Search Results

Search found 2524 results on 101 pages for 'rach 90'.

Page 41/101 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• HDFS datanode startup fails when disks are full

  - by mbac

  Our HDFS cluster is only 90% full but some datanodes have some disks that are 100% full. That means when we mass reboot the entire cluster some datanodes completely fail to start with a message like this: 2013-10-26 03:58:27,295 ERROR org.apache.hadoop.hdfs.server.datanode.DataNode: java.io.IOException: Mkdirs failed to create /mnt/local/sda1/hadoop/dfsdata/blocksBeingWritten Only three have to fail this way before we start experiencing real data loss. Currently we workaround it by decreasing the amount of space reserved for the root user but we'll eventually run out. We also run the re-balancer pretty much constantly, but some disks stay stuck at 100% anyway. Changing the dfs.datanode.failed.volumes.tolerated setting is not the solution as the volume has not failed. Any ideas?

  Read the article

• Visual annotator for large images

  - by pts

  I have a few hundred images of 30000 x 10000 pixels in size. Each image has lots of text (rendered as pixels) on it. I'd like to translate all text to another language. I speak both languages, and it's fine for me to translate each phrase manually. I need an image editor which can open these images quickly (faster than Inkscape, which needs about 60 seconds to open such an image), lets me zoom and rotate by 90 degrees, lets me erase (i.e. change the color of a selected rectangle to solid white), lets me add text, and lets me save the file as quickly as possible. I'd like to minimize the time I have to wait for the software to load, render and save images. Which is the best program for that on Windows? On Linux?

  Read the article

• Looking for MRP software

  - by Samuel

  I am looking for MRP software. All the stuff I have found so far looks like it's from the 90's and has that very old person business feel. I want something fresh and new. I would prefer an open source, web based solution. PHP/MySQL would be best but not required. I couldn't find anything that was web based that didn't make me want to cry. Superuser doesn't have a lot of eye candy but it still looks great. I am the web developer at my company so if I don't find anything I will be making it my self (well, try to at least).

  Read the article

• How do I analyze an Apache Bench result?

  - by Alan Hoffmeister

  I need some help with analyzing a log from Apache Bench: Benchmarking texteli.com (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Completed 600 requests Completed 700 requests Completed 800 requests Completed 900 requests Completed 1000 requests Finished 1000 requests Server Software: Server Hostname: texteli.com Server Port: 80 Document Path: /4f84b59c557eb79321000dfa Document Length: 13400 bytes Concurrency Level: 200 Time taken for tests: 37.030 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 13524000 bytes HTML transferred: 13400000 bytes Requests per second: 27.01 [#/sec] (mean) Time per request: 7406.024 [ms] (mean) Time per request: 37.030 [ms] (mean, across all concurrent requests) Transfer rate: 356.66 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 27 37 19.5 34 319 Processing: 80 6273 1673.7 6907 8987 Waiting: 47 3436 2085.2 3345 8856 Total: 115 6310 1675.8 6940 9022 Percentage of the requests served within a certain time (ms) 50% 6940 66% 6968 75% 6988 80% 7007 90% 7025 95% 7078 98% 8410 99% 8876 100% 9022 (longest request) What this results can tell me? Isn't 27 rps too slow?

  Read the article

• Testing the load factor in my lab

  - by Ami Winter

  I am a system admin in a lab, I have ~90 computers in the lab and I want to check the load factor on them.. meaning, to check how many people are working on the computers hourly.. To see if I need to buy more computers or not. I am looking for a way to build a script to check if a computer is logged on or not.. (0 for log off - 1 for log on) After I will have this data, I know how to build a script to build me the graphs. All the computers are linked via a domain and most of them have windows XP (few windows 7) I'll be happy to get some help. Amihay

  Read the article

• OpenVPN Configuration - Windows 7 client & debian server

  - by Guillaume

  I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

  Read the article

• Windows 2003-R2-Server: Process "System" takes large chunks of CPU time

  - by Dabu

  I have a domain controller running 2003 R2. The server behaves very well when restarted daily, however, each day it is not restarted, there's a process called "System" that takes enourmous chunks of CPU time (up to 95%). The server supports AD, WINS, DNS, has Kaspersky Endpoint Security running, and manages backups via Arcserve 15. When I tried so far: Process Explorer (ex-Sysinternals) shows that the "System" process has no sub-processes. In the "Threads" tab of the detailled view I can see that 90% of the CPU time is used up by "ntkrnlpa.exe+0x803c0". The "Interrupts" process is running at 3-5% of CPU time, I'm not sure if this accounts for the amount of CPU time that System takes.

  Read the article

• HP DV5T laptop problems using Adobe in multiple monitors

  - by Rolnik

  I have a dualview arrangement of two monitors that works just fine for 90% of my applications. However, any time I open Adobe Acrobat Reader to the larger monitor, it fails to permit enlarging of the window to fill the entire screen. In other words, it seems Adobe crops the PDF view at about the size of the smaller of the two monitors, despite Acrobat being present in the larger monitor. I'm using nVideo graphics on the laptop, and connecting to the larger monitor through the docking port of a docking station. Any ideas how to get the Acrobat to be aware that it has more screen real-estate and use it fully?

  Read the article

• Is it possible to install and use a printer in Azure Worker Roles?

  - by lurkerbelow

  I'd like to know if it's possible to create and use a printer in Azure Worker Roles. I do know that I can install printers with basic batch commands. So I could define a batch script that would run as a startup task. something like: rundll32 printui.dll,PrintUIEntry /if /b "printer" /f %windir%\inf\ntprint.inf /r "file:" /m "printername") Question: Can I use a printer to print to file, maybe to local storage? I do need the function to print to file or atleast to have a printer installed, because I have to get the PCL output from different installed printers. Sadly I can not test it by myself. I do not have a CC to join the 90 days trial.

  Read the article

• JFFS2 poor mount performance

  - by Marcin Polkowski

  I run multiple ARM boards with Debian Linux installed. Board is equipped with 512 MB of NAND memory. I've observed that after ~3 months of continuous run booting time increased significantly - it takes over 3 minutes to mount filesystem (JFFS2). System was using about 35% of available storage so I’ve removed unnecessary files (got to ~18%) but this didn't change anything. Then I realized that my software produces directories that are left empty so I’ve removed ~500 empty and unnecessary dirs. This didn’t help either. After system is started I see JFFS2 garbage collector (jffs2_gcd_mtd4) running and occupying over 90% of CPU. Now my question: is there a way to „optimize” JFFS2 filesystem for better performance - faster booting (my system have limited timid to boot up)? It would be great if this optimization could be done remotely - I have no physical access to boards.

  Read the article

• How full is too full for mechanical hard drives?

  - by Sunny Molini

  I have heard many claim that it doesn't matter how full a drive is until it starts cutting into temp and virtual memory space. This doesn't make sense to me, given the nature of how the data is transacted on a hard drive. The inside of the platter presents less data per revolution than the outside of the drive does, by significant factors. The inside 40% of the radius of full size hard drive is used for the spindle, so only the outside 60% is used for data storage, but that still means that the inside track of a hard drive presents data 60% slower than the outside track. By my calculation, a Hard drive that is only 10% full should perform about 2.25 times faster than a hard drive that is 90% full, assuming that the flow is constrained by other factors. Am I wildly off base here? For all the drives I know, even the top speeds of the first 1% of the drive would be well within the bandwidth provided by a SATA 2 connection.

  Read the article

• ShoreTel 230 phone calls from website

  - by Michael Irey

  Our company uses these fancy ShoreTel 230 phones. We make many phone calls from our custom built web based contact management system. It would be nice if our employees could click on a phone number from a webpage and have it automatically start dialing the number. (Similar to how iPhone handles this) Anyone every deploy something like this? I would imagine it would require some kind of background running ShoreTel process to accommodate this. 90% of our employees use PC (Windows 7) 10% use OS X Even a PC only solution would be great. Is this even possible and if so, where should one begin? Thanks!

  Read the article

• OpenBSD Routing Problem

  - by Ozkan SENOVA

  I am running OpenBSD on a network appliance hardware. It has 5 NICs. I want to give different IP's in same subnet to 3 nics. Eg: em0: 192.168.1.5 em1: 192.168.1.90 em2: 192.168.1.56 I make the necessary configuration with ifconfig, all interfaces works as expected when all the ethernet ports are plugged in to switch. But there is something wrong in routing. If I connect to 192.16.1.5 via any service(http, smtp etc.), traffic goes over link#3. If I unpug the cable from em2 I can't reach any IP's binded on device. Is there any way to route traffic over different links in this IP configuration?

  Read the article

• How to calculate required switch speed based on network usage?

  - by tobefound

  I have a 48 port HP Procurve Switch 2610 (J9088A) that can handle 13.0 million PPS (packets per second) and features wire speed switching capacity at 17.6Gbps. First off, what does that REALLY mean? Where do I start when trying to figure out if my office (with 70 employees) will be well setup with this switch? How to calculate through-put based on a user average load of X MB per day? 90% of the folks will only be sending email, access random websites, etc... the other 10% will be conducting heavier tasks like moving image files (10 MB) across network shares, constant external FTP streams through the switch to a server etc... Is this switch good enough?

  Read the article

• How do I know if my Xeon Processor supports hardware virtualisation?

  - by gshankar

  I've been scouring the net (mainly the wikipaedia lists and intel's site. I even pulled out the datasheet for my processor) but I can't seem to answer this question. Does my Xeon support hardware virtualisation? The processor in question is a: "Nocona" (standard-voltage, 90 nm) 2800MHz. Other details can be found here: http://en.wikipedia.org/wiki/List_of_Intel_Xeon_microprocessors#.22Nocona.22_.28standard-voltage.2C_90_nm.29 I'm pretty sure the answer is no as it's a pretty old server but I can't find a single place which has a definitive yes/no answer so I'm still looking...

  Read the article

• Dir and Findstr commands taking a long time to complete in Batch File

  - by user2405934

  dir %DRIVE_NAME%: /S /C /A-D /Q /T:C | findstr ".zip$ .doc$ .xls$ .xpt$ .cpt$ .cpo$ .xlsx$ .pdf$ .dat$ .txt$ .docx$ .csv$" >> file.info I am using above command to list all information in file, as below: 03/27/2013 01:02 PM 86,280 uusr\fr02 h123_frf67_rk_20140327.txt 03/27/2013 01:02 PM 5,513 usr\fr02 h123_frf67_rk_20140328.txt %DRIVE_NAME%: is mapped drive. Folders will be the same; not more than 100 folders and their sub-folders, and there will only be 2 or 3 files at time in any one of the folders. Now the issues is that for one folder it works perfect, but for 80 to 90 folders it is taking too much time. I think it's because of findstr and the different extensions used. Is there any way to make it faster?

  Read the article

• How to setup a virtual machine in Ubuntu desktop to run Debian Server

  - by stickman

  I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10).

  Read the article

• Problem with fitting graphics card

  - by Gary Robinson

  I have recently purchased a new radeon hd5670 graphics card. The problem I have is that it is what I might call a double height card. So the end where you fix the card to the case is twice the size of the card it is replacing. But this means that it is blocked by the rear of the network card. The only way I can see it to cut that part of the fixture part out then I won't have a problem. But has anyone any suggestions what I could use? To be clear it is not the actual card it is the fixture part which is 90 degress to the card that is causing the problem. Unless someone knows of another solution - some kind of pci-e extender that I could use as I could easily

  Read the article

• How do you live-migrate Hyper-V to Azure?

  - by TopHat

  I have a new install of Windows Server 2012 with the Hyper-V role setup and a couple VMs running along fat, dumb, and happy. I want to play with Azure hosting for VMs for a couple of stand-alone boxes. Is there anything special that I need to wire up to be able to live-migrate to Azure? I have the 90-day Azure trial account right now. Any special plumbing required? I have not found a lot of documentation about this yet. Everything I found points to manually copying the VHDs via command line and the Azure 2012 SDK.

  Read the article

• Laptop hot after format [migrated]

  - by Dany Khalife

  I recently formatted an HP G62 Laptop and installed all drivers from the HP site that should be installed for this model. But i noticed a very strange behavior, using Coretemp, the temp is always above 50 (on idle) and reaches 70 very quickly sometimes (Critical is 90) If i open youtube or skype alone, i can get temperatures as high as 83. Normally it was around 32 (on idle) and reaches 70 when i open games but not youtube.... I have a i3 processor and AMD graphics so i am wondering if somehow it's a graphics card issue (since i3 has integrated graphics as far as i know) Device manager shows only AMD graphics card tho, not sure if i3 graphics should appear here too. Any ideas what i might have forgotten to do after the format ?

  Read the article

• Is it bad to have a very full hard drive on a high traffic database server?

  - by MikeN

  Running an Ubuntu server with MySQL for a high traffic production database server. Nothing else is running on the machine except the MySQL instance. We store daily database backups on the DB server, is there any performance hit or reason why we should keep the hard disk relatively empty? If the disk is filled up to 86%+ with the database and all of the backups, does it hurt performance at all? So would the DB server running with 86-90%+ full capacity perform less well in any way than the server running with only a 10% full disk? The total disk size on the server is over 1 TB so even 10% of the disk should be enough for basic O/S swapping and such.

  Read the article

• Setting WMI permissions remotely on windows server 2003

  - by user41507

  Hello. I am a programmer , I don know the server well. I made a simple program checking the service on the remote server is started or not. by using this(http://msdn.microsoft.com/en-us/library/dwd0y33x(v=VS.90).aspx) but the permission should be set. and I can't find any document via the internet. except one document. http://msdn.microsoft.com/en-us/library/aa393266(VS.85).aspx but the engineer say that 'tell me exactly what I do. there are many DCOM are they any nice document to show him? thanks in advance

  Read the article

• Squid stale-while-revalidate not working when max-age=0

  - by Wiliam

  Squid 2.7 always reaches backend, expected is to reach backend using stale-while-revalidate only when cache expires, not when client triggers max-age=0. Script: <?php header('Cache-Control: public, max-age=10, stale-if-error=200, stale-while-revalidate=500'); header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT"); sleep(2); die("OK"); And squid config: # http_port public_ip:port accel defaultsite= default hostname, if not provided http_port 80 accel defaultsite=mydomain.com # IP and port of your main application server (or multiple) cache_peer 127.0.0.1 parent 8000 0 no-query allow-miss originserver name=main # Do not tell the world that which squid version we're running httpd_suppress_version_string on # Remove the Caching Control header for upstream servers header_access Cache-Control deny all #header_access Last-Modified deny all # log all incoming traffic in Apache format logformat combined %>a %ui %un [%tl] "%rm %ru HTTP/%rv" %Hs %<st "%{Referer}>h" "%{User-Agent}>h" %Ss:%Sh access_log /usr/local/squid/var/logs/squid.log combined all cache_effective_user squid refresh_pattern . 10080 90% 999999 ignore-no-cache override-expire ignore-private icp_port 0

  Read the article

• how to make solaris more friendly for a linux user

  - by user10015

  Hi there, I've been a linux user for years. Very used to the bash shell, used to linux shell key mappings that come with most mainstream distros. I'm also a happy vim user in linux & love my arrow keys. Just started a job where 90% of the systems are solaris & the default shell for administrators is ksh. The key mappings, things like autocomplete & history not working they way they should and is driving me insane. I've been told that i can change solaris bash, but it still doesn't feel like linux. How do I make things run they way I'm used to? Can someone please put me in the right direction.

  Read the article

• Thinkpad laptop heats up more than it used to - what are my options?

  - by jdelage

  Hi, I have a 3 yr old laptop (Thinkpad T61) which runs seemingly much hotter than it used to. It's not uncomfortable to touch, but I wonder whether I should do something about it. It does get uncomfortable if I have it on my lap (which I rarely need to do). I haven't made any mods to the laptop other than a bigger HD, and I recently cleaned up the inside (superficially - I didn't remove the fan). Are fans items that should be changed regularly? Edit: I use the laptop plugged in 90%+ of the time. Thanks, JDelage PS: I know that a 3-yr old laptop is old tech, but this one works perfectly so....

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >