Search Results

Search found 1565 results on 63 pages for 'bus'.

Page 41/63 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Motherboard memory question

    - by JERiv
    I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

    Read the article

  • help building a PC that can image a dozen hard drives simultaneously

    - by Bigbio2002
    Not sure if this belongs on here or SuperUser, but here goes... I'm trying to figure out how to make a mass hard drive imaging PC out of COTS parts. A dedicated imaging device can do 10 drives at a time, but costs several thousand dollars. So far, I'm thinking to use several 3-port PCI-E Firewire cards, and use some kind of Firewire-to-IDE adapter to connect the drives themselves. The "software" would consist of scripting diskpart, or some other imaging utility. The problem is that I can't seem to find any sort of adapter. I could use standard external hard drive bays, but then I'd have a dozen power cables that I need to plug in. Ugly, messy, and inefficient. I picked Firewire over USB not only for better transfer speeds, but also because FW can deliver power over the bus (and could theoretically power a hard drive). Does anyone have any input on this?

    Read the article

  • Computer won't reboot without waiting for a while

    - by Benjamin
    I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

    Read the article

  • Apps not starting on Mac OS X Lion

    - by KPS
    I have a strange problem, some apps that I download do not launch. There are 2 scenarios The application starts but keeps bouncing, once I click the bouncing icon in the tray it disappears. The process also closes in activity monitor The application fails to start, how ever many times I launch it, it refuses. The process does not even show up in activity monitor What I have done so far to resolve: Repaired permissions Clear all cache/temp using CleanMyMac Used DiskWarrior via OS and not during boot Additional Info: Model Name: MacBook Pro Model Identifier: MacBookPro5,2 Processor Name: Intel Core 2 Duo Processor Speed: 2.8 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 6 MB Memory: 8 GB Bus Speed: 1.07 GHz Boot ROM Version: MBP52.008E.B05 SMC Version (system): 1.42f4

    Read the article

  • Need help upgrading MacBookPro3,1 RAM to 4GB.

    - by Fantomas
    My questions are: 1) Where to buy it and what to buy? I have heard that this RAM is generic enough and it does not have to come from Apple. 2) Can I reuse my existing stick(s)? Would I have a single 2GB module, or 2 x 1GB modules? 3) If I have 2GB already, is it a good idea to have one old stick and one new one? Which one is better placed at the top and which one at the bottom? Let me know what questions you have. My computer's info: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31.0070.B07 SMC Version (system): 1.16f11

    Read the article

  • Random Server shutdown? - CentOS

    - by Kevin Hammett
    My system was working fine, and then it just had a random restart. Anyone have any idea of the problem? The message log: Jul 6 22:56:34 909I7 shutdown[719711]: shutting down for system halt Jul 6 22:56:34 909I7 init: Switching to runlevel: 0 Jul 6 22:56:35 909I7 smartd[10743]: smartd received signal 15: Terminated Jul 6 22:56:35 909I7 smartd[10743]: smartd is exiting (exit status 0) Jul 6 22:56:42 909I7 hcid[8749]: Got disconnected from the system message bus Jul 6 22:56:42 909I7 auditd[8430]: The audit daemon is exiting. Jul 6 22:56:42 909I7 kernel: audit(1341640602.922:344412): audit_pid=0 old=8430 by auid$ Jul 6 22:56:43 909I7 pcscd: pcscdaemon.c:572:signal_trap() Preparing for suicide Jul 6 22:56:43 909I7 pcscd: hotplug_libusb.c:376:HPRescanUsbBus() Hotplug stopped Jul 6 22:56:44 909I7 pcscd: readerfactory.c:1379:RFCleanupReaders() entering cleaning f$ Jul 6 22:56:44 909I7 pcscd: pcscdaemon.c:532:at_exit() cleaning /var/run Jul 6 22:56:44 909I7 kernel: Kernel logging (proc) stopped. Jul 6 22:56:44 909I7 kernel: Kernel log daemon terminating. Jul 6 22:56:45 909I7 exiting on signal 15

    Read the article

  • Will this RAM work well in an iMac?

    - by sala_7
    I want to increase the RAM of my 2.4GHz Intel Core 2 Duo 24" iMac. I currently have 1GB of RAM DDR2 SDRAM 667 MHz. I really want to upgrade, but know nothing about RAM or hardware in general... These are the cards I found: http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=D4B6F603A5CA7304 Are these of quality or should I look at something else? Finally, I have 800MHz of Bus speed, couldn't I get faster RAM? Thanks for taking the time to read, and hoping you take the time to answer.

    Read the article

  • What hardware factors may be considered bottlenecks on a Hyper-V virtual server during load testing?

    - by sean
    Our organization is load testing our application using virtual servers via Hyper-V to see what the user load can be using fair equipment on a single box setup. The developer group questioned the validity of the tests given the normal use of the box by the other virtual machines. IT admins answered that it is an acceptable platform to load test on because it has its own CPUs, memory and disks allocated. Is their answer mostly correct? What hardware factors may be considered bottle necks given the other virtual machines when testing our application? For example, would bus speed be a concern or network IO? The application consists of a windows service written using the 4.0 .NET Framework and SQL Server 2008 R2.

    Read the article

  • Real RAM latency

    - by user32569
    Hi, very quick question. When I look for RAM timing, I got 2 different explanations on what is CAS latency. First states, its the time after command to read has been issued from CPU and data are send to data bus. Second says its time betwen column in memory layout has been activated. So, where is the truth? I mean, when I want to know total RAM latenci, in case 1, ot would be just CAS times one clock time. In second case, it would be CAS+other things like RAstoCAS and so times one clock time. Thanks.

    Read the article

  • Removing integrated video card drivers broke other hardware?

    - by jsnlxndrlv
    I just purchased and installed an XFX ATI Radeon HD 4650 video card. The installation instructions said to remove the old video card drivers before installing the new driver. I did both things, but now every time I start my computer, the Found New Hardware wizard pops up for the following three devices: PCI Device SM Bus Controller Other PCI Bridge Device Furthermore, my LAN port no longer functions. The cable's connected, and the light on the port comes on, but the computer can't find any servers when I attempt to connect with it. The modem and router are working, and obviously I'm able to use the other computer here to post this. What do I do to fix this?

    Read the article

  • How to use a D-Link usb network adapter on debian

    - by Barranka
    I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

    Read the article

  • Assembling a number-crunching computer [closed]

    - by tugrul büyükisik
    What is needed to make a GPU fully fed by CPU? Comparing their flops/s is enough? For example, if i could manage to make a very old(pentium-3) CPU with one of Nvidia-Fermi GPU, it would not be able to fed the gpu with data per sec. What is the criteria to fit CPU to GPU exactly when OpenCL or some similar work needed? Of course RAM and BUS will be chosen in a similar way but how exactly? Assume each GPU-core will calculate a sqrt and a division and an adding for 100 times for every itearation. Thanks.

    Read the article

  • SFTP not working, but SSH is

    - by Dan
    I've had a server running CentOS for a few months now. A few days ago, I stopped being able to connect to it over SFTP. I've tried from multiple computers, OSes, clients, and internet connections. I can SSH in just fine, though. For example, Nautilus gives me this: Error: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Please select another viewer and try again. I was under the impression that SFTP was just pure SSH, and if one worked, the other would, and vice-versa. Clearly that's not the case, though. What could I have done wrong?

    Read the article

  • USB webcam just works once and next time I've to reboot

    - by user30262
    I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb. The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again. Has anyone else noticed this behaviour? Is there some good solution to reset the camera without rebooting to make it work again?

    Read the article

  • How can I use target mode in Linux with USB?

    - by dash17291
    Kernel 3.5 introduces: This release includes a driver for using an IEEE-1394 connection as a SCSI transport. This enables to expose SCSI devices to other nodes on the Firewire bus, for example hard disk drives. It's a similar functionality to Firewire Target Disk Mode on many Apple computers. This release also adds a usb-gadget driver that does the same with USB. The driver supports two USB protocols are supported that is BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is advertised on alternative interface 0 (primary) and UAS is on alternative interface 1. Both protocols can work on USB 2.0 and USB 3.0. UAS utilizes the USB 3.0 feature called streams support. http://kernelnewbies.org/Linux_3.5 I have an Arch Linux with kernel 3.5.3-1 and wanna try out this feature.

    Read the article

  • What does it mean for a computer to be an "IBM Compatible PC"?

    - by Jon
    A couple questions about this: 1) Is this term even relevant any more? 2) Does this mean anything from a developer's stand point? It is not exactly clear to me if this is a BIOS, architecture, bus or a combination. A piece of software I'm working on expects to see a "Description" of the system and currently windows machines report "AT/AT Compatible". Having been tasked to port this to Mac, I really don't know what a proper "Description" would be - this will most likely be omitted but I was wondering if anyone could provide some insight on the modern usage of this term.

    Read the article

  • External disk not working with Mac OS X 10.5

    - by ctx2002
    Hi: My OS is 10.5.7. I have an external hard disk, formatted as Mac OS Extended (Journaled), connected to my Mac machine through USB cable. I have used it for a while, but now it is not working. Error showed in /var/log/system.log. USBF: 2521.384 AppleUSBEHCI[0xa515800]::Found a transaction which hasn't moved in 5 seconds on bus 0xfd, timing out! (Addr: 0, EP: 0) ..... ...... kernel[0]: USBF: 2588.616 [0xa6baa00] The IOUSBFamily was not able to enumerate a device. Luckily, in my work place there is a Mac with OS 10.4, so I had plugged the disk into the 10.4 machine and it worked!!! I did checked "System Profiler" on both machines (10.5, 10.4). Under usb section, for 10.5 it shows USBEHCI, under 10.4, it shows USBOHCI. I am not a expert on USB Device , can any one tell me why 10.5 cause the problem. it was worked under 10.5

    Read the article

  • Why my USB mouse get suspended after 3 seconds of inactivity?

    - by Vi.
    Mouse's bottom LED goes off after 3 seconds after connection and cursor movements and wheel stops. Pressing any button, reconnecting or resetting USB device resumes it for another 3 seconds (when resumed by pressing button, this event does no go to X). This happens when using any of USB ports. This mouse works well with other computer with Linux. It was working well before. Why can it happen? How to fix it? Update: It happens only if laptop is on battery. Answer: this is caused by powersaving done by laptop-mode-tools. To temporary turn off powersaving one can use for i in /sys/bus/usb/devices/*/power/control; do echo on > $i; done

    Read the article

  • Clarification of the difference between PCI memory addressing and I/O addressing?

    - by KevinM
    Could someone please clarify the difference between memory and I/O addresses on the PCI/PCIe bus? I understand that I/O addresses are 32-bit, limited to the range 0 to 4GB, and do not map onto system memory (RAM), and that memory addresses are either 32-bit or 64-bit. I get the impression that memory addressing must map onto available RAM, is this true? That if a PCI device wishes to transfer data to a memory address, that address must exist in actual system RAM (and is allocated during PCI configuration) and not virtual memory. So if a PCI device only needs to transfer a small amount of data at a time, where there is no advantage to putting it into RAM or using DMA, then I/O addressing is fine (e.g. a parallel port implemented on a PCI card). And why do I keep reading that PCI/PCIe I/O addressing is being deprecated in favour of memory addressing? Thanks!

    Read the article

  • nm-applet and nmcli don't work in arch

    - by user1780765
    I installed arch linux about two weeks ago. But I still can't use Network Manager. When I use nm-applet command, I get this error: https://gist.github.com/4129816 And when I use nmcli con command, I get this: https://gist.github.com/4129837 sudo doesn't help me neither. D-Bus look fine, I can use dbus-monitor. I installed gnome, but I still can't use NM. I 'm using openbox now. I have another problem too: what should do so I can use nm-connection-editor with non-root users?

    Read the article

  • Bluetooth RFCOMM / SDP connection to a RS232 adapter in android

    - by ThePosey
    Hello All, I am trying to use the Bluetooth Chat sample API app that google provides to connect to a bluetooth RS232 adapter hooked up to another device. Here is the app for reference: http://developer.android.com/resources/samples/BluetoothChat/index.html And here is the spec sheet for the RS232 connector just for reference: http://serialio.com/download/Docs/BlueSnap-guide-4.77_Commands.pdf Well the problem is that when I go to connect to the device with: mmSocket.connect(); (BluetoothSocket::connect()) I always get an IOException error thrown by the connect() method. When I do a toString on the exception I get "Service discovery failed". My question is mostly what are the cases that would cause an IOException to get thrown in the connect method? I know those are in the source somewhere but I don't know exactly how the java layer that you write apps in and the C/C++ layer that contains the actual stacks interface. I know that it uses the bluez bluetooth stack which is written in C/C++ but not sure how that ties into the java layer which is what I would think is throwing the exception. Any help on pointing me to where I can try to dissect this issue would be incredible. Also just to note I am able to pair with the RS232 adapter just fine but I am never able to actually connect. Here is the logcat output for more reference: I/ActivityManager( 1018): Displayed activity com.example.android.BluetoothChat/.DeviceListActivity: 326 ms (total 326 ms) E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) D/BluetoothChat( 1729): onActivityResult -1 D/BluetoothChatService( 1729): connect to: 00:06:66:03:0C:51 D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_CONNECTING E/BluetoothChat( 1729): + ON RESUME + I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_CONNECTING I/BluetoothChatService( 1729): BEGIN mConnectThread E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 I/BluetoothChatService( 1729): CONNECTION FAIL TOSTRING: java.io.IOException: Service discovery failed D/BluetoothChatService( 1729): setState() STATE_CONNECTING - STATE_LISTEN D/BluetoothChatService( 1729): start D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_LISTEN I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID I/NotificationService( 1018): enqueueToast pkg=com.example.android.BluetoothChat callback=android.app.ITransientNotification$Stub$Proxy@446327c8 duration=0 I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID The device I'm trying to connect to is the 00:06:66:03:0C:51 which I can scan for and apparently pair with just fine. The below is merged from a similar question which was successfully resolved by the selected answer here: How can one connect to an rfcomm device other than another phone in Android? The Android API provides examples of using listenUsingRfcommWithServiceRecord() to set up a socket and createRfcommSocketToServiceRecord() to connect to that socket. I'm trying to connect to an embedded device with a BlueSMiRF Gold chip. My working Python code (using the PyBluez library), which I'd like to port to Android, is as follows: sock = bluetooth.BluetoothSocket(proto=bluetooth.RFCOMM) sock.connect((device_addr, 1)) return sock.makefile() ...so the service to connect to is simply defined as channel 1, without any SDP lookup. As the only documented mechanism I see in the Android API does SDP lookup of a UUID, I'm slightly at a loss. Using "sdptool browse" from my Linux host comes up empty, so I surmise that the chip in question simply lacks SDP support.

    Read the article

  • Session Cookies and IE 8

    - by Matt Luongo
    I recently built a simple web-app deployed over Tomcat. The app uses pretty standard session based security where a user who has logged in is given a session. Sessions work fine in Firefox and Chrome, but require the use of jsessionid in the URL for IE (tested 7 & 8), set to medium privacy. In IE 8, I tried to override cookie handling, setting "Allow all 3rd party cookies" and "Allow all session cookies"- no dice. However, when I run Tomcat on my local machine, IE accepts the cookie, and sessions work just fine. And now, for the HTTP headers. From Chrome, a logged in user gets a session GET http://devl:8080/testing/ HTTP/1.1 Host: devl:8080 Connection: keep-alive User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1036 Safari/532.5 Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP/1.1 200 OK Server: Apache-Coyote/1.1 P3P: CP="NON CURa ADMa DEVa TAIa OUR BUS IND UNI COM NAV INT STA" Set-Cookie: JSESSIONID=9280023BCE2046F32B13C89130CBC397; Path=/testing Content-Type: text/html;charset=UTF-8 Content-Language: en-US Content-Length: 2450 Date: Fri, 26 Mar 2010 14:14:40 GMT GET http://devl:8080/testing/logout HTTP/1.1 Host: devl:8080 Connection: keep-alive User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1036 Safari/532.5 Referer: http://devl:8080/testing/ Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Cookie: JSESSIONID=9280023BCE2046F32B13C89130CBC397 ... From IE 8, with standard medium level security and privacy- GET http://devl:8080/testing/ HTTP/1.1 Accept: application/x-ms-application, image/jpeg, application/xaml+xml, image/gif, image/pjpeg, application/x-ms-xbap, */* Accept-Language: en-US User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC; Tablet PC 2.0) UA-CPU: AMD64 Accept-Encoding: gzip, deflate Host: devl:8080 Connection: Keep-Alive HTTP/1.1 200 OK Server: Apache-Coyote/1.1 P3P: CP="NON CURa ADMa DEVa TAIa OUR BUS IND UNI COM NAV INT STA" Set-Cookie: JSESSIONID=192999F922D6E9C868314452726764BA; Path=/testing Content-Type: text/html;charset=UTF-8 Content-Language: en-US Content-Length: 2450 Date: Fri, 26 Mar 2010 14:32:34 GMT GET http://devl:8080/testing/logout HTTP/1.1 Accept: application/x-ms-application, image/jpeg, application/xaml+xml, image/gif, image/pjpeg, application/x-ms-xbap, */* Referer: http://devl:8080/testing/;jsessionid=6371A83EFE39A46997544F9146AA5CEA Accept-Language: en-US User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC; Tablet PC 2.0) UA-CPU: AMD64 Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: devl:8080 ... I thought it might be P3P, but on adding a compact policy, nothing changes. This is the standard Tomcat session, so I'm really surprised I haven't been able to find other people with the same problem so far. Anyone have any ideas?

    Read the article

  • problem to genrate swf file.

    - by nemade-vipin
    hello friend I have created one flex Air application where I have created the one authentication actionscript class. and one mxml file.This complete application using webservice and google map API. but when I am building application it is not genrating the SWF file in bin-debug folder. that is changes not reflecting in our application. my code is:- Action script class is :- package src { import adobe.utils.XMLUI; import mx.rpc.events.FaultEvent; import mx.controls.Alert; import generated.webservices.*; import mx.collections.ArrayCollection; public class Authentication { [Bindable] private var childName:ArrayCollection; [Bindable] private var childId:ArrayCollection; private var photoFeed:ArrayCollection; private var arrayOfchild:Array; private var newEntry:GetSBTSMobileAuthentication; public function authentication():void { // Instantiate a new Entry object. user = new SBTSWebService(); if(user!=null) { user.addSBTSWebServiceFaultEventListener(handleFaults); user.addgetSBTSMobileAuthenticationEventListener(authenticationResult); newEntry = new GetSBTSMobileAuthentication(); if(newEntry!=null) { newEntry.mobile=mobileno.text; newEntry.password=password.text; user.getSBTSMobileAuthentication(newEntry); } } } public function handleFaults(event:FaultEvent):void { Alert.show("A fault occured contacting the server. Fault message is: " + event.fault.faultString); } public function authenticationResult(event:GetSBTSMobileAuthenticationResultEvent):void { if(event.result != null && event.result._return>0) { if(event.result._return > 0) { var UserId:int = event.result._return; loginform.enabled = false; //getChildList(UserId); viewstack2.selectedIndex=1; } else { Alert.show("Authentication fail"); } } } } } mxml file is :- import src.Authentication; var user:Authentication = new Authentication(); ]]> <mx:TabNavigator id="viewstack2" selectedIndex="0" creationPolicy="all" width="100%" height="100%"> <mx:Form label="Login Form" id="loginform"> <mx:FormItem label="Mobile NO:"> <mx:TextInput id="mobileno"/> </mx:FormItem> <mx:FormItem label="Password:"> <mx:TextInput displayAsPassword="true" id="password" /> </mx:FormItem> <mx:FormItem> <mx:Button label="Login" click="user.authentication()"/> </mx:FormItem> </mx:Form> <mx:Form label="Child List"> <mx:Label width="100%" color="blue" text="Select Child."/> </mx:Form> <mx:Form label="Child Information"> </mx:Form> <mx:Form label="Bus Location"> </mx:Form> <mx:Form label="Bus path"> </mx:Form> </mx:TabNavigator> </mx:Panel>

    Read the article

  • Podcast Show Notes: Evolving Enterprise Architecture

    - by Bob Rhubart
    The latest series of ArchBeat podcast programs grew out of another virtual meet-up, held on March 11. As with previous meet-ups, I sent out a general invitation to the roster of previous ArchBeat panelists to join me on Skype to talk about whatever topic comes up. For this event, Oracle ACE Directors Mike van Alst and Jordan Braunstein  showed up, along with Oracle product manager Jeff Davies.  The result was an impressive and wide-ranging discussion on the evolution of Enterprise Architecture, the role of technology in EA, the impact of social computing, and challenge of having three generations of IT people at work in the enterprise – each with different perspectives on technology. Mike, Jordan, and Jeff talked for more than an hour, and the conversation was so good that slicing and dicing it to meet the time constraints for these podcasts has been a challenge. The first two segments of the conversation are now available. Listen to Part 1 Listen to Part 2 Part 3 will go live next week, and an unprecedented fourth segment will follow. These guys have strong opinions, and while there is common ground, they don’t always agree. But isn’t that what a community is all about? I suspect that you’ll have questions and comments after listening, so I encourage you to reach out to Mike, Jordan, and Jeff  via the following links: Mike van Alst Blog | Twitter | LinkedIn | Business |Oracle Mix | Oracle ACE Profile Jordan Braunstein Blog | Twitter | LinkedIn | Business | Oracle Mix | Oracle ACE Profile Jeff Davies Homepage | Blog | LinkedIn | Oracle Mix (Also check out Jeff’s book: The Definitive Guide to SOA: Oracle Service Bus)   Coming Soon ArchBeat’s microphones were there for the panel discussions at the recent Oracle Technology Network Architect Days in Dallas and Anaheim. Excerpts from those conversations will be available soon. Stay tuned: RSS Technorati Tags: oracle,otn,enterprise architecture,podcast. arch2arch,archbeat del.icio.us Tags: oracle,otn,enterprise architecture,podcast. arch2arch,archbeat

    Read the article

  • Ubuntu 12.04 LTS Wireless Asus USB-N53 (rt3572sta) driver installation issue

    - by Jake Thompson
    My purchase of the Asus USB-N53 just came in today and I spent several hours Googling and researching drivers for this device. When I first plugged the device in it connected fine to my open system, WEP, DHCP configured access point. I opened Google Chrome and a few pages loaded, everything seemed fine. 30 seconds later... Boom! It disconnected and showed attempts to reconnect and asked for the WEP key and just showed a state of infinite connection time until it asked me for the password again. I'm using amd64 (64 bit Ubuntu desktop 12.04 LTS) The official driver can be found here although I had no luck with it. lsusb: Bus 003 Device 002: ID 0b05:179d ASUSTek Computer, Inc. uname -a Linux Jake 3.2.0-31-generic #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ----------------------------------------------------------------------------------Solved: I must of done something wrong when I originally installed the latest drivers from the chipset manufacturers website. I tried reinstalling and did modprobe rt3572sta and waited maybe 10 minutes??? and I connected then I rebooted and everything seems to be working so far. What I did do before hand is unplug the device and typed into the terminal (once for every source I attempted to install): cd '<directory of the driver source>' make uninstall make clean Then I went into the 2.5.0.0 directory and installed that with make make install Then I typed modprobe rt3572sta This was all in superuser. For those who don't know: sudo su

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >