Search Results

Search found 14377 results on 576 pages for 'video card'.

Page 410/576 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

  • No virtual console on ubuntu 12.10

    - by Buzzzz
    When I try to do a ctr-alt f(1-6) in ubuntu 12.10 I only get a black screen with a blinking cursor but no login prompt. Any ideas on what could be wrong? It is a fresh install of 12.10 using a amd radeon 5850 graphics card. i have tried different things in my /etc/default/grub but at the moment I use the following: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vga=normal" #GRUB_CMDLINE_LINUX="vga=0x0376" #RUB_CMDLINE_LINUX_DEFAULT="vga=0x014c" #GRUB_CMDLINE_LINUX="vga=0x014c" #GRUB_GFXPAYLOAD_LINUX=1600x1200x24 # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console

    Read the article

  • FreeBSD after motherboard replacement; should I have any concerns?

    - by cc
    So after three years my motherboard (Asus M2N-0MX) has died off. As I go shopping for i's replacement tomorrow I have a concern about the data that I currently have on the drives wtihin. I'm currently running BSD 6.2, and am wondering if there would be any concern with installing a new OS on that system, would it be better to jsut install the latest BSD version, and are their any pitfalls that I should watch for to make sure I don't end up losing 750gb's of data. The setup consists of the following(to the best of my knowledge): Pioneer DVD drive 3ware RAID card four 250gb SATA drives in RAID 5 config thanks to anyone that can offer some advice, or just to confirm if I am over thinking things.

    Read the article

  • How to solve my black screen at boot?

    - by Juanillo
    I've got a friend with a weird problem. When he starts his computer the screen is completely black until the computer is completely started. So the screen is black until it suddenly shows the Windows desktop. He said that this is happening since a technical service repaired his computer, but that repair is not now in warranty. Recently the computer stopped working, but as the screen is black he cannot access to BIOS or start in safe mode (by pressing F8). When he inserts the Windows Vista DVD the system doesn't boot from DVD (it mustn't be configured in this way in the BIOS). Maybe there´s a problem with the hardware (maybe the graphic card)? Can anyone explain a reason why the screen is black during start-up? Any idea of what to do with the computer to restore it?

    Read the article

  • Dell Latitude E6400 power button and wireless not working or only working intermittently

    - by Droid
    The power button on the laptop stopped working randomly as of a day or two ago. I can only power the laptop on if its attached to a docking station, on which I can use the power button to turn on/off the laptop. Today the wireless card stopped working (the wifi light does not turn on, even after I turn on the wireless switch). What is the problem and how can I fix it? The laptop is about 1 year old. I have not dropped it, but do carry it around a good amount, including docking it/undocking it frequently.

    Read the article

  • Custom YouTube Player

    - by Tony
    Hi, Is it possible to hide the video content of the YouTube player (only statusbar (where is play button etc.) is visible) ? Or maybe do you know other (flash) players that have the ability to stream the YouTube movies ?

    Read the article

  • DB auto failover in c# does not work when the principal server physically goes offline

    - by user62521
    I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

    Read the article

  • Motherboard memory question

    - by JERiv
    I am currently drawing up specs on a new workstation for my office. I am considering the Asus P6X58D for a motherboard. This board's specs list it as supporting 24 gigs of memory. Suppose I were to use six four gig memory cards and then two video cards with 1 gig of memory apiece. Is the maximum supported memory similar to how 32 bit operating systems only have enough address space for 4 gigs of memory? Simply: Will the board post? If so, will the system be able to address all the memory, both the 24 gigs on the ddr3 bus and the 3 gigs on the graphics card?

    Read the article

  • Development environment for embedded system

    - by Howard Lee Harkness
    I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

    Read the article

  • Screen is black at login screen if display driver is enabled

    - by Amir Rachum
    I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

    Read the article

  • Scraping data from Flash (Games)

    - by awegawef
    I saw this video, and I am really curious how it was performed. Does anyone have any ideas? My intuition is that he scraped pixels from the screen (one per 'box'), and then fed that into some program to determine the next move. Is scraping pixel-by-pixel the way to do this, or is there a better way? I am looking to do something similar with either Java or Python. Thanks

    Read the article

  • does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

    - by locuse
    i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

    Read the article

  • Unable to diagnose Windows 7 lockup

    - by Delyan
    Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

    Read the article

  • Different graphic cards drivers while booting from external media

    - by goran
    I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

    Read the article

  • Power supply issue? New Radeon5850's fan runs at full speed and PC doesn't boot.

    - by Kris
    I recently bought a new ASUS EAH5850 graphics board. I installed it a custom PC which had an ASUS p5n-e SLI mobo along with a 500w Thermaltake W0093RU power supply. Sometimes when doing a cold boot the 5850's fan will run at full speed and the PC will not boot. Powering off by holding down the power button and powering back on sometimes remedies the situation and everything boots normally. Warm reboots also never seem to have problems. For some reason though cold boots almost always do. Another issue I notice is that when the PC does boot normally it takes longer (+30 secs) to POST than with my last video card. I flashed the mobo with the latest available BIOS but it had no effect. Is my problem a power issue or incompatible motherboard or something else I'm missing?

    Read the article

  • What are the cheap CDN for Origin Pull?

    - by DucDigital
    I've read several thread around ServerFault about this, but still I am not satisfy with the answer so I post a question here. I need a Origin Pull CDN that support big file (more than 200MB). I don't need a storage place since they are too small, just to relay the server. Also the price should be afforable, ofcourse not more than 150$ a month for their smallest plan. I also need to pay by credit card since I do not work or stays in the US so it's hard for me to do a bank wire. Thank you very much

    Read the article

  • Remote desktop connection drops before login can appear

    - by Keatly
    Hi Everyone, Someone asked this question a few months ago and I have the exact same problem. I have tried all of the suggested solutions in the other posting (in particular reinstalling the video card on the server), but have not had any luck. I have gone through this troubleshooting guide in detail with no results: http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html I have a client with Remote Desktop enabled that I can't connect to in our local network. When I enter in the machine ip/port in the connect box and hit Connect, it briefly gives the normal "Connecting..." dialog box. However, after 2 seconds it just drops. No error message, nothing. Just disappears as if nothing was happening. •Windows XP SP3 •Windows firewall is open for 3389TCP •Machine is on a domain •RDP is enabled in My Computer •User is a local admin I have loads of other machines on the same domain with the same GPO that work fine. Any ideas?

    Read the article

  • Flash Loaded Issue

    - by dragon
    I had dynamically create one Flash Player cs2, i had upload into my site, no of url link i had provided on my aspx page, when any one of the url is clicked,that url based flv viedeo will play..! In my case when i clicked url to play the video,player is loaded but is not visible, in the same window, but i had opened in new window in internetexploer it will playing..working fine? What the problem in open the player in same window... any one pls help me..? Thanks

    Read the article

  • embed youtube custom playlist name

    - by John Stockton
    I found a nice article: http://911-need-code-help.blogspot.com/2012/07/youtube-iframe-embeds-video-playlist-and-html5.html I am using the last option (Custom Playlist). But how to edit the embed code: <iframe width="560" height="315" src="http://www.youtube.com/embed/T0Jqdjbed40?playlist=SyoA4LXQco4,6l6PPvUhR4c" frameborder="0" allowfullscreen></iframe> in order to show my playlist name above thumbinails? i tried to add listname="name", name="name", list="name" but it don't work

    Read the article

  • Windows 7 Recurring Blue Screens: MEMORY_MANAGEMENT 0x1A

    - by Chris C.
    I have recurring BSODs that really have me scratching my head. Here's a look at the errors: MEMORY_MANAGEMENT 0x1A (ntoskrnl.exe) - I've seen this 9 times since April 2012 NTFS_FILE_SYSTEM 0x24 (Ntfs.sys) - this one's new, happend 4 days ago BAD_POOL_HEADER 0x19 (win32k.sys) - also new, happened 7 days ago My system specs: Intel Core i5 2500K @ 3.30GHz ASUS Sabertooth P67 Motherboard (Rev 2) * RMA'd my Rev 1 due to recall 16GB (4 x 4GB) Kingston HyperX 1600 MHz DDR3 RAM 2 x 640GB Western Digital Caviar Black 64MB SATA HDD EVGA NVIDIA GeForce GTS450 1GB PCI-E 2.0 Graphics Card I've got Windows 7 Home Premium and it's completely patched. I'm also running Microsoft Security Essentials, which is up-to-date and always present. I've run MemTest86+ from a USB drive for up to nine hours, giving my RAM a total of 6 passes, and it didn't detect a single error. I've used chkdsk in Windows 7 to scan the C:/ drive on boot (twice) and it found no problems. How can I find out what's causing all these blue screens?

    Read the article

  • How to reduce cpu and ram usage?

    - by Hellboy
    i am going to "read" (video/big) files from server (shared environment) to clients (webbrowsers) via php and would like to know first if there is a way to reduce cpu and ram usage somehow (as i have those limited). thanks.

    Read the article

  • What disk setup is needed / best practice for hypervisor-only servers?

    - by Luke404
    Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

    Read the article

  • Sharing VPN from XP to Linux virtual

    - by user55513
    Hi I will keep the question simple with few details, if more is needed tell me. Thanks. I am playing around with networking and virtualbox. So I have 2 virtual machines. One is windows xp and another has linux in it. Windows XP has 2 network cards. One for the internet and the other to connect to the linux computer. Linux has one 1 card and it can only access the internet passing through Windows XP. Internet works fine until I activate OpenVPN on Windows. When I turn on VPN, Linux has no access to it. How can I make linux use VPN too? I believe it has something to do with using the "route" command on XP to send VPN traffic to Linux but I was not able to figure it out how yet.

    Read the article

  • Using Windows 7 XP Mode for games

    - by Josefvz
    Hi all. I have Win 7 (x64) at home and I want to play some old games (specifically Lands of Lore 3, but also some others). This game does not work properly on Win 7, and there are no patches that I'm aware of to fix its issues. Can I use XP Mode to play this game (and other non Win 7 nice games), or is there a better way? I only have one PC and dual booting scares me... (so no to dual booting!) Another question: Will I have full hardware support (full use of my graphics card, etc) when I use DOSbox or a VM? I have decided to go with VirtualBox or vmware, I'll check which one gives the best performance, thanks for your input!

    Read the article

  • Options for transparent data encryption on SQL 2005 and 2008 DBs.

    - by Dan
    Recently, in Massachusetts a law was passed (rather silently) that data containing personally identifiable information, must be encrypted. PII is defined by the state, as containing the residents first and last name, in combination with either, A. SSN B. drivers license or ID card # C. Debit or CC # Due to the nature of the software we make, all of our clients use SQL as the backend. Typically servers will be running SQl2005 Standard or above, sometimes SQL 2008. Almost all client machines use SQL2005 Express. We use replication between client and server. Unfortunately, to get TDE you need to have SQL Enterprise on each machine, which is absolutely not an option. I'm looking for recommendations of products that will encrypt a DB. Right now, I'm not interested in whole disk encryption at all.

    Read the article

  • Server 2008 R2 repair install

    - by Kyle
    Is it possible to do a repair install on a server 2008 R2 Enterprise machine like we used to be able to do on 2003? I need to reinstall on a remote server and don't have a driver cd in the drive just a copy of server. I am worried that when it comes back up I won't have any drivers for the NIC. I have a iDRAC but can't seem to send files over the DRAC to the machine. Sadly this server doesn't have an SD card in the DRAC with the files I need. I welcome any suggestions if the repair is not possible. Our IDC is in Chicago and they are buried under snow so I won't be able to get another admin on site until at least tomorrow.

    Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >