Search Results

Search found 8552 results on 343 pages for '14 04 1'.

Page 41/343 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • losetup does not decrypt device in Ubuntu 11.4 as before

    - by Kay
    I had an external volume mounted using losetup for about two years. It was created using Ubuntu 9.4 and I used the same Ubuntu installation throughout all dist upgrades. Now as I bought a new laptop I set up a fresh Ubuntu 11.4 installation on it. Problem is: losetup -e twofish /dev/loop0 /dev/sdb2 does not decrypt the volume anymore. The data in /dev/loop0 contains apparently random data. I am sure I entered the correct password. I modprobe'd cryptoloop and twofish. My question is: Has Canonical done some obscure changes to losetup like adding a salt? Does losetup depend on configuration files I did not know about? How can I decrypt the volume on my now laptop?

    Read the article

  • Basic OpenVPN setup not working

    - by WalterJ89
    I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

    Read the article

  • ipv6 auto configuration not working in ubuntu natty

    - by allan ruin
    In win7, my computer can automatically get a IPV6 global address and use ipv6 network, but in ubuntu natty, I can't find out how to let stateless configuration work. My network is a university campus network,so I don't need tunnels. I think if one thingg can silently and successfully complished in windows it shouldn't be impossible in linux. I did can manually edit /etc/network/interfaces and use a static ipv6 address, and I can use ipv6 this way, but I just want to use auto-configuration. I found this post: How to disable autoconfiguration on IPv6 in Linux? and try sudo sysctl -w net.ipv6.conf.all.autoconf=1 sudo sysctl -w net.ipv6.conf.all.accept_ra=1 but no luck

    Read the article

  • Lighttpd not starting - no error

    - by Furism
    I recently installed Lighttpd on Ubuntu Server 10.04 x86_64 and created several websites. What I do is include /etc/lighttpd/vhost.d/*.conf and put a configuration file for each website in that directory. The problem I have is when I "service lighttpd start" I get the message that the service started, there is no error message: root@178-33-104-210:~# service lighttpd start Syntax OK * Starting web server lighttpd [ OK ] But then if I take a look at the services listening, Lighttpd is nowhere to be seen: root@178-33-104-210:~# netstat -tap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 localhost:mysql *:* LISTEN 829/mysqld tcp 0 0 *:ftp *:* LISTEN 737/vsftpd tcp 0 0 *:ssh *:* LISTEN 739/sshd tcp6 0 0 [::]:ssh [::]:* LISTEN 739/sshd So I'm looking at ways I could troubleshoot this. I checked in /var/log/lighttpd/error.log and there's nothing in it. Edit: Sorry, I indicated I use CentOS but it's actually Ubuntu Server (I usually use CentOS but had to go with Ubuntu for that one).

    Read the article

  • How to install rmagick on Ubuntu 10.04?

    - by Andrew
    Here's what I've done so far: sudo apt-get install imagemagick libmagickcore-dev This did not throw any errors, so I think that ImageMagick is installed fine. Then I tried installing the gem: sudo gem install rmagick This resulted in the following error: ERROR: Error installing rmagick: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for Ruby version >= 1.8.5... yes checking for gcc... yes checking for Magick-config... yes checking for ImageMagick version >= 6.4.9... yes checking for HDRI disabled version of ImageMagick... yes checking for stdint.h... yes checking for sys/types.h... yes checking for wand/MagickWand.h... no Can't install RMagick 2.13.1. Can't find MagickWand.h. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/rmagick-2.13.1 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/rmagick-2.13.1/ext/RMagick/gem_make.out What do I need to do to install rmagick on Ubuntu 10.04?

    Read the article

  • Emacs doesn't load gui.

    - by D Connors
    Hi, whenever I run emacs or emacs23 on terminal I just get the following output: ** (emacs:2620): CRITICAL **: menu_proxy_module_load: assertion `dbusproxy != NULL' failed And the gui doesn't load, and emacs' window never opens. The emacs process doesn't actually crash (the terminal stays busy, and I can see the emacs23 process running with ps -e). I've tried running it with the -D --debug-init arguments, but the same thing happens and the output is exactly the same. However, if I run emacs -nw it successfully runs emacs in terminal mode as if nothing were wrong. Strangely, this problem only started happening the second time I ran emacs today. The first time it worked perfectly fine. Since then, I've tried rebooting and I've tried purging the emacs installation, to no success. I haven't installed any new packages today, but I might have upgraded some, could that be the reason? Is there a way to find out which packages were installed/upgraded today? Thanks I'm running Ubuntu Lucid

    Read the article

  • How to automatically execute a shell script when logging into Ubuntu

    - by Mike Rowave
    How do I get a script to execute automatically when I log in? Not when the machine starts up, and not for all users, but only when I (or any specific user with the script) login via the GNOME UI. From reading elsewhere I thought it was .bash_profile in my home directory, but for me it has no effect. When I manually execute it in a terminal window by typing ~/.bash_profile it works, but it won't run automatically when I log in. I'm running Ubuntu 11.04. The file permission on my .bash_profile is -rwx------. No .bash_profile existed in my home directory before I created it today. I seem to remember older versions of Linux having a .profile file for each user, but that doesn't work either. How is it done? Do I need to configure something else to get the .bash_profile to work? Or does the per-user login script need to be in some other file?

    Read the article

  • enable/disable ntp service on ubuntu 12.04

    - by ntphelp
    Our application runs on Ubuntu 12.04 Precise. On this server, we have both ntpdate and ntp. How to enable and disable the NTP service on-demand? I tried # sudo update-rc.d -f ntp remove/default and # sudo update-rc.d ntp enable/disable commands, but when I reboot server the ntp service starts running! I suspect ntpdate is starting ntp service on reboot. I removed ntpdate package from one of my experimental server, then ntp didn't start on reboot after issuing: # update-rc.d ntp disable Is there a way to control this? or is there way to permanently disable ntpdate?

    Read the article

  • gcc sandboxing tool - AppArmor / CHROOT jail on Ubuntu 12.04

    - by StuR
    We have a Node application as the front end to a C++ sandboxing tool, which compiles code using gcc and outputs the result to the browser. e.g. exec("gcc -o /tmp/test /tmp/test.cpp", function (error, stdout, stderr) { if(!stderr) { execFile('/tmp/test', function(error, stdout, stderr) {}); } }); This works fine. However, as you can imagine this is a security nightmare if it were to be made public - so I was thinking of two options to protect my stack: 1) A CHROOT jail - but this in itself wouldn't be enough to prevent directory traversal / file access. 2) AppArmor ? So my question is really, how could I protect my stack from any nasties that could come from: A) Compiling unknown code using gcc B) Executing the compiled code

    Read the article

  • store image installation error in UEC

    - by selvakumar
    to my college final year project we planned to setup the private cloud on the two machines. I recently installed Ubuntu Enterprise Cloud (UEC) on two of my machines . I was trying to install the store image through WebUI. I was able to download Ubuntu 10.04 - (i386) image but while installing, it's giving me following error: - Command 'euca-upload-bundle' returned status code 1: Checking bucket: image-store-1296600766 Traceback (most recent call last): File "/usr/bin/euca-upload-bundle", line 231, in main() File "/usr/bin/euca-upload-bundle", line 214, in main bucket_instance = ensure_bucket(conn, bucket, canned_acl) File "/usr/bin/euca-upload-bundle", line 87, in ensure_bucket bucket_instance = connection.get_bucket(bucket) File "/usr/lib/pymodules/python2.6/boto/s3/connection.py", line 275, in get_bucket rs = bucket.get_all_keys(headers, maxkeys=0) File "/usr/lib/pymodules/python2.6/boto/s3/bucket.py", line 204, in get_all_keys headers=headers, query_args=s) File "/usr/lib/pymodules/python2.6/boto/s3/connection.py", line 342, in make_request data, host, auth_path, sender) File "/usr/lib/pymodules/python2.6/boto/connection.py", line 459, in make_request return self._mexe(method, path, data, headers, host, sender) File "/usr/lib/pymodules/python2.6/boto/connection.py", line 437, in _mexe raise e socket.error: [Errno 110] Connection timed out could anyone please help me?

    Read the article

  • Which group memberships are necessary for simple users in Ubuntu 12.04?

    - by Joey Carson
    I'm configuring Ubuntu 12.04 for my sister. I'd like to give her a system that she really can't screw up, but can still do normal things like install software. I don't want to just add her user to /etc/sudoers so that she can become root because she could possibly mess something up. I know that I should be able to get around this by just adding her to the necessary groups, but I'm not sure which ones those should be. Could anyone suggest them or point me in the direction of some kind of list that heavily used software in Ubuntu requires group membership?

    Read the article

  • Ubuntu purple splash screen with blinking pixels?

    - by joxnas
    I had ubuntu 9.10 I upgraded to 10.04 after solving some problems (freeze at boot). Since then, I don't have the ubuntu's logo showing up when I boot, but a purple screen with some blinking pixels. I didn't care much about it... but today my computer took too long at that screen (normally it was just 1/4 second, but today it was like a minute..). And it happened like 4 or 5 times in a row (Only at the 5th time I realised that it was not freezing up, but it simply would took more time) After a reboot, it is again 1/4 second of purple screen but I don't want this problem to return.. so I want to get rid of the purple screen (I think it is an indicator of the problem) Well, I already installed the graphic drivers (going to system admnistration hardware drivers). But it didn't solve anything. (I don't know if it is even related) I searched in google, found something old (2006) and I think it maybe has some relation with my problems .. http://ubuntuforums.org/archive/index.php/t-294692.html But couldn't understand the conversation (i'm a linux novice) Sorry for my horrible english.. I would appreciate any help! My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core 2 Duo

    Read the article

  • How can I control which sound card Ubuntu uses for playback?

    - by GorillaSandwich
    I am dual-booting Ubuntu 9.04 and Windows XP but am new to Ubuntu. In Windows, I use an M-Audio Audiophile 2496 sound card for recording (because it has RCA input jacks for my mixer), but I don't use it for playback (because my speakers use a 1/8 inch jack); instead, I use the motherboard's built-in sound card. I tried to recreate this arrangement in Ubuntu, but despite selecting the built-in card for all playback under System > Preferences > Sound, I still have inconsistent results. Rhythmbox plays back through the integrated card, but Flash content in the browser and games in the OS send their audio to the Audiophile card. I have seen recommendations to use a program called "Jack" to control this, but I installed it and found it baffling. How can I control which card is used for playback, other than disabling one card (as I discovered how to do and explain below)? Also, is there a GUI for disabling hardware, or is it necessary to edit a configuration file?

    Read the article

  • installing jdk1.7.0 on Ubuntu 11.04 machine

    - by Yogesh
    I am facing a problem while trying to install Java 7 on Ubuntu. The following are the steps that I performed for installing: I installed the setup file from the link given below: wget http://download.oracle.com/otn-pub/java/jdk/7u1-b08/jdk-7u1-linux-x64.tar.gz I have a file: jdk-7u1-linux-x64.tar.gz I Untared it: tar -xvf jdk-7u1-linux-x64.tar.gz sudo mv ./jdk1.7.0_01 /usr/lib/jvm/jdk1.7.0_01 sudo update-alternatives –config java Here it gave me the following output: There is only one alternative in link group java: /usr/lib/jvm/java-6-sun/jre/bin/java Nothing to configure. sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jdk1.7.0_01/jre/bin/java 1(I entered 1 here.) sudo update-alternatives --config java java -version. It showed the following output java version "1.6.0_26" Java(TM) SE Runtime Environment (build 1.6.0_26-b03) Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode) I am not sure if jdk1.7.0 is installed as its showing the version as 1.6.0_26.

    Read the article

  • Virtualbox Ubuntu 10.04 on Windows 7: networking won't work

    - by Herbert Roitblat
    I have a virtualbox image that I created using libvirt from Ubuntu 10.04. It assigns a fixed IP address. I can start it up on my Windows 7 VirtualBox, but I cannot get networking to work. My colleague loaded the same image onto his Windows 7 and networking worked as a bridged connection. Therefore, I know that the image is good, it must be something about my Windows 7 installation. Any thoughts on where to look to get networking running in my virtual machine? Thanks, Herb

    Read the article

  • Change the order of IP addresses returned by ifconfig?

    - by erikcw
    I have an Ubuntu server with several IP addresses attached to it. 127.0.0.1 is listed as venet0 by ifconfig. I'm using Chef to configure the server. The problem is that chef is listing 127.0.0.1 as the IP address for the server instead of one of the server's "real" IPs. (apparent "ohai ipaddress" uses the first IP listed by ifconfig to determine the server's IP). How can I change the order so the servers main IP is listed first instead of the 127.0.0.1? Can venet0 be deleted and venet0:0 be "promoted" to take its place since 127.0.0.1 is already listed in the "lo" interface? lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16700 (16.7 KB) TX bytes:16700 (16.7 KB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:7622207 errors:0 dropped:0 overruns:0 frame:0 TX packets:8183436 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2102750761 (2.1 GB) TX bytes:2795213667 (2.7 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX1 P-t-P:XXX.XXX.XXX.XX1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX2 P-t-P:XXX.XXX.XXX.XX2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 route -n route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 venet0 0.0.0.0 192.0.2.1 0.0.0.0 UG 0 0 0 venet0

    Read the article

  • trouble shooting ntfs-loop-xen combination in wubi based grub of Ubuntu

    - by Registered User
    Here is a situation I installed Ubuntu on a laptop using Wubi in Windows 7 drive.*The laptop is not mine.*I have installed and things worked by now perfectly without any problem.We are trying to set up a Xen (virtualization)environment in this laptop. After setting up every thing cleanly.When I needed to boot with following grub entries menuentry "Xen Linux 2.6.32.27" { insmod ntfs set root='(hd0,2)' loopback loop0 /ubuntu/disks/root.disk set root=(loop0) multiboot /boot/xen.gz module /boot/vmlinuz-2.6.32.27 dummy=dummy root=/dev/sda2 loop=/ubuntu/disks/root.disk ro console=tty0 module /boot/initrd.img-2.6.32.27 } I got error file not found error unknown command 'multiboot' error unknown command 'module' error unknown command 'module' Now to dig this issue further I reboot the machine and go to grub command prompt and manually pass on each of the above parameters which you see in the grub entry when I reached grub> insmod multiboot then I got following message on screen error:file not found. It looks like this wubi+ grub setup has just enough modules to use loopback file on ntfs, but the ACTUAL /boot directory is on the loopback NOT ntfs (hd0,2). Therefore any attempt to read any files from (hd0,2) simply wont work, cause there's no file there.I need to use insmod multiboot and command multiboot and module which are available in grub on a normal install without Wubi.But since the laptop is not mine so I am not allowed to partition it and have to make it work in this situation only. While a normal Kernel is still booting? How can I get module multiboot in this Wubi based install.

    Read the article

  • Ext4 Input/Output Error Reboot via SSH

    - by LorenVS
    I've got a remote appliance, and its disk IO seems to have locked up, trying to run anything that isn't already loaded results in errors like this: $ sudo shutdown -r 0 sudo: Can't open /var/lib/sudo/<machine_name>/0: Read-only file system sudo: unable to execute /sbin/shutdown: Input/output error I have SSH access to the appliance. I'm hoping that restarting the box will fix this (if not I have to go replace the box), but trying to restart it yields the above output. Anyone have any ideas???

    Read the article

  • Permission forbidden on localhost with apache2

    - by N Alex
    Here is what I am trying to do. I tried to add another folder to apache and I get the following error when trying to acces testing/index.html. The idea is that I would like to have for every customer a folder like /home/neagoe/Work/InterWebs/Projects/[PROJECT NAME]/CustomerProjects/website/dist. Forbidden You don't have permission to access /index.html on this server. Apache/2.2.22 (Ubuntu) Server at testing Port 80 Here are the steps that I followed: Step1: sudo chmod a+x /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step2: sudo chown -R www-data:www-data /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist sudo chmod -R 775 /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step3: sudo adduser $USER www-data Step4: sudo a2enmod userdir Step5: sudo cp /etc/apache/sites-available/default /etc/apache/sites-available/testing I edited the file /etc/apache/sites-available/testing so it looks like this: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName testing DocumentRoot /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Step6: I edited hosts ("/etc/hosts") so it looks like this: 127.0.0.1 localhost 127.0.0.1 testing # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters Step7: sudo a2ensite testing sudo service apache2 restart I searched for about 2 hours on the internet but I can't figure out what went wrong. All the pages that I found following the same steps as described above. I know there are similar questions here on the internet, but the answer is to change permission to the directory which I did on Step2. I am sorry if this is really a duplicate but I could't find the right answer. Thank you! PS. I asked this also on AskUbuntu but didn't get any answers so I'm trying my luck here. Edit: There isn't much on the error log or the access log. On the access.log: ::1 - - [10/Aug/2013:11:23:28 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:29 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:31 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:32 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:33 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:34 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:35 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:23:23 +0300] "POST /wordpress-testing/wp-cron.php?doing_wp_cron=1376123003.7026669979095458984375 HTTP/1.0" 200 705 "-" "WordPress/3.6; http://localhost/wordpress-testing" ::1 - - [10/Aug/2013:11:23:36 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:37 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:38 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:31:32 +0300] "GET /index.html HTTP/1.1" 200 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:23.0) Gecko/20100101 Firefox/23.0" And the last line repeats for about 200 rows. On the error.log: 1. This lines repeat from time to time. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525 /msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:06:42 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations [Sat Aug 10 13:07:36 2013] [notice] caught SIGTERM, shutting down PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:07:37 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations 2. And this is the predominant error. (hundreds of lines) [Sat Aug 10 13:07:40 2013] [error] [client 127.0.0.1] (13)Permission denied: access to /index.html denied

    Read the article

  • Ubuntu server loses exactly 5 minutes once in a while

    - by Harold Smith
    I noticed that my server, an Ubuntu server 12.04, was losing time. I figured the hardware clock was off or maybe dying due to a faulty CMOS battery. I installed NTP to ensure the drift would be corrected, but to no avail. During a day it would lose 20 minutes or so. To debug, I created a small cron job to check against a remote servers time, which I knew to be correct. The script calculates the difference in seconds between local and remote time. The result was interesting. It seems to be losing exactly 5 minutes several times during the day. Look at this log (difference from remote server noted in seconds): Tue Oct 23 03:30:02 CEST 2012: 284 Tue Oct 23 03:35:02 CEST 2012: 284 Tue Oct 23 03:40:01 CEST 2012: 285 Tue Oct 23 03:45:02 CEST 2012: 285 Tue Oct 23 03:50:02 CEST 2012: 285 Tue Oct 23 03:55:02 CEST 2012: 284 Tue Oct 23 04:00:02 CEST 2012: 284 Tue Oct 23 04:05:01 CEST 2012: 285 Tue Oct 23 04:10:01 CEST 2012: 285 Tue Oct 23 04:15:02 CEST 2012: 585 Tue Oct 23 04:20:02 CEST 2012: 584 Tue Oct 23 04:25:02 CEST 2012: 584 Tue Oct 23 04:30:02 CEST 2012: 584 Tue Oct 23 04:35:01 CEST 2012: 585 Tue Oct 23 04:40:01 CEST 2012: 585 Tue Oct 23 04:45:02 CEST 2012: 585 Tue Oct 23 04:50:02 CEST 2012: 584 Tue Oct 23 04:55:02 CEST 2012: 584 Tue Oct 23 05:00:02 CEST 2012: 584 Tue Oct 23 05:05:01 CEST 2012: 585 Tue Oct 23 05:10:01 CEST 2012: 585 Tue Oct 23 05:15:02 CEST 2012: 585 Tue Oct 23 05:20:02 CEST 2012: 584 Tue Oct 23 05:25:02 CEST 2012: 584 Tue Oct 23 05:30:02 CEST 2012: 584 Tue Oct 23 05:35:01 CEST 2012: 585 Tue Oct 23 05:40:01 CEST 2012: 585 Tue Oct 23 05:45:02 CEST 2012: 584 Tue Oct 23 05:50:02 CEST 2012: 584 Tue Oct 23 05:55:02 CEST 2012: 584 Tue Oct 23 06:00:02 CEST 2012: 584 Tue Oct 23 06:05:03 CEST 2012: 584 Tue Oct 23 06:10:02 CEST 2012: 584 Tue Oct 23 06:15:01 CEST 2012: 585 Tue Oct 23 06:20:02 CEST 2012: 584 Tue Oct 23 06:25:02 CEST 2012: 584 Tue Oct 23 06:30:02 CEST 2012: 584 Tue Oct 23 06:35:02 CEST 2012: 584 Tue Oct 23 06:40:02 CEST 2012: 584 Tue Oct 23 06:45:01 CEST 2012: 585 Tue Oct 23 06:50:02 CEST 2012: 584 Tue Oct 23 06:55:01 CEST 2012: 585 Tue Oct 23 07:00:02 CEST 2012: 584 Tue Oct 23 07:05:02 CEST 2012: 584 Tue Oct 23 07:10:02 CEST 2012: 584 Tue Oct 23 07:15:02 CEST 2012: 584 Tue Oct 23 07:20:02 CEST 2012: 584 Tue Oct 23 07:25:02 CEST 2012: 584 Tue Oct 23 07:30:01 CEST 2012: 585 Tue Oct 23 07:35:02 CEST 2012: 584 Tue Oct 23 07:40:02 CEST 2012: 584 Tue Oct 23 07:45:02 CEST 2012: 584 Tue Oct 23 07:50:02 CEST 2012: 584 Tue Oct 23 07:55:02 CEST 2012: 584 Tue Oct 23 08:00:01 CEST 2012: 585 Tue Oct 23 08:05:02 CEST 2012: 584 Tue Oct 23 08:10:02 CEST 2012: 584 Tue Oct 23 08:15:02 CEST 2012: 584 Tue Oct 23 08:20:02 CEST 2012: 584 Tue Oct 23 08:25:02 CEST 2012: 584 Tue Oct 23 08:30:01 CEST 2012: 585 Tue Oct 23 08:35:02 CEST 2012: 584 Tue Oct 23 08:40:02 CEST 2012: 584 Tue Oct 23 08:45:02 CEST 2012: 584 Tue Oct 23 08:50:02 CEST 2012: 584 Tue Oct 23 08:55:02 CEST 2012: 584 Tue Oct 23 09:00:02 CEST 2012: 584 Tue Oct 23 09:05:03 CEST 2012: 584 Tue Oct 23 09:10:02 CEST 2012: 584 Tue Oct 23 09:15:02 CEST 2012: 584 Tue Oct 23 09:20:02 CEST 2012: 584 Tue Oct 23 09:25:02 CEST 2012: 584 Tue Oct 23 09:30:01 CEST 2012: 584 Tue Oct 23 09:35:02 CEST 2012: 584 Tue Oct 23 09:40:02 CEST 2012: 584 Tue Oct 23 09:45:02 CEST 2012: 584 Tue Oct 23 09:50:02 CEST 2012: 584 Tue Oct 23 09:55:02 CEST 2012: 584 Tue Oct 23 10:00:01 CEST 2012: 584 Tue Oct 23 10:05:02 CEST 2012: 584 Tue Oct 23 10:10:07 CEST 2012: 584 Tue Oct 23 10:15:02 CEST 2012: 584 Tue Oct 23 10:20:02 CEST 2012: 884 Tue Oct 23 10:25:02 CEST 2012: 884 Tue Oct 23 10:30:02 CEST 2012: 883 Tue Oct 23 10:35:01 CEST 2012: 884 Tue Oct 23 10:40:02 CEST 2012: 884 Tue Oct 23 10:45:02 CEST 2012: 884 Tue Oct 23 10:50:02 CEST 2012: 884 Tue Oct 23 10:55:02 CEST 2012: 1184 Tue Oct 23 11:00:02 CEST 2012: 1183 Tue Oct 23 11:05:01 CEST 2012: 1184 Tue Oct 23 11:10:02 CEST 2012: 1184 Tue Oct 23 11:15:02 CEST 2012: 1184 Tue Oct 23 11:20:02 CEST 2012: 1184 This does not seem to be faulty CMOS battery in my opinion. But what do you think?

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >