Search Results

Search found 1032 results on 42 pages for 'jon'.

Page 41/42 | < Previous Page | 37 38 39 40 41 42  | Next Page >

• Removing expired certificates from LDS (new ver of ADAM)

  - by jonthebrewer

  Hi all. This is my situation: We are in the process of replacing a certificate store currently hosted on Sun's iPlanet with Microsoft's Lightweight Directory Services (new version of ADAM with Server 2008). These certificates have been imported into LDS into an application partition (say o=myorg, C=AU). Under this structure I have around 40,000 OU's each one representing a customer under each customers OU are one or more user (iNetOrg) objects (around 60,000 in all). In each user are one or more certificates in the UserCertificate attribute. A combination of in-house written application code and proprietory PKI code reads and publishes these certficates to validate financial transactions. As the LDAP path of the certificates is stored within the customer certificates (and within the application code) and there is zero appetite for changing any of the code, I have had to pick up the iPlanet directory as a whole and dump it in LDS in the same structure. (I will not be using or hosting a Microsoft CA, just implementing an LDAP compliant directory to host these certificates) We have fully tested the application using the data in LDS and everything works fine - here is my dilema and question (finally, phew!) There was no process put in place for removing revoked or expired certificates, consequently the vast majority of the data is completely useless, the system has been running for about 8 years! I have done a quick analysis and I estimate that at least 80% of the data is no longer valid. As I am taking on responsibility for managing the directory I would like to start with a clean directory. Does anyone have any idea how I can cleanup these expired certificates. I am not a highly experienced scripter but have some background in VB. I have been researching the use of CAPICOM and have a feeling this may be able to be used but in exactly what way I am not sure?? I would prefer to write a script that I could specify an expiration date (say any certs that expired prior to 2010) then run against the LDS paritition. This way I can reuse the script periodically to cleanup the directory (as mentioned above - I have no way to adjust the applications that are writing the certs, this is with a third party). Another, less attractive, alternative is to massage the LDIF file (2.7 million lines!) to rip the certs out prior to the import Any help and advice MUCH appreciated. Cheers Jon

  Read the article

• Reflection - SetValue of array within class?

  - by Jaymz87

  OK, I've been working on something for a while now, using reflection to accomplish a lot of what I need to do, but I've hit a bit of a stumbling block... I'm trying to use reflection to populate the properties of an array of a child property... not sure that's clear, so it's probably best explained in code: Parent Class: Public Class parent Private _child As childObject() Public Property child As childObject() Get Return _child End Get Set(ByVal value As child()) _child = value End Set End Property End Class Child Class: Public Class childObject Private _name As String Public Property name As String Get Return _name End Get Set(ByVal value As String) _name = value End Set End Property Private _descr As String Public Property descr As String Get Return _descr End Get Set(ByVal value As String) _descr = value End Set End Property End Class So, using reflection, I'm trying to set the values of the array of child objects through the parent object... I've tried several methods... the following is pretty much what I've got at the moment (I've added sample data just to keep things simple): Dim Results(1) As String Results(0) = "1,2" Results(1) = "2,3" Dim parent As New parent Dim child As childObject() = New childObject() {} Dim PropInfo As PropertyInfo() = child.GetType().GetProperties() Dim i As Integer = 0 For Each res As String In Results Dim ResultSet As String() = res.Split(",") ReDim child(i) Dim j As Integer = 0 For Each PropItem As PropertyInfo In PropInfo PropItem.SetValue(child, ResultSet(j), Nothing) j += 1 Next i += 1 Next parent.child = child This fails miserably on PropItem.SetValue with ArgumentException: Property set method not found. Anyone have any ideas? @Jon :- Thanks, I think I've gotten a little further, by creating individual child objects, and then assigning them to an array... The issue is now trying to get that array assigned to the parent object (using reflection). It shouldn't be difficult, but I think the problem comes because I don't necessarily know the parent/child types. I'm using reflection to determine which parent/child is being passed in. The parent always has only one property, which is an array of the child object. When I try assigning the child array to the parent object, I get a invalid cast exception saying it can't convert Object[] to . EDIT: Basically, what I have now is: Dim PropChildInfo As PropertyInfo() = ResponseObject.GetType().GetProperties() For Each PropItem As PropertyInfo In PropChildInfo PropItem.SetValue(ResponseObject, ResponseChildren, Nothing) Next ResponseObject is an instance of the parent Class, and ResponseChildren is an array of the childObject Class. This fails with: Object of type 'System.Object[]' cannot be converted to type 'childObject[]'.

  Read the article

• How do I prevent the concurrent execution of a javascript function?

  - by RyanV

  I am making a ticker similar to the "From the AP" one at The Huffington Post, using jQuery. The ticker rotates through a ul, either by user command (clicking an arrow) or by an auto-scroll. Each list-item is display:none by default. It is revealed by the addition of a "showHeadline" class which is display:list-item. HTML for the UL Looks like this: <ul class="news" id="news"> <li class="tickerTitle showHeadline">Test Entry</li> <li class="tickerTitle">Test Entry2</li> <li class="tickerTitle">Test Entry3</li> </ul> When the user clicks the right arrow, or the auto-scroll setTimeout goes off, it runs a tickForward() function: function tickForward(){ var $active = $('#news li.showHeadline'); var $next = $active.next(); if($next.length==0) $next = $('#news li:first'); $active.stop(true, true); $active.fadeOut('slow', function() {$active.removeClass('showHeadline');}); setTimeout(function(){$next.fadeIn('slow', function(){$next.addClass('showHeadline');})}, 1000); if(isPaused == true){ } else{ startScroll() } }; This is heavily inspired by Jon Raasch's A Simple jQuery Slideshow. Basically, find what's visible, what should be visible next, make the visible thing fade and remove the class that marks it as visible, then fade in the next thing and add the class that makes it visible. Now, everything is hunky-dory if the auto-scroll is running, kicking off tickForward() once every three seconds. But if the user clicks the arrow button repeatedly, it creates two negative conditions: Rather than advance quickly through the list for just the number of clicks made, it continues scrolling at a faster-than-normal rate indefinitely. It can produce a situation where two (or more) list items are given the .showHeadline class, so there's overlap on the list. I can see these happening (especially #2) because the tickForward() function can run concurrently with itself, producing different sets of $active and $next. So I think my question is: What would be the best way to prevent concurrent execution of the tickForward() method? Some things I have tried or considered: Setting a Flag: When tickForward() runs, it sets an isRunning flag to true, and sets it back to false right before it ends. The logic for the event handler is set to only call tickForward() if isRunning is false. I tried a simple implementation of this, and isRunning never appeared to be changed. The jQuery queue(): I think it would be useful to queue up the tickForward() commands, so if you clicked it five times quickly, it would still run as commanded but wouldn't run concurrently. However, in my cursory reading on the subject, it appears that a queue has to be attached to the object its queue applies to, and since my tickForward() method affects multiple lis, I don't know where I'd attach it.

  Read the article

• Advice on displaying and allowing editing of data using ASP.NET MVC?

  - by Remnant

  I am embarking upon my first ASP.NET MVC project and I would like to get some input on possible ways to display database data and general best practice. In short, the body of my webpage will show data from my database in a table like format, with each table row showing similar data. For example: Name Age Position Date Joined Jon Smith 23 Striker 18th Mar 2005 John Doe 38 Defender 3rd Jan 1988 In terms of functionality, primarily I’d like to give the user the ability to edit the data and, after the edit, commit the edit to the database and refresh the view.The reason I want to refresh the view is because the data is date ordered and I will need to re-sort if the user edits a date field. My main question is what architecture / tools would be best suited to this fulfil my requirements at a high level? From the research I have done so far my initial conclusions were: ADO.NET for data retrieval. This is something I have used before and feel comfortable with. I like the look of LINQ to SQL but don’t want to make the learning curve any steeper for my first outing into MVC land just yet. Partial Views to create a template and then iterate through a datatable that I have pulled back from my database model. jQuery to allow the user to edit data in the table, error check edited data entries etc. Also, my intial view was that caching the data would not be a key requirement here. The only field a user will be able to update is the field and, if they do, I will need to commit that data to the database immediately and then refresh the view (as the data is date sorted). Any thoughts on this? Alternatively, I have seen some jQuery plug-ins that emulate a datagrid and provide associated functionality. My first thoughts are that I do not need all the functionality that comes with these plug-ins (e.g. zebra striping, ability to sort by column using sort glyph in column headers etc .) and I don’t really see any benefit to this over and above the solution I have outlined above. Again, is there reason to reconsider this view? Finally, when a user edits a date , I will need to refresh the view. In order to do this I had been reading about Html.RenderAction and this seemed like it may be a better option than using Partial Views as I can incorporate application logic into the action method. Am I right to consider Html.RenderAction or have I misunderstood its usage? Hope this post is clear and not too long. I did consider separate posts for each topic (e.g. Partial View vs. Html.RenderAction, when to use jQury datagrid plug-in) but it feels like these issues are so intertwined that they need to be dealt with in contect of each other. Thanks

  Read the article

• C# Begin/EndReceive - how do I read large data?

  - by ryeguy

  When reading data in chunks of say, 1024, how do I continue to read from a socket that receives a message bigger than 1024 bytes until there is no data left? Should I just use BeginReceive to read a packet's length prefix only, and then once that is retrieved, use Receive() (in the async thread) to read the rest of the packet? Or is there another way? edit: I thought Jon Skeet's link had the solution, but there is a bit of a speedbump with that code. The code I used is: public class StateObject { public Socket workSocket = null; public const int BUFFER_SIZE = 1024; public byte[] buffer = new byte[BUFFER_SIZE]; public StringBuilder sb = new StringBuilder(); } public static void Read_Callback(IAsyncResult ar) { StateObject so = (StateObject) ar.AsyncState; Socket s = so.workSocket; int read = s.EndReceive(ar); if (read > 0) { so.sb.Append(Encoding.ASCII.GetString(so.buffer, 0, read)); if (read == StateObject.BUFFER_SIZE) { s.BeginReceive(so.buffer, 0, StateObject.BUFFER_SIZE, 0, new AyncCallback(Async_Send_Receive.Read_Callback), so); return; } } if (so.sb.Length > 0) { //All of the data has been read, so displays it to the console string strContent; strContent = so.sb.ToString(); Console.WriteLine(String.Format("Read {0} byte from socket" + "data = {1} ", strContent.Length, strContent)); } s.Close(); } Now this corrected works fine most of the time, but it fails when the packet's size is a multiple of the buffer. The reason for this is if the buffer gets filled on a read it is assumed there is more data; but the same problem happens as before. A 2 byte buffer, for exmaple, gets filled twice on a 4 byte packet, and assumes there is more data. It then blocks because there is nothing left to read. The problem is that the receive function doesn't know when the end of the packet is. This got me thinking to two possible solutions: I could either have an end-of-packet delimiter or I could read the packet header to find the length and then receive exactly that amount (as I originally suggested). There's problems with each of these, though. I don't like the idea of using a delimiter, as a user could somehow work that into a packet in an input string from the app and screw it up. It also just seems kinda sloppy to me. The length header sounds ok, but I'm planning on using protocol buffers - I don't know the format of the data. Is there a length header? How many bytes is it? Would this be something I implement myself? Etc.. What should I do?

  Read the article

• Convert a PDF to a Transparent PNG with GhostScript

  - by Jonathon Wolfe

  Hi all. I am attempting, unsuccessfully, to use Ghostscript to rasterize PDF files with a transparent background to PNG files with a transparent background. I've searched high and low for questions from others attempting the same thing and none of the posted solutions, which as far as I can tell come down to specifying -sDEVICE=pngalpha, have worked with my test files. At this point I would really appreciate any advice or tips a more experienced hand could provide. My test PDF is located here: http://www.kolossus.com/files/test.pdf It could be that the issue is with this file, but I doubt it. As far as I can tell, it has no specified background, and when I open the file with a transparency-aware app like Photoshop or Illustrator, sure enough it displays with a transparent background. However, when opened with an application like Adobe Reader the file is rendered with a white background. I believe that this has more to do with the application rendering the PDF than with the PDF itself -- apps like Adobe Reader assume you want to see what a printed document will look like and therefore always show a white canvas behind the artwork -- but I can't be sure. The gs command I'm using is: gs -dNOPAUSE -dBATCH -sDEVICE=pngalpha -r72 -sOutputFile=test.png test.pdf This produces a PNG that has transparent pixels outside of the bounding box of the artwork in the file, but all pixels that are inside the artwork's bounding box are rasterized against a white background. This is a problem for me, as my artwork has drop shadows and antialiased edges that need to be preserved in the final output, and can't just be postprocessed out with ImageMagick. A sample of my PNG output is at the same location as the pdf above, with .png at the end (stackoverflow won't let me include more than one url in my post). Interestingly, I see no effects from using the -dBackgroundColor flag, even if I set it to something non-white like -dBackgroundColor=16#ff0000. Perhaps my understanding of the syntax of this flag is wrong. Also interestingly, I see no effects from using the -dTextAlphaBits=4 -dGraphicsAlphaBits=4 flags to try to enable subpixel antialiasing. I would also appreciate any advice on how to enable subpixel antialiasing, especially on text. Finally, I'm using GPL Ghostscript 8.64 on Mac OS 10.5.7, and the rendering workflow I'm trying to get set up is to generate transparent PNG images from PDFs output by PrinceXML. I'm calling Ghostscript directly for the rasterization instead of using ImageMagick because ImageMagick delegates to Ghostscript for PDF rasterization and I should be able to control the rasterization better by calling GS directly. Thanks for your help. -Jon Wolfe

  Read the article

• How is IObservable<double>.Average supposed to work?

  - by Dan Tao

  Update Looks like Jon Skeet was right (big surprise!) and the issue was with my assumption about the Average extension providing a continuous average (it doesn't). For the behavior I'm after, I wrote a simple ContinuousAverage extension method, the implementation of which I am including here for the benefit of others who may want something similar: public static class ObservableExtensions { private class ContinuousAverager { private double _mean; private long _count; public ContinuousAverager() { _mean = 0.0; _count = 0L; } // undecided whether this method needs to be made thread-safe or not // seems that ought to be the responsibility of the IObservable (?) public double Add(double value) { double delta = value - _mean; _mean += (delta / (double)(++_count)); return _mean; } } public static IObservable<double> ContinousAverage(this IObservable<double> source) { var averager = new ContinuousAverager(); return source.Select(x => averager.Add(x)); } } I'm thinking of going ahead and doing something like the above for the other obvious candidates as well -- so, ContinuousCount, ContinuousSum, ContinuousMin, ContinuousMax ... perhaps ContinuousVariance and ContinuousStandardDeviation as well? Any thoughts on that? Original Question I use Rx Extensions a little bit here and there, and feel I've got the basic ideas down. Now here's something odd: I was under the impression that if I wrote this: var ticks = Observable.FromEvent<QuoteEventArgs>(MarketDataProvider, "MarketTick"); var bids = ticks .Where(e => e.EventArgs.Quote.HasBid) .Select(e => e.EventArgs.Quote.Bid); var bidsSubscription = bids.Subscribe( b => Console.WriteLine("Bid: {0}", b) ); var avgOfBids = bids.Average(); var avgOfBidsSubscription = avgOfBids.Subscribe( b => Console.WriteLine("Avg Bid: {0}", b) ); I would get two IObservable<double> objects (bids and avgOfBids); one would basically be a stream of all the market bids from my MarketDataProvider, the other would be a stream of the average of these bids. So something like this: Bid Avg Bid 1 1 2 1.5 1 1.33 2 1.5 It seems that my avgOfBids object isn't doing anything. What am I missing? I think I've probably misunderstood what Average is actually supposed to do. (This also seems to be the case for all of the aggregate-like extension methods on IObservable<T> -- e.g., Max, Count, etc.)

  Read the article

• Call HttpWebRequest in another thread as UI with Task class - avoid to dispose object created in Task scope

  - by John

  I would like call HttpWebRequest on another thread as UI, because I must make 200 request or server and downloaded image. My scenation is that I make a request on server, create image and return image. This I make in another thread. I use Task class, but it call automaticaly Dispose method on all object created in task scope. So I return null object from this method. public BitmapImage CreateAvatar(Uri imageUri, int sex) { if (imageUri == null) return CreateDefaultAvatar(sex); BitmapImage image = null; new Task(() => { var request = WebRequest.Create(imageUri); var response = request.GetResponse(); using (var stream = response.GetResponseStream()) { Byte[] buffer = new Byte[response.ContentLength]; int offset = 0, actuallyRead = 0; do { actuallyRead = stream.Read(buffer, offset, buffer.Length - offset); offset += actuallyRead; } while (actuallyRead > 0); image = new BitmapImage { CreateOptions = BitmapCreateOptions.None, CacheOption = BitmapCacheOption.OnLoad }; image.BeginInit(); image.StreamSource = new MemoryStream(buffer); image.EndInit(); image.Freeze(); } }).Start(); return image; } How avoid it? Thank Mr. Jon Skeet try this: private Stream GetImageStream(Uri imageUri) { Byte[] buffer = null; //new Task(() => //{ var request = WebRequest.Create(imageUri); var response = request.GetResponse(); using (var stream = response.GetResponseStream()) { buffer= new Byte[response.ContentLength]; int offset = 0, actuallyRead = 0; do { actuallyRead = stream.Read(buffer, offset, buffer.Length - offset); offset += actuallyRead; } while (actuallyRead > 0); } //}).Start(); return new MemoryStream(buffer); } It return object which is null a than try this: private Stream GetImageStream(Uri imageUri) { Byte[] buffer = null; new Task(() => { var request = WebRequest.Create(imageUri); var response = request.GetResponse(); using (var stream = response.GetResponseStream()) { buffer= new Byte[response.ContentLength]; int offset = 0, actuallyRead = 0; do { actuallyRead = stream.Read(buffer, offset, buffer.Length - offset); offset += actuallyRead; } while (actuallyRead > 0); } }).Start(); return new MemoryStream(buffer); } Method above return null

  Read the article

• Delegates in Action -Help

  - by Amutha

  I am learning delegates.I am very curious to apply delegates to the following chain-of-responsibility pattern. Kindly help me the way to apply delegates to the following piece. Thanks in advance.Thanks for your effort. #region Chain of Responsibility Pattern namespace Chain { public class Player { public string Name { get; set; } public int Score { get; set; } } public abstract class PlayerHandler { protected PlayerHandler _Successor = null; public abstract void HandlePlayer(Player _player); public void SetupHandler(PlayerHandler _handler) { _Successor = _handler; } } public class Employee : PlayerHandler { public override void HandlePlayer(Player _player) { if (_player.Score <= 100) { MessageBox.Show(string.Format("{0} is greeted by Employee", _player.Name)); } else { _Successor.HandlePlayer(_player); } } } public class Supervisor : PlayerHandler { public override void HandlePlayer(Player _player) { if (_player.Score >100 && _player.Score<=200) { MessageBox.Show(string.Format("{0} is greeted by Supervisor", _player.Name)); } else { _Successor.HandlePlayer(_player); } } } public class Manager : PlayerHandler { public override void HandlePlayer(Player _player) { if (_player.Score > 200) { MessageBox.Show(string.Format("{0} is greeted by Manager", _player.Name)); } else { MessageBox.Show(string.Format("{0} got low score", _player.Name)); } } } } #endregion #region Main() void Main() { Chain.Player p1 = new Chain.Player(); p1.Name = "Jon"; p1.Score = 100; Chain.Player p2 = new Chain.Player(); p2.Name = "William"; p2.Score = 170; Chain.Player p3 = new Chain.Player(); p3.Name = "Robert"; p3.Score = 300; Chain.Employee emp = new Chain.Employee(); Chain.Manager mgr = new Chain.Manager(); Chain.Supervisor sup = new Chain.Supervisor(); emp.SetupHandler(sup); sup.SetupHandler(mgr); emp.HandlePlayer(p1); emp.HandlePlayer(p2); emp.HandlePlayer(p3); } #endregion

  Read the article

• Is this a valid pattern for raising events in C#?

  - by Will Vousden

  Update: For the benefit of anyone reading this, since .NET 4, the lock is unnecessary due to changes in synchronization of auto-generated events, so I just use this now: public static void Raise<T>(this EventHandler<T> handler, object sender, T e) where T : EventArgs { if (handler != null) { handlerCopy(sender, e); } } And to raise it: SomeEvent.Raise(this, new FooEventArgs()); Having been reading one of Jon Skeet's articles on multithreading, I've tried to encapsulate the approach he advocates to raising an event in an extension method like so (with a similar generic version): public static void Raise(this EventHandler handler, object @lock, object sender, EventArgs e) { EventHandler handlerCopy; lock (@lock) { handlerCopy = handler; } if (handlerCopy != null) { handlerCopy(sender, e); } } This can then be called like so: protected virtual void OnSomeEvent(EventArgs e) { this.someEvent.Raise(this.eventLock, this, e); } Are there any problems with doing this? Also, I'm a little confused about the necessity of the lock in the first place. As I understand it, the delegate is copied in the example in the article to avoid the possibility of it changing (and becoming null) between the null check and the delegate call. However, I was under the impression that access/assignment of this kind is atomic, so why is the lock necessary? Update: With regards to Mark Simpson's comment below, I threw together a test: static class Program { private static Action foo; private static Action bar; private static Action test; static void Main(string[] args) { foo = () => Console.WriteLine("Foo"); bar = () => Console.WriteLine("Bar"); test += foo; test += bar; test.Test(); Console.ReadKey(true); } public static void Test(this Action action) { action(); test -= foo; Console.WriteLine(); action(); } } This outputs: Foo Bar Foo Bar This illustrates that the delegate parameter to the method (action) does not mirror the argument that was passed into it (test), which is kind of expected, I guess. My question is will this affect the validity of the lock in the context of my Raise extension method? Update: Here is the code I'm now using. It's not quite as elegant as I'd have liked, but it seems to work: public static void Raise<T>(this object sender, ref EventHandler<T> handler, object eventLock, T e) where T : EventArgs { EventHandler<T> copy; lock (eventLock) { copy = handler; } if (copy != null) { copy(sender, e); } }

  Read the article

• Top tweets SOA Partner Community – October 2012

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity SOA Community Deploying Fusion Order Demo on 11.1.1.6 by Antony Reynolds http://wp.me/p10C8u-vA leonsmiers ?Cant wait to test it >> 't waiRT @OracleSOA: Case Management patterns, session coverage from #OOW #OracleBPM #ACM #BPM http://bit.ly/OdcZL6 Danilo Schmiedel Bye bye San Francisco. #oow was a great conference in a wonderful city! Thanks! @soacommunity pic.twitter.com/lcYSe9xC OPITZ CONSULTING ?The Journey towards #Oracle #BPM @OpenWorld 2012 - Slides by @t_winterberg & H. Normann: http://ow.ly/edkWE #oow demed Full house at the SOA Customer Advisory Board! #oow12 http://instagr.am/p/QX9B8eLMLS/ Danilo Schmiedel "@whitehorsesnl: Had some great talks with the BPM guys at the DEMOgrounds. It is one of the best things at #oow" -> I agree!! @soacommunity Mark Simpson ?Fusion Middleware Global Innovation Awards: nice to pick up a soa and bpm with our customer. #oow Mark Simpson ?RT @SOASimone: #oraclesoa #oow hands on lab fully booked pic.twitter.com/pwI94Ew7 <--quick, provision some more compute power on the cloud! Oracle SOA ?Join us for BPM and Analytics: Process Dashboards. BAM, and Intelligent OptimizationMoscone South - 308#OracleBPM #OOW Oracle SOA ?Real-time public safety demo! License plate recognition and processing in London via Oracle Event Processing. #oow pic.twitter.com/WufesDBq Marc ?Nice session on customer success stories on #SOA11g on with @SOASimone Pro and cons and architectural overview. #oow pic.twitter.com/bzuhsujm Lucas Jellema Full length Keynote on Middleware #oow : http://medianetwork.oracle.com/video/player/1873556035001 … #oow_amis OracleBlogs ?Why Fusion Middleware matters to Oracle Applications and Fusion Applications customers? http://ow.ly/2stVQ0 OracleBlogs ?Open World Session - BPM, SOA and ADF Combined:Patterns learned from Fusion Applications http://ow.ly/2suhzf Ronald Luttikhuizen ?VENNSTER BLOG | Presentations at OpenWorld 2012 | http://blog.vennster.nl/2012/10/presentations-at-openworld-2012.html … Andrejus Baranovskis @dschmied @soacommunity next OOW for sure, and may be SOA community event ! @soacommunity Danilo Schmiedel ?@andrejusb Thanks Andrejus - I really enjoyed having a session with you at #oow. When is next time :-) ? @soacommunity Lionel Dubreuil ?@soacommunity #oow12 Today-1:15pm-Marriott Marquis Salon 7 Jump-starting Integration with Oracle Foundation Pack http://bit.ly/QKKJzF Ronald Luttikhuizen ?Impression from our fault handling session in OSB and SOA Suite from the audience @soacommunity @gschmutz #oow pic.twitter.com/WSg1Z89E Marc Nice session on Oracle Virtual Assembly for #SOA11g, @soacommunity Works with #exalogic but not required SOA Community ?Send your #soacommunity #oow pictures and blog posts @soacommunity or http://www.facebook.com/soacommunity Enjoy OOW ;-) Jon petter hjulstad Oracle BPM- Big leap forward in 11.1.1.7 ! Whitehorses ?Common BPM Use Cases from Oracle #bpm #oow pic.twitter.com/ofOv04EF Whitehorses ?Oracle BPM 11.1.1.7 top new features. Interesting #oow #oowbenelux pic.twitter.com/HY9QN5un SOA Community Industrialized SOA - topic of Business Technology Magazine http://wp.me/p10C8u-vi orclateamsoa ?A-Team Blog #ateam: The curious case of SOA Human tasks' automatic completion http://ow.ly/1mq6YU Simone Geib Look for this sign #oow #oraclesoa pic.twitter.com/MJsPV4PO Lucas Jellema My summary of Larry Ellison's keynote at #oow on the AMIS Blog: http://technology.amis.nl/2012/10/01/oow-2012-larry-ellisons-keynote-announcements-exa-cloud-database/ … #oow_amis gschmutz ?Join my #oow session "Five Cool Use Cases for the Spring Component" to see the power of Spring and SOA Suite combined! Moscone 310 - 3:15 PM Ronald Luttikhuizen Thanks to @soacommunity for great SOA/BPM dinner event yesterday night! #oow pic.twitter.com/v7x3i0DC OracleBlogs ?OSB, Service Callouts and OQL http://ow.ly/2sq6B2 OracleBlogs ?Cloud and On-Premises Applications Integration using Oracle Integration Adapters http://ow.ly/2sqiDy OracleBlogs ?Adapters, SOA Suite and More @Openworld 2012 http://ow.ly/2srdTg Eric Elzinga ?OSB, Service Callouts and OQL - Part 3, http://see.sc/JodzEx #oracleservicebus Donatas Valys interesting articles about soa industrialization to read #soa #industrialization http://it-republik.de/business-technology/bt-magazin-ausgaben/Industrialized-SOA-000516.html … gschmutz ?“@techsymp: 2012 Symposium Presentation Download Page Now Available! 75% of presentations published. http://www.servicetechsymposium.com ” find mine there.. Oracle BPM Customer Experience and BPM – From Efficiency to Engagement #bpm #oraclebpm #processmanagement #socialbpm http://pub.vitrue.com/Tahi SOA Community ?@soacommunity SOA Community Newsletter September 2012 http://wp.me/p10C8u-wa SOA Community again again again.... it is Oracle Open World 2012 http://wp.me/p10C8u-wk OracleBlogs ?SOA Proactive support http://ow.ly/2smrSJ demed ?@gschmutz on NoSQL at @techsymp http://lockerz.com/s/247601661 demed ?Just finished "#BigData and its impact on #SOA" talk @techsymp. Really enjoyed getting out of beaten path. #london #oep http://lockerz.com/s/247636974 OTNArchBeat ?Need help selling SOA to business stakeholders? Give them this free eBook. #soasuite http://pub.vitrue.com/hsQY SOA Community top Tweets SOA Partner Community &ndash; September 2012 http://wp.me/p10C8u-vc SOA Community Move Data into the grid for scalable, predictable response times http://wp.me/p10C8u-vv ServiceTechSymposium ?The September issue of the Service Technology Magazine is now published with six new items! Read them at http://www.servicetechmag.com Marc ?Reviewed @Packt_OracleFMW new book on SOA11g administration! Very good ! http://tinyurl.com/8pzd5ww SOA Community ?BPM Solution Catalogue&ndash;promote your process templates http://wp.me/p10C8u-vt OTNArchBeat ?BPM ADF Task forms: Checking whether the current user is in a BPM Swimlane | @ChrisKarlChan http://pub.vitrue.com/aPMG OTNArchBeat ?Cloud, automation drive new growth in SOA governance market | @JoeMcKendrick http://pub.vitrue.com/hNPv Simon Haslam ?Looking for "oak style"(!) advanced content but you're a middleware specialist? See #ukoug2012 #middlewaresunday http://2012.ukoug.org/default.asp?p=9355 … Simon Haslam ?The #ukoug2012 agenda is "go, go, go!" (as Murray would say!) http://2012.ukoug.org/agendagrid Germán Gazzoni SOA Spezial II verfügbar – Industralized SOA: Die überarbeitete und ergänzte Neuauflage des SOA Spezial Sonderhe... http://bit.ly/PAWwN9 Oracle SOA ?Flip thru new interactive "Oracle SOA Suite eBook-In the Customers Words" #middleware #soa #oraclesoa http://pub.vitrue.com/NzFZ SOA Community Follow SOA Community on Facebook http://www.facebook.com/soacommunity #soacommunity #opn SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community twitter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• Finding a person in the forest

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved finding a person in the forest or Limiting the AD result in SharePoint People Picker There are times when we need to limit the SharePoint audience of certain farms or servers or site collections to a particular audience. One of my experiences involved limiting access to US citizens, another to a particular location. Now, most of us – your humble servant included – are not Active Directory experts – but we must be able to handle the “audience restrictions” as required. So here is how it’s done in a nutshell. Important note. Not all could be done in PowerShell (at least not yet)! There are no Windows PowerShell commands to configure People Picker. The stsadm command is: stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv ADQuery –url http://somethingOrOther Note the long-hyphenated property name. Now to filling the ADQuery.   LDAP Query in a nutshell Syntax LDAP is no older than SQL and an LDAP query is actually a query against the LDAP Database. LDAP attributes are the equivalent of Database columns, so why do we have to learn a new query language? Beats me! But we must, so here it is. The syntax of an LDAP query string is made of individual statements with relational operators including: = Equal <= Lower than or equal >= Greater than or equal… and memberOf – a group membership. ! Not * Wildcard Equal and memberOf are the most commonly used. Checking for absence uses the ! – not and the * - wildcard Example: (SN=Grant) All whose last name – SurName – is Grant Example: (!(SN=Grant)) All except Grant Example: (!(SN=*)) all where there is no SurName i.e SurName is absent (probably Rappers). Example: (CN=MyGroup) Common Name is MyGroup.  Example: (GN=J*) all the Given Names that start with J (JJ, Jane, Jon, John, etc.) The cryptic SN, CN, GN, etc. are attributes and more about them later All the queries are enclosed in parentheses (Query). Complex queries are comprised of sets that are in AND or OR conditions. AND is denoted by the ampersand (&) and the OR is denoted by the vertical pipe (|). The general syntax is that of the Prefix polish notation where the operand precedes the variables. E.g +ab is the sum of a and b. In an LDAP query (&(A)(B)) will garner the objects for which both A and B are true. In an LDAP query (&(A)(B)(C)) will garner the objects for which A, B and C are true. There’s no limit to the number of conditions. In an LDAP query (|(A)(B)) will garner the objects for which either A or B are true. In an LDAP query (|(A)(B)(C)) will garner the objects for which at least one of A, B and C is true. There’s no limit to the number of conditions. More complex queries have both types of conditions and the parentheses determine the order of operations. Attributes Now let’s get into the SN, CN, GN, and other attributes of the query SN – is the SurName (last name) GN – is the Given Name (first name) CN – is the Common Name, usually GN followed by SN OU – is an Organization Unit such as division, department etc. DC – is a Domain Content in the AD forest l – lower case ‘L’ stands for location. Jerusalem anybody? Or Katmandu. UPN – User Principal Name, is usually the first part of an email address. By nature it is unique in the forest. Most systems set the UPN to be the first initial followed by the SN of the person involved. Some limit the total to 8 characters. If we have many ‘jsmith’ we have to somehow distinguish them from each other. DN – is the distinguished name – a name unique to AD forest in which it lives. Usually it’s a CN with some domain or group distinguishers. DN is important in conjunction with the memberOf relation. Groups have stricter requirement. Each group has to have a unique name - its CN and it has to be unique regardless of its place. See more below. All of the attributes are case insensitive. CN, cn, Cn, and cN are identical. objectCategory is an element that requires special consideration. AD contains many different object like computers, printers, and of course people and groups. In the queries below, we’re limiting our search to people (person). Putting it altogether Let’s get a list of all the Johns in the SPAdmin group of the Jerusalem that local domain. (&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local)) The memberOf=cn=SPAdmin uses the cn (Common Name) of the SPAdmin group. This is how the memberOf relation is used. ‘SPAdmin’ is actually the DN of the group. Also the memberOf relation does not allow wild cards (*) in the group name. Also, you are limited to at most one ‘OU’ entry. Let’s add Marvin Minsky to the search above. |(&(objectCategory=person)(memberOf=cn=SPAdmin,ou=Jerusalem,dc=local))(CN=Marvin Minsky) Here I added the or pipeline at the beginning of the query and put the CN requirement for Minsky at the end. Note that if Marvin was already in the prior result, he’s not going to be listed twice. One last note: You may see a dryer but more complete list of attributes rules and examples in: http://www.tek-tips.com/faqs.cfm?fid=5667 And finally (thus negating the claim that my previous note was last), to the best of my knowledge there are 3 more ways to limit the audience. One is to use the peoplepicker-searchadcustomfilter property using the same ADQuery. This works only in SP1 and above. The second is to limit the search to users within this particular site collection – the property name is peoplepicker-onlysearchwithinsitecollection and the value is yes (-pv yes) And the third is –pn peoplepicker-serviceaccountdirectorypaths –pv “OU=ou1,DC=dc1…..” Again you are limited to at most one ‘OU’ phrase – no OU=ou1,OU=ou2… And now the real end. The main property discussed in this sprawling and seemingly endless monogram – peoplepicker-searchadcustomquery - is the most general way of getting the job done. Here are a few examples of command lines that worked and some that didn’t. Can you see why? C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (!Title=David) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,OU=OUMid,OU=OUTop,DC=TopDC,DC=MidDC,DC=BottomDC) Command line error. Too many OUs C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully. C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\BIN>stsa dm -o setproperty -url http://somethingOrOther -pn peoplepicker-searchadcustomfi lter -pv (OU=OURealName,DC=TopDC,DC=MidDC,DC=BottomDC) Operation completed successfully.   That’s all folks!

  Read the article

• Stuck removing ffmpeg from system due to package problems

  - by Michiel

  I'd be very grateful to get a bit of support on the following situation: Using Ubuntu 12.04, and I used the PPA of Jon Severinson for ffmpeg. I had a problem playing movies with mplayer, so I decided to remove the PPA and try to use libav only after I read this article about libav vs ffmpeg. I first removed the PPA from the list, then apt-get update, etc. But I couldn't remove ffmpeg due to dependency-errors and got stuck in what seemed some kind of loop. Then I found a suggestion here. I followed the steps, and ended up force-removing libavcodec-extra-53. Because, apparently that was "what got stuff moving again". At the moment I can't. Now Ubuntu is reporting a broken package (BrokenCount 0). Errors: De afhankelijkheden van de volgende pakketten konden niet geïnstalleerd worden: audacious-plugins: Depends: audacious-plugins-data (= 3.2.1-4ubuntu1) maar 3.2.1-4ubuntu1 is geïnstalleerd Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libcurl3-gnutls (= 7.16.2-1) maar 7.22.0-3ubuntu4 is geïnstalleerd Depends: libgcc1 (= 1:4.1.1) maar 1:4.6.3-1ubuntu5 is geïnstalleerd Depends: libpulse0 (= 1:0.99.1) maar 1:1.1-0ubuntu15.1 is geïnstalleerd Depends: libstdc++6 (= 4.6) maar 4.6.3-1ubuntu5 is geïnstalleerd Depends: libwavpack1 (= 4.40.0) maar 4.60.1-2 is geïnstalleerd Depends: libxcomposite1 (= 1:0.3-1) maar 1:0.4.3-2build1 is geïnstalleerd Depends: zlib1g (= 1:1.1.4) maar 1:1.2.3.4.dfsg-3ubuntu4 is geïnstalleerd libavfilter-extra-2: Depends: libavcodec-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar het is niet geïnstalleerd Depends: libavcodec-extra-53 (< 6:0.10.4.0ubuntu0jon2.2-99) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libswresample-extra-0 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libswscale-extra-2 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd libavformat-extra-53: Depends: libavcodec-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar het is niet geïnstalleerd Depends: libavcodec-extra-53 (< 6:0.10.4.0ubuntu0jon2.2-99) maar het is niet geïnstalleerd Depends: libavutil-extra-51 (= 6:0.10.4.0ubuntu0jon2.2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd libk3b6-extracodecs: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libc6 (= 2.14) maar 2.15-0ubuntu10 is geïnstalleerd Depends: libkdecore5 (= 4:4.4.4) maar 4:4.8.4a-0ubuntu0.2 is geïnstalleerd Depends: libkio5 (= 4:4.4.4) maar 4:4.8.4a-0ubuntu0.2 is geïnstalleerd Depends: libqtcore4 (= 4:4.7.0~beta1) maar 4:4.8.1-0ubuntu4.2 is geïnstalleerd Depends: libstdc++6 (= 4.1.1) maar 4.6.3-1ubuntu5 is geïnstalleerd libquicktime2: Depends: libavcodec-extra-53 (= 4:0.8~beta2-2) maar het is niet geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8~beta2-2) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd libxine1-ffmpeg: Depends: libavcodec-extra-53 (= 4:0.7.3-1) maar het is niet geïnstalleerd Depends: libavutil-extra-51 (= 4:0.7.3-1) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libc6 (= 2.4) maar 2.15-0ubuntu10 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.7.3-1) maar het is niet geïnstalleerd Depends: libxine1-bin (= 1.1.20-2build1) maar 1.1.20-2build1 is geïnstalleerd mencoder: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd mplayer: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd vlc: Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) maar 2.0.3-0ubuntu0.12.04.1 is geïnstalleerd Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libc6 (= 2.15) maar 2.15-0ubuntu10 is geïnstalleerd Depends: libfreetype6 (= 2.2.1) maar 2.4.8-1ubuntu2 is geïnstalleerd Depends: libgcc1 (= 1:4.1.1) maar 1:4.6.3-1ubuntu5 is geïnstalleerd Depends: libqtcore4 (= 4:4.8.0) maar 4:4.8.1-0ubuntu4.2 is geïnstalleerd Depends: libqtgui4 (= 4:4.7.0~beta1) maar 4:4.8.1-0ubuntu4.2 is geïnstalleerd Depends: libstdc++6 (= 4.6) maar 4.6.3-1ubuntu5 is geïnstalleerd Depends: zlib1g (= 1:1.2.3.3.dfsg) maar 1:1.2.3.4.dfsg-3ubuntu4 is geïnstalleerd vlc-nox: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libc6 (= 2.15) maar 2.15-0ubuntu10 is geïnstalleerd Depends: libfontconfig1 (= 2.8.0) maar 2.8.0-3ubuntu9.1 is geïnstalleerd Depends: libfreetype6 (= 2.2.1) maar 2.4.8-1ubuntu2 is geïnstalleerd Depends: libgcc1 (= 1:4.1.1) maar 1:4.6.3-1ubuntu5 is geïnstalleerd Depends: libgnutls26 (= 2.12.6.1-0) maar 2.12.14-5ubuntu3.1 is geïnstalleerd Depends: libmpcdec6 (= 1:0.1~r435) maar 2:0.1~r459-1ubuntu1 is geïnstalleerd Depends: libncursesw5 (= 5.6+20070908) maar 5.9-4 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libsmbclient (= 3.0.24) maar 2:3.6.3-2ubuntu2.3 is geïnstalleerd Depends: libstdc++6 (= 4.6) maar 4.6.3-1ubuntu5 is geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libudev0 (= 147) maar 175-0ubuntu9.1 is geïnstalleerd Depends: libxml2 (= 2.7.4) maar 2.7.8.dfsg-5.1ubuntu4.1 is geïnstalleerd Depends: zlib1g (= 1:1.2.0.2) maar 1:1.2.3.4.dfsg-3ubuntu4 is geïnstalleerd xbmc-bin: Depends: libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libavfilter-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavformat-extra-53 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libavutil-extra-51 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd Depends: libpostproc-extra-52 (= 4:0.8-1~) maar het is niet geïnstalleerd Depends: libswscale-extra-2 (= 4:0.8-1~) maar 6:0.10.4.0ubuntu0jon2.2 is geïnstalleerd And apt-get is reporting: root@LAPTOP:~# apt-get -f install Pakketlijsten worden ingelezen... Klaar Boom van vereisten wordt opgebouwd De status informatie wordt gelezen... Klaar Vereisten worden gecorrigeerd... mislukt. De volgende pakketten hebben niet-voldane vereisten: audacious-plugins : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd libavfilter-extra-2 : Vereisten: libavcodec-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar het is niet geïnstalleerd Vereisten: libavcodec-extra-53 (< 6:0.10.4.0ubuntu0jon2.2-99) maar het is niet geïnstalleerd libavformat-extra-53 : Vereisten: libavcodec-extra-53 (= 6:0.10.4.0ubuntu0jon2.2) maar het is niet geïnstalleerd Vereisten: libavcodec-extra-53 (< 6:0.10.4.0ubuntu0jon2.2-99) maar het is niet geïnstalleerd libk3b6-extracodecs : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd libquicktime2 : Vereisten: libavcodec53 (= 4:0.8~beta2-2) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8~beta2-2) maar het is niet geïnstalleerd libxine1-ffmpeg : Vereisten: libavcodec53 (= 4:0.7.3-1) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.7.3-1) maar het is niet geïnstalleerd mencoder : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd mplayer : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd vlc : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd vlc-nox : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd xbmc-bin : Vereisten: libavcodec53 (= 4:0.8-1~) maar het is niet geïnstalleerd of libavcodec-extra-53 (= 4:0.8-1~) maar het is niet geïnstalleerd E: Fout, pkgProblemResolver::Resolve maakte scheidingen aan, dit kan veroorzaakt worden door vastgehouden pakketten. E: Kan vereisten niet corrigeren How to proceed?? Thanks in advance, Michiel

  Read the article

• ASP.NET MVC 2 Mdel encapsulated within ViewModel Validation

  - by Program.X

  I am trying to get validation to work in ASP.NET MVC 2, but without much success. I have a complex class containing a large number of fields. (Don't ask - this is oneo f those real-world situations best practices can't touch) This would normally be my Model and is a LINQ-to-SQL generated class. Because this is generated code, I have created a MetaData class as per http://davidhayden.com/blog/dave/archive/2009/08/10/AspNetMvc20BuddyClassesMetadataType.aspx. public class ConsultantRegistrationMetadata { [DisplayName("Title")] [Required(ErrorMessage = "Title is required")] [StringLength(10, ErrorMessage = "Title cannot contain more than 10 characters")] string Title { get; set; } [Required(ErrorMessage = "Forename(s) is required")] [StringLength(128, ErrorMessage = "Forename(s) cannot contain more than 128 characters")] [DisplayName("Forename(s)")] string Forenames { get; set; } // ... I've attached this to the partial class of my generated class: [MetadataType(typeof(ConsultantRegistrationMetadata))] public partial class ConsultantRegistration { // ... Because my form is complex, it has a number of dependencies, such as SelectLists, etc. which I have encapsulated in a ViewModel pattern - and included the ConsultantRegistration model as a property: public class ConsultantRegistrationFormViewModel { public Data.ConsultantRegistration ConsultantRegistration { get; private set; } public SelectList Titles { get; private set; } public SelectList Countries { get; private set; } // ... So it is essentially ViewModel=Model My View then has: <p> <%: Html.LabelFor(model => model.ConsultantRegistration.Title) %> <%: Html.DropDownListFor(model => model.ConsultantRegistration.Title, Model.Titles,"(select a Title)") %> <%: Html.ValidationMessage("Title","*") %> </p> <p> <%: Html.LabelFor(model => model.ConsultantRegistration.Forenames) %> <%: Html.TextBoxFor(model => model.ConsultantRegistration.Forenames) %> <%: Html.ValidationMessageFor(model=>model.ConsultantRegistration.Forenames) %> </p> The problem is, the validation attributes on the metadata class are having no effect. I tried doing it via an Interface, but also no effect. I'm beginning to think that the reason is because I am encapsulating my model within a ViewModel. My Controller (Create Action) is as follows: [HttpPost] public ActionResult Create(Data.ConsultantRegistration consultantRegistration) { if (ModelState.IsValid) // this is always true - which is wrong!! { try { consultantRegistration = ConsultantRegistrationRepository.SaveConsultantRegistration(consultantRegistration); return RedirectToAction("Edit", new { id = consultantRegistration.ID, sectionIndex = 2 }); } catch (Exception ex) { ModelState.AddModelError("CreateException",ex); } } return View(new ConsultantRegistrationFormViewModel(consultantRegistration)); } As outlined in the comment, the ModelState.IsValid property always returns true, despite fields with the Validaiton annotations not being valid. (Forenames being a key example). Am I missing something obvious - considering I am an MVC newbie? I'm after the mechanism demoed by Jon Galloway at http://www.asp.net/learn/mvc-videos/video-10082.aspx. (Am aware t is similar to http://stackoverflow.com/questions/1260562/asp-net-mvc-model-viewmodel-validation but that post seems to talk about xVal. I have no idea what that is and suspect it is for MVC 1)

  Read the article

• ASP.NET MVC 2 Model encapsulated within ViewModel Validation

  - by Program.X

  I am trying to get validation to work in ASP.NET MVC 2, but without much success. I have a complex class containing a large number of fields. (Don't ask - this is oneo f those real-world situations best practices can't touch) This would normally be my Model and is a LINQ-to-SQL generated class. Because this is generated code, I have created a MetaData class as per http://davidhayden.com/blog/dave/archive/2009/08/10/AspNetMvc20BuddyClassesMetadataType.aspx. public class ConsultantRegistrationMetadata { [DisplayName("Title")] [Required(ErrorMessage = "Title is required")] [StringLength(10, ErrorMessage = "Title cannot contain more than 10 characters")] string Title { get; set; } [Required(ErrorMessage = "Forename(s) is required")] [StringLength(128, ErrorMessage = "Forename(s) cannot contain more than 128 characters")] [DisplayName("Forename(s)")] string Forenames { get; set; } // ... I've attached this to the partial class of my generated class: [MetadataType(typeof(ConsultantRegistrationMetadata))] public partial class ConsultantRegistration { // ... Because my form is complex, it has a number of dependencies, such as SelectLists, etc. which I have encapsulated in a ViewModel pattern - and included the ConsultantRegistration model as a property: public class ConsultantRegistrationFormViewModel { public Data.ConsultantRegistration ConsultantRegistration { get; private set; } public SelectList Titles { get; private set; } public SelectList Countries { get; private set; } // ... So it is essentially ViewModel=Model My View then has: <p> <%: Html.LabelFor(model => model.ConsultantRegistration.Title) %> <%: Html.DropDownListFor(model => model.ConsultantRegistration.Title, Model.Titles,"(select a Title)") %> <%: Html.ValidationMessage("Title","*") %> </p> <p> <%: Html.LabelFor(model => model.ConsultantRegistration.Forenames) %> <%: Html.TextBoxFor(model => model.ConsultantRegistration.Forenames) %> <%: Html.ValidationMessageFor(model=>model.ConsultantRegistration.Forenames) %> </p> The problem is, the validation attributes on the metadata class are having no effect. I tried doing it via an Interface, but also no effect. I'm beginning to think that the reason is because I am encapsulating my model within a ViewModel. My Controller (Create Action) is as follows: [HttpPost] public ActionResult Create(Data.ConsultantRegistration consultantRegistration) { if (ModelState.IsValid) // this is always true - which is wrong!! { try { consultantRegistration = ConsultantRegistrationRepository.SaveConsultantRegistration(consultantRegistration); return RedirectToAction("Edit", new { id = consultantRegistration.ID, sectionIndex = 2 }); } catch (Exception ex) { ModelState.AddModelError("CreateException",ex); } } return View(new ConsultantRegistrationFormViewModel(consultantRegistration)); } As outlined in the comment, the ModelState.IsValid property always returns true, despite fields with the Validaiton annotations not being valid. (Forenames being a key example). Am I missing something obvious - considering I am an MVC newbie? I'm after the mechanism demoed by Jon Galloway at http://www.asp.net/learn/mvc-videos/video-10082.aspx. (Am aware t is similar to http://stackoverflow.com/questions/1260562/asp-net-mvc-model-viewmodel-validation but that post seems to talk about xVal. I have no idea what that is and suspect it is for MVC 1)

  Read the article

• Grafting LINQ onto C# 2 library

  - by P Daddy

  I'm writing a data access layer. It will have C# 2 and C# 3 clients, so I'm compiling against the 2.0 framework. Although encouraging the use of stored procedures, I'm still trying to provide a fairly complete ability to perform ad-hoc queries. I have this working fairly well, already. For the convenience of C# 3 clients, I'm trying to provide as much compatibility with LINQ query syntax as I can. Jon Skeet noticed that LINQ query expressions are duck typed, so I don't have to have an IQueryable and IQueryProvider (or IEnumerable<T>) to use them. I just have to provide methods with the correct signatures. So I got Select, Where, OrderBy, OrderByDescending, ThenBy, and ThenByDescending working. Where I need help are with Join and GroupJoin. I've got them working, but only for one join. A brief compilable example of what I have is this: // .NET 2.0 doesn't define the Func<...> delegates, so let's define some workalikes delegate TResult FakeFunc<T, TResult>(T arg); delegate TResult FakeFunc<T1, T2, TResult>(T1 arg1, T2 arg2); abstract class Projection{ public static Condition operator==(Projection a, Projection b){ return new EqualsCondition(a, b); } public static Condition operator!=(Projection a, Projection b){ throw new NotImplementedException(); } } class ColumnProjection : Projection{ readonly Table table; readonly string columnName; public ColumnProjection(Table table, string columnName){ this.table = table; this.columnName = columnName; } } abstract class Condition{} class EqualsCondition : Condition{ readonly Projection a; readonly Projection b; public EqualsCondition(Projection a, Projection b){ this.a = a; this.b = b; } } class TableView{ readonly Table table; readonly Projection[] projections; public TableView(Table table, Projection[] projections){ this.table = table; this.projections = projections; } } class Table{ public Projection this[string columnName]{ get{return new ColumnProjection(this, columnName);} } public TableView Select(params Projection[] projections){ return new TableView(this, projections); } public TableView Select(FakeFunc<Table, Projection[]> projections){ return new TableView(this, projections(this)); } public Table Join(Table other, Condition condition){ return new JoinedTable(this, other, condition); } public TableView Join(Table inner, FakeFunc<Table, Projection> outerKeySelector, FakeFunc<Table, Projection> innerKeySelector, FakeFunc<Table, Table, Projection[]> resultSelector){ Table join = new JoinedTable(this, inner, new EqualsCondition(outerKeySelector(this), innerKeySelector(inner))); return join.Select(resultSelector(this, inner)); } } class JoinedTable : Table{ readonly Table left; readonly Table right; readonly Condition condition; public JoinedTable(Table left, Table right, Condition condition){ this.left = left; this.right = right; this.condition = condition; } } This allows me to use a fairly decent syntax in C# 2: Table table1 = new Table(); Table table2 = new Table(); TableView result = table1 .Join(table2, table1["ID"] == table2["ID"]) .Select(table1["ID"], table2["Description"]); But an even nicer syntax in C# 3: TableView result = from t1 in table1 join t2 in table2 on t1["ID"] equals t2["ID"] select new[]{t1["ID"], t2["Description"]}; This works well and gives me identical results to the first case. The problem is if I want to join in a third table. TableView result = from t1 in table1 join t2 in table2 on t1["ID"] equals t2["ID"] join t3 in table3 on t1["ID"] equals t3["ID"] select new[]{t1["ID"], t2["Description"], t3["Foo"]}; Now I get an error (Cannot implicitly convert type 'AnonymousType#1' to 'Projection[]'), presumably because the second join is trying to join the third table to an anonymous type containing the first two tables. This anonymous type, of course, doesn't have a Join method. Any hints on how I can do this?

  Read the article

• Time Warp

  - by Jesse

  It’s no secret that daylight savings time can wreak havoc on systems that rely heavily on dates. The system I work on is centered around recording dates and times, so naturally my co-workers and I have seen our fair share of date-related bugs. From time to time, however, we come across something that we haven’t seen before. A few weeks ago the following error message started showing up in our logs: “The supplied DateTime represents an invalid time. For example, when the clock is adjusted forward, any time in the period that is skipped is invalid.” This seemed very cryptic, especially since it was coming from areas of our application that are typically only concerned with capturing date-only (no explicit time component) from the user, like reports that take a “start date” and “end date” parameter. For these types of parameters we just leave off the time component when capturing the date values, so midnight is used as a “placeholder” time. How is midnight an “invalid time”? Globalization Is Hard Over the last couple of years our software has been rolled out to users in several countries outside of the United States, including Brazil. Brazil begins and ends daylight savings time at midnight on pre-determined days of the year. On October 16, 2011 at midnight many areas in Brazil began observing daylight savings time at which time their clocks were set forward one hour. This means that at the instant it became midnight on October 16, it actually became 1:00 AM, so any time between 12:00 AM and 12:59:59 AM never actually happened. Because we store all date values in the database in UTC, always adjust any “local” dates provided by a user to UTC before using them as filters in a query. The error we saw was thrown by .NET when trying to convert the Brazilian local time of 2011-10-16 12:00 AM to UTC since that local time never actually existed. We hadn’t experienced this same issue with any of our US customers because the daylight savings time changes in the US occur at 2:00 AM which doesn’t conflict with our “placeholder” time of midnight. Detecting Invalid Times In .NET you might use code similar to the following for converting a local time to UTC: var localDate = new DateTime(2011, 10, 16); //2011-10-16 @ midnight const string timeZoneId = "E. South America Standard Time"; //Windows system timezone Id for "Brasilia" timezone. var localTimeZone = TimeZoneInfo.FindSystemTimeZoneById(timeZoneId); var convertedDate = TimeZoneInfo.ConvertTimeToUtc(localDate, localTimeZone); The code above throws the “invalid time” exception referenced above. We could try to detect whether or not the local time is invalid with something like this: var localDate = new DateTime(2011, 10, 16); //2011-10-16 @ midnight const string timeZoneId = "E. South America Standard Time"; //Windows system timezone Id for "Brasilia" timezone. var localTimeZone = TimeZoneInfo.FindSystemTimeZoneById(timeZoneId); if (localTimeZone.IsInvalidTime(localDate)) localDate = localDate.AddHours(1); var convertedDate = TimeZoneInfo.ConvertTimeToUtc(localDate, localTimeZone); This code works in this particular scenario, but it hardly seems robust. It also does nothing to address the issue that can arise when dealing with the ambiguous times that fall around the end of daylight savings. When we roll the clocks back an hour they record the same hour on the same day twice in a row. To continue on with our Brazil example, on February 19, 2012 at 12:00 AM, it will immediately become February 18, 2012 at 11:00 PM all over again. In this scenario, how should we interpret February 18, 2011 11:30 PM? Enter Noda Time I heard about Noda Time, the .NET port of the Java library Joda Time, a little while back and filed it away in the back of my mind under the “sounds-like-it-might-be-useful-someday” category.  Let’s see how we might deal with the issue of invalid and ambiguous local times using Noda Time (note that as of this writing the samples below will only work using the latest code available from the Noda Time repo on Google Code. The NuGet package version 0.1.0 published 2011-08-19 will incorrectly report unambiguous times as being ambiguous) : var localDateTime = new LocalDateTime(2011, 10, 16, 0, 0); const string timeZoneId = "Brazil/East"; var timezone = DateTimeZone.ForId(timeZoneId); var localDateTimeMaping = timezone.MapLocalDateTime(localDateTime); ZonedDateTime unambiguousLocalDateTime; switch (localDateTimeMaping.Type) { case ZoneLocalMapping.ResultType.Unambiguous: unambiguousLocalDateTime = localDateTimeMaping.UnambiguousMapping; break; case ZoneLocalMapping.ResultType.Ambiguous: unambiguousLocalDateTime = localDateTimeMaping.EarlierMapping; break; case ZoneLocalMapping.ResultType.Skipped: unambiguousLocalDateTime = new ZonedDateTime( localDateTimeMaping.ZoneIntervalAfterTransition.Start, timezone); break; default: throw new InvalidOperationException(string.Format("Unexpected mapping result type: {0}", localDateTimeMaping.Type)); } var convertedDateTime = unambiguousLocalDateTime.ToInstant().ToDateTimeUtc(); Let’s break this sample down: I’m using the Noda Time ‘LocalDateTime’ object to represent the local date and time. I’ve provided the year, month, day, hour, and minute (zeros for the hour and minute here represent midnight). You can think of a ‘LocalDateTime’ as an “invalidated” date and time; there is no information available about the time zone that this date and time belong to, so Noda Time can’t make any guarantees about its ambiguity. The ‘timeZoneId’ in this sample is different than the ones above. In order to use the .NET TimeZoneInfo class we need to provide Windows time zone ids. Noda Time expects an Olson (tz / zoneinfo) time zone identifier and does not currently offer any means of mapping the Windows time zones to their Olson counterparts, though project owner Jon Skeet has said that some sort of mapping will be publicly accessible at some point in the future. I’m making use of the Noda Time ‘DateTimeZone.MapLocalDateTime’ method to disambiguate the original local date time value. This method returns an instance of the Noda Time object ‘ZoneLocalMapping’ containing information about the provided local date time maps to the provided time zone.  The disambiguated local date and time value will be stored in the ‘unambiguousLocalDateTime’ variable as an instance of the Noda Time ‘ZonedDateTime’ object. An instance of this object represents a completely unambiguous point in time and is comprised of a local date and time, a time zone, and an offset from UTC. Instances of ZonedDateTime can only be created from within the Noda Time assembly (the constructor is ‘internal’) to ensure to callers that each instance represents an unambiguous point in time. The value of the ‘unambiguousLocalDateTime’ might vary depending upon the ‘ResultType’ returned by the ‘MapLocalDateTime’ method. There are three possible outcomes: If the provided local date time is unambiguous in the provided time zone I can immediately set the ‘unambiguousLocalDateTime’ variable from the ‘Unambiguous Mapping’ property of the mapping returned by the ‘MapLocalDateTime’ method. If the provided local date time is ambiguous in the provided time zone (i.e. it falls in an hour that was repeated when moving clocks backward from Daylight Savings to Standard Time), I can use the ‘EarlierMapping’ property to get the earlier of the two possible local dates to define the unambiguous local date and time that I need. I could have also opted to use the ‘LaterMapping’ property in this case, or even returned an error and asked the user to specify the proper choice. The important thing to note here is that as the programmer I’ve been forced to deal with what appears to be an ambiguous date and time. If the provided local date time represents a skipped time (i.e. it falls in an hour that was skipped when moving clocks forward from Standard Time to Daylight Savings Time),  I have access to the time intervals that fell immediately before and immediately after the point in time that caused my date to be skipped. In this case I have opted to disambiguate my local date and time by moving it forward to the beginning of the interval immediately following the skipped period. Again, I could opt to use the end of the interval immediately preceding the skipped period, or raise an error depending on the needs of the application. The point of this code is to convert a local date and time to a UTC date and time for use in a SQL Server database, so the final ‘convertedDate’  variable (typed as a plain old .NET DateTime) has its value set from a Noda Time ‘Instant’. An 'Instant’ represents a number of ticks since 1970-01-01 at midnight (Unix epoch) and can easily be converted to a .NET DateTime in the UTC time zone using the ‘ToDateTimeUtc()’ method. This sample is admittedly contrived and could certainly use some refactoring, but I think it captures the general approach needed to take a local date and time and convert it to UTC with Noda Time. At first glance it might seem that Noda Time makes this “simple” code more complicated and verbose because it forces you to explicitly deal with the local date disambiguation, but I feel that the length and complexity of the Noda Time sample is proportionate to the complexity of the problem. Using TimeZoneInfo leaves you susceptible to overlooking ambiguous and skipped times that could result in run-time errors or (even worse) run-time data corruption in the form of a local date and time being adjusted to UTC incorrectly. I should point out that this research is my first look at Noda Time and I know that I’ve only scratched the surface of its full capabilities. I also think it’s safe to say that it’s still beta software for the time being so I’m not rushing out to use it production systems just yet, but I will definitely be tinkering with it more and keeping an eye on it as it progresses.

  Read the article

• CodePlex Daily Summary for Friday, March 19, 2010

  CodePlex Daily Summary for Friday, March 19, 2010New Projects[Tool] Vczh Visual Studio UnitTest Coverage Analyzer: Analyzing Visual Studio Unittest Coverage Exported XML filecrudwork is a library of reuseable classes for developing .NET applications: crudwork is a collection of reuseable .NET classes and features. If you searched for StpLibrary and landed here, you're in the right place. Origi...CWU Animated AVL Tree Tutorial: This is a silverlight demo of a self-balancing AVL tree. On the original team were CWU undergraduates Eric Brown, Barend Venter, Nick Rushton, Arry...DotNetNuke® Skin Modern: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by Salar Golestanian of SalarO. The skin utilizes both the telerik...DotNetNuke® Skin Monster: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Jon Edwards of SlumtownHero.co.za. This package uses totally tab...DotNetNuke® Skin Synapse: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Exionyte Solutions. This package features 2 colors with 4...earthworm: Earthworm is a pet project intended as a repository of data access logic, including some ORM, state management and bridging the gap between connect...ema: EMA is a place for collaborative effort to implement a PowerGrid game engine. For more info on PowerGrid the board game see: http://www.boardgamege...Extended SharePoint Web Parts: Extending capabilities of existing SharePoint 2007 Web Parts by inheriting and alterFreedomCraft: Craft development siteG.B SecondLife Sculpter: This is a Sculptor for "secondlife"InfoPath Error Viewer: InfoPath Error Viewer provides an intuitive list to show all errors in the entire InfoPath form. You'll no longer have to find the validation error...LEET (LEET Enhances Exploratory Testing): LEET is a capture-replay tool based on Microsoft’s User Interface Automation Framework. It is targeted at agile teams, and provides support for us...Linq To Entity: Linq,Linq to Entity,EntityMACFBTest: This is a test for a Facebook application.MetaProperties: MetaProperties helps you to create event driven architectures in .NET. It saves you time and it helps you avoid mistakes. It's compatible with WPF ...ownztec web: projeto da ownztec.comParallel Programming Guide: Content for the latest patterns & practices book on design patterns for parallel programming. Downloadable book outline and draft chapters as well ...Perseus - Sistema de Matrícula On-Line: Sistema de matrícula desenvolvido pelo 5º período de Desenvolvimento Web da FACECLA.Project Tru Tiên: Project EL tru tiên, ZhuxianProSysPlus.Net Framework: How do I get the ease and efficiency of my work in VFP (R.I.P. 2010)? The answer is here: the ProSysPlus.Net Framework. Why is it open source? Wh...Quick Anime Renamer: Originally included with AniPlayer X, Quick Anime Renamer easily renames your anime files into a "cleaner" format so you wont get retinal detachment.Simple XNA Button: This is a project of a helper for instancing Simple Buttons in XNA with a ButtonPanel. Its got various features like. Load a Panel from a Plain Tex...SteelVersion - Monitor your .NET Application versioning: SteelVersion helps you to find and store versioning information about .NET assemblies ("Explorer" mode). It also makes it easier to continuously ch...Stellar Results: Astronomical Tracking System for IUPUI CSCI506 - Fall 2007, Team2TheHunterGetsTheDeer: first AIwandal: wandalWeb App Data Architect's CodeCAN: Contains different types of code samples to explore different types of technical solutions/patterns from an architect's point of view.Yet Another GPS: Yet another GPS tracker is a very powerful GPS track application for Windows MobileNew ReleasesASP.Net Client Dependency Framework: v1.0 RC1: ASP.Net Client Dependency has progressed to release candidate 1. With the community feedback and bug reports we've been able to make some great upd...C# FTP Library: FTPLib v1.0.1.1: This release has a couple of small bug fixes as well as the new abilities to specify a port to connect to and to create a new directory with the Cr...crudwork is a library of reuseable classes for developing .NET applications: crudwork 2.2.0.1: crudwork 2.2.0.1 (initial version)DotNetNuke® Skin Modern: Modern Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by Salar Golestanian of SalarO. The skin utilizes both the telerik...DotNetNuke® Skinning Extensions: Nav Menu Demo Skins: This very basic skin demonstrates: 1. How to force NAV menu to generate an unordered list menu 2. The creation of a sub menu, both horizontal and ...DotNetNuke® XML: 04.03.05: XML/XSL Module 04.03.05 Release Candidate This is a maintainace release. Full Quallified Namespace avoids conflicts with Namespaces used by Teler...eCommerce by Onex Community Edition: Installer of eCommerce by Onex Community 1.0: Installer of eCommerce by Onex Community 1.0 Last changes: Added integration with Paypal Corrected of adding photos and attachments to products ...eCommerce by Onex Community Edition: Source code of eCommerce by Onex Community 1.0: Changes in version 1.0: Added integration with Paypal Corrected of adding photos and attachments to products Fixed problem with cancellation of...Employee Info Starter Kit: v2.2.0 (Visual Studio 2005-2008): This is a starter kit, which includes very simple user requirements, where we can create, read, update and delete (CRUD) the employee info of a com...Employee Info Starter Kit: v4.0.0.alpha (Visual Studio 2010): Employee Info Starter Kit is a ASP.NET based web application, which includes very simple user requirements, where we can create, read, update and d...Encrypted Notes: Encrypted Notes 1.4: This is the latest version of Encrypted Notes (1.4). It has an installer - it will create a directory 'CPascoe' in My Documents. Once you have ext...Extended SharePoint Web Parts: ContentQueryAdvanced: This .wsp file contains a single web part ContentQueryAdvanced. This web part inherits from ContentQuery web part and adds a ToolPart field for a ...Extended SharePoint Web Parts: Source Code: Zip file includes all the source code used to extend Content Query Web Part, adding a Tool Part field to insert a CAML query/filter/sortFacebook Developer Toolkit: Version 3.02: Updated copyright. No new functionality. Version 3.1 in the works.fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 (final): fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclient: you can use it to test the install...InfoPath Error Viewer: InfoPath Error Viewer 1.0: This is an intial version of this tool. You can: 1. View all errors in a list. 2. Locate to a binding control of an error field. 3. See the detai...LEET (LEET Enhances Exploratory Testing): LEET Alpha: The first public release of LEET includes the ability to record tests from running GUIs, assist in writing tests manually from a running GUI, edit ...Linq To Entity: Linq to Entity: The Entity Framework enables developers to work with data in the form of domain-specific objects and properties, such as customers and customer add...MDownloader: MDownloader-0.15.8.56699: Fixed peformance and memory usage. Fixed Letitbit provider. Added detecting IMDB, NFO, TV.com... links in RSS Monitor. Supported password len...MetaProperties: MetaProperties 1.0.0.0: This is a multi-targeted release of MetaProperties for the desktop and Silverlight versions of the .NET framework. The desktop version is fully ...Nito.KitchenSink: Version 2: Added a cancelable Stream.CopyTo. Depends on Nito.Linq 0.2. Please report any issues via the Issue Tracker.Project Server 2007 Timesheet AutoStatus Plus: AutoStatusPlus 1.0.1.0: AutoStatusPlus 1.0.1.0 Supported Systems x86 and x64 Project Server 2007 deployments with or without MOSS 2007 Recommended Patchlevels WSS 3.0: ...Project Tru Tiên: Elements-test V1: Mô tả Bản elements.data - có full ID của bản Elemens.data Tru tiên 2 VIệt Nam (V37) - có full ID của bản Elements.data server offline tru tiên (hiệ...Quick Anime Renamer: Quick Anime Renamer v0.1: AniPlayer X v1.4.5 - started 3/18/2010Initial Release!QuickieB2B: Quickie v1.0b: QuickieB2B - made for DEV4FUN competition organized by Microsoft CroatiaSilverlight 3.0 Advanced ToolTipService: Advanced ToolTipService v2.0.2: This release is compiled against the Silverlight 3.0 runtime. A demonstration on how to set the ToolTip content to a property of the DataContext o...Simple XNA Button: XNA Button 1.0: The Main Project. this uses XNA 3.0 but it can be build with lower versions of XNA Framework. This was made using Visual Studio 2008.StoryQ: StoryQ 2.0.3 Library and Converter UI: New features in this release: Tagging and a tag-capable rich html report. The code generator is capable of generating entire classes This relea...The Silverlight Hyper Video Player [http://slhvp.com]: Version 1.0: Version 1.0VCC: Latest build, v2.1.30318.0: Automatic drop of latest buildWord Index extracts words or sentences from Word document according to patterns: Word Index 1.0.1.0 (For Word 2007 and Word 2003): Word Index for Word 2007 & 2003 : WordIndex.msi (Win-Installer Setup for Word Index) Source code : wordindex.codeplex.comV1.0.1.0.zip : (Source co...Yet Another GPS: YAGPS-Alfa.1: Yet another GPS tracker is a very powerful GPS track application for Windows MobileMost Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPjQuery Library for SharePoint Web ServicesDirectQOpen Data App Framework (ODAF)patterns & practices – Enterprise LibraryBlogEngine.NETPHPExcelNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• Your Day-by-Day Guide to Agile PLM at Oracle OpenWorld 2012

  - by Kerrie Foy

  This year’s Oracle OpenWorld conference is nearly here, and we’re all excited about what we have planned! With five days of activities and customer presenters from market leaders and top innovators like The Coca-Cola Company, Starbucks, JDSU, Facebook, GlobalFoundries, and more, this is an event you don't want to miss. I've compiled this day-by-day guide to help anyone keep track of all the “Product Lifecycle Management and Product Value Chain” sessions and activities at OpenWorld 2012, September 30 – October 4 in San Francisco, California.  Monday, October 1 There are great networking activities on Sunday September 30, but PLM specific sessions start after general conference keynotes on Monday, October 1 at 10:45 a.m. at the InterContinental Hotel in room Telegraph Hill. In fact, most of our sessions this year will be held in this room, which is still close to the conference keynotes in Moscone, but just far enough away to allow some focused networking and discussions.   This first session, 10:45 – 11:45 a.m. is a joint session with the Agile and AutoVue teams, entitled “Streamline PLM Design-to-Manufacturing Processes with AutoVue Visualization Soltuions” featuring presenters from Oracle as well as joint AutoVue and Agile PLM customer GlobalFoundries. In the following 12:15 – 1:15 p.m. slot, there are two sessions to choose from, so if you have a team of representatives attending OpenWorld, you may consider splitting up to catch both of these: a) Our General Session will be held in the InterContinental Hotel Ballroom C, which will cover our complete enterprise PLM strategy, product updates, and roadmaps. It’s our pleasure to feature a customer keynote presentation from Chris Bedi, CIO, and Rajeev Sethi, Director IT Business Engagement, of JDSU. b) A focused session on integrating PLM with Engineering and Supply Chain Systems will be held on the second floor of Moscone West (next to the InterContinental) in room 2022. Join to discover how these types of integrations help companies manage common and integrated design information across all MCAD, ECAD, and software components. After a lunch break and perhaps a visit to the Demogrounds in Moscone West, select from two product roadmap sessions in the next time slot (3:15 – 4:15 p.m.): an Agile 9.3.x session located in the InterContinental’s Ballroom C, and an Agile PLM for Process session located back in the InterContinental’s Telegraph Room. Both sessions will have strong content around each product line’s latest releases, vision, and customer examples. We are very pleased to feature Daniel Soosai of Facebook in the A9 session and Vinnie D’Agostino of The Coca-Cola Company in the PLM for Process session. Afterwards, hang in there for one last session of the day from 4:45 – 5:45 p.m.; it’s an insightful discussion on leveraging Agile PLM as the Foundation for Enterprise Quality Management, and it’s sure to be one of the best. In the Telegraph Room, this session will feature Oracle experts, partner co-presenter David Bartlett from CPG Solutions, and customer co-presenter Thomas Crowe, CIO of PL Developments. Hear their experience around implementing collaborative, integrated solutions to ensure effective knowledge transfer throughout an organization, and how to perform analysis in real time to resolve product quality issues swiftly and efficiently. On Monday evening there will be plenty of industry, product, and partner dinners, so take advantage of all the networking opportunities and catch some great tunes at the 5 day Oracle OpenWorld Music Festival! Tuesday, October 2 Tuesday starts early with a special PLM Networking Brunch, sponsored by several partners, from 8:30 a.m. – 10:30 a.m. at the B Restaurant that sits atop Yerba Buena Gardens. You’ll have the unique opportunity to meet with like-minded industry peers and a PLM partner to discuss a topic of your choosing while enjoying a delicious meal. Registration is required, so to inquire about attending this brunch, please email Terri.Hiskey-AT-oracle.com. After wrapping up your conversations over brunch, head over to the Marriott Marquis in the Nob Hill CD room for a chance to experience the Oracle Product Lifecycle Analytics solution in a Hands-On Lab, open from 10:15 a.m. – 12:45 p.m. Experts will be there to answer your questions. Back in the InterContinental Hotel’s Telegraph room, the session on “Ideation and Requirements Management: Capturing the Voice of the Customer” begins at 11:45 a.m. – 12:45 p.m. This may be the session for you if you’re struggling with challenges like too many repositories of customer needs, requests, and ideas; limited visibility into which ideas are being advanced by customers and field resources; or if you’re unable to leverage internal expertise to expose effort and potential risks. This session will discuss how Agile PLM can help you overcome ideation challenges to deliver the right products to their targeted markets and fulfill customer desires. Next, from 1:15 – 2:15 p.m. join us for a session on Managing Profitable Innovation with Oracle Product Lifecycle Analytics. If you missed the Hands-on Lab, have more questions, or simply want to be inspired by the product’s forward-thinking vision and capabilities, this is a great opportunity to meet the progressive-minded executives behind the application. After this session, it may be a good opportunity to swing by the Demogrounds in Moscone West and visit the Agile PLM demos at exhibit booths #81 for Agile PLM for Discrete Manufacturing, #70 for Agile PLM for Process, and #82 for AutoVue and Agile PLM Enterprise Visualization. Check out the related Supply Chain Management booths close by if you’re interested - here's the map. There’s always lots to see and do around the exhibit area. But don’t forget the last session of the day from 5:00 p.m. – 6:00 p.m. in Telegraph Hill on Managing Product Innovation and Compliance in Life Science Companies, a “must-see” if you’re in this industry. Launching innovative products quickly is already a high-stakes challenge, but companies in the life sciences industry face uniquely severe consequences when new products don’t perform or comply as required. In recent years, more and more regulations have become mandatory, and new ones, such as REACH, are currently going into effect for several companies. Customer presenters from pharmaceutical leader Eli Lilly will share how they’ve leveraged Agile PLM to deliver high-quality, innovative products in a fast-paced, heavily regulated market environment. Tuesday evening unwind at the Supply Chain Management Reception from 6:00 – 8:00 p.m. at the premier boutique Roe Nightclub and Lounge, which is located about three blocks down on Howard Street (on the other side of Moscone from the InterContinental Hotel). Registration is required. Click here for the details.   Wednesday, October 3 We have another full line-up on Wednesday, so be ready for an action-packed day. We start with a session at 10:15 – 11:15 a.m. in the Telegraph Room where we have a session on “PLM for Consumer Products: Building an Engine for Quality and Innovation” with featured presenters from Starbucks and partner Kalypso. This is a rare opportunity to learn directly from Starbucks how they instill quality and innovation throughout their organization, products, and processes, leveraging PLM disciplines with strong support from their partner.  If you’re not in the consumer products industry, we recommend attending another session at 10:15 – 11:15 a.m. in Moscone West room 3005: “Eco-Enterprise Innovation Awards and the Business Case for Sustainability” featuring Jeff Henley, Oracle’s Chairman of the Board and Jon Chorley, Chief Sustainability Officer. Oracle will honor select customers with Oracle’s Eco-Enterprise Innovation award, which recognizes customers and their respective partners who rely on Oracle products to support their green business practices to reduce their environmental impact while improving business efficiencies and reducing costs. The awards presentation is followed by a panel discussion with customers and Oracle executives, who describe how these award-winning organizations are embracing environmental initiatives as a central part of their business strategy and how information technology plays a pivotal role. Next at 11:45 a.m. – 12:45 p.m. in Telegraph Hill attend our session devoted to exploring Product Lifecycle Management’s role in Software Lifecycle Management. This is a thought leadership session with Oracle experts in the field on the importance of change management, and we’ll discuss how Oracle has for years leveraged Agile PLM to develop Agile PLM. If software lifecycle management doesn’t apply to your business or you’d rather engage in some lively one-on-one discussions, we also have a “Supply Chain Meet the Experts” session in Moscone West Room 2001A. Product experts, thought leaders and executives will be on hand to discuss your questions/topics, so come prepared. This session tends to fill up fast so try to get in early. At 1:15 – 2:15 p.m. join us back in Telegraph Hill for a session focused on leveraging the Agile Product Portfolio Management application as the Product Development Master Schedule to improve efficiencies, optimize resources, and gain visibility across projects enterprise-wide to improve portfolio profitability. Customer presenters from Broadcom will explain how they’ve leveraged the product to enable a master schedule with enterprise-level, phase-gate program and project collaboration and resource optimization. Again in Telegraph Hill from 3:30 – 4:30 p.m. we have an interesting session with leading semiconductor customer LSI and partner Kalypso on how LSI leveraged Agile PLM to advance from homegrown applications to complete Product Value Chain Management. That type of transition can be challenging, and LSI details how they were able to achieve their goals and the value they gained along the journey – a fascinating account for any company interested in leveraging best practices to innovate their business processes and even end products. Lastly, we’ll wrap up in Telegraph Hill from 5:00 – 6:00 p.m. with a session on “Ensuring New Product Success by Achieving Excellence in New Product Introduction.” This is a cross-industry session, guaranteed to deliver insight in the often elusive practice of creating winning products, and we’re very excited about. According to IDC Manufacturing Insights analyst Joe Barkai, “Product Failures are not necessarily a result of bad ideas…they are a result of suboptimal decisions.” We’ll show you how to wire your business processes to enhance decision-making and maximize product potential. Now, quickly hit your hotel room to freshen up and then catch one of the many complimentary shuttles to the much-anticipated Oracle Customer Appreciation Event on Treasure Island. We have a very exciting show planned – check out what’s in store here. Thursday, October 4 PLM has a light schedule on Thursday this year with just one session, but this again is one of our best sessions on managing the Product Value Chain: at 11:15 a.m – 12:15 p.m.in Telegraph Hill, it’s a customer and partner driven session with Sonoco Products and Deloitte telling their story about how to achieve integrated change control by interfacing Agile PLM with Oracle E-Business Suite. Sonoco Products, a global manufacturer of consumer and industrial packaging materials, with its systems integrator, Deloitte, is doing this by implementing prebuilt integration (Oracle Design-to-Release Integration Pack for Agile Product Lifecycle Management for Process and Oracle Process) to integrate Agile with Oracle Product Hub/Oracle Product Information Management and Oracle E-Business Suite. This session presents a case study of how Sonoco is leveraging this solution to improve data quality and build a framework for stronger master data governance. Even though that ends our PLM line-up at OpenWorld, there will still be many sessions and activities at the conference, so visit the Oracle OpenWorld website to review agendas and build your schedule. And of course, download and bring this guide and the latest version of the Agile PLM Focus-On Document (available soon!). San Francisco is a wonderful city to explore, and we’re glad you’re considering joining the Agile PLM team at Oracle OpenWorld!  I hope to see you there! Follow me before the conference and on site for real-time updates about #OOW12 on Twitter @Kerrie_Foy or @AgilePLM.

  Read the article

• Imperative vs. LINQ Performance on WP7

  - by Bil Simser

  Jesse Liberty had a nice post presenting the concepts around imperative, LINQ and fluent programming to populate a listbox. Check out the post as it’s a great example of some foundational things every .NET programmer should know. I was more interested in what the IL code that would be generated from imperative vs. LINQ was like and what the performance numbers are and how they differ. The code at the instruction level is interesting but not surprising. The imperative example with it’s creating lists and loops weighs in at about 60 instructions. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: .method private hidebysig instance void ImperativeMethod() cil managed 2: { 3: .maxstack 3 4: .locals init ( 5: [0] class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> someData, 6: [1] class [mscorlib]System.Collections.Generic.List`1<int32> inLoop, 7: [2] int32 n, 8: [3] class [mscorlib]System.Collections.Generic.IEnumerator`1<int32> CS$5$0000, 9: [4] bool CS$4$0001) 10: L_0000: nop 11: L_0001: ldc.i4.1 12: L_0002: ldc.i4.s 50 13: L_0004: call class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> [System.Core]System.Linq.Enumerable::Range(int32, int32) 14: L_0009: stloc.0 15: L_000a: newobj instance void [mscorlib]System.Collections.Generic.List`1<int32>::.ctor() 16: L_000f: stloc.1 17: L_0010: nop 18: L_0011: ldloc.0 19: L_0012: callvirt instance class [mscorlib]System.Collections.Generic.IEnumerator`1<!0> [mscorlib]System.Collections.Generic.IEnumerable`1<int32>::GetEnumerator() 20: L_0017: stloc.3 21: L_0018: br.s L_003a 22: L_001a: ldloc.3 23: L_001b: callvirt instance !0 [mscorlib]System.Collections.Generic.IEnumerator`1<int32>::get_Current() 24: L_0020: stloc.2 25: L_0021: nop 26: L_0022: ldloc.2 27: L_0023: ldc.i4.5 28: L_0024: cgt 29: L_0026: ldc.i4.0 30: L_0027: ceq 31: L_0029: stloc.s CS$4$0001 32: L_002b: ldloc.s CS$4$0001 33: L_002d: brtrue.s L_0039 34: L_002f: ldloc.1 35: L_0030: ldloc.2 36: L_0031: ldloc.2 37: L_0032: mul 38: L_0033: callvirt instance void [mscorlib]System.Collections.Generic.List`1<int32>::Add(!0) 39: L_0038: nop 40: L_0039: nop 41: L_003a: ldloc.3 42: L_003b: callvirt instance bool [mscorlib]System.Collections.IEnumerator::MoveNext() 43: L_0040: stloc.s CS$4$0001 44: L_0042: ldloc.s CS$4$0001 45: L_0044: brtrue.s L_001a 46: L_0046: leave.s L_005a 47: L_0048: ldloc.3 48: L_0049: ldnull 49: L_004a: ceq 50: L_004c: stloc.s CS$4$0001 51: L_004e: ldloc.s CS$4$0001 52: L_0050: brtrue.s L_0059 53: L_0052: ldloc.3 54: L_0053: callvirt instance void [mscorlib]System.IDisposable::Dispose() 55: L_0058: nop 56: L_0059: endfinally 57: L_005a: nop 58: L_005b: ldarg.0 59: L_005c: ldfld class [System.Windows]System.Windows.Controls.ListBox PerfTest.MainPage::LB1 60: L_0061: ldloc.1 61: L_0062: callvirt instance void [System.Windows]System.Windows.Controls.ItemsControl::set_ItemsSource(class [mscorlib]System.Collections.IEnumerable) 62: L_0067: nop 63: L_0068: ret 64: .try L_0018 to L_0048 finally handler L_0048 to L_005a 65: } 66:   67: Compare that to the IL generated for the LINQ version which has about half of the instructions and just gets the job done, no fluff. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: .method private hidebysig instance void LINQMethod() cil managed 2: { 3: .maxstack 4 4: .locals init ( 5: [0] class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> someData, 6: [1] class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> queryResult) 7: L_0000: nop 8: L_0001: ldc.i4.1 9: L_0002: ldc.i4.s 50 10: L_0004: call class [mscorlib]System.Collections.Generic.IEnumerable`1<int32> [System.Core]System.Linq.Enumerable::Range(int32, int32) 11: L_0009: stloc.0 12: L_000a: ldloc.0 13: L_000b: ldsfld class [System.Core]System.Func`2<int32, bool> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate6 14: L_0010: brtrue.s L_0025 15: L_0012: ldnull 16: L_0013: ldftn bool PerfTest.MainPage::<LINQProgramming>b__4(int32) 17: L_0019: newobj instance void [System.Core]System.Func`2<int32, bool>::.ctor(object, native int) 18: L_001e: stsfld class [System.Core]System.Func`2<int32, bool> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate6 19: L_0023: br.s L_0025 20: L_0025: ldsfld class [System.Core]System.Func`2<int32, bool> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate6 21: L_002a: call class [mscorlib]System.Collections.Generic.IEnumerable`1<!!0> [System.Core]System.Linq.Enumerable::Where<int32>(class [mscorlib]System.Collections.Generic.IEnumerable`1<!!0>, class [System.Core]System.Func`2<!!0, bool>) 22: L_002f: ldsfld class [System.Core]System.Func`2<int32, int32> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate7 23: L_0034: brtrue.s L_0049 24: L_0036: ldnull 25: L_0037: ldftn int32 PerfTest.MainPage::<LINQProgramming>b__5(int32) 26: L_003d: newobj instance void [System.Core]System.Func`2<int32, int32>::.ctor(object, native int) 27: L_0042: stsfld class [System.Core]System.Func`2<int32, int32> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate7 28: L_0047: br.s L_0049 29: L_0049: ldsfld class [System.Core]System.Func`2<int32, int32> PerfTest.MainPage::CS$<>9__CachedAnonymousMethodDelegate7 30: L_004e: call class [mscorlib]System.Collections.Generic.IEnumerable`1<!!1> [System.Core]System.Linq.Enumerable::Select<int32, int32>(class [mscorlib]System.Collections.Generic.IEnumerable`1<!!0>, class [System.Core]System.Func`2<!!0, !!1>) 31: L_0053: stloc.1 32: L_0054: ldarg.0 33: L_0055: ldfld class [System.Windows]System.Windows.Controls.ListBox PerfTest.MainPage::LB2 34: L_005a: ldloc.1 35: L_005b: callvirt instance void [System.Windows]System.Windows.Controls.ItemsControl::set_ItemsSource(class [mscorlib]System.Collections.IEnumerable) 36: L_0060: nop 37: L_0061: ret 38: } Again, not surprising here but a good indicator that you should consider using LINQ where possible. In fact if you have ReSharper installed you’ll see a squiggly (technical term) in the imperative code that says “Hey Dude, I can convert this to LINQ if you want to be c00L!” (or something like that, it’s the 2010 geek version of Clippy). What about the fluent version? As Jon correctly pointed out in the comments, when you compare the IL for the LINQ code and the IL for the fluent code it’s the same. LINQ and the fluent interface are just syntactical sugar so you decide what you’re most comfortable with. At the end of the day they’re both the same. Now onto the numbers. Again I expected the imperative version to be better performing than the LINQ version (before I saw the IL that was generated). Call it womanly instinct. A gut feel. Whatever. Some of the numbers are interesting though. For Jesse’s example of 50 items, the numbers were interesting. The imperative sample clocked in at 7ms while the LINQ version completed in 4. As the number of items went up, the elapsed time didn’t necessarily climb exponentially. At 500 items they were pretty much the same and the results were similar up to about 50,000 items. After that I tried 500,000 items where the gap widened but not by much (2.2 seconds for imperative, 2.3 for LINQ). It wasn’t until I tried 5,000,000 items where things were noticeable. Imperative filled the list in 20 seconds while LINQ took 8 seconds longer (although personally I wouldn’t suggest you put 5 million items in a list unless you want your users showing up at your door with torches and pitchforks). Here’s the table with the full results. Method/Items 50 500 5,000 50,000 500,000 5,000,000 Imperative 7ms 7ms 38ms 223ms 2230ms 20974ms LINQ/Fluent 4ms 6ms 41ms 240ms 2310ms 28731ms Like I said, at the end of the day it’s not a huge difference and you really don’t want your users waiting around for 30 seconds on a mobile device filling lists. In fact if Windows Phone 7 detects you’re taking more than 10 seconds to do any one thing, it considers the app hung and shuts it down. The results here are for Windows Phone 7 but frankly they're the same for desktop and web apps so feel free to apply it generally. From a programming perspective, choose what you like. Some LINQ statements can get pretty hairy so I usually fall back with my simple mind and write it imperatively. If you really want to impress your friends, write it old school then let ReSharper do the hard work for! Happy programming!

  Read the article

• Customize the SimpleMembership in ASP.NET MVC 4.0

  - by thangchung

  As we know, .NET 4.5 have come up to us, and come along with a lot of new interesting features as well. Visual Studio 2012 was also introduced some days ago. They made us feel very happy with cool improvement along with us. Performance when loading code editor is very good at the moment (immediate after click on the solution). I explore some of cool features at these days. Some of them like Json.NET integrated in ASP.NET MVC 4.0, improvement on asynchronous action, new lightweight theme on Visual Studio, supporting very good on mobile development, improvement on authentication… I reviewed them, and found out that in this version of .NET Microsoft was not only developed new feature that suggest from community but also focused on improvement performance of existing features or components. Besides that, they also opened source more projects, like Entity Framework, Reactive Extensions, ASP.NET Web Stack… At the moment, I feel Microsoft want to open source more and more their projects. Today, I am going to dive in deep on new SimpleMembership model. It is really good because in this security model, Microsoft actually focus on development needs. As we know, in the past, they introduce some of provider supplied for coding security like MembershipProvider, RoleProvider… I don’t need to talk but everyone that have ever used it know that they were actually hard to use, and not easy to maintain and unit testing. Why? Because every time you inherit it, you need to override all methods inside it. Some people try to abstract it by introduce more method with virtual keyword, and try to implement basic behavior, so in the subclass we only need to override the method that need for their business. But to me, it’s only the way to work around. ASP.NET team and Web Matrix knew about it, so they built the new features based on existing components on .NET framework. And one of component that comes to us is SimpleMembership and SimpleRole. They implemented the Façade pattern on the top of those, and called it is WebSecurity. In the web, we can call WebSecurity anywhere we want, and make a call to inside wrapper of it. I read a lot of them on web blog, on technical news, on MSDN as well. Matthew Osborn had an excellent article about it at his blog. Jon Galloway had an article like this at here. He analyzed why old membership provider not fixed well to ASP.NET MVC and how to get over it. Those are very good to me. It introduced to me about how to doing SimpleMembership on it, how to doing it on new ASP.NET MVC web application. But one thing, those didn’t tell me was how to doing it on existing security model (that mean we already had Users and Roles on legacy system, and how we can integrate it to this system), that’s a reason I will introduce it today. I have spent couples of hours to see what’s inside this, and try to make one example to clarify my concern. And it’s lucky that I can make it working well.The first thing, we need to create new ASP.NET MVC application on Visual Studio 2012. We need to choose Internet type for this web application. ASP.NET MVC actually creates all needs components for the basic membership and basic role. The cool feature is DoNetOpenAuth come along with it that means we can log-in using facebook, twitter or Windows Live if you want. But it’s only for LocalDb, so we need to change it to fix with existing database model on SQL Server. The next step we have to make SimpleMembership can understand which database we use and show it which column need to point to for the ID and UserName. I really like this feature because SimpleMembership on need to know about the ID and UserName, and they don’t care about rest of it. I assume that we have an existing database model like So we will point it in code like The codes for it, we put on InitializeSimpleMembershipAttribute like [AttributeUsage(AttributeTargets.Class | AttributeTargets.Method, AllowMultiple = false, Inherited = true)]     public sealed class InitializeSimpleMembershipAttribute : ActionFilterAttribute     {         private static SimpleMembershipInitializer _initializer;         private static object _initializerLock = new object();         private static bool _isInitialized;         public override void OnActionExecuting(ActionExecutingContext filterContext)         {             // Ensure ASP.NET Simple Membership is initialized only once per app start             LazyInitializer.EnsureInitialized(ref _initializer, ref _isInitialized, ref _initializerLock);         }         private class SimpleMembershipInitializer         {             public SimpleMembershipInitializer()             {                 try                 {                     WebSecurity.InitializeDatabaseConnection("DefaultDb", "User", "Id", "UserName", autoCreateTables: true);                 }                 catch (Exception ex)                 {                     throw new InvalidOperationException("The ASP.NET Simple Membership database could not be initialized. For more information, please see http://go.microsoft.com/fwlink/?LinkId=256588", ex);                 }             }         }     }And decorating it in the AccountController as below [Authorize]     [InitializeSimpleMembership]     public class AccountController : ControllerIn this case, assuming that we need to override the ValidateUser to point this to existing User database table, and validate it. We have to add one more class like public class CustomAdminMembershipProvider : SimpleMembershipProvider     {         // TODO: will do a better way         private const string SELECT_ALL_USER_SCRIPT = "select * from [dbo].[User]private where UserName = '{0}'";         private readonly IEncrypting _encryptor;         private readonly SimpleSecurityContext _simpleSecurityContext;         public CustomAdminMembershipProvider(SimpleSecurityContext simpleSecurityContext)             : this(new Encryptor(), new SimpleSecurityContext("DefaultDb"))         {         }         public CustomAdminMembershipProvider(IEncrypting encryptor, SimpleSecurityContext simpleSecurityContext)         {             _encryptor = encryptor;             _simpleSecurityContext = simpleSecurityContext;         }         public override bool ValidateUser(string username, string password)         {             if (string.IsNullOrEmpty(username))             {                 throw new ArgumentException("Argument cannot be null or empty", "username");             }             if (string.IsNullOrEmpty(password))             {                 throw new ArgumentException("Argument cannot be null or empty", "password");             }             var hash = _encryptor.Encode(password);             using (_simpleSecurityContext)             {                 var users =                     _simpleSecurityContext.Users.SqlQuery(                         string.Format(SELECT_ALL_USER_SCRIPT, username));                 if (users == null && !users.Any())                 {                     return false;                 }                 return users.FirstOrDefault().Password == hash;             }         }     }SimpleSecurityDataContext at here public class SimpleSecurityContext : DbContext     {         public DbSet<User> Users { get; set; }         public SimpleSecurityContext(string connStringName) :             base(connStringName)         {             this.Configuration.LazyLoadingEnabled = true;             this.Configuration.ProxyCreationEnabled = false;         }         protected override void OnModelCreating(DbModelBuilder modelBuilder)         {             base.OnModelCreating(modelBuilder);                          modelBuilder.Configurations.Add(new UserMapping());         }     }And Mapping for User as below public class UserMapping : EntityMappingBase<User>     {         public UserMapping()         {             this.Property(x => x.UserName);             this.Property(x => x.DisplayName);             this.Property(x => x.Password);             this.Property(x => x.Email);             this.ToTable("User");         }     }One important thing, you need to modify the web.config to point to our customize SimpleMembership <membership defaultProvider="AdminMemberProvider" userIsOnlineTimeWindow="15">       <providers>         <clear/>         <add name="AdminMemberProvider" type="CIK.News.Web.Infras.Security.CustomAdminMembershipProvider, CIK.News.Web.Infras" />       </providers>     </membership>     <roleManager enabled="false">       <providers>         <clear />         <add name="AdminRoleProvider" type="CIK.News.Web.Infras.Security.AdminRoleProvider, CIK.News.Web.Infras" />       </providers>     </roleManager>The good thing at here is we don’t need to modify the code on AccountController. We only need to modify on SimpleMembership and Simple Role (if need). Now build all solutions, run it. We should see a screen like thisIf I login to Twitter button at the bottom of this page, we will be transfer to twitter authentication pageYou have to waiting for a moment Afterwards it will transfer you back to your admin screenYou can find all source codes at my MSDN code. I will really happy if you guys feel free to put some comments as below. It will be helpful to improvement my code in the future. Thank for all your readings. 

  Read the article

• ffmpeg-php permission denied on localhost

  - by user572271

  Hello, I am very new to php. I recently setup php on my mac and I am trying to setup ffmpeg-php to convert various videos to flv or other formats as desired. I used this tutorial FFmpeg Mac Installation and I got ffmpeg to work using the terminal, however, when I try to encode a movie using php I get an error. In my apache error_log file it says permission denied next to the flv file (shown below). FFmpeg version 0.6, Copyright (c) 2000-2010 the FFmpeg developers built on Dec 30 2010 08:36:24 with gcc 4.2.1 (Apple Inc. build 5646) (dot 1) configuration: --prefix=/usr/local --enable-shared --disable-mmx --enable-libmp3lame --enable-gpl --enable-libfaad --enable-zlib --enable-libvorbis --enable-libfaac --enable-nonfree libavutil 50.15. 1 / 50.15. 1 libavcodec 52.72. 2 / 52.72. 2 libavformat 52.64. 2 / 52.64. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0.11. 0 / 0.11. 0 Seems stream 1 codec frame rate differs from container frame rate: 1200.00 (1200/1) - 30.00 (30/1) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/Users/myApple/Sites/AdHere/test.mov': Metadata: major_brand : qt minor_version : 537199360 compatible_brands: qt Duration: 00:00:02.04, start: 0.000000, bitrate: 1109 kb/s Stream #0.0(eng): Audio: aac, 44100 Hz, stereo, s16, 97 kb/s Stream #0.1(eng): Video: h264, yuv420p, 640x480, 1027 kb/s, 30.15 fps, 30 tbr, 600 tbn, 1200 tbc /Users/myApple/Sites/AdHere/movteststuff.flv: Permission denied I have no idea what the problem is. I am using the following php code: <?php extension_loaded('ffmpeg') or die('Error in loading ffmpeg'); $ffmpegInstance = new ffmpeg_movie('test.AVI'); echo "getDuration: " . $ffmpegInstance->getDuration() . "<br>getFrameCount: " . $ffmpegInstance->getFrameCount() . "<br>getFrameRate: " . $ffmpegInstance->getFrameRate() . "<br>getFilename: " . $ffmpegInstance->getFilename() . "<br>getComment: " . $ffmpegInstance->getComment() . "<br>getTitle: " . $ffmpegInstance->getTitle() . "<br>getAuthor: " . $ffmpegInstance->getAuthor() . "<br>getCopyright: " . $ffmpegInstance->getCopyright() . "<br>getArtist: " . $ffmpegInstance->getArtist() . "<br>getGenre: " . $ffmpegInstance->getGenre() . "<br>getTrackNumber: " . $ffmpegInstance->getTrackNumber() . "<br>getYear: " . $ffmpegInstance->getYear() . "<br>getFrameHeight: " . $ffmpegInstance->getFrameHeight() . "<br>getFrameWidth: " . $ffmpegInstance->getFrameWidth() . "<br>getPixelFormat: " . $ffmpegInstance->getPixelFormat() . "<br>getBitRate: " . $ffmpegInstance->getBitRate() . "<br>getVideoBitRate: " . $ffmpegInstance->getVideoBitRate() . "<br>getAudioBitRate: " . $ffmpegInstance->getAudioBitRate() . "<br>getAudioSampleRate: " . $ffmpegInstance->getAudioSampleRate() . "<br>getVideoCodec: " . $ffmpegInstance->getVideoCodec() . "<br>getAudioCodec: " . $ffmpegInstance->getAudioCodec() . "<br>getAudioChannels: " . $ffmpegInstance->getAudioChannels() . "<br>hasAudio: " . $ffmpegInstance->hasAudio(); exec('ffmpeg -i /Users/myApple/Sites/AdHere/test.mov /Users/myApple/Sites/AdHere/movteststuff.flv'); ?> I am able to see various parameters like filename, frameheight, framewidth, which leads me to believe that ffmpeg-php is kind of working, but maybe I am just doing something wrong in the exec() command. Anyone have any ideas. I have been struggling with setting up ffmpeg for quite some time now. Thanks! -Jon

  Read the article

• Problem with ajax form on Codeigniter

  - by Code Burn

  Everytime I test the email is send correctly. (I have tested in PC: IE6, IE7, IE8, Safari, Firefox, Chrome. MAC: Safari, Firefox, Chrome.) Nome: Jon Doe Empresa: Star Cargo: Developer Email: [email protected] Telefone: 090909222988 Assunto: Subject here.. But I keep recieving emails like this from costumers: Nome: Empresa: Cargo: Email: Telefone: Assunto: CONTACT_FORM.PHP <form name="frm" id="frm"> <div class="campoFormulario nomeDeCampo texto textocinzaescuro" >Nome<font style="color:#EE3063;">*</font></div> <div class="campoFormulario inputDeCampo" ><input class="texto textocinzaescuro" size="31" name="Cnome" id="Cnome" value=""/></div> <div class="campoFormulario nomeDeCampo texto textocinzaescuro" >Empresa<font style="color:#EE3063;">*</font></div> <div class="campoFormulario inputDeCampo" ><input class="texto textocinzaescuro" size="31" name="CEmpresa" id="CEmpresa" value=""/></div> <div class="campoFormulario nomeDeCampo texto textocinzaescuro" >Cargo</div> <div class="campoFormulario inputDeCampo" ><input class="texto textocinzaescuro" size="31" name="CCargo" id="CCargo" value=""/></div> <div class="campoFormulario nomeDeCampo texto textocinzaescuro" >Email<font style="color:#EE3063;">*</font></div> <div class="campoFormulario inputDeCampo" ><input class="texto textocinzaescuro" size="31" name="CEmail" id="CEmail" value=""/></div> <div class="campoFormulario nomeDeCampo texto textocinzaescuro" >Telefone</div> <div class="campoFormulario inputDeCampo" ><input class="texto textocinzaescuro" size="31" name="CTelefone" id="CTelefone" value=""/></div> <div class="campoFormulario nomeDeCampo texto textocinzaescuro" >Assunto<font style="color:#EE3063;">*</font></div> <div class="campoFormulario inputDeCampo" ><textarea class="texto textocinzaescuro" name="CAssunto" id="CAssunto" rows="2" cols="28"></textarea></div> <div class="campoFormulario nomeDeCampo texto textocinzaescuro" >&nbsp;</div> <div class="campoFormulario inputDeCampo" style="text-align:right;" ><input id="Cbutton" class="texto textocinzaescuro" type="submit" name="submit" value="Enviar" /></div> </form> <script type="text/javascript"> $(function() { $("#Cbutton").click(function() { if(validarForm()){ var Cnome = $("input#Cnome").val(); var CEmpresa = $("input#CEmpresa").val(); var CEmail = $("input#CEmail").val(); var CCargo = $("input#CCargo").val(); var CTelefone = $("input#CTelefone").val(); var CAssunto = $("textarea#CAssunto").val(); var dataString = 'nome='+ Cnome + '&Empresa=' + CEmpresa + '&Email=' + CEmail + '&Cargo=' + CCargo + '&Telefone=' + CTelefone + '&Assunto=' + CAssunto; //alert (dataString);return false; $.ajax({ type: "POST", url: "http://www.myserver.com/index.php/pt/envia", data: dataString, success: function() { $('#frm').remove(); $('#blocoform').append("<br />Obrigado. <img id='checkmark' src='http://www.myserver.com/public/images/estrutura/ok.gif' /><br />Será contactado brevemente.<br /><br /><br /><br /><br /><br />") .hide() .fadeIn(1500); } }); } return false; }); }); function validarForm(){ var error = 0; if(!validateNome(document.getElementById("Cnome"))){ error = 1 ;} if(!validateNome(document.getElementById("CEmpresa"))){ error = 1 ;} if(!validateEmail(document.getElementById("CEmail"))){ error = 1 ;} if(!validateNome(document.getElementById("CAssunto"))){ error = 1 ;} if(error == 0){ //frm.submit(); return true; }else{ alert('Preencha os campos correctamente.'); return false; } } function validateNome(fld){ if( fld.value.length == 0 ){ fld.style.backgroundColor = '#FFFFCC'; //alert('Descrição é um campo obrigatório.'); return false; }else { fld.style.background = 'White'; return true; } } function trim(s) { return s.replace(/^\s+|\s+$/, ''); } function validateEmail(fld) { var tfld = trim(fld.value); var emailFilter = /^[^@]+@[^@.]+\.[^@]*\w\w$/ ; var illegalChars= /[\(\)\<\>\,\;\:\\\"\[\]]/ ; if (fld.value == "") { fld.style.background = '#FFFFCC'; //alert('Email é um campo obrigatório.'); return false; } else if (!emailFilter.test(tfld)) { //alert('Email inválido.'); fld.style.background = '#FFFFCC'; return false; } else if (fld.value.match(illegalChars)) { fld.style.background = '#FFFFCC'; //alert('Email inválido.'); return false; } else { fld.style.background = 'White'; return true; } } </script> FUNCTION ENVIA (email sender): function envia() { $this->load->helper(array('form', 'url')); $nome = $_POST['nome']; $empresa = $_POST['Empresa']; $cargo = $_POST['Cargo']; $email = $_POST['Email']; $telefone = $_POST['Telefone']; $assunto = $_POST['Assunto']; $mensagem = " Nome:".$nome." Empresa:".$empresa." Cargo:".$cargo." Email:".$email." Telefone:".$telefone." Assunto:".$assunto.""; $headers = 'From: [email protected]' . "\r\n" . 'Reply-To: no-reply' . "\r\n" . 'X-Mailer: PHP/' . phpversion(); mail('[email protected]', $mensagem, $headers); }

  Read the article

• Custom rails route problem with 2.3.8 and Mongrel

  - by CHsurfer

  I have a controller called 'exposures' which I created automatically with the script/generate scaffold call. The scaffold pages work fine. I created a custom action called 'test' in the exposures controller. When I try to call the page (http://127.0.0.1:3000/exposures/test/1) I get a blank, white screen with no text at all in the source. I am using Rails 2.3.8 and mongrel in the development environment. There are no entries in development.log and the console that was used to open mongrel has the following error: You might have expected an instance of Array. The error occurred while evaluating nil.split D:/Rails/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.8/lib/action_controller/cgi_process.rb:52:in dispatch_cgi' D:/Rails/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.8/lib/action_controller/dispatcher.rb:101:in dispatch_cgi' D:/Rails/ruby/lib/ruby/gems/1.8/gems/actionpack-2.3.8/lib/action_controller/dispatcher.rb:27:in dispatch' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel/rails.rb:76:in process' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel/rails.rb:74:in synchronize' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel/rails.rb:74:in process' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:159:in process_client' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:158:in each' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:158:in process_client' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:285:in run' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:285:in initialize' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:285:in new' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:285:in run' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:268:in initialize' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:268:in new' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel.rb:268:in run' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel/configurator.rb:282:in run' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel/configurator.rb:281:in each' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel/configurator.rb:281:in run' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/mongrel_rails:128:in run' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/../lib/mongrel/command.rb:212:in run' D:/Rails/ruby/lib/ruby/gems/1.8/gems/mongrel-1.1.2-x86-mswin32/bin/mongrel_rails:281 D:/Rails/ruby/bin/mongrel_rails:19:in load' D:/Rails/ruby/bin/mongrel_rails:19 Here is the exposures_controller code: class ExposuresController < ApplicationController # GET /exposures # GET /exposures.xml def index @exposures = Exposure.all respond_to do |format| format.html # index.html.erb format.xml { render :xml => @exposures } end end #/exposure/graph/1 def graph @exposure = Exposure.find(params[:id]) project_name = @exposure.tender.project.name group_name = @exposure.tender.user.group.name tender_desc = @exposure.tender.description direction = "Cash Out" direction = "Cash In" if @exposure.supply currency_1_and_2 = "#{@exposure.currency_in} = #{@exposure.currency_out}" title = "#{project_name}:#{group_name}:#{tender_desc}/n" title += "#{direction}:#{currency_1_and_2}" factors = Array.new carrieds = Array.new days = Array.new @exposure.rates.each do |r| factors << r.factor carrieds << r.carried days << r.day.to_s end max = (factors+carrieds).max min = (factors+carrieds).min g = Graph.new g.title(title, '{font-size: 12px;}') g.set_data(factors) g.line_hollow(2, 4, '0x80a033', 'Bounces', 10) g.set_x_labels(days) g.set_x_label_style( 10, '#CC3399', 2 ); g.set_y_min(min*0.9) g.set_y_max(max*1.1) g.set_y_label_steps(5) render :text = g.render end def test render :text = "this works" end # GET /exposures/1 # GET /exposures/1.xml def show @exposure = Exposure.find(params[:id]) @graph = open_flash_chart_object(700,250, "/exposures/graph/#{@exposure.id}") #@graph = "/exposures/graph/#{@exposure.id}" respond_to do |format| format.html # show.html.erb format.xml { render :xml => @exposure } end end # GET /exposures/new # GET /exposures/new.xml def new @exposure = Exposure.new respond_to do |format| format.html # new.html.erb format.xml { render :xml => @exposure } end end # GET /exposures/1/edit def edit @exposure = Exposure.find(params[:id]) end # POST /exposures # POST /exposures.xml def create @exposure = Exposure.new(params[:exposure]) respond_to do |format| if @exposure.save flash[:notice] = 'Exposure was successfully created.' format.html { redirect_to(@exposure) } format.xml { render :xml => @exposure, :status => :created, :location => @exposure } else format.html { render :action => "new" } format.xml { render :xml => @exposure.errors, :status => :unprocessable_entity } end end end # PUT /exposures/1 # PUT /exposures/1.xml def update @exposure = Exposure.find(params[:id]) respond_to do |format| if @exposure.update_attributes(params[:exposure]) flash[:notice] = 'Exposure was successfully updated.' format.html { redirect_to(@exposure) } format.xml { head :ok } else format.html { render :action => "edit" } format.xml { render :xml => @exposure.errors, :status => :unprocessable_entity } end end end # DELETE /exposures/1 # DELETE /exposures/1.xml def destroy @exposure = Exposure.find(params[:id]) @exposure.destroy respond_to do |format| format.html { redirect_to(exposures_url) } format.xml { head :ok } end end end Clever readers will notice the 'graph' action. This is what I really want to work, but if I can't even get the test action working, then I'm sure I have no chance. Any ideas? I have restarted mongrel a few times with no change. Here is the output of Rake routes (but I don't believe this is the problem. The error would be in the form of and HTML error response). D:\Rails\rails_apps\fxrake routes (in D:/Rails/rails_apps/fx) DEPRECATION WARNING: Rake tasks in vendor/plugins/open_flash_chart/tasks are deprecated. Use lib/tasks instead. (called from D:/ by/gems/1.8/gems/rails-2.3.8/lib/tasks/rails.rb:10) rates GET /rates(.:format) {:controller="rates", :action="index"} POST /rates(.:format) {:controller="rates", :action="create"} new_rate GET /rates/new(.:format) {:controller="rates", :action="new"} edit_rate GET /rates/:id/edit(.:format) {:controller="rates", :action="edit"} rate GET /rates/:id(.:format) {:controller="rates", :action="show"} PUT /rates/:id(.:format) {:controller="rates", :action="update"} DELETE /rates/:id(.:format) {:controller="rates", :action="destroy"} tenders GET /tenders(.:format) {:controller="tenders", :action="index"} POST /tenders(.:format) {:controller="tenders", :action="create"} new_tender GET /tenders/new(.:format) {:controller="tenders", :action="new"} edit_tender GET /tenders/:id/edit(.:format) {:controller="tenders", :action="edit"} tender GET /tenders/:id(.:format) {:controller="tenders", :action="show"} PUT /tenders/:id(.:format) {:controller="tenders", :action="update"} DELETE /tenders/:id(.:format) {:controller="tenders", :action="destroy"} exposures GET /exposures(.:format) {:controller="exposures", :action="index"} POST /exposures(.:format) {:controller="exposures", :action="create"} new_exposure GET /exposures/new(.:format) {:controller="exposures", :action="new"} edit_exposure GET /exposures/:id/edit(.:format) {:controller="exposures", :action="edit"} exposure GET /exposures/:id(.:format) {:controller="exposures", :action="show"} PUT /exposures/:id(.:format) {:controller="exposures", :action="update"} DELETE /exposures/:id(.:format) {:controller="exposures", :action="destroy"} currencies GET /currencies(.:format) {:controller="currencies", :action="index"} POST /currencies(.:format) {:controller="currencies", :action="create"} new_currency GET /currencies/new(.:format) {:controller="currencies", :action="new"} edit_currency GET /currencies/:id/edit(.:format) {:controller="currencies", :action="edit"} currency GET /currencies/:id(.:format) {:controller="currencies", :action="show"} PUT /currencies/:id(.:format) {:controller="currencies", :action="update"} DELETE /currencies/:id(.:format) {:controller="currencies", :action="destroy"} projects GET /projects(.:format) {:controller="projects", :action="index"} POST /projects(.:format) {:controller="projects", :action="create"} new_project GET /projects/new(.:format) {:controller="projects", :action="new"} edit_project GET /projects/:id/edit(.:format) {:controller="projects", :action="edit"} project GET /projects/:id(.:format) {:controller="projects", :action="show"} PUT /projects/:id(.:format) {:controller="projects", :action="update"} DELETE /projects/:id(.:format) {:controller="projects", :action="destroy"} groups GET /groups(.:format) {:controller="groups", :action="index"} POST /groups(.:format) {:controller="groups", :action="create"} new_group GET /groups/new(.:format) {:controller="groups", :action="new"} edit_group GET /groups/:id/edit(.:format) {:controller="groups", :action="edit"} group GET /groups/:id(.:format) {:controller="groups", :action="show"} PUT /groups/:id(.:format) {:controller="groups", :action="update"} DELETE /groups/:id(.:format) {:controller="groups", :action="destroy"} users GET /users(.:format) {:controller="users", :action="index"} POST /users(.:format) {:controller="users", :action="create"} new_user GET /users/new(.:format) {:controller="users", :action="new"} edit_user GET /users/:id/edit(.:format) {:controller="users", :action="edit"} user GET /users/:id(.:format) {:controller="users", :action="show"} PUT /users/:id(.:format) {:controller="users", :action="update"} DELETE /users/:id(.:format) {:controller="users", :action="destroy"} /:controller/:action/:id /:controller/:action/:id(.:format) D:\Rails\rails_apps\fxrails -v Rails 2.3.8 Thanks in advance for the help -Jon

  Read the article

• Many to Many Logic in ASP.NET MVC

  - by Jonathan Stowell

  Hi All, I will restrict this to the three tables I am trying to work with Problem, Communications, and ProbComms. The scenario is that a Student may have many Problems concurrently which may affect their studies. Lecturers may have future communications with a student after an initial problem is logged, however as a Student may have multiple Problems the Lecturer may decide that the discussion they had is related to more than one Problem. Here is a screenshot of the LINQ representation of my DB: LINQ Screenshot At the moment in my StudentController I have a StudentFormViewModel Class: // //ViewModel Class public class StudentFormViewModel { IProbCommRepository probCommRepository; // Properties public Student Student { get; private set; } public IEnumerable<ProbComm> ProbComm { get; private set; } // // Dependency Injection enabled constructors public StudentFormViewModel(Student student, IEnumerable<ProbComm> probComm) : this(new ProbCommRepository()) { this.Student = student; this.ProbComm = probComm; } public StudentFormViewModel(IProbCommRepository pRepository) { probCommRepository = pRepository; } } When I go to the Students Detail Page this runs: public ActionResult Details(string id) { StudentFormViewModel viewdata = new StudentFormViewModel(studentRepository.GetStudent(id), probCommRepository.FindAllProblemComms(id)); if (viewdata == null) return View("NotFound"); else return View(viewdata); } The GetStudent works fine and returns an instance of the student to output on the page, below the student I output all problems logged against them, but underneath these problems I want to show the communications related to the Problem. The LINQ I am using for ProbComms is This is located in the Model class ProbCommRepository, and accessed via a IProbCommRepository interface: public IQueryable<ProbComm> FindAllProblemComms(string studentEmail) { return (from p in db.ProbComms where p.Problem.StudentEmail.Equals(studentEmail) orderby p.Problem.ProblemDateTime select p); } However for example if I have this data in the ProbComms table: ProblemID CommunicationID 1 1 1 2 The query returns two rows so I assume I somehow have to groupby Problem or ProblemID but I am not too sure how to do this with the way I have built things as the return type has to be ProbComm for the query as thats what Model class its located in. When it comes to the view the Details.aspx calls two partial views each passing the relevant view data through, StudentDetails works fine page: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<MitigatingCircumstances.Controllers.StudentFormViewModel>" %> <% Html.RenderPartial("StudentDetails", this.ViewData.Model.Student); %> <% Html.RenderPartial("StudentProblems", this.ViewData.Model.ProbComm); %> StudentProblems uses a foreach loop to loop through records in the Model and I am trying another foreach loop to output the communication details: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<IEnumerable<MitigatingCircumstances.Models.ProbComm>>" %> <script type="text/javascript" language="javascript"> $(document).ready(function() { $("DIV.ContainerPanel > DIV.collapsePanelHeader > DIV.ArrowExpand").toggle( function() { $(this).parent().next("div.Content").show("slow"); $(this).attr("class", "ArrowClose"); }, function() { $(this).parent().next("div.Content").hide("slow"); $(this).attr("class", "ArrowExpand"); }); }); </script> <div class="studentProblems"> <% var i = 0; foreach (var item in Model) { %> <div id="ContainerPanel<%= i = i + 1 %>" class="ContainerPanel"> <div id="header<%= i = i + 1 %>" class="collapsePanelHeader"> <div id="dvHeaderText<%= i = i + 1 %>" class="HeaderContent"><%= Html.Encode(String.Format("{0:dd/MM/yyyy}", item.Problem.ProblemDateTime))%></div> <div id="dvArrow<%= i = i + 1 %>" class="ArrowExpand"></div> </div> <div id="dvContent<%= i = i + 1 %>" class="Content" style="display: none"> <p> Type: <%= Html.Encode(item.Problem.CommunicationType.TypeName) %> </p> <p> Problem Outline: <%= Html.Encode(item.Problem.ProblemOutline)%> </p> <p> Mitigating Circumstance Form: <%= Html.Encode(item.Problem.MCF)%> </p> <p> Mitigating Circumstance Level: <%= Html.Encode(item.Problem.MitigatingCircumstanceLevel.MCLevel)%> </p> <p> Absent From: <%= Html.Encode(String.Format("{0:g}", item.Problem.AbsentFrom))%> </p> <p> Absent Until: <%= Html.Encode(String.Format("{0:g}", item.Problem.AbsentUntil))%> </p> <p> Requested Follow Up: <%= Html.Encode(String.Format("{0:g}", item.Problem.RequestedFollowUp))%> </p> <p>Problem Communications</p> <% foreach (var comm in Model) { %> <p> <% if (item.Problem.ProblemID == comm.ProblemID) { %> <%= Html.Encode(comm.ProblemCommunication.CommunicationOutline)%> <% } %> </p> <% } %> </div> </div> <br /> <% } %> </div> The issue is that using the example data before the Model has two records for the same problem as there are two communications for that problem, therefore duplicating the output. Any help with this would be gratefully appreciated. Thanks, Jon

  Read the article

< Previous Page | 37 38 39 40 41 42  | Next Page >