Search Results

Search found 2177 results on 88 pages for 'wifi'.

Page 41/88 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

• Update drivers for TL-WN851ND

  - by Tony_GPR

  Today I bought a new PCI wireless card, TP-Link WN851ND, with Atheros AR9227 chipset. It has 2 antennas and is compatible with Wifi N so I thought it would improve the quality of the signal. But after install it on my computer the result is the opposite to expected. It doesn't connect to my network, while my old Wifi BG card connect without problems, I created an access point from my smartphone to try the card, and work, but is very slow loading pages. In Windows 7 works perfectly, so I think the problem is the driver. I have Ubuntu 12.04 LTS with kernel 3.2.0.31, is there a way to update the driver or I can apply a patch to improve the performance of the card? Otherwise, anyone know if there is a work in progress to improve compatibility with this chipset, or is it better to change the card and buy one with better driver compatibility. And finally, which wireless N compatible chipsets have good support under Linux/Ubuntu?

  Read the article

• how to find available wireless networks

  - by Quinn

  I'm using an HP Pavilion dv6000 I've looked at other answers similar to this question how ever when I look at my network symbol it doesn't say anything that the answer below says "Make sure that your wifi hardware switch is on or not. It is either F2 or F12 or near to it. Once the switch is enabled, there is a small fan-like applet on the top panel (Gnome Network Manager), fourth from the right. Click on it and if there is no tick mark on the option 'Enable Wireless', enable it. Wait till your wifi connection name appears." it how says 'Enable Networking' my wi-fi switch is on and I've tried using terminal to kill the applet as another answer suggests trying. Does anyone have any other ideas that might help? Just in case anybodies curious as to how I'm posting this I'm on my other ubuntu laptop that's running an older version.

  Read the article

• ubiquity "hangs" after hitting first "forward" button

  - by bumbling fool

  I've been trying to install Ubuntu but, no matter what I try (wifi connected, wifi not connected, disk blank, disk prepartitioned...), it just "hangs" at the first window (pick your language) with a non-stop hourglass after hitting "forward". This is on a Stinkpad T42. Shouldn't ubiquity at least tell me what's going on? I tried to find a log but /var/log/installer* isn't present. Initiating ubiquity from command line doesn't provide any debug info either. Even when using --debug or other combinations.

  Read the article

• Wireless very slow. Changed mode from Infracstructure to Ad-hoc

  - by Dan

  This is my first time using Linux so go easy on me :) I downloaded and installed Mint 11 couple of days ago and I was having trouble connecting to internet with wifi. Actually it says it connects but does not load any webpages. I tried to get help from this model of laptop owners (Asus G73SW) who uses mostly Ubuntu but they said they never had any problem right from install. So I decided to try out Ubuntu 11.04. Same thing. BUT now I get internet after going into Network Connection edit and changing the Mode from Infracstructure to Ad-Hoc. I get load pages but very slow. And if I'm not mistaken, as I was writing this paragraph, I might have been disconnected. However the wifi bar is full. Please help me this newb because I really want to keep using Ubuntu but I might just have to go back to W7 if nothing can be done. Thank you!

  Read the article

• dhcp configuration not working ubuntu 11.10

  - by Vivek Pradhan

  I am usually behind a proxy server in college so I connect to the ethernet or wifi using manual IPv4 addresses only inside college. I have been trying really hard to get the internet work at home, there is no proxy and I have set the network to use automatic dhcp. It seems like it is not able to connect to the port, It gets disconnected after some time automatically and then tries to reconnect. The same thing is happening with wifi networks also, after some time i see a pop up asking for authentication and ultimately its not able to connect. What might be the problem here. I looked up some similar questions and checked the /etc/network/interfaces file and looks like this: auto lo iface lo inet loopback I have no idea what those lines mean but there is no configuration for eth0 or wlan0. Any help is deeply appreciated. Ubuntu loses it charms due to these small glitches.

  Read the article

• Network sharing for android

  - by Shagun

  I am on ubuntu 12.04 and I want to create a wifi hotspot to be used with my android device. Now I know there are so many tutorials available every where and that I have all options in network tab to use but I couldn't get it to work. Android does not work with an adhoc connection and whatever wifi network I created, my android device could not connect to it (I could connect a phone using bada to it and other computers can also be connected) I know the work around to get android on a adhoc connection but can't I have some thing as simple as connectify for windows? PS : I am not looking for workarounds involving android.

  Read the article

• HP 530 Wireless problem. Bad communication with access point

  - by foxy

  I installed Ubuntu 11.10 on HP 530 and to make Wireless work installed STA driver from jockey (obviously proprietary) and, since it didn't work also installed their driver from HP website via ndiswrapper. After this (and a reboot) I see the WiFi indicator glowing, like it should be, and I am able to find local access points. But when I try to connect to mine personal one with WPA 2 security (with password) it hangs at authentification (I'm using wicd to manage wifi), and after a minute or so (I guess timeout of request happens) it says I have a wrong password (it is 100% correct). What might be the problem here? Yesterday I was able to connect to access point by changing type of encryption from passphrase to preshared key but didn't have internet access. Now, after reboot, I can't connect there again.

  Read the article

• How to suppress "Card not present / present" spam in syslog?

  - by vava

  I'm getting a lot of Dec 27 08:35:49 htpc kernel: [ 1552.153797] pciehp 0000:00:1c.5:pcie04: Card not present on Slot(0-2) Dec 27 08:35:49 htpc kernel: [ 1552.157744] pciehp 0000:00:1c.5:pcie04: Card present on Slot(0-2) messages in my syslog, about 10 every second. That just makes syslog unusable, can I somehow get rid of them? I don't know and don't really care about the reason of those messages being there, partly because my motherboard doesn't have pcie slots on it and partly because everything I care about works perfectly. That might be a WiFi chip I disabled in bios but hey, I don't want wifi to be powered on, I'm not using it. So can I just suppress those messages?

  Read the article

• Is there anyone with an Thinkpad Edge E320 with working Fn-Keys?

  - by Wauzl

  I recently bought a new Lenovo ThinkPad Edge E320. I'm having trouble with my Fn-Keys. The ones for Sound, Brightness and MUltimedia work but those that toggle Wifi/Bluetooth, Webcam and Microphone on and off won't. Fortunately the Wifi, Webcam and Mic are enabled by default. My problem is that I can't disable them (which would be nice to know that this works) and that I can't enable Bluetooth. (I checked that my machine has bluetooth support) Can't say if it would work in Windows as I purchased a machine without Windows. Here is my dmesg: http://pastebin.com/gAgYeDG7 Thanks for reading :)

  Read the article

• Pppoe wireless connection, Ubuntu 12.4

  - by Barbara

  I recently bought a new computer (Asus 1015 cx) with Ubuntu (12.4) as preinstalled system. My problem is with the internet. The computer connects just fine to the free wifi we have at home, but in college, we have a little bit different system. There is wifi, but it is not free - everyone receives a user name and a password. I cant manage to estabilish this Pppoe connection - the computer "sees" where can it connect, but I dont know where to write my username and password. It is not the DSL connection, what I have already tried. Can you help me?

  Read the article

• What software is responsible for connecting to the wireless net specified in /etc/network/interfaces?

  - by zuba

  I'm curious what software (package, utility in bin's) handle interface parameters in /etc/network/interfaces and decides to connect to the specified wireless net. I use wifi usb stick dlink DWL-110 attached to wlan0 with ndiswrapper driver. Sometimes wlan0 sees my wifi net - iwlist wlan0 scan shows it, but does not connect to it - iwconfig shows AP Not-Associated, until I replug the stick. Neither reinserting module with ndiswrapper, not ifdown/ifup or restarting networking helps. That is why I need to know what OS entity handles connection/reconnection to wireless net. EDIT: shame on me, I use wireless-tool package with wep encryption

  Read the article

• Is there a way to suppress one specific message from syslog?

  - by vava

  I'm getting a lot of Dec 27 08:35:49 htpc kernel: [ 1552.153797] pciehp 0000:00:1c.5:pcie04: Card not present on Slot(0-2) Dec 27 08:35:49 htpc kernel: [ 1552.157744] pciehp 0000:00:1c.5:pcie04: Card present on Slot(0-2) messages in my syslog, about 10 every second. That just makes syslog unusable, can I somehow get rid of them? I don't know and don't really care about the reason of those messages being there, partly because my motherboard doesn't have pcie slots on it and partly because everything I care about works perfectly. That might be a WiFi chip I disabled in bios but hey, I don't want wifi to be powered on, I'm not using it. So can I just suppress those messages?

  Read the article

• If I enable/disable my wireless device, my computer will panic

  - by Yinyanghu

  Now, I use Debian 6.0.6 instead of Fedora 16/17. But I still sustain the problem of my wireless problem. If I enable/disable my laptop wireless device or my usb wifi adaptor, my laptop will panic. It seems like all the processes stop at that time and I have to restart my laptop directly. P.S. I think I installed the drivers correctly and the linux kernel may have some bugs. For example, when I unplug my usb wifi adaptor or I use this command, ifdown wlan0 I encounter this problem. Wireless Device: PCI: 03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) USB: Bus 002 Device 005: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• Broadcom bcm4313 Ubuntu 13.10 connection time out

  - by Wahtever

  After upgrading to Ubuntu 13.10 I keep getting connection timed out every few seconds at which point i have to disconnect and reconnect to the WiFi network. The WiFi card worked fine on 13.04 with the bcmwl-kernel-source installed but giving problems on 13.10: *-network description: Wireless interface product: BCM4313 802.11bgn Wireless Network Adapter vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: c0:14:3d:cc:c9:c7 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.4 latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f0500000-f0503fff How can i fix this? Thanks

  Read the article

• bridge network using route

  - by wannabe

  I have been googeling and searching on how to do bridge my wifi connections to my internet connection using route. I have a ubuntu server 12.04 with a wifi and normal network card I also have a router that is connected to the internet on my ubuntu server i have eth0 connected to the router; IP 192.168.1.12 GW 192.168.1.1 DNS 212.54.40.25 this all works great I have set up my wlan0 as my accespoint, and DHCP to feed an IP to any device that connects to it. if i connect, for example, my android smartphone to my wlan0 acces point it will get the following IP 10.10.0.2 GW 10.10.0.1 DNS 212.54.40.25 How in earth can I bridge this connection and acces the internet from my android? I dont want to make use of BR0 bridge-utils but accomplish this using route. Many thanks in advance

  Read the article

• access to site owner not working

  - by Daveo

  I made a website it works for everyone except for the site owner, who cannot access the site. He gets a server could not be found error. I went to his house and the issue occurs for all of his devices (PC, laptop, iPhone using WiFi) when I turn WiFi off the iPhone it works. So I thought it was a problem on his router so I reset is router to default factory settings but it still does not work, I have flushed his DNS cache and his browser cache. But nothing seems to help. He cannot even PING the server using the domain name. However when he uses the IP address he can see the site fine. I looked in cpanel for an blocked IP addresses but cannot see anything. What could be stopping just him from accessing the site via domainname and not the IP address? Site details are: PHP, osCommerce it is hosted by site5 on my reseller account.

  Read the article

• How to set up a local webDAV server for use with Goodreader on the ipad? [migrated]

  - by confused-about-webdav

  I need to know how to set up a local webDav server on my PC so that goodreader on ipad can automatically sync with it over the local wifi network? I am really a rookie when it comes to setting up a web server and have tried various guides on the internet. I tried setting up a webdav server using IIS and forwarded the required ports and enabled webdav publishing but goodreader can find it in the local wifi network automatically nor is it able to connect even after manually entering the credendtials. So i'll be really greateful if someone who has successfully setup a webdav server for use with goodreader can point me on how to do it?

  Read the article

• BCM4313 partially working on Toshiba Satellite R630 (Ubuntu 12.10)

  - by Denis

  New to Ubuntu. During installation, the computer identified the wifi card and asked me to connect to the network. I did. After the first restart the wifi was working and I could see networks and connect to them. After the second restart the wireless has VANISHED. Still, the Broadcom STA drivers are enabled in system settings/additional drivers. Tried to restart 5 more times- no effect. I have studied very many topics on askubuntu but none of them work.

  Read the article

• knetworkmanager not starting at all

  - by yoshi

  It seems that my knetworkmanager is not starting anymore. Read: In KDE4's sys tray I don't have a icon to manage my networks. Also when starting it from terminal or kick off menu literally "nothing" happens. I don't know what's wrong with it. Sadly after reading this answer on superuser.com it seems I can not connect to wifi via iwconfig 'cause my network is WPA2 encrypted. (Basically I can not set they passphrase - invalid argumenterror.) So it seems I've to get knetworkmanger running again as I also can't download other tools. I've tried stuff like sudo service network-manager restart but it didn't seem to help. I'm kinda puzzled so any help for this would be appreciated. PS: If it hasn't become clear: The whole drama of is simply I can't connect to wifi and internet :o)

  Read the article

• How do I turn off WLAN automatically when LAN is connected?

  - by derroman

  I use my Thinkpad laptop with a docking station. The docking station is connected to my router via LAN. When I walk around the house I use my laptop with WLAN. Is it possible (and how) to manage these devices with a script or something to work like this: If a LAN-Connection is up, the OS should turn off Wifi and if LAN-Connection gets lost (undocking) Wifi should turn on automatically. I use Ubuntu 11.04 64bit with Gnome 2. The system works on an Lenovo ThinkPad R500 with. WLAN-Device: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] LAN-Device: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) Any help would be appreciated. Thanks.

  Read the article

• Is it possible to put software in a queue to be installed later?

  - by Gourik Goswami

  Sometime I find some software that is interesting and want to install it. At office I use pocket WiFi so I do not want to download big files. I want some how to tag these files so I can install them later when I am at home at connected with wifi network (More faster network). So is there any way that these software installation can be put in a queue, so that when I am at home it can start right away. Is there any way to do this?

  Read the article

• How do I get the wireless card on a Lenovo S205 working?

  - by user206829

  I tried to install 12.04, 13.04, and now 13.10 on the machine and followed all the instructions that made sense that I could find and still have not gotten wifi to work. It keeps it hard blocked for some reason, not sure why and not sure anyone out there either has figured it out because I would have found it on Google. When I boot from the formatted USB drive, I have WiFi and everything working, why doesn't work after the USB drive is removed? What driver is the USB/wubi or whatever using so that I can install it and have things working? I could have used wubi and installed Ubuntu like that, but I want to make this machine a fully dedicated Ubuntu machine. The laptop is a Lenovo S205 in case anyone can help. I really would like to use 12.04 or higher, i don't want to downgrade to an older version of Ubuntu if at all possible.

  Read the article

• Filtered Router Interface

  - by jviotti

  I'm having some problems with a Scientific-Atlanta DPR2320R2. In specific with the WIFI. A few months ago I changed its password and username and now I can't remember. So I tried cracking it with Hydra but it drove things worse. Content of webadmin was rendered partial, and threw lot of errors. I then reseted the router. I found myself abled to browse the web with ethernet-connected pc. Wifi is configured by registering the device's MAC Address, and indeed the router has been reseted and register MAC address were lost. No device could connect to wifi. In fact, the device does not even recognize the network. I tried the pointing to 192.168.0.1 to restablish the MAC's. But I couldn't connect to the router access point. Tried listing up hosts: $ nmap -sP 192.168.0.0/24 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:18 ART Host 192.168.0.1 is up (0.0018s latency). Host 192.168.0.11 is up (0.00025s latency). Nmap done: 256 IP addresses (2 hosts up) scanned in 59.62 seconds Then checked 192.168.0.1 was really up by sending pings. It responded to all my pings. I quick-scanned the access point: $ nmap 192.168.0.1 Starting Nmap 5.00 ( http://nmap.org ) at 2012-12-11 01:08 ART Interesting ports on 192.168.0.1: Not shown: 999 closed ports PORT STATE SERVICE 80/tcp filtered http Nmap done: 1 IP address (1 host up) scanned in 6.73 seconds Look the state of the port 80: FILTERED. I'm pretty confused now. Any suggestion would be appreciated. Thanks in advance.

  Read the article

• Port Forwarding(?) TD-W8961nd

  - by rich

  I have a bit of a weird internet setup. I am connected via a decent WiFi connection (from work) which I pick up using a Buffalo Airstation Wireless-G box. This simply picks up the signal and gives me 4 ethernet ports to connect to. That's all fine and works as it should. I also have a TP LINK TD-W8961nd router which used to be connected to the Airstation via an ethernet cable so I could essentially have WiFi access in my house. To cut a long story short I can't remember how the hell I got it to work and I can't find the notes I scribbled down on how to do it. I'm pretty sure I need to tell the router what ip to pick up the internet connection from and have the local wifi as a seperate network. How the hell I do that I have no idea right now. Can anyone give me some advice on this? If you need more information ask and I will be able to do so. Cheers in advance. edit I'm in work at the moment so I can't give 100% details but I will be able to later on.

  Read the article

• Change Laptop Wireless Card?

  - by Craig

  I have just bought a new Samsung RV511 Laptop (the i5 Version). Anyway it comes installed with a Broadcom Wifi Card, I have a Super Atheros Mini Wifi Card that I would like to swap for the Broadcom one. I use Atheros for security auditing purposes in Linux that the Broadcom one is not good for. Trouble is I have never got to the barebones of a laptop, although I am a Custom PC Builder, laptops i generally have no concern for. Take a look at this picture, I took one back panel off to reveal some of the components: I believe the Wireless Card is where I marked the arrow pointing too. That little white square thing appears to be a sticker of the Wifi card, it says WLAN. How can I access it to swap it with my Atheros one. Do I need to remove all the outermost screws? There are screws located to the right of where I scribbled in Yellow and next to the HDD, do I just remove those? I dont want to destroy the machine, only just got it today. Appreciate some help thanks.

  Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >