Search Results

Search found 12575 results on 503 pages for 'office live'.

Page 412/503 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

  • Sometimes keyboard & touchpad work... sometimes not

    - by Voyagerfan5761
    When I first ran Ubuntu from CD on this Dell Inspiron 2650, it worked for about ten to fifteen minutes, then it hung (I was probably trying to do too much at once from a Live CD). The next time, my mouse and keyboard didn't work. I rebooted three times and finally got them working. I then installed Ubuntu alongside Windows XP. After installing, selecting the OS in GRUB worked, but my touchpad and keyboard were again not working. I rebooted, and they worked. (I fortunately had a USB mouse with which to reboot.) Booting Ubuntu and then rebooting to enable my keyboard and touchpad has become a routine ever since. Often several reboots are required; at one point I had to reboot over a dozen times in a row before getting a session where everything worked properly. (My installation has been in place for about three days a week now.) I've looked around for a device manager equivalent to no avail. Sometimes the hardware is properly detected, and sometimes it's not. Once or twice I've had the keyboard detected properly but the touchpad not. Plugging in my wireless card also sometimes requires a plug, unplug, and plug again to get it working. So is there some solution? I'm without an Internet connection at home, and this "laptop" is really a wall wart on my desk, so suggestions for packages may take a while to test. Xorg logs I captured two three four sample Xorg logs: one from a startup where the devices worked; one from when they didn't; one from a session where Ubuntu thought my touchpad was a normal mouse; and one from a session where my keyboard worked but the touchpad didn't. See this gist. Updated 2010-12-15 01:50 UTC with Xorg.0.log.keyboardonly file illustrating the case where the keyboard worked but not the touchpad. Updated 2011-01-11 04:10 UTC with Xorg.0.log.touchpadregmouse to illustrate a case where the touchpad was detected as a regular mouse (no "Touchpad" tab in mouse prefs).

    Read the article

  • Good Customer Service Example

    - by MightyZot
    Here’s another good customer service example for you! My wife purchased a Galaxy last week and she loves the phone.  She asked me to add it to our AT&T Microcell last night. I purchased the AT&T Microcell a couple of years ago, because cell signal out where I live sucks! Since microcells are managed on the AT&T web site, I went to the site and tried to sign in. Naturally, having not managed that microcell in a couple of years…and much to my chagrin…I discovered that I didn’t know my password OR my user ID. So, I decided to call and see if I could get my account reset that late in the day (we’re talking last night, so it was well after 7pm.) I called the technical support line, touched the appropriate numbers to navigate to microcell support, turned on my speaker phone, and prepared for the long wait. After about 45 seconds I was delighted to hear “Jeffrey” break in and ask what he could help me with. I explained that I have not managed my microcell for some time and had forgotten the user name and password.  “No problem”, he replied, and he asked me for the line I used to register the microcell. After confirming the last four digits of my IMEI number, he asked me for my wife’s number. I gave him my wife’s number and he said, “I’ve taken care of it Mr Pope. Just have her reboot her phone and you should see your microcell.” We rebooted her phone, it connected to the microcell, and voila, she was online! “Is there anything else I can help you with while I’ve got you on the line”, he said. “Nope”, I replied. “Ok, have a great night.” What made this a great customer service experience for me was that “Jeffrey” didn’t stop at giving me my user account and password, which I would probably forget anyway after setting up my wife’s new phone. Instead, he solved the real problem for me – adding my wife’s new phone to my microcell. Great job Jeffrey!

    Read the article

  • ArchBeat Link-o-Rama for July 2, 2013

    - by Bob Rhubart
    One Week To Go: OTN Architect Day: Cloud Computing - July 9, 2013, Redwood Shores, CA. The first OTN Architect Day event of 2013 happens in just one week, on Tuesday July 9 at the Oracle Conference Center in Redwood Shores, CA. Registration is free and you get three sessions by three experts on cloud computing in the real world — plus a panel Q&A for answers to all of your questions. Register now! Oracle Database 12c: Flashback Moving Forward | Lucas Jellema Oracle ACE Director Lucas Jellema's latest of several recent blog posts dealing with various aspects of the recently released Oracle Database 12c. Detroit, Embracing New Auto Technologies, Seeks App Builders This story from the New York Times paints a rosy picture indeed for app developers as the internet of things continues to evolve. Advanced View Criteria Implementation in ADF BC | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis' post focuses on advanced declarative View Criteria features. JDeveloper: Showing a Popup when Selecting an af:selectOneRadio | Timo Hahn Oracle ACE Timo Hahn illustrates a use case in which a popup is displayed each time the user clicks on one of the radio buttons of a button group. Can Technology Innovation Save The New York Times? One of the standout keynotes from the recent QCon New York event, this presentation by New York Times Sr. VP/CIO Marc Frons and CTO/VP Rajiv Pant paints a detailed portrait of the complete transformation of an organization -- not just the IT. Enterprise architects will find this particularly interesting. Video: Meet Growing IT Demand for Databases with Private DBaaS Do you understand the difference between traditional database deployment and database as a service? If not, you'll want to check out this video, which includes an overview of Oracle Enterprise Manager's capabilities for rapid deployment of DBaaS. S Webcast: Zero-Downtime Migration to Oracle Exadata Using Oracle GoldenGate: A Customer Case Study Presenters Alok Pareek (VP, Product Management/Development, Oracle Data Integration) and John F. Martin (CEO of Emerging Markets and CTO IQNavigator) discuss how IQNavigator is using Oracle GoldenGate with Oracle Exadata. Free eBook: Building a Database Cloud for Dummies This free quick-reference guide, organized into six short chapters and supplemented with helpful illustrations, provides a clear overview of the cloud and step-by-step instructions on deploying database as a service. (Registration required.) Thought for the Day "My motto is: Live every day to the fullest – in moderation." — Lindsay Lohan (Born July 2, 1986) Source: brainyquote.com

    Read the article

  • SQL Saturday 43 (Redmond, WA) Review

    - by BuckWoody
    Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Business School graduate joins Oracle

    - by jessica.ebbelaar(at)oracle.com
    My name is Mathias, I work as an Applications Inside Sales Rep for the French market, and I’d like to give you a brief snapshot of my experience at Oracle. First things first, how did you hear about Oracle? Where have you seen the sharp and recognizable red logo? Was it in Charles de Gaulle Airport when your eyes crossed the 20-metre banner with a picture of a strange big machine in the middle? Was it through reading the Forbes 10 top IT companies worldwide ranking? Or is it because IT is your thing and you cannot but know one of the “big four”? Meeting with a Grenoble Alumnus My story is a little different. My plan was to work in sales, in the IT industry. I had heard about Oracle, but my opinion at the time was that this kind of multinational company was way out of reach for a young graduate, even with high enthusiasm and great excitement to be (finally) on the job market. So, I was really surprised when I had an interesting conversation with a top alumnus of my business school. We were at the Grenoble Ecole de Management graduation ceremony (our graduation!), and before the party got really started, I got to chat with her. She told me of the great experience she was getting by living and working in Dublin. She had already figured it all out: “you work with another 100 young people from 10 different nationalities across Europe, you can be based in Dublin, but then once you work really hard you can move to Malaga Spain or other BUs around the world, you can work with different lines of business and learn about new “techy” and business oriented products, move to the field in your home country or elsewhere, etc.” What, what, what? Moving around Europe, trained by the best sales coaches in the world, acquiring strong IT knowledge and getting on board with one of fastest-growing and most watched companies in the world? Well, I was in. The next day (OK, 3 days after, the time to recover), I sent her my CV, and 3 months later I started as a Business Development Consultant at Oracle in Dublin, representing the latest cloud based CRM across the French market. That was 15 months ago. Since then, I moved line of business twice, I’m always learning new things and working with different and senior stakeholders; I have attended hundreds of hours of sales and product training (priceless when you come from a business background); I passed the Dublin Institute of Technology Sales Certification through different trainings given onsite within Oracle; I’ve led projects based around social media and I’ve gotten involved within various sales deals going on my market. Despite all of these great things, two will remain in my spirit: the multiculturalism that I experience every day in the office, and the American style of management - more direct and open than what you can find in “regular French companies”. Sales Progression Board In May 2012, I passed what we call a ‘Sales Progression Board’ to be promoted to an Inside Sales position. I am now in charge of generating revenue through the sale of Oracle applications on my specific territory. Always keeping in my mind my personal ambition: going to the field one day. Interested to join Oracle in the same role as Mathias? Visit http://campus.oracle.com.

    Read the article

  • Make the Taskbar Buttons Switch to the Last Active Window in Windows 7

    - by The Geek
    The new Windows 7 taskbar’s Aero Peek feature, with the live thumbnails of every window, is awesome… but sometimes you just want to be able to click the taskbar button and have the last open window show up instead. Here’s a quick hack to make it work better. To better understand the problem, imagine having nine windows of the same type open on your screen, but you are primarily working in just one of the windows at a time. So every time you want to switch back, you have to click the taskbar button, and then choose the one you are using from the list, which can be pretty annoying… Now if you know your Windows 7 shortcuts, you’d know that you can simply hold down the Ctrl key while clicking on the taskbar button, and the last window will show up. In fact, you can keep holding down the Ctrl key and keep clicking, and Windows will cycle through the open windows. It’s a useful shortcut, but hardly something you want to do every single time. Instead, we’ll use a quick registry hack to make the normal click switch to the last open window—if you still want to see the thumbnail list, just hover your mouse over the button for half a second to see the full list. Manual Registry Hack for Last Active Window Open up regedit.exe through the start menu search or run box, and then head down to the following registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced Once you’re there, create a new 32-bit DWORD value on the right hand side, give it the name LastActiveClick, and set the value to 1. Once you are done, it should look something like this: Once you are done, you’ll have to log off and back on, or you can kill Explorer.exe through Task Manager and re-open it. Download the Registry Hack Instead Since you probably don’t feel like registry hacking, we’ve provided you an easy downloadable version. You can simply download the file, extract it, and then double-click on the LastActiveClick.reg file. Once you are done, you’ll have to log off and back on, just like with the manual registry hack. Download LastActiveClick Registry Hack from howtogeek.com Similar Articles Productive Geek Tips Make the Windows 7 Taskbar Work More Like Windows XP or VistaStupid Geek Tricks: Select Multiple Windows on the TaskbarReorganize Your Taskbar Buttons and Tray Icons in XP/VistaKeyboard Ninja: Create a Hotkey to Switch to Your Open Outlook WindowTaskbar Eliminator Does What the Name Implies: Hides Your Windows Taskbar TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

    Read the article

  • Career Change Need Advice: Professional Web Developer

    - by bikedorkseattle
    I'm hoping to get some advice here on the steps I should take to make a career change into professional web development. I've been working in cancer research the last 14 years and I need a change. The job market is terrible, the pay is worse, and despite what one would think the atmosphere is generally un-collegial, even in your own group. Venture funding never returned after the dot com burst and with 3 to 5 wars our country is now in, NIH funding is only going to get worse. I know things are not going to get better for my field, sadly, and I know I need to move on. For probably just as long I have fiddled around with web development, I even run a fairly popular site with close to 1 million/month pageviews that pulls a decent income, but not stable enough to live off of right now. My skills are ok for being self taught. I enjoy the fast paced nature of the web and the tools the community creates and how eager people are to help and share knowledge; it's what science should be. I have been trying to find an entry level developer job doing standard HTML/CSS/PHP/MySQL/JS/jQuery type work. A good 50%+ of the jobs want someone with a CS degree, and most want 5 years experience. Having no professional experience and no formal education, I know I'm at a huge disadvantage. I am now considering my options on how to move forward professionally. The way I see it I have basically 3 options. Build up my portfolio of work as much as I can and continue to learn as much as I can on my own. Try to contribute on some open source project when time allows. Network like crazy and go to meetups. Be confident and pray a lot in private. OR While doing above, do some certification programs in PHP and Java, possibly others. Get a Zend Certification. OR Spend a few years getting a CS degree while doing 1. I've already done the work fulltime go to school thing and it doesn't excite me one bit. I didn't have the greatest college experience and am not too eager to return, but I have a family to feed. Is the degree really necessary or is it more of a right of passage type thing in most instances? I appreciate everyones input. Thanks for taking the time to respond.

    Read the article

  • How to switch off wifi on startup or from the console

    - by mit
    I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

    Read the article

  • Planning in the Cloud - For Real

    - by jmorourke
    One of the hottest topics at Oracle OpenWorld 2012 this week is “the cloud”.  Over the past few years, Oracle has made major investments in cloud-based applications, including some acquisitions, and now has over 100 applications available through Oracle Cloud services.  At OpenWorld this week, Oracle announced seven new offerings delivered via the Oracle Cloud services platform, one of which is the Oracle Planning and Budgeting Cloud Service.  Based on Oracle Hyperion Planning, this service is the first of Oracle’s EPM applications to be to be offered in the Cloud.    This solution is targeted to organizations that are struggling with spreadsheets or legacy planning and budgeting applications, want to deploy a world class solution for financial planning and budgeting, but are constrained by IT resources and capital budgets. With the Oracle Planning and Budgeting Cloud Service, organizations can fast track their way to world-class financial planning, budgeting and forecasting – at cloud speed, with no IT infrastructure investments and with minimal IT resources. Oracle Hyperion Planning is a market-leading budgeting, planning and forecasting application that is used by over 3,300 organizations worldwide.  Prior to this announcement, Oracle Hyperion Planning was only offered on a license and maintenance basis.  It could be deployed on-premise, or hosted through Oracle On-Demand or third party hosting partners.  With this announcement, Oracle’s market-leading Hyperion Planning application will be available as a Cloud Service and through subscription-based pricing. This lowers the cost of entry and deployment for new customers and provides a scalable environment to support future growth. With this announcement, Oracle is the first major vendor to offer one of its core EPM applications as a cloud-based service.  Other major vendors have recently announced cloud-based EPM solutions, but these are only BI dashboards delivered via a cloud platform.   With this announcement Oracle is providing a market-leading, world-class financial budgeting, planning and forecasting as a cloud service, with the following advantages: ·                     Subscription-based pricing ·                     Available standalone or as an extension to Oracle Fusion Financials Cloud Service ·                     Implementation services available from Oracle and the Oracle Partner Network ·                     High scalability and performance ·                     Integrated financial reporting and MS Office interface ·                     Seamless integration with Oracle and non-Oracle transactional applications ·                     Provides customers with more options for their planning and budgeting deployment vs. strictly on-premise or cloud-only solution providers. The OpenWorld announcement of Oracle Planning and Budgeting Cloud Service is a preview announcement, with controlled availability expected in calendar year 2012.  For more information, check out the links below: Press Release Web site If you have any questions or need additional information, please feel free to contact me at [email protected].

    Read the article

  • How to handle interruptions in developer work without losing concentration? [closed]

    - by tomaszs
    I work as a developer for some years now. Mainly the issue why it's antisocial work is because you need to spend much time programming. I've been always the kind of developer who likes to cut off from any sources of distraction and spend several hours on project because in this way i (as i hope) do it faster. There are also other kinds of developers, more social that can chat, read, watch movies while development and they are ok with this and don't hesitate to be interrupted in their work in any time and come back to the project without any problem. For me any distraction is source of frustration because i need to spend substantial time to load my mind with all info about the project and to concentrate back on the tasks. I always thought it's better to do this that way because project is completed faster. But it makes some things difficult: it's hard to chat with someone who needs to have some important info: because you are a bit frustrated when you know you loose your Zen. And sometimes its more important to chat with someone than to loose Zen. Well.. mostly in any other kind of work the ability to be "multitask" is very important. But as a developer and as a person it's also very important to stay social. And i see now that the problem of concentration makes it difficult to make the right chose: the cost of maintaining concentration is just sometimes so damn high! So is it only me that i have so little concentration skills so any interruption is for me a big deal? Maybe it's just i have so bad memory so that i dont remember all issues of a project so long? Or maybe i develop the project in a fashion that requires me to store so much info on my mind only to be able to start working with code? Or should i just accept that being more social will make me finish project slower and in the fashion that i personally consider non 100% productive? And it's just normal thing and i should just accept it and start to live like any other person who has many works and don't assume that programming is in any case other than any other work and i just do fuzz about the whole concentration thing? This is question for mid-pro developers. I think you was having the same dillema in your life. I would be glad if you could help me take the right road here because it's just driving me and i suppose people i work with crazy for years.

    Read the article

  • The Latest Major Release of AutoVue is Now Available!

    - by Pam Petropoulos
    Click here to read the full press release. To learn more about AutoVue 20.2, check out the What's New in AutoVue 20.2 Datasheet AutoVue 20.2 continues to set the standard for enterprise level visualization with Augmented Business Visualization, a new paradigm which reconciles information and business data from multiple sources into a single view, providing rich and actionable visual decision-making environments. The release also includes; capabilities that enhance end-to-end approval workflow; solutions to visually enable the mobile workforce; and support for the latest manufacturing and high tech formats.     New capabilities in release 20.2 include: ·         Enhancements to the Augmented Business Visualization framework o    Creation of 2D hotspots has been extended in 2D drawings, PDF and image files and can now be defined as regional boxes, rather than just text strings o    New 3D Hotspot links in models and drawings. Parts or components of 3D models can be selected to create hotspot links. ·         Enhanced end-to-end approval workflows with digital stamping and batch stamping improvements ·         Solutions that visually enable the mobile workforce and extend enterprise visualization to mobile devices, including iPads through OVDI (Oracle Virtual Desktop Infrastructure) ·         Enhancements to AutoVue enterprise readiness: reliability and performance improvements, as well as security enhancements which adhere to Oracle’s Software Security Assurance standards ·         Timely support for new MCAD, ECAD, and Office formats ·         New 20.2 versions of AutoVue Document Print Services and Integration SDK (iSDK) ·         New Dutch language availability   The press release also contains terrific supporting quotes from AutoVue customers and partners.        “AutoVue’s stamping enhancements will greatly benefit our building permit management processes,” said Ties Kremer, Information Manager, Noordenveld Municipality, Netherlands. “The ability to batch stamp documents will speed up our approval processes, enable us to save time and money, and help us meet our regulatory compliance obligations.”          “AutoVue provides our non-technical teams in marketing and sales with access to customer order requirements and supporting CAD documents and drawings,” said James Lim, Regional Technical Systems Manager at Molex Incorporated. “AutoVue 20.2 has enabled us to refine our quotation process, and reduce order errors.”         “We are excited about our use of AutoVue’s Augmented Business Visualization framework, which will offer Meridian users enhanced access to related technical documentation,” said Edwin van Dijk, Director of Product Management, BlueCielo.  “By including AutoVue’s new regional hotspot capabilities within BlueCielo Meridian Enterprise, the context of engineering information is carried over into the visual representation of complex assets, thereby helping us to improve productivity and operational excellence.”    

    Read the article

  • As a tooling/automation developer, can I be making better use of OOP?

    - by Tom Pickles
    My time as a developer (~8 yrs) has been spent creating tooling/automation of one sort or another. The tools I develop usually interface with one or more API's. These API's could be win32, WMI, VMWare, a help-desk application, LDAP, you get the picture. The apps I develop could be just to pull back data and store/report. It could be to provision groups of VM's to create live like mock environments, update a trouble ticket etc. I've been developing in .Net and I'm currently reading into design patterns and trying to think about how I can improve my skills to make better use of and increase my understanding of OOP. For example, I've never used an interface of my own making in anger (which is probably not a good thing), because I honestly cannot identify where using one would benefit later on when modifying my code. My classes are usually very specific and I don't create similar classes with similar properties/methods which could use a common interface (like perhaps a car dealership or shop application might). I generally use an n-tier approach to my apps, having a presentation layer, a business logic/manager layer which interfaces with layer(s) that make calls to the API's I'm working with. My business entities are always just method-less container objects, which I populate with data and pass back and forth between my API interfacing layer using static methods to proxy/validate between the front and the back end. My code by nature of my work, has few common components, at least from what I can see. So I'm struggling to see how I can better make use of OOP design and perhaps reusable patterns. Am I right to be concerned that I could be being smarter about how I work, or is what I'm doing now right for my line of work? Or, am I missing something fundamental in OOP? EDIT: Here is some basic code to show how my mgr and api facing layers work. I use static classes as they do not persist any data, only facilitate moving it between layers. public static class MgrClass { public static bool PowerOnVM(string VMName) { // Perform logic to validate or apply biz logic // call APIClass to do the work return APIClass.PowerOnVM(VMName); } } public static class APIClass { public static bool PowerOnVM(string VMName) { // Calls to 3rd party API to power on a virtual machine // returns true or false if was successful for example } }

    Read the article

  • Ubuntu hangs on booting up after a update

    - by alFReD NSH
    I've made a clean install yesterday, for the first time restarted, everything went good and then after I updated packages and copied my old home directory to replace the new one, when I restarted it hung when it was booting. I tried reinstalling again and doing the same thing, but again same thing happened. Here's what I see, before when the Ubuntu logo with the five dots is shown: Then after that, 3 or 4 of the dots will load and hangs there. If I press arrow up before that, this will be shown I started my laptop again today(the pictures are for the day before) and after that, boot up with live CD and got the logs. dmesg: http://pastebin.com/aVxV7BQF syslog: http://pastebin.com/4E2BrRUK And some info: alfred@alFitop:~$ uname -a Linux alFitop 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: http://pastebin.com/AZbKJmsT sources.list : http://pastebin.com/2HazmuyV My problem is a bit similar to here: http://ubuntuforums.org/showthread.php?t=1918271 Though I didn't change my x.org config. Only changed home directory and updated packages. I've tried memtest and fschk, both passed. In the recovery mode boot option, I've also realized that same things happen in failsafe graphical mode. But when I go into the network mode, I can boot up my system, but of course same the graphics are just basic. Adding blacklist intel_ips to /etc/modprobe.d/blacklist.conf solves the first message, but still I get the broken pipe and CPU stack traces. The current kernel version is 3.2.0-25, I've tried booting up in the 3.2.0-23(the one the installer came with, but same results.) Also uninstalled apparmor, didn't help. I've installed Ubuntu again, this time without copying the home directory, also same result. --- UPDATE --- This problem was solved before with removing backports, but its back again! I've updated my laptop last night and the problem came back. It's definitely one of these packages. My /var/log/apt/term.log and /var/log/apt/history.log. I'm almost having the same situation. --- UPDATE --- I realized this also have happened on times that I have updated(haven't restarted after it) and my computer power has been cut off and its shutdown due to lack of power. And I realized if I just do as I answered but not in somewhere without GUI(networking mode has the GUI) it wouldn't work.

    Read the article

  • OpenWorld in Small Bites

    - by Kathryn Perry
    Fifty thousand attendees -- that's bigger than the cities some of us live in. Monday morning it took 20 minutes to get from Hall D in Moscone North to a conference room in Moscone South -- the crowds were crushing! A great start to a great week! Larry is as big a name as ever on the program schedule and on the Moscone stage. People were packed in Hall D and clustered around every big screen TV. He stayed on script as he laid out Oracle's SaaS, PaaS, and IaaS strategies. Every seat in Chris Leone's Fusion Apps Cloud Overview was filled on Monday morning. Oracle employees who wanted to get in were turned away. And the same thing happened in the repeat session on Wednesday. Our newest suite of apps is hot! Speaking of hot, the weather was made to order. Then it turned very San Francisco-like on Wednesday afternoon. Downright cold for those who trusted SF temps to hold in the 80's. Who did you follow on Twitter during the conference? So many voices, opinions, and convos! Great combo of social media and sharp minds. Be sure to follow @larryellison, @stevenrmiranda, and @Oracle for updates and MyPOVs. Keywords for the Apps customers at the conference were cloud, mobile, and social. Every day, every session, every speaker. Wednesday afternoon, 4 pm at the Four Seasons hotel. A large roomful of analysts and influencers firing questions at a panel of eight Fusion customers. Steve Miranda moderating. Good energy and a great exchange of information and confidence. Word on the street is that OpenWorld has outgrown San Francisco -- but moving it seems unthinkable. The city isn't just a backdrop for an industry conference - it's a headliner right up there with Larry Ellison and Pearl Jam. As you can imagine, electrical outlets were in high demand at every venue. The most popular hotels and bars near Moscone designed their interiors around accessible electrical power strips. People are plenty willing to buy a drink while they grab a charge. Wednesday afternoon, 4 pm at the Four Seasons hotel. A large roomful of analysts and influencers firing questions at a panel of eight Fusion customers. Steve Miranda moderating. Good energy and a great exchange of information and confidence. Treasure Island in the dark. Eddy Vedder has an amazing voice! And Kings of Leon over delivered on people's expectations. It was cold. It was windy. It was very fun. One analyst said it's the best customer appreciation party in the industry. 

    Read the article

  • Memories about Tadeusz Golonka

    - by Damian
    Today at 10:55 AM, Tadeusz Golonka - my greatest  Mentor and Teacher  passed away. I had te opportunity to met Tadek in person several times last years. It was always a great experience to see how he shared his energy and passion. I was always impressed and had a lot of new ideas after such meeting or lecture. I can remember the meeting  in early 2009 and his briliant speech he did for us, the MVP community in Poland. We spent two days together and he talked to us all the time. He gave us examples how to share IT passion to other people and how to be better person for others. He was the greates Mentor I have ever met - I realized this during that meeting. My greates dream was and still is to be "like Tadek". Many Times I just went to events to see / hear him on stage ("in action"). I always wanted to have his energy, empathy and passion. Now I have to live without his good words and advices....Let me put here the words that Adam Cogan wrote on Tadek's profile on Facebook. I just can't write about that fatal accident. "The circumstances of Tadeusz Golonka death are too tragic. Tad stood up to offer his seat to an elderly lady, he lost his balance and then he slipped and hit the tram door hard. He then fell out of the tram and hit the metal barriers that separate the tram rails from the street. It was a severe accident...... So horrible.  At first it was a miracle is that he survived... he fought for several days.  My thoughts are with his lovely family. The family have asked for blood donations as a symbolic gift. Tad received a lot of blood.  Thank you Tad, you were a wonderful person. I will remember you as a kind man, a gentleman. "RIP Tadeusz- You will never ever be forgotten. You are with us all the time  

    Read the article

  • Easy Made Easier - Networking

    - by dragonfly
        In my last post, I highlighted the feature of the Appliance Manager Configurator to auto-fill some fields based on previous field values, including host names based on System Name and sequential IP addresses from the first IP address entered. This can make configuration a little faster and a little less subject to data entry errors, particularly if you are doing the configuration on the Oracle Database Appliance itself.     The Oracle Database Appliance Appliance Manager Configurator is available for download here. But why would you download it, if it comes pre-installed on the Oracle Database Appliance? A common reason for customers interested in this new Engineered System is to get a good idea of how easy it is to configure. Beyond that, you can save the resulting configuration as a file, and use it on an Oracle Database Appliance. This allows you to verify the data entered in advance, and in the comfort of your office. In addition, the topic of this post is another strong reason to download and use the Appliance Manager Configurator prior to deploying your Oracle Database Appliance.     The most common source of hiccups in deploying an Oracle Database Appliance, based on my experiences with a variety of customers, involves the network configuration. It is during Step 11, when network validation occurs, that these come to light, which is almost half way through the 24 total steps, and can be frustrating, whether it was a typo, DNS mis-configuration or IP address already in use. This is why I recommend as a best practice taking advantage of the Appliance Manager Configurator prior to deploying an Oracle Database Appliance.     Why? Not only do you get the benefit of being able to double check your entries before you even start on the Oracle Database Appliance, you can also take advantage of the Network Validation step. This is the final step before you review all the data and can save it to a text file. It can be skipped, if you aren't ready or are not connected to the network that the Oracle Database Appliance will be on. My recommendation, though, is to run the Appliance Manager Configurator on your laptop, enter the data or re-load a previously saved file of the data, and then connect to the network that the Oracle Database Appliance will be on. Now run the Network Validation. It will check to make sure that the host names you entered are in DNS and do resolve to the IP addresses you specifiied. It will also ping the IP Addresses you specified, so that you can verify that no other machine is already using them (yes, that has happened at customer sites).     After you have completed the validation, as seen in the screen shot below, you can review the results and move on to saving your settings to a file for use on your Oracle Database Appliance, or if there are errors, you can use the Back button to return to the appropriate screen and correct the data. Once you are satisfied with the Network Validation, just check the Skip/Ignore Network Validation checkbox at the top of the screen, then click Next. Is the Network Validation in the Appliance Manager Configurator required? No, but it can save you time later. I should also note that the Network Validation screen is not part of the Appliance Manager Configurator that currently ships on the Oracle Database Appliance, so this is the easiest way to verify your network configuration.     I hope you are finding this series of posts useful. My next post will cover some aspects of the windowing environment that gets run by the 'startx' command on the Oracle Database Appliance, since this is needed to run the Appliance Manager Configurator via a direct connected monitor, keyboard and mouse, or via the ILOM. If it's been a while since you've used an OpenWindows environment, you'll want to check it out.

    Read the article

  • Why would you dual-run an app on Azure and AWS?

    - by Elton Stoneman
    Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/11/10/why-would-you-dual-run-an-app-on-azure-and-aws.aspxI had this question from a viewer of my Pluralsight course, Implementing the Reactive Manifesto with Azure and AWS, and thought I’d publish the response. So why would you dual-run your cloud app by hosting it on Azure and AWS? Sounds like a lot of extra development and management overhead. Well the most compelling reasons are reliability and portability. In 2012 I was working for a client who was making a big investment in the cloud, and at the end of the year we published their first external API for business partners. It was hosted in Azure and used some really nice features to route back into existing on-premise services. We were able to publish a clean, simple API to partners, and hide away the underlying complexity of the internal services while still leveraging them to do all the work. Two days after we went live, we were hit by the Azure SSL certificate expiry outage, and our API was unavailable for the best part of 3 days. Fortunately we had planned a gradual roll-out to partners, so the impact was minimal, but we’d been intending to ramp up quickly, and if the outage had happened a week or two later we would have been in a very bad place. Not least because our app could only run on Azure, we couldn’t package it up for another service without going back and reworking the code. More recently AWS had an issue with a networking device in one of their data centres which caused an outage that took the best part of a day to resolve. In both scenarios the SLAs are worthless, as you’ll get back a small percentage of your cloud expenditure, which is going to be negligible compared to your costs in dealing with the outage. And if your app is built specifically for AWS or Azure then if there’s an extended outage you can’t just deploy it onto a new set of kit from a different supplier. And the chances are pretty good there will be another extended outage, both for Microsoft and for Amazon. But the chances are small that it will happen to both at the same time. So my basic guidance has been: ignore the SLAs, go for better uptime by using two clouds. As soon as you need to scale beyond a single instance, start by scaling out to another cloud. Then scale out to different data centres in both clouds. Then you’ve got dual-cloud, quadruple-datacentre redundancy, so any more scaling you need can be left to the clouds to auto-scale themselves. By running in both clouds, you’ve made your app portable, so in the highly unlikely event that both AWS and Azure go down in multiple regions, you’ll have a deployment package which will let you spin up a new stack on yet another cloud, without having to rework your solution.

    Read the article

  • Microsoft BUILD 2013&ndash;Day 1 Summary

    - by Tim Murphy
    Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013ndashday-1-summary.aspx I’m happy to be at BUILD this week, mainly because my flights finally got me here late on Tuesday.  My biggest complaints so far are the flights and the hotel.  It seems that almost every flight into San Francisco were delayed multiple hours.  The Sequester so lovingly forced on America by congress means that the airport was short controllers.   That, along with poor weather and airport construction meant most people were 2-3 hours late arriving.  Add on top of that the fact that the hotel that I picked durring registration is absolutely horrid.  It looks like something out of a ghost hunters show and smells like it too.  I think if Microsoft is going to select a hotel they need to make sure that it is adequate. Rant over! So what happened the first day?  Steve Balmer started off the keynote along with Julie Larson-Green and a cast of others.  We finally found out that there were around six thousand people attending BUILD and that the focus this year would be Windows 8, Windows Phone 8 and Azure.  For the rest of the keynote I am going to have a separate post. You can’t have a Microsoft conference without some fun.  This year they have a hunt for pins that represent different gestures in Windows 8.  I got all of mine.  Now they just need to pull my name. The sessions I attended were really good. They covered live tiles, what’s new in XAML and building Windows Phone UIs presented by Kraig Brockschmidt, Tim Heuer and Shawn Oster respectively.  These will also be covered in separate posts. The exhibit area was interesting, but somewhat disappointing.  TechEd 2012 I think was better organized and better staffed by the vendors.  It also seemed that the Microsoft teams’ booths were also in need of some organization and staffing. Overall it was a really fun day capped off by all six thousand attendees standing in like to get their Acer 8” tables and Surface Pros.  What a day!  Stay tuned for follow up posts. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote

    Read the article

  • Retrofit Certification

    - by Bill Evjen
    Impact of Regulations on Cabin Systems Installation John Courtright, Structural Integrity Engineering There are “heightened” FAA attention to technical issues related to IFE and Wi-Fi Systems Installations The Aging Aircraft Safety Rule – EWIS & Damage Tolerance Analysis The Challenge: Maximize Flight Safety While Minimizing Costs Issue Papers & Testing, Testing, Testing The role of Airworthiness Directives (ADs) on the design of many IFE systems and all antenna systems. Goal is safety AND cost-effective maintenance intervals and inspection techniques The STC Process Briefly Stated Type Certifications (TC) Supplemental Type Certifications (STC) The STC Process Project Specific Certification Plan (PSCP) Managed by FAA Aircraft Certification Office (ACO) Type of Project (Electrical/Mechanical Systems or Structural) Specific Type of Aircraft Being Modified Schedule Design & Installation Location What does the STC Plan (PSCP) Cover? System Description – What does the system do? System qualification – Are the components qualified? Certification requirements – What FARs are applicable? Installation detail – what is being modified? Prototype installation – What is new? Functional hazard Assessment (FHA) – is it safe? EZAP-EWIS Requirements – Any aging aircraft issues? Certification Data – How is compliance achieved? Delegation and FAA involvement – Who is doing the work? Proposed certification schedule – When is the installation? Certification documentation – What the FAA Expects to see Cabin Systems Certification Concerns In addition to meeting the requirements for DO-160, Cabin System Certification needs to address issues related to: Power management: Generally, IFE and Wi-Fi Systems are classified as “Non-Essential Equipment” from a certification viewpoint. Connected to “non-essential” power buses Must be able to shed IFE & Wi-Fi Systems in a smoke/fire event or Other electrical emergency (FAA Policy 00-111-160) FAA is more relaxed with testing wi-fi. It used to be that you had to have 150 seats with laptops running wi-fi, but now it is down to around 50. Aging aircraft concerns – electrical and structural Issue papers addressing technical concerns involving: “Structural Certification Criteria for Large Antenna Installations” Antenna “Vibration/Buffeting Compliance Criteria” DO-160 : Environmental Test Procedures DO 160 – “Environmental Conditions and Test Procedures for Airborne Equipment”, Issued by RTCA Provides guidance to equipment manufacturers as to testing requirements Temperature: –40C to +55C Vibration and Shock Contaminant susceptibility – fluids and dust Electro-magnetic Interference Cabin systems are generally classified as “non-essential” Swissair 111 crashed (in part) due to non-standard wiring practices. EWIS Design Implications Installation design must take EWIS Requirements into account. This generally means: Aircraft surveys are needed to identify proper wire routing Ensure existing wiring diagrams are correct Identify primary/Secondary/Tertiary bus locations Verify proper separation of wire bundles exist Required separation from fuel quantity indicator system (FQIS) to prevent fuel tang ignition Enhanced Zonal Analysis Procedure (EZAP) Performed EZAP was developed by the Aging Transport Systems Rulemaking Advisory Committee (ATSRAC) EZAP is the method for analyzing airplane zones with an emphasis on evaluating wiring systems and the existence of combustibles  in the cabin. Certification Considerations for Wi-Fi Systems Electrical – All existing DO 160 testing required Issue papers required Onboard EMI testing – any interference with aircraft systems when multiple wi-fi users are logged on? Vibration/Buffeting compliance criteria – what is the effect of the antenna on aircraft flight characteristics? Structural certification criteria – what are the stress loads on the aircraft at the antenna location and what is the impact on maintenance inspection criteria for the airline? Damage tolerance analysis required Goal – minimize maintenance inspection intervals

    Read the article

  • The Rise of Project Intelligence and Why It Matters

    - by Melissa Centurio Lopes
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Amy DeWolf Are you doing any of these in your organization? How are you leveraging historical data to forecast projects? There’s a lot going on in government today. The economic pressures agencies feel from the uncertainty of budget cuts and sequestration effect every part of an organization, including the Project Management Office (PMO).  The PMO is responsible for monitoring and administering government IT projects. As time goes on, priorities shift, technology advances, and new regulations are imposed, all of which make planning and executing projects more difficult.  For example, think about your own projects.  How many boxes do you need to check and hoops do you need to jump through to ensure you comply with new regulations? While new regulations and technology advancements can be a good thing, they add an additional layer of complexity to already complex projects. To overcome some of these pressures, particularly new regulations, many in the PMO world are adopting a new approach- Project Intelligence (PI). According to a new Oracle Primavera white paper, The Rise of Project Intelligence: When Project Management is Just Not Enough, “PI uses Business Intelligence methods to leverage historical project data to make more informed decisions and greatly enhance project execution.” Currently, project managers plan and forecast the possible phases in an execution cycle.  However, most project managers don’t have the proper tools to do this as effectively as they would like. As the white paper noted, “The underlying deficiencies in most forecasting approaches are that 1) the PM fails in most instances to leverage historical data and 2) the PM doesn’t employ current Business Intelligence tools.” PI seeks to overturn this by combining modeling tools used in Business Intelligence for projects with the understanding of Emotional Intelligence for managing people.   Simply put, Project Intelligence is built off four main pillars: Actively use historical data to forecast project cycles Understand the intricacies of complex projects Enhance social and emotional intelligence in projects Actively use Business intelligence tools Read our complimentary whitepaper and discover the importance of emotional intelligence and best practices for improving projects, specifically in terms of communication.

    Read the article

  • When a problem is resolved

    - by Rob Farley
    This month’s T-SQL Tuesday is hosted by Jen McCown, and she’s picked the topic of Resolutions. It’s a new year, and she’s thinking about what people have resolved to do this year. Unfortunately, I’ve never really done resolutions like that. I see too many people resolve to quit smoking, or lose weight, or whatever, and fail miserably. I’m not saying I don’t set goals, but it’s not a thing for New Year. The obvious joke is “1920x1080” as a resolution, but I’m not going there. I think Resolving is a strange word. It makes it sound like I’m having to solve a problem a second time, when actually, it’s more along the lines of solving a problem well enough for it to count as finished. If something has been resolved, a solution has been provided. There is a resolution, through the provision of a solution. It’s a strangeness of English. When I look up the word resolution at dictionary.com, it has 12 options, including “settling of a problem”. There’s a finality about resolution. If you resolve to do something, you’re saying “Yes. This is a done thing. I’m resolving to do it, which means that it may as well be complete already.” I like to think I resolve problems, rather than just solving them. I want my solving to be final and complete. If I tune a query, I don’t want to find that I’m back in there, re-tuning it at some point. Strangely, if I re-solve a problem, that implies that I didn’t resolve it in the first place. I only solved it. Temporarily. We “data-folk” live in a world where the most common answer is “It depends.” Frustratingly, the thing an answer depends on may still be changing in the system in question. That probably means that any solution that is put in place may need reinvestigating at some point later. So do I resolve things? Yes. Am I Chuck Norris, and solve things so well the world would break first? No. Do these two claims happily sit beside each other? No, unfortunately not. But I happily take responsibility for things, and let my clients depend on me to see it through. As far as they are concerned, it is resolved. And so I resolve to keep resolving, right through 2011.

    Read the article

  • Cloning a dual boot system from HDD to SSD

    - by Alex
    I'm planning on replacing my laptop's HDD with a 256GB SSD, but I have a dual-boot (12.04 and Windows 7) setup and I'd like to be able to directly migrate Ubuntu over without having to reinstall and lose all of my settings. GParted reports the following partition setup on my HDD. I am, of course, able to modify it if necessary. /dev/sda1 (NTFS) 66.92 out of 200.00 MB used I'm honestly not sure what this partition is for. Maybe for Windows 7 system files? I'm hesitant to mess with it. (edit; it turns out it is a partition for Windows recovery files in the event of OS corruption, so I don't want to remove it. Plus it also appears to be a major pain to remove anyways) /dev/sda2 (NTFS) 116.35 out of 339.06 GB used (boot) This partition is the C:/ drive on my Windows installation. I don't use it on my Ubuntu installation, except it is the boot partition and thus has grub on it. /dev/sda4 (extended) > /dev/sda5 (ext4) 14.49 out of 91.34 GB used > /dev/sda6 (linux-swap) 5.92 GB These are my Ubuntu partitions. /sda5 contains my documents and all of the files I use on Ubuntu, and (as far as I know) the system files for Ubuntu itself (it's the partition I created when prompted by the Live-DVD installer). /sda6 is, of course, the swap partition which I only need for hibernation (6GB of RAM). /dev/sda3 (NTFS) 9.89 out of 14.75 GB used This is an annoying partition that Lenovo created to store some drivers and files that I might need later on. For example, it allows me to use OneKeyRecovery for a quick factory recovery if absolutely necessary, not sure if that'll work on an SSD. It also contains not-so-important files for bloatware installation. In total, my HDD only has about 150GB of files on it so it should fit comfortably on the SSD. The problem is, I want to exactly migrate my files, partitions, OSes, MBR, etc. from my HDD to my SSD and I'm not quite sure how to do this. I've seen CloneZilla referenced before, but I'm not all too experienced and the documentation for it quite frankly seems a bit like a foreign language to me. So, put simply, is there any way I can exactly clone this HDD to an SSD without a massive headache? Also, if it matters, I'll probably be using an external hard drive case (as recommended in online tutorials) to externally attach the SSD to my laptop during the cloning process due to the lack of two hard drive slots in the machine.

    Read the article

  • How to handle this unfortunately non hypothetical situation with end-users?

    - by User Smith
    I work in a medium sized company but with a very small IT force. Last year (2011), I wrote an application that is very popular with a large group of end-users. We hit a deadline at the end of last year and some functionality (I will call funcA from now on) was not added into the application that was wanted at the very end. So, this application has been running in live/production since the end of 2011, I might add without issue. Yesterday, a whole group of end-users started complaining that funcA that was never in the application is no longer working. Our priority at this company is that if an application is broken it must be fixed first prior to prioritized projects. I have compared code and queries and there is no difference since 2011, which is proofA. I then was able to get one of the end-users to admit that it never worked proofB, but since then that end-user has went back and said that it was working previously......I believe the horde of end-users has assimilated her. I have also reviewed my notes for this project which has requirements and daily updates regarding the project which specifically states, "funcA not achieved due to time constraints", proofC. I have spoken with many of them and I can see where they could be confused as they are very far from a programming background, but I also know they are intelligent enough to act in a group in order to bypass project prioritization orders in order to get functionality that they want to make their job easier. The worst part is is that now group think is setting in and my boss and the head of IT is actually starting to believe them, even though there is no code or query changes. As far as reviewing the state of the logic it is very cut and dry to the point of if 1 = 1, funcA will not work. So, this is the end of the description of my scenario, but I am trying not to get severally dinged on my performance metrics due to this which would essentially have me moved to fixing a production problem that doesn't exist that will probably take over 1 month. I am looking for direct answers to this question. This question is not for rants, polling, or discussions as this is not the format for StackExchange. Please don't downvote me too terribly it is pretty common on this specific site of stack, I am looking for honest answers to this situation and I couldn't find a forum more appropriate.

    Read the article

  • Oracle At QCon SF 2012

    - by Cassandra Clark - OTN
    Oracle Technology Network is a Platinum sponsor at QCon San Francisco.  (qconsf.com).  Don’t miss these great developer focused sessions: Shay ShmeltzerHow we simplified Web, Mobile and Cloud development for our own developers? - the Oracle StoryOver the past several years, Oracle has beendeveloping a new set of enterprise applications in what is probably one of thelargest Java based development project in the world. How do you take 3000 developers and make them productive? How do you insure the delivery of cutting edge UIs for both Mobile and Web channels? How do you enable Cloud baseddevelopment and deployment?  Come and learn how we did it at Oracle, and see how the same technologies and methodologies can apply to your development efforts. Dan SmithProject Lambda in Java 8Java SE 8 will include major enhancements to the Java Programming Language and its core libraries.  This suite of new features, known as Project Lambda in the OpenJDK community, includes lambda expressions, default methods, and parallel collections (and much more!).  The result will be a next-generation Java programming experience with more flexibility and better abstractions.   This talk will introduce the new Java features and offer a behind-the-scenes view of how they evolved and why they work the way that they do. Arun GuptaJSR 356: Building HTML5 WebSocket Applications in JavaThe family of HTML5 technologies has pushed the pendulum away from rich client technologies and toward ever-more-capable Web clients running on today’s browsers. In particular, WebSocket brings new opportunities for efficient peer-to-peer communication, providing the basis for a new generation of interactive and “live” Web applications. This session examines the efforts under way to support WebSocket in the Java programming model, from its base-level integration in the Java Servlet and Java EE containers to a new, easy-to-use API and toolset that are destined to become part of the standard Java platform. The full conference schedule is here: http://qconsf.com/sf2012/schedule/wednesday.jsp But wait, there’s more!  At the Oracle booth, we’ll also be covering: ·         Oracle ADF Mobile·         Oracle Developer Cloud Service·         Oracle ADF Essentials·         NetBeans Project Easel Lastly we’ll share the results of a short cloud survey at QConSF ater this week.  If you attended this year's Oracle OpenWorld and JavaOne conferences, it would be hard not to notice that Oracle is clearly "all-in" when it comes to the Cloud.  With Cloud computing being such a hot topic on many OTN members' minds, we'd like to know what you're doing in the cloud and invite you to take this short cloud survey.

    Read the article

  • Public Sector FMW Customer Tech Day in Reston, Tuesday Oct 7th

    - by BPMWarrior
    Have your heard? There is another PS FMW Customer Tech Day scheduled in the Oracle Reston office!                                                                                          Fusion Middleware Customer Tech Day                                                          October 7, 2014                                   Please join Oracle & Sofbang on Tuesday October 7th for our second Public Sector Oracle Fusion Middleware (OFMW) Customer Tech Day in Reston.   This Tech Day is designed with you the customer in mind. Come learn and share with other customers. This event will be centered on Mobility, App Advantage, WebCenter, SOA, BPM, Security and FMWaaS.   Sofbang enables customers to create, integrate and run agile intelligent business applications leveraging Oracle Fusion Middleware. Based out of Chicago, IL, Sofbang is recognized as an Oracle Platinum level Partner in the Oracle Partner Network. For more information on Sofbang, please visit www.sofbang.com   To confirm your attendance at this Event or for more information, please email [email protected]                                              

    Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >