set identity insert - Page 413

Is it possible to cache all the data in a SQL Server CE database using LinqToSql?

- by DanM

I'm using LinqToSql to query a small, simple SQL Server CE database. I've noticed that any operations involving sub-properties are disappointingly slow. For example, if I have a Customer table that is referenced by an Order table, LinqToSql will automatically create an EntitySet<Order> property. This is a nice convenience, allowing me to do things like Customer.Order.Where(o => o.ProductName = "Stopwatch"), but for some reason, SQL Server CE hangs up pretty bad when I try to do stuff like this. One of my queries, which isn't really that complicated takes 3-4 seconds to complete. I can get the speed up to acceptable, even fast, if I just grab the two tables individually and convert them to List<Customer> and List<Order>, then join then manually with my own query, but this is throwing out a lot of what makes LinqToSql so appealing. So, I'm wondering if I can somehow get the whole database into RAM and just query that way, then occasionally save it. Is this possible? How? If not, is there anything else I can do to boost the performance besides resorting to doing all the joins manually? Note: My database in its initial state is about 250K and I don't expect it to grow to more than 1-2Mb. So, loading the data into RAM certainly wouldn't be a problem from a memory point of view. Update Here are the table definitions for the example I used in my question: create table Order ( Id int identity(1, 1) primary key, ProductName ntext null ) create table Customer ( Id int identity(1, 1) primary key, OrderId int null references Order (Id) )

Read the article

Load Empty Database table

- by john White

I am using SQLexpress and VS2008. I have a DB with a table named "A", which has an IdentitySpecification column named ID. The ID is auto-incremented. Even if the row is deleted, the ID still increases. After several data manipulation, the current ID has reached 15, for example. When I run the application if there's at least 1 row: if I add a new row, the new ID is 16. Everything is fine. If the table is empty (no row): if I add a new row, the new ID is 0, which is an error (I think). And further data manipulation (eg. delete or update) will result in an unhandled exception. Has anyone encountered this? PS. In my table definition, the ID has been selected as follow: Identity Increment = 1; Identity Seed =1; The DB load code is: dataSet = gcnew DataSet(); dataAdapter->Fill(dataSet,"A"); dataTable=dataSet->Tables["A"]; dbConnection->Open(); The Update button method dataAdapter->Update(dataSet,"tblInFlow"); dataSet->AcceptChanges(); dataTable=dataSet->Tables["tblInFlow"]; dataGrid->DataSource=dataTable; If I press Update: if there's at least a row: the datagrid view updates and shows the table correctly. if there's nothing in the table (no data row), the Add method will add a new row, but from ID 0. If I close the program and restart it again: the ID would be 16, which is correct. This is the add method row=dataTable->NewRow(); row["column1"]="something"; dataTable->Rows->Add(row); dataAdapter->Update(dataSet,"A"); dataSet->AcceptChanges(); dataTable=dataSet->Tables["A"];

Read the article

trouble with state monad composition

- by user1308560

I was trying out the example given at http://www.haskell.org/haskellwiki/State_Monad#Complete_and_Concrete_Example_1 How this makes the solution composible is beyond my understanding. Here is what I tried but I get compile errors as follows: Couldn't match expected type `GameValue -> StateT GameState Data.Functor.Identity.Identity b0' with actual type `State GameState GameValue' In the second argument of `(>>=)', namely `g2' In the expression: g1 >>= g2 In an equation for `g3': g3 = g1 >>= g2 Failed, modules loaded: none. Here is the code: See the end lines module StateGame where import Control.Monad.State type GameValue = Int type GameState = (Bool, Int) -- suppose I want to play one game after the other g1 = playGame "abcaaacbbcabbab" g2 = playGame "abcaaacbbcabb" g3 = g1 >>= g2 m2 = print $ evalState g3 startState playGame :: String -> State GameState GameValue playGame [] = do (_, score) <- get return score playGame (x:xs) = do (on, score) <- get case x of 'a' | on -> put (on, score + 1) 'b' | on -> put (on, score - 1) 'c' -> put (not on, score) _ -> put (on, score) playGame xs startState = (False, 0) main str = print $ evalState (playGame str) startState

Read the article

swap! alter and alike

- by mekka

Hello, I am having a problem understanding how these functions update the underlying ref, atom etc. The docs say: (apply f current-value-of-identity args) (def one (atom 0)) (swap! one inc) ;; => 1 So I am wondering how it got "expanded" to the apply form. It's not mentioned what exactly 'args' in the apply form is. Is it a sequence of arguments or are these separate values? Was it "expanded" to: (apply inc 0) ; obviously this wouldnt work, so that leaves only one possibility (apply inc 0 '()) (swap! one + 1 2 3) ;; #=> 7 Was it: (apply + 1 1 2 3 '()) ;or (apply + 1 [1 2 3]) (def two (atom [])) (swap! two conj 10 20) ;; #=> [10 20] Was it: (apply conj [] [10 20]) ;or (apply conj [] 10 20 '()) If I swap with a custom function like this: (def three (atom 0)) (swap! three (fn [current elem] (println (class elem))) 10) ;;#=> java.Lang.Integer Which means that the value '10' doesnt magically get changed into a seq '(10) and leads me to the conclusion, that it gets "expanded" to: (apply f current-value-of-identity arg1 arg2 arg3... '()) Is that a correct assumption and the docs are simply lacking a better description?

Read the article

Using an alternate JSON Serializer in ASP.NET Web API

- by Rick Strahl

The new ASP.NET Web API that Microsoft released alongside MVC 4.0 Beta last week is a great framework for building REST and AJAX APIs. I've been working with it for quite a while now and I really like the way it works and the complete set of features it provides 'in the box'. It's about time that Microsoft gets a decent API for building generic HTTP endpoints into the framework. DataContractJsonSerializer sucks As nice as Web API's overall design is one thing still sucks: The built-in JSON Serialization uses the DataContractJsonSerializer which is just too limiting for many scenarios. The biggest issues I have with it are: No support for untyped values (object, dynamic, Anonymous Types) MS AJAX style Date Formatting Ugly serialization formats for types like Dictionaries To me the most serious issue is dealing with serialization of untyped objects. I have number of applications with AJAX front ends that dynamically reformat data from business objects to fit a specific message format that certain UI components require. The most common scenario I have there are IEnumerable query results from a database with fields from the result set rearranged to fit the sometimes unconventional formats required for the UI components (like jqGrid for example). Creating custom types to fit these messages seems like overkill and projections using Linq makes this much easier to code up. Alas DataContractJsonSerializer doesn't support it. Neither does DataContractSerializer for XML output for that matter. What this means is that you can't do stuff like this in Web API out of the box:public object GetAnonymousType() { return new { name = "Rick", company = "West Wind", entered= DateTime.Now }; } Basically anything that doesn't have an explicit type DataContractJsonSerializer will not let you return. FWIW, the same is true for XmlSerializer which also doesn't work with non-typed values for serialization. The example above is obviously contrived with a hardcoded object graph, but it's not uncommon to get dynamic values returned from queries that have anonymous types for their result projections. Apparently there's a good possibility that Microsoft will ship Json.NET as part of Web API RTM release. Scott Hanselman confirmed this as a footnote in his JSON Dates post a few days ago. I've heard several other people from Microsoft confirm that Json.NET will be included and be the default JSON serializer, but no details yet in what capacity it will show up. Let's hope it ends up as the default in the box. Meanwhile this post will show you how you can use it today with the beta and get JSON that matches what you should see in the RTM version. What about JsonValue? To be fair Web API DOES include a new JsonValue/JsonObject/JsonArray type that allow you to address some of these scenarios. JsonValue is a new type in the System.Json assembly that can be used to build up an object graph based on a dictionary. It's actually a really cool implementation of a dynamic type that allows you to create an object graph and spit it out to JSON without having to create .NET type first. JsonValue can also receive a JSON string and parse it without having to actually load it into a .NET type (which is something that's been missing in the core framework). This is really useful if you get a JSON result from an arbitrary service and you don't want to explicitly create a mapping type for the data returned. For serialization you can create an object structure on the fly and pass it back as part of an Web API action method like this:public JsonValue GetJsonValue() { dynamic json = new JsonObject(); json.name = "Rick"; json.company = "West Wind"; json.entered = DateTime.Now; dynamic address = new JsonObject(); address.street = "32 Kaiea"; address.zip = "96779"; json.address = address; dynamic phones = new JsonArray(); json.phoneNumbers = phones; dynamic phone = new JsonObject(); phone.type = "Home"; phone.number = "808 123-1233"; phones.Add(phone); phone = new JsonObject(); phone.type = "Home"; phone.number = "808 123-1233"; phones.Add(phone); //var jsonString = json.ToString(); return json; } which produces the following output (formatted here for easier reading):{ name: "rick", company: "West Wind", entered: "2012-03-08T15:33:19.673-10:00", address: { street: "32 Kaiea", zip: "96779" }, phoneNumbers: [ { type: "Home", number: "808 123-1233" }, { type: "Mobile", number: "808 123-1234" }] } If you need to build a simple JSON type on the fly these types work great. But if you have an existing type - or worse a query result/list that's already formatted JsonValue et al. become a pain to work with. As far as I can see there's no way to just throw an object instance at JsonValue and have it convert into JsonValue dictionary. It's a manual process. Using alternate Serializers in Web API So, currently the default serializer in WebAPI is DataContractJsonSeriaizer and I don't like it. You may not either, but luckily you can swap the serializer fairly easily. If you'd rather use the JavaScriptSerializer built into System.Web.Extensions or Json.NET today, it's not too difficult to create a custom MediaTypeFormatter that uses these serializers and can replace or partially replace the native serializer. Here's a MediaTypeFormatter implementation using the ASP.NET JavaScriptSerializer:using System; using System.Net.Http.Formatting; using System.Threading.Tasks; using System.Web.Script.Serialization; using System.Json; using System.IO; namespace Westwind.Web.WebApi { public class JavaScriptSerializerFormatter : MediaTypeFormatter { public JavaScriptSerializerFormatter() { SupportedMediaTypes.Add(new System.Net.Http.Headers.MediaTypeHeaderValue("application/json")); } protected override bool CanWriteType(Type type) { // don't serialize JsonValue structure use default for that if (type == typeof(JsonValue) || type == typeof(JsonObject) || type== typeof(JsonArray) ) return false; return true; } protected override bool CanReadType(Type type) { if (type == typeof(IKeyValueModel)) return false; return true; } protected override System.Threading.Tasks.Taskobject OnReadFromStreamAsync(Type type, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext) { var task = Taskobject.Factory.StartNew(() = { var ser = new JavaScriptSerializer(); string json; using (var sr = new StreamReader(stream)) { json = sr.ReadToEnd(); sr.Close(); } object val = ser.Deserialize(json,type); return val; }); return task; } protected override System.Threading.Tasks.Task OnWriteToStreamAsync(Type type, object value, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext, System.Net.TransportContext transportContext) { var task = Task.Factory.StartNew( () = { var ser = new JavaScriptSerializer(); var json = ser.Serialize(value); byte[] buf = System.Text.Encoding.Default.GetBytes(json); stream.Write(buf,0,buf.Length); stream.Flush(); }); return task; } } } Formatter implementation is pretty simple: You override 4 methods to tell which types you can handle and then handle the input or output streams to create/parse the JSON data. Note that when creating output you want to take care to still allow JsonValue/JsonObject/JsonArray types to be handled by the default serializer so those objects serialize properly - if you let either JavaScriptSerializer or JSON.NET handle them they'd try to render the dictionaries which is very undesirable. If you'd rather use Json.NET here's the JSON.NET version of the formatter:// this code requires a reference to JSON.NET in your project #if true using System; using System.Net.Http.Formatting; using System.Threading.Tasks; using System.Web.Script.Serialization; using System.Json; using Newtonsoft.Json; using System.IO; using Newtonsoft.Json.Converters; namespace Westwind.Web.WebApi { public class JsonNetFormatter : MediaTypeFormatter { public JsonNetFormatter() { SupportedMediaTypes.Add(new System.Net.Http.Headers.MediaTypeHeaderValue("application/json")); } protected override bool CanWriteType(Type type) { // don't serialize JsonValue structure use default for that if (type == typeof(JsonValue) || type == typeof(JsonObject) || type == typeof(JsonArray)) return false; return true; } protected override bool CanReadType(Type type) { if (type == typeof(IKeyValueModel)) return false; return true; } protected override System.Threading.Tasks.Taskobject OnReadFromStreamAsync(Type type, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext) { var task = Taskobject.Factory.StartNew(() = { var settings = new JsonSerializerSettings() { NullValueHandling = NullValueHandling.Ignore, }; var sr = new StreamReader(stream); var jreader = new JsonTextReader(sr); var ser = new JsonSerializer(); ser.Converters.Add(new IsoDateTimeConverter()); object val = ser.Deserialize(jreader, type); return val; }); return task; } protected override System.Threading.Tasks.Task OnWriteToStreamAsync(Type type, object value, System.IO.Stream stream, System.Net.Http.Headers.HttpContentHeaders contentHeaders, FormatterContext formatterContext, System.Net.TransportContext transportContext) { var task = Task.Factory.StartNew( () = { var settings = new JsonSerializerSettings() { NullValueHandling = NullValueHandling.Ignore, }; string json = JsonConvert.SerializeObject(value, Formatting.Indented, new JsonConverter[1] { new IsoDateTimeConverter() } ); byte[] buf = System.Text.Encoding.Default.GetBytes(json); stream.Write(buf,0,buf.Length); stream.Flush(); }); return task; } } } #endif One advantage of the Json.NET serializer is that you can specify a few options on how things are formatted and handled. You get null value handling and you can plug in the IsoDateTimeConverter which is nice to product proper ISO dates that I would expect any Json serializer to output these days. Hooking up the Formatters Once you've created the custom formatters you need to enable them for your Web API application. To do this use the GlobalConfiguration.Configuration object and add the formatter to the Formatters collection. Here's what this looks like hooked up from Application_Start in a Web project:protected void Application_Start(object sender, EventArgs e) { // Action based routing (used for RPC calls) RouteTable.Routes.MapHttpRoute( name: "StockApi", routeTemplate: "stocks/{action}/{symbol}", defaults: new { symbol = RouteParameter.Optional, controller = "StockApi" } ); // WebApi Configuration to hook up formatters and message handlers // optional RegisterApis(GlobalConfiguration.Configuration); } public static void RegisterApis(HttpConfiguration config) { // Add JavaScriptSerializer formatter instead - add at top to make default //config.Formatters.Insert(0, new JavaScriptSerializerFormatter()); // Add Json.net formatter - add at the top so it fires first! // This leaves the old one in place so JsonValue/JsonObject/JsonArray still are handled config.Formatters.Insert(0, new JsonNetFormatter()); } One thing to remember here is the GlobalConfiguration object which is Web API's static configuration instance. I think this thing is seriously misnamed given that GlobalConfiguration could stand for anything and so is hard to discover if you don't know what you're looking for. How about WebApiConfiguration or something more descriptive? Anyway, once you know what it is you can use the Formatters collection to insert your custom formatter. Note that I insert my formatter at the top of the list so it takes precedence over the default formatter. I also am not removing the old formatter because I still want JsonValue/JsonObject/JsonArray to be handled by the default serialization mechanism. Since they process in sequence and I exclude processing for these types JsonValue et al. still get properly serialized/deserialized. Summary Currently DataContractJsonSerializer in Web API is a pain, but at least we have the ability with relatively limited effort to replace the MediaTypeFormatter and plug in our own JSON serializer. This is useful for many scenarios - if you have existing client applications that used MVC JsonResult or ASP.NET AJAX results from ASMX AJAX services you can plug in the JavaScript serializer and get exactly the same serializer you used in the past so your results will be the same and don't potentially break clients. JSON serializers do vary a bit in how they serialize some of the more complex types (like Dictionaries and dates for example) and so if you're migrating it might be helpful to ensure your client code doesn't break when you switch to ASP.NET Web API. Going forward it looks like Microsoft is planning on plugging in Json.Net into Web API and make that the default. I think that's an awesome choice since Json.net has been around forever, is fast and easy to use and provides a ton of functionality as part of this great library. I just wish Microsoft would have figured this out sooner instead of now at the last minute integrating with it especially given that Json.Net has a similar set of lower level JSON objects JsonValue/JsonObject etc. which now will end up being duplicated by the native System.Json stuff. It's not like we don't already have enough confusion regarding which JSON serializer to use (JavaScriptSerializer, DataContractJsonSerializer, JsonValue/JsonObject/JsonArray and now Json.net). For years I've been using my own JSON serializer because the built in choices are both limited. However, with an official encorsement of Json.Net I'm happily moving on to use that in my applications. Let's see and hope Microsoft gets this right before ASP.NET Web API goes gold.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api AJAX ASP.NET Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

An easy way to create Side by Side registrationless COM Manifests with Visual Studio

- by Rick Strahl

Here's something I didn't find out until today: You can use Visual Studio to easily create registrationless COM manifest files for you with just a couple of small steps. Registrationless COM lets you use COM component without them being registered in the registry. This means it's possible to deploy COM components along with another application using plain xcopy semantics. To be sure it's rarely quite that easy - you need to watch out for dependencies - but if you know you have COM components that are light weight and have no or known dependencies it's easy to get everything into a single folder and off you go. Registrationless COM works via manifest files which carry the same name as the executable plus a .manifest extension (ie. yourapp.exe.manifest) I'm going to use a Visual FoxPro COM object as an example and create a simple Windows Forms app that calls the component - without that component being registered. Let's take a walk down memory lane… Create a COM Component I start by creating a FoxPro COM component because that's what I know and am working with here in my legacy environment. You can use VB classic or C++ ATL object if that's more to your liking. Here's a real simple Fox one: DEFINE CLASS SimpleServer as Session OLEPUBLIC FUNCTION HelloWorld(lcName) RETURN "Hello " + lcName ENDDEFINE Compile it into a DLL COM component with: BUILD MTDLL simpleserver FROM simpleserver RECOMPILE And to make sure it works test it quickly from Visual FoxPro: server = CREATEOBJECT("simpleServer.simpleserver") MESSAGEBOX( server.HelloWorld("Rick") ) Using Visual Studio to create a Manifest File for a COM Component Next open Visual Studio and create a new executable project - a Console App or WinForms or WPF application will all do. Go to the References Node Select Add Reference Use the Browse tab and find your compiled DLL to import Next you'll see your assembly in the project. Right click on the reference and select Properties Click on the Isolated DropDown and select True Compile and that's all there's to it. Visual Studio will create a App.exe.manifest file right alongside your application's EXE. The manifest file created looks like this: xml version="1.0" encoding="utf-8"? assembly xsi:schemaLocation="urn:schemas-microsoft-com:asm.v1 assembly.adaptive.xsd" manifestVersion="1.0" xmlns:asmv1="urn:schemas-microsoft-com:asm.v1" xmlns:asmv2="urn:schemas-microsoft-com:asm.v2" xmlns:asmv3="urn:schemas-microsoft-com:asm.v3" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#" xmlns:co.v1="urn:schemas-microsoft-com:clickonce.v1" xmlns:co.v2="urn:schemas-microsoft-com:clickonce.v2" xmlns="urn:schemas-microsoft-com:asm.v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / file name="simpleserver.DLL" asmv2:size="27293" hash xmlns="urn:schemas-microsoft-com:asm.v2" dsig:Transforms dsig:Transform Algorithm="urn:schemas-microsoft-com:HashTransforms.Identity" / dsig:Transforms dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" / dsig:DigestValuepuq+ua20bbidGOWhPOxfquztBCU=dsig:DigestValue hash typelib tlbid="{f10346e2-c9d9-47f7-81d1-74059cc15c3c}" version="1.0" helpdir="" resourceid="0" flags="HASDISKIMAGE" / comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" tlbid="{f10346e2-c9d9-47f7-81d1-74059cc15c3c}" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file assembly Now let's finish our super complex console app to test with: using System; using System.Collections.Generic; using System.Text; namespace ConsoleApplication1 { class Program { static voidMain(string[] args) { Type type = Type.GetTypeFromProgID("simpleserver.simpleserver",true); dynamic server = Activator.CreateInstance(type); Console.WriteLine(server.HelloWorld("rick")); Console.ReadLine(); } } } Now run the Console Application… As expected that should work. And why not? The COM component is still registered, right? :-) Nothing tricky about that. Let's unregister the COM component and then re-run and see what happens. Go to the Command Prompt Change to the folder where the DLL is installed Unregister with: RegSvr32 -u simpleserver.dll To be sure that the COM component no longer works, check it out with the same test you used earlier (ie. o = CREATEOBJECT("SimpleServer.SimpleServer") in your development environment or VBScript etc.). Make sure you run the EXE and you don't re-compile the application or else Visual Studio will complain that it can't find the COM component in the registry while compiling. In fact now that we have our .manifest file you can remove the COM object from the project. When you run run the EXE from Windows Explorer or a command prompt to avoid the recompile. Watch out for embedded Manifest Files Now recompile your .NET project and run it… and it will most likely fail! The problem is that .NET applications by default embeds a manifest file into the compiled EXE application which results in the externally created manifest file being completely ignored. Only one manifest can be applied at a time and the compiled manifest takes precedency. Uh, thanks Visual Studio - not very helpful… Note that if you use another development tool like Visual FoxPro to create your EXE this won't be an issue as long as the tool doesn't automatically add a manifest file. Creating a Visual FoxPro EXE for example will work immediately with the generated manifest file as is. If you are using .NET and Visual Studio you have a couple of options of getting around this: Remove the embedded manifest file Copy the contents of the generated manifest file into a project manifest file and compile that in To remove an embedded manifest in a Visual Studio project: Open the Project Properties (Alt-Enter on project node) Go down to Resources | Manifest and select | Create Application without a Manifest You can now add use the external manifest file and it will actually be respected when the app runs. The other option is to let Visual Studio create the manifest file on disk and then explicitly add the manifest file into the project. Notice on the dialog above I did this for app.exe.manifest and the manifest actually shows up in the list. If I select this file it will be compiled into the EXE and be used in lieu of any external files and that works as well. Remove the simpleserver.dll reference so you can compile your code and run the application. Now it should work without COM registration of the component. Personally I prefer external manifests because they can be modified after the fact - compiled manifests are evil in my mind because they are immutable - once they are there they can't be overriden or changed. So I prefer an external manifest. However, if you are absolutely sure nothing needs to change and you don't want anybody messing with your manifest, you can also embed it. The option to either is there. Watch for Manifest Caching While working trying to get this to work I ran into some problems at first. Specifically when it wasn't working at first (due to the embedded schema) I played with various different manifest layouts in different files etc.. There are a number of different ways to actually represent manifest files including offloading to separate folder (more on that later). A few times I made deliberate errors in the schema file and I found that regardless of what I did once the app failed or worked no amount of changing of the manifest file would make it behave differently. It appears that Windows is caching the manifest data for a given EXE or DLL. It takes a restart or a recompile of either the EXE or the DLL to clear the caching. Recompile your servers in order to see manifest changes unless there's an outright failure of an invalid manifest file. If the app starts the manifest is being read and caches immediately. This can be very confusing especially if you don't know that it's happening. I found myself always recompiling the exe after each run and before making any changes to the manifest file. Don't forget about Runtimes of COM Objects In the example I used above I used a Visual FoxPro COM component. Visual FoxPro is a runtime based environment so if I'm going to distribute an application that uses a FoxPro COM object the runtimes need to be distributed as well. The same is true of classic Visual Basic applications. Assuming that you don't know whether the runtimes are installed on the target machines make sure to install all the additional files in the EXE's directory alongside the COM DLL. In the case of Visual FoxPro the target folder should contain: The EXE App.exe The Manifest file (unless it's compiled in) App.exe.manifest The COM object DLL (simpleserver.dll) Visual FoxPro Runtimes: VFP9t.dll (or VFP9r.dll for non-multithreaded dlls), vfp9rENU.dll, msvcr71.dll All these files should be in the same folder. Debugging Manifest load Errors If you for some reason get your manifest loading wrong there are a couple of useful tools available - SxSTrace and SxSParse. These two tools can be a huge help in debugging manifest loading errors. Put the following into a batch file (SxS_Trace.bat for example): sxstrace Trace -logfile:sxs.bin sxstrace Parse -logfile:sxs.bin -outfile:sxs.txt Then start the batch file before running your EXE. Make sure there's no caching happening as described in the previous section. For example, if I go into the manifest file and explicitly break the CLSID and/or ProgID I get a detailed report on where the EXE is looking for the manifest and what it's reading. Eventually the trace gives me an error like this: INFO: Parsing Manifest File C:\wwapps\Conf\SideBySide\Code\app.EXE. INFO: Manifest Definition Identity is App.exe,processorArchitecture="x86",type="win32",version="1.0.0.0". ERROR: Line 13: The value {AAaf2c2811-0657-4264-a1f5-06d033a969ff} of attribute clsid in element comClass is invalid. ERROR: Activation Context generation failed. End Activation Context Generation. pinpointing nicely where the error lies. Pay special attention to the various attributes - they have to match exactly in the different sections of the manifest file(s). Multiple COM Objects The manifest file that Visual Studio creates is actually quite more complex than is required for basic registrationless COM object invokation. The manifest file can be simplified a lot actually by stripping off various namespaces and removing the type library references altogether. Here's an example of a simplified manifest file that actually includes references to 2 COM servers: xml version="1.0" encoding="utf-8"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / file name="simpleserver.DLL" comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file file name = "sidebysidedeploy.dll" comClass clsid="{EF82B819-7963-4C36-9443-3978CD94F57C}" progid="sidebysidedeploy.SidebysidedeployServer" description="SidebySideDeploy Server" threadingModel="apartment" / file assembly Simple enough right? Routing to separate Manifest Files and Folders In the examples above all files ended up in the application's root folder - all the DLLs, support files and runtimes. Sometimes that's not so desirable and you can actually create separate manifest files. The easiest way to do this is to create a manifest file that 'routes' to another manifest file in a separate folder. Basically you create a new 'assembly identity' via a named id. You can then create a folder and another manifest with the id plus .manifest that points at the actual file. In this example I create: App.exe.manifest A folder called App.deploy A manifest file in App.deploy All DLLs and runtimes in App.deploy Let's start with that master manifest file. This file only holds a reference to another manifest file: App.exe.manifest xml version="1.0" encoding="UTF-8" standalone="yes"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.exe" version="1.0.0.0" processorArchitecture="x86" type="win32" / dependency dependentAssembly assemblyIdentity name="App.deploy" version="1.0.0.0" type="win32" / dependentAssembly dependency assembly Note this file only contains a dependency to App.deploy which is another manifest id. I can then create App.deploy.manifest in the current folder or in an App.deploy folder. In this case I'll create App.deploy and in it copy the DLLs and support runtimes. I then create App.deploy.manifest. App.deploy.manifest xml version="1.0" encoding="UTF-8" standalone="yes"? assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0" assemblyIdentity name="App.deploy" type="win32" version="1.0.0.0" / file name="simpleserver.DLL" comClass clsid="{af2c2811-0657-4264-a1f5-06d033a969ff}" threadingModel="Apartment" progid="simpleserver.SimpleServer" description="simpleserver.SimpleServer" / file file name="sidebysidedeploy.dll" comClass clsid="{EF82B819-7963-4C36-9443-3978CD94F57C}" threadingModel="Apartment" progid="sidebysidedeploy.SidebysidedeployServer" description="SidebySideDeploy Server" / file assembly In this manifest file I then host my COM DLLs and any support runtimes. This is quite useful if you have lots of DLLs you are referencing or if you need to have separate configuration and application files that are associated with the COM object. This way the operation of your main application and the COM objects it interacts with is somewhat separated. You can see the two folders here: Routing Manifests to different Folders In theory registrationless COM should be pretty easy in painless - you've seen the configuration manifest files and it certainly doesn't look very complicated, right? But the devil's in the details. The ActivationContext API (SxS - side by side activation) is very intolerant of small errors in the XML or formatting of the keys, so be really careful when setting up components, especially if you are manually editing these files. If you do run into trouble SxsTrace/SxsParse are a huge help to track down the problems. And remember that if you do have problems that you'll need to recompile your EXEs or DLLs for the SxS APIs to refresh themselves properly. All of this gets even more fun if you want to do registrationless COM inside of IIS :-) But I'll leave that for another blog post…© Rick Strahl, West Wind Technologies, 2005-2011Posted in COM .NET FoxPro Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Simple MSBuild Configuration: Updating Assemblies With A Version Number

- by srkirkland

When distributing a library you often run up against versioning problems, once facet of which is simply determining which version of that library your client is running. Of course, each project in your solution has an AssemblyInfo.cs file which provides, among other things, the ability to set the Assembly name and version number. Unfortunately, setting the assembly version here would require not only changing the version manually for each build (depending on your schedule), but keeping it in sync across all projects. There are many ways to solve this versioning problem, and in this blog post I’m going to try to explain what I think is the easiest and most flexible solution. I will walk you through using MSBuild to create a simple build script, and I’ll even show how to (optionally) integrate with a Team City build server. All of the code from this post can be found at https://github.com/srkirkland/BuildVersion. Create CommonAssemblyInfo.cs The first step is to create a common location for the repeated assembly info that is spread across all of your projects. Create a new solution-level file (I usually create a Build/ folder in the solution root, but anywhere reachable by all your projects will do) called CommonAssemblyInfo.cs. In here you can put any information common to all your assemblies, including the version number. An example CommonAssemblyInfo.cs is as follows: using System.Reflection; using System.Resources; using System.Runtime.InteropServices; [assembly: AssemblyCompany("University of California, Davis")] [assembly: AssemblyProduct("BuildVersionTest")] [assembly: AssemblyCopyright("Scott Kirkland & UC Regents")] [assembly: AssemblyConfiguration("")] [assembly: AssemblyTrademark("")] [assembly: ComVisible(false)] [assembly: AssemblyVersion("1.2.3.4")] //Will be replaced [assembly: NeutralResourcesLanguage("en-US")] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Cleanup AssemblyInfo.cs & Link CommonAssemblyInfo.cs For each of your projects, you’ll want to clean up your assembly info to contain only information that is unique to that assembly – everything else will go in the CommonAssemblyInfo.cs file. For most of my projects, that just means setting the AssemblyTitle, though you may feel AssemblyDescription is warranted. An example AssemblyInfo.cs file is as follows: using System.Reflection; [assembly: AssemblyTitle("BuildVersionTest")] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Next, you need to “link” the CommonAssemblyinfo.cs file into your projects right beside your newly lean AssemblyInfo.cs file. To do this, right click on your project and choose Add | Existing Item from the context menu. Navigate to your CommonAssemblyinfo.cs file but instead of clicking Add, click the little down-arrow next to add and choose “Add as Link.” You should see a little link graphic similar to this: We’ve actually reduced complexity a lot already, because if you build all of your assemblies will have the same common info, including the product name and our static (fake) assembly version. Let’s take this one step further and introduce a build script. Create an MSBuild file What we want from the build script (for now) is basically just to have the common assembly version number changed via a parameter (eventually to be passed in by the build server) and then for the project to build. Also we’d like to have a flexibility to define what build configuration to use (debug, release, etc). In order to find/replace the version number, we are going to use a Regular Expression to find and replace the text within your CommonAssemblyInfo.cs file. There are many other ways to do this using community build task add-ins, but since we want to keep it simple let’s just define the Regular Expression task manually in a new file, Build.tasks (this example taken from the NuGet build.tasks file). <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Go" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <UsingTask TaskName="RegexTransform" TaskFactory="CodeTaskFactory" AssemblyFile="$(MSBuildToolsPath)\Microsoft.Build.Tasks.v4.0.dll"> <ParameterGroup> <Items ParameterType="Microsoft.Build.Framework.ITaskItem[]" /> </ParameterGroup> <Task> <Using Namespace="System.IO" /> <Using Namespace="System.Text.RegularExpressions" /> <Using Namespace="Microsoft.Build.Framework" /> <Code Type="Fragment" Language="cs"> <![CDATA[ foreach(ITaskItem item in Items) { string fileName = item.GetMetadata("FullPath"); string find = item.GetMetadata("Find"); string replaceWith = item.GetMetadata("ReplaceWith"); if(!File.Exists(fileName)) { Log.LogError(null, null, null, null, 0, 0, 0, 0, String.Format("Could not find version file: {0}", fileName), new object[0]); } string content = File.ReadAllText(fileName); File.WriteAllText( fileName, Regex.Replace( content, find, replaceWith ) ); } ]]> </Code> </Task> </UsingTask> </Project> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If you glance at the code, you’ll see it’s really just going a Regex.Replace() on a given file, which is exactly what we need. Now we are ready to write our build file, called (by convention) Build.proj. <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Go" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildProjectDirectory)\Build.tasks" /> <PropertyGroup> <Configuration Condition="'$(Configuration)' == ''">Debug</Configuration> <SolutionRoot>$(MSBuildProjectDirectory)</SolutionRoot> </PropertyGroup> <ItemGroup> <RegexTransform Include="$(SolutionRoot)\CommonAssemblyInfo.cs"> <Find>(?<major>\d+)\.(?<minor>\d+)\.\d+\.(?<revision>\d+)</Find> <ReplaceWith>$(BUILD_NUMBER)</ReplaceWith> </RegexTransform> </ItemGroup> <Target Name="Go" DependsOnTargets="UpdateAssemblyVersion; Build"> </Target> <Target Name="UpdateAssemblyVersion" Condition="'$(BUILD_NUMBER)' != ''"> <RegexTransform Items="@(RegexTransform)" /> </Target> <Target Name="Build"> <MSBuild Projects="$(SolutionRoot)\BuildVersionTest.sln" Targets="Build" /> </Target> </Project> Reviewing this MSBuild file, we see that by default the “Go” target will be called, which in turn depends on “UpdateAssemblyVersion” and then “Build.” We go ahead and import the Bulid.tasks file and then setup some handy properties for setting the build configuration and solution root (in this case, my build files are in the solution root, but we might want to create a Build/ directory later). The rest of the file flows logically, we setup the RegexTransform to match version numbers such as <major>.<minor>.1.<revision> (1.2.3.4 in our example) and replace it with a $(BUILD_NUMBER) parameter which will be supplied externally. The first target, “UpdateAssemblyVersion” just runs the RegexTransform, and the second target, “Build” just runs the default MSBuild on our solution. Testing the MSBuild file locally Now we have a build file which can replace assembly version numbers and build, so let’s setup a quick batch file to be able to build locally. To do this you simply create a file called Build.cmd and have it call MSBuild on your Build.proj file. I’ve added a bit more flexibility so you can specify build configuration and version number, which makes your Build.cmd look as follows: set config=%1 if "%config%" == "" ( set config=debug ) set version=%2 if "%version%" == "" ( set version=2.3.4.5 ) %WINDIR%\Microsoft.NET\Framework\v4.0.30319\msbuild Build.proj /p:Configuration="%config%" /p:build_number="%version%" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now if you click on the Build.cmd file, you will get a default debug build using the version 2.3.4.5. Let’s run it in a command window with the parameters set for a release build version 2.0.1.453. Excellent! We can now run one simple command and govern the build configuration and version number of our entire solution. Each DLL produced will have the same version number, making determining which version of a library you are running very simple and accurate. Configure the build server (TeamCity) Of course you are not really going to want to run a build command manually every time, and typing in incrementing version numbers will also not be ideal. A good solution is to have a computer (or set of computers) act as a build server and build your code for you, providing you a consistent environment, excellent reporting, and much more. One of the most popular Build Servers is JetBrains’ TeamCity, and this last section will show you the few configuration parameters to use when setting up a build using your MSBuild file created earlier. If you are using a different build server, the same principals should apply. First, when setting up the project you want to specify the “Build Number Format,” often given in the form <major>.<minor>.<revision>.<build>. In this case you will set major/minor manually, and optionally revision (or you can use your VCS revision number with %build.vcs.number%), and then build using the {0} wildcard. Thus your build number format might look like this: 2.0.1.{0}. During each build, this value will be created and passed into the $BUILD_NUMBER variable of our Build.proj file, which then uses it to decorate your assemblies with the proper version. After setting up the build number, you must choose MSBuild as the Build Runner, then provide a path to your build file (Build.proj). After specifying your MSBuild Version (equivalent to your .NET Framework Version), you have the option to specify targets (the default being “Go”) and additional MSBuild parameters. The one parameter that is often useful is manually setting the configuration property (/p:Configuration="Release") if you want something other than the default (which is Debug in our example). Your resulting configuration will look something like this: [Under General Settings] [Build Runner Settings] Now every time your build is run, a newly incremented build version number will be generated and passed to MSBuild, which will then version your assemblies and build your solution. A Quick Review Our goal was to version our output assemblies in an automated way, and we accomplished it by performing a few quick steps: Move the common assembly information, including version, into a linked CommonAssemblyInfo.cs file Create a simple MSBuild script to replace the common assembly version number and build your solution Direct your build server to use the created MSBuild script That’s really all there is to it. You can find all of the code from this post at https://github.com/srkirkland/BuildVersion. Enjoy!

Read the article

Web Services for Info Explorer Zones

- by Anthony Shorten

One of the most interesting uses for XAI and Configurable objects is the exposure of a query portal as a Web Service. Let me illustrate this with an example. Say you have an interface that requires a list of data from a number of product tables. In the past you would have to build a java program to do this with SQL then use an application service but it is now possible with just configuration. The first step in the process is to create the SQL you want to use for the interface. It can be any valid static SQL or use host variables for the WHERE clause (we call that filtered). Once you are happy with the SQL (and it performs acceptably) you can incorporate that SQL into a Info-Explorer Zone. You can use any of the explorer zone types but I typically recommend F1-DE-SINGLE as it supports a single SQL statement with multiple filters (up to 15) as well as hidden filters (up to 5). Hidden filters are typically not displayed in the UI for criteria (remember explorer zones can be used on the user Interface as well) but for web services they can be used as normal filters (this means you can use up to 20 filters all up). Once you are happy with the zone, you now need to define it as a Business Service. We have a generic service called FWLZDEXP which allows a explorer zone to be defined as a Business Service. If you open any Business Service based upon FWLZDEXP you will see some examples. The schema is standard and pretty self explanatory in terms of the structure. The schema pattern looks like this: Zone element - maps to the ZONE_CD element and the default value is the zone name you just created. This links the business service to the zone. Filter elements - You name the filters as you like but the mapField is set to Fx_VALUE where x is the filter number corresponding to the filter element in the zone definition. Hidden filter elements - You name the filters as you like but the mapField is set to Hx_VALUE where x is the filter number corresponding to the hidden filter element in the zone definition. results group - this holds the elements of the result set. Each element in your result set has a tagname and is linked to the COL_VALUE mapField and the row element is lists the SEQNO of the column. This corresponds to the column number in the results set in the zone. An example schema is shown below for the F1-USGRACML zone, which returns the access modes for a user group and application service filters. In the example, the userGroup and applicationService elements are the filters and the rows would contain a list of accessModeDescr. This is just a simple example to illustrate the point. There are lots of examples in the product that you can investigate. One recommendation, to save time, is that you copy the schema from one of the examples to save you typing it from scratch. You can simply modify the tags and other elements to suit your needs. Once the Business Service is defined it can simply be defined as a Web Service by registering an XAI Inbound Service using the Business Service definition as a basis. You now have a Web Service based upon a Info Explorer Zone. This is one of my favorite components as it allows interfaces to be simplified. This will be my last blog entry for this year. I hope you all have a great and safe Christmas and an even greater new year. Next year promises to be an exciting year and I look forward to communicating exciting developments we are working on at the moment as they are released.

Read the article

lxc containers hangs after upgrade to 13.10

- by doug123

I have 3 lxc containers. They were all working fine on 12.10 and I upgraded the containers with do-release-upgrade on the containers to 13.04 and 13.10 and that worked great. Then I upgraded the host to 13.04 and then 13.10 and now the 3 containers hang with this: >lxc-start -n as1 -l DEBUG -o $(tty) lxc-start 1383145786.513 INFO lxc_start_ui - using rcfile /var/lib/lxc/as1/config lxc-start 1383145786.513 WARN lxc_log - lxc_log_init called with log already initialized lxc-start 1383145786.513 INFO lxc_apparmor - aa_enabled set to 1 lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/2' (5/6) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/13' (7/8) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/14' (9/10) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/15' (11/12) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/17' (13/14) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/18' (15/16) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/19' (17/18) lxc-start 1383145786.514 DEBUG lxc_conf - allocated pty '/dev/pts/20' (19/20) lxc-start 1383145786.514 INFO lxc_conf - tty's configured lxc-start 1383145786.514 DEBUG lxc_start - sigchild handler set lxc-start 1383145786.514 DEBUG lxc_console - opening /dev/tty for console peer lxc-start 1383145786.514 DEBUG lxc_console - using '/dev/tty' as console lxc-start 1383145786.514 DEBUG lxc_console - 6242 got SIGWINCH fd 25 lxc-start 1383145786.514 DEBUG lxc_console - set winsz dstfd:22 cols:177 rows:53 lxc-start 1383145786.514 INFO lxc_start - 'as1' is initialized lxc-start 1383145786.522 DEBUG lxc_start - Not dropping cap_sys_boot or watching utmp lxc-start 1383145786.524 DEBUG lxc_conf - mac address of host interface 'vethB4L35W' changed to private fe:7c:96:a0:ae:29 lxc-start 1383145786.525 DEBUG lxc_conf - instanciated veth 'vethB4L35W/vethVC61K2', index is '26' lxc-start 1383145786.529 DEBUG lxc_cgroup - cgroup 'memory.limit_in_bytes' set to '20G' lxc-start 1383145786.529 DEBUG lxc_cgroup - cgroup 'cpuset.cpus' set to '12-23' lxc-start 1383145786.529 INFO lxc_cgroup - cgroup has been setup lxc-start 1383145786.555 DEBUG lxc_conf - move 'eth0' to '6249' lxc-start 1383145786.555 INFO lxc_conf - 'as1' hostname has been setup lxc-start 1383145786.575 DEBUG lxc_conf - 'eth0' has been setup lxc-start 1383145786.575 INFO lxc_conf - network has been setup lxc-start 1383145786.575 INFO lxc_conf - looking at .44 42 252:0 / / rw,relatime - ext4 /dev/mapper/limitorderbook1-root rw,errors=remount-ro,data=ordered . lxc-start 1383145786.575 INFO lxc_conf - now p is . /. lxc-start 1383145786.575 INFO lxc_conf - looking at .52 44 0:5 / /dev rw,relatime - devtmpfs udev rw,size=32961632k,nr_inodes=8240408,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /dev. lxc-start 1383145786.575 INFO lxc_conf - looking at .61 52 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,mode=600,ptmxmode=000 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /dev/pts. lxc-start 1383145786.575 INFO lxc_conf - looking at .68 44 0:15 / /run rw,nosuid,noexec,relatime - tmpfs tmpfs rw,size=6594456k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run. lxc-start 1383145786.575 INFO lxc_conf - looking at .69 68 0:18 / /run/lock rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=5120k . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/lock. lxc-start 1383145786.575 INFO lxc_conf - looking at .72 68 0:19 / /run/shm rw,nosuid,nodev,relatime - tmpfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/shm. lxc-start 1383145786.575 INFO lxc_conf - looking at .73 68 0:21 / /run/user rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=102400k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /run/user. lxc-start 1383145786.575 INFO lxc_conf - looking at .76 44 0:14 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys. lxc-start 1383145786.575 INFO lxc_conf - looking at .77 76 0:16 / /sys/fs/cgroup rw,relatime - tmpfs none rw,size=4k,mode=755 . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup. lxc-start 1383145786.575 INFO lxc_conf - looking at .78 77 0:20 / /sys/fs/cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset,clone_children . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuset. lxc-start 1383145786.575 INFO lxc_conf - looking at .79 77 0:23 / /sys/fs/cgroup/cpu rw,relatime - cgroup cgroup rw,cpu . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpu. lxc-start 1383145786.575 INFO lxc_conf - looking at .80 77 0:24 / /sys/fs/cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuacct. lxc-start 1383145786.575 INFO lxc_conf - looking at .81 77 0:25 / /sys/fs/cgroup/memory rw,relatime - cgroup cgroup rw,memory . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/memory. lxc-start 1383145786.575 INFO lxc_conf - looking at .82 77 0:26 / /sys/fs/cgroup/devices rw,relatime - cgroup cgroup rw,devices . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/devices. lxc-start 1383145786.575 INFO lxc_conf - looking at .83 77 0:27 / /sys/fs/cgroup/freezer rw,relatime - cgroup cgroup rw,freezer . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/freezer. lxc-start 1383145786.575 INFO lxc_conf - looking at .84 77 0:28 / /sys/fs/cgroup/blkio rw,relatime - cgroup cgroup rw,blkio . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/blkio. lxc-start 1383145786.575 INFO lxc_conf - looking at .85 77 0:29 / /sys/fs/cgroup/perf_event rw,relatime - cgroup cgroup rw,perf_event . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/perf_event. lxc-start 1383145786.575 INFO lxc_conf - looking at .94 77 0:30 / /sys/fs/cgroup/hugetlb rw,relatime - cgroup cgroup rw,hugetlb . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/hugetlb. lxc-start 1383145786.575 INFO lxc_conf - looking at .95 77 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime - cgroup systemd rw,name=systemd . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/cgroup/systemd. lxc-start 1383145786.575 INFO lxc_conf - looking at .96 76 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/fuse/connections. lxc-start 1383145786.575 INFO lxc_conf - looking at .98 76 0:6 / /sys/kernel/debug rw,relatime - debugfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/kernel/debug. lxc-start 1383145786.575 INFO lxc_conf - looking at .101 76 0:10 / /sys/kernel/security rw,relatime - securityfs none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/kernel/security. lxc-start 1383145786.575 INFO lxc_conf - looking at .102 76 0:22 / /sys/fs/pstore rw,relatime - pstore none rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /sys/fs/pstore. lxc-start 1383145786.575 INFO lxc_conf - looking at .103 44 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw . lxc-start 1383145786.575 INFO lxc_conf - now p is . /proc. lxc-start 1383145786.575 INFO lxc_conf - looking at .104 44 9:2 / /data rw,relatime - ext4 /dev/md2 rw,errors=remount-ro,data=ordered . lxc-start 1383145786.575 INFO lxc_conf - now p is . /data. lxc-start 1383145786.575 INFO lxc_conf - looking at .105 44 8:1 / /boot rw,relatime - ext2 /dev/sda1 rw,errors=continue . lxc-start 1383145786.575 INFO lxc_conf - now p is . /boot. lxc-start 1383145786.576 DEBUG lxc_conf - mounted '/data/srv/lxc/as1' on '/usr/lib/x86_64-linux-gnu/lxc' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//dev/pts', type 'devpts' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//proc', type 'proc' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//sys', type 'sysfs' lxc-start 1383145786.576 DEBUG lxc_conf - mounted 'none' on '/usr/lib/x86_64-linux-gnu/lxc//run', type 'tmpfs' lxc-start 1383145786.576 INFO lxc_conf - mount points have been setup lxc-start 1383145786.577 INFO lxc_conf - console has been setup lxc-start 1383145786.577 INFO lxc_conf - 8 tty(s) has been setup lxc-start 1383145786.577 INFO lxc_conf - rootfs path is ./data/srv/lxc/as1., mount is ./usr/lib/x86_64-linux-gnu/lxc. lxc-start 1383145786.577 INFO lxc_apparmor - I am 1, /proc/self points to 1 lxc-start 1383145786.577 DEBUG lxc_conf - created '/usr/lib/x86_64-linux-gnu/lxc/lxc_putold' directory lxc-start 1383145786.577 DEBUG lxc_conf - mountpoint for old rootfs is '/usr/lib/x86_64-linux-gnu/lxc/lxc_putold' lxc-start 1383145786.577 DEBUG lxc_conf - pivot_root syscall to '/usr/lib/x86_64-linux-gnu/lxc' successful lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/dev/pts' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/lock' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/shm' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run/user' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpuset' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpu' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/cpuacct' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/memory' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/devices' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/freezer' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/blkio' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/perf_event' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/hugetlb' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup/systemd' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/fuse/connections' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/kernel/debug' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/kernel/security' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/pstore' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/proc' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/data' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/boot' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/dev' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/run' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys/fs/cgroup' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold/sys' lxc-start 1383145786.577 DEBUG lxc_conf - umounted '/lxc_putold' lxc-start 1383145786.577 INFO lxc_conf - created new pts instance lxc-start 1383145786.578 DEBUG lxc_conf - drop capability 'sys_boot' (22) lxc-start 1383145786.578 DEBUG lxc_conf - capabilities have been setup lxc-start 1383145786.578 NOTICE lxc_conf - 'as1' is setup. lxc-start 1383145786.578 DEBUG lxc_cgroup - cgroup 'memory.limit_in_bytes' set to '20G' lxc-start 1383145786.578 DEBUG lxc_cgroup - cgroup 'cpuset.cpus' set to '12-23' lxc-start 1383145786.578 INFO lxc_cgroup - cgroup has been setup lxc-start 1383145786.578 INFO lxc_apparmor - setting up apparmor lxc-start 1383145786.578 INFO lxc_apparmor - changed apparmor profile to lxc-container-default lxc-start 1383145786.578 NOTICE lxc_start - exec'ing '/sbin/init' lxc-start 1383145786.578 INFO lxc_conf - looking at .15 20 0:14 / /sys rw,nosuid,nodev,noexec,relatime - sysfs sysfs rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys. lxc-start 1383145786.578 INFO lxc_conf - looking at .16 20 0:3 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /proc. lxc-start 1383145786.578 INFO lxc_conf - looking at .17 20 0:5 / /dev rw,relatime - devtmpfs udev rw,size=32961632k,nr_inodes=8240408,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /dev. lxc-start 1383145786.578 INFO lxc_conf - looking at .18 17 0:11 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,mode=600,ptmxmode=000 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /dev/pts. lxc-start 1383145786.578 INFO lxc_conf - looking at .19 20 0:15 / /run rw,nosuid,noexec,relatime - tmpfs tmpfs rw,size=6594456k,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /run. lxc-start 1383145786.578 INFO lxc_conf - looking at .20 1 252:0 / / rw,relatime - ext4 /dev/mapper/limitorderbook1-root rw,errors=remount-ro,data=ordered . lxc-start 1383145786.578 INFO lxc_conf - now p is . /. lxc-start 1383145786.578 INFO lxc_conf - looking at .22 15 0:16 / /sys/fs/cgroup rw,relatime - tmpfs none rw,size=4k,mode=755 . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys/fs/cgroup. lxc-start 1383145786.578 INFO lxc_conf - looking at .23 15 0:17 / /sys/fs/fuse/connections rw,relatime - fusectl none rw . lxc-start 1383145786.578 INFO lxc_conf - now p is . /sys/fs/fuse/connections. lxc-start 1383145786.578 INFO lxc_conf - looking at .24 15 0:6 / /sys/kernel/debug rw,relatime - debugfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/kernel/debug. lxc-start 1383145786.579 INFO lxc_conf - looking at .25 15 0:10 / /sys/kernel/security rw,relatime - securityfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/kernel/security. lxc-start 1383145786.579 INFO lxc_conf - looking at .26 19 0:18 / /run/lock rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=5120k . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/lock. lxc-start 1383145786.579 INFO lxc_conf - looking at .27 19 0:19 / /run/shm rw,nosuid,nodev,relatime - tmpfs none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/shm. lxc-start 1383145786.579 INFO lxc_conf - looking at .28 22 0:20 / /sys/fs/cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset,clone_children . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuset. lxc-start 1383145786.579 INFO lxc_conf - looking at .29 19 0:21 / /run/user rw,nosuid,nodev,noexec,relatime - tmpfs none rw,size=102400k,mode=755 . lxc-start 1383145786.579 INFO lxc_conf - now p is . /run/user. lxc-start 1383145786.579 INFO lxc_conf - looking at .30 15 0:22 / /sys/fs/pstore rw,relatime - pstore none rw . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/pstore. lxc-start 1383145786.579 INFO lxc_conf - looking at .31 22 0:23 / /sys/fs/cgroup/cpu rw,relatime - cgroup cgroup rw,cpu . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpu. lxc-start 1383145786.579 INFO lxc_conf - looking at .32 22 0:24 / /sys/fs/cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/cpuacct. lxc-start 1383145786.579 INFO lxc_conf - looking at .33 22 0:25 / /sys/fs/cgroup/memory rw,relatime - cgroup cgroup rw,memory . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/memory. lxc-start 1383145786.579 INFO lxc_conf - looking at .34 22 0:26 / /sys/fs/cgroup/devices rw,relatime - cgroup cgroup rw,devices . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/devices. lxc-start 1383145786.579 INFO lxc_conf - looking at .35 22 0:27 / /sys/fs/cgroup/freezer rw,relatime - cgroup cgroup rw,freezer . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/freezer. lxc-start 1383145786.579 INFO lxc_conf - looking at .36 22 0:28 / /sys/fs/cgroup/blkio rw,relatime - cgroup cgroup rw,blkio . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/blkio. lxc-start 1383145786.579 INFO lxc_conf - looking at .37 22 0:29 / /sys/fs/cgroup/perf_event rw,relatime - cgroup cgroup rw,perf_event . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/perf_event. lxc-start 1383145786.579 INFO lxc_conf - looking at .38 22 0:30 / /sys/fs/cgroup/hugetlb rw,relatime - cgroup cgroup rw,hugetlb . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/hugetlb. lxc-start 1383145786.579 INFO lxc_conf - looking at .39 20 9:2 / /data rw,relatime - ext4 /dev/md2 rw,errors=remount-ro,data=ordered . lxc-start 1383145786.579 INFO lxc_conf - now p is . /data. lxc-start 1383145786.579 INFO lxc_conf - looking at .40 20 8:1 / /boot rw,relatime - ext2 /dev/sda1 rw,errors=continue . lxc-start 1383145786.579 INFO lxc_conf - now p is . /boot. lxc-start 1383145786.579 INFO lxc_conf - looking at .41 22 0:31 / /sys/fs/cgroup/systemd rw,nosuid,nodev,noexec,relatime - cgroup systemd rw,name=systemd . lxc-start 1383145786.579 INFO lxc_conf - now p is . /sys/fs/cgroup/systemd. lxc-start 1383145786.579 NOTICE lxc_start - '/sbin/init' started with pid '6249' lxc-start 1383145786.579 WARN lxc_start - invalid pid for SIGCHLD <4>init: ureadahead main process (7) terminated with status 5 <4>init: console-font main process (94) terminated with status 1 And it will just sit there like that for hours at least. The container becomes pingable but I can't ssh and if I try lxc-console -n as1 I get a blank screen. If I do lxc-stop -n as1 or ^C in the window where it has hung I get: ^CTERM environment variable not set. <4>init: plymouth-upstart-bridge main process (192) terminated with status 1 <4>init: hwclock-save main process (187) terminated with status 70 * Asking all remaining processes to terminate... ...done. * All processes ended within 1 seconds... ...done. * Deactivating swap... ...fail! mount: cannot mount block device /dev/md2 read-only * Will now restart But after 20 minutes it hasn't restarted. Any ideas why these containers are hanging?

Read the article

Change Desktop Resolution With a Keyboard Shortcut

- by Matthew Guay

Do you find yourself changing your monitor resolution several times a day? If so, you might like this handy way to set a keyboard shortcut for your most-used resolutions. Most users rarely have to change their screen resolution often, as LCD monitors usually only look best at their native resolution. But netbooks present a unique situation, as their native resolution is usually only 1024×600. Some newer netbooks offer higher resolutions which may not looks as crisp as the native resolution but can be handy for using a program that expects a higher resolution. This is the perfect situation for a keyboard shortcut to help you change the resolution without having to hassle with dialogs and menus each time, and HRC – HotKey Resolution Changer makes it easy to do. Create Keyboard Shortcuts Download the HRC – HotKey Resolution Changer (link below), unzip, and then run HRC.exe in the folder. This will start a tray icon, and will not automatically open the HRC window. You don’t have to install HRC. Double-click the tray icon to open it. Note: Windows 7 automatically hides new tray icons, so if you can’t see it, click the arrow to see the hidden tray icons. By default, HRC will show two entries with your default resolutions, color depth, and refresh rate. Add a keyboard shortcut by clicking the Change button over the resolution. Press the keyboard shortcut you want to press to switch to that resolution; we entered Ctrl+Alt+1 for our default resolution. Make sure not to use a keyboard shortcut you use in another application, as this will override it. Click Set when you’ve entered the hotkey(s) you want. Now, on the second entry, select the resolution you want for your alternate resolution. The drop-down list will only show your monitor’s supported resolutions, so you don’t have to worry about choosing an incorrect resolution. You can also set a different color depth or refresh rate for this resolution. Now add a keyboard shortcut for this resolution as well. You can set keyboard shortcuts for up to 9 different resolutions with HRC. Click the Select number of HotKeys button on the left, and choose the number of resolutions you want to set. Here we have unique keyboard shortcuts for our three most-used resolutions on our netbook. HRC must be kept running to use the keyboard shortcuts, so click the Minimize to tray icon which is the second icon to the right. This will keep it running in the tray. If you want to be able to change your resolution anytime, you’ll want HRC to automatically start with Windows. Create a shortcut to HRC, and paste it into your Windows startup folder. You can easily open this folder by entering the following in the Run command or in the address bar in Explorer: %appdata%\Microsoft\Windows\Start Menu\Programs\Startup Conclusion HRC- HotKey Resolution Changer gives you a great way to quickly change your screen resolution with a keyboard shortcut. Whether or not you love keyboard shortcuts, this is still a much easier way to switch between your most commonly used resolutions. Download HRC – HotKey Resolution Changer Similar Articles Productive Geek Tips Create a Keyboard Shortcut to Access Hidden Desktop Icons and FilesGet Mac’s Hide Others (cmd+opt+H) Keyboard Shortcut for WindowsHide Desktop Icon Text on Windows 7 or VistaShow Keyboard Shortcut Access Keys in Windows VistaKeyboard Ninja: 21 Keyboard Shortcut Articles TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative

Read the article

The Windows Store... why did I sign up with this mess again?

- by FransBouma

Yesterday, Microsoft revealed that the Windows Store is now open to all developers in a wide range of countries and locations. For the people who think "wtf is the 'Windows Store'?", it's the central place where Windows 8 users will be able to find, download and purchase applications (or as we now have to say to not look like a computer illiterate: <accent style="Kentucky">aaaaappss</accent>) for Windows 8. As this is the store which is integrated into Windows 8, it's an interesting place for ISVs, as potential customers might very well look there first. This of course isn't true for all kinds of software, and developer tools in general aren't the kind of applications most users will download from the Windows store, but a presence there can't hurt. Now, this Windows Store hosts two kinds of applications: 'Metro-style' applications and 'Desktop' applications. The 'Metro-style' applications are applications created for the new 'Metro' UI which is present on Windows 8 desktop and Windows RT (the single color/big font fingerpaint-oriented UI). 'Desktop' applications are the applications we all run and use on Windows today. Our software are desktop applications. The Windows Store hosts all Metro-style applications locally in the store and handles the payment for these applications. This means you upload your application (sorry, 'app') to the store, jump through a lot of hoops, Microsoft verifies that your application is not violating a tremendous long list of rules and after everything is OK, it's published and hopefully you get customers and thus earn money. Money which Microsoft will pay you on a regular basis after customers buy your application. Desktop applications are not following this path however. Desktop applications aren't hosted by the Windows Store. Instead, the Windows Store more or less hosts a page with the application's information and where to get the goods. I.o.w.: it's nothing more than a product's Facebook page. Microsoft will simply redirect a visitor of the Windows Store to your website and the visitor will then use your site's system to purchase and download the application. This last bit of information is very important. So, this morning I started with fresh energy to register our company 'Solutions Design bv' at the Windows Store and our two applications, LLBLGen Pro and ORM Profiler. First I went to the Windows Store dashboard page. If you don't have an account, you have to log in or sign up if you don't have a live account. I signed in with my live account. After that, it greeted me with a page where I had to fill in a code which was mailed to me. My local mail server polls every several minutes for email so I had to kick it to get it immediately. I grabbed the code from the email and I was presented with a multi-step process to register myself as a company or as an individual. In red I was warned that this choice was permanent and not changeable. I chuckled: Microsoft apparently stores its data on paper, not in digital form. I chose 'company' and was presented with a lengthy form to fill out. On the form there were two strange remarks: Per company there can just be 1 (one, uno, not zero, not two or more) registered developer, and only that developer is able to upload stuff to the store. I have no idea how this works with large companies, oh the overhead nightmares... "Sorry, but John, our registered developer with the Windows Store is on holiday for 3 months, backpacking through Australia, no, he's not reachable at this point. M'yeah, sorry bud. Hey, did you fill in those TPS reports yesterday?" A separate Approver has to be specified, which has to be a different person than the registered developer. Apparently to Microsoft a company with just 1 person is not a company. Luckily we're with two people! *pfew*, dodged that one, otherwise I would be stuck forever: the choice I already made was not reversible! After I had filled out the form and it was all well and good and accepted by the Microsoft lackey who had to write it all down in some paper notebook ("Hey, be warned! It's a permanent choice! Written down in ink, can't be changed!"), I was presented with the question how I wanted to pay for all this. "Pay for what?" I wondered. Must be the paper they were scribbling the information on, I concluded. After all, there's a financial crisis going on! How could I forget! Silly me. "Ok fair enough". The price was 75 Euros, not the end of the world. I could only pay by credit card, so it was accepted quickly. Or so I thought. You see, Microsoft has a different idea about CC payments. In the normal world, you type in your CC number, some date, a name and a security code and that's it. But Microsoft wants to verify this even more. They want to make a verification purchase of a very small amount and are doing that with a special code in the description. You then have to type in that code in a special form in the Windows Store dashboard and after that you're verified. Of course they'll refund the small amount they pull from your card. Sounds simple, right? Well... no. The problem starts with the fact that I can't see the CC activity on some website: I have a bank issued CC card. I get the CC activity once a month on a piece of paper sent to me. The bank's online website doesn't show them. So it's possible I have to wait for this code till October 12th. One month. "So what, I'm not going to use it anyway, Desktop applications don't use the payment system", I thought. "Haha, you're so naive, dear developer!" Microsoft won't allow you to publish any applications till this verification is done. So no application publishing for a month. Wouldn't it be nice if things were, you know, digital, so things got done instantly? But of course, that lackey who scribbled everything in the Big Windows Store Registration Book isn't that quick. Can't blame him though. He's just doing his job. Now, after the payment was done, I was presented with a page which tells me Microsoft is going to use a third party company called 'Symantec', which will verify my identity again. The page explains to me that this could be done through email or phone and that they'll contact the Approver to verify my identity. "Phone?", I thought... that's a little drastic for a developer account to publish a single page of information about an external hosted software product, isn't it? On Facebook I just added a page, done. And paying you, Microsoft, took less information: you were happy to take my money before my identity was even 'verified' by this 3rd party's minions! "Double standards!", I roared. No-one cared. But it's the thought of getting it off your chest, you know. Luckily for me, everyone at Symantec was asleep when I was registering so they went for the fallback option in case phone calls were not possible: my Approver received an email. Imagine you have to explain the idiot web of security theater I was caught in to someone else who then has to reply a random person over the internet that I indeed was who I said I was. As she's a true sweetheart, she gave me the benefit of the doubt and assured that for now, I was who I said I was. Remember, this is for a desktop application, which is only a link to a website, some pictures and a piece of text. No file hosting, no payment processing, nothing, just a single page. Yeah, I also thought I was crazy. But we're not at the end of this quest yet. I clicked around in the confusing menus of the Windows Store dashboard and found the 'Desktop' section. I get a helpful screen with a warning in red that it can't find any certified 'apps'. True, I'm just getting started, buddy. I see a link: "Check the Windows apps you submitted for certification". Well, I haven't submitted anything, but let's see where it brings me. Oh the thrill of adventure! I click the link and I end up on this site: the hardware/desktop dashboard account registration. "Erm... but I just registered...", I mumbled to no-one in particular. Apparently for desktop registration / verification I have to register again, it tells me. But not only that, the desktop application has to be signed with a certificate. And not just some random el-cheapo certificate you can get at any mall's discount store. No, this certificate is special. It's precious. This certificate, the 'Microsoft Authenticode' Digital Certificate, is the only certificate that's acceptable, and jolly, it can be purchased from VeriSign for the price of only ... $99.-, but be quick, because this is a limited time offer! After that it's, I kid you not, $499.-. 500 dollars for a certificate to sign an executable. But, I do feel special, I got a special price. Only for me! I'm glowing. Not for long though. Here I started to wonder, what the benefit of it all was. I now again had to pay money for a shiny certificate which will add 'Solutions Design bv' to our installer as the publisher instead of 'unknown', while our customers download the file from our website. Not only that, but this was all about a Desktop application, which wasn't hosted by Microsoft. They only link to it. And make no mistake. These prices aren't single payments. Every year these have to be renewed. Like a membership of an exclusive club: you're special and privileged, but only if you cough up the dough. To give you an example how silly this all is: I added LLBLGen Pro and ORM Profiler to the Visual Studio Gallery some time ago. It's the same thing: it's a central place where one can find software which adds to / extends / works with Visual Studio. I could simply create the pages, add the information and they show up inside Visual Studio. No files are hosted at Microsoft, they're downloaded from our website. Exactly the same system. As I have to wait for the CC transcripts to arrive anyway, I can't proceed with publishing in this new shiny store. After the verification is complete I have to wait for verification of my software by Microsoft. Even Desktop applications need to be verified using a long list of rules which are mainly focused on Metro-style applications. Even while they're not hosted by Microsoft. I wonder what they'll find. "Your application wasn't approved. It violates rule 14 X sub D: it provides more value than our own competing framework". While I was writing this post, I tried to check something in the Windows Store Dashboard, to see whether I remembered it correctly. I was presented again with the question, after logging in with my live account, to enter the code that was just mailed to me. Not the previous code, a brand new one. Again I had to kick my mail server to pull the email to proceed. This was it. This 'experience' is so beyond miserable, I'm afraid I have to say goodbye for now to the 'Windows Store'. It's simply not worth my time. Now, about live accounts. You might know this: live accounts are tied to everything you do with Microsoft. So if you have an MSDN subscription, e.g. the one which costs over $5000.-, it's tied to this same live account. But the fun thing is, you can login with your live account to the MSDN subscriptions with just the account id and password. No additional code is mailed to you. While it gives you access to all Microsoft software available, including your licenses. Why the draconian security theater with this Windows Store, while all I want is to publish some desktop applications while on other Microsoft sites it's OK to simply sign in with your live account: no codes needed, no verification and no certificates? Microsoft, one thing you need with this store and that's: apps. Apps, apps, apps, apps, aaaaaaaaapps. Sorry, my bad, got carried away. I just can't stand the word 'app'. This store's shelves have to be filled to the brim with goods. But instead of being welcomed into the store with open arms, I have to fight an uphill battle with an endless list of rules and bullshit to earn the privilege to publish in this shiny store. As if I have to be thrilled to be one of the exclusive club called 'Windows Store Publishers'. As if Microsoft doesn't want it to succeed. Craig Stuntz sent me a link to an old blog post of his regarding code signing and uploading to Microsoft's old mobile store from back in the WinMo5 days: http://blogs.teamb.com/craigstuntz/2006/10/11/28357/. Good read and good background info about how little things changed over the years. I hope this helps Microsoft make things more clearer and smoother and also helps ISVs with their decision whether to go with the Windows Store scheme or ignore it. For now, I don't see the advantage of publishing there, especially not with the nonsense rules Microsoft cooked up. Perhaps it changes in the future, who knows.

Read the article

Create excel files with GemBox.Spreadsheet .NET component

- by hajan

Generating excel files from .NET code is not always a very easy task, especially if you need to make some formatting or you want to do something very specific that requires extra coding. I’ve recently tried the GemBox Spreadsheet and I would like to share my experience with you. First of all, you can install GemBox Spreadsheet library from VS.NET 2010 Extension manager by searching in the gallery: Go in the Online Gallery tab (as in the picture bellow) and write GemBox in the Search box on top-right of the Extension Manager, so you will get the following result: Click Download on GemBox.Spreadsheet and you will be directed to product website. Click on the marked link then you will get to the following page where you have the component download link Once you download it, install the MSI file. Open the installation folder and find the Bin folder. There you have GemBox.Spreadsheet.dll in three folders each for different .NET Framework version. Now, lets move to Visual Studio.NET. 1. Create sample ASP.NET Web Application and give it a name. 2. Reference The GemBox.Spreadsheet.dll file in your project So you don’t need to search for the dll file in your disk but you can simply find it in the .NET tab in ‘Add Reference’ window and you have all three versions. I chose the version for 4.0.30319 runtime. Next, I will retrieve data from my Pubs database. I’m using Entity Framework. Here is the code (read the comments in it): //get data from pubs database, tables: authors, titleauthor, titles pubsEntities context = new pubsEntities(); var authorTitles = (from a in context.authors join tl in context.titleauthor on a.au_id equals tl.au_id join t in context.titles on tl.title_id equals t.title_id select new AuthorTitles { Name = a.au_fname, Surname = a.au_lname, Title = t.title, Price = t.price, PubDate = t.pubdate }).ToList(); //using GemBox library now ExcelFile myExcelFile = new ExcelFile(); ExcelWorksheet excWsheet = myExcelFile.Worksheets.Add("Hajan's worksheet"); excWsheet.Cells[0, 0].Value = "Pubs database Authors and Titles"; excWsheet.Cells[0, 0].Style.Borders.SetBorders(MultipleBorders.Bottom,System.Drawing.Color.Red,LineStyle.Thin); excWsheet.Cells[0, 1].Style.Borders.SetBorders(MultipleBorders.Bottom, System.Drawing.Color.Red, LineStyle.Thin); int numberOfColumns = 5; //the number of properties in the authorTitles we have //for each column for (int c = 0; c < numberOfColumns; c++) { excWsheet.Columns[c].Width = 25 * 256; //set the width to each column } //header row cells excWsheet.Rows[2].Cells[0].Value = "Name"; excWsheet.Rows[2].Cells[1].Value = "Surname"; excWsheet.Rows[2].Cells[2].Value = "Title"; excWsheet.Rows[2].Cells[3].Value = "Price"; excWsheet.Rows[2].Cells[4].Value = "PubDate"; //bind authorTitles in the excel worksheet int currentRow = 3; foreach (AuthorTitles at in authorTitles) { excWsheet.Rows[currentRow].Cells[0].Value = at.Name; excWsheet.Rows[currentRow].Cells[1].Value = at.Surname; excWsheet.Rows[currentRow].Cells[2].Value = at.Title; excWsheet.Rows[currentRow].Cells[3].Value = at.Price; excWsheet.Rows[currentRow].Cells[4].Value = at.PubDate; currentRow++; } //stylizing my excel file look CellStyle style = new CellStyle(myExcelFile); style.HorizontalAlignment = HorizontalAlignmentStyle.Left; style.VerticalAlignment = VerticalAlignmentStyle.Center; style.Font.Color = System.Drawing.Color.DarkRed; style.WrapText = true; style.Borders.SetBorders(MultipleBorders.Top | MultipleBorders.Left | MultipleBorders.Right | MultipleBorders.Bottom, System.Drawing.Color.Black, LineStyle.Thin); //pay attention on this, we set created style on the given (firstRow, firstColumn, lastRow, lastColumn) //in my example: //firstRow = 2; firstColumn = 0; lastRow = authorTitles.Count+1; lastColumn = numberOfColumns-1; variable excWsheet.Cells.GetSubrangeAbsolute(3, 0, authorTitles.Count+2, numberOfColumns-1).Style = style; //save my excel file myExcelFile.SaveXls(Server.MapPath(".") + @"/myFile.xls"); The AuthorTitles class: public class AuthorTitles { public string Name { get; set; } public string Surname { get; set; } public string Title { get; set; } public decimal? Price { get; set; } public DateTime PubDate { get; set; } } The excel file will be generated in the root of your ASP.NET Web Application. The result is: There is a lot more you can do with this library. A set of good examples you have in the GemBox.Spreadsheet Samples Explorer application which comes together with the installation and you can find it by default in Start –> All Programs –> GemBox Software –> GemBox.Spreadsheet Samples Explorer. Hope this was useful for you. Best Regards, Hajan

Read the article

Time to stop using “Execute Package Task”– a way to execute package in SSIS catalog taking advantage of the new project deployment model ,and the logging and reporting feature

- by Kevin Shyr

I set out to find a way to dynamically call package in SSIS 2012. The following are 2 excellent blogs I found; I used them heavily. The code below has some addition to parameter types and message types, but was made essentially derived entirely from the blogs. http://sqlblog.com/blogs/jamie_thomson/archive/2011/07/16/ssis-logging-in-denali.aspx http://www.ssistalk.com/2012/07/24/quick-tip-run-ssis-2012-packages-synchronously-and-other-execution-options/ The code: Every package will be called by a PackageController package. The packageController is initialized with some information on which package to run and what information to pass in. The following is the stored procedure called from the “Execute SQL Task”. Here is the highlight of the stored procedure It takes in packageName, project name, and folder name (folder in SSIS project deployment to SSIS catalog) The stored procedure sets the package variables of the upcoming package execution Execute package in SSIS Catalog Get the status of the execution. Also, if exists, get the error message’s message_id and store them in the management database. Return value to “Execute SQL Task” to manage failure properly CREATE PROCEDURE [AUDIT].[LaunchPackageExecutionInSSISCatalog] @PackageName NVARCHAR(255) , @ProjectFolder NVARCHAR(255) , @ProjectName NVARCHAR(255) , @AuditKey INT , @DisableNotification BIT , @PackageExecutionLogID INT AS BEGIN TRY DECLARE @execution_id BIGINT = 0; -- Create a package execution EXEC [SSISDB].[catalog].[create_execution] @package_name=@PackageName, @execution_id=@execution_id OUTPUT, @folder_name=@ProjectFolder, @project_name=@ProjectName, @use32bitruntime=False; UPDATE [AUDIT].[PackageInstanceExecutionLog] WITH(ROWLOCK) SET [SSISCatalogExecutionID] = @execution_id WHERE [PackageInstanceExecutionLogID] = @PackageExecutionLogID -- this is to set the execution synchronized so that I can check the result in the end EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'SYNCHRONIZED', @parameter_value=1; -- true /******************************************************** ******************************************************** Section: setting parameters Source table: SSISDB.internal.object_parameters object_type list: 20: project level variables 30: package level variables 50: execution parameter ******************************************************** ********************************************************/ EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_AuditKey', @parameter_value=@AuditKey; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_DisableNotification', @parameter_value=@DisableNotification; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=30, @parameter_name=N'FromParent_PackageInstanceExecutionID', @parameter_value=@PackageExecutionLogID; -- true /******************************************************** ******************************************************** Section: setting variables END ******************************************************** ********************************************************/ /* This section is carried over from example code I don't see a reason to change them yet */ -- Set our package parameters EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_ON_EVENT', @parameter_value=1; -- true EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_EVENT_CODE', @parameter_value=N'0x80040E4D;0x80004005'; EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'LOGGING_LEVEL', @parameter_value= 1; -- Basic EXEC [SSISDB].[catalog].[set_execution_parameter_value] @execution_id, @object_type=50, @parameter_name=N'DUMP_ON_ERROR', @parameter_value=1; -- true /******************************************************** ******************************************************** Section: EXECUTING ******************************************************** ********************************************************/ EXEC [SSISDB].[catalog].[start_execution] @execution_id; /******************************************************** ******************************************************** Section: EXECUTING END ******************************************************** ********************************************************/ /******************************************************** ******************************************************** Section: checking execution result Source table: [SSISDB].[catalog].[executions] status: 1: created 2: running 3: cancelled 4: failed 5: pending 6: ended unexpectedly 7: succeeded 8: stopping 9: completed ******************************************************** ********************************************************/ if EXISTS(SELECT TOP 1 1 FROM [SSISDB].[catalog].[executions] WITH(NOLOCK) WHERE [execution_id] = @execution_id AND [status] NOT IN (2, 7, 9)) BEGIN /******************************************************** ******************************************************** Section: logging error messages Source table: [SSISDB].[internal].[operation_messages] message type: 10: OnPreValidate 20: OnPostValidate 30: OnPreExecute 40: OnPostExecute 60: OnProgress 70: OnInformation 90: Diagnostic 110: OnWarning 120: OnError 130: Failure 140: DiagnosticEx 200: Custom events 400: OnPipeline message source type: 10: Messages logged by the entry APIs (e.g. T-SQL, CLR Stored procedures) 20: Messages logged by the external process used to run package (ISServerExec) 30: Messages logged by the package-level objects 40: Messages logged by tasks in the control flow 50: Messages logged by containers (For, ForEach, Sequence) in the control flow 60: Messages logged by the Data Flow Task ******************************************************** ********************************************************/ INSERT INTO AUDIT.PackageInstanceExecutionOperationErrorLink SELECT @PackageExecutionLogID ,[operation_message_id] FROM [SSISDB].[internal].[operation_messages] WITH(NOLOCK) WHERE operation_id = @execution_id AND message_type IN (120, 130) EXEC [AUDIT].[FailPackageInstanceExecution] @PackageExecutionLogID, 'SSISDB Internal operation_messages found' GOTO ReturnTrueAsErrorFlag /******************************************************** ******************************************************** Section: checking messages END ******************************************************** ********************************************************/ /* This part is not really working, so now using rowcount to pass status --DECLARE @PackageErrorMessage NVARCHAR(4000) --SET @PackageErrorMessage = @PackageName + 'failed with executionID: ' + CONVERT(VARCHAR(20), @execution_id) --RAISERROR (@PackageErrorMessage -- Message text. -- , 18 -- Severity, -- , 1 -- State, -- , N'check table AUDIT.PackageInstanceExecutionErrorMessages' -- First argument. -- ); */ END ELSE BEGIN GOTO ReturnFalseAsErrorFlagToSignalSuccess END /******************************************************** ******************************************************** Section: checking execution result END ******************************************************** ********************************************************/ END TRY BEGIN CATCH DECLARE @SSISCatalogCallError NVARCHAR(MAX) SELECT @SSISCatalogCallError = ERROR_MESSAGE() EXEC [AUDIT].[FailPackageInstanceExecution] @PackageExecutionLogID, @SSISCatalogCallError GOTO ReturnTrueAsErrorFlag END CATCH; /******************************************************** ******************************************************** Section: end result ******************************************************** ********************************************************/ ReturnTrueAsErrorFlag: SELECT CONVERT(BIT, 1) AS PackageExecutionErrorExists ReturnFalseAsErrorFlagToSignalSuccess: SELECT CONVERT(BIT, 0) AS PackageExecutionErrorExists GO

Read the article

SQL SERVER – DQS Error – Cannot connect to server – A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessions” – SetDataQualitySessionPhaseTwo

- by pinaldave

Earlier I wrote a blog post about how to install DQS in SQL Server 2012. Today I decided to write a second part of this series where I explain how to use DQS, however, as soon as I started the DQS client, I encountered an error that will not let me pass through and connect with DQS client. It was a bit strange to me as everything was functioning very well when I left it last time. The error was very big but here are the first few words of it. Cannot connect to server. A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessions”: System.Data.SqlClient.SqlException (0×80131904): A .NET Framework error occurred during execution of user-defined routine or aggregate “SetDataQualitySessionPhaseTwo”: The error continues – here is the quick screenshot of the error. As my initial attempts could not fix the error I decided to search online and I finally received a wonderful solution from Microsoft Site. The error has happened due to latest update I had installed on .NET Framework 4. There was a mismatch between the Module Version IDs (MVIDs) of the SQL Common Language Runtime (SQLCLR) assemblies in the SQL Server 2012 database and the Global Assembly Cache (GAC). This mismatch was to be resolved for the DQS to work properly. The workaround is specified here in detail. Scroll to subtopic 4.23 Some .NET Framework 4 Updates Might Cause DQS to Fail. The script was very much straight forward. Here are the few things to not to miss while applying workaround. Make sure DQS client is properly closed The NETAssemblies is based on your OS. NETAssemblies for 64 bit machine – which is my machine is “c:\windows\Microsoft.NET\Framework64\v4.0.30319″. If you have Winodws installed on any other drive other than c:\windows do not forget to change that in the above path. Additionally if you have 32 bit version installed on c:\windows you should use path as ”c:\windows\Microsoft.NET\Framework\v4.0.30319″ Make sure that you execute the script specified in 4.23 sections in this article in the database DQS_MAIN. Do not run this in the master database as this will not fix your error. Do not forget to restart your SQL Services once above script has been executed. Once you open the client it will work this time. Here is the script which I have bit modified from original script. I strongly suggest that you use original script mentioned 4.23 sections. However, this one is customized my own machine. /* Original source: http://bit.ly/PXX4NE (Technet) Modifications: -- Added Database context -- Added environment variable @NETAssemblies -- Main script modified to use @NETAssemblies */ USE DQS_MAIN GO BEGIN -- Set your environment variable -- assumption - Windows is installed in c:\windows folder DECLARE @NETAssemblies NVARCHAR(200) -- For 64 bit uncomment following line SET @NETAssemblies = 'c:\windows\Microsoft.NET\Framework64\v4.0.30319\' -- For 32 bit uncomment following line -- SET @NETAssemblies = 'c:\windows\Microsoft.NET\Framework\v4.0.30319\' DECLARE @AssemblyName NVARCHAR(200), @RefreshCmd NVARCHAR(200), @ErrMsg NVARCHAR(200) DECLARE ASSEMBLY_CURSOR CURSOR FOR SELECT name AS NAME FROM sys.assemblies WHERE name NOT LIKE '%ssdqs%' AND name NOT LIKE '%microsoft.sqlserver.types%' AND name NOT LIKE '%practices%' AND name NOT LIKE '%office%' AND name NOT LIKE '%stdole%' AND name NOT LIKE '%Microsoft.Vbe.Interop%' OPEN ASSEMBLY_CURSOR FETCH NEXT FROM ASSEMBLY_CURSOR INTO @AssemblyName WHILE @@FETCH_STATUS = 0 BEGIN BEGIN TRY SET @RefreshCmd = 'ALTER ASSEMBLY [' + @AssemblyName + '] FROM ''' + @NETAssemblies + @AssemblyName + '.dll' + ''' WITH PERMISSION_SET = UNSAFE' EXEC sp_executesql @RefreshCmd PRINT 'Successfully upgraded assembly ''' + @AssemblyName + '''' END TRY BEGIN CATCH IF ERROR_NUMBER() != 6285 BEGIN SET @ErrMsg = ERROR_MESSAGE() PRINT 'Failed refreshing assembly ' + @AssemblyName + '. Error message: ' + @ErrMsg END END CATCH FETCH NEXT FROM ASSEMBLY_CURSOR INTO @AssemblyName END CLOSE ASSEMBLY_CURSOR DEALLOCATE ASSEMBLY_CURSOR END GO Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Error Messages, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

URL Rewrite – Protocol (http/https) in the Action

- by OWScott

IIS URL Rewrite supports server variables for pretty much every part of the URL and http header. However, there is one commonly used server variable that isn’t readily available. That’s the protocol—HTTP or HTTPS. You can easily check if a page request uses HTTP or HTTPS, but that only works in the conditions part of the rule. There isn’t a variable available to dynamically set the protocol in the action part of the rule. What I wish is that there would be a variable like {HTTP_PROTOCOL} which would have a value of ‘HTTP’ or ‘HTTPS’. There is a server variable called {HTTPS}, but the values of ‘on’ and ‘off’ aren’t practical in the action. You can also use {SERVER_PORT} or {SERVER_PORT_SECURE}, but again, they aren’t useful in the action. Let me illustrate. The following rule will redirect traffic for http(s)://localtest.me/ to http://www.localtest.me/. <rule name="Redirect to www"> <match url="(.*)" /> <conditions> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="http://www.localtest.me/{R:1}" /> </rule> The problem is that it forces the request to HTTP even if the original request was for HTTPS. Interestingly enough, I planned to blog about this topic this week when I noticed in my twitter feed yesterday that Jeff Graves, a former colleague of mine, just wrote an excellent blog post about this very topic. He beat me to the punch by just a couple days. However, I figured I would still write my blog post on this topic. While his solution is a excellent one, I personally handle this another way most of the time. Plus, it’s a commonly asked question that isn’t documented well enough on the web yet, so having another article on the web won’t hurt. I can think of four different ways to handle this, and depending on your situation you may lean towards any of the four. Don’t let the choices overwhelm you though. Let’s keep it simple, Option 1 is what I use most of the time, Option 2 is what Jeff proposed and is the safest option, and Option 3 and Option 4 need only be considered if you have a more unique situation. All four options will work for most situations. Option 1 – CACHE_URL, single rule There is a server variable that has the protocol in it; {CACHE_URL}. This server variable contains the entire URL string (e.g. http://www.localtest.me:80/info.aspx?id=5) All we need to do is extract the HTTP or HTTPS and we’ll be set. This tends to be my preferred way to handle this situation. Indeed, Jeff did briefly mention this in his blog post: … you could use a condition on the CACHE_URL variable and a back reference in the rewritten URL. The problem there is that you then need to match all of the conditions which could be a problem if your rule depends on a logical “or” match for conditions. Thus the problem. If you have multiple conditions set to “Match Any” rather than “Match All” then this option won’t work. However, I find that 95% of all rules that I write use “Match All” and therefore, being the lazy administrator that I am I like this simple solution that only requires adding a single condition to a rule. The caveat is that if you use “Match Any” then you must consider one of the next two options. Enough with the preamble. Here’s how it works. Add a condition that checks for {CACHE_URL} with a pattern of “^(.+)://” like so: How you have a back-reference to the part before the ://, which is our treasured HTTP or HTTPS. In URL Rewrite 2.0 or greater you can check the “Track capture groups across conditions”, make that condition the first condition, and you have yourself a back-reference of {C:1}. The “Redirect to www” example with support for maintaining the protocol, will become: <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions trackAllCaptures="true"> <add input="{CACHE_URL}" pattern="^(.+)://" /> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{C:1}://www.localtest.me/{R:1}" /> </rule> It’s not as easy as it would be if Microsoft gave us a built-in {HTTP_PROTOCOL} variable, but it’s pretty close. I also like this option since I often create rule examples for other people and this type of rule is portable since it’s self-contained within a single rule. Option 2 – Using a Rewrite Map For a safer rule that works for both “Match Any” and “Match All” situations, you can use the Rewrite Map solution that Jeff proposed. It’s a perfectly good solution with the only drawback being the ever so slight extra effort to set it up since you need to create a rewrite map before you create the rule. In other words, if you choose to use this as your sole method of handling the protocol, you’ll be safe. After you create a Rewrite Map called MapProtocol, you can use “{MapProtocol:{HTTPS}}” for the protocol within any rule action. Following is an example using a Rewrite Map. <rewrite> <rules> <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{MapProtocol:{HTTPS}}://www.localtest.me/{R:1}" /> </rule> </rules> <rewriteMaps> <rewriteMap name="MapProtocol"> <add key="on" value="https" /> <add key="off" value="http" /> </rewriteMap> </rewriteMaps> </rewrite> Option 3 – CACHE_URL, Multi-rule If you have many rules that will use the protocol, you can create your own server variable which can be used in subsequent rules. This option is no easier to set up than Option 2 above, but you can use it if you prefer the easier to remember syntax of {HTTP_PROTOCOL} vs. {MapProtocol:{HTTPS}}. The potential issue with this rule is that if you don’t have access to the server level (e.g. in a shared environment) then you cannot set server variables without permission. First, create a rule and place it at the top of the set of rules. You can create this at the server, site or subfolder level. However, if you create it at the site or subfolder level then the HTTP_PROTOCOL server variable needs to be approved at the server level. This can be achieved in IIS Manager by navigating to URL Rewrite at the server level, clicking on “View Server Variables” from the Actions pane, and added HTTP_PROTOCOL. If you create the rule at the server level then this step is not necessary. Following is an example of the first rule to create the HTTP_PROTOCOL and then a rule that uses it. The Create HTTP_PROTOCOL rule only needs to be created once on the server. <rule name="Create HTTP_PROTOCOL"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{CACHE_URL}" pattern="^(.+)://" /> </conditions> <serverVariables> <set name="HTTP_PROTOCOL" value="{C:1}" /> </serverVariables> <action type="None" /> </rule> <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{HTTP_PROTOCOL}://www.localtest.me/{R:1}" /> </rule> Option 4 – Multi-rule Just to be complete I’ll include an example of how to achieve the same thing with multiple rules. I don’t see any reason to use it over the previous examples, but I’ll include an example anyway. Note that it will only work with the “Match All” setting for the conditions. <rule name="Redirect to www - http" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> <add input="{HTTPS}" pattern="off" /> </conditions> <action type="Redirect" url="http://www.localtest.me/{R:1}" /> </rule> <rule name="Redirect to www - https" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> <add input="{HTTPS}" pattern="on" /> </conditions> <action type="Redirect" url="https://www.localtest.me/{R:1}" /> </rule> Conclusion Above are four working examples of methods to call the protocol (HTTP or HTTPS) from the action of a URL Rewrite rule. You can use whichever method you most prefer. I’ve listed them in the order that I favor them, although I could see some people preferring Option 2 as their first choice. In any of the cases, hopefully you can use this as a reference for when you need to use the protocol in the rule’s action when writing your URL Rewrite rules. Further information: Viewing all Server Variable for a site. URL Parts available to URL Rewrite Rules Further URL Rewrite articles

Read the article

Integrating Windows Form Click Once Application into SharePoint 2007 – Part 1 of 2

- by Kelly Jones

Last year, I had the opportunity to build a solution that involved integrating a Windows Form application into a SharePoint 2007 (WSS version 3.0). In this post, I’ll layout our architecture thinking and in part two, I’ll describe the technical details. Business Case Our challenge was this: we needed an easy way for a small group of our users to upload documents, in batches. They also needed to quickly set the meta data values, as well as set security on individual files. Using the out of the box uploads just didn’t fit. The single file upload allows set the meta data, but our users would be uploading dozens of files. The multiple upload would allow our users to upload batches of files, but it doesn’t allow them to set the meta data during upload. Also, neither upload method allows the users to set the permissions on the file. Our Solution We looked into building a web control of some kind, but ruled that out due to security complexities (if I remember correctly). Another option would have been using a technology like Silverlight (or Flash?), but our team didn’t have the skills necessary to build with these. So, after looking at what was technically possible, and also what skills our team had, we settled on a Windows Form application. We also decided to deliver it to the clients via Click Once, so we would have the ability to easily update the application in the future. Lessons Learned After deploying our solution, we’ve learned a few lessons. First, you’ll need to have the .Net Framework installed on the client computers. We knew this, but we still ran into issues making sure our users had the proper framework version installed. Second, we had issues with authentication. Our issues were due to our testing domain being a separate Active Directory domain from the domain that our end users and their workstations were members of. (See my earlier post about Clearing Saved Passwords for the fix to our problem). Our third issue was how we dealt with uploading files that were named the same. Our application would replace the existing file with the new file, which is the way we expected it to work. However, our users wanted to upload weekly reports, named the same as the previous week. We solved this by using folders within the document library to keep the sets of reports separate from previous weeks. One last thing to consider before implementing a solution like this, is what browsers and platforms your users will be working from. We only needed to support IE and Windows, which works fine. However, if you need to support Firefox, there are add-ons that allow Click Once to work with Firefox. This is still a Windows only solution though. In order to support Macs, you’d have to focus on either browser techniques (AJAX?) or Silverlight/Flash. Summary Our users are happy with the Click Once app. It allowed them to move all of their content to our SharePoint site in under a couple hours, which they were thrilled with. We’re happy because we can easily deploy updates, our development time was small, and we met all of our business requirements.

Read the article

Unobtrusive Client Side Validation with Dynamic Contents in ASP.NET MVC 3

- by imran_ku07

Introduction: A while ago, I blogged about how to perform client side validation for dynamic contents in ASP.NET MVC 2 at here. Using the approach given in that blog, you can easily validate your dynamic ajax contents at client side. ASP.NET MVC 3 also supports unobtrusive client side validation in addition to ASP.NET MVC 2 client side validation for backward compatibility. I feel it is worth to rewrite that blog post for ASP.NET MVC 3 unobtrusive client side validation. In this article I will show you how to do this. Description: I am going to use the same example presented at here. Create a new ASP.NET MVC 3 application. Then just open HomeController.cs and add the following code, public ActionResult CreateUser() { return View(); } [HttpPost] public ActionResult CreateUserPrevious(UserInformation u) { return View("CreateUserInformation", u); } [HttpPost] public ActionResult CreateUserInformation(UserInformation u) { if(ModelState.IsValid) return View("CreateUserCompanyInformation"); return View("CreateUserInformation"); } [HttpPost] public ActionResult CreateUserCompanyInformation(UserCompanyInformation uc, UserInformation ui) { if (ModelState.IsValid) return Content("Thank you for submitting your information"); return View("CreateUserCompanyInformation"); } Next create a CreateUser view and add the following lines, <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<UnobtrusiveValidationWithDynamicContents.Models.UserInformation>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> CreateUser </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <div id="dynamicData"> <%Html.RenderPartial("CreateUserInformation"); %> </div> </asp:Content> Next create a CreateUserInformation partial view and add the following lines, <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<UnobtrusiveValidationWithDynamicContents.Models.UserInformation>" %> <% Html.EnableClientValidation(); %> <%using (Html.BeginForm("CreateUserInformation", "Home")) { %> <table id="table1"> <tr style="background-color:#E8EEF4;font-weight:bold"> <td colspan="3" align="center"> User Information </td> </tr> <tr> <td> First Name </td> <td> <%=Html.TextBoxFor(a => a.FirstName)%> </td> <td> <%=Html.ValidationMessageFor(a => a.FirstName)%> </td> </tr> <tr> <td> Last Name </td> <td> <%=Html.TextBoxFor(a => a.LastName)%> </td> <td> <%=Html.ValidationMessageFor(a => a.LastName)%> </td> </tr> <tr> <td> Email </td> <td> <%=Html.TextBoxFor(a => a.Email)%> </td> <td> <%=Html.ValidationMessageFor(a => a.Email)%> </td> </tr> <tr> <td colspan="3" align="center"> <input type="submit" name="userInformation" value="Next"/> </td> </tr> </table> <%} %> <script type="text/javascript"> $("form").submit(function (e) { if ($(this).valid()) { $.post('<%= Url.Action("CreateUserInformation")%>', $(this).serialize(), function (data) { $("#dynamicData").html(data); $.validator.unobtrusive.parse($("#dynamicData")); }); } e.preventDefault(); }); </script> Next create a CreateUserCompanyInformation partial view and add the following lines, <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<UnobtrusiveValidationWithDynamicContents.Models.UserCompanyInformation>" %> <% Html.EnableClientValidation(); %> <%using (Html.BeginForm("CreateUserCompanyInformation", "Home")) { %> <table id="table1"> <tr style="background-color:#E8EEF4;font-weight:bold"> <td colspan="3" align="center"> User Company Information </td> </tr> <tr> <td> Company Name </td> <td> <%=Html.TextBoxFor(a => a.CompanyName)%> </td> <td> <%=Html.ValidationMessageFor(a => a.CompanyName)%> </td> </tr> <tr> <td> Company Address </td> <td> <%=Html.TextBoxFor(a => a.CompanyAddress)%> </td> <td> <%=Html.ValidationMessageFor(a => a.CompanyAddress)%> </td> </tr> <tr> <td> Designation </td> <td> <%=Html.TextBoxFor(a => a.Designation)%> </td> <td> <%=Html.ValidationMessageFor(a => a.Designation)%> </td> </tr> <tr> <td colspan="3" align="center"> <input type="button" id="prevButton" value="Previous"/> <input type="submit" name="userCompanyInformation" value="Next"/> <%=Html.Hidden("FirstName")%> <%=Html.Hidden("LastName")%> <%=Html.Hidden("Email")%> </td> </tr> </table> <%} %> <script type="text/javascript"> $("#prevButton").click(function () { $.post('<%= Url.Action("CreateUserPrevious")%>', $($("form")[0]).serialize(), function (data) { $("#dynamicData").html(data); $.validator.unobtrusive.parse($("#dynamicData")); }); }); $("form").submit(function (e) { if ($(this).valid()) { $.post('<%= Url.Action("CreateUserCompanyInformation")%>', $(this).serialize(), function (data) { $("#dynamicData").html(data); $.validator.unobtrusive.parse($("#dynamicData")); }); } e.preventDefault(); }); </script> Next create a new class file UserInformation.cs inside Model folder and add the following code, public class UserInformation { public int Id { get; set; } [Required(ErrorMessage = "First Name is required")] [StringLength(10, ErrorMessage = "First Name max length is 10")] public string FirstName { get; set; } [Required(ErrorMessage = "Last Name is required")] [StringLength(10, ErrorMessage = "Last Name max length is 10")] public string LastName { get; set; } [Required(ErrorMessage = "Email is required")] [RegularExpression(@"^\w+([-+.']\w+)*@\w+([-.]\w+)*\.\w+([-.]\w+)*$", ErrorMessage = "Email Format is wrong")] public string Email { get; set; } } Next create a new class file UserCompanyInformation.cs inside Model folder and add the following code, public class UserCompanyInformation { public int UserId { get; set; } [Required(ErrorMessage = "Company Name is required")] [StringLength(10, ErrorMessage = "Company Name max length is 10")] public string CompanyName { get; set; } [Required(ErrorMessage = "CompanyAddress is required")] [StringLength(50, ErrorMessage = "Company Address max length is 50")] public string CompanyAddress { get; set; } [Required(ErrorMessage = "Designation is required")] [StringLength(50, ErrorMessage = "Designation max length is 10")] public string Designation { get; set; } } Next add the necessary script files in Site.Master, <script src="<%= Url.Content("~/Scripts/jquery-1.4.4.min.js")%>" type="text/javascript"></script> <script src="<%= Url.Content("~/Scripts/jquery.validate.min.js")%>" type="text/javascript"></script> <script src="<%= Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")%>" type="text/javascript"></script> Now run this application. You will get the same behavior as described in this article. The key important feature to note here is the $.validator.unobtrusive.parse method, which is used by ASP.NET MVC 3 unobtrusive client side validation to initialize jQuery validation plug-in to start the client side validation process. Another important method to note here is the jQuery.valid method which return true if the form is valid and return false if the form is not valid . Summary: There may be several occasions when you need to load your HTML contents dynamically. These dynamic HTML contents may also include some input elements and you need to perform some client side validation for these input elements before posting thier values to server. In this article I shows you how you can enable client side validation for dynamic input elements in ASP.NET MVC 3. I am also attaching a sample application. Hopefully you will enjoy this article too. SyntaxHighlighter.all()

Read the article

MVC 2 jQuery Client-side Validation

- by nmarun

Well, I watched Phil Haack’s show What's New in Microsoft ASP.NET MVC 2 and was impressed about the client-side validation (starts at 17:45) that MVC 2 offers. I tried creating the same, but Phil does not show what .js files need to be included and also I was not able to find the source code for the application that he used. In order to find out the required JavaScript file references, I added all of the files in my application to the page and ran it. Of course it worked, but this is definitely not an optimum solution. By removing one at a time and testing the app, I’ve short-listed the following ones: 1: <script src="../../Scripts/jquery-1.4.1.min.js" type="text/javascript"></script 2: <script src="../../Scripts/MicrosoftAjax.js" type="text/javascript"></script> 3: <script src="../../Scripts/MicrosoftMvcValidation.js" type="text/javascript"></script> Now, a little about the feature itself. Say, I’m working with a Book application so my model will look something like: 1: public class Book 2: { 3: [HiddenInput(DisplayValue = false)] 4: public int BookId { get; set; } 5: 6: [DisplayName("Book Title")] 7: [Required(ErrorMessage = "Book title is required")] 8: [StringLength(20, ErrorMessage = "Must be under 20 characters")] 9: public string Title { get; set; } 10: 11: [Required(ErrorMessage = "Author is required")] 12: [StringLength(40, ErrorMessage = "Must be under 40 characters")] 13: public string Author { get; set; } 14: 15: public decimal Price { get; set; } 16: 17: [DisplayName("ISBN")] 18: [StringLength(13, ErrorMessage = "Must be 13 characters")] 19: public string Isbn { get; set; } 20: } This ensures that the data passed will be validated upon post. But what would happen if you add the line (along with the above mentioned .js files): 1: <% Html.EnableClientValidation(); %> Now, this acts as ‘on-the-fly’ or ‘real-time’ validation. Now, when the user types 20 characters for the Title, the error shows up right on the 21st character. Beautiful… and you do not have to create the JavaScript function(s) for this. They’re auto-magically created for you. (Doing a ‘View Source’ on the browser page shows you the JavaScript logic that goes on behind the scenes). I bumped into another post that shows how .net 4 allows us to create custom validation attributes: Dynamic Range validation in MVC 2. This will help us attach virtually any business logic to the model itself. Please see the source code I’ve worked with.

Read the article

Windows Azure: Announcing release of Windows Azure SDK 2.2 (with lots of goodies)

- by ScottGu

Earlier today I blogged about a big update we made today to Windows Azure, and some of the great new features it provides. Today I’m also excited to also announce the release of the Windows Azure SDK 2.2. Today’s SDK release adds even more great features including: Visual Studio 2013 Support Integrated Windows Azure Sign-In support within Visual Studio Remote Debugging Cloud Services with Visual Studio Firewall Management support within Visual Studio for SQL Databases Visual Studio 2013 RTM VM Images for MSDN Subscribers Windows Azure Management Libraries for .NET Updated Windows Azure PowerShell Cmdlets and ScriptCenter The below post has more details on what’s available in today’s Windows Azure SDK 2.2 release. Also head over to Channel 9 to see the new episode of the Visual Studio Toolbox show that will be available shortly, and which highlights these features in a video demonstration. Visual Studio 2013 Support Version 2.2 of the Window Azure SDK is the first official version of the SDK to support the final RTM release of Visual Studio 2013. If you installed the 2.1 SDK with the Preview of Visual Studio 2013 we recommend that you upgrade your projects to SDK 2.2. SDK 2.2 also works side by side with the SDK 2.0 and SDK 2.1 releases on Visual Studio 2012: Integrated Windows Azure Sign In within Visual Studio Integrated Windows Azure Sign-In support within Visual Studio is one of the big improvements added with this Windows Azure SDK release. Integrated sign-in support enables developers to develop/test/manage Windows Azure resources within Visual Studio without having to download or use management certificates. You can now just right-click on the “Windows Azure” icon within the Server Explorer inside Visual Studio and choose the “Connect to Windows Azure” context menu option to connect to Windows Azure: Doing this will prompt you to enter the email address of the account you wish to sign-in with: You can use either a Microsoft Account (e.g. Windows Live ID) or an Organizational account (e.g. Active Directory) as the email. The dialog will update with an appropriate login prompt depending on which type of email address you enter: Once you sign-in you’ll see the Windows Azure resources that you have permissions to manage show up automatically within the Visual Studio Server Explorer (and you can start using them): With this new integrated sign in experience you are now able to publish web apps, deploy VMs and cloud services, use Windows Azure diagnostics, and fully interact with your Windows Azure services within Visual Studio without the need for a management certificate. All of the authentication is handled using the Windows Azure Active Directory associated with your Windows Azure account (details on this can be found in my earlier blog post). Integrating authentication this way end-to-end across the Service Management APIs + Dev Tools + Management Portal + PowerShell automation scripts enables a much more secure and flexible security model within Windows Azure, and makes it much more convenient to securely manage multiple developers + administrators working on a project. It also allows organizations and enterprises to use the same authentication model that they use for their developers on-premises in the cloud. It also ensures that employees who leave an organization immediately lose access to their company’s cloud based resources once their Active Directory account is suspended. Filtering/Subscription Management Once you login within Visual Studio, you can filter which Windows Azure subscriptions/regions are visible within the Server Explorer by right-clicking the “Filter Services” context menu within the Server Explorer. You can also use the “Manage Subscriptions” context menu to mange your Windows Azure Subscriptions: Bringing up the “Manage Subscriptions” dialog allows you to see which accounts you are currently using, as well as which subscriptions are within them: The “Certificates” tab allows you to continue to import and use management certificates to manage Windows Azure resources as well. We have not removed any functionality with today’s update – all of the existing scenarios that previously supported management certificates within Visual Studio continue to work just fine. The new integrated sign-in support provided with today’s release is purely additive. Note: the SQL Database node and the Mobile Service node in Server Explorer do not support integrated sign-in at this time. Therefore, you will only see databases and mobile services under those nodes if you have a management certificate to authorize access to them. We will enable them with integrated sign-in in a future update. Remote Debugging Cloud Resources within Visual Studio Today’s Windows Azure SDK 2.2 release adds support for remote debugging many types of Windows Azure resources. With live, remote debugging support from within Visual Studio, you are now able to have more visibility than ever before into how your code is operating live in Windows Azure. Let’s walkthrough how to enable remote debugging for a Cloud Service: Remote Debugging of Cloud Services To enable remote debugging for your cloud service, select Debug as the Build Configuration on the Common Settings tab of your Cloud Service’s publish dialog wizard: Then click the Advanced Settings tab and check the Enable Remote Debugging for all roles checkbox: Once your cloud service is published and running live in the cloud, simply set a breakpoint in your local source code: Then use Visual Studio’s Server Explorer to select the Cloud Service instance deployed in the cloud, and then use the Attach Debugger context menu on the role or to a specific VM instance of it: Once the debugger attaches to the Cloud Service, and a breakpoint is hit, you’ll be able to use the rich debugging capabilities of Visual Studio to debug the cloud instance remotely, in real-time, and see exactly how your app is running in the cloud. Today’s remote debugging support is super powerful, and makes it much easier to develop and test applications for the cloud. Support for remote debugging Cloud Services is available as of today, and we’ll also enable support for remote debugging Web Sites shortly. Firewall Management Support with SQL Databases By default we enable a security firewall around SQL Databases hosted within Windows Azure. This ensures that only your application (or IP addresses you approve) can connect to them and helps make your infrastructure secure by default. This is great for protection at runtime, but can sometimes be a pain at development time (since by default you can’t connect/manage the database remotely within Visual Studio if the security firewall blocks your instance of VS from connecting to it). One of the cool features we’ve added with today’s release is support that makes it easy to enable and configure the security firewall directly within Visual Studio. Now with the SDK 2.2 release, when you try and connect to a SQL Database using the Visual Studio Server Explorer, and a firewall rule prevents access to the database from your machine, you will be prompted to add a firewall rule to enable access from your local IP address: You can simply click Add Firewall Rule and a new rule will be automatically added for you. In some cases, the logic to detect your local IP may not be sufficient (for example: you are behind a corporate firewall that uses a range of IP addresses) and you may need to set up a firewall rule for a range of IP addresses in order to gain access. The new Add Firewall Rule dialog also makes this easy to do. Once connected you’ll be able to manage your SQL Database directly within the Visual Studio Server Explorer: This makes it much easier to work with databases in the cloud. Visual Studio 2013 RTM Virtual Machine Images Available for MSDN Subscribers Last week we released the General Availability Release of Visual Studio 2013 to the web. This is an awesome release with a ton of new features. With today’s Windows Azure update we now have a set of pre-configured VM images of VS 2013 available within the Windows Azure Management Portal for use by MSDN customers. This enables you to create a VM in the cloud with VS 2013 pre-installed on it in with only a few clicks: Windows Azure now provides the fastest and easiest way to get started doing development with Visual Studio 2013. Windows Azure Management Libraries for .NET (Preview) Having the ability to automate the creation, deployment, and tear down of resources is a key requirement for applications running in the cloud. It also helps immensely when running dev/test scenarios and coded UI tests against pre-production environments. Today we are releasing a preview of a new set of Windows Azure Management Libraries for .NET. These new libraries make it easy to automate tasks using any .NET language (e.g. C#, VB, F#, etc). Previously this automation capability was only available through the Windows Azure PowerShell Cmdlets or to developers who were willing to write their own wrappers for the Windows Azure Service Management REST API. Modern .NET Developer Experience We’ve worked to design easy-to-understand .NET APIs that still map well to the underlying REST endpoints, making sure to use and expose the modern .NET functionality that developers expect today: Portable Class Library (PCL) support targeting applications built for any .NET Platform (no platform restriction) Shipped as a set of focused NuGet packages with minimal dependencies to simplify versioning Support async/await task based asynchrony (with easy sync overloads) Shared infrastructure for common error handling, tracing, configuration, HTTP pipeline manipulation, etc. Factored for easy testability and mocking Built on top of popular libraries like HttpClient and Json.NET Below is a list of a few of the management client classes that are shipping with today’s initial preview release: .NET Class Name Supports Operations for these Assets (and potentially more) ManagementClient Locations Credentials Subscriptions Certificates ComputeManagementClient Hosted Services Deployments Virtual Machines Virtual Machine Images & Disks StorageManagementClient Storage Accounts WebSiteManagementClient Web Sites Web Site Publish Profiles Usage Metrics Repositories VirtualNetworkManagementClient Networks Gateways Automating Creating a Virtual Machine using .NET Let’s walkthrough an example of how we can use the new Windows Azure Management Libraries for .NET to fully automate creating a Virtual Machine. I’m deliberately showing a scenario with a lot of custom options configured – including VHD image gallery enumeration, attaching data drives, network endpoints + firewall rules setup - to show off the full power and richness of what the new library provides. We’ll begin with some code that demonstrates how to enumerate through the built-in Windows images within the standard Windows Azure VM Gallery. We’ll search for the first VM image that has the word “Windows” in it and use that as our base image to build the VM from. We’ll then create a cloud service container in the West US region to host it within: We can then customize some options on it such as setting up a computer name, admin username/password, and hostname. We’ll also open up a remote desktop (RDP) endpoint through its security firewall: We’ll then specify the VHD host and data drives that we want to mount on the Virtual Machine, and specify the size of the VM we want to run it in: Once everything has been set up the call to create the virtual machine is executed asynchronously In a few minutes we’ll then have a completely deployed VM running on Windows Azure with all of the settings (hard drives, VM size, machine name, username/password, network endpoints + firewall settings) fully configured and ready for us to use: Preview Availability via NuGet The Windows Azure Management Libraries for .NET are now available via NuGet. Because they are still in preview form, you’ll need to add the –IncludePrerelease switch when you go to retrieve the packages. The Package Manager Console screen shot below demonstrates how to get the entire set of libraries to manage your Windows Azure assets: You can also install them within your .NET projects by right clicking on the VS Solution Explorer and using the Manage NuGet Packages context menu command. Make sure to select the “Include Prerelease” drop-down for them to show up, and then you can install the specific management libraries you need for your particular scenarios: Open Source License The new Windows Azure Management Libraries for .NET make it super easy to automate management operations within Windows Azure – whether they are for Virtual Machines, Cloud Services, Storage Accounts, Web Sites, and more. Like the rest of the Windows Azure SDK, we are releasing the source code under an open source (Apache 2) license and it is hosted at https://github.com/WindowsAzure/azure-sdk-for-net/tree/master/libraries if you wish to contribute. PowerShell Enhancements and our New Script Center Today, we are also shipping Windows Azure PowerShell 0.7.0 (which is a separate download). You can find the full change log here. Here are some of the improvements provided with it: Windows Azure Active Directory authentication support Script Center providing many sample scripts to automate common tasks on Windows Azure New cmdlets for Media Services and SQL Database Script Center Windows Azure enables you to script and automate a lot of tasks using PowerShell. People often ask for more pre-built samples of common scenarios so that they can use them to learn and tweak/customize. With this in mind, we are excited to introduce a new Script Center that we are launching for Windows Azure. You can learn about how to scripting with Windows Azure with a get started article. You can then find many sample scripts across different solutions, including infrastructure, data management, web, and more: All of the sample scripts are hosted on TechNet with links from the Windows Azure Script Center. Each script is complete with good code comments, detailed descriptions, and examples of usage. Summary Visual Studio 2013 and the Windows Azure SDK 2.2 make it easier than ever to get started developing rich cloud applications. Along with the Windows Azure Developer Center’s growing set of .NET developer resources to guide your development efforts, today’s Windows Azure SDK 2.2 release should make your development experience more enjoyable and efficient. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

SQL SERVER – A Puzzle – Swap Value of Column Without Case Statement

- by pinaldave

For the last few weeks, I have been doing Friday Puzzles and I am really loving it. Yesterday I received a very interesting question by Navneet Chaurasia on Facebook Page. He was asked this question in one of the interview questions for job. Please read the original thread for a complete idea of the conversation. I am presenting the same question here. Puzzle Let us assume there is a single column in the table called Gender. The challenge is to write a single update statement which will flip or swap the value in the column. For example if the value in the gender column is ‘male’ swap it with ‘female’ and if the value is ‘female’ swap it with ‘male’. Here is the quick setup script for the puzzle. USE tempdb GO CREATE TABLE SimpleTable (ID INT, Gender VARCHAR(10)) GO INSERT INTO SimpleTable (ID, Gender) SELECT 1, 'female' UNION ALL SELECT 2, 'male' UNION ALL SELECT 3, 'male' GO SELECT * FROM SimpleTable GO The above query will return following result set. The puzzle was to write a single update column which will generate following result set. There are multiple answers to this simple puzzle. Let me show you three different ways. I am assuming that the column will have either value ‘male’ or ‘female’ only. Method 1: Using CASE Statement I believe this is going to be the most popular solution as we are all familiar with CASE Statement. UPDATE SimpleTable SET Gender = CASE Gender WHEN 'male' THEN 'female' ELSE 'male' END GO SELECT * FROM SimpleTable GO Method 2: Using REPLACE Function I totally understand it is the not cleanest solution but it will for sure work in giving situation. UPDATE SimpleTable SET Gender = REPLACE(('fe'+Gender),'fefe','') GO SELECT * FROM SimpleTable GO Method 3: Using IIF in SQL Server 2012 If you are using SQL Server 2012 you can use IIF and get the same effect as CASE statement. UPDATE SimpleTable SET Gender = IIF(Gender = 'male', 'female', 'male') GO SELECT * FROM SimpleTable GO You can read my article series on SQL Server 2012 various functions over here. SQL SERVER – Denali – Logical Function – IIF() – A Quick Introduction SQL SERVER – Detecting Leap Year in T-SQL using SQL Server 2012 – IIF, EOMONTH and CONCAT Function Let us clean up. DROP TABLE SimpleTable GO Question to you: I came up with three simple tricks where there is a single UPDATE statement which swaps the values in the column. Do you know any other simple trick? If yes, please post here in the comments. I will pick two random winners from all the valid answers. Winners will get 1) Print Copy of SQL Server Interview Questions and Answers 2) Free Learning Code for Online Video Courses I will announce the winners on coming Monday. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: CodeProject, PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

Read the article

Plan Caching and Query Memory Part II (Hash Match) – When not to use stored procedure - Most common performance mistake SQL Server developers make.

- by sqlworkshops

SQL Server estimates Memory requirement at compile time, when stored procedure or other plan caching mechanisms like sp_executesql or prepared statement are used, the memory requirement is estimated based on first set of execution parameters. This is a common reason for spill over tempdb and hence poor performance. Common memory allocating queries are that perform Sort and do Hash Match operations like Hash Join or Hash Aggregation or Hash Union. This article covers Hash Match operations with examples. It is recommended to read Plan Caching and Query Memory Part I before this article which covers an introduction and Query memory for Sort. In most cases it is cheaper to pay for the compilation cost of dynamic queries than huge cost for spill over tempdb, unless memory requirement for a query does not change significantly based on predicates. This article covers underestimation / overestimation of memory for Hash Match operation. Plan Caching and Query Memory Part I covers underestimation / overestimation for Sort. It is important to note that underestimation of memory for Sort and Hash Match operations lead to spill over tempdb and hence negatively impact performance. Overestimation of memory affects the memory needs of other concurrently executing queries. In addition, it is important to note, with Hash Match operations, overestimation of memory can actually lead to poor performance. To read additional articles I wrote click here. The best way to learn is to practice. To create the below tables and reproduce the behavior, join the mailing list by using this link: www.sqlworkshops.com/ml and I will send you the table creation script. Most of these concepts are also covered in our webcasts: www.sqlworkshops.com/webcasts Let’s create a Customer’s State table that has 99% of customers in NY and the rest 1% in WA.Customers table used in Part I of this article is also used here.To observe Hash Warning, enable 'Hash Warning' in SQL Profiler under Events 'Errors and Warnings'. --Example provided by www.sqlworkshops.com drop table CustomersState go create table CustomersState (CustomerID int primary key, Address char(200), State char(2)) go insert into CustomersState (CustomerID, Address) select CustomerID, 'Address' from Customers update CustomersState set State = 'NY' where CustomerID % 100 != 1 update CustomersState set State = 'WA' where CustomerID % 100 = 1 go update statistics CustomersState with fullscan go Let’s create a stored procedure that joins customers with CustomersState table with a predicate on State. --Example provided by www.sqlworkshops.com create proc CustomersByState @State char(2) as begin declare @CustomerID int select @CustomerID = e.CustomerID from Customers e inner join CustomersState es on (e.CustomerID = es.CustomerID) where es.State = @State option (maxdop 1) end go Let’s execute the stored procedure first with parameter value ‘WA’ – which will select 1% of data. set statistics time on go --Example provided by www.sqlworkshops.com exec CustomersByState 'WA' goThe stored procedure took 294 ms to complete. The stored procedure was granted 6704 KB based on 8000 rows being estimated. The estimated number of rows, 8000 is similar to actual number of rows 8000 and hence the memory estimation should be ok. There was no Hash Warning in SQL Profiler. To observe Hash Warning, enable 'Hash Warning' in SQL Profiler under Events 'Errors and Warnings'. Now let’s execute the stored procedure with parameter value ‘NY’ – which will select 99% of data. -Example provided by www.sqlworkshops.com exec CustomersByState 'NY' go The stored procedure took 2922 ms to complete. The stored procedure was granted 6704 KB based on 8000 rows being estimated. The estimated number of rows, 8000 is way different from the actual number of rows 792000 because the estimation is based on the first set of parameter value supplied to the stored procedure which is ‘WA’ in our case. This underestimation will lead to spill over tempdb, resulting in poor performance. There was Hash Warning (Recursion) in SQL Profiler. To observe Hash Warning, enable 'Hash Warning' in SQL Profiler under Events 'Errors and Warnings'. Let’s recompile the stored procedure and then let’s first execute the stored procedure with parameter value ‘NY’. In a production instance it is not advisable to use sp_recompile instead one should use DBCC FREEPROCCACHE (plan_handle). This is due to locking issues involved with sp_recompile, refer to our webcasts, www.sqlworkshops.com/webcasts for further details. exec sp_recompile CustomersByState go --Example provided by www.sqlworkshops.com exec CustomersByState 'NY' go Now the stored procedure took only 1046 ms instead of 2922 ms. The stored procedure was granted 146752 KB of memory. The estimated number of rows, 792000 is similar to actual number of rows of 792000. Better performance of this stored procedure execution is due to better estimation of memory and avoiding spill over tempdb. There was no Hash Warning in SQL Profiler. Now let’s execute the stored procedure with parameter value ‘WA’. --Example provided by www.sqlworkshops.com exec CustomersByState 'WA' go The stored procedure took 351 ms to complete, higher than the previous execution time of 294 ms. This stored procedure was granted more memory (146752 KB) than necessary (6704 KB) based on parameter value ‘NY’ for estimation (792000 rows) instead of parameter value ‘WA’ for estimation (8000 rows). This is because the estimation is based on the first set of parameter value supplied to the stored procedure which is ‘NY’ in this case. This overestimation leads to poor performance of this Hash Match operation, it might also affect the performance of other concurrently executing queries requiring memory and hence overestimation is not recommended. The estimated number of rows, 792000 is much more than the actual number of rows of 8000. Intermediate Summary: This issue can be avoided by not caching the plan for memory allocating queries. Other possibility is to use recompile hint or optimize for hint to allocate memory for predefined data range.Let’s recreate the stored procedure with recompile hint. --Example provided by www.sqlworkshops.com drop proc CustomersByState go create proc CustomersByState @State char(2) as begin declare @CustomerID int select @CustomerID = e.CustomerID from Customers e inner join CustomersState es on (e.CustomerID = es.CustomerID) where es.State = @State option (maxdop 1, recompile) end go Let’s execute the stored procedure initially with parameter value ‘WA’ and then with parameter value ‘NY’. --Example provided by www.sqlworkshops.com exec CustomersByState 'WA' go exec CustomersByState 'NY' go The stored procedure took 297 ms and 1102 ms in line with previous optimal execution times. The stored procedure with parameter value ‘WA’ has good estimation like before. Estimated number of rows of 8000 is similar to actual number of rows of 8000. The stored procedure with parameter value ‘NY’ also has good estimation and memory grant like before because the stored procedure was recompiled with current set of parameter values. Estimated number of rows of 792000 is similar to actual number of rows of 792000. The compilation time and compilation CPU of 1 ms is not expensive in this case compared to the performance benefit. There was no Hash Warning in SQL Profiler. Let’s recreate the stored procedure with optimize for hint of ‘NY’. --Example provided by www.sqlworkshops.com drop proc CustomersByState go create proc CustomersByState @State char(2) as begin declare @CustomerID int select @CustomerID = e.CustomerID from Customers e inner join CustomersState es on (e.CustomerID = es.CustomerID) where es.State = @State option (maxdop 1, optimize for (@State = 'NY')) end go Let’s execute the stored procedure initially with parameter value ‘WA’ and then with parameter value ‘NY’. --Example provided by www.sqlworkshops.com exec CustomersByState 'WA' go exec CustomersByState 'NY' go The stored procedure took 353 ms with parameter value ‘WA’, this is much slower than the optimal execution time of 294 ms we observed previously. This is because of overestimation of memory. The stored procedure with parameter value ‘NY’ has optimal execution time like before. The stored procedure with parameter value ‘WA’ has overestimation of rows because of optimize for hint value of ‘NY’. Unlike before, more memory was estimated to this stored procedure based on optimize for hint value ‘NY’. The stored procedure with parameter value ‘NY’ has good estimation because of optimize for hint value of ‘NY’. Estimated number of rows of 792000 is similar to actual number of rows of 792000. Optimal amount memory was estimated to this stored procedure based on optimize for hint value ‘NY’. There was no Hash Warning in SQL Profiler. This article covers underestimation / overestimation of memory for Hash Match operation. Plan Caching and Query Memory Part I covers underestimation / overestimation for Sort. It is important to note that underestimation of memory for Sort and Hash Match operations lead to spill over tempdb and hence negatively impact performance. Overestimation of memory affects the memory needs of other concurrently executing queries. In addition, it is important to note, with Hash Match operations, overestimation of memory can actually lead to poor performance. Summary: Cached plan might lead to underestimation or overestimation of memory because the memory is estimated based on first set of execution parameters. It is recommended not to cache the plan if the amount of memory required to execute the stored procedure has a wide range of possibilities. One can mitigate this by using recompile hint, but that will lead to compilation overhead. However, in most cases it might be ok to pay for compilation rather than spilling sort over tempdb which could be very expensive compared to compilation cost. The other possibility is to use optimize for hint, but in case one sorts more data than hinted by optimize for hint, this will still lead to spill. On the other side there is also the possibility of overestimation leading to unnecessary memory issues for other concurrently executing queries. In case of Hash Match operations, this overestimation of memory might lead to poor performance. When the values used in optimize for hint are archived from the database, the estimation will be wrong leading to worst performance, so one has to exercise caution before using optimize for hint, recompile hint is better in this case. I explain these concepts with detailed examples in my webcasts (www.sqlworkshops.com/webcasts), I recommend you to watch them. The best way to learn is to practice. To create the above tables and reproduce the behavior, join the mailing list at www.sqlworkshops.com/ml and I will send you the relevant SQL Scripts. Register for the upcoming 3 Day Level 400 Microsoft SQL Server 2008 and SQL Server 2005 Performance Monitoring & Tuning Hands-on Workshop in London, United Kingdom during March 15-17, 2011, click here to register / Microsoft UK TechNet.These are hands-on workshops with a maximum of 12 participants and not lectures. For consulting engagements click here. Disclaimer and copyright information:This article refers to organizations and products that may be the trademarks or registered trademarks of their various owners. Copyright of this article belongs to R Meyyappan / www.sqlworkshops.com. You may freely use the ideas and concepts discussed in this article with acknowledgement (www.sqlworkshops.com), but you may not claim any of it as your own work. This article is for informational purposes only; you use any of the suggestions given here entirely at your own risk. R Meyyappan [email protected] LinkedIn: http://at.linkedin.com/in/rmeyyappan

Read the article

Building a SOA/BPM/BAM Cluster Part I – Preparing the Environment

- by antony.reynolds

An increasing number of customers are using SOA Suite in a cluster configuration, I might hazard to say that the majority of production deployments are now using SOA clusters. So I thought it may be useful to detail the steps in building an 11g cluster and explain a little about why things are done the way they are. In this series of posts I will explain how to build a SOA/BPM cluster using the Enterprise Deployment Guide. This post will explain the setting required to prepare the cluster for installation and configuration. Software Required The following software is required for an 11.1.1.3 SOA/BPM install. Software Version Notes Oracle Database Certified databases are listed here SOA & BPM Suites require a working database installation. Repository Creation Utility (RCU) 11.1.1.3 If upgrading an 11.1.1.2 repository then a separate script is available. Web Tier Utilities 11.1.1.3 Provides Web Server, 11.1.1.3 is an upgrade to 11.1.1.2, so 11.1.1.2 must be installed first. Web Tier Utilities 11.1.1.3 Web Server, 11.1.1.3 Patch. You can use the 11.1.1.2 version without problems. Oracle WebLogic Server 11gR1 10.3.3 This is the host platform for 11.1.1.3 SOA/BPM Suites. SOA Suite 11.1.1.2 SOA Suite 11.1.1.3 is an upgrade to 11.1.1.2, so 11.1.1.2 must be installed first. SOA Suite 11.1.1.3 SOA Suite 11.1.1.3 patch, requires 11.1.12 to have been installed. My installation was performed on Oracle Enterprise Linux 5.4 64-bit. Database I will not cover setting up the database in this series other than to identify the database requirements. If setting up a SOA cluster then ideally we would also be using a RAC database. I assume that this is running on separate machines to the SOA cluster. Section 2.1, “Database”, of the EDG covers the database configuration in detail. Settings The database should have processes set to at least 400 if running SOA/BPM and BAM. alter system set processes=400 scope=spfile Run RCU The Repository Creation Utility creates the necessary database tables for the SOA Suite. The RCU can be run from any machine that can access the target database. In 11g the RCU creates a number of pre-defined users and schema with a user defiend prefix. This allows you to have multiple 11g installations in the same database. After running the RCU you need to grant some additional privileges to the soainfra user. The soainfra user should have privileges on the transaction tables. grant select on sys.dba_pending_transactions to prefix_soainfra Grant force any transaction to prefix_soainfra Machines The cluster will be built on the following machines. EDG Name is the name used for this machine in the EDG. Notes are a description of the purpose of the machine. EDG Name Notes LB External load balancer to distribute load across and failover between web servers. WEBHOST1 Hosts a web server. WEBHOST2 Hosts a web server. SOAHOST1 Hosts SOA components. SOAHOST2 Hosts SOA components. BAMHOST1 Hosts BAM components. BAMHOST2 Hosts BAM components. Note that it is possible to collapse the BAM servers so that they run on the same machines as the SOA servers. In this case BAMHOST1 and SOAHOST1 would be the same, as would BAMHOST2 and SOAHOST2. The cluster may include more than 2 servers and in this case we add SOAHOST3, SOAHOST4 etc as needed. My cluster has WEBHOST1, SOAHOST1 and BAMHOST1 all running on a single machine. Software Components The cluster will use the following software components. EDG Name is the name used for this machine in the EDG. Type is the type of component, generally a WebLogic component. Notes are a description of the purpose of the component. EDG Name Type Notes AdminServer Admin Server Domain Admin Server WLS_WSM1 Managed Server Web Services Manager Policy Manager Server WLS_WSM2 Managed Server Web Services Manager Policy Manager Server WLS_SOA1 Managed Server SOA/BPM Managed Server WLS_SOA2 Managed Server SOA/BPM Managed Server WLS_BAM1 Managed Server BAM Managed Server running Active Data Cache WLS_BAM2 Managed Server BAM Manager Server without Active Data Cache Node Manager Will run on all hosts with WLS servers OHS1 Web Server Oracle HTTP Server OHS2 Web Server Oracle HTTP Server LB Load Balancer Load Balancer, not part of SOA Suite The above assumes a 2 node cluster. Network Configuration The SOA cluster requires an extensive amount of network configuration. I would recommend assigning a private sub-net (internal IP addresses such as 10.x.x.x, 192.168.x.x or 172.168.x.x) to the cluster for use by addresses that only need to be accessible to the Load Balancer or other cluster members. Section 2.2, "Network", of the EDG covers the network configuration in detail. EDG Name is the hostname used in the EDG. IP Name is the IP address name used in the EDG. Type is the type of IP address: Fixed is fixed to a single machine. Floating is assigned to one of several machines to allow for server migration. Virtual is assigned to a load balancer and used to distribute load across several machines. Host is the host where this IP address is active. Note for floating IP addresses a range of hosts is given. Bound By identifies which software component will use this IP address. Scope shows where this IP address needs to be resolved. Cluster scope addresses only have to be resolvable by machines in the cluster, i.e. the machines listed in the previous section. These addresses are only used for inter-cluster communication or for access by the load balancer. Internal scope addresses Notes are comments on why that type of IP is used. EDG Name IP Name Type Host Bound By Scope Notes ADMINVHN VIP1 Floating SOAHOST1-SOAHOSTn AdminServer Cluster Admin server, must be able to migrate between SOA server machines. SOAHOST1 IP1 Fixed SOAHOST1 NodeManager, WLS_WSM1 Cluster WSM Server 1 does not require server migration. SOAHOST2 IP2 Fixed SOAHOST1 NodeManager, WLS_WSM2 Cluster WSM Server 2 does not require server migration SOAHOST1VHN VIP2 Floating SOAHOST1-SOAHOSTn WLS_SOA1 Cluster SOA server 1, must be able to migrate between SOA server machines SOAHOST2VHN VIP3 Floating SOAHOST1-SOAHOSTn WLS_SOA2 Cluster SOA server 2, must be able to migrate between SOA server machines BAMHOST1 IP4 Fixed BAMHOST1 NodeManager Cluster BAMHOST1VHN VIP4 Floating BAMHOST1-BAMHOSTn WLS_BAM1 Cluster BAM server 1, must be able to migrate between BAM server machines BAMHOST2 IP3 Fixed BAMHOST2 NodeManager, WLS_BAM2 Cluster BAM server 2 does not require server migration WEBHOST1 IP5 Fixed WEBHOST1 OHS1 Cluster WEBHOST2 IP6 Fixed WEBHOST2 OHS2 Cluster soa.mycompany.com VIP5 Virtual LB LB Public External access point to SOA cluster. admin.mycompany.com VIP6 Virtual LB LB Internal Internal access to WLS console and EM soainternal.mycompany.com VIP7 Virtual LB LB Internal Internal access point to SOA cluster Floating IP addresses are IP addresses that may be re-assigned between machines in the cluster. For example in the event of failure of SOAHOST1 then WLS_SOA1 will need to be migrated to another server. In this case VIP2 (SOAHOST1VHN) will need to be activated on the new target machine. Once set up the node manager will manage registration and removal of the floating IP addresses with the exception of the AdminServer floating IP address. Note that if the BAMHOSTs and SOAHOSTs are the same machine then you can obviously share the hostname and fixed IP addresses, but you still need separate floating IP addresses for the different managed servers. The hostnames don’t have to be the ones given in the EDG, but they must be distinct in the same way as the ETC names are distinct. If the type is a fixed IP then if the addresses are the same you can use the same hostname, for example if you collapse the soahost1, bamhost1 and webhost1 onto a single machine then you could refer to them all as HOST1 and give them the same IP address, however SOAHOST1VHN can never be the same as BAMHOST1VHN because these are floating IP addresses. Notes on DNS IP addresses that are of scope “Cluster” just need to be in the hosts file (/etc/hosts on Linux, C:\Windows\System32\drivers\etc\hosts on Windows) of all the machines in the cluster and the load balancer. IP addresses that are of scope “Internal” need to be available on the internal DNS servers, whilst IP addresses of scope “Public” need to be available on external and internal DNS servers. Shared File System At a minimum the cluster needs shared storage for the domain configuration, XA transaction logs and JMS file stores. It is also possible to place the software itself on a shared server. I strongly recommend that all machines have the same file structure for their SOA installation otherwise you will experience pain! Section 2.3, "Shared Storage and Recommended Directory Structure", of the EDG covers the shared storage recommendations in detail. The following shorthand is used for locations: ORACLE_BASE is the root of the file system used for software and configuration files. MW_HOME is the location used by the installed SOA/BPM Suite installation. This is also used by the web server installation. In my installation it is set to <ORACLE_BASE>/SOA11gPS2. ORACLE_HOME is the location of the Oracle SOA components or the Oracle Web components. This directory is installed under the the MW_HOME but the name is decided by the user at installation, default values are Oracle_SOA1 and Oracle_Web1. In my installation they are set to <MW_HOME>/Oracle_SOA and <MW_HOME>/Oracle _WEB. ORACLE_COMMON_HOME is the location of the common components and is located under the MW_HOME directory. This is always <MW_HOME>/oracle_common. ORACLE_INSTANCE is used by the Oracle HTTP Server and/or Oracle Web Cache. It is recommended to create it under <ORACLE_BASE>/admin. In my installation they are set to <ORACLE_BASE>/admin/Web1, <ORACLE_BASE>/admin/Web2 and <ORACLE_BASE>/admin/WC1. WL_HOME is the WebLogic server home and is always found at <MW_HOME>/wlserver_10.3. Key file locations are shown below. Directory Notes <ORACLE_BASE>/admin/domain_name/aserver/domain_name Shared location for domain. Used to allow admin server to manually fail over between machines. When creating domain_name provide the aserver directory as the location for the domain. In my install this is <ORACLE_BASE>/admin/aserver/soa_domain as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/aserver/applications Shared location for deployed applications. Needs to be provided when creating the domain. In my install this is <ORACLE_BASE>/admin/aserver/applications as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/mserver/domain_name Either unique location for each machine or can be shared between machines to simplify task of packing and unpacking domain. This acts as the managed server configuration location. Keeping it separate from Admin server helps to avoid problems with the managed servers messing up the Admin Server. In my install this is <ORACLE_BASE>/admin/mserver/soa_domain as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/mserver/applications Either unique location for each machine or can be shared between machines. Holds deployed applications. In my install this is <ORACLE_BASE>/admin/mserver/applications as I only have one domain on the box. <ORACLE_BASE>/admin/domain_name/soa_cluster_name Shared directory to hold the following dd – deployment descriptors jms – shared JMS file stores fadapter – shared file adapter co-ordination files tlogs – shared transaction log files In my install this is <ORACLE_BASE>/admin/soa_cluster. <ORACLE_BASE>/admin/instance_name Local folder for web server (OHS) instance. In my install this is <ORACLE_BASE>/admin/web1 and <ORACLE_BASE>/admin/web2. I also have <ORACLE_BASE>/admin/wc1 for the Web Cache I use as a load balancer. <ORACLE_BASE>/product/fmw This can be a shared or local folder for the SOA/BPM Suite software. I used a shared location so I only ran the installer once. In my install this is <ORACLE_BASE>/SOA11gPS2 All the shared files need to be put onto a shared storage media. I am using NFS, but recommendation for production would be a SAN, with mirrored disks for resilience. Collapsing Environments To reduce the hardware requirements it is possible to collapse the BAMHOST, SOAHOST and WEBHOST machines onto a single physical machine. This will require more memory but memory is a lot cheaper than additional machines. For environments that require higher security then stay with a separate WEBHOST tier as per the EDG. Similarly for high volume environments then keep a separate set of machines for BAM and/or Web tier as per the EDG. Notes on Dev Environments In a dev environment it is acceptable to use a a single node (non-RAC) database, but be aware that the config of the data sources is different (no need to use multi-data source in WLS). Typically in a dev environment we will collapse the BAMHOST, SOAHOST and WEBHOST onto a single machine and use a software load balancer. To test a cluster properly we will need at least 2 machines. For my test environment I used Oracle Web Cache as a load balancer. I ran it on one of the SOA Suite machines and it load balanced across the Web Servers on both machines. This was easy for me to set up and I could administer it from a web based console.

Read the article

CodePlex Daily Summary for Sunday, March 13, 2011

CodePlex Daily Summary for Sunday, March 13, 2011Popular ReleasesImage.Viewer: 2011.2: Whats new for Image.Viewer 2011.2: New open from file New about dialog Minor Bug Fix's, improvements and speed upsIronPython: 2.7: On behalf of the IronPython team, I'm very pleased to announce the release of IronPython 2.7. This release contains all of the language features of Python 2.7, as well as several previously missing modules and numerous bug fixes. IronPython 2.7 also includes built-in Visual Studio support through IronPython Tools for Visual Studio. IronPython 2.7 requires .NET 4.0 or Silverlight 4. To download IronPython 2.7, visit http://ironpython.codeplex.com/releases/view/54498. Any bugs should be report...XML Explorer: XML Explorer 4.0.2: Changes in 4.0: This release is built on the Microsoft .NET Framework 4 Client Profile. Changed XSD validation to use the schema specified by the XML documents. Added a VS style Error List, double-clicking an error takes you to the offending node. XPathNavigator schema validation finally gives SourceObject (was fixed in .NET 4). Added Namespaces window and better support for XPath expressions in documents with a default namespace. Added ExpandAll and CollapseAll toolbar buttons (in a...Mobile Device Detection and Redirection: 1.0.0.0: Stable Release 51 Degrees.mobi Foundation has been in beta for some time now and has been used on thousands of websites worldwide. We’re now highly confident in the product and have designated this release as stable. We recommend all users update to this version. New Capabilities MappingsTo improve compatibility with other libraries some new .NET capabilities are now populated with wurfl data: “maximumRenderedPageSize” populated with “max_deck_size” “rendersBreaksAfterWmlAnchor” populated ...Composite C1 CMS: Composite C1 2.1 (2.1.4087.22991): Composite C1 is a fully featured pro open source CMS for quick/custom website creation. Modern architecture, very user friendly. Use wizards or HTML/CSS/XSLT/ASP.NET/LINQ/.NET4ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.3: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager added interactive search for the lookupWPF Inspector: WPF Inspector 0.9.7: New Features in Version 0.9.7 - Support for .NET 3.5 and 4.0 - Multi-inspection of the same process - Property-Filtering for multiple keywords e.g. "Height Width" - Smart Element Selection - Select Controls by clicking CTRL, - Select Template-Parts by clicking CTRL+SHIFT - Possibility to hide the element adorner (over the context menu on the visual tree) - Many bugfixes??????????: All-In-One Code Framework ??? 2011-03-10: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??，????。??????????All-In-One Code Framework ???，??20?Sample！！????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ASP.NET ??： CSASPNETBingMaps VBASPNETRemoteUploadAndDownload CS/VBASPNETSerializeJsonString CSASPNETIPtoLocation CSASPNETExcelLikeGridView ....... Winform??： FTPDownload FTPUpload MultiThreadedWebDownloader...Rawr: Rawr 4.1.0: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a Release of the WPF version, most of the general issues have been resolved. If you have a problem, please follow the Posting Guidelines and put it into the Issue Tracker. Whe...PHP Manager for IIS: PHP Manager 1.1.2 for IIS 7: This is a localization release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus a few bug fixes (see change list for more details). Most importantly this release is translated into five languages: German - the translation is provided by Christian Graefe Dutch - the translation is provided by Harrie Verveer Turkish - the translation is provided by Yusuf Oztürk Japanese - the translation is provided by Kenichi Wakasa Russian - the translation is provid...TweetSharp: TweetSharp v2.0.0: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Beta ChangesAdded user streams support Serialization is not attempted for Twitter 5xx errors Fixes based on feedback Third Party Library VersionsHammock v1.2.0: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comDirectQ: Release 1.8.7 (RC2): More fixes and improvements. Note for multiplayer - you may need to set r_waterwarp to 0 or 2 before connecting to a server, otherwise you will get a "Mod_PointInLeaf: bad model" error and not be able to connect. You can set it back to 1 after you connect, of course. This only came to light after releasing, and will be fixed in the next one.Microsoft All-In-One Code Framework - a centralized code sample library: Visual Studio 2008 Code Samples 2011-03-09: Code samples for Visual Studio 2008Office Web.UI: Version 2.4: After having lost all modifications done for 2.3. I finally did it again... Have a look at http://www.officewebui.com/change-log Also, the documentation continues to grow... http://www.officewebui.com/category/kb ThanksmyCollections: Version 1.3: New in version 1.3 : Added Editor management for Books Added Amazon API for Books Us, Fr, De Added Amazon Us, Fr, De for Movies Added The MovieDB for Fr and De Added Author for Books Added Editor and Platform for Games Added Amazon Us, De for Games Added Studio for XXX Added Background for XXX Bug fixing with Softonic API Bug fixing with IMDB UI improvement Removed GraceNote Added Amazon Us,Fr, De for Series Added TVDB Fr and De for Series Added Tracks for Musi...patterns & practices : Composite Services: Composite Services Guidance - CTP2: Overview The Composite Services guidance (codename Reykjavik) provides best practices and capabilities for applying industry-known SOA design patterns when building robust, connected, service-oriented composite enterprise applications. These capabilities are implemented as a set of reusable components for analytic tracing, service virtualization, metadata centralization and versioning, and policy centralization as well as exception management, included in this release. Changes in this CTP ...Python Tools for Visual Studio: 1.0 Beta 1: Beta 1You can't install IronPython Tools for Visual Studio side-by-side with Python Tools for Visual Studio. A race condition sometimes causes local MPI debugging to miss breakpoints. When MPI jobs on a cluster fail they don’t get cleaned up correctly, which can cause debugging to stall because the associated MPI job is stuck in the queue. The "Threads" view has a race condition which can cause it not to display properly at times. VS2010 shortcuts that are pinned to the taskbar are so...DotNetAge -a lightweight Mvc jQuery CMS: DotNetAge 2: What is new in DotNetAge 2.0 ? Completely update DJME to DJME2, enhance user experience ,more beautiful and more interactively visit DJME project home to lean more about DJME http://www.dotnetage.com/sites/home/djme.html A new widget engine has came! Faster and easiler. Runtime performance enhanced. SEO enhanced. UI Designer enhanced. A new web resources explorer. Page manager enhanced. BlogML supports added that allows you import/export your blog data to/from dotnetage publishi...Kooboo CMS: Kooboo CMS 3.0 Beta: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL,SQLCE, RavenDB and MongoDB. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder t...LINQ to Twitter: LINQ to Twitter Beta v2.0.20: Mono 2.8, Silverlight, OAuth, 100% Twitter API coverage, streaming, extensibility via Raw Queries, and added documentation.New ProjectsAxvius.Testing.NUnit: Provides fluent assertion methods for NUnit.Azure Conversion plugin for VS 2010: Azure Conversion Wizard is a plugin for VS 2010. The wizard converts your AZP.NET solutions for .NET 3.5 and higher to Windows Azure Platform. BlogSpam.net API: A simple C#.NET wrapper for the BlogSpam.net comment spam service.Bonyad Project Managing System: This is for managing bonyad projects.Camp Araminta: This project will be used to coordinate development efforts on the Camp Araminta website.code: This is demo summary ! Education Fellows Meta Service: Rebranded LaEMWS.Family Guide: This project is currently just for learning purposes. But it shall evolve to a fully functional solution later.HL7.NET: HL7.net groups all the neccessary code for managing HL7 standard. It makes it easy to add HL7 interoperability to your application. It is developed in C#.NETHyper-V Monitor Gadget: Hyper-V Monitor Gadget for Windows Sidebar that lists Hyper-V servers and their VM's. Supports status information and controlling them directly from the gadget.jp110311: Azure 312 ??????????? Azure ????????????????????????????????????????。Lugene: Index generation and distribution framework based on Lucene.net and index schemas provided by Lumen. Includes support for incremental updates of indexes, and a plugin framework for custom index providers.Planet Me: ...poc Dev: this is pco projectProcon 2: Procon Frostbite, rebuilt from the ground up.RandomNumbersGames: Small random numbers game which very helpful for people who want to develop their focusSistema Creeo: Sistema de Gestão de clínicasSPDiscussionBoard: SPDiscussionBoard started on 2005 while developing an ASP.NET forum and taking into consideration that I may use it on SharePoint in a day. Yesterday I remembered that, and started to alter it to run as a webpart inside SharePoint 2010, and it took about 4 hours to work.Video Commander: VideoCommander is an external control interface for vlc player. It enables the user to create play lists with start- and stop time and to play videos on a specified display. VideoCommander was especially developed for presenting videos on events like church services or theater.Windows Live Writer - Insert Tag Snippet Plugin: Insert Tag Snippet plugin is used to select a snippet from a collection of "user" defined snippets and insert it to the post. Prefix and suffix tags can also be defined. Especially useful for <code> and <pre> kind of tags. With Insert Tag Snippet plugin, you don't need to switch back to HTML view and than back to normal view again. The code is open for all communities' members to see how to develop a plugin for Windows Live Writer using C#.WMI Connection for ADO.NET: A lot of application have excellent support for ADO.NET connections. But many of them weren't desigend to work with WMI (Windows Management Instrumentation). This project puts them together, and adds the capability to access WMI data through the IDBConnection interface.Zugger: Zugger is an assistant application for those people who are using Zentao PMS. It provides the functions: 1. Your the counts of your bugs and tasks. 2. The lists of bugs and tasks. 3. Quick edit for bugs and tasks. 4. Notification of new bugs and tasks. It is developed in C# WPF

Read the article

CodePlex Daily Summary for Tuesday, March 01, 2011

CodePlex Daily Summary for Tuesday, March 01, 2011Popular ReleasesDirectQ: Release 1.8.7 (Beta 3): Fixes some problems and adds some more enhancements.Sandcastle Help File Builder: SHFB v1.9.2.0 Release: NOTE TO 32-BIT WINDOWS XP USERS: There is a problem with a type converter that fails on 32-bit Windows XP due to how it searches for the framework versions. I'll issue an update later today that fixes the issue. This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, ...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Ajax Minifier: Microsoft Ajax Minifier 4.13: New features: switches and settings for turning off Conditional Compilation comment processing; for adding variable and/or function names that should not be renamed automatically; for adding manual renaming of variables/functions/properties; for automatic evaluation of certain literal expressions (but not all).Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...SQL Server Compact Toolbox: Standalone version 2.0 for SQL Server Compact 4.0: Download the Visual Studio add-in for SQL Server Compact 4.0 and 3.5 from here Standalone version of (most of) the same functionality as the add-in, for SQL Server Compact 4.0. Useful for anyone not having Visual Studio Professional or higher installed. Requires .NET 4.0. Any feedback much appreciated.Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationspatterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.HERB.IQ: HERB.IQ.NEW.INSTALL.0.6.0.zip: HERB.IQ.NEW.INSTALL.0.6.0.zipCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...New ProjectsAssembly Explorer: Assembly Explorer is a developer utility that displays the namespaces, types, and members in an assembly. It also displays the MSIL or translated .NET language code.automated reporting system: ???????? ??????????? ?????????????? ???????????????? ????????? ?????? ?????????? ????????? Custom XSLT with Group by in Biztalk 2009: Custom XSLT with Group by in Biztalk 2009DotNet Repository: A simple to use, generic repository using Linq to SQL or Linq to Objects. euler 28: euler 28euler29: euler 29 problemFreeType for AirplaySDK: FreeType adoptation for Airplay SDK.Icicle Framework: An in-the-works component based game framework for XNA.Jogo dos Palitinhos: Jogo desenvolvido por alunos do 4º Ciclo Noturno de Programação do Curso de Análise de Sistemas e Tecnologia da Informação da Faculdade de Tecnologia de Carapicuíba. Este é o jogo dos palitinhos: uma mistura de lógica, advinhação e sorte. Será desenvolvido na plataforma Java.karmencita: Karmencita is a high level object query language for .NET . Its purpose is to allow easy querying from in memory structured data.Libero Site 011: libero sit 011MaLoRTLib: raytracer library used in the MaLoRT.MetroEdit: A WPF Text Editor based on the Metro UI Design Guidelines. Features: - Clean and simple UI based on Metro - 32bit and 64bit support - Tabbing - Syntax highlighting NOTE: Based on .NET Framework 4.0 and uses the following libraries: - MVVM Light Toolkit - AvalonEditMiaSocks: A .NET SOCKS Server Implementation base on SuperSocketmicroruntime: The MicroRuntime project is a .NET utility library.MVC Forum: A bulletin board system (like phpBB) running on ASP.NET MVC.newshehuishijianzhongxin: newshehuishijianzhongxinPrism Extension: Contains extensions for prism to reinforce some functionsRInterfaces: An interface to pass data toward and back from R and executing R code from .NETSharePoint 2007 Wiki Export: A very simple wiki export utility for SharePoint 2007. You can export a wiki library to the file system with the specified file extension, and wrapped in the speciified markup. Written in C#. The List service url is set dynamically so there is a dummy url in the configurations.Simon Squared: Simon Squared is a Multi-player Puzzle game for Windows Phone 7. It uses the XNA framework on the Phone, and the WCF Http CTP on the server side to handle communication between phones. It's written in C#.Sitefinity Toolkit: The Sitefinity Toolkit is a collection of enhancements to the Sitefinity Content Management System by Telerik. It currently supports Sitefinity version 3.7 (through SP4), and includes a number of tools to automate and simplify a number of actions and features.Slog: Slog is blog engine like Wordpress in Silverlight 4 that will have same fonctionality to bigin with and the same extensiblity thanks to MEF. Server side will be WCF DataServices, Entity Framework 4 and SQL Server Compact 4.SnagL: Social Network Analysis Graph Live (SnagL) is a light-weight, pluggable application that operates from a web browser and works with existing applications and back-end data stores to provide a visual way to understand information and enhance analysis.SocialShare Starter Kit: SocialShare Starter Kit is a web application that illustrate a wide range of features that needed to build a social site.This web application framework written in C# ASP.NET 4.0.Split Large XML file into small XML files: Split Large XML file into group of smaller XML files in sequential order. As posted to http://codeproject.com <a href='http://www.codeproject.com/KB/XML/SplitLargeXMLintoSmallFil.aspx'>Link</a>SSIS SSH Components: SSIS control flow tasks for SFTP and executing shell commands along with an SSH connection manager.StudioShell: StudioShell is a deeply integrated PowerShell module for Visual Studio 2010 and 2008. It will change the way you interact with your IDE and code by exposing the IDE extensibility features to PowerShell. What once took a binary can now be done in a one-liner.TBS: TBS TEZ BILGI SISTEMI tez bilgi sistemiuTestingService: uTestingService is a webservice with wrappers around Node and Document to allow for end-end testing of UmbracoWebsite Panel: Website Panel is a Windows application to help you manage multiple Dotnetnuke applications. Easy installations, backups & upgrades of DNN websites are just a few features of this application. Zinc: Zinc is a utility library for ASP.NET web forms development. It has support for: - utility methods for working easier with controls - CSV exports - HttpModules for dealing with caching and path based rights. - custom controls This library runs on .NET 2.0 and i would like to kee

Read the article

CodePlex Daily Summary for Wednesday, March 02, 2011

CodePlex Daily Summary for Wednesday, March 02, 2011Popular ReleasesDocument.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtVG Content Display Web Part: VG Content Display Web Part V1.0: Install package shall be installed using PowerShell or stsadm commands or using Central Administration interface. Please see instructions in the http://vgcdwp.codeplex.com/releases/view/61805#DownloadId=212622 file.DirectQ: Release 1.8.7 (Beta 3): Fixes some problems and adds some more enhancements.Sandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Ajax Minifier: Microsoft Ajax Minifier 4.13: New features: switches and settings for turning off Conditional Compilation comment processing; for adding variable and/or function names that should not be renamed automatically; for adding manual renaming of variables/functions/properties; for automatic evaluation of certain literal expressions (but not all).Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...SQL Server Compact Toolbox: Standalone version 2.0 for SQL Server Compact 4.0: Download the Visual Studio add-in for SQL Server Compact 4.0 and 3.5 from here Standalone version of (most of) the same functionality as the add-in, for SQL Server Compact 4.0. Useful for anyone not having Visual Studio Professional or higher installed. Requires .NET 4.0. Any feedback much appreciated.Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationspatterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.New ProjectsAndrea Angella Personal Repository: This is my personal code repository.Audipyme: Aplicación web para el análisis y gestión de riesgos basado en la norma ISO 27001.Backfire 4 Umbraco: An implementation of backfire to work with UmbracoBadminton: Source codeCarManagement: Car ManagementCEQuery: CEQuery is usefull for managing SQL Server CE databases. It is developed in C# and supports SQL Server CE 3.5 and 4.0.Circuit Diagram: Circuit Diagram enables you to make electronic circuit diagrams and allows them to be exported as images. Ideal for use in coursework, you no longer have to use image editing programs to paste components together.CodeI2iportal: fdfdfCycling waypoints for Windows Phone 7: Show cycling POI on the Windows Phone 7d3d test: no summarydaemoniq - windows service hosting for mere mortals: Daemoniq provides a layer of a abstraction on top of System.ServiceProcess. This allows developers to concentrate on the functionality of their windows services in .Net by providing functionality such as configuration, deployment and debuggability.DimMock: DimMock is an object mocking framework for .NET Framework 4.0 that enables developers to mock simple and mildly complex classes extremely quick. euler 11: euler 11 problemeuler 30: euler 30euler 36 problem: euler 36 problemFiverw: Fiverw with ASP.NETGameList Creator for Wario's Jewel (GameBoy emulator for Windows Phone 7): Cette application vous permet de créer un catalogue de jeux vidéo pour des émulateurs mobiles et notamment Wario's Jewels, un emulateur GameBoy pour WP7. This application make it easier to create a game list for mobile emulators like Wario's Jewels, an WP7 GameBoy emulator.Gestion no Conformes: Gestión de No ConformesIamV Silverlight player: SilverLight photo album and music playerIcon Manager for Umbraco: Icon Manager for Umbraco - manage the icons within the setting secion of Umbraco by adding / removing from an available icon poolIE9 Extensions 4 Umbraco: A set of IE 9 extensions for Umbracoie9ify: A jQuery Plugin for adding IE9 features (site pinning, site mode, etc.) to your websitesImgUR.NET: ImgUr.NET helps the new .NET programmer host images on ImgUr. Developed in Visual Basic 2010, it can be used using only one line of code! You don't even need to parse the XML, ImgUr.NET automagically extract the URL and gives it to you! You can also get raw XML to parse yourself.Markup Programmability: Markup Programmability extends Blend Interactivity to a full programming language in markup: control flow, expressions, functions, objects, commands, converters, events, and more. Write an MVVM prototype in markup-only or use it for enhanced interactivity.MSCRM 4.0 Appointment Reminders (popup application without needing Outlook!): MSCRM 4.0 Appointment Reminders (popup application without Outlook!). Want to have your CRM Appointments popup on your desktop but don't have Outlook? Frustated by the CRM connection always going down and disconnecting itself? Built for local network use.myAspPracticals: my Asp.net pacticals-practical2NickMaoMix: It is only a sample project in Spring.Net + NHibernate + ASP.NET MVCOrchard Content Permissions: Orchard module enabling users to permit access to specified content items.Orchard LatestTwitter Module: Display latest Tweets for a user in an Orchard widget.PDF Little Signer: PDF Little Signer is a .NET3.5 library for self signing PDF document. It's very easy to use. It uses iTextSharp.perolas: perolasPGeom2D: PGeom2D is an attempt to derive the project http://livegeometry.codeplex.com/ as a more CAD oriented / desktop application. - it should use GDI+ instead of silverlight / WPF. - it should provide layers and blocks features. - it should support more export/import formats.Practical4: This is my practical4 webApplicationQxado: A .net framework written by BillQianReactive Extensions (Rx) Koans: Use this VS2010 project to learn Reactive (Rx) by doing small hacks in prepared lessons. Koans are a great way to get started learning Rx. Included Topics are: Observable Streams Time Events Aggregations Subscriptions RegularPractice: It is a project where i can upload my own prectice and demo projects of asp.net .RSVP04: RSVP systemschool project: Studiegids Projectshowyourfrustration: This web site is made for fun and enjoy over the internat.Silverlight Classified Cabinet: The Silverlight Classified Cabinet is a component that makes it easier to show classified items in a nice way. With the power of Silverlight, it lets users zoom and drag the items, categorize them into shelves and see detailed view. SkilledRESKAT: This Module helps SKilledRES for Automating Student Knowledge AssessmentTera X Emulator: Tera Emulator based on C#Test Tasks: Collection of completed test exercises.VG Content Display Web Part: VG Content Display Web Part is an alternative to Content Query Web Part (CQWP). It is easy to set up, uses custom XSLT file and it works with SharePoint 2010 Foundation. It allows displaying context-related content using current page metadata as filter values.vkPlayer: The standalone player for VKontakte siteWarMap Downloader: Easy way for download Warcraft 3 maps, from popular epicwar.com server. Hope you Enjoy!Web Crawler Sample: Simple solution that shows how NUnit, RhinoMock, Unity 2.0 DI container, and Parallel Extensions can play together. It is not considered as a best practice but rather aims to serve as a quick start solution.WP7Clipboard: WP7Clipboard is a library to mimic a shared clipboard on Windows Phone 7. This enables the user to copy objects from one application and post them into another without having to use a webservice/etc.????????? ?????????: "????????? ?????????" - ??? ???????, ??????????????? ????? ??????????????? ??????? ??? ??????? ??????? ????????????. ????????? ???????? ??? ?????? ? ????? ??????????? ??????? ??????? ?? ?????????? ????? ???.

Search Results

Search found 63114 results on 2525 pages for 'set identity insert'.

Page 413/2525 | < Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420 | Next Page >

- by DanM

- by john White

- by user1308560

- by mekka

- by Rick Strahl

- by Rick Strahl

- by srkirkland

- by Anthony Shorten

- by doug123

- by Matthew Guay

- by FransBouma

- by hajan

- by Kevin Shyr

- by pinaldave

- by OWScott

- by Kelly Jones

- by imran_ku07

- by nmarun

- by ScottGu

- by pinaldave

- by sqlworkshops

- by antony.reynolds

< Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420 | Next Page >