Search Results

Search found 12439 results on 498 pages for 'wondering'.

Page 412/498 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

• How can I redirect/forward all the UDP/TCP traffic on one interface to another interface in OpenWrt

  - by Sina Sou

  I am new to networking and I have a measurement device (D) that periodically sends all its readings over few UDP multicast sockets (with different multicast IP addresses and different port numbers). That device even listens to a TCP socket simultaneously to modify its configuration on port 7234. Since the device has just a Ethernet interface for communication and I want to make it work wireless, I decided to use a very small wireless open-wrt based router that attaches to the device (D) and redirect/forward all the network traffic(Both UDP/TCP) to the router wireless interface. In order to simplify the problem assume that the Device (D) establishes following sockets (at the same time) UM_SOCK1: UDP mcast socket on 239.1.2.3 port# 50620 UM_SOCK2: UDP mcast socket on 239.1.2.4 port# 50640 TC_SOCK3: TCP DHCP/STATIC ip address 192.168.1.200 port 7234 And (D) is connected to Open-Wrt router (R) via interface en01 (Ethernet) the router has it own wireless interface on (wlan0) I want all the traffic from interface pass through wlan01 and vice versa (bi-directional) en01 <---- wlan01 What would be the minimum iptables or ... commands that I need to make this possible? Even I am wondering if traffic directing can be made easier like if the direction is not going to be based on IP addresses(not desired if the device is connected via DHCP) I would rather redirection to be Interface(en0) based or on MAC address (The best solution since my device has unique MAC address)? Thanks

  Read the article

• HTTP cache for my virtual machines

  - by MathematicalOrchid

  I have several Linux virtual machines running on my home PC. One of the quirks of Linux is that every time you run a package manager, it wants to "refresh" the configured software repositories - which basically means it wants to download a file from the Internet. If I revert to an earlier snapshot of the VM, then next time I run the package manager it will re-download the exact same data again [since it no longer exists in the VM]. It seems a shame to waste bandwidth endlessly downloading the same data over and over again, so I was wondering if there's some way I can set up some kind of HTTP proxy server that caches downloaded files. I have no idea how you would do such a thing though. In particular, it needs to be set up so that the VMs don't need to "know" that the cache is there; it needs to be transparent. But I don't know how to do that. Any suggestions on what software I'd need to use? It would be nice if I could run it under the Windows host OS, but running a small VM with a Linux guest is also possible...

  Read the article

• Multiple Remote Desktop Connection in Windows Server 2003?

  - by Joel Bradley

  My company is transitioning all user PC's to Windows 7 64-Bit in anticipation of the 2014 cutoff for Windows XP support. So far everything has been going great except for one specific piece of software that will not run in Windows 7. The current plan is to give everyone a cheap secondary PC to run this software but I feel that's a little much for software that's not even used all the time, although it is essential. I've suggested we install virtual machines but the company does not want to pay for the XP licences. I have access to a copy of Windows Server 2003 that is no longer being used and I was wondering if it was possible to create a remote desktop server. I know it can be done on a one-to-one basis, but this is a 15 person helpdesk. I'd like to be able to support multiple remote dekstop sessions, each with their own logins and dekstops. Is this possible? Are there any other alternatives to my issue? FYI, I've been told that XP mode is only free for consumers. There are costs when used in a corporate environment.

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• USB transfer speed for Windows 7 is incredibly slow to my external drive

  - by Wolfram

  I'm running Windows 7 Pro and am try to backup 116 GB of data to my external 1 TB hard drive. My laptop has only USB 2.0 ports and my hard drive is USB 3.0 compatible, as is the cable I'm using. I understand that the transfer speed should still be in accordance with USB 2.0 speeds. However, right now I'm getting 135 KB/s and it's been gradually dropping. For an earlier transfer, I would get between 4 MB/s to 8 MB/s. So, I'm really just wondering what's going on with my transfer rate and what I can do to improve it. I'm currently about 35 GB into the 116 GB transfer. Another strange thing is that the window which shows the transfer status decided to max out at 835 MB, and therefore shows items remaining as 0. However, it is still performing the rest of the transfer, and I can see it still cycling through files. Now that I think about it, it seems plausible that the speed being shown by the window is calculated merely as total data transferred / time elapsed. Since the "counter" of data, as far as what is being displayed in the window, maxed out at 835 MB, as time increases, the speed shown is going to keep decreasing because the 'total data transferred' value isn't being incremented. So with that in mind, I suppose I don't actually know at what rate the data is being transferred currently. Nonetheless, my best speed earlier was only around 8 MB/s. Shouldn't USB 2.0 deliver closer to 35 MB/s? Also, if someone can tell me why the transfer status window is displaying the incorrect data information and how to fix this, that would also be appreciated.

  Read the article

• Mac OS X in Virtualbox says "You need to restart your computer"

  - by humoeba

  I've been trying to figure out for the past week how to get Snow Leopard reliably running in a VM. Right now I am using VirtualBox, and it runs fine for a while, but every once in a while (happened 3 times in the last few hours) I get the "You need to restart your computer" message. Unfortunately, it hasn't even lasted long enough to finish installing the operating system yet. I first tried VMWare, which was a pain to set up. I got it running ok, operating system installed, with the guest tools. Every once in a while though, it just stops running. I click inside the VM, and there's no mouse. It doesn't respond to keyboard input either. I have to reset the VM to get a response. I'm wondering if this is the same error. This happens with both Workstation and Player. Here is the tutorial I used for VirtualBox: http://www.sysprobs.com/iboot-loader-virtualbox-install-snow-leopard Here's the tutorial I used for VMWare: http://bobhood.wordpress.com/2009/12/18/welcome-to-snow-leopard-mac-os-x-10-6-and-vmware-workstation-7/ I'm using an iso for Mac OS X 10.6.3. I have an HP Pavilion dm4 with an Intel Core i7 M640 running Windows 7; VT is turned on. Using VirtualBox 4.0.4 and VMWare Workstation 7.0.1 and VMWare Player 3.0.1 Does anyone know what might be causing this error or how I can fix it? Thanks.

  Read the article

• Exchange 2007 with Android activesync

  - by lbanz

  A few of our users noticed that it will stop working intermittently for them. I didn't believe it at first until I changed my android phone and it started occuring for me. It will just stop syncing completely, it looks like the server is blocking the device completely. This mainly occurs when they are using the wifi. I've done some testing. If I switch off the wifi and use the phone data plan it will work fine. When it's on the wifi network, I try and browse to the webmail/owa page and it says page not found! I did a dns lookup and they resolve correctly. If I use another device on the same wifi network, it can access the exchange servers fine. Sometimes the wifi network will just work without any issues. But when it fails, it looks like the phone constantly checks the server every second to see if it is online even though I've got it on manual sync. I was wondering whether it tries to sync too many times and exchange thinks its a denial service attack. My old android phone that works is Froyo and the new one is Icecream. People who have reported issues seems to be newer phones. They also tested their own wifi network at home and experience the same problem. We haven't patch our exchange recently before seeing this problem. Anyone has seen this issue?

  Read the article

• Using rsync to migrate files between windows servers: problems with Excel spreadsheets

  - by HorusKol

  We've been migrating about 220 GB of data from a Windows 2003 Server to a Windows 2008 Server, and because of the time it would take to copy that data and the necessity of keeping it available for users, I came up with the idea of using rsync on an Ubuntu server to broker the migration. (I might have gone for a proper Windows solution - but the applications I found were a bit pricey for a one-shot like this - and permissions are not a problem). All well and good - and today I'm making the last sync and confirming that the new server is up-to-date using diff, but I"ve noticed an odd thing with Excel spreadsheets (.xls). Every instance of an Excel spreadsheet that has already been copied in a previous in a previous synchronisation is being marked as "already up-to-date" by rsync. However, when I then run a diff, I'm told that the files differ. I'm manually copying them, as there are but a handful, but I was wondering what might be causing this. No other filetype in the entire 220 GB tree has had any problem like this - just the Excel/xls files. It'd be great if someone could come up with an explanation.

  Read the article

• Windows 7 access denied to executables.. by what?

  - by stijn

  Ever since I started using Windows 7 this problem has been bothering me. From time to time I see similar questions popping up on misc forums, but never did I see an answer. Here are two scenarios that nearly always reproduce it: the explorer way with explorer, navigate to a directory containing at least one exe file go one directory up immediately delete the directory just navigated to yields Folder Acces Denied dialog stating You need permission to perform this action You require permission from Administrators to make changes to this folder, with the buttons try Again and Cancel hitting Try Again never works immediately. Waiting a minute or so and then clickig it again does work note: if in step 2 and waiting a minute or more before going up one directory, the problem does not occur and the folder can be deleted the visual studio way build a project producing an exe file run the executable then close it immediately build the project again (by changing a single character in a source file for example) yields fatal error LNK1168: cannot open /path/to/the.exe for writing note: if in step 2 and waiting a minute or more before building again, the problem does not occur some specs happens both on Windows 7 32 and 64 bit, with VS2008/2010/2011 happens on 3 different machines I do not have a virusscanner of any kind I do have a bunch of services disabled, but nothing that prevents Windows from running normally, UAC is disabled as well happens on any type of disc I always use a user account that is in the Administrators group Obviously both scenarios are very similar and extremely reproducable. So I figured some process must have the file open for some reason, and release it again later. However, using systinternal's handle -a the exe file in question never shows up. (that is the correct way to use handle, right?) So while explorer/VS are reporting they cannot access the file, handle.exe says it's not in use anywhere. This leaves me rather clueless, so I'm wondering if someone can come up with a solution: why does this happen, and how to solve it?

  Read the article

• How do you get AWS VPC EC2 instances to be able to see the AWS APIs?

  - by Peter Mounce

  We're spinning up infrastructure inside of an AWS VPC via CloudFormation. We're using auto-scaling groups to bring up VPC-EC2 instances (so, we don't bring up instances directly; ASGs manage that). Inside of a PVC, EC2 instances only have a private IP; they cannot see the outside world without further work. When these instances spin up, we have some bootstrap tasks that require talking to the various AWS APIs. We also have some ongoing tasks that require AWS API traffic. How are you tackling this apparent chicken-egg problem? We've read about: NAT instances - but don't like this so much because it's another layer to our stack. assigning elastic-IPs to each VPC instance that needs to talk - but a) they all do, and b) since we're using ASGs, we don't know which instances to assign EIPs to at provision-time, and c) we'd need to set up something to monitor those ASGs and assign EIPs when instances are terminated and replaced spinning up an instance (actually, a load-balanced pair, probably spanning AZs) to act as an AWS-API proxy for all API traffic I guess I'm wondering whether there's some kind of back-door we can open that allows our VPC EC2 instances access to the AWS API endpoints, but nothing else, for cheap-complexity setup, that doesn't add another network-hop layer to our infrastructure for serving requests.

  Read the article

• Is there any proper documentation for mod-evasive?

  - by Question Overflow

  mod_evasive20 is one of the loaded modules on my httpd server. I read good things about how it can stop a DOS attack and wanted to try it out on my localhost. A search for mod_evasive turns up a blog post by the author which briefly describes what it does. Other than that, I can't seem to find a reference or a documentation on the apache modules site. I was wondering whether it is a module recognised by Apache since there is no mention of it on its website. I have a mod_evasive.conf file sitting in the /etc/http/conf.d folder that contains the following lines: LoadModule evasive20_module modules/mod_evasive20.so <IfModule mod_evasive20.c> DOSHashTableSize 3097 DOSPageCount 2 DOSSiteCount 50 DOSPageInterval 1 DOSSiteInterval 1 DOSBlockingPeriod 10 </IfModule> My understanding from the setting is that if I were to click refresh or send a form more than two times in a one second interval, apache will issue a 403 error and bar me from the site for 10 seconds. But that is not happening on my localhost. And I would like to know the reason. Thanks.

  Read the article

• Recommended Smartphone for Reading PDFs [closed]

  - by mika

  This is as much a software than a hardware question. I use a lot of public transport and perhaps the best way to spend your time there is to read while listening to music. Currently I use Nokia E90 and Adobe Reader LE 2.5 (full version). I was wondering if there are any better alternatives? Requirements: at least 640px wide screen, preferably 800px physical size of the LCD display matters, it should be large, but the phone itself should be as small as possible. This favors touchscreen models PDF reader should be of high quality. It should render most PDFs correctly. Other important features include: full screen mode, keyboard controls for Page Down and page change, multiple zoom levels to adjust to the screen, opening recent documents at the last page read Downsides of E90 + Adobe Reader LE Phone is large compared to the display It is hard to read the display at sunlight Adobe Reader crashes the phone regularly, zoom could have more levels, doesn't remember last page EDIT: Switched to iPhone and GoodReader. Smaller physical screen width compared to E90 is a disimprovement, but other than that I'm happy. GoodReader is the highest quality smartphone PDF reader I've seen so far.

  Read the article

• When modern computers boot, what initial setup of RAM do they execute, and how does it exactly work?

  - by user272840

  I know the title reeks of confusion, and some of you might assume I am just wondering about how the computer boots in general, but I'm not. But I'll sort this out for you people now: 1.Onboard firmware is how mostly all modern computer devices work, whether or not with EFI/UEFI(even without "onboard firmware", older computers still employed bank switching, or similar methods with snap-in firmware, cartridges, etc.) 2.On startup there is no "programs" running in the traditional sense yet, i.e. no kernel, OS, user-applications; all of the instructions, especially the very first instruction, is specified by the Instruction Pointer, I am guessing. How is the IP/PC/etc. set to first point to an address for a BIOS/firmware/etc. instruction, and how do the BIOS instructions map themself out in memory prior to startup? 3.Aside from MMIO, BIOS uses certain RAM addresses to have instructions. The big ? comes in when I ask this ... how does BIOS do this? Conclusion: I am assuming that with the very first instruction there is an initial hardware setup for BIOS prior to complete OS bootup. What I want to know is if it's hardware engineered to always work this way, if there's another step in this bootup method I am missing, a gap of information I am unaware of, or how this all works from the very first instruction, and the RAM data itself.

  Read the article

• Does Active Directory on Server 2003 R2 support IPv6 subnets in Sites and Services?

  - by NorbyTheGeek

  I've been experimenting with IPv6 at our organization. The domain controllers (all 2003 R2) and most of the servers (2003 R2 / 2008 / 2008 R2) have IPv6 configured. We have a subnet assigned through a tunnel provider. Currently, the only workstation that is running IPv6 is mine. (Windows 7) I have been noticing that my workstation is picking domain controllers in other sites for things like DFS, and I finally realized that I don't have the IPv6 subnets set up in Active Directory Sites and Services (ADSS). But when I try to add a IPv6 prefix in ADSS, it tells me: Windows cannot create the object 2001:xxxx:xxxx:xxxx::/64 because: The object name has bad syntax. I believe I may be using the 2008 version of the admin tools (ADSS reports version 6.1.7601.17514) so I'm wondering if maybe my 2003 R2 Active Directory schema doesn't support configuring IPv6 subnets in ADSS. Is this true? UPDATE Even with 2008 R2 schema in Active Directory, I'm having the same problem. How can I get my IPv6 subnets into Sites and Services?

  Read the article

• Ubuntu 10.10 forgets desktop theme.

  - by Marcelo Cantos

  I am running Ubuntu in VirtualBox (on a Windows 7 host). Several times now, the top-level menu bar, the task bar — and seemingly every system dialog — have forgotten the out-of-the-box "Ambiance" theme they conform to when I first installed the system. Window captions still preserve the theme, but pretty much nothing else does. I have searched high and low on Google for assistance with this problem. Everything I've found suggests either running some gconf reset or deleting .gconf* .gnome* and other similar directories. I have followed all this advice and nothing works. I still get a boring Windows-95-style gray 3D look and feel. On previous occasions, after much messing around I've given up and rebooted the VM instance, and been pleasantly suprised to see the original "Ambience" theme restored throughout the UI, but invariably it disappears again some time later, usually after a reboot, so I can never figure out what I did that broke it. Here's a sample from Ubuntu's site of what I want it to look like. And here's a screenshot of my system as it currently looks. Also note that my GNOME Terminals normally have a nice purple semi-translucent look, and as can be seen from the screenshot, they are now just a solid matt white. This last time (just this morning), trying numerous combinations all the usual tricks and rebooting several times hasn't fixed it, so here I am on SU wondering: How do I recover the out-of-the-box theme for my Gnome/Ubuntu desktop, noting that blowing away all config files — as suggested in many places online — fails to achieve this? EDIT: It might help to know that it seems to fail either after I resize the VM instance, forcing the Ubuntu desktop to resize itself, or after I play around with Compiz settings. I haven't been able to figure out which of these it is, and it could be neither. Given the amount of pain I have had to go through to get things back to normal (and given that I am at a loss as to how to do so), it has proven difficult to definitively isolate the cause.

  Read the article

• How can visiting a webpage infect your computer?

  - by Cybis

  My mother's computer recently became infected with some sort of rootkit. It began when she received an email from a close friend asking her to check out some sort of webpage. I never saw it, but my mother said it was just a blog of some sort, nothing interesting. A few days later, my mother signed in on the PayPal homepage. PayPal gave some sort of security notice which stated that to prevent fraud, they needed some additional personal information. Among some of the more normal information (name, address, etc.), they asked for her SSN and bank PIN! She refused to submit that information and complained to PayPal that they shouldn't ask for it. PayPal said they would never ask for such information and that it wasn't their webpage. There was no such "security notice" when she logged in from a different computer, only from hers. It wasn't a phishing attempt or redirection of some sort, IE clearly showed an SSL connection to https://www.paypal.com/ She remembered that strange email and asked her friend about it - the friend never sent it! Obviously, something on her computer was intercepting the PayPal homepage and that email was the only other strange thing to happen recently. She entrusted me to fix everything. I nuked the computer from orbit since it was the only way to be sure (i.e., reformatted her hard drive and did a clean install). That seemed to work fine. But that got me wondering... my mother didn't download and run anything. There were no weird ActiveX controls running (she's not computer illiterate and knows not to install them), and she only uses webmail (i.e., no Outlook vulnerability). When I think webpages, I think content presentation - JavaScript, HTML, and maybe some Flash. How could that possibly install and execute arbitrary software on your computer? It seems kinda weird/stupid that such vulnerabilities exist.

  Read the article

• Hosting multiple websites from home

  - by dean nolan

  I have just been accepted for Microsofts Wevsite Spark program which I mainly got for the tools, Visual Studio, Blend. I also have a few of my own websites, personal and a couple of business ones. I also work freelance and sometimes I would like a place to just put a demo up of a clients project. The websites I currently have are all on differnet hosting provders and domain registrars. The WebsiteSpark comes with Windows Server 2008 and SQL Server 2008. It would be really advantagous of me to have all these in one place but also so I have complete control over the database and the environment. So I am thinking over the next 4-6 months of migrating all this to my own server that I will host from home, or maybe even setup at home and then store in a proper datacentre. I was wondering what steps I should take and what to be aware of, specifically: 1) having all these different websites on one computer and having the url got to the proper place. 2) Cost effectiveness? Having the server in home as apposed to datacentre. Most solutions I see charge over £1000 a month to have a machine in datacentre. This is mostly for my own ease of management and shared hosting which I currently have is very limited configuration wise. Would getting a server in house be beneficial for then upgrading to the cloud? What measures should I take with my ISP? I know this is a lot I've asked but just even links to good articles would be good. Thanks

  Read the article

• Is it okay to use an administrator account for everyday use if UAC is on?

  - by Valentin Radu

  Since I switched to Windows 7 about 3 years ago, and now using Windows 8.1, I have become familiar with the concept of User Account Control and used my PC the following way: a standard account which I use for every day work and the built-in Administrator account activated and used only to elevate processes when they request so, or to ”Run as administrator” applications when I need to. However, recently after reading more about User Account Control, I started wondering if my way of working is good? Or should I use an administrator account for every day work, since an administrator account is not elevated until requested by apps, or until I request so via the ”Run as administrator” option? I am asking this because I read somewhere that the built-in Administrator account is a true administrator, by which I mean UAC doesn't pop up when logged in within it, and I am scared of not having problems when potential malicious software come into scene. I have to mention that I do not use it on a daily basis, just when I need to elevate some apps. I barely log in into it 10 times a year... So, how's better? Thanks for your answers! And Happy New Year, of course! P.S. I asked this a year ago (:P) and I think I should reiterate it: is an administrator account as safe these days as a standard account coupled with the built-in Administrator account when needed?

  Read the article

• Can a USB/IDE/SATA adapter be flaky?

  - by Ward

  I use USB/IDE/SATA converters a lot and on the two that I have now, I sometimes get errors copying files to drives. It only happens when I'm copying big files to the drive (big can mean as little as 100MB, I think it happens more often with bigger files - 300MB or more), and basically the copy will fail and I'll get one or more error messages about "Delayed write failed." But if I disconnect the drive and re-connect it, I'll usually be able to continue. (The file that was being copied will be corrupt, but otherwise the drive is fine.) I just noticed a new type of flakiness: the data transfer rate can vary widely. I copied one set of files (5x300MB files) and it took 10+minutes, then I copied another set (approx. the same sizes) and it took less than a minute. I haven't done systematic testing, the other things I'm doing on my laptop at the same time might have some impact, and I haven't cross-checked the two adapters I have and the 3 hard drives I'm working with to see if there's a pattern. I'm more wondering if anyone else has seen anything like this.

  Read the article

• Installing Debian 7.1 on FakeRAID/Intel Z77 results in boot with no grub menu

  - by user198982

  I'm trying to install Debian 7.1 from DVD onto 2x500GB drives which are set up in a FakeRAID mirror using the on-board FakeRAID provided by the Z77 chipset. I have followed the guide here https://wiki.debian.org/DebianInstaller/SataRaid. Namely, I booted into the expert install with the 'dmraid=true' option added, installed onto the RAID mirror which the installer correctly detected, then installed grub2 onto /dev/mapper/.. raid volume. I chose to use LVM (so a boot partition + LVM volume). As per the guide, I have uncommented the "GRUB_DISABLE_LINUX_UUID=true" line in "/etc/default/grub" and ran "update-grub" then "grub-install /dev/mapper/.." (with the right RAID device in the command). However, after I rebooted the system, all I got was a grub console. It did not load the menu. I checked and it seems that it never even generated a menu file. I re-installed Debian a few times since, trying out different options and also a few workarounds people posted online, but to no avail. The best I am getting is a grub console. No menu. Some times it will generate the grub.cfg, some times it won't, depending on the workaround I try. I was wondering if anyone else has experienced this issue. There is no need to preach how I should not use FakeRAID. I have seen others trying to figure this out so I think a resolution to this issue would be of interest to more than just me. Also, I first installed the system onto a small drive for testing something else. I made a backup with Acronis and was able to restore that onto the RAID mirror by using Universal Restore. When I installed it onto a 500GB without RAID, backed up using the same method, then restored onto a RAID volume of the same size, it would not boot and I got grub errors. Weird. I can post more details, just let me know what you want to see.

  Read the article

• F5 BIG_IP persistence iRules applied but not affecting selected member

  - by zoli

  I have a virtual server. I have 2 iRules (see below) assigned to it as resources. From the server log it looks like that the rules are running and they select the correct member from the pool after persisting the session (as far as I can tell based on my log messages), but the requests are ultimately directed to somewhere else. Here's how both rules look like: when HTTP_RESPONSE { set sessionId [HTTP::header X-SessionId] if {$sessionId ne ""} { persist add uie $sessionId 3600 log local0.debug "Session persisted: <$sessionId> to <[persist lookup uie $sessionId]>" } } when HTTP_REQUEST { set sessionId [findstr [HTTP::path] "/session/" 9 /] if {$sessionId ne ""} { persist uie $sessionId set persistValue [persist lookup uie $sessionId] log local0.debug "Found persistence key <$sessionId> : <$persistValue>" } } According to the log messages from the rules, the proper balancer members are selected. Note: the two rules can not conflict, they are looking for different things in the path. Those two things never appear in the same path. Notes about the server: * The default load balancing method is RR. * There is no persistence profile assigned to the virtual server. I'm wondering if this should be adequate to enable the persistence, or alternatively, do I have to combine the 2 rules and create a persistence profile with them for the virtual server? Or is there something else that I have missed?

  Read the article

• hyper-v cluster behavior when losing network connectivity

  - by ChristopheD

  Setup: (rather new) Hyper-V R2 cluster with 2 nodes (in failover configuration). Fysical host OS: Windows Server 2008. About eight VM's (mixed: Windows Server 2008 and Linux) Yesterday we had a power outage of about 15 minutes. Our blades are on UPS so the fysical host machines (Windows Server 2008) never went down. Our main switches are not on UPS (yet) and we saw the behaviour similar to the following (as distilled from the event logs). The nodes in the cluster lost means of communication (because the external switches went down). The cluster wants to bring down one (the first) of the nodes (to start failover?). The previous step impacts clustered storage where the virtual machine VHD's are located. All VM's got brutally terminated and were found in a failed state in the failover manager in the host OS'es. The Linux VM's were kernel panicking and looked like they had their disk ripped out. This whole setup is rather new to us, so we are still learning about this. The question: We are putting switches on UPS soon but were wondering if the above is expected behavior (seems rather fragile) or if there are obvious improvements configuration-wise to handle such scenario's ? I can upload an evtx file concerning what exactly was going on in case that's necessary.

  Read the article

• The suggested way to handle pip(easy_install) with homebrew?

  - by Drake

  I know there are brew-gem and brew-pip but it is still really easy to get confused. Let's say my Mac OS X is 10.7.2. There are at least, as far as I know, 3 locations for Python modules (assume 2.7): /System/Library/Frameworks/Python.framework/Versions/2.7/ /Library/Python/2.7/site-packages /usr/local/lib/python2.7/site-packages/ (controlled within homebrew) For some Python modules, pip install them into 2, the so-called local/customized Python module location, and everything looks and works great. Ex, readline by *easy_install* (ipython suggested me to install readline by *easy_install* instead of pip) For some, it would try to install some miscellaneous files (ex, man, doc, ...) into system-wide location, which requires sudo! Ex, ipython insisted on installing man and doc into /System/Library/Frameworks/Python.framework/Versions/2.7/share/, which violates permission issue and all I can do is to use sudo. For some Python modules installed by brew, they are symbolic linked to /usr/local/lib/python2.7/site-packages/. Everything seems great except that you have to remember to add this location into PYTHONPATH. I am wondering any suggested and uniform way to handle those mass, or any explanation to make those stuff crystal clear.

  Read the article

• How to install Windows with no CD drive boot option in BIOS?

  - by Kris Hollenbeck

  I have a new computer which I built from scratch and I am trying to install a copy of Windows Vista on it. I am able to get to the BIOS and change the boot options which are as follows.. -Built-in EFI Shell -SATA: ST31000528AS I have searched around for and everything I find says to boot from the CD rom. However, as you can see. That is not an option for me. So I am wondering if there is another way around this? Is it possible to boot the Disk from the EFI Shell? Any help is much appreciated. Thanks EDIT: I have tried this.. http://technet.microsoft.com/en-us/library/dd744321%28v=ws.10%29.aspx UPDATE: I managed to make my USB bootable via the BIOS and I have copied my windows Vista disk onto my USB via drag and drop. However I am still not able to get the windows install to start. Also I have tried booting it from the EFI shell using the following command.. blk6: blk6:\> \EFI\BOOT\BOOTX64.EFI Still no luck..

  Read the article

• I want to replace a number with successive numbers, starting at 1 and going up.

  - by Pär-Magnus Green

  I'm aware that this is something people can easily program, but I'm not familiar with those things, so I was hoping there was an easier solution. I've edited a large database of questions, including sorting, and ended up getting all the question ID's mixed up. I'm trying to do this in Notepad++, but any other suggestions are welcome. I'm wondering if there's a way to search for a string (ex. "Question[any number]") and replace the numbers with first 1, then 2, et.c. For clarification, this is how one question looks like: TriviaBot_Questions[3]['Question'][63] = "Acronyms: What does WTT stand for?"; TriviaBot_Questions[3]['Answers'][63] = {"Want To Trade"}; TriviaBot_Questions[3]['Category'][63] = 7; TriviaBot_Questions[3]['Points'][63] = 1; TriviaBot_Questions[3]['Hints'][63] = {}; and the next question, as is now, is not followed by 64. It might be 245 or 1029, and regardless of which number it is, I want it replaced with "previous number + 1", basically.

  Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >