Search Results

Search found 19928 results on 798 pages for 'multiple constructors'.

Page 41/798 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Can T520+Bumblebee run an external monitor via DisplayPort?

  - by Fen

  Using 64-bit Ubuntu 11.10 and integrated (Intel) graphics, I can run the 1600x900 laptop display plus a 1600x1200 external monitor connected to the VGA adapter. But my external monitor is 1920x1200 so I have black stripes on each side. I believe the resolution is limited like this as the maximum resolution available from the Intel GPU is 2560x1600 = 4,096,000 pixels and I'm asking for a 3520x1200 = 4,224,000 display (with 1200x300 lost above the laptop screen). At 3200x1200 = 3,840,000 pixels, the Intel GPU seems happy. Under Windows, the same limit exists when using the VGA adapter, but if I turn Optimus on then I can connect the external monitor to the DisplayPort and get its full resolution and an extended desktop. I've seen that Bumblebee can run apps on the DisplayPort using the 'optirun' command. My question is: can Bumblebee run the DisplayPort in concert with the Intel card running the laptop screen creating a large virtual desktop (as on Windows)? If so, are there any pointers to how to do this? I tried once, failed, and dropped back to Integrated Graphics (and black stripes) as I could find no reports of this configuration working.

  Read the article

• Monitor flickering ATI

  - by Atzu

  I'm using ubuntu 12.10 on laptop samsung with randeon hd 6620g (APU A8), when I run amdcccle -version it says 2.18, not sure if that's the correct version. My problem is that I have and external monitor, AOC e2343Fsk and when I finally got it working at the resolution I want 1920x1080 it works fine for like 5minutes and then it starts flickering... I solved this on Windows (the exact same problem) with some options (I don't remember very well) I believe there were some buttons '+' and '-' on some vsync option I played with them on windows and Yay! got it working, but I don't see anything similar on this catalyst version (I used xorg-edgers ppa for installing fglrx). Thanks.

  Read the article

• How do I make Ubuntu aware of plugging in and out a second monitor ?

  - by Agmenor

  Usually, when I plug in a second monitor and I want my computer to be aware of it, I have to go to 'System' - 'Preferences' - 'Monitors'. Then, without clicking anywhere, my desktop knows it has to adapt itself (by cloning the screen or broadening the virtual desktop). How can I make this happen automatically ? For more information, my computer is an Acer Extensa 5636 notebook plugged to a Compaq CQ1859s monitor, using a VGA cable.

  Read the article

• Ubuntu 12.04 Freezes after removing the HDMI cable or changing settings

  - by euDennis

  I'm using an fresh install of Ubuntu 12.04 and I'm having some problems with HDMI. I usually use it with my TV, but since the update isn't working any more. Sometimes in 11.10 I had to execute a script to get the video and sound to work in HDMI, but it was OK. Since the update, when I connect the HDMI cable, it works, but if I make any change in the display settings (like resolution, monitor position, etc,) it freezes. And if I don't change anything, it's working in both monitors, but when I remove the cable, it freezes and even the ctrl+alt+f2 shortcut works. Any ideas for fixing this? I Googled and only found many people having problems, usually with sound.

  Read the article

• Why is my Workspace switcher view skewed

  - by Lee

  I have been using Workspace switcher in Ubuntu just fine but recently have encountered this problem. The windows in the switcher don't fill the screen. I must have pressed some combination of buttons somehow but can't find any information anywhere in regards to resizing them. As you can see in the screen shot it looks like a perspective view or something. http://i1115.photobucket.com/albums/k553/lmt337/Screenshotfrom2012-07-04103519.png I should also add I have a dual monitor setup and nvidia graphics. The switcher still works but the fact the screens dont fit my actual screens is driving me nuts. Thanks in advance for any help.

  Read the article

• Can't set proper resolution with a Geforce 520

  - by D0X

  I installed the 12.04 LTS but cannot get my two monitors working. The latest nvidia-current drivers installed, but i just cant set proper resolution. My card is a geforce 520 1 DVI 1 VGA. With the nvidia drivers installed i can set the DVI monitor to 1600x1200 but the VGA no further than 1360x768 (with nvidia-settings). Without the nvidia driver (using the nouveau) it doesn't work either. This same issue i had with 11.10 and i had high hopes for 12.04.

  Read the article

• Google new algorithm: My company have a 40 sites with different domains that some of their articles appears in my main website

  - by user5674576

  Hi, My company have a 40 sites with different domains that some of their articles appears in my main website with reference to their source. Our articles write by high level processionals in the field that they write about - we also pay them high salary. In recent google algorithm change my main site rating down very seriously. What should we do to restore company main site google rating? our solution and ideas that not working well: rel="canonical" to source website (we already have it before google change without results) meta "original-source" but not have rating influence (we already have it before google change without results) Edit:: maybe we should delete rel="canonical" from main website articles that refer to our other small websites (because this articles in main website not indexed in google)? Thanks in advance

  Read the article

• How do I get HDMI output working on a Dell XPS 15 L502x?

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

• Best Strategy for Exact Match Domain (EMD) Along Side Branded Domain

  - by ChrisInCambo

  I lucked out and managed to buy a two word .com EMD for the most important key-phrase for our b2b SaaS startup. Shutting down our branded domain isn't an option, we've already got too much invested in that brand (not in terms of SEO but in terms of other marketing efforts). The brand domain at present hasn't really been optimised for this key-phrase and we haven't invested any effort in SEO to date on that domain, but now we have some resources and want to make a big push for that key-phrase. So what is the best strategy for an EMD when you want already have a branded domain that you don't want to close or have penalised in some way?

  Read the article

• C# XNA 2D Multiple boxes collision detection and movement

  - by zini

  Hi, I've been making simple game where you shoot boxes that are coming towards you. All game objects are simple rectangles. Now I have problem with collision detection; how to check where the collision comes so I can change the coordinates right? I have this kind of situation: http://imgur.com/8yjfW Imagine that all of those blocks are moving towards you (green box). If those orange boxes collide with each other, they should "avoid" themselves and not go through each other. I have class Enemy which has properties x, y and such. Now I'm doing the collision like this: // os.Count is an amount of other enemies colliding with this enemy if (os.Count == 0) { // If enemy doesn't collide with other enemy lasty = y; lastx = x; slope = (x - player.x) / (y - player.y); x += slope * l; // l is "movement speed" of enemy (float) if (y > player.y) { y = lasty; } else if (y < player.y) { y += l; } } else { foreach(Enemy b in os) { if (b.y > this.y) { // If some colliding enemy is closer player than this enemy, that closer one will be moved towards the player b.lasty = b.y; if (!BiggestY(os)) { // BiggestY returns true if this enemy has the biggest Y b.y += b.l; } b.x = b.lastx; } } } But this is very, very bad way to do this. I know it, but I just can't figure out other way. And as a matter in fact, this method doesn't even work pretty good; if multiple enemies are colliding same enemy they go through each other. I explained this pretty badly, but I hope that you understand this. And to sum up, as I said: How to check where the collision comes so I can change the coordinates right?

  Read the article

• Sudden crash with gnome and unity

  - by cent89

  I've a Toshiba Satellite Pro U400 with Ubuntu 11.10. Very often when I'm working on the pc reboots itself, or close all programs and return to the login screen. This is very annoying, often I lose my job I'm doing, sometimes I make bad figures while projecting slides or movies in public. What happens is that with Unity 3 with Gnome, so I do not depend on these. I also checked the log files but with little success because I can not interpret them the best. Can you help me solve this serious problem? thanks. Roberto

  Read the article

• OpenGL ES multiple objects not being rendered

  - by ladiesMan217

  I am doing the following to render multiple balls move around the screen but only 1 ball is seen to appear and function. I don't know why the rest (count-1) balls are not being drawn public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glDisable(GL10.GL_DITHER); gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glMatrixMode(GL10.GL_MODELVIEW); gl.glClientActiveTexture(DRAWING_CACHE_QUALITY_HIGH); gl.glLoadIdentity(); for(int i=0;i<mParticleSystem.getParticleCount();i++){ gl.glPushMatrix(); gl.glTranslatef(mParticleSystem.getPosX(i), mParticleSystem.getPosY(i), -3.0f); gl.glScalef(0.3f, 0.3f, 0.3f); gl.glColor4f(r.nextFloat(), r.nextFloat(), r.nextFloat(), 1); gl.glEnable(GL10.GL_TEXTURE_2D); mParticleSystem.getBall(i).draw(gl); gl.glPopMatrix(); } } Here is my void draw(GL10 gl) method public void draw(GL10 gl){ gl.glEnable(GL10.GL_CULL_FACE); gl.glEnable(GL10.GL_SMOOTH); gl.glEnable(GL10.GL_DEPTH_TEST); // gl.glTranslatef(0.2f, 0.2f, -3.0f); // gl.glScalef(size, size, 1.0f); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, vertBuff); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glDrawArrays(GL10.GL_TRIANGLE_FAN, 0, points/2); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); }

  Read the article

• Can't login to Unity 3d after enabling Xinerama for a short moment

  - by Amir Adar

  Today I connected a second monitor to my computer. I set it up using nVidia's control panel, and all was working quite well, so I figured it won't be a problem to try Xinerama, just to see the difference between that and twinview. After enabling Xinerama and restarting the X session, I saw that I was logged into a Unity 2d session. I thought it was a problem with Xinerama, so I switched back to twinview, but it still logged me into Unity 2d. I tried disconnecting the second monitor, no luck: still Unity 2d. I tried changing GPU drivers and installing drivers from a separate ppa, and still I was logged into Unity 2d. Up until this point, I didn't have any problem logging into Unity 3d. It only happened after I tried using Xinerama. I should note that I was doing all this while updates were going on in the background, so it could be something related to that, though I can't imagine what (I tried booting with another kernel, but no luck). So what exactly happened? Did changing the mode to Xinerama triggered some other changes that I'm not aware of? Did these updates cause a certain malfunction in the driver? Is it something else?

  Read the article

• How to drag widgets from monitor to monitor in kubuntu?

  - by Mien

  I have Kubuntu 12.04 on my Dell Inspiron. I use an extern monitor as my default one, and my laptop monitor as my second monitor. I can place widgets on the extern (default) screen, but when I drag them to the laptop (second) screen, they disappear. I can put widgets on the second screen, if I open the widget screen on that screen, but I can't drag them to my first monitor. How can I switch between monitors for the widgets?

  Read the article

• How can I extend the desktop onto an external monitor/projector?

  - by hellocatfood

  I've plugged in a projector into my laptop and I'm attempting to extend the desktop onto it (so that I can run a full screen app on the projector and have the controls on my laptop). I'm able to mirror the screens effectively (it does this by default) but I can't extend it. When I untick "Mirror screens" and press apply it asks me to log out and then back in again but it goes back to mirroring the screens. I'm able to extend desktop on to my external monitor at home, just not this projector. Is there a manual way or other way to do this other that through Monitors setting? My computer model is Dell Studio 1555: Pentium Dual Core T4300(2.1GHz,800MHz,1MB), 4096MB 800MHz DDR2 Dual Channel, 512 MB ATI Mobility RADEON HD 4570 using the ATI proprietary driver. My screen resolution is 1366x768 (16:9) The projector that it wont connect properly is a Hitachi CPX3. That page specifies that it's especially designed for projectors that use 16:10 aspect ratio, but considering my external monitor at home uses 4:3 should the differences in aspect ratio matter or be causing this error?

  Read the article

• SEO problem for site with 2 domains [closed]

  - by Harry

  Possible Duplicate: What is duplicate content and how can I avoid being penalized for it on my site? I have two domains pointing to the same site. I want both domains to co-exist, they share most of the same content, but they differ in design and they are aimed at different markets / rivaling communities. Is there a way to let google know that these two domains are the same site and don't cause me to get hit with a duplicate content penalty? Any other general SEO tips for this situation would also be welcomed. Thanks. Come on man, why was this closed. The linked page is completely irrelevant for me.

  Read the article

• How to handle multiple pages of the same site with the same outlinks

  - by pandafromchina

  I am developing a back link tool for Chinese SEO (our web site URL is: http://link.aizhan.com just like ahrefs.com. I encountered a problem which is how to handle multiple pages of the same site with the same out links. For example: Most pages of bbs.chinaz.com have the same out links such as: bbs.chinaz.com/Tea/thread-6293993-1-1.html bbs.chinaz.com/Tea/list-1.html bbs.chinaz.com/alimama/thread-6265032-1-1.html bbs.chinaz.com/alimama/thread-6265032-2-1.html?userid=-1&extParms= bbs.chinaz.com/Shuiba/list-1.html bbs.chinaz.com/FeedBack/thread-4456753-1-1.html etc.. All of the pages have the same out links in the top of the page: www.cnzz.com(anchor text:????) www.313.com(????) www.idc123.com(????) Suppose I store these outlinks into database. The SEO will find there are six backlinks from bbs.chinaz.com of www.cnzz.com. This is obviously no sense for the SEO. Can you tell me how do you deal with this problem?

  Read the article

• Using onboard and pci-e graphics card at the same time

  - by Endle

  Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

  Read the article

• handling multiple interviews / offers [closed]

  - by farble1670

  What's the best way to handle a situation where you have, or expect to have multiple offers? The ideal situation is that your several offers come in about the same time, and you make a choice. this is not how it happens though. You may have an offer, and several near-final interviews lined up for the following days or weeks. One way to handle it would be to ask for a longer time to decide on the first offers you receive. 2 weeks? This gives time to rush the rest of the things you have going through to an end. i question whether asking for 2 weeks to decide is reasonable though. My guess is that an employer would see through that and force your hand. Another way to handle it would be to accept the first offer, and ask for a reasonable period before your start date, then simply "quit" the first position before you ever start if something better comes along. On one hand, employment is at-will, and employers exercise this fact regularly. On the other hand, it seems morally the wrong thing, and has the potential to burn some bridges. And of course the last option is to simply evaluate each offer in isolation, and accept or reject within the given time frame. any thoughts?

  Read the article

• display port on x230 not workgin

  - by Aaron

  having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

  Read the article

• How to pass information across domains to ask for newsletter only once?

  - by Michal Stefanow

  Lets assume following scenario, I have two sites: example1.com example2.com When user visits 1 there is a prompt "please signup to a newsletter". Same thing happens when user visits 2. However when navigating from 1 to 2 I don't want signup form to be shown. My first thought were 3rd-party cookies, but it seems that they are blocked / not working: http://stackoverflow.com/questions/4701922/how-does-facebook-set-cross-domain-cookies-for-iframes-on-canvas-pages?rq=1 http://stackoverflow.com/questions/172223/how-do-i-set-cookies-from-outside-domains-inside-iframes-in-safari?rq=1 Another thought is to append #noshow for each URL but that would require some work - for instance a script that would intercept click / tap events and modify URL structure depending on the address. (but that seems hacky) I wonder if you know a robust well-established solution to this issue? Thanks

  Read the article

• External monitor on old Dell 700m?

  - by Adam Henne

  Okay, linux noob. I installed 10.04 on an old Dell 700m in hopes of using it as a media center device. That seems to work great, except now it won't output to the external monitor. VGA cable works fine, TV recognizes other computers fine, it's the laptop that won't output. Turns out that the 700m, unlike every other computer out there, doesn't have a Fn hotkey to switch monitors. The only way to do it in Windows was to go through the Control Panel. In Ubuntu, though, the Monitor setup won't detect or recognize any monitors. The laptop display works fine, but I can't adjust or add anything. I did a little research and found suggestions for older Ubuntu builds involving the xorg.conf. I tried one out, in spite of my unfamiliarity, and it's screwed the whole display big time. I can fix that with a clean reinstall, that's no problem, but I'm cautious about editing xorg again. Any suggestions? Thank you!

  Read the article

• I'd like my window switcher to be per-monitor. How do I do that?

  - by Erigami

  I have a multi-monitor setup with nVidia drivers, running Unity/Compiz on 12.10. I'd like to treat each monitor separately, so I can switch desktops on one without affecting the other and run a window switcher that only switches between windows on the current monitor. How do I do that? None of the switchers listed in ccsm seem to limit themselves to the currently focused monitor, ditto for desktop switchers.

  Read the article

• Dual displays not working with Xinerama in Ubuntu 12.04

  - by user68489

  I just upgraded from Ubuntu 10.10 to 12.04. I had been using a display configuration just like the one described at http://bitkickers.blogspot.com/2009/08/rotate-just-one-monitor-with.html without any problems under 10.10. I have an nvidia Quadro FX 380 and have upgraded to the latest drivers (295.49). Everything appears to be fine when the system first boots up. However, after logging in, the left screen goes black, and the right screen displays what should be displayed on the left screen. Logging into Ubuntu 2D somewhat improves things. The left screen correctly displays the left portion of the desktop but the right screen contains a duplicate view of the left screen. Turning off Xinerama and enabling TwinView appears to fix the issues but does not allow the right monitor to be rotated. Since the display problems start to occur only after logging on, I thought it might have to do with carryover user configuration from 10.10 but the problems persist even when logging in as a guest. Clicking on System Settings - Displays results in the error message "Could not get screen information - RANDR extension is not present." Any help would be greatly appreciated.

  Read the article

• Connecting two monitors at the corners

  - by fastmultiplication

  I am using two separate X screens on two monitors and I would like them to be connected at the lower right corner. That is, if you move to the lower right corner of screen0 the mouse should appear at the upper left of screen1. I do not want an entire edge of each monitor to be permeable to the mouse. I modified the xorg.conf file like so: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Relative "Screen0" 1200 1000 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection (screen 0's resolution is 1280x1024) so there is a bit of overlap. However whenever I move the mouse to the bottom of screen0, the pointer appears at the upper left of screen1. And, the entire top of screen1 is permeable to the mouse and brings it to the lower left corner of screen0. I have tried various numbers in following the "relative" statement - if I put 1280 1024 the mouse does not cross over at all. If I use 1280 1023 the entire right side of screen0 is permeable. I haven't been able to find any documentation about how to explicitly tell the mouse where to crossover - is there some? It seems that xorg is being really aggressive in guessing where the mouse crossover should take place. Does anyone know how to do this? Thanks!

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >