Search Results

Search found 5930 results on 238 pages for 'dont panic'.

Page 41/238 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• ddwrt client brigde acces point lost

  - by llazzaro

  Ok I have an AP with ddwrt firm (i know its not the best, but continue reading!) AP is configured to work like a wifi "transparent" brigde, also it had a virtual wifi network card to expand radius of wifi signal in that same AP. The brigde is working, computers behind AP gets ips from main routers which shares internet....BUT! I cant access webgui of the bridge AP... Main problem : AP is lost, but its working as brigde. I cant find it in the network (it didnt have any ip!) so I cant change any configuration... First solution : Reset AP, but it cannot be done. Reset button dont works due to a bug in ddwrt micro firm that mi linksys WAP54g had installed (I really hate this firmware I like more openwrt that my main router has) Second Solution : arp -a from main router , from computers behind AP...It dont appears in the list. Any more ideas, the router at some level must be there, the brigde is working. I know its possible that the AP is with an ip like 192.168.100.2 , my subnect actually is 172.16.X.X. :) thanks!

  Read the article

• Failing RAM, or something else?

  - by Thanatos

  I have a IBM Thinkpad T43, currently running Windows XP. Programs were crashing, XP was blue-screen-of-deathing, (more than usual) - it was basically unusable, but I couldn't get any informative error out of XP. I booted Ubuntu off a thumbdrive, which made it to the desktop, but as soon as I started to try to do anything, X segfaulted, along with several other services, followed quickly by kernel warnings and a kernel panic. I'm currently running Memtest86+ on this machine, which is spitting out numerous errors. (16k over 3 passes, and counting) The failing areas are numerous, and look something like this: 0001055da4 - XX.X MB, etc. The addresses that fail seem to cluster around 0-20 MB, 250MB, and, more rarely, 750MB, 1000MB, and 1200MB. However, a lot (but not all) of the failing addresses that I've seen end in XXXXXXX?da4 where the ? is a 1 or a 5. The machine has two sticks of RAM, one 512MB, one 1024 MB, the 512MB mapped to the lower addresses, the 1024 MB stick following. Is this indeed RAM failure, or should I consider other things before purchasing more RAM?

  Read the article

• Is there a local yubnub.org replacement?

  - by Justin Keogh

  I use yubnub very often... every google search I do by just (in firefox) "ctrl-t" - (now in the url bar) "y g searchterms" [Enter] "y" in this case is a search keyword I added by right clicking in the yubnub.org command box it's really fast, and I just do it automatically now... but the problem is now I am stuck with whatever the yubnub command that I am so used to using does. I cant change it... for example, what if I dont want to use google... but I still want to use the "g" command to search? or say I want to use google's https search... ect... I suppose this would be kinda trivial to implement locally... but I would hate to re-invent the code if it's allready done and in use... ideas? Also a local yubnub.org replacement would save me the DNS lookup and traffic to yubnub.org. I dont expect to be able to import all commands from yubnub.org but that would be cool if possible.

  Read the article

• Backing up a Windos 7 partition from Macbook with no OS X

  - by mattcodes

  I have a 3 year macbook with Windows 7 installed as 40gb and OS X as 40gb (80gb HD). I want to remove OS X as Im at the limit of 40gb on Windows and I have not logged on to Mac OS X since installed Win7 (dont flame me). So I want to delete OS X partition and expand my win partition to 80gb BUT I still would like to be able to regularly (once a week/month) backup my Windows 7 partition - its took a while to setup everything up right - not just docs and programs - so when the hard drive dies I want to be able to restore the partition and boot away, (the daily volatile bits I can pull down from dropbox and project from soure control). With Mac OS X I could use Winclone - and this worked flawless last time the HD failed with XP but with the absence of OS X I will need something else. Im thinking can I use a Linux Live boot CD along with an external USB hard drive. Boot from CD and then dd? the partition to the USB? What linux distro live CD should I use? I say dd as if I know what am taking about (I dont) is this the best way to backup a partition (when it will be restored to same hardware as bootable) ? What command?

  Read the article

• Entire filesystem restore from rdiff-backup snapshot

  - by atmosx

  I'm trying to make a complete system restore from an rdiff-backup. The cli for backing was: rdiff-backup --exclude-special-files --exclude /tmp --exclude /mnt --exclude /proc --exclude /sys / /mnt/backup/ebox/ I created a new partition mounted the partition at /mnt/gentoo and did: rdiff-backup -r /mnt/vol2 /mnt/gentoo However when I try to chroot to this system (following gentoo's manual, which means mounting /dev/ and /proc) I get the following error: chroot: failed to run command/bin/bash': No such file or directory` All this takes place on a Parallels (virtual machine) Debian installation. Any ideas on how to proceed in order to fully restore the system? Best Regards ps. /mnt/gentoo/bin/bash works fine if I execute it. All files and permissions are in place rdiff-backup seems to work just fine. However the system cannot neither boot (exits with kernel panic - cannot find init) or be chrooted.

  Read the article

• Failing RAM, or something else? [closed]

  - by Thanatos

  I have a IBM Thinkpad T43, currently running Windows XP. Programs were crashing, XP was blue-screen-of-deathing, (more than usual) - it was basically unusable, but I couldn't get any informative error out of XP. I booted Ubuntu off a thumbdrive, which made it to the desktop, but as soon as I started to try to do anything, X segfaulted, along with several other services, followed quickly by kernel warnings and a kernel panic. I'm currently running Memtest86+ on this machine, which is spitting out numerous errors. (16k over 3 passes, and counting) The failing areas are numerous, and look something like this: 0001055da4 - XX.X MB, etc. The addresses that fail seem to cluster around 0-20 MB, 250MB, and, more rarely, 750MB, 1000MB, and 1200MB. However, a lot (but not all) of the failing addresses that I've seen end in XXXXXXX?da4 where the ? is a 1 or a 5. The machine has two sticks of RAM, one 512MB, one 1024 MB, the 512MB mapped to the lower addresses, the 1024 MB stick following. Is this indeed RAM failure, or should I consider other things before purchasing more RAM?

  Read the article

• How does Google geo location service work?

  - by heaosax

  I dont use google maps much, but I was using it today and I clicked the "Show my location" button for the first time, then firefox asked for permission and I clicked "share my location", google maps showed my location pretty accurate. But, how does this system really works? I mean how can google know where I live? I am connecting to the internet with a VPN, so my "public IP" is not from my country, but from sweden, also I use linux and I change the mac of my wireless device, but google still show my location. I know I can disable this feature setting firefox about:config geo.enabled to false, but I am curious about how google can know where I live even when I dont have a real mac address and my IP is not from my real country. Basically I'd like to know if this feature works only because of code that exists in chrome and firefox (which spies my system)? I am worried about anyone knowing where I live, I mean... where is my privacy? Part of the fun about the internet is remaining anonymous.

  Read the article

• How to verify TRIM/discard on encrypted swap?

  - by svarni

  I am using an encrypted swap partition via ecryptfs-setup-swap on my Ubuntu 13.04 computer using a SSD. I have manually set up trim for my ext4 root partition (simply by adding the "discard" option in /etc/fstab). I also manually ran fstrim on the root partition prior to booting and using dstat I saw that for a few seconds several GB/s of data have been written to the disk. That was presumably the effect of the trim command. These high writerates are reproducable by deleting huge files and have not occured before setting up trim, so I take them as evidence for working trim/discard. Manually enabling trim on my root partition has stopped the wearout of my precious new disk from 365 used reserved blocks (out of 6176 total) within three months down to 0 additional used reserved blocks within three additional months (data from SMART attributes). Because I want to minimize the wearout of my SSD I now would like to know whether my swap partition (which is encrypted using ecryptfs-setup-swap) also makes use of the trim/discard option. I tried sudo swapon -d -v /dev/mapper/cryptswap1 but did not receive particular information ("-v") about whether trim/discard ("-d") was applied. If unsupported, i would expect a message. Then I tried sudo dd if=/dev/sda6 count=1 BS=1M | xxd | less directly after booting and when no swapspace was used but I saw not only zeroes. I assume, when looking at freshly trimmed regions, the disk would send zeroes instead of reading random sectors (and according to some forums, (unencrypted) swap space is trimmed once upon boot). Long story short: Are there any ideas on how to test if trim is effectively used for my encrypted swap? And if not, any ideas on how to - at least manually, for once - trim the whole swap space? I wouldn't want to tinker with the partition itself, because I dont know if it needs to be reinitialized as (encrypted) swap - I dont want to be left with an unbootable system :)

  Read the article

• Firefox: Clear History Is SUPER EFFECTIVE?

  - by acidzombie24

  I'm seeing a performance problem on certain sites (like gmail) which clearing the history should not affect. Is this a website problem or a firefox problem and what can i do to fix it w/o clearing my history? Also as a webdeveloper i am interested in how to make this happen (or not happen). I'm using firefox 8 and i confirmed the problem by copying my profile to firefox 11 (portable). To reproduce go to gmail.com and sign in. Have your task manager open. Once you click signin or hit enter gmail will bring up your emails. Keep your eye on the CPU usage. I checked and right now on this machine its using all my CPU for 22seconds!!!! Yes. 22 seconds. Once i cleared my "browser & download history" Its <6seconds. WTF. I have no idea why or how the size of history and CPU usage when loading up gmail are correlated. I have firefox setup so it never clears the history. But... 22seconds is a disaster. Can someone explain why this is happening or a fix that isnt clearing my history? I tried visiting a few websites and only gmail eats up that much CPU. Most websites only take <5sec of max CPU. So maybe this is a gmail problem? Or a firefox problem that gmail happens to hit? I still dont understand why it happens. -edit- I forgot to mention places.sqlite is 90mb. I dont think that matters. I have a sqlite file 400mb which is pretty much 2 large tables. It has no performance issues

  Read the article

• How do i play nicely with MS SQL/SQL Server 2008

  - by acidzombie24

  Big problem. I have nearly given up. I am trying to port my prototype to use MS SQL so it will work on a server once i get it (the server will be SQL Server 2008, shared, i dont know any more info). So i tried to connect to SQL Server via visual studios IDE and had no luck. I enabled TCP and named pipes and restarted the service (and computer) with still no luck. I remembered about mdf files so i made that after an obstacle of not being able to make the connect string require i figure out visual studio has it in its properties and successfully connected with that. Then i had a problem with nested transactions. After not being able to figure out how to check i wondered if i can configure it to allow it somehow. I always thought all of MS were the same except for limitations but sql server seems to support nested transactions so theres no point trying to work around the problem with .mdf files since i wont need them and really just used it to port the base of my sql code and to check if syntax is correct. I tried installing SQL Server Management Studio since people mentioned it several times (as a solution or at least help). When installing it on windows 7 it says it may not be compatible. After running it, it launched SQL Server Installation Center (64-bit) which doesnt seem to be the same thing as i dont see a way to modify any of my server (networking) configurations or edit user permissions, etc. I am clueless what to do next. Does anyone have any ideas? I'm posting here bc i think my problem is more configurations and sql server then programming.

  Read the article

• Out of memory errors but not actually out of memory...

  - by commradepolski

  So, myself and my fellow support techs have been fighting with this issue and we still dont know what the problem is. Lets start off with the system specs: Windows XP 32 bit Corporate (SP2 and SP3) Intel D975XBX2 Mobo 4gb of ram Intel Core 2 Quad Q6600 ATI Radeon HD 3600 - 512mb After a few hours of working on the machine, the end user will begin to see the following symptoms: Out of memory messages Title bars and menus dont draw in properly Problems accessing network resources Problems opening up documents such as MSWord and MSPowerpoint and text files Problems opening up explorer windows General instability We have looked at task manager while this issue was occurring, and all indicators, like PF usage, threads, handles, etc. are normal. We have been having trouble pinpointing the root cause of this issue. It is also not situated with one user, it affects 8-10. So far we have tried: Resetting CMOS (Waiting to see results) Replacing video card (didnt help) Windows updates (didnt help) Updating network drivers (didnt help) Switching user from 1gbps to 100mbps network connection (awaiting results) Swapping the affected user's hardware (waiting for results) Increasing desktop heap size (helped for a bit but then the issue became more frequent) Applying the /3 switch to XP (didnt help) Increasing and decreasing and setting PF to system managed state (didnt help) We did have a power outage at the office a couple weeks ago, and all these issues became more frequent. Prior to the power outage it may take a week or so for the users to experience the issues but since the power outage it takes 3-4 hours or less. We havent had reports of the above issues causing BSODs, although that would be easier to diagnose :). Any help is greatly appreciated.

  Read the article

• Host is missing hostname and/or domain

  - by anlawang

  i use puppet 0.25.4 on ubuntu 10.04,when puppet installed ,i got the infor below : Nov 29 10:30:30 puppet puppetmasterd[4422]: Host is missing hostname and/or domain: pclient.example.com Nov 29 10:30:30 puppet puppetmasterd[4422]: Compiled catalog for pclient.example.com in 0.02 seconds i dont know how to fix it ,who can help me thank you ! my configuration : I use apt-get to install the puppet,so some configuration have been fixed puppet.conf on client : > [main] server=puppet.example.com > logdir=/var/log/puppet > vardir=/var/lib/puppet > ssldir=/var/lib/puppet/ssl > rundir=/var/run/puppet > factpath=$vardir/lib/facter > pluginsync=false > templatedir=$confdir/templates > prerun_command=/etc/puppet/etckeeper-commit-pre > postrun_command=/etc/puppet/etckeeper-commit-post > certname=pclient.example.com > node_name=cert [puppetd] > runinterval=30 puppet.conf on server: > [main] logdir=/var/log/puppet > vardir=/var/lib/puppet > ssldir=/var/lib/puppet/ssl > rundir=/var/run/puppet > factpath=$vardir/lib/facter > pluginsync=true > templatedir=$confdir/templates > prerun_command=/etc/puppet/etckeeper-commit-pre > postrun_command=/etc/puppet/etckeeper-commit-post i user the default node on site.pp i am a newer to puppet,so i dont know the reason for these problems!! thank you again!!!

  Read the article

• Ubuntu 6.06 Boot problem

  - by nijikunai

  I tried to boot my pc using ubuntu 6.06 in the live cd mode but it refuses to boot. It throws the error Uncompressing Linux.. ok, booting from kernel [ 54.168828] ACPI Unable to load the System Descriptor Tables The live cd works perfectly okay in other computers. Out of curiosity, I also tried to boot using Slax live cd, It too threw some errors incomplete literal tree invalid compressed format (err=1) UDF-fs: No partition found (1) XFS: bade magic number XFS: SB validate failed Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) The slax errors are a bit worrying to me. Thanks for the help in advance!

  Read the article

• Tips for locating my stolen computer

  - by user379468

  I'm in a bit of a panic, my new Powerbook laptop was stolen. I had no mobile me, or security software installed on the computer. I have the mac address of the computer as well as the serial number. Is there a hacky way to do this? I was even thinking perhaps of trying to use bluetooth, I know I had it set to discoverable. and I know the "name" of the computer, perhaps there is app that can scan the names of bluetooh computers in the vicinity? If there some third party you can get to scan the internet for your mac address? Any glimmer of hope would really help

  Read the article

• Two Way Sync of folder on PC to USB Thumb Drive over the internet.

  - by Tim Santeford

  Before flagging as duplicate please note that other similar posts do not have the same criteria below. Thanks Im looking for an app that will let me automatically sync a usb drive with a folder on my home system over the internet. I would like to roam from computer to computer and run this syncing app from the usb drive. Im looking for the same functionally as DropBox but without the 2gb restriction and without the need to fully install. Two Way sync between a usb drive and pc over the net Utilizes the full size of the usb drive not limited by an online storage size. (I dont need online backup or versioning) Allows the removal of the usb drive, Plugging it in to another computer will resume its sync. While the drive is connected the app should run silently keeping changed files in sync. (I dont want to run a manual process other than simply starting the app) Must be able to run as a portable app from the usb drive but can fully install on home pc. Window 7 Support is preferable. Please let me know if such and awesome app exists. TIA!

  Read the article

• PPTP VPN on Server 2008 Enterprise

  - by Mike K

  I asked this question on Server fault and was told that was not allowed so im moving it here. I am running Windows Server 2008 enterprise in my HOME network inside of vmware workstation. I am running this on my home network to setup a PPTP VPN connection at home. I have correctly setup everything I needed to make it work, including opening all the ports, 1723 and 43 (GRE). I am able to connect just fine, but when I connect I dont have internet unless I uncheck use remote gateway. The thing is, I want to use the remote gateway to route all my traffic through that connection. Can someone tell me why this isnt working and how to get it to work. When I have remote gateway checked, and I do an ipconfig I dont get a remote gateway for the VPN connection, its 0.0.0.0 when id assume if connected properly should be 192.168.1.254 (my ATT Home Router). Also, if I cant get the remote gateway issue to work, and I have to uncheck that box to get internet, does this mean my VPN session is no longer encrypted? I am fully aware the PPTP VPN is the weakest VPN encryption out there but still having that extra layer of security when im on an unsecure wifi connection makes me feel a bit better. Thank you for all your help in advance. Someone told me I need to setup a gateway or router configured on the server. If thats the case, how go I go about telling the remote co

  Read the article

• Desktop Fun: Dual Monitor Wallpaper Collection Series 2

  - by Asian Angel

  Last month we brought you the first batch of wallpapers geared specifically towards dual monitor setups. Today we present the second offering in our series of dual monitor wallpaper collections. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. More Dual Monitor Goodness Desktop Fun: Dual Monitor Wallpaper Collection Series 1 Span the same wallpaper across two monitors or use a different wallpaper for each. Dual Monitors: Use a Different Wallpaper on Each Desktop in Windows 7, Vista or XP For more wallpapers be certain to see our great collections in the Desktop Fun section. Latest Features How-To Geek ETC The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Tune Pop Enhances Android Music Notifications Another Busy Night in Gotham City Wallpaper Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper

  Read the article

• Major Google not follow increase since introducing 301 to site

  - by jakob

  Recently we implemented Varnish in front of our web nodes so that the backend would get some rest from time to time. Since varnish is case sensitive and our app was not we implemented a 301 in varnish to redirect to small case. Example: You search for PlumBer StockHOLM you will get a 301 redirect to plumber stockholm and then plumber stockholm will be cached. This worked as a charm, but when checking the Google webmaster tools we suddenly got a crazy amount of Status - Not able to follow errors. As you can see in the image below: This of course stirred up some panic and I started to read up on the documentation once again. If I pressed on one of the links I got to the help section where i found this: Well this is strange, but as the day progressed more and more errors were thrown by Google. We took the decision to make varnish return 200 instead of the 301. Now when testing the links that appears in the Not able to follow section I get a 200 back. I have tested with Chrome, curl and lynx reader and everything looks ok but the amount of errors are still increasing. What is a little bit comforting is that the links that appears in the Not able to follow section are dated before the 200 change in varnish. Why do I get these errors and why do they keep increasing? Did google release something new on October 31? Maybe I do not understand the docs correctly?

  Read the article

• Booting from USB on Mac Air (using setup_mac_usb_boot.sh)

  - by Mike O

  So, I've been working on this for hours and it's getting a little tiring. As some of you may know, installing Ubuntu on Macs is frequently an adventure, and I'm experiencing that right now. The part I'm hung up on at the moment is making a bootable USB. I would just use a CD, but my laptop is a MacBook Air (which doesn't have a CD drive), and I don't own an external CD drive. I initially attempted to use the command line method supplied by the Ubuntu documentation here: https://help.ubuntu.com/community/How%20to%20install%20Ubuntu%20on%20MacBook%20using%20USB%20Stick However, that wasn't even recognized by rEFIt even when I made a number of different modifications to the process, so I quickly decided to look elsewhere. I came across this guide: https://help.ubuntu.com/community/MacBookAir4-2#Basic_Installation_Instructions This ended up working to a large extent. If I choose the supplied grub from rEFIt, it will bring me to the Ubuntu grub, asking me to try it, install, or check the disk. And if I choose to boot Linux directly from rEFIt, it will bring me to the language selection menu. But when I make my selection from either of these menus it pauses for about ten seconds and then gives me a command line error message. It begins with kernel panic - not syncing timer doesn't work through interrupt, and then shows about eight file names. Does anyone here have any ideas as to what can be causing this? I also tried the script with both Ubuntu 11.10 (the current version when the script was written) and 12.04.

  Read the article

• I'm scared for my technical phone interview for an internship!

  - by Marie

  [EDIT 2.0 ]Hello everyone. This is my second phone interview for a development internship. My very first one was okay, but I didn't get my dream internship. Now, I'm facing fears about this upcoming interview. My fears include the following: I'm 19 years old. The thought of 2 lead developers interviewing me makes me think that I'll know so little of what they'd want me to know. Like they will expect so much. I'm a junior having these panic attacks that I did not get in the other internship. I have a little voice saying "You didn't get the other one. What makes you think you'll get this one?". I'm scared that I'll freeze up, forget everything I know, and stutter like an idiot. I'm still traumatized by the last one, because I really really wanted that internship, and I even studied very hard for it. When I was in the interview, I was so nervous I couldn't think clearly. As a result, I didn't do as well as I know I could have. The minute I hung up, I even thought of a better solution to the interview question! Any tips for a soon-to-be intern (hopefully!)? Thank you! P.S. I'm preparing by using this guide for phone interviews.

  Read the article

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Updated Intel display driver causing errors when booting

  - by cdysthe

  I upgraded to to Graphics Installer 1.0.6 on my Ubuntu 14.04 and installed the drivers using the Intel Graphics Installer. The laptop is Intel Ivybridge powered with Intel HD graphics. It Optimus but I have disabled the Nvidia card in bios. The Intel Graphics Installer installs the package i915-3.15-3.13-dkms.deb which I assume is the updated driver. It causes a bunch of error messages when I boot. Here are the relevant errors from dmesg when I boot: [ 7.206151] drm: module verification failed: signature and/or required key missing - tainting kernel [ 7.208045] drm: module has bad taint, not creating trace events [ 7.336470] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 7.393854] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013) [ 7.393855] [drm] Driver supports precise vblank timestamp query. [ 7.393921] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.505798] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 [ 7.507233] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE [ 7.944183] [drm:cpt_serr_int_handler] ERROR PCH transcoder A FIFO underrun [ 8.368479] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 8.368480] i915 0000:00:02.0: registered panic notifier [ 8.818416] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off What could the problem be and will it affect performance? I tried to remove the package and the errors went away but I'm then running and older driver I assume?

  Read the article

• How do you avoid jumping to a solution when under pressure? [closed]

  - by GlenPeterson

  When under a particularly strict programming deadline (like an hour), if I panic at all, my tendency is to jump into coding without a real plan and hope I figure it out as I go along. Given enough time, this can work, but in an interview it's been pretty unsuccessful, if not downright counter-productive. I'm not always comfortable sitting there thinking while the clock ticks away. Is there a checklist or are there techniques to recognize when you understand the problem well enough to start coding? Maybe don't touch the keyboard for the first 5-10 minutes of the problem? At what point do you give up and code a brute-force solution with the hope of reasoning out a better solution later? A related follow-up question might be, "How do you ensure that you are solving the right problem?" Or "When is it most productive to think and design more vs. code some experiments to and figure out the design later?" EDIT: One close vote already, but I'm not sure why. I wrote this in the first person, but I doubt I'm the only programmer to ever choke in an interview. Here is a list of techniques for taking a math test and another for taking an oral exam. Maybe I'm not expressing myself well, but I'm asking if there is a similar list of techniques for handling a programming problem under pressure?

  Read the article

• Error when restarting computer after successful Ubuntu 12.10 installation

  - by Amy

  I was having a lot of sudden issues with my computer (slow on start up progressing quickly to not being able to start ...even in safe mode). Worked on several different things. Finally tried formatting hd and then installing Windows 7. Got errors so I said screw it and tried Ubuntu. Downloaded it (via my laptop), burned on DVD, and tried a disc boot on my desktop. Went through the whole installation, said it was successful and progressed to the restart. It stopped at a screen with an error (0x1b5a6) from 'hd0' I don't remember the error code verbatim. Now when I try restarting it I get to the initial page, hit 'enter' on Ubuntu..and it just sits at a blank screen. Eventually it runs through this screen with a bunch of code and then just sits there. I can't type anything and enter does nothing. Some things on the screen are: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (0,0) I don't know what else to do... Restarting does not work. I have been working on fixing my computer for almost 2 days straight...

  Read the article

• How do you keep cool when production system goes down?

  - by Mag20

  This has happened to most of us... You come to work one day. Everything seems normal: the sun is shining, birds are chirping, but you notice a couple of weird things on your way to work like deja vu with cat in matrix. You get into office, there are a lot of phones ringing, but could be that they are just doing a new sales promotion. You settle in, when you notice a dark cloud hovering over you. It takes you a couple of moments, but you recognize the cloud is your boss. Usually he checks on you every morning with his "Soooo Peeeeter, how about those TCP/IP reports?" routine, but today he forgot everything about common manners and rudely invaded your personal space. No "Good Morning", just some drooling, grunts and curses. He reminds you a bit of neanderthal who is trying to get away from cyber tooth tiger, fear and panic all compressed in a tight ball. You try to decipher the new language that he created since yesterday and you start understanding that something bad happened overnight - production system went down. Now, your system is usually used by clients during regular working hours from 9-5, but for whatever reason you didn't get any alerts on your beeper (for people under 30 - beeper was like a mobile phone that could only ring and tell you who beeped you). Need to remember to charge it next time. So it is 8:45am, the system MUST be up at 9am. Every 10 seconds, your boss lets out yet another curse which communicates to you that another customer is having problems getting into the system. Also several account managers are now hovering over your boss trying to make him understand how clients are REALLY REALLY suffering. Everyone is depending on you to get the system up ASAP and at the same time hinder your progress by constantly distracting you. How do you keep cool in a situation like this?

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >