Search Results

Search found 8552 results on 343 pages for '14 04 1'.

Page 43/343 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • Increasing the screen resolution in Ubuntu 10.04

    - by Veera
    I'm running Ubuntu 10.04 edition on my Acer 5738Z laptop. The screen size of my laptop is about 15'' but the screen resolution in Ubuntu is stuck at 1366x768. I know that my monitor could give better resolution, because previously I was running Win XP and I was able to set higher resolution there. So, my questions here: How do I increase my screen resolution, here? As per the answer given to a related question, I tried to edit the xorg.conf file, but I couldn't find the file in the place /etc/x11/. Should I create this file? If I have to install screen drivers separately, where could I find it?

    Read the article

  • How to use public-key ssh authentication

    - by Poma
    I have 2 ubuntu 12.04 (beta) servers (node1 and node2) and want to establish passwordless root access between them. Other users should not have access to other boxes. Also note that ssh default port is changed to 220. Here's what I did: sudo -i cd /root/.ssh ssh-keygen -t rsa # with default name and empty password cat id_rsa.pub > authorized_keys then copied id_rsa & id_rsa.pub to node2 and added id_rsa.pub to authorized_keys. Both hosts have the same /root/.ssh/config file: Host node1 Hostname 1.2.3.4 Port 220 IdentityFile /root/.ssh/id_rsa Host node2 Hostname 5.6.7.8 Port 220 IdentityFile /root/.ssh/id_rsa Now the problem is that when I type ssh node2 it asks me for password. What may be the problem?

    Read the article

  • Ubuntu purple splash screen with blinking pixels?

    - by joxnas
    I had ubuntu 9.10 I upgraded to 10.04 after solving some problems (freeze at boot). Since then, I don't have the ubuntu's logo showing up when I boot, but a purple screen with some blinking pixels. I didn't care much about it... but today my computer took too long at that screen (normally it was just 1/4 second, but today it was like a minute..). And it happened like 4 or 5 times in a row (Only at the 5th time I realised that it was not freezing up, but it simply would took more time) After a reboot, it is again 1/4 second of purple screen but I don't want this problem to return.. so I want to get rid of the purple screen (I think it is an indicator of the problem) Well, I already installed the graphic drivers (going to system admnistration hardware drivers). But it didn't solve anything. (I don't know if it is even related) I searched in google, found something old (2006) and I think it maybe has some relation with my problems .. http://ubuntuforums.org/archive/index.php/t-294692.html But couldn't understand the conversation (i'm a linux novice) Sorry for my horrible english.. I would appreciate any help! My hardware: ATI Mobility Radeon 4650 HD P7450 2.13Ghz Core 2 Duo

    Read the article

  • Open a screen session inside a certain user on boot Ubuntu Server Linux

    - by Pez Cuckow
    I currently have a private server which I test my web apps on which runs Ubuntu Server 10.04 I also host a few game servers (rather than having wasted CPU time :-D) for some of my friends. These game servers I run in the game user account and each one has it's own screen session (so friends can ssh in and reboot the game server etc...). For example screen -R l4d2 runs ./start in the L4D2 folder. However if I reboot the server (which I have to do occasionally) all these sessions close and I have to manually create all the screen sessions and run the required games within them. Is there a way to set these screen sessions as Daemons or services or just boot on server start so they restart themselves on server reboot? I hope I have made my question easy to understand but feel free to ask questions! Many thanks,

    Read the article

  • Setting up vsftpd, hangs on list command

    - by Victor
    I installed vsftpd and configured it. When I try to connect to the ftp server using Transmit, it manages to connect but hangs on Listing "/" Then, I get a message stating: Could not retrieve file listing for “/”. Control connection timed out. Does it have anything to do with my iptables? My rules are as listed: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 30000 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

    Read the article

  • How to create a init.d script for openssh-server which was compiled and installed from source using configure + make + make install?

    - by Patrick L
    I have installed openssh-server in my Ubuntu PC using apt-get install openssh-server. The version is 5.9. Now, I would like to compile and install openssh-server version 6.2 from source codes. I have successfully downloaded the source codes, and run the following commands: ./configure make make install I found that the new version of openssh-server was installed into /usr/local/sbin/. The old version of openssh-server is in /usr/sbin/. I found that the service script in /etc/init.d/ssh is still pointing to /usr/sbin/. And the old openssh-server (v5.9) is still running. How can I replace the old openssh-server with the new openssh-server that I have just compiled and installed? How can I create a init.d script to start and stop the new openssh-server that I've compiled from source manually? How to start the new openssh-server on boot? When I install openssh-server using apt-get install, the config files will be installed into /etc/ssh/. If I compile and install it from source, where is the config file? If I compiled openssh-server from source, but I install openssh-client package using apt-get install, will there be any config files conflict? Thanks.

    Read the article

  • Ubuntu server loses exactly 5 minutes once in a while

    - by Harold Smith
    I noticed that my server, an Ubuntu server 12.04, was losing time. I figured the hardware clock was off or maybe dying due to a faulty CMOS battery. I installed NTP to ensure the drift would be corrected, but to no avail. During a day it would lose 20 minutes or so. To debug, I created a small cron job to check against a remote servers time, which I knew to be correct. The script calculates the difference in seconds between local and remote time. The result was interesting. It seems to be losing exactly 5 minutes several times during the day. Look at this log (difference from remote server noted in seconds): Tue Oct 23 03:30:02 CEST 2012: 284 Tue Oct 23 03:35:02 CEST 2012: 284 Tue Oct 23 03:40:01 CEST 2012: 285 Tue Oct 23 03:45:02 CEST 2012: 285 Tue Oct 23 03:50:02 CEST 2012: 285 Tue Oct 23 03:55:02 CEST 2012: 284 Tue Oct 23 04:00:02 CEST 2012: 284 Tue Oct 23 04:05:01 CEST 2012: 285 Tue Oct 23 04:10:01 CEST 2012: 285 Tue Oct 23 04:15:02 CEST 2012: 585 Tue Oct 23 04:20:02 CEST 2012: 584 Tue Oct 23 04:25:02 CEST 2012: 584 Tue Oct 23 04:30:02 CEST 2012: 584 Tue Oct 23 04:35:01 CEST 2012: 585 Tue Oct 23 04:40:01 CEST 2012: 585 Tue Oct 23 04:45:02 CEST 2012: 585 Tue Oct 23 04:50:02 CEST 2012: 584 Tue Oct 23 04:55:02 CEST 2012: 584 Tue Oct 23 05:00:02 CEST 2012: 584 Tue Oct 23 05:05:01 CEST 2012: 585 Tue Oct 23 05:10:01 CEST 2012: 585 Tue Oct 23 05:15:02 CEST 2012: 585 Tue Oct 23 05:20:02 CEST 2012: 584 Tue Oct 23 05:25:02 CEST 2012: 584 Tue Oct 23 05:30:02 CEST 2012: 584 Tue Oct 23 05:35:01 CEST 2012: 585 Tue Oct 23 05:40:01 CEST 2012: 585 Tue Oct 23 05:45:02 CEST 2012: 584 Tue Oct 23 05:50:02 CEST 2012: 584 Tue Oct 23 05:55:02 CEST 2012: 584 Tue Oct 23 06:00:02 CEST 2012: 584 Tue Oct 23 06:05:03 CEST 2012: 584 Tue Oct 23 06:10:02 CEST 2012: 584 Tue Oct 23 06:15:01 CEST 2012: 585 Tue Oct 23 06:20:02 CEST 2012: 584 Tue Oct 23 06:25:02 CEST 2012: 584 Tue Oct 23 06:30:02 CEST 2012: 584 Tue Oct 23 06:35:02 CEST 2012: 584 Tue Oct 23 06:40:02 CEST 2012: 584 Tue Oct 23 06:45:01 CEST 2012: 585 Tue Oct 23 06:50:02 CEST 2012: 584 Tue Oct 23 06:55:01 CEST 2012: 585 Tue Oct 23 07:00:02 CEST 2012: 584 Tue Oct 23 07:05:02 CEST 2012: 584 Tue Oct 23 07:10:02 CEST 2012: 584 Tue Oct 23 07:15:02 CEST 2012: 584 Tue Oct 23 07:20:02 CEST 2012: 584 Tue Oct 23 07:25:02 CEST 2012: 584 Tue Oct 23 07:30:01 CEST 2012: 585 Tue Oct 23 07:35:02 CEST 2012: 584 Tue Oct 23 07:40:02 CEST 2012: 584 Tue Oct 23 07:45:02 CEST 2012: 584 Tue Oct 23 07:50:02 CEST 2012: 584 Tue Oct 23 07:55:02 CEST 2012: 584 Tue Oct 23 08:00:01 CEST 2012: 585 Tue Oct 23 08:05:02 CEST 2012: 584 Tue Oct 23 08:10:02 CEST 2012: 584 Tue Oct 23 08:15:02 CEST 2012: 584 Tue Oct 23 08:20:02 CEST 2012: 584 Tue Oct 23 08:25:02 CEST 2012: 584 Tue Oct 23 08:30:01 CEST 2012: 585 Tue Oct 23 08:35:02 CEST 2012: 584 Tue Oct 23 08:40:02 CEST 2012: 584 Tue Oct 23 08:45:02 CEST 2012: 584 Tue Oct 23 08:50:02 CEST 2012: 584 Tue Oct 23 08:55:02 CEST 2012: 584 Tue Oct 23 09:00:02 CEST 2012: 584 Tue Oct 23 09:05:03 CEST 2012: 584 Tue Oct 23 09:10:02 CEST 2012: 584 Tue Oct 23 09:15:02 CEST 2012: 584 Tue Oct 23 09:20:02 CEST 2012: 584 Tue Oct 23 09:25:02 CEST 2012: 584 Tue Oct 23 09:30:01 CEST 2012: 584 Tue Oct 23 09:35:02 CEST 2012: 584 Tue Oct 23 09:40:02 CEST 2012: 584 Tue Oct 23 09:45:02 CEST 2012: 584 Tue Oct 23 09:50:02 CEST 2012: 584 Tue Oct 23 09:55:02 CEST 2012: 584 Tue Oct 23 10:00:01 CEST 2012: 584 Tue Oct 23 10:05:02 CEST 2012: 584 Tue Oct 23 10:10:07 CEST 2012: 584 Tue Oct 23 10:15:02 CEST 2012: 584 Tue Oct 23 10:20:02 CEST 2012: 884 Tue Oct 23 10:25:02 CEST 2012: 884 Tue Oct 23 10:30:02 CEST 2012: 883 Tue Oct 23 10:35:01 CEST 2012: 884 Tue Oct 23 10:40:02 CEST 2012: 884 Tue Oct 23 10:45:02 CEST 2012: 884 Tue Oct 23 10:50:02 CEST 2012: 884 Tue Oct 23 10:55:02 CEST 2012: 1184 Tue Oct 23 11:00:02 CEST 2012: 1183 Tue Oct 23 11:05:01 CEST 2012: 1184 Tue Oct 23 11:10:02 CEST 2012: 1184 Tue Oct 23 11:15:02 CEST 2012: 1184 Tue Oct 23 11:20:02 CEST 2012: 1184 This does not seem to be faulty CMOS battery in my opinion. But what do you think?

    Read the article

  • Apache directory authorization bug (clicking cancel gives acces to partial content)

    - by s4uadmin
    I got a minor problem (as the site is not high priority) but still a very interesting one. I have an apache root domain wherein other sites live "/var/www/" And I have foo.example.com forwarding to "/var/www/foo-example" (wordpress site) The problem here is that when you go to foo.example.com you are prompted to enter credentials. If you hit cancel it gives you the access denied page. But when you go to the servers' direct IP (this gives you the default index page) and hit cancel when prompted for credentials it just keeps giving you the login screen, and after pressing cancel a few times more it gives (a perhaps cached) bare html part of the page. How do I prevent this from happening? Perhaps this is a bug... Even if I would block access to the root directory when going to the ip/foo-example it would still do this. And I want to keep all the directories within the www directory or at least all in the same. Thanks PS: here is my configuration: <VirtualHost *:80> DocumentRoot /var/www/wp-xxxxxxx/ ServerName beta.xxxxxxxxx.nl <Directory "/var/www/wp-xxxxxxxxx/"> Options +Indexes AuthName "xxxxxxxx Beta Site" AuthType Basic require valid-user Satisfy all AuthBasicProvider file AuthUserFile /var/www/wp-xxxxxxx/.htxxxxxxxxx order deny,allow allow from all </Directory> ServerAdmin [email protected] ServerAlias beta.xxxxxxx.nl </VirtualHost>

    Read the article

  • mailman not relaying email to external address

    - by gozzilli
    I have a setup of mailman with postfix on an ubuntu server 12.04. My problem is that mailing list emails are not forwarded to email addresses external to my institution. However the initial welcome email is received by everyone, internally and externally. in fact, a simple email from command line with mail is successfully sent to anyone after that, mailing list emails are only forwarded to internal addresses. the domain name I'm using for the server is not that of my institution who is hosting the server. Here is my main.cf: myorigin = sub.myinstitution.tld mynetworks = 127.0.0.0/8 xxx.xxx.xxx.xxx/16 # this is my institution ip range relayhost = smtp.myinstitution.tld inet_interfaces = loopback-only local_transport = error:local delivery is disabled virtual_alias_maps = hash:/etc/postfix/virtual smtpd_recipient_restrictions = permit_mynetworks myhostname = mywebsite.tld mydestination = $myhostname, localhost.$mydomain, localhost I also found these two links on serverfault and ubuntu forums, but neither of these solutions seem to do the trick for me. Any help would be much appreciated.

    Read the article

  • Cut (smart edit) .mts (AVCHD Progressive) files un Ubuntu Lucid

    - by pts
    I have a bunch of .mts files containing AVCHD Progressive video recorded by a Panasonic camera, and I need software on Ubuntu Lucid with which I can remove the boring parts, and concatenate the interesting parts, all this without reencoding the video stream. It's OK for me to cut at keyframe boundary. If Avidemux was able to open the files, it would take about 60 hours of work for me to cut the files. (At least that was it last time I tried with similar videos, but of a file format supported by Avidemux.) So I need a fast, powerful and stable video editor, because I don't want that 60 hours of work go up to 240 or even 480 hours just because the tool is too slow or unstable or has a terrible UI. I've tried Avidemux 2.5.5 and 2.5.6, but they crash trying to open such a file, even if I convert the file to .avi first using mencoder -oac copy -ovc copy. mplayer can play the files. I've tried Avidemux 2.6.0, which can open the file, but it cannot jump to the previous or next keyframe etc. (if I make it jump to the next keyframe, and then to the previous keyframe, it doesn't end up at the original keyframe, sometimes displays an error etc.). Also I'm not sure if Avidemux 2.6.x would let me save the result without reencoding. I've tried Kdenlive 0.7.7.1, but playback is very choppy, and it cannot play audio at all (complaining that SDL cannot find the device; but many other programs on the system can play audio). It would be a pain to work with. I've tried converting the .mts file to .mkv using ffmpeg -i input.mts -vcodec copy -sameq -acodec copy -f matroska output.mkv, but that caused too much visible distortions in the video in both mplayer and Avidemux. I've tried converting the .mts file with TsRemux.exe, but Avidemux 2.5.x still can't open that file. Is there another program to cut and concatenate the files? Is there a preprocessor which would create a file (without reencoding the video) on which Avidemux wouldn't crash?

    Read the article

  • customized xkb layouts not working (in KDE?) after upgrade from Ubuntu 9.10 to 10.04

    - by Alan
    I customised my keyboard layout in 9.10 by editing the appropriate /usr/share/X11/xkb/symbols/ file. After upgrading to 10.04 I noticed it had overwritten all my modifications, so I recovered the layout and overwrote the symbol file's base entry. Sadly KDE (and, presumably, the entire OS) seems to ignore the files altogether. The help files don't mention anything about modifying layouts anyway (and the layout switcher seems to be using setxkbmap, which uses the above path according to its man page), so I'm at a bit of a loss. Do I need to compile this into some other format somehow or how do I get it to work?

    Read the article

  • which drive do I mount

    - by Crash893
    I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

    Read the article

  • UCEProtect Level 3 - Emails land in SPAM

    - by preetam
    I am not sure how i can have remove the IP from UCEPROTECT Level 3. Or a way in which i can send emails without them landing into spam. The IP which i have used has only sent emails to the users which they have asked for and naturally not listed for spamming. But the Service provider is. Any suggestion?, as i don't see the institution for which the setup has been made would change the ISP at this stage. Thank You

    Read the article

  • How to tell if OpenGL is really working in Ubuntu 10.04

    - by Jonathan
    I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

    Read the article

  • Ubuntu 12.04 blank screen after login

    - by kgthenerd
    I just installed Ubuntu 12.04 LTS 64 bit on a machine, everything went well accordingly but after login it just gives me a blank screen. During startup after BIOS message it shows "Out of range" error and comes to login window after logon it's just a blank screen. even after somehow it comes to an empty desktop screen i dont see the Unity bar or anything like that (Can change wallpaper, and system setting though). And can't goto Console mode by pressing Ctrl+Alt+F1 - it returns "Out of range" error. System is new AMD Sempron with 2 Gigs of RAM has NVIDIA GeForce 6150SE-based graphic chipset. any ideas on this?

    Read the article

  • A simple way to redirect http://mysite.com to http://mysite.com/mylink with Apache?

    - by Bart Silverstrim
    Just starting to try to get the hang of how all the directives and options work under Apache. I'd like to do a redirect with my one site (only running one site on the server) so that when a request comes in to http://mysite.com the server automatically redirects them to a sub-url of http://mysite.com/mylink. I have tried putting redirects into the file located in /etc/apache2/sites-enabled to rewrite this, but then the top level domain URL complains it isn't redirecting properly. I think what I want is a browser redirect, and thought using RewriteEngine On RewriteRule ^/$ /mylink [L,R] would work, but putting it into an .htaccess file didn't work (it redirected but immediately gave a 500 internal server error.) Putting it into the file in /etc/apache2/sites-enabled gives a configuration error when trying to restart Apache. I know it's something simple...but what am I missing?

    Read the article

  • Dell PowerEdge R720 - Corrupted RAID

    - by BT643
    Apologies in advance for the lengthy question. We have a Dell PowerEdge R720 server with: 2 x 136GB SAS drives in RAID 1 for the OS (Ubuntu Server 12.04) 6 x 3TB SATA drives in RAID 5 for data A few days ago we were getting errors when trying to access files on the large RAID 5 partition. We rebooted the server and got a message about the raid controller has found a foriegn config. We've had this before, and just needed to use Dell's RAID configuration utility to import foreign config on the RAID. Last time this worked, but this time, it started doing a disk check then we got this: FSCK has returned the following: "/dev/sdb1 inode 364738 has a bad extended attribute block 7 /dev/sdb1 unexpected inconsistency run fsck manually (i.e without -a or -p options) MOUNTALL fsck /ourdatapartition [1019] terminated with status 4 MOUNTALL filesystem has errors /ourdatapartition errors where found while checking the disk drive for /ourdatapartition Press F to fix errors, I to Ignore or M for Manual Recovery" We pressed F to try and fix the errors, but it eventually errored with: Inode 275841084, i_blocks is 167080, should be 0. Fix? yes Inode 275841141 has an invalid extend node (blk 2206761006, lblk 0) Clear? yes Inode 275841141, i_blocks is 227872, should be 0. Fix? yes Inode 275842303 has an invalid extend node (blk 2206760975, lblk 0) Clear? yes .... Error storing directory block information (inode=275906766, block=0, num=2699516178): Memory allocation failed /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** e2fsck: aborted /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** mountall: fsck /ourdatapartition [1286] terminated with status 9 mountall: Unrecoverable fsck error: /ourdatapartition We noticed one of the drive lights was not lit at all, and thought this may have failed and be the problem. We replaced the drive with a spare, and tried "F" to repair it again, but we keep just getting the same error as above. In the RAID configuration utility, all drives show as "online" and "optimal". We do have this data on another replicated server, so we're not worried about "recovering" anything, we just want to get the system back online asap. The server has 64 or 32GB memory, can't remember off the top of my head, but either way, with a 14TB RAID, I think it may still not be enough. Thanks EDIT - I checked the memory usage while fsck was running as suggested and after 2 or 3 minutes, it looked like this, using up nearly all of our servers memory: When it failed after 5 minutes or so with the error in my post, the memory immediately freed up again:

    Read the article

  • I would like to edit the layout of my keyboard just a bit - what's the best way?

    - by Codemonkey
    I'm using an Apple keyboard which has some annoyances compared to other keyboards. Namely, the Alt_L and Super_L keys are swapped, and the bar and less keys are swapped ("|" and "<"). I've written an Xmodmap file to swap the keys back: keycode 49 = less greater less greater onehalf threequarters keycode 64 = Super_L NoSymbol Super_L keycode 94 = bar section bar section brokenbar paragraph keycode 108 = Super_R NoSymbol Super_R keycode 133 = Alt_L Meta_L Alt_L Meta_L keycode 134 = Alt_R Meta_R Alt_R Meta_R I did this by identifying the keys using xev and the default modmap xmodmap -pke and swapping the keycodes. xev now identifies all my keys as correct, which is awesome! I can also use the correct keys to type the bar and less than symbols. (I followed this answer on askubuntu: http://askubuntu.com/q/24916/52719) But it seems the change isn't very deep. For instance, the Super key is now broken in the Compiz Settings Manager. No shortcuts involving the Super key works (but the Alt key does). Also the settings dialog for Gnome Do doesn't heed the changes in xmodmap, and I can't open the Gnome Do window anymore if I use any of the remapped keys. So to summarize, everything broke. I would like a deeper way of telling Ubuntu (or any other Linux distro for that matter) which keys are which on the keyboard. Is there a way to edit the Keyboard Layout directly? I'm using the Norwegian Bokmål keyboard layout. Does it reside in a file somewhere I could edit? Any comments, previous experiences or relevant stray thoughts would be greatly appreciated - Thanks

    Read the article

  • How do I correct the kernel version loaded by Grub2 in Ubuntu 12.04

    - by Paul D'Ambra
    I have a linux vps running Ubuntu 12.04 and when I run uname-r it replies: paul@webforms:~$ uname -r 2.6.32.33-kvm-i386-20111128-dirty paul@webforms:~$ sudo grub-install -v grub-install (GRUB) 1.99-21ubuntu3.1 if I run update-grub I get: paul@webforms:~$ sudo update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic-pae Found initrd image: /boot/initrd.img-3.2.0-26-generic-pae Found linux image: /boot/vmlinuz-2.6.38-15-generic-pae Found initrd image: /boot/initrd.img-2.6.38-15-generic-pae done and then rebooting gives me the same dirty kernel I'm going round in circles and as a relative noob I'm sure I must be missing something obvious so over to the hive-mind!!

    Read the article

  • Migrate openldap users and groups

    - by user53864
    I have an OpenLDAP server running on one of my ubuntu 8.10 servers. I used command-line only for OpenLdap installation and some basic configurations, everything else I'll configure with the Webmin gui tool. I'm trying to migrate to ubuntu 10.04 and I was able to migrate all other servies, application and databases but not the ldap. I'm an ldap beginner: I have installed OpenLDAP server and client on ubuntu 10.04 server using the link and used the following command to export and import ldap users and groups To export from 8.10 server slapcat > ldap.ldif To import to 10.04 server Stop ldap and slapadd -l ldap.ldif and Start ldap Then I accessed Webmin and checked in Ldap users and groups and I could see all the users and groups of my old ldap server.Whenever I create an ldap user from the webmin(in 8.10 or 10.04) a unix user is also created with the home directory under /home. But the imported users in 10.04 from 8.10 are not present as a unix user(/etc/passwd). How could I make the ldap users available as a unix user, is there any perfect way to export and import?. I also wanted to check the ldap users from the terminal that if password is exported properly but I don't know how to access the ldap users which are not available as unix users. On 8.10, I just use su - ldapuser and it is not working in the 10.04 as unix users are not created for the exported ldap users. If every thing works fine then the CVS works as it is using ldap authentication. Anybody could help me?

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >