if (is_float($a)) { // Always use "." for floats. return floatval(str_replace(",", ".", strval($a))); } if (is_string($a)) { static $jsonReplaces = array(array("\\", "/", "\n", "\t", "\r", "\b", "\f", '"'), array('\\\\', '\\/', '\\n', '\\t', '\\r', '\\b', '\\f', '\"')); return '"' . str_replace($jsonReplaces[0], $jsonReplaces[1], $a) . '"'; } else return $a; } $isList = true; for ($i = 0, reset($a); $i < count($a); $i++, next($a)) { if (key($a) !== $i) { $isList = false; break; } } $result = array(); if ($isList) { foreach ($a as $v) $result[] = json_encode($v); return '[' . join(',', $result) . ']'; } else { foreach ($a as $k => $v) $result[] = json_encode($k).':'.json_encode($v); return '{' . join(',', $result) . '}'; } } } function wp_custom_fields_search($presetName='default'){ global $CustomSearchFieldStatic; if(strpos($presetName,'preset-')!==0) $presetName="preset-$presetName"; $CustomSearchFieldStatic['Object']->renderWidget(array('widget_id'=>$presetName,'noTitle'=>true),array('number'=>$presetName)); } function compat_method_exists($class,$method){ return method_exists($class,$method) || in_array(strtolower($method),get_class_methods($class)); }

    Read the article

< Previous Page | 404 405 406 407 408 409 410 411 412 413 414 415  | Next Page >