Search Results

Search found 26124 results on 1045 pages for 'unreal development kit'.

Page 410/1045 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

  • How to limit click'n'drag movement to an area?

    - by Vexille
    I apologize for the somewhat generic title. I'm really don't have much clue about how to accomplish what I'm trying to do, which is making it harder even to research a possible solution. I'm trying to implement a path marker of sorts (maybe there's a most suitable name for it, but this is the best I could come up with). In front of the player there will be a path marker, which will determine how the player will move once he finishes planning his turn. The player may click and drag the marker to the position they choose, but the marker can only be moved within a defined working area (the gray bit). So I'm now stuck with two problems: First of all, how exactly should I define that workable area? I can imagine maybe two vectors that have the player as a starting point to form the workable angle, and maybe those two arcs could come from circles that have their center where the player is, but I definetly don't know how to put this all together. And secondly, after I've defined the area where the marker can be placed, how can I enforce that the marker should only stay within that area? For example, if the player clicks and drags the marker around, it may move freely within the working area, but must not leave the boundaries of the area. So for example, if the player starts dragging the marker upwards, it will move upwards until it hits he end of the working area (first diagram below), but if after that the player starts dragging sideways, the marker must follow the drag while still within the area (second diagram below). I hope this wasn't all too confusing. Thanks, guys.

    Read the article

  • Undefined fireball movement behavior

    - by optimisez
    Demonstration video I try to do after the player shoot 10 times of fireball, then delete all the fireball objects and recreate a 10 new set of fireball objects. I did it but there is a weird bug happens that sometimes the fireball will come out from top and move to the right after shooting a few times. All the 10 fireballs should follow the player all the time and all the fireball should come out from player even after a new set of fireballs is recreated. Any ideas to fix it? Variables typedef struct gameObject{ float X; float Y; int length; int height; bool action; }; // Fireball #define FIREBALL_NUM 10 LPDIRECT3DTEXTURE9 fireball = NULL; RECT fireballRect; gameObject *fireballDest = new gameObject[FIREBALL_NUM]; int iFireBallAnimation; int fireballCount = 0; Set up Fireball void setUpFireBall() { // Initialize destination rectangle, rectangle height and length for (int i = 0; i < FIREBALL_NUM; i++) { fireballDest[i].X = 0; fireballDest[i].Y = 0; fireballDest[i].length = fireballRect.right - fireballRect.left; fireballDest[i].height = fireballRect.bottom - fireballRect.top; } iFireBallAnimation = fireballRect.right - fireballRect.left; // Initialize boolean for (int i = 0; i < FIREBALL_NUM; i++) { fireballDest[i].action = false; } } Initialize fireball void initFireball() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "fireball.png", 512, 512, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 0), NULL, NULL, &fireball); // Initialize source rectangle fireballRect.left = 0; fireballRect.top = 256; fireballRect.right = 64; fireballRect.bottom = 320; setUpFireBall(); } Update fireball void update() { updateAnimation(); updateAI(); updatePhysics(); updateGameState(); } void updatePhysics() { motion(); collison(); } void motion() { playerMove(); playerJump(); playerGravity(); shootFireball(); fireballFollowPlayer(); } void shootFireball() { if (keyArr['Z']) fireballDest[fireballCount].action = true; if (fireballDest[fireballCount].action) { fireballDest[fireballCount].X += 10; if (fireballDest[fireballCount].X > 800) fireballCount++; } } void fireballFollowPlayer() { for (int i = 0; i < FIREBALL_NUM; i++) { if (fireballDest[i].action == false) { fireballDest[i].X = playerDest.X - 30; fireballDest[i].Y = playerDest.Y - 14; } } } void updateGameState() { // When no more fireball left, rearm fireball if (fireballCount == FIREBALL_NUM) { delete[] fireballDest; fireballDest = new gameObject[10]; fireballCount = 0; setUpFireBall(); } } Render fireball void renderFireball() { for (int i = 0; i < FIREBALL_NUM; i++) { if (fireballDest[i].action) sprite->Draw(fireball, &fireballRect, NULL, &D3DXVECTOR3(fireballDest[i].X, fireballDest[i].Y, 0), D3DCOLOR_XRGB(255,255, 255)); } }

    Read the article

  • Largest sphere inside a frustum

    - by Will
    How do you find the largest sphere that you can draw in perspective? Viewed from the top, it'd be this: Added: on the frustum on the right, I've marked four points I think we know something about. We can unproject all eight corners of the frusum, and the centres of the near and far ends. So we know point 1, 3 and 4. We also know that point 2 is the same distance from 3 as 4 is from 3. So then we can compute the nearest point on the line 1 to 4 to point 2 in order to get the centre? But the actual math and code escapes me. I want to draw models (which are approximately spherical and which I have a miniball bounding sphere for) as large as possible. Update: I've tried to implement the incircle-on-two-planes approach as suggested by bobobobo and Nathan Reed : function getFrustumsInsphere(viewport,invMvpMatrix) { var midX = viewport[0]+viewport[2]/2, midY = viewport[1]+viewport[3]/2, centre = unproject(midX,midY,null,null,viewport,invMvpMatrix), incircle = function(a,b) { var c = ray_ray_closest_point_3(a,b); a = a[1]; // far clip plane b = b[1]; // far clip plane c = c[1]; // camera var A = vec3_length(vec3_sub(b,c)), B = vec3_length(vec3_sub(a,c)), C = vec3_length(vec3_sub(a,b)), P = 1/(A+B+C), x = ((A*a[0])+(B*a[1])+(C*a[2]))*P, y = ((A*b[0])+(B*b[1])+(C*b[2]))*P, z = ((A*c[0])+(B*c[1])+(C*c[2]))*P; c = [x,y,z]; // now the centre of the incircle c.push(vec3_length(vec3_sub(centre[1],c))); // add its radius return c; }, left = unproject(viewport[0],midY,null,null,viewport,invMvpMatrix), right = unproject(viewport[2],midY,null,null,viewport,invMvpMatrix), horiz = incircle(left,right), top = unproject(midX,viewport[1],null,null,viewport,invMvpMatrix), bottom = unproject(midX,viewport[3],null,null,viewport,invMvpMatrix), vert = incircle(top,bottom); return horiz[3]<vert[3]? horiz: vert; } I admit I'm winging it; I'm trying to adapt 2D code by extending it into 3 dimensions. It doesn't compute the insphere correctly; the centre-point of the sphere seems to be on the line between the camera and the top-left each time, and its too big (or too close). Is there any obvious mistakes in my code? Does the approach, if fixed, work?

    Read the article

  • Maya .IFF plugins for Gimp

    - by Kara Marfia
    Maya's preferred format for saving off a UV Snapshot is its own .IFF format, so I was hoping to find a plugin allowing Gimp 2 (Windows) to read it. I've found plenty of plugins for different linux distros, but none are win-friendly (that I can discern - admittedly I'm no whiz with Gimp). Does anyone know of one? Alternately, .tiff seems to work just fine, so if there's no good reason to bother fiddling with IFFs, I'd appreciate the input there, too. (sorry if this isn't on-topic)

    Read the article

  • how can I specify interleaved vertex attributes and vertex indices

    - by freefallr
    I'm writing a generic ShaderProgram class that compiles a set of Shader objects, passes args to the shader (like vertex position, vertex normal, tex coords etc), then links the shader components into a shader program, for use with glDrawArrays. My vertex data already exists in a VertexBufferObject that uses the following data structure to create a vertex buffer: class CustomVertex { public: float m_Position[3]; // x, y, z // offset 0, size = 3*sizeof(float) float m_TexCoords[2]; // u, v // offset 3*sizeof(float), size = 2*sizeof(float) float m_Normal[3]; // nx, ny, nz; float colour[4]; // r, g, b, a float padding[20]; // padded for performance }; I've already written a working VertexBufferObject class that creates a vertex buffer object from an array of CustomVertex objects. This array is said to be interleaved. It renders successfully with the following code: void VertexBufferObject::Draw() { if( ! m_bInitialized ) return; glBindBuffer( GL_ARRAY_BUFFER, m_nVboId ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, m_nVboIdIndex ); glEnableClientState( GL_VERTEX_ARRAY ); glEnableClientState( GL_TEXTURE_COORD_ARRAY ); glEnableClientState( GL_NORMAL_ARRAY ); glEnableClientState( GL_COLOR_ARRAY ); glVertexPointer( 3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 0) ); glTexCoordPointer(3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 12)); glNormalPointer(GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 20)); glColorPointer(3, GL_FLOAT, sizeof(CustomVertex), ((char*)NULL + 32)); glDrawElements( GL_TRIANGLES, m_nNumIndices, GL_UNSIGNED_INT, ((char*)NULL + 0) ); glDisableClientState( GL_VERTEX_ARRAY ); glDisableClientState( GL_TEXTURE_COORD_ARRAY ); glDisableClientState( GL_NORMAL_ARRAY ); glDisableClientState( GL_COLOR_ARRAY ); glBindBuffer( GL_ARRAY_BUFFER, 0 ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, 0 ); } Back to the Vertex Array Object though. My code for creating the Vertex Array object is as follows. This is performed before the ShaderProgram runtime linking stage, and no glErrors are reported after its steps. // Specify the shader arg locations (e.g. their order in the shader code) for( int n = 0; n < vShaderArgs.size(); n ++) glBindAttribLocation( m_nProgramId, n, vShaderArgs[n].sFieldName.c_str() ); // Create and bind to a vertex array object, which stores the relationship between // the buffer and the input attributes glGenVertexArrays( 1, &m_nVaoHandle ); glBindVertexArray( m_nVaoHandle ); // Enable the vertex attribute array (we're using interleaved array, since its faster) glBindBuffer( GL_ARRAY_BUFFER, vShaderArgs[0].nVboId ); glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, vShaderArgs[0].nVboIndexId ); // vertex data for( int n = 0; n < vShaderArgs.size(); n ++ ) { glEnableVertexAttribArray(n); glVertexAttribPointer( n, vShaderArgs[n].nFieldSize, GL_FLOAT, GL_FALSE, vShaderArgs[n].nStride, (GLubyte *) NULL + vShaderArgs[n].nFieldOffset ); AppLog::Ref().OutputGlErrors(); } This doesn't render correctly at all. I get a pattern of white specks onscreen, in the shape of the terrain rectangle, but there are no regular lines etc. Here's the code I use for rendering: void ShaderProgram::Draw() { using namespace AntiMatter; if( ! m_nShaderProgramId || ! m_nVaoHandle ) { AppLog::Ref().LogMsg("ShaderProgram::Draw() Couldn't draw object, as initialization of ShaderProgram is incomplete"); return; } glUseProgram( m_nShaderProgramId ); glBindVertexArray( m_nVaoHandle ); glDrawArrays( GL_TRIANGLES, 0, m_nNumTris ); glBindVertexArray(0); glUseProgram(0); } Can anyone see errors or omissions in either the VAO creation code or rendering code? thanks!

    Read the article

  • 2D Tile Based Collision Detection

    - by MrPlosion1243
    There are a lot of topics about this and it seems each one addresses a different problem, this topic does the same. I was looking into tile collision detection and found this where David Gouveia explains a great way to get around the person's problem by separating the two axis. So I implemented the solution and it all worked perfectly from all the testes I through at it. Then I implemented more advanced platforming physics and the collision detection broke down. Unfortunately I have not been able to get it to work again which is where you guys come in :)! I will present the code first: public void Update(GameTime gameTime) { if(Input.GetKeyDown(Keys.A)) { velocity.X -= moveAcceleration; } else if(Input.GetKeyDown(Keys.D)) { velocity.X += moveAcceleration; } if(Input.GetKeyDown(Keys.Space)) { if((onGround && isPressable) || (!onGround && airTime <= maxAirTime && isPressable)) { onGround = false; airTime += (float)gameTime.ElapsedGameTime.TotalSeconds; velocity.Y = initialJumpVelocity * (1.0f - (float)Math.Pow(airTime / maxAirTime, Math.PI)); } } else if(Input.GetKeyReleased(Keys.Space)) { isPressable = false; } if(onGround) { velocity.X *= groundDrag; velocity.Y = 0.0f; } else { velocity.X *= airDrag; velocity.Y += gravityAcceleration; } velocity.Y = MathHelper.Clamp(velocity.Y, -maxFallSpeed, maxFallSpeed); velocity.X = MathHelper.Clamp(velocity.X, -maxMoveSpeed, maxMoveSpeed); position += velocity * (float)gameTime.ElapsedGameTime.TotalSeconds; position = new Vector2((float)Math.Round(position.X), (float)Math.Round(position.Y)); if(Math.Round(velocity.X) != 0.0f) { HandleCollisions2(Direction.Horizontal); } if(Math.Round(velocity.Y) != 0.0f) { HandleCollisions2(Direction.Vertical); } } private void HandleCollisions2(Direction direction) { int topTile = (int)Math.Floor((float)Bounds.Top / Tile.PixelTileSize); int bottomTile = (int)Math.Ceiling((float)Bounds.Bottom / Tile.PixelTileSize) - 1; int leftTile = (int)Math.Floor((float)Bounds.Left / Tile.PixelTileSize); int rightTile = (int)Math.Ceiling((float)Bounds.Right / Tile.PixelTileSize) - 1; for(int x = leftTile; x <= rightTile; x++) { for(int y = topTile; y <= bottomTile; y++) { Rectangle tileBounds = new Rectangle(x * Tile.PixelTileSize, y * Tile.PixelTileSize, Tile.PixelTileSize, Tile.PixelTileSize); Vector2 depth; if(Tile.IsSolid(x, y) && Intersects(tileBounds, direction, out depth)) { if(direction == Direction.Horizontal) { position.X += depth.X; } else { onGround = true; isPressable = true; airTime = 0.0f; position.Y += depth.Y; } } } } } From the code you can see when velocity.X is not equal to zero the HandleCollisions() Method is called along the horizontal axis and likewise for the vertical axis. When velocity.X is not equal to zero and velocity.Y is equal to zero it works fine. When velocity.Y is not equal to zero and velocity.X is equal to zero everything also works fine. However when both axis are not equal to zero that's when it doesn't work and I don't know why. I basically teleport to the left side of a tile when both axis are not equal to zero and there is a air block next to me. Hopefully someone can see the problem with this because I sure don't as far as I'm aware nothing has even changed from what I'm doing to what the linked post's solution is doing. Thanks.

    Read the article

  • Anisotropic and trilinear filtering?

    - by fedab
    I'm confused about the usage of trilinear filtering and anisotropic filtering in SharpDX. As far as i understood, trilinear filtering does linear filtering to the textures and in a case of LOD-change it also interpolates between the too LODs to smooth the transition. Anisotropic filtering make the texture bigger. Now it is possible to use trilinear filtering to do the same thing, due to anisotropic filtering with bigger textures. This causes a lesser blurred image, when you use anisotropy, because the interpolation is better. Now, it should be possible to use trilinear filtering and anisotropic filtering at the same time. But in the SamplerState i can only choose Filter.Anisotropy or Filter.MinMagMipLinear (should be trilinear, right?). You can see all possible filters here: D3D11 Filter Enumeration. So my question: Can you use both techniques together, if yes, how can i archieve that in SharpDX with SamplerState?

    Read the article

  • problem adding bumpmap to textured gluSphere in JOGL

    - by ChocoMan
    I currently have one texture on a gluSphere that represents the Earth being displayed perfectly, but having trouble figuring out how to implement a bumpmap as well. The bumpmap resides in "res/planet/earth/earthbump1k.jpg".Here is the code I have for the regular texture: gl.glTranslatef(xPath, 0, yPath + zPos); gl.glColor3f(1.0f, 1.0f, 1.0f); // base color for earth earthGluSphere = glu.gluNewQuadric(); colorTexture.enable(); // enable texture colorTexture.bind(); // bind texture // draw sphere... glu.gluDeleteQuadric(earthGluSphere); colorTexture.disable(); // texturing public void loadPlanetTexture(GL2 gl) { InputStream colorMap = null; try { colorMap = new FileInputStream("res/planet/earth/earthmap1k.jpg"); TextureData data = TextureIO.newTextureData(colorMap, false, null); colorTexture = TextureIO.newTexture(data); colorTexture.getImageTexCoords(); colorTexture.setTexParameteri(GL2.GL_TEXTURE_MAG_FILTER, GL2.GL_LINEAR); colorTexture.setTexParameteri(GL2.GL_TEXTURE_MIN_FILTER, GL2.GL_NEAREST); colorMap.close(); } catch(IOException e) { e.printStackTrace(); System.exit(1); } // Set material properties gl.glTexParameteri(GL2.GL_TEXTURE_2D, GL2.GL_TEXTURE_MAG_FILTER, GL2.GL_LINEAR); gl.glTexParameteri(GL2.GL_TEXTURE_2D, GL2.GL_TEXTURE_MIN_FILTER, GL2.GL_NEAREST); colorTexture.setTexParameteri(GL2.GL_TEXTURE_2D, GL2.GL_TEXTURE_WRAP_S); colorTexture.setTexParameteri(GL2.GL_TEXTURE_2D, GL2.GL_TEXTURE_WRAP_T); } How would I add the bumpmap as well to the same gluSphere?

    Read the article

  • XNA - Finding boundaries in isometric tilemap

    - by Yheeky
    I have an issue with my 2D isometric engine. I'm using my own 2D camera class which works with matrices and need to find the tilemaps boundaries so the user always sees the map. Currently my map size is 100x100 (with 128x128 tiles) so the calculation (e.g. for the right boundary) is: var maxX = (TileMap.MapWidth + 1) * (TileMap.TileWidth / 2) - ViewSize.X; var maxX = (100 + 1) * (128 / 2) - 1360; // = 5104 pixels. This works fine while having scale factor of 1.0f but not for any other zoom factor. When I zoom out to 0.9f the right border should be at approx. 4954. I´m using the following code for transformation but I always get a wrong value: var maxXVector = new Vector2(maxX, 0); var maxXTransformed = Vector2.Transform(maxXVector, tempTransform).X; The result is 4593. Does anyone of you have an idea what I´m during wrong? Thanks for your help! Yheeky

    Read the article

  • 2D pathfinding - finding smooth paths

    - by Kooi Nam Ng
    I was trying to implement a simple pathfinding, but the outcome is less satisfactory than what I intended to achieve. The thing is units in games like Starcraft 2 move in all directions whereas units in my case only move in at most 8 directions (Warcraft 1 style) as these 8 directions direct to next available nodes (they move from a tile to next neighboring tile). What should I do in order to achieve the result as in Starcraft 2? Shrink the tile size? On the picture you can see a horizontal line of rock tiles being obstacles, and the found path marked as green tiles. The red line is the path I want to achieve.

    Read the article

  • Doing powerups in a component-based system

    - by deft_code
    I'm just starting really getting my head around component based design. I don't know what the "right" way to do this is. Here's the scenario. The player can equip a shield. The the shield is drawn as bubble around the player, it has a separate collision shape, and reduces the damage the player receives from area effects. How is such a shield architected in a component based game? Where I get confused is that the shield obviously has three components associated with it. Damage reduction / filtering A sprite A collider. To make it worse different shield variations could have even more behaviors, all of which could be components: boost player maximum health health regen projectile deflection etc Am I overthinking this? Should the shield just be a super component? I really think this is wrong answer. So if you think this is the way to go please explain. Should the shield be its own entity that tracks the location of the player? That might make it hard to implement the damage filtering. It also kinda blurs the lines between attached components and entities. Should the shield be a component that houses other components? I've never seen or heard of anything like this, but maybe it's common and I'm just not deep enough yet. Should the shield just be a set of components that get added to the player? Possibly with an extra component to manage the others, e.g. so they can all be removed as a group. (accidentally leave behind the damage reduction component, now that would be fun). Something else that's obvious to someone with more component experience?

    Read the article

  • cross resolution level design advice [on hold]

    - by Mike
    I was looking for some beginner advice regarding level design across multiple resolutions. I believe the answer is likely "it depends", but any input from anyone with real experience is very appreciated. Basically, I am building a 2D Super Metroid type game. If rooms/levels are to be a tiled grid, what are some general best practices for designing rooms when taking into account different resolutions? Since more or less tiles could fit vertically on a single screen depending on the resolution, is it better to design towards possibly having more of the room visible depending on the screen (with a bare minimum needed for gameplay), or should I fix the design at a certain tile height and scale the graphics?

    Read the article

  • How to choose cell to put entity in in an uniform grid used for broad phase collision detection?

    - by nathan
    I'm trying to implement the broad phase of my collision detection algorithm. My game is an arcade game with lot of moving entities in an open space with relatively equivalent sizes. Regarding the above specifications, i decided to use an uniform grid for space partitioning. The problem i have right know is how to efficiently choose in which cells an entity should be added. ATM i'm doing something like this: for (int x = 0; x < gridSize; x++) { for (int y = 0; y < gridSize; y++) { GridCell cell = grid[x][y]; cell.clear(); //remove the previously added entities for (int i = 0; i < entities.size(); i++) { Entity e = entities.get(i); if (cell.isEntityOverlap(e)) { cell.add(e); } } } } The isEntityOverlap is a simple method i added my GridCell class. public boolean isEntityOverlap(Shape s) { return cellArea.intersects(s); } Where cellArea is a Rectangle. cellArea = new Rectangle(x, y, CollisionGrid.CELL_SIZE, CollisionGrid.CELL_SIZE); It works but it's damn slow. What would be a fast way to know all the cells an entity overlaps? Note: by "it works" i mean, the entities are contained in the good cells over the time after movements etc.

    Read the article

  • OpenGL: Filtering/antialising textures in a 2D game

    - by futlib
    I'm working on a 2D game using OpenGL 1.5 that uses rather large textures. I'm seeing aliasing effects and am wondering how to tackle those. I'm finding lots of material about antialiasing in 3D games, but I don't see how most of that applies to 2D games - e.g. antisoptric filtering seems to make no sense, FSAA doesn't sound like the best bet either. I suppose this means texture filtering is my best option? Right now I'm using bilinear filtering, I think: glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); From what I've read, I'd have to use mipmaps to use trilinear filtering, which would drive memory usage up, so I'd rather not. I know the final sizes of all the textures when they are loaded, so can't I somehow size them correctly at that point? (Using some form of texture filtering).

    Read the article

  • How can I view an R32G32B32 texture?

    - by bobobobo
    I have a texture with R32G32B32 floats. I create this texture in-program on D3D11, using DXGI_FORMAT_R32G32B32_FLOAT. Now I need to see the texture data for debug purposes, but it will not save to anything but dds, showing the error in debug output, "Can't find matching WIC format, please save this file to a DDS". So, I write it to DDS but I can't open it now! The DirectX texture tool says "An error occurred trying to open that file". I know the texture is working because I can read it in the GPU and the colors seem correct. How can I view an R32G32B32 texture in an image viewer?

    Read the article

  • Cocos2d and Body with few collision shapes using chipmunk

    - by Eimantas
    I'm using Cocos2d (0.99.5) with chipmunk physics engine. Currently I'm trying to place a body into space which is combined from few circle shapes. Let's say I have a corresponding sprite image with displays atom (nucleus + 3 electrons around it. Something like this without orbit lines). In it's simplest form - only one circle shape at the center should be enough which would detect collisions from other objects with nucleus. Now I'd like to add other circle shapes for each electron. How can I do that? Now when I add those shapes to the body and add the body into chipmunk space - the shapes (together with the body/sprite) start flickering and spinning with no recognizable pattern (or reason for that matter).

    Read the article

  • Double sides face with two normals

    - by Marnix
    I think this isn't possible, but I just want to check this: Is it possible to create a face in opengl that has two normals? So: I want the inside and outside of some cilinder to be drawn, but I want the lights to do as expected and not calculate it for the normal given. I was trying to do this with backface culling off, so I would have both faces, but the light was wrongly calculated of course. Is this possible, or do I have to draw an inside and an outside? So draw twice?

    Read the article

  • 2D Platformer Collision Handling

    - by defender-zone
    Hello, everyone! I am trying to create a 2D platformer (Mario-type) game and I am some having some issues with handling collisions properly. I am writing this game in C++, using SDL for input, image loading, font loading, etcetera. I am also using OpenGL via the FreeGLUT library in conjunction with SDL to display graphics. My method of collision detection is AABB (Axis-Aligned Bounding Box), which is really all I need to start with. What I need is an easy way to both detect which side the collision occurred on and handle the collisions properly. So, basically, if the player collides with the top of the platform, reposition him to the top; if there is a collision to the sides, reposition the player back to the side of the object; if there is a collision to the bottom, reposition the player under the platform. I have tried many different ways of doing this, such as trying to find the penetration depth and repositioning the player backwards by the penetration depth. Sadly, nothing I've tried seems to work correctly. Player movement ends up being very glitchy and repositions the player when I don't want it to. Part of the reason is probably because I feel like this is something so simple but I'm over-thinking it. If anyone thinks they can help, please take a look at the code below and help me try to improve on this if you can. I would like to refrain from using a library to handle this (as I want to learn on my own) or the something like the SAT (Separating Axis Theorem) if at all possible. Thank you in advance for your help! void world1Level1CollisionDetection() { for(int i; i < blocks; i++) { if (de2dCheckCollision(ball,block[i],0.0f,0.0f)==true) { int up = 0; int left = 0; int right = 0; int down = 0; if(ball.coords[0] < block[i].coords[0] && block[i].coords[0] < ball.coords[2] && ball.coords[2] < block[i].coords[2]) { left = 1; } if(block[i].coords[0] < ball.coords[0] && ball.coords[0] < block[i].coords[2] && block[i].coords[2] < ball.coords[2]) { right = 1; } if(ball.coords[1] < block[i].coords[1] && block[i].coords[1] < ball.coords[3] && ball.coords[3] < block[i].coords[3]) { up = 1; } if(block[i].coords[1] < ball.coords[1] && ball.coords[1] < block[i].coords[3] && block[i].coords[3] < ball.coords[3]) { down = 1; } cout << left << ", " << right << ", " << up << ", " << down << ", " << endl; if (left == 1) { ball.coords[0] = block[i].coords[0] - 16.0f; ball.coords[2] = block[i].coords[0] - 0.0f; } if (right == 1) { ball.coords[0] = block[i].coords[2] + 0.0f; ball.coords[2] = block[i].coords[2] + 16.0f; } if (down == 1) { ball.coords[1] = block[i].coords[3] + 0.0f; ball.coords[3] = block[i].coords[3] + 16.0f; } if (up == 1) { ball.yspeed = 0.0f; ball.gravity = 0.0f; ball.coords[1] = block[i].coords[1] - 16.0f; ball.coords[3] = block[i].coords[1] - 0.0f; } } if (de2dCheckCollision(ball,block[i],0.0f,0.0f)==false) { ball.gravity = -0.5f; } } } To explain what some of this code means: The blocks variable is basically an integer that is storing the amount of blocks, or platforms. I am checking all of the blocks using a for loop, and the number that the loop is currently on is represented by integer i. The coordinate system might seem a little weird, so that's worth explaining. coords[0] represents the x position (left) of the object (where it starts on the x axis). coords[1] represents the y position (top) of the object (where it starts on the y axis). coords[2] represents the width of the object plus coords[0] (right). coords[3] represents the height of the object plus coords[1] (bottom). de2dCheckCollision performs an AABB collision detection. Up is negative y and down is positive y, as it is in most games. Hopefully I have provided enough information for someone to help me successfully. If there is something I left out that might be crucial, let me know and I'll provide the necessary information. Finally, for anyone who can help, providing code would be very helpful and much appreciated. Thank you again for your help!

    Read the article

  • Node.js Lockstep Multiplayer Architecture

    - by Wakaka
    Background I'm using the lockstep model for a multiplayer Node.js/Socket.IO game in a client-server architecture. User input (mouse or keypress) is parsed into commands like 'attack' and 'move' on the client, which are sent to the server and scheduled to be executed on a certain tick. This is in contrast to sending state data to clients, which I don't wish to use due to bandwidth issues. Each tick, the server will send the list of commands on that tick (possibly empty) to each client. The server and all clients will then process the commands and simulate that tick in exactly the same way. With Node.js this is actually quite simple due to possibility of code sharing between server and client. I'll just put the deterministic simulator in the /shared folder which can be run by both server and client. The server simulation is required so that there is an authoritative version of the simulation which clients cannot alter. Problem Now, the game has many entity classes, like Unit, Item, Tree etc. Entities are created in the simulator. However, for each class, it has some methods that are shared and some that are client-specific. For instance, the Unit class has addHp method which is shared. It also has methods like getSprite (gets the image of the entity), isVisible (checks if unit can be seen by the client), onDeathInClient (does a bunch of stuff when it dies only on the client like adding announcements) and isMyUnit (quick function to check if the client owns the unit). Up till now, I have been piling all the client functions into the shared Unit class, and adding a this.game.isServer() check when necessary. For instance, when the unit dies, it will call if (!this.game.isServer()) { this.onDeathInClient(); }. This approach has worked pretty fine so far, in terms of functionality. But as the codebase grew bigger, this style of coding seems a little strange. Firstly, the client code is clearly not shared, and yet is placed under the /shared folder. Secondly, client-specific variables for each entity are also instantiated on the server entity (like unit.sprite) and can run into problems when the server cannot instantiate the variable (it doesn't have Image class like on browsers). So my question is, is there a better way to organize the client code, or is this a common way of doing things for lockstep multiplayer games? I can think of a possible workaround, but it does have its own problems. Possible workaround (with problems) I could use Javascript mixins that are only added when in a browser. Thus, in the /shared/unit.js file in the /shared folder, I would have this code at the end: if (typeof exports !== 'undefined') module.exports = Unit; else mixin(Unit, LocalUnit); Then I would have /client/localunit.js store an object LocalUnit of client-side methods for Unit. Now, I already have a publish-subscribe system in place for events in the simulator. To remove the this.game.isServer() checks, I could publish entity-specific events whenever I want the client to do something. For instance, I would do this.publish('Death') in /shared/unit.js and do this.subscribe('Death', this.onDeathInClient) in /client/localunit.js. But this would make the simulator's event listeners list on the server and the client different. Now if I want to clear all subscribed events only from the shared simulator, I can't. Of course, it is possible to create two event subscription systems - one client-specific and one shared - but now the publish() method would have to do if (!this.game.isServer()) { this.publishOnClient(event); }. All in all, the workaround off the top of my head seems pretty complicated for something as simple as separating the client and shared code. Thus, I wonder if there is an established and simpler method for better code organization, hopefully specific to Node.js games.

    Read the article

  • Pong Collision Help in C# w/ XNA

    - by Ramses Brown
    Edit: My goal is to have it function like this: Ball hits 1st Quarter = rebounds higher (aka Y++) Ball hits 2nd Quarter = rebounds higher (using random value) Ball hits 3rd Quarter = rebounds lower (using random value) Ball hits 4th Quarter = rebounds lower (aka Y--) I'm currently using Rectangle Collision for my collision detection, and it's worked. Now I wish to expand it. Instead of it simply detecting whether or not the paddle/ball intersect, I want to make it so that it can determine what section of the paddle gets hit. I wanted it in 4 parts, with each having a different reaction to impact. My first thought is to base it on the Ball's Y position compared to the Paddle's Y position. But since I want it in 4 parts, I don't know how to do that. So it's essentially be if (ball.Y > Paddle.Y) { PaddleSection1 == true; } Except modified so that instead of being top half/bottom half, it's 1st Quarter, etc.

    Read the article

  • What are the maths behind 'Raiden 2' purple laser?

    - by Aybe
    The path of the laser is affected by user input and enemies present on the screen. Here is a video, at 5:00 minutes the laser in question is shown : Raiden II (PS) - 1 Loop Clear - Part 2 UPDATE Here is a test using Inkscape, ship is at bottom, the first 4 enemies are targeted by the plasma. There seems to be a sort of pattern. I moved the ship first, then the handle from it to form a 45° angle, then while trying to fit the curve I found a pattern of parallel handles and continued so until I reached the last enemy. Update, 5/26/2012 : I started an XNA project using beziers, there is still some work needed, will update the question next week. Stay tuned ! Update : 5/30/2012 : It really seems that they are using Bézier curves, I think I will be able to replicate/imitate a plasma of such grade. There are two new topics I discovered since last time : Arc length, Runge's phenomenon, first one should help in having a linear movement possible over a Bézier curve, second should help in optimizing the number of vertices. Next time I will put a video so you can see the progress 8-)

    Read the article

  • How do I generate terrain like that of Scorched Earth?

    - by alex
    Hi, I'm a web developer and I am keen to start writing my own games. For familiarity, I've chosen JavaScript and canvas element for now. I want to generate some terrain like that in Scorched Earth. My first attempt made me realise I couldn't just randomise the y value; there had to be some sanity in the peaks and troughs. I have Googled around a bit, but either I can't find something simple enough for me or I am using the wrong keywords. Can you please show me what sort of algorithm I would use to generate something in the example, keeping in mind that I am completely new to games programming (since making Breakout in 2003 with Visual Basic anyway)?

    Read the article

  • Physics timestep questions

    - by SSL
    I've got a projectile working perfectly using the code below: //initialised in loading screen 60 is the FPS - projectilEposition and velocity are Vector3 types gravity = new Vector3(0, -(float)9.81 / 60, 0); //called every frame projectilePosition += projectileVelocity; This seems to work fine but I've noticed in various projectile examples I've seen that the elapsedtime per update is taken into account. What's the difference between the two and how can I convert the above to take into account the elapsedtime? (I'm using XNA - do I use ElapsedTime.TotalSeconds or TotalMilliseconds)? Edit: Forgot to add my attempt at using elapsedtime, which seemed to break the physics: projectileVelocity.Y += -(float)((9.81 * gameTime.ElapsedGameTime.TotalSeconds * gameTime.ElapsedGameTime.TotalSeconds) * 0.5f); Thanks for the help

    Read the article

  • Generating geometry when using VBO

    - by onedayitwillmake
    Currently I am working on a project in which I generate geometry based on the players movement. A glorified very long trail, composed of quads. I am doing this by storing a STD::Vector, and removing the oldest verticies once enough exist, and then calling glDrawArrays. I am interested in switching to a shader based model, usually examples I see the VBO is generated at start and then that's basically it. What is the best route to go about creating geometry in real time, using shader / VBO approach

    Read the article

  • Calculating the "power" of a player in a "Defend Your Castle" type game

    - by Jesse Emond
    I'm a making a "Defend Your Castle" type game, where each player has a castle and must send units to destroy the opponent's castle. It looks like this (and yeah, this is the actual game, not a quick paint drawing..): Now, I'm trying to implement the AI of the opponent, and I'd like to create 4 different AI levels: Easy, Normal, Hard and Hardcore. I've never made any "serious" AI before and I'd like to create a quite complete one this time. My idea is to calculate a player's "power" score, based on the current health of its castle and the individual "power" score of its units. Then, the AI would just try to keep a score close to the player's one(Easy would stay below it, Normal would stay near it and Hard would try to get above it). But I just don't know how to calculate a player's power score. There are just too many variables to take into account and I don't know how to properly use them to create one significant number(the power level). Could anyone help me out on this one? Here are the variables that should influence a player's power score: Current castle health, the unit's total health, damage, speed and attack range. Also, the player can have increased Income(the money bag), damage(the + Damage) and speed(the + speed)... How could I include them in the score? I'm really stuck here... Or is there an other way that I could implement AI for this type of game? Thanks for your precious time.

    Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >