Search Results

Search found 11020 results on 441 pages for 'pass summit'.

Page 419/441 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

• How to configure VPN in Windows XP

  - by SAMIR BHOGAYTA

  VPN Overview A VPN is a private network created over a public one. It’s done with encryption, this way, your data is encapsulated and secure in transit – this creates the ‘virtual’ tunnel. A VPN is a method of connecting to a private network by a public network like the Internet. An internet connection in a company is common. An Internet connection in a Home is common too. With both of these, you could create an encrypted tunnel between them and pass traffic, safely - securely. If you want to create a VPN connection you will have to use encryption to make sure that others cannot intercept the data in transit while traversing the Internet. Windows XP provides a certain level of security by using Point-to-Point Tunneling Protocol (PPTP) or Layer Two Tunneling Protocol (L2TP). They are both considered tunneling protocols – simply because they create that virtual tunnel just discussed, by applying encryption. Configure a VPN with XP If you want to configure a VPN connection from a Windows XP client computer you only need what comes with the Operating System itself, it's all built right in. To set up a connection to a VPN, do the following: 1. On the computer that is running Windows XP, confirm that the connection to the Internet is correctly configured. • You can try to browse the internet • Ping a known host on the Internet, like yahoo.com, something that isn’t blocking ICMP 2. Click Start, and then click Control Panel. 3. In Control Panel, double click Network Connections 4. Click Create a new connection in the Network Tasks task pad 5. In the Network Connection Wizard, click Next. 6. Click Connect to the network at my workplace, and then click Next. 7. Click Virtual Private Network connection, and then click Next. 8. If you are prompted, you need to select whether you will use a dialup connection or if you have a dedicated connection to the Internet either via Cable, DSL, T1, Satellite, etc. Click Next. 9. Type a host name, IP or any other description you would like to appear in the Network Connections area. You can change this later if you want. Click Next. 10. Type the host name or the Internet Protocol (IP) address of the computer that you want to connect to, and then click Next. 11. You may be asked if you want to use a Smart Card or not. 12. You are just about done, the rest of the screens just verify your connection, click Next. 13. Click to select the Add a shortcut to this connection to my desktop check box if you want one, if not, then leave it unchecked and click finish. 14. You are now done making your connection, but by default, it may try to connect. You can either try the connection now if you know its valid, if not, then just close it down for now. 15. In the Network Connections window, right-click the new connection and select properties. Let’s take a look at how you can customize this connection before it’s used. 16. The first tab you will see if the General Tab. This only covers the name of the connection, which you can also rename from the Network Connection dialog box by right clicking the connection and selecting to rename it. You can also configure a First connect, which means that Windows can connect the public network (like the Internet) before starting to attempt the ‘VPN’ connection. This is a perfect example as to when you would have configured the dialup connection; this would have been the first thing that you would have to do. It's simple, you have to be connected to the Internet first before you can encrypt and send data over it. This setting makes sure that this is a reality for you. 17. The next tab is the Options Tab. It is The Options tab has a lot you can configure in it. For one, you have the option to connect to a Windows Domain, if you select this check box (unchecked by default), then your VPN client will request Windows logon domain information while starting to work up the VPN connection. Also, you have options here for redialing. Redial attempts are configured here if you are using a dial up connection to get to the Internet. It is very handy to redial if the line is dropped as dropped lines are very common. 18. The next tab is the Security Tab. This is where you would configure basic security for the VPN client. This is where you would set any advanced IPSec configurations other security protocols as well as requiring encryption and credentials. 19. The next tab is the Networking Tab. This is where you can select what networking items are used by this VPN connection. 20. The Last tab is the Advanced Tab. This is where you can configure options for configuring a firewall, and/or sharing. Connecting to Corporate Now that you have your XP VPN client all set up and ready, the next step is to attempt a connection to the Remote Access or VPN server set up at the corporate office. To use the connection follow these simple steps. To open the client again, go back to the Network Connections dialog box. 1. One you are in the Network Connection dialog box, double-click, or right click and select ‘Connect’ from the menu – this will initiate the connection to the corporate office. 2. Type your user name and password, and then click Connect. Properties bring you back to what we just discussed in this article, all the global settings for the VPN client you are using. 3. To disconnect from a VPN connection, right-click the icon for the connection, and then click “Disconnect” Summary In this article we covered the basics of building a VPN connection using Windows XP. This is very handy when you have a VPN device but don’t have the ‘client’ that may come with it. If the VPN Server doesn’t use highly proprietary protocols, then you can use the XP client to connect with. In a future article I will get into the nuts and bolts of both IPSec and more detail on how to configure the advanced options in the Security tab of this client. 678: The remote computer did not respond. 930: The authentication server did not respond to authentication requests in a timely fashion. 800: Unable to establish the VPN connection. 623: The system could not find the phone book entry for this connection. 720: A connection to the remote computer could not be established. More on : http://www.windowsecurity.com/articles/Configure-VPN-Connection-Windows-XP.html

  Read the article

• C#/.NET Little Wonders: The Timeout static class

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. When I started the “Little Wonders” series, I really wanted to pay homage to parts of the .NET Framework that are often small but can help in big ways.  The item I have to discuss today really is a very small item in the .NET BCL, but once again I feel it can help make the intention of code much clearer and thus is worthy of note. The Problem - Magic numbers aren’t very readable or maintainable In my first Little Wonders Post (Five Little Wonders That Make Code Better) I mention the TimeSpan factory methods which, I feel, really help the readability of constructed TimeSpan instances. Just to quickly recap that discussion, ask yourself what the TimeSpan specified in each case below is 1: // Five minutes? Five Seconds? 2: var fiveWhat1 = new TimeSpan(0, 0, 5); 3: var fiveWhat2 = new TimeSpan(0, 0, 5, 0); 4: var fiveWhat3 = new TimeSpan(0, 0, 5, 0, 0); You’d think they’d all be the same unit of time, right?  After all, most overloads tend to tack additional arguments on the end.  But this is not the case with TimeSpan, where the constructor forms are:     TimeSpan(int hours, int minutes, int seconds);     TimeSpan(int days, int hours, int minutes, int seconds);     TimeSpan(int days, int hours, int minutes, int seconds, int milliseconds); Notice how in the 4 and 5 parameter version we suddenly have the parameter days slipping in front of hours?  This can make reading constructors like those above much harder.  Fortunately, there are TimeSpan factory methods to help make your intention crystal clear: 1: // Ah! Much clearer! 2: var fiveSeconds = TimeSpan.FromSeconds(5); These are great because they remove all ambiguity from the reader!  So in short, magic numbers in constructors and methods can be ambiguous, and anything we can do to clean up the intention of the developer will make the code much easier to read and maintain. Timeout – Readable identifiers for infinite timeout values In a similar way to TimeSpan, let’s consider specifying timeouts for some of .NET’s (or our own) many methods that allow you to specify timeout periods. For example, in the TPL Task class, there is a family of Wait() methods that can take TimeSpan or int for timeouts.  Typically, if you want to specify an infinite timeout, you’d just call the version that doesn’t take a timeout parameter at all: 1: myTask.Wait(); // infinite wait But there are versions that take the int or TimeSpan for timeout as well: 1: // Wait for 100 ms 2: myTask.Wait(100); 3:  4: // Wait for 5 seconds 5: myTask.Wait(TimeSpan.FromSeconds(5); Now, if we want to specify an infinite timeout to wait on the Task, we could pass –1 (or a TimeSpan set to –1 ms), which what the .NET BCL methods with timeouts use to represent an infinite timeout: 1: // Also infinite timeouts, but harder to read/maintain 2: myTask.Wait(-1); 3: myTask.Wait(TimeSpan.FromMilliseconds(-1)); However, these are not as readable or maintainable.  If you were writing this code, you might make the mistake of thinking 0 or int.MaxValue was an infinite timeout, and you’d be incorrect.  Also, reading the code above it isn’t as clear that –1 is infinite unless you happen to know that is the specified behavior. To make the code like this easier to read and maintain, there is a static class called Timeout in the System.Threading namespace which contains definition for infinite timeouts specified as both int and TimeSpan forms: Timeout.Infinite An integer constant with a value of –1 Timeout.InfiniteTimeSpan A static readonly TimeSpan which represents –1 ms (only available in .NET 4.5+) This makes our calls to Task.Wait() (or any other calls with timeouts) much more clear: 1: // intention to wait indefinitely is quite clear now 2: myTask.Wait(Timeout.Infinite); 3: myTask.Wait(Timeout.InfiniteTimeSpan); But wait, you may say, why would we care at all?  Why not use the version of Wait() that takes no arguments?  Good question!  When you’re directly calling the method with an infinite timeout that’s what you’d most likely do, but what if you are just passing along a timeout specified by a caller from higher up?  Or perhaps storing a timeout value from a configuration file, and want to default it to infinite? For example, perhaps you are designing a communications module and want to be able to shutdown gracefully, but if you can’t gracefully finish in a specified amount of time you want to force the connection closed.  You could create a Shutdown() method in your class, and take a TimeSpan or an int for the amount of time to wait for a clean shutdown – perhaps waiting for client to acknowledge – before terminating the connection.  So, assume we had a pub/sub system with a class to broadcast messages: 1: // Some class to broadcast messages to connected clients 2: public class Broadcaster 3: { 4: // ... 5:  6: // Shutdown connection to clients, wait for ack back from clients 7: // until all acks received or timeout, whichever happens first 8: public void Shutdown(int timeout) 9: { 10: // Kick off a task here to send shutdown request to clients and wait 11: // for the task to finish below for the specified time... 12:  13: if (!shutdownTask.Wait(timeout)) 14: { 15: // If Wait() returns false, we timed out and task 16: // did not join in time. 17: } 18: } 19: } We could even add an overload to allow us to use TimeSpan instead of int, to give our callers the flexibility to specify timeouts either way: 1: // overload to allow them to specify Timeout in TimeSpan, would 2: // just call the int version passing in the TotalMilliseconds... 3: public void Shutdown(TimeSpan timeout) 4: { 5: Shutdown(timeout.TotalMilliseconds); 6: } Notice in case of this class, we don’t assume the caller wants infinite timeouts, we choose to rely on them to tell us how long to wait.  So now, if they choose an infinite timeout, they could use the –1, which is more cryptic, or use Timeout class to make the intention clear: 1: // shutdown the broadcaster, waiting until all clients ack back 2: // without timing out. 3: myBroadcaster.Shutdown(Timeout.Infinite); We could even add a default argument using the int parameter version so that specifying no arguments to Shutdown() assumes an infinite timeout: 1: // Modified original Shutdown() method to add a default of 2: // Timeout.Infinite, works because Timeout.Infinite is a compile 3: // time constant. 4: public void Shutdown(int timeout = Timeout.Infinite) 5: { 6: // same code as before 7: } Note that you can’t default the ShutDown(TimeSpan) overload with Timeout.InfiniteTimeSpan since it is not a compile-time constant.  The only acceptable default for a TimeSpan parameter would be default(TimeSpan) which is zero milliseconds, which specified no wait, not infinite wait. Summary While Timeout.Infinite and Timeout.InfiniteTimeSpan are not earth-shattering classes in terms of functionality, they do give you very handy and readable constant values that you can use in your programs to help increase readability and maintainability when specifying infinite timeouts for various timeouts in the BCL and your own applications. Technorati Tags: C#,CSharp,.NET,Little Wonders,Timeout,Task

  Read the article

• Lessons from rewriting POP Forums for MVC, open source-like

  - by Jeff

  It has been a ton of work, interrupted over the last two years by unemployment, moving, a baby, failing to sell houses and other life events, but it's really exciting to see POP Forums v9 coming together. I'm not even sure when I decided to really commit to it as an open source project, but working on the same team as the CodePlex folks probably had something to do with it. Moving along the roadmap I set for myself, the app is now running on a quasi-production site... we launched MouseZoom last weekend. (That's a post-beta 1 build of the forum. There's also some nifty Silverlight DeepZoom goodness on that site.)I have to make a point to illustrate just how important starting over was for me. I started this forum thing for my sites in old ASP more than ten years ago. What a mess that stuff was, including SQL injection vulnerabilities and all kinds of crap. It went to ASP.NET in 2002, but even then, it felt a little too much like script. More than a year later, in 2003, I did an honest to goodness rewrite. If you've been in this business of writing code for any amount of time, you know how much you hate what you wrote a month ago, so just imagine that with seven years in between. The subsequent versions still carried a fair amount of crap, and that's why I had to start over, to make a clean break. Mind you, much of that crap is still running on some of my production sites in a stable manner, but it's a pain in the ass to maintain.So with that clean break, there is much that I have learned. These are a few of those lessons, in no particular order...Avoid shiny object syndromeOver the years, I've embraced new things without bothering to ask myself why. I remember spending the better part of a year trying to adapt this app to use the membership and profile API's in ASP.NET, just because they were there. They didn't solve any known problem. Early on in this version, I dabbled in exotic ORM's, even though I already had the fundamental SQL that I knew worked. I bloated up the client side code with all kinds of jQuery UI and plugins just because, and it got in the way. All the new shiny can be distracting, and I've come to realize that I've allowed it to be a distraction most of my professional life.Just query what you needI've spent a lot of time over-thinking how to query data. In the SQL world, this means exotic joins, special caches, the read-update-commit loop of ORM's, etc. There are times when you have to remind yourself that you aren't Facebook, you'll never be Facebook, and that databases are in fact intended to serve data. In a lot of projects, back in the day, I used to have these big, rich data objects and pass them all over the place, through various application tiers, when in reality, all I needed was some ID from the entity. I try to be mindful of how many queries hit the database on a given request, but I don't obsess over it. I just get what I need.Don't spend too much time worrying about your unit testsIf you've looked at any of the tests for POP Forums, you might offer an audible WTF. That's OK. There's a whole lot of mocking going on. In some cases, it points out where you're doing too much, and that's good for improving your design. In other cases it shows where your design sucks. But the biggest trap of unit testing is that you worry it should be prettier. That's a waste of time. When you write a test, in many cases before the production code, the important part is that you're testing the right thing. If you have to mock up a bunch of stuff to test the outcome, so be it, but it's not wasted time. You're still doing up the typical arrange-action-assert deal, and you'll be able to read that later if you need to.Get back to your HTTP rootsASP.NET Webforms did a reasonably decent job at abstracting us away from the stateless nature of the Web. A lot of people criticize it, but I think it all worked pretty well. These days, with MVC, jQuery, REST services, and what not, we've gone back to thinking about the wire. The nuts and bolts passing between our Web browser and server matters. This doesn't make things harder, in my opinion, it makes them easier. There is something incredibly freeing about how we approach development of Web apps now. HTTP is a really simple protocol, and the stuff we push through it, in particular HTML and JSON, are pretty simple too. The debugging points are really easy to trap and trace.Premature optimization is prematureI'll go back to the data thing for a moment. I've been known to look at a particular action or use case and stress about the number of calls that are made to the database. I'm not suggesting that it's a bad thing to keep these in mind, but if you worry about it outside of the context of the actual impact, you're wasting time. For example, I query the database for last read times in a forum separately of the user and the list of forums. The impact on performance barely exists. If I put it under load, exceeding the kind of load I expect, it still barely has an impact. Then consider it only counts for logged in users. The context of this "inefficient" action is that it doesn't matter. Did I mention I won't be Facebook?Solve your own problems firstThis is another trap I've fallen into. I've often thought about what other people might need for some feature or aspect of the app. In other words, I was willing to make design decisions based on non-existent data. How stupid is that? When I decided to truly open source this thing, building for myself first was a stated design goal. This app has to server the audiences of CoasterBuzz, MouseZoom and other sites first. In this development scenario, you don't have access to mountains of usability studies or user focus groups. You have to start with what you know.I'm sure there are other points I could make too. It has been a lot of fun to work on, and I look forward to evolving the UI as time goes on. That's where I hope to see more magic in the future.

  Read the article

• Accessing SharePoint 2010 Data with REST/OData on Windows Phone 7

  - by Jan Tielens

  Consuming SharePoint 2010 data in Windows Phone 7 applications using the CTP version of the developer tools is quite a challenge. The issue is that the SharePoint 2010 data is not anonymously available; users need to authenticate to be able to access the data. When I first tried to access SharePoint 2010 data from my first Hello-World-type Windows Phone 7 application I thought “Hey, this should be easy!” because Windows Phone 7 development based on Silverlight and SharePoint 2010 has a Client Object Model for Silverlight. Unfortunately you can’t use the Client Object Model of SharePoint 2010 on the Windows Phone platform; there’s a reference to an assembly that’s not available (System.Windows.Browser). My second thought was “OK, no problem!” because SharePoint 2010 also exposes a REST/OData API to access SharePoint data. Using the REST API in SharePoint 2010 is as easy as making a web request for a URL (in which you specify the data you’d like to retrieve), e.g. http://yoursiteurl/_vti_bin/listdata.svc/Announcements. This is very easy to accomplish in a Silverlight application that’s running in the context of a page in a SharePoint site, because the credentials of the currently logged on user are automatically picked up and passed to the WCF service. But a Windows Phone application is of course running outside of the SharePoint site’s page, so the application should build credentials that have to be passed to SharePoint’s WCF service. This turns out to be a small challenge in Silverlight 3, the WebClient doesn’t support authentication; there is a Credentials property but when you set it and make the request you get a NotImplementedException exception. Probably this issued will be solved in the very near future, since Silverlight 4 does support authentication, and there’s already a WCF Data Services download that uses this new platform feature of Silverlight 4. So when Windows Phone platform switches to Silverlight 4, you can just use the WebClient to get the data. Even more, if the OData Client Library for Windows Phone 7 gets updated after that, things should get even easier! By the way: the things I’m writing in this paragraph are just assumptions that I make which make a lot of sense IMHO, I don’t have any info all of this will happen, but I really hope so. So are SharePoint developers out of the Windows Phone development game until they get this fixed? Well luckily not, when the HttpWebRequest class is being used instead, you can pass credentials! Using the HttpWebRequest class is slightly more complex than using the WebClient class, but the end result is that you have access to your precious SharePoint 2010 data. The following code snippet is getting all the announcements of an Annoucements list in a SharePoint site: HttpWebRequest webReq =     (HttpWebRequest)HttpWebRequest.Create("http://yoursite/_vti_bin/listdata.svc/Announcements");webReq.Credentials = new NetworkCredential("username", "password"); webReq.BeginGetResponse(    (result) => {        HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState;         XDocument xdoc = XDocument.Load(            ((HttpWebResponse)asyncReq.EndGetResponse(result)).GetResponseStream());         XNamespace ns = "http://www.w3.org/2005/Atom";        var items = from item in xdoc.Root.Elements(ns + "entry")                    select new { Title = item.Element(ns + "title").Value };         this.Dispatcher.BeginInvoke(() =>        {            foreach (var item in items)                MessageBox.Show(item.Title);        });    }, webReq); When you try this in a Windows Phone 7 application, make sure you add a reference to the System.Xml.Linq assembly, because the code uses Linq to XML to parse the resulting Atom feed, so the Title of every announcement is being displayed in a MessageBox. Check out my previous post if you’d like to see a more polished sample Windows Phone 7 application that displays SharePoint 2010 data.When you plan to use this technique, it’s of course a good idea to encapsulate the code doing the request, so it becomes really easy to get the data that you need. In the following code snippet you can find the GetAtomFeed method that gets the contents of any Atom feed, even if you need to authenticate to get access to the feed. delegate void GetAtomFeedCallback(Stream responseStream); public MainPage(){    InitializeComponent();     SupportedOrientations = SupportedPageOrientation.Portrait |         SupportedPageOrientation.Landscape;     string url = "http://yoursite/_vti_bin/listdata.svc/Announcements";    string username = "username";    string password = "password";    string domain = "";     GetAtomFeed(url, username, password, domain, (s) =>    {        XNamespace ns = "http://www.w3.org/2005/Atom";        XDocument xdoc = XDocument.Load(s);         var items = from item in xdoc.Root.Elements(ns + "entry")                    select new { Title = item.Element(ns + "title").Value };         this.Dispatcher.BeginInvoke(() =>        {            foreach (var item in items)            {                MessageBox.Show(item.Title);            }        });    });} private static void GetAtomFeed(string url, string username,     string password, string domain, GetAtomFeedCallback cb){    HttpWebRequest webReq = (HttpWebRequest)HttpWebRequest.Create(url);    webReq.Credentials = new NetworkCredential(username, password, domain);     webReq.BeginGetResponse(        (result) =>        {            HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState;            HttpWebResponse resp = (HttpWebResponse)asyncReq.EndGetResponse(result);            cb(resp.GetResponseStream());        }, webReq);}

  Read the article

• C#: Does an IDisposable in a Halted Iterator Dispose?

  - by James Michael Hare

  If that sounds confusing, let me give you an example. Let's say you expose a method to read a database of products, and instead of returning a List<Product> you return an IEnumerable<Product> in iterator form (yield return). This accomplishes several good things: The IDataReader is not passed out of the Data Access Layer which prevents abstraction leak and resource leak potentials. You don't need to construct a full List<Product> in memory (which could be very big) if you just want to forward iterate once. If you only want to consume up to a certain point in the list, you won't incur the database cost of looking up the other items. This could give us an example like: 1: // a sample data access object class to do standard CRUD operations. 2: public class ProductDao 3: { 4: private DbProviderFactory _factory = SqlClientFactory.Instance 5:  6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: // must create the connection 10: using (var con = _factory.CreateConnection()) 11: { 12: con.ConnectionString = _productsConnectionString; 13: con.Open(); 14:  15: // create the command 16: using (var cmd = _factory.CreateCommand()) 17: { 18: cmd.Connection = con; 19: cmd.CommandText = _getAllProductsStoredProc; 20: cmd.CommandType = CommandType.StoredProcedure; 21:  22: // get a reader and pass back all results 23: using (var reader = cmd.ExecuteReader()) 24: { 25: while(reader.Read()) 26: { 27: yield return new Product 28: { 29: Name = reader["product_name"].ToString(), 30: ... 31: }; 32: } 33: } 34: } 35: } 36: } 37: } The database details themselves are irrelevant. I will say, though, that I'm a big fan of using the System.Data.Common classes instead of your provider specific counterparts directly (SqlCommand, OracleCommand, etc). This lets you mock your data sources easily in unit testing and also allows you to swap out your provider in one line of code. In fact, one of the shared components I'm most proud of implementing was our group's DatabaseUtility library that simplifies all the database access above into one line of code in a thread-safe and provider-neutral way. I went with my own flavor instead of the EL due to the fact I didn't want to force internal company consumers to use the EL if they didn't want to, and it made it easy to allow them to mock their database for unit testing by providing a MockCommand, MockConnection, etc that followed the System.Data.Common model. One of these days I'll blog on that if anyone's interested. Regardless, you often have situations like the above where you are consuming and iterating through a resource that must be closed once you are finished iterating. For the reasons stated above, I didn't want to return IDataReader (that would force them to remember to Dispose it), and I didn't want to return List<Product> (that would force them to hold all products in memory) -- but the first time I wrote this, I was worried. What if you never consume the last item and exit the loop? Are the reader, command, and connection all disposed correctly? Of course, I was 99.999999% sure the creators of C# had already thought of this and taken care of it, but inspection in Reflector was difficult due to the nature of the state machines yield return generates, so I decided to try a quick example program to verify whether or not Dispose() will be called when an iterator is broken from outside the iterator itself -- i.e. before the iterator reports there are no more items. So I wrote a quick Sequencer class with a Dispose() method and an iterator for it. Yes, it is COMPLETELY contrived: 1: // A disposable sequence of int -- yes this is completely contrived... 2: internal class Sequencer : IDisposable 3: { 4: private int _i = 0; 5: private readonly object _mutex = new object(); 6:  7: // Constructs an int sequence. 8: public Sequencer(int start) 9: { 10: _i = start; 11: } 12:  13: // Gets the next integer 14: public int GetNext() 15: { 16: lock (_mutex) 17: { 18: return _i++; 19: } 20: } 21:  22: // Dispose the sequence of integers. 23: public void Dispose() 24: { 25: // force output immediately (flush the buffer) 26: Console.WriteLine("Disposed with last sequence number of {0}!", _i); 27: Console.Out.Flush(); 28: } 29: } And then I created a generator (infinite-loop iterator) that did the using block for auto-Disposal: 1: // simply defines an extension method off of an int to start a sequence 2: public static class SequencerExtensions 3: { 4: // generates an infinite sequence starting at the specified number 5: public static IEnumerable<int> GetSequence(this int starter) 6: { 7: // note the using here, will call Dispose() when block terminated. 8: using (var seq = new Sequencer(starter)) 9: { 10: // infinite loop on this generator, means must be bounded by caller! 11: while(true) 12: { 13: yield return seq.GetNext(); 14: } 15: } 16: } 17: } This is really the same conundrum as the database problem originally posed. Here we are using iteration (yield return) over a large collection (infinite sequence of integers). If we cut the sequence short by breaking iteration, will that using block exit and hence, Dispose be called? Well, let's see: 1: // The test program class 2: public class IteratorTest 3: { 4: // The main test method. 5: public static void Main() 6: { 7: Console.WriteLine("Going to consume 10 of infinite items"); 8: Console.Out.Flush(); 9:  10: foreach(var i in 0.GetSequence()) 11: { 12: // could use TakeWhile, but wanted to output right at break... 13: if(i >= 10) 14: { 15: Console.WriteLine("Breaking now!"); 16: Console.Out.Flush(); 17: break; 18: } 19:  20: Console.WriteLine(i); 21: Console.Out.Flush(); 22: } 23:  24: Console.WriteLine("Done with loop."); 25: Console.Out.Flush(); 26: } 27: } So, what do we see? Do we see the "Disposed" message from our dispose, or did the Dispose get skipped because from an "eyeball" perspective we should be locked in that infinite generator loop? Here's the results: 1: Going to consume 10 of infinite items 2: 0 3: 1 4: 2 5: 3 6: 4 7: 5 8: 6 9: 7 10: 8 11: 9 12: Breaking now! 13: Disposed with last sequence number of 11! 14: Done with loop. Yes indeed, when we break the loop, the state machine that C# generates for yield iterate exits the iteration through the using blocks and auto-disposes the IDisposable correctly. I must admit, though, the first time I wrote one, I began to wonder and that led to this test. If you've never seen iterators before (I wrote a previous entry here) the infinite loop may throw you, but you have to keep in mind it is not a linear piece of code, that every time you hit a "yield return" it cedes control back to the state machine generated for the iterator. And this state machine, I'm happy to say, is smart enough to clean up the using blocks correctly. I suspected those wily guys and gals at Microsoft engineered it well, and I wasn't disappointed. But, I've been bitten by assumptions before, so it's good to test and see. Yes, maybe you knew it would or figured it would, but isn't it nice to know? And as those campy 80s G.I. Joe cartoon public service reminders always taught us, "Knowing is half the battle...". Technorati Tags: C#,.NET

  Read the article

• ASP.NET MVC JavaScript Routing

  - by zowens

  Have you ever done this sort of thing in your ASP.NET MVC view? The weird thing about this isn’t the alert function, it’s the code block containing the Url formation using the ASP.NET MVC UrlHelper. The terrible thing about this experience is the obvious lack of IntelliSense and this ugly inline JavaScript code. Inline JavaScript isn’t portable to other pages beyond the current page of execution. It is generally considered bad practice to use inline JavaScript in your public-facing pages. How ludicrous would it be to copy and paste the entire jQuery code base into your pages…? Not something you’d ever consider doing. The problem is that your URLs have to be generated by ASP.NET at runtime and really can’t be copied to your JavaScript code without some trickery. How about this? Does the hard-coded URL bother you? It really bothers me. The typical solution to this whole routing in JavaScript issue is to just hard-code your URLs into your JavaScript files and call it done. But what if your URLs change? You have to now go an track down the places in JavaScript and manually replace them. What if you get the pattern wrong? Do you have tests around it? This isn’t something you should have to worry about.   The Solution To Our Problems The solution is to port routing over to JavaScript. Does that sound daunting to you? It’s actually not very hard, but I decided to create my own generator that will do all the work for you. What I have created is a very basic port of the route formation feature of ASP.NET routing. It will generate the formatted URLs based on your routing patterns. Here’s how you’d do this: Does that feel familiar? It looks a lot like something you’d do inside of your ASP.NET MVC views… but this is inside of a JavaScript file… just a plain ol’ .js file.  Your first question might be why do you have to have that “.toUrl()” thing. The reason is that I wanted to make POST and GET requests dead simple. Here’s how you’d do a POST request (and the same would work with a GET request):   The first parameter is extra data passed to the post request and the second parameter is a function that handles the success of the POST request. If you’re familiar with jQuery’s Ajax goodness, you’ll know how to use it. (if not, check out http://api.jquery.com/jQuery.Post/ and the parameters are essentially the same). But we still haven’t gotten rid of the magic strings. We still have controller names and action names represented as strings. This is going to blow your mind… If you’ve seen T4MVC, this will look familiar. We’re essentially doing the same sort of thing with my JavaScript router, but we’re porting the concept to JavaScript. The good news is that parameters to the controllers are directly reflected in the action function, just like T4MVC. And the even better news… IntlliSense is easily transferred to the JavaScript version if you’re using Visual Studio as your JavaScript editor. The additional data parameter gives you the ability to pass extra routing data to the URL formatter.   About the Magic You may be wondering how this all work. It’s actually quite simple. I’ve built a simple jQuery pluggin (called routeManager) that hangs off the main jQuery namespace and routes all the URLs. Every time your solution builds, a routing file will be generated with this pluggin, all your route and controller definitions along with your documentation. Then by the power of Visual Studio, you get some really slick IntelliSense that is hard to live without. But there are a few steps you have to take before this whole thing is going to work. First and foremost, you need a reference to the JsRouting.Core.dll to your projects containing controllers or routes. Second, you have to specify your routes in a bit of a non-standard way. See, we can’t just pull routes out of your App_Start in your Global.asax. We force you to build a route source like this: The way we determine the routes is by pulling in all RouteSources and generating routes based upon the mapped routes. There are various reasons why we can’t use RouteCollection (different post for another day)… but in this case, you get the same route mapping experience. Converting the RouteSource to a RouteCollection is trivial (there’s an extension method for that). Next thing you have to do is generate a documentation XML file. This is done by going to the project settings, going to the build tab and clicking the checkbox. (this isn’t required, but nice to have). The final thing you need to do is hook up the generation mechanism. Pop open your project file and look for the AfterBuild step. Now change the build step task to look like this: The “PathToOutputExe” is the path to the JsRouting.Output.exe file. This will change based on where you put the EXE. The “PathToOutputJs” is a path to the output JavaScript file. The “DicrectoryOfAssemblies” is a path to the directory containing controller and routing DLLs. The JsRouting.Output.exe executable pulls in all these assemblies and scans them for controllers and route sources.   Now that wasn’t too bad, was it :)   The State of the Project This is definitely not complete… I have a lot of plans for this little project of mine. For starters, I need to look at the generation mechanism. Either I will be creating a utility that will do the project file manipulation or I will go a different direction. I’d like some feedback on this if you feel partial either way. Another thing I don’t support currently is areas. While this wouldn’t be too hard to support, I just don’t use areas and I wanted something up quickly (this is, after all, for a current project of mine). I’ll be adding support shortly. There are a few things that I haven’t covered in this post that I will most certainly be covering in another post, such as routing constraints and how these will be translated to JavaScript. I decided to open source this whole thing, since it’s a nice little utility I think others should really be using. Currently we’re using ASP.NET MVC 2, but it should work with MVC 3 as well. I’ll upgrade it as soon as MVC 3 is released. Along those same lines, I’m investigating how this could be put on the NuGet feed. Show me the Bits! OK, OK! The code is posted on my GitHub account. Go nuts. Tell me what you think. Tell me what you want. Tell me that you hate it. All feedback is welcome! https://github.com/zowens/ASP.NET-MVC-JavaScript-Routing

  Read the article

• .NET to iOS: From WinForms to the iPad

  - by RobertChipperfield

  One of the great things about working at Red Gate is getting to play with new technology - and right now, that means mobile. A few weeks ago, we decided that a little research into the tablet computing arena was due, and purely from a numbers point of view, that suggested the iPad as a good target device. A quick trip to iPhoneDevCon in San Diego later, and Marine and I came back full of ideas, and with some concept of how iOS development was meant to work. Here's how we went from there to the release of Stacks & Heaps, our geeky take on the classic "Snakes & Ladders" game. Step 1: Buy a Mac I've played with many operating systems in my time: from the original BBC Model B, through DOS, Windows, Linux, and others, but I'd so far managed to avoid buying fruit-flavoured computer hardware! If you want to develop for the iPhone, iPad or iPod Touch, that's the first thing that needs to change. If you've not used OS X before, the first thing you'll realise is that everything is different! In the interests of avoiding a flame war in the comments section, I'll only go so far as to say that a lot of my Windows-flavoured muscle memory no longer worked. If you're in the UK, you'll also realise your keyboard is lacking a # key, and that " and @ are the other way around from normal. The wonderful Ukelele keyboard layout editor restores some sanity here, as long as you don't look at the keyboard when you're typing. I couldn't give up the PC entirely, but a handy application called Synergy comes to the rescue - it lets you share a single keyboard and mouse between multiple machines. There's a few limitations: Alt-Tab always seems to go to the Mac, and Windows 7's UAC dialogs require the local mouse for security reasons, but it gets you a long way at least. Step 2: Register as an Apple Developer You can register as an Apple Developer free of charge, and that lets you download XCode and the iOS SDK. You also get the iPhone / iPad emulator, which is handy, since you'll need to be a paid member before you can deploy your apps to a real device. You can either enroll as an individual, or as a company. They both cost the same ($99/year), but there's a few differences between them. If you register as a company, you can add multiple developers to your team (all for the same $99 - not $99 per developer), and you get to use your company name in the App Store. However, you'll need to send off significantly more documentation to Apple, and I suspect the process takes rather longer than for an individual, where they just need to verify some credit card details. Here's a tip: if you're registering as a company, do so as early as possible. The approval process can take a while to complete, so get the application in in plenty of time. Step 3: Learn to love the square brackets! Objective-C is the language of the iPad. C and C++ are also supported, and if you're doing some serious game development, you'll probably spend most of your time in C++ talking OpenGL, but for forms-based apps, you'll be interacting with a lot of the Objective-C SDK. Like shifting from Ctrl-C to Cmd-C, it feels a little odd at first, with the familiar string.format(.) turning into: NSString *myString = [NSString stringWithFormat:@"Hello world, it's %@", [NSDate date]]; Thankfully XCode's auto-complete is normally passable, if not up to Visual Studio's standards, which coupled with a huge amount of content on Stack Overflow means you'll soon get to grips with the API. You'll need to get used to some terminology changes, though; here's an incomplete approximation: Coming from a .NET background, there's some luxuries you no longer have developing Objective C in XCode: Generics! Remember back in .NET 1.1, when all collections were just objects? Yup, we're back there now. ReSharper. Or, more generally, very much refactoring support. The not-many-keystrokes to rename a class, its file, and al references to it in Visual Studio turns into a much more painful experience in XCode. Garbage collection. This is actually rather less of an issue than you might expect: if you follow the rules, the reference counting provided by Objective C gets you a long way without too much pain. Circular references are their usual problematic self, though. Decent exception handling. You do have exceptions, but they're nowhere near as widely used. Generally, if something goes wrong, you get nil (see translation table above) back. Which brings me on to. Calling a method on a nil object isn't a failure - it just returns nil itself! There's many arguments for and against this, but personally I fall into the "stuff should fail as quickly and explicitly as possible" camp. Less specifically, I found that there's more chance of code failing at runtime rather than getting caught at compile-time: using the @selector(.) syntax to pass a method signature isn't (can't be) checked at compile-time, so the first you know about a typo is a crash when you try and call it. The solution to this is of course lots of great testing, both automated and manual, but I still find comfort in provably correct type safety being enforced in addition to testing. Step 4: Submit to the App Store Assuming you want to distribute to more than a handful of devices, you're going to need to submit your app to the Apple App Store. There's a few gotchas in terms of getting builds signed with the right certificates, and you'll be bouncing around between XCode and iTunes Connect a fair bit, but eventually you get everything checked off the to-do list, and are ready to upload your first binary! With some amount of anticipation, I pressed the Upload button in XCode, ready to release our creation into the world, but was instead greeted by an error informing me my XML file was malformed. Uh. A little Googling later, and it turned out that a simple rename from "Stacks&Heaps.app" to "StacksAndHeaps.app" worked around an XML escaping bug, and we were good to go. The next step is to wait for approval (or otherwise). After a couple of weeks of intensive development, this part is agonising. Did we make it? The Apple jury is still out at the moment, but our fingers are firmly crossed! In the meantime, you can see some screenshots and leave us your email address if you'd like us to get in touch when it does go live at the MobileFoo website. Step 5: Profit! Actually, that wasn't the idea here: Stacks & Heaps is free; there's no adverts, and we're not going to sell all your data either. So why did we do it? We wanted to get an idea of what it's like to move from coding for a desktop environment, to something completely different. We don't know whether in a year's time, the iPad will still be the dominant force, or whether Android will have smoothed out some bugs, tweaked the performance, and polished the UI, but I think it's a fairly sure bet that the tablet form factor is here to stay. We want to meet people who are using it, start chatting to them, and find out about some of the pain they're feeling. What better way to do that than do it ourselves, and get to write a cool game in the process?

  Read the article

• Writing the tests for FluentPath

  - by Bertrand Le Roy

  Writing the tests for FluentPath is a challenge. The library is a wrapper around a legacy API (System.IO) that wasn’t designed to be easily testable. If it were more testable, the sensible testing methodology would be to tell System.IO to act against a mock file system, which would enable me to verify that my code is doing the expected file system operations without having to manipulate the actual, physical file system: what we are testing here is FluentPath, not System.IO. Unfortunately, that is not an option as nothing in System.IO enables us to plug a mock file system in. As a consequence, we are left with few options. A few people have suggested me to abstract my calls to System.IO away so that I could tell FluentPath – not System.IO – to use a mock instead of the real thing. That in turn is getting a little silly: FluentPath already is a thin abstraction around System.IO, so layering another abstraction between them would double the test surface while bringing little or no value. I would have to test that new abstraction layer, and that would bring us back to square one. Unless I’m missing something, the only option I have here is to bite the bullet and test against the real file system. Of course, the tests that do that can hardly be called unit tests. They are more integration tests as they don’t only test bits of my code. They really test the successful integration of my code with the underlying System.IO. In order to write such tests, the techniques of BDD work particularly well as they enable you to express scenarios in natural language, from which test code is generated. Integration tests are being better expressed as scenarios orchestrating a few basic behaviors, so this is a nice fit. The Orchard team has been successfully using SpecFlow for integration tests for a while and I thought it was pretty cool so that’s what I decided to use. Consider for example the following scenario: Scenario: Change extension Given a clean test directory When I change the extension of bar\notes.txt to foo Then bar\notes.txt should not exist And bar\notes.foo should exist This is human readable and tells you everything you need to know about what you’re testing, but it is also executable code. What happens when SpecFlow compiles this scenario is that it executes a bunch of regular expressions that identify the known Given (set-up phases), When (actions) and Then (result assertions) to identify the code to run, which is then translated into calls into the appropriate methods. Nothing magical. Here is the code generated by SpecFlow: [NUnit.Framework.TestAttribute()] [NUnit.Framework.DescriptionAttribute("Change extension")] public virtual void ChangeExtension() { TechTalk.SpecFlow.ScenarioInfo scenarioInfo = new TechTalk.SpecFlow.ScenarioInfo("Change extension", ((string[])(null))); #line 6 this.ScenarioSetup(scenarioInfo); #line 7 testRunner.Given("a clean test directory"); #line 8 testRunner.When("I change the extension of " + "bar\\notes.txt to foo"); #line 9 testRunner.Then("bar\\notes.txt should not exist"); #line 10 testRunner.And("bar\\notes.foo should exist"); #line hidden testRunner.CollectScenarioErrors();} The #line directives are there to give clues to the debugger, because yes, you can put breakpoints into a scenario: The way you usually write tests with SpecFlow is that you write the scenario first, let it fail, then write the translation of your Given, When and Then into code if they don’t already exist, which results in running but failing tests, and then you write the code to make your tests pass (you implement the scenario). In the case of FluentPath, I built a simple Given method that builds a simple file hierarchy in a temporary directory that all scenarios are going to work with: [Given("a clean test directory")] public void GivenACleanDirectory() { _path = new Path(SystemIO.Path.GetTempPath()) .CreateSubDirectory("FluentPathSpecs") .MakeCurrent(); _path.GetFileSystemEntries() .Delete(true); _path.CreateFile("foo.txt", "This is a text file named foo."); var bar = _path.CreateSubDirectory("bar"); bar.CreateFile("baz.txt", "bar baz") .SetLastWriteTime(DateTime.Now.AddSeconds(-2)); bar.CreateFile("notes.txt", "This is a text file containing notes."); var barbar = bar.CreateSubDirectory("bar"); barbar.CreateFile("deep.txt", "Deep thoughts"); var sub = _path.CreateSubDirectory("sub"); sub.CreateSubDirectory("subsub"); sub.CreateFile("baz.txt", "sub baz") .SetLastWriteTime(DateTime.Now); sub.CreateFile("binary.bin", new byte[] {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0xFF}); } Then, to implement the scenario that you can read above, I had to write the following When: [When("I change the extension of (.*) to (.*)")] public void WhenIChangeTheExtension( string path, string newExtension) { var oldPath = Path.Current.Combine(path.Split('\\')); oldPath.Move(p => p.ChangeExtension(newExtension)); } As you can see, the When attribute is specifying the regular expression that will enable the SpecFlow engine to recognize what When method to call and also how to map its parameters. For our scenario, “bar\notes.txt” will get mapped to the path parameter, and “foo” to the newExtension parameter. And of course, the code that verifies the assumptions of the scenario: [Then("(.*) should exist")] public void ThenEntryShouldExist(string path) { Assert.IsTrue(_path.Combine(path.Split('\\')).Exists); } [Then("(.*) should not exist")] public void ThenEntryShouldNotExist(string path) { Assert.IsFalse(_path.Combine(path.Split('\\')).Exists); } These steps should be written with reusability in mind. They are building blocks for your scenarios, not implementation of a specific scenario. Think small and fine-grained. In the case of the above steps, I could reuse each of those steps in other scenarios. Those tests are easy to write and easier to read, which means that they also constitute a form of documentation. Oh, and SpecFlow is just one way to do this. Rob wrote a long time ago about this sort of thing (but using a different framework) and I highly recommend this post if I somehow managed to pique your interest: http://blog.wekeroad.com/blog/make-bdd-your-bff-2/ And this screencast (Rob always makes excellent screencasts): http://blog.wekeroad.com/mvc-storefront/kona-3/ (click the “Download it here” link)

  Read the article

• Integrating Coherence & Java EE 6 Applications using ActiveCache

  - by Ricardo Ferreira

  OK, so you are a developer and are starting a new Java EE 6 application using the most wonderful features of the Java EE platform like Enterprise JavaBeans, JavaServer Faces, CDI, JPA e another cool stuff technologies. And your architecture need to hold piece of data into distributed caches to improve application's performance, scalability and reliability? If this is your current facing scenario, maybe you should look closely in the solutions provided by Oracle WebLogic Server. Oracle had integrated WebLogic Server and its champion data caching technology called Oracle Coherence. This seamless integration between this two products provides a comprehensive environment to develop applications without the complexity of extra Java code to manage cache as a dependency, since Oracle provides an DI ("Dependency Injection") mechanism for Coherence, the same DI mechanism available in standard Java EE applications. This feature is called ActiveCache. In this article, I will show you how to configure ActiveCache in WebLogic and at your Java EE application. Configuring WebLogic to manage Coherence Before you start changing your application to use Coherence, you need to configure your Coherence distributed cache. The good news is, you can manage all this stuff without writing a single line of code of XML or even Java. This configuration can be done entirely in the WebLogic administration console. The first thing to do is the setup of a Coherence cluster. A Coherence cluster is a set of Coherence JVMs configured to form one single view of the cache. This means that you can insert or remove members of the cluster without the client application (the application that generates or consume data from the cache) knows about the changes. This concept allows your solution to scale-out without changing the application server JVMs. You can growth your application only in the data grid layer. To start the configuration, you need to configure an machine that points to the server in which you want to execute the Coherence JVMs. WebLogic Server allows you to do this very easily using the Administration Console. In this example, I will call the machine as "coherence-server". Remember that in order to the machine concept works, you need to ensure that the NodeManager are being executed in the target server that the machine points to. The NodeManager executable can be found in <WLS_HOME>/server/bin/startNodeManager.sh. The next thing to do is to configure a Coherence cluster. In the WebLogic administration console, go to Environment > Coherence Clusters and click in "New". Call this Coherence cluster of "my-coherence-cluster". Click in next. Specify a valid cluster address and port. The Coherence members will communicate with each other through this address and port. Our Coherence cluster are now configured. Now it is time to configure the Coherence members and add them to this cluster. In the WebLogic administration console, go to Environment > Coherence Servers and click in "New". In the field "Name" set to "coh-server-1". In the field "Machine", associate this Coherence server to the machine "coherence-server". In the field "Cluster", associate this Coherence server to the cluster named "my-coherence-cluster". Click in "Finish". Start the Coherence server using the "Control" tab of WebLogic administration console. This will instruct WebLogic to start a new JVM of Coherence in the target machine that should join the pre-defined Coherence cluster. Configuring your Java EE Application to Access Coherence Now lets pass to the funny part of the configuration. The first thing to do is to inform your Java EE application which Coherence cluster to join. Oracle had updated WebLogic server deployment descriptors so you will not have to change your code or the containers deployment descriptors like application.xml, ejb-jar.xml or web.xml. In this example, I will show you how to enable DI ("Dependency Injection") to a Coherence cache from a Servlet 3.0 component. In the WEB-INF/weblogic.xml deployment descriptor, put the following metadata information: <?xml version="1.0" encoding="UTF-8"?> <wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.4/weblogic-web-app.xsd"> <wls:context-root>myWebApp</wls:context-root> <wls:coherence-cluster-ref> <wls:coherence-cluster-name>my-coherence-cluster</wls:coherence-cluster-name> </wls:coherence-cluster-ref> </wls:weblogic-web-app> As you can see, using the "coherence-cluster-name" tag, we are informing our Java EE application that it should join the "my-coherence-cluster" when it loads in the web container. Without this information, the application will not be able to access the predefined Coherence cluster. It will form its own Coherence cluster without any members. So never forget to put this information. Now put the coherence.jar and active-cache-1.0.jar dependencies at your WEB-INF/lib application classpath. You need to deploy this dependencies so ActiveCache can automatically take care of the Coherence cluster join phase. This dependencies can be found in the following locations: - <WLS_HOME>/common/deployable-libraries/active-cache-1.0.jar - <COHERENCE_HOME>/lib/coherence.jar Finally, you need to write down the access code to the Coherence cache at your Servlet. In the following example, we have a Servlet 3.0 component that access a Coherence cache named "transactions" and prints into the browser output the content (the ammount property) of one specific transaction. package com.oracle.coherence.demo.activecache; import java.io.IOException; import javax.annotation.Resource; import javax.servlet.ServletException; import javax.servlet.annotation.WebServlet; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import com.tangosol.net.NamedCache; @WebServlet("/demo/specificTransaction") public class TransactionServletExample extends HttpServlet { @Resource(mappedName = "transactions") NamedCache transactions; protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { int transId = Integer.parseInt(request.getParameter("transId")); Transaction transaction = (Transaction) transactions.get(transId); response.getWriter().println("<center>" + transaction.getAmmount() + "</center>"); } } Thats it! No more configuration is necessary and you have all set to start producing and getting data to/from Coherence. As you can see in the example code, the Coherence cache are treated as a normal dependency in the Java EE container. The magic happens behind the scenes when the ActiveCache allows your application to join the defined Coherence cluster. The most interesting thing about this approach is, no matter which type of Coherence cache your are using (Distributed, Partitioned, Replicated, WAN-Remote) for the client application, it is just a simple attribute member of com.tangosol.net.NamedCache type. And its all managed by the Java EE container as an dependency. This means that if you inject the same dependency (the Coherence cache named "transactions") in another Java EE component (JSF managed-bean, Stateless EJB) the cache will be the same. Cool isn't it? Thanks to the CDI technology, we can extend the same support for non-Java EE standards components like simple POJOs. This means that you are not forced to only use Servlets, EJBs or JSF in order to inject Coherence caches. You can do the same approach for regular POJOs created for you and managed by lightweight containers like Spring or Seam.

  Read the article

• CodePlex Daily Summary for Wednesday, May 19, 2010

  CodePlex Daily Summary for Wednesday, May 19, 2010New Projects3FD - Framework For Fast Development: This is a C++ framework that provides a solid error handling structure, garbage collection, multi-threading and portability between compilers. The ...ali test project: test projectAttribute Builder: The Attribute Builder builds an attribute from a lambda expression because it can.BDK0008: it is a food lovers websitecgdigest: cg digest template for non-profit orgCokmez: Bilmuh cokmez duyuru sistemiDot Game: It is a dot game that our Bangladeshi people used to play at their childhood time and their last time when they are poor for working.ESRI Javascript .NET Integration: Visual Studio project that shows how to integrate the Esri Javascript API with .NET Exchange 2010 RBAC Editor (RBAC GUI): Exchange 2010 RBAC Editor (RBAC GUI) Developed in C# and using Powershell behind the scenes RBAC tool to simplfy RBAC administrationFile Validator (Validador de Archivos): Componente que permite realizar la validación de archivos (txt, imagenes, PDF, etc) actualmente solo tiene implementado la parte de los txt, permit...Grip 09 Lab4: GripjPageFlipper: This is a wonderful implementation of page flipper entirely based on HTML 5 <canvas> tag. It means that it can work in any browser that supports HT...Main project: Index bird families and associated species. Malware Analysis and Can Handler: MACH is a tool to organize and catalog your malware analysis canned responses, and to track the topic response lifecycle for forum experts.Perf Web: Performance team web sitePiPiBugNet: PiPiBugNet是一套全新的开源Bug管理系统。 PiPiBugNet代码基于ASP.NET 2.0平台开发，编程语言为C#。 PiPiBugNet界面基于Ext JS设计，提供了极佳的用户体验。RemoteDesktop: integrated remote console, desktop and chat utilityRuneScape emulation done right.: RuneScape emulator.Sandkasten: SandkastenSilverlight Metro Theme: Metro Theme for Silverlight.Silverlight Stereoscopy: Stereoscopy with Silverlight.Twitivia: Twitivia is an online trivia service that runs through twitter and is being used as an example set of projects. C#, MVC, Windows Services, Linq ...XPool: A simple school project.New ReleasesDot Game: 'Dot Game' first release: Dot Game first release This is the 'Dot Game' first release.DotNetNuke® Store: 02.01.35: What's New in this release? Bugs corrected: - Fixed a resource for the header in the Category list of the Store Admin module. - Added several test...ESRI Javascript .NET Integration: Map search results in a DataView: Visual Studio 2010 example showing how to pass Map results back to ASP.NET for use in a DataView.Exchange 2010 RBAC Editor (RBAC GUI): RBAC Editor: This binary is still beta (0.0.9.1) but in most case it's very stableExtending C# editor - Outlining, classification: first revision: a couple of bug has been eliminated, performance improvementFloe IRC Client: Floe IRC Client 2010-05 R6: Corrected bug where text would be unexpectedly copied to the clipboard.Floe IRC Client: Floe IRC Client 2010-05 R7: - Fixed bug where text would show up in a query window with someone if they said something on a channel that you are both present on.Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.0.9 GA released: Hi, Today we have released the final version of Visifire v3.0.9 which contains the following enhancements: * Two new properties ActualAxisMin...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.2 GA Released: Hi, Today we have released the final version of Visifire v3.5.2 which contains the following enhancements: Two new properties ActualAxisMinimum a...HB Batch Encoder Mk 2: HB Batch Encoder Mk2 v1.02: Added .mov support.jPageFlipper: jPageFlipper 0.9: This is an initial community preview of jPageFlipper. It's not ready for production usage but has almost all functionality implemented.linq.js - LINQ for JavaScript: ver 2.1.0.0: Add Class Dictionary Lookup Grouping OrderedEnumerable Add Method ToDictionary MemoizeAll Share Let Add Overload ...Microsoft Research Biology Extension for Excel: MSR Biology Extension for Excel - M9: M9 Release includes the following updates to the previous release: > Import / Export support from Excel for multiple file formats > Bug fixes and ...Nifty CSharp Tools: Event Watcher: Event Watcher!Paint.NET Bulk Image Processor: Paint.NET Bulk Image Processor v1.0: This is the initial release of the Paint.NET Bulk Image processor plugin. All feedback is welcome.PiPiBugNet: PiPiBugNet架构设计: PiPiBugNet架构设计，未包含功能实现RuneScape emulation done right.: rc0: Release cantidate 0.Rx Contrib: V1.6: Adding CCR queue as adapter for the ReactiveQueue credits goes to Yuval Mazor http://blogs.microsoft.co.il/blogs/yuvmaz/Silverlight Metro Theme: Silverlight Metro Theme Alpha 1: Silverlight Metro Theme Alpha 1Silverlight Stereoscopy: Silverlight Stereoscopy Alpha 1: Silverlight Stereoscopy Alpha 20100518Stratosphere: Stratosphere 1.0.6.0: Introduced support for batch put Introduced Support for conditional updates and consistent read Added support for select conditions Brought t...VCC: Latest build, v2.1.30518.0: Automatic drop of latest buildVideo Downloader: Example Program - 1.1: Example Program showing the features of the DLL and what can be achieved using it. For DLL Version 1.1.Video Downloader: Version 1.1: Version 1.1 See Home Page for usage and more information regarding new features. Please remember changes at You-Tube can prevent this software from...WatchersNET.TagCloud: WatchersNET.TagCloud 01.06.00: Whats New New Tag Mode: Show Tags from Ventrian.com NewsArticles Module New Tag Mode: Show Tags from Ventrian.com SimpleGallery Module Hyperlin...Windows Double Explorer: WDE v0.4: -optimization -switch to new vst2010 -viewer close now by pressing escape -reorder tabs -send selected fullname or shortnames via email (eye button...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryRawrPHPExcelGMap.NET - Great Maps for Windows Forms & PresentationCustomer Portal Accelerator for Microsoft Dynamics CRMBlogEngine.NETWindows Azure Command-line Tools for PHP DevelopersCassiniDev - Cassini 3.5/4.0 Developers EditionSQL Server PowerShell ExtensionsFluent Ribbon Control Suite

  Read the article

• Learning content for MCSDs: Web Applications and Windows Store Apps using HTML5

  Recently, I started again to learn for various Microsoft certifications. First candidate on my way to MSCD: Web Applications is the Exam 70-480: Programming in HTML5 with JavaScript and CSS3. Motivation to go for a Microsoft exam I guess, this is quite personal but let me briefly describe my intentions to go that exam. First, I'm doing web development since the 1990's. Working with HTML, CSS and Javascript is happening almost daily in my workspace. And honestly, I do not only do 'pure' web development but already integrated several HTML/CSS/Javascript frontend UIs into an existing desktop application (written in Visual FoxPro) inclusive two-way communication and data exchange. Hm, might be an interesting topic for another blog article here... Second, this exam has a very interesting aspect which is listed at the bottom of the exam's details: Credit Toward Certification When you pass Exam 70-480: Programming in HTML5 with JavaScript and CSS3, you complete the requirements for the following certification(s): Programming in HTML5 with JavaScript and CSS3 Specialist Exam 70-480: Programming in HTML5 with JavaScript and CSS3: counts as credit toward the following certification(s): MCSD: Web Applications MCSD: Windows Store Apps using HTML5 So, passing one single exam will earn you specialist certification straight-forward, and opens the path to higher levels of certifications. Preparations and learning path Well, due to a newsletter from Microsoft Learning (MSL) I caught interest in picking up the circumstances and learning materials for this particular exam. As of writing this article there is a promotional / voucher code available which enables you to register for this exam for free! Simply register yourself with or log into your existing account at Prometric, choose the exam for a testing facility near to you and enter the voucher code HTMLJMP (available through 31.03.2013 or while supplies last). Hurry up, there are restrictions... As stated above, I'm already very familiar with web development and the programming flavours involved into this. But of course, it is always good to freshen up your knowledge and reflect on yourself. Microsoft is putting a lot of effort to attract any kind of developers into the 'App Development'. Whether it is for the Windows 8 Store or the Windows Phone 8 Store, doesn't really matter. They simply need more apps. This demand for skilled developers also comes with a nice side-effect: Lots and lots of material to study. During the first couple of hours, I could easily gather high quality preparation material - again for free! Following is just a small list of starting points. If you have more resources, please drop me a message in the comment section, and I'll be glad to update this article accordingly. Developing HTML5 Apps Jump Start This is an accelerated jump start video course on development of HTML5 Apps for Windows 8. There are six modules that are split into two video sessions per module. Very informative and intense course material. This is packed stuff taken from an official preparation course for exam 70-480. Developing Windows Store Apps with HTML5 Jump Start Again, an accelerated preparation video course on Windows 8 Apps. There are six modules with two video sessions each which will catapult you to your exam. This is also related to preps for exam 70-481. Programming Windows 8 Apps with HTML, CSS, and JavaScript Kraig Brockschmidt delves into the ups and downs of Windows 8 App development over 800+ pages. Great eBook to read, study, and to practice the samples - best of all, it's for free. codeSHOW() This is a Windows 8 HTML/JS project with the express goal of demonstrating simple development concepts for the Windows 8 platform. Code, code and more code... absolutely great stuff to study and practice. Microsoft Virtual Academy I already wrote about the MVA in a previous article. Well, if you haven't registered yourself yet, now is the time. The list is not complete for sure, but this might keep you busy for at least one or even two weeks to go through the material. Please don't hesitate to add more resources in the comment section. Right now, I'm already through all videos once, and digging my way through chapter 4 of Kraig's book. Additional material - Pluralsight Apart from those free online resources, I also following some courses from the excellent library of Pluralsight. They already have their own section for Windows 8 development, but of course, you get companion material about HTML5, CSS and Javascript in other sections, too. Introduction to Building Windows 8 Applications Building Windows 8 Applications with JavaScript and HTML Selling Windows 8 Apps HTML5 Fundamentals Using HTML5 and CSS3 HTML5 Advanced Topics CSS3 etc... Interesting to see that Michael Palermo provides his course material on multiple platforms. Fantastic! You might also pay a visit to his personal blog. Hm, it just came to my mind that Aaron Skonnard of Pluralsight publishes so-called '24 hours Learning Paths' based on courses available in the course library. Would be interested to see a combination for Windows 8 App development using HTML5, CSS3 and Javascript in the future. Recommended workspace environment Well, you might have guessed it but this requires Windows 8, Visual Studio 2012 Express or another flavour, and a valid Developers License. Due to an MSDN subscription I working on VS 2012 Premium with some additional tools by Telerik. Honestly, the fastest way to get you up and running for Windows 8 App development is the source code archive of codeSHOW(). It does not only give you all source code in general but contains a couple of SDKs like Bing Maps, Microsoft Advertising, Live ID, and Telerik Windows 8 controls... for free! Hint: Get the Windows Phone 8 SDK as well. Don't worry, while you are studying the material for Windows 8 you will be able to leverage from this knowledge to development for the phone platform, too. It takes roughly one to two hours to get your workspace and learning environment, at least this was my time frame due to slow internet connection and an aged spare machine. ;-) Oh, before I forget to mention it, as soon as you're done, go quickly to the Windows Store and search for ClassBrowserPlus. You might not need it ad hoc for your development using HTML5, CSS and Javascript but I think that it is a great developer's utility that enables you to view the properties, methods and events (along with help text) for all Windows 8 classes. It's always good to look behind the scenes and to explore how it is made. Idea: Start/join a learning group The way you learn new things or intensify your knowledge in a certain technology is completely up to your personal preference. Back in my days at the university, we used to meet once or twice a week in a small quiet room to exchange our progress, questions and problems we ran into. In general, I recommend to any software craftsman to lift your butt and get out to exchange with other developers. Personally, I like this approach, as it gives you new points of view and an insight into others' own experience with certain techniques and how they managed to solve tricky issues. Just keep it relaxed and not too formal after all, and you might a have a good time away from your dull office desk. Give your machine a break, too.

  Read the article

• C# Extension Methods - To Extend or Not To Extend...

  - by James Michael Hare

  I've been thinking a lot about extension methods lately, and I must admit I both love them and hate them. They are a lot like sugar, they taste so nice and sweet, but they'll rot your teeth if you eat them too much.   I can't deny that they aren't useful and very handy. One of the major components of the Shared Component library where I work is a set of useful extension methods. But, I also can't deny that they tend to be overused and abused to willy-nilly extend every living type.   So what constitutes a good extension method? Obviously, you can write an extension method for nearly anything whether it is a good idea or not. Many times, in fact, an idea seems like a good extension method but in retrospect really doesn't fit.   So what's the litmus test? To me, an extension method should be like in the movies when a person runs into their twin, separated at birth. You just know you're related. Obviously, that's hard to quantify, so let's try to put a few rules-of-thumb around them.   A good extension method should:     Apply to any possible instance of the type it extends.     Simplify logic and improve readability/maintainability.     Apply to the most specific type or interface applicable.     Be isolated in a namespace so that it does not pollute IntelliSense.     So let's look at a few examples in relation to these rules.   The first rule, to me, is the most important of all. Once again, it bears repeating, a good extension method should apply to all possible instances of the type it extends. It should feel like the long lost relative that should have been included in the original class but somehow was missing from the family tree.    Take this nifty little int extension, I saw this once in a blog and at first I really thought it was pretty cool, but then I started noticing a code smell I couldn't quite put my finger on. So let's look:       public static class IntExtensinos     {         public static int Seconds(int num)         {             return num * 1000;         }           public static int Minutes(int num)         {             return num * 60000;         }     }     This is so you could do things like:       ...     Thread.Sleep(5.Seconds());     ...     proxy.Timeout = 1.Minutes();     ...     Awww, you say, that's cute! Well, that's the problem, it's kitschy and it doesn't always apply (and incidentally you could achieve the same thing with TimeStamp.FromSeconds(5)). It's syntactical candy that looks cool, but tends to rot and pollute the code. It would allow things like:       total += numberOfTodaysOrders.Seconds();     which makes no sense and should never be allowed. The problem is you're applying an extension method to a logical domain, not a type domain. That is, the extension method Seconds() doesn't really apply to ALL ints, it applies to ints that are representative of time that you want to convert to milliseconds.    Do you see what I mean? The two problems, in a nutshell, are that a) Seconds() called off a non-time value makes no sense and b) calling Seconds() off something to pass to something that does not take milliseconds will be off by a factor of 1000 or worse.   Thus, in my mind, you should only ever have an extension method that applies to the whole domain of that type.   For example, this is one of my personal favorites:       public static bool IsBetween<T>(this T value, T low, T high)         where T : IComparable<T>     {         return value.CompareTo(low) >= 0 && value.CompareTo(high) <= 0;     }   This allows you to check if any IComparable<T> is within an upper and lower bound. Think of how many times you type something like:       if (response.Employee.Address.YearsAt >= 2         && response.Employee.Address.YearsAt <= 10)     {     ...     }     Now, you can instead type:       if(response.Employee.Address.YearsAt.IsBetween(2, 10))     {     ...     }     Note that this applies to all IComparable<T> -- that's ints, chars, strings, DateTime, etc -- and does not depend on any logical domain. In addition, it satisfies the second point and actually makes the code more readable and maintainable.   Let's look at the third point. In it we said that an extension method should fit the most specific interface or type possible. Now, I'm not saying if you have something that applies to enumerables, you create an extension for List, Array, Dictionary, etc (though you may have reasons for doing so), but that you should beware of making things TOO general.   For example, let's say we had an extension method like this:       public static T ConvertTo<T>(this object value)     {         return (T)Convert.ChangeType(value, typeof(T));     }         This lets you do more fluent conversions like:       double d = "5.0".ConvertTo<double>();     However, if you dig into Reflector (LOVE that tool) you will see that if the type you are calling on does not implement IConvertible, what you convert to MUST be the exact type or it will throw an InvalidCastException. Now this may or may not be what you want in this situation, and I leave that up to you. Things like this would fail:       object value = new Employee();     ...     // class cast exception because typeof(IEmployee) != typeof(Employee)     IEmployee emp = value.ConvertTo<IEmployee>();       Yes, that's a downfall of working with Convertible in general, but if you wanted your fluent interface to be more type-safe so that ConvertTo were only callable on IConvertibles (and let casting be a manual task), you could easily make it:         public static T ConvertTo<T>(this IConvertible value)     {         return (T)Convert.ChangeType(value, typeof(T));     }         This is what I mean by choosing the best type to extend. Consider that if we used the previous (object) version, every time we typed a dot ('.') on an instance we'd pull up ConvertTo() whether it was applicable or not. By filtering our extension method down to only valid types (those that implement IConvertible) we greatly reduce our IntelliSense pollution and apply a good level of compile-time correctness.   Now my fourth rule is just my general rule-of-thumb. Obviously, you can make extension methods as in-your-face as you want. I included all mine in my work libraries in its own sub-namespace, something akin to:       namespace Shared.Core.Extensions { ... }     This is in a library called Shared.Core, so just referencing the Core library doesn't pollute your IntelliSense, you have to actually do a using on Shared.Core.Extensions to bring the methods in. This is very similar to the way Microsoft puts its extension methods in System.Linq. This way, if you want 'em, you use the appropriate namespace. If you don't want 'em, they won't pollute your namespace.   To really make this work, however, that namespace should only include extension methods and subordinate types those extensions themselves may use. If you plant other useful classes in those namespaces, once a user includes it, they get all the extensions too.   Also, just as a personal preference, extension methods that aren't simply syntactical shortcuts, I like to put in a static utility class and then have extension methods for syntactical candy. For instance, I think it imaginable that any object could be converted to XML:       namespace Shared.Core     {         // A collection of XML Utility classes         public static class XmlUtility         {             ...             // Serialize an object into an xml string             public static string ToXml(object input)             {                 var xs = new XmlSerializer(input.GetType());                   // use new UTF8Encoding here, not Encoding.UTF8. The later includes                 // the BOM which screws up subsequent reads, the former does not.                 using (var memoryStream = new MemoryStream())                 using (var xmlTextWriter = new XmlTextWriter(memoryStream, new UTF8Encoding()))                 {                     xs.Serialize(xmlTextWriter, input);                     return Encoding.UTF8.GetString(memoryStream.ToArray());                 }             }             ...         }     }   I also wanted to be able to call this from an object like:       value.ToXml();     But here's the problem, if i made this an extension method from the start with that one little keyword "this", it would pop into IntelliSense for all objects which could be very polluting. Instead, I put the logic into a utility class so that users have the choice of whether or not they want to use it as just a class and not pollute IntelliSense, then in my extensions namespace, I add the syntactical candy:       namespace Shared.Core.Extensions     {         public static class XmlExtensions         {             public static string ToXml(this object value)             {                 return XmlUtility.ToXml(value);             }         }     }   So now it's the best of both worlds. On one hand, they can use the utility class if they don't want to pollute IntelliSense, and on the other hand they can include the Extensions namespace and use as an extension if they want. The neat thing is it also adheres to the Single Responsibility Principle. The XmlUtility is responsible for converting objects to XML, and the XmlExtensions is responsible for extending object's interface for ToXml().

  Read the article

• Creating an SMF service for mercurial web server

  - by Chris W Beal

  I'm working on a project at the moment, which has a number of contributers. We're managing the project gate (which is stand alone) with mercurial. We want to have an easy way of seeing the changelog, so we can show management what is going on.  Luckily mercurial provides a basic web server which allows you to see the changes, and drill in to change sets. This can be run as a daemon, but as it was running on our build server, every time it was rebooted, someone needed to remember to start the process again. This is of course a classic usage of SMF. Now I'm not an experienced person at writing SMF services, so it took me 1/2 an hour or so to figure it out the first time. But going forward I should know what I'm doing a bit better. I did reference this doc extensively. Taking a step back, the command to start the mercurial web server is $ hg serve -p <port number> -d So we somehow need to get SMF to run that command for us. In the simplest form, SMF services are really made up of two components. The manifest Usually lives in /var/svc/manifest somewhere Can be imported from any location The method Usually live in /lib/svc/method I simply put the script straight in that directory. Not very repeatable, but it worked Can take an argument of start, stop, or refresh Lets start with the manifest. This looks pretty complex, but all it's doing is describing the service name, the dependencies, the start and stop methods, and some properties. The properties can be by instance, that is to say I could have multiple hg serve processes handling different mercurial projects, on different ports simultaneously Here is the manifest I wrote. I stole extensively from the examples in the Documentation. So my manifest looks like this $ cat hg-serve.xml <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type='manifest' name='hg-serve'> <service name='application/network/hg-serve' type='service' version='1'> <dependency name='network' grouping='require_all' restart_on='none' type='service'> <service_fmri value='svc:/milestone/network:default' /> </dependency> <exec_method type='method' name='start' exec='/lib/svc/method/hg-serve %m' timeout_seconds='2' /> <exec_method type='method' name='stop' exec=':kill' timeout_seconds='2'> </exec_method> <instance name='project-gate' enabled='true'> <method_context> <method_credential user='root' group='root' /> </method_context> <property_group name='hg-serve' type='application'> <propval name='path' type='astring' value='/src/project-gate'/> <propval name='port' type='astring' value='9998' /> </property_group> </instance> <stability value='Evolving' /> <template> <common_name> <loctext xml:lang='C'>hg-serve</loctext> </common_name> <documentation> <manpage title='hg' section='1' /> </documentation> </template> </service> </service_bundle> So the only things I had to decide on in this are the service name "application/network/hg-serve" the start and stop methods (more of which later) and the properties. This is the information I need to pass to the start method script. In my case the port I want to start the web server on "9998", and the path to the source gate "/src/project-gate". These can be read in to the start method. So now lets look at the method scripts $ cat /lib/svc/method/hg-serve #!/sbin/sh # # # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. # # Standard prolog # . /lib/svc/share/smf_include.sh if [ -z $SMF_FMRI ]; then echo "SMF framework variables are not initialized." exit $SMF_EXIT_ERR fi # # Build the command line flags # # Get the port and directory from the SMF properties port=`svcprop -c -p hg-serve/port $SMF_FMRI` dir=`svcprop -c -p hg-serve/path $SMF_FMRI` echo "$1" case "$1" in 'start') cd $dir /usr/bin/hg serve -d -p $port ;; *) echo "Usage: $0 {start|refresh|stop}" exit 1 ;; esac exit $SMF_EXIT_OK This is all pretty self explanatory, we read the port and directory using svcprop, and use those simply to run a command in the start case. We don't need to implement a stop case, as the manifest says to use "exec=':kill'for the stop method. Now all we need to do is import the manifest and start the service, but first verify the manifest # svccfg verify /path/to/hg-serve.xml If that doesn't give an error try importing it # svccfg import /path/to/hg-serve.xml If like me you originally put the hg-serve.xml file in /var/svc/manifest somewhere you'll get an error and told to restart the import service svccfg: Restarting svc:/system/manifest-import The manifest being imported is from a standard location and should be imported with the command : svcadm restart svc:/system/manifest-import # svcadm restart svc:/system/manifest-import and you're nearly done. You can look at the service using svcs -l # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled false state disabled next_state none state_time Thu May 31 16:11:47 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15749 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) And look at the interesting properties # svcprop hg-serve hg-serve/path astring /src/project-gate hg-serve/port astring 9998 ...stuff deleted.... Then simply enable the service and if every things gone right, you can point your browser at http://server:9998 and get a nice graphical log of project activity. # svcadm enable hg-serve # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled true state online next_state none state_time Thu May 31 16:18:11 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15858 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) None of this is rocket science, but a bit fiddly. Hence I thought I'd blog it. It might just be you see this in google and it clicks with you more than one of the many other blogs or how tos about it. Plus I can always refer back to it myself in 3 weeks, when I want to add another project to the server, and I've forgotten how to do it.

  Read the article

• Hard drive mounted at / , duplicate mounted hard drive after using MountManager

  - by HellHarvest

  possible duplicate post I'm running 12.04 64bit. My system is a dual boot for both Ubuntu and Windows7. Both operating systems are sharing the drive named "Elements". My volume named "Elements" is a 1TB SATA NTFS hard drive that shows up twice in the side bar in nautilus. One of the icons is functional and even has the convenient "eject" icon next to it. Below is a picture of the left menu in Nautilus, with System Monitor-File Systems tab open on top of it. Can someone advise me about how to get rid of this extra icon? I think the problem is much more deep-rooted than just a GUI glitch on Nautilus' part. The other icon does nothing but spit out the following error when I click on it (image below). This only happened AFTER I tried using Mount Manager to automate mounting the drive at start up. I've already uninstalled Mount Manager, and restarted, but the problem didn't go away. The hard drive does mount automatically now, so I guess that's cool. But now, every time I boot up now and open Nautilus, BOTH of these icons appear, one of which is fictitious and useless. According to the image above and the outputs of several other commands, it appears to be mounted at / In which case, no matter where I am in Nautilus when I try to click on that icon, of course it will tell me that that drive is in use by another program... Nautilus. I'm afraid of trying to unmount this hard drive (sdb6) because of where it appears to be mounted. I'm kind of a noob, and I have this gut feeling that tells me trying to unmount a drive at / will destroy my entire file system. This fear was further strengthened by the output of "$ fsck" at the very bottom of this post. Error immediately below when that 2nd "Elements" hard drive is clicked in Nautilus: Unable to mount Elements Mount is denied because the NTFS volume is already exclusively opened. The volume may be already mounted, or another software may use it which could be identified for example by the help of the 'fuser' command. It's odd to me that that error message above claims that it's an NTFS volume when everything else tell me that it's an ext4 volume. The actual hard drive "Elements" is in fact an NTFS volume. Here's the output of a few commands and configuration files that may be of interest: $ fuser -a / /: 2120r 2159rc 2160rc 2172r 2178rc 2180rc 2188r 2191rc 2200rc 2203rc 2205rc 2206r 2211r 2212r 2214r 2220r 2228r 2234rc 2246rc 2249rc 2254rc 2260rc 2261r 2262r 2277rc 2287rc 2291rc 2311rc 2313rc 2332rc 2334rc 2339rc 2343rc 2344rc 2352rc 2372rc 2389rc 2422r 2490r 2496rc 2501rc 2566r 2573rc 2581rc 2589rc 2592r 2603r 2611rc 2613rc 2615rc 2678rc 2927r 2981r 3104rc 4156rc 4196rc 4206rc 4213rc 4240rc 4297rc 5032rc 7609r 7613r 7648r 9593rc 18829r 18833r 19776r $ sudo df -h Filesystem Size Used Avail Use% Mounted on /dev/sdb6 496G 366G 106G 78% / udev 2.0G 4.0K 2.0G 1% /dev tmpfs 791M 1.5M 790M 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.0G 672K 2.0G 1% /run/shm /dev/sda1 932G 312G 620G 34% /media/Elements /home/solderblob/.Private 496G 366G 106G 78% /home/solderblob /dev/sdb2 188G 100G 88G 54% /media/A2B24EACB24E852F /dev/sdb1 100M 25M 76M 25% /media/System Reserved $ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00093cab Device Boot Start End Blocks Id System /dev/sda1 2048 1953519615 976758784 7 HPFS/NTFS/exFAT Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d9b Device Boot Start End Blocks Id System /dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sdb2 206848 392378768 196085960+ 7 HPFS/NTFS/exFAT /dev/sdb3 392380414 1465147391 536383489 5 Extended /dev/sdb5 1456762880 1465147391 4192256 82 Linux swap / Solaris /dev/sdb6 392380416 1448374271 527996928 83 Linux /dev/sdb7 1448376320 1456758783 4191232 82 Linux swap / Solaris Partition table entries are not in disk order $ cat /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> UUID=77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 defaults 0 1 UUID=F6549CC4549C88CF /media/Elements ntfs-3g users 0 0 $ sudo blkid /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ sudo blkid -c /dev/null (appears to be exactly the same as above) /dev/sda1: LABEL="Elements" UUID="F6549CC4549C88CF" TYPE="ntfs" /dev/sdb1: LABEL="System Reserved" UUID="5CDE130FDE12E156" TYPE="ntfs" /dev/sdb2: UUID="A2B24EACB24E852F" TYPE="ntfs" /dev/sdb6: UUID="77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e" TYPE="ext4" $ mount /dev/sdb6 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /media/Elements type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) /home/solderblob/.Private on /home/solderblob type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=76a47b0175afa48d,ecryptfs_fnek_sig=391b2d8b155215f7) gvfs-fuse-daemon on /home/solderblob/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=solderblob) /dev/sdb2 on /media/A2B24EACB24E852F type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) /dev/sdb1 on /media/System Reserved type fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096) $ ls -a . A2B24EACB24E852F Ubuntu 12.04.1 LTS amd64 .. Elements System Reserved $ cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=2013000k,nr_inodes=503250,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=809872k,mode=755 0 0 /dev/disk/by-uuid/77039a2a-83d4-47a1-8a8c-a2ec4e4dfd0e / ext4 rw,relatime,user_xattr,acl,barrier=1,data=ordered 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 /dev/sda1 /media/Elements fuseblk rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 /home/solderblob/.Private /home/solderblob ecryptfs rw,relatime,ecryptfs_fnek_sig=391b2d8b155215f7,ecryptfs_sig=76a47b0175afa48d,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs 0 0 gvfs-fuse-daemon /home/solderblob/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/sdb2 /media/A2B24EACB24E852F fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 /dev/sdb1 /media/System\040Reserved fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 gvfs-fuse-daemon /root/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0 $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) /dev/sdb6 is mounted. WARNING!!! The filesystem is mounted. If you continue you ***WILL*** cause ***SEVERE*** filesystem damage. Do you really want to continue<n>? no check aborted.

  Read the article

• Android - Create a custom multi-line ListView bound to an ArrayList

  - by Bill Osuch

  The Android HelloListView tutorial shows how to bind a ListView to an array of string objects, but you'll probably outgrow that pretty quickly. This post will show you how to bind the ListView to an ArrayList of custom objects, as well as create a multi-line ListView. Let's say you have some sort of search functionality that returns a list of people, along with addresses and phone numbers. We're going to display that data in three formatted lines for each result, and make it clickable. First, create your new Android project, and create two layout files. Main.xml will probably already be created by default, so paste this in: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"  android:orientation="vertical"  android:layout_width="fill_parent"   android:layout_height="fill_parent">  <TextView   android:layout_height="wrap_content"   android:text="Custom ListView Contents"   android:gravity="center_vertical|center_horizontal"   android:layout_width="fill_parent" />   <ListView    android:id="@+id/ListView01"    android:layout_height="wrap_content"    android:layout_width="fill_parent"/> </LinearLayout> Next, create a layout file called custom_row_view.xml. This layout will be the template for each individual row in the ListView. You can use pretty much any type of layout - Relative, Table, etc., but for this we'll just use Linear: <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"  android:orientation="vertical"  android:layout_width="fill_parent"   android:layout_height="fill_parent">   <TextView android:id="@+id/name"   android:textSize="14sp"   android:textStyle="bold"   android:textColor="#FFFF00"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/>  <TextView android:id="@+id/cityState"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/>  <TextView android:id="@+id/phone"   android:layout_width="wrap_content"   android:layout_height="wrap_content"/> </LinearLayout> Now, add an object called SearchResults. Paste this code in: public class SearchResults {  private String name = "";  private String cityState = "";  private String phone = "";  public void setName(String name) {   this.name = name;  }  public String getName() {   return name;  }  public void setCityState(String cityState) {   this.cityState = cityState;  }  public String getCityState() {   return cityState;  }  public void setPhone(String phone) {   this.phone = phone;  }  public String getPhone() {   return phone;  } } This is the class that we'll be filling with our data, and loading into an ArrayList. Next, you'll need a custom adapter. This one just extends the BaseAdapter, but you could extend the ArrayAdapter if you prefer. public class MyCustomBaseAdapter extends BaseAdapter {  private static ArrayList<SearchResults> searchArrayList;    private LayoutInflater mInflater;  public MyCustomBaseAdapter(Context context, ArrayList<SearchResults> results) {   searchArrayList = results;   mInflater = LayoutInflater.from(context);  }  public int getCount() {   return searchArrayList.size();  }  public Object getItem(int position) {   return searchArrayList.get(position);  }  public long getItemId(int position) {   return position;  }  public View getView(int position, View convertView, ViewGroup parent) {   ViewHolder holder;   if (convertView == null) {    convertView = mInflater.inflate(R.layout.custom_row_view, null);    holder = new ViewHolder();    holder.txtName = (TextView) convertView.findViewById(R.id.name);    holder.txtCityState = (TextView) convertView.findViewById(R.id.cityState);    holder.txtPhone = (TextView) convertView.findViewById(R.id.phone);    convertView.setTag(holder);   } else {    holder = (ViewHolder) convertView.getTag();   }      holder.txtName.setText(searchArrayList.get(position).getName());   holder.txtCityState.setText(searchArrayList.get(position).getCityState());   holder.txtPhone.setText(searchArrayList.get(position).getPhone());   return convertView;  }  static class ViewHolder {   TextView txtName;   TextView txtCityState;   TextView txtPhone;  } } (This is basically the same as the List14.java API demo) Finally, we'll wire it all up in the main class file: public class CustomListView extends Activity {     @Override     public void onCreate(Bundle savedInstanceState) {         super.onCreate(savedInstanceState);         setContentView(R.layout.main);                 ArrayList<SearchResults> searchResults = GetSearchResults();                 final ListView lv1 = (ListView) findViewById(R.id.ListView01);         lv1.setAdapter(new MyCustomBaseAdapter(this, searchResults));                 lv1.setOnItemClickListener(new OnItemClickListener() {          @Override          public void onItemClick(AdapterView<?> a, View v, int position, long id) {           Object o = lv1.getItemAtPosition(position);           SearchResults fullObject = (SearchResults)o;           Toast.makeText(ListViewBlogPost.this, "You have chosen: " + " " + fullObject.getName(), Toast.LENGTH_LONG).show();          }          });     }         private ArrayList<SearchResults> GetSearchResults(){      ArrayList<SearchResults> results = new ArrayList<SearchResults>();            SearchResults sr1 = new SearchResults();      sr1.setName("John Smith");      sr1.setCityState("Dallas, TX");      sr1.setPhone("214-555-1234");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Jane Doe");      sr1.setCityState("Atlanta, GA");      sr1.setPhone("469-555-2587");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Steve Young");      sr1.setCityState("Miami, FL");      sr1.setPhone("305-555-7895");      results.add(sr1);            sr1 = new SearchResults();      sr1.setName("Fred Jones");      sr1.setCityState("Las Vegas, NV");      sr1.setPhone("612-555-8214");      results.add(sr1);            return results;     } } Notice that we first get an ArrayList of SearchResults objects (normally this would be from an external data source...), pass it to the custom adapter, then set up a click listener. The listener gets the item that was clicked, converts it back to a SearchResults object, and does whatever it needs to do. Fire it up in the emulator, and you should wind up with something like this:

  Read the article

• SSAO Distortion

  - by Robert Xu

  I'm currently (attempting) to add SSAO to my engine, except it's...not really work, to say the least. I use a deferred renderer to render my scene. I have four render targets: Albedo, Light, Normal, and Depth. Here are the parameters for all of them (Surface Format, Depth Format): Albedo: 32-bit ARGB, Depth24Stencil8 Light: 32-bit ARGB, None Normal: 32-bit ARGB, None Depth: 8-bit R (Single), Depth24Stencil8 To generate my random noise map for the SSAO, I do the following for each pixel in the noise map: Vector3 v3 = Vector3.Zero; double z = rand.NextDouble() * 2.0 - 1.0; double r = Math.Sqrt(1.0 - z * z); double angle = rand.NextDouble() * MathHelper.TwoPi; v3.X = (float)(r * Math.Cos(angle)); v3.Y = (float)(r * Math.Sin(angle)); v3.Z = (float)z; v3 += offset; v3 *= 0.5f; result[i] = new Color(v3); This is my GBuffer rendering effect: PixelInput RenderGBufferColorVertexShader(VertexInput input) { PixelInput pi = ( PixelInput ) 0; pi.Position = mul(input.Position, WorldViewProjection); pi.Normal = mul(input.Normal, WorldInverseTranspose); pi.Color = input.Color; pi.TPosition = pi.Position; pi.WPosition = input.Position; return pi; } GBufferTarget RenderGBufferColorPixelShader(PixelInput input) { GBufferTarget output = ( GBufferTarget ) 0; float3 position = input.TPosition.xyz / input.TPosition.w; output.Albedo = lerp(float4(1.0f, 1.0f, 1.0f, 1.0f), input.Color, ColorFactor); output.Normal = EncodeNormal(input.Normal); output.Depth = position.z; return output; } And here is the SSAO effect: float4 EncodeNormal(float3 normal) { return float4((normal.xyz * 0.5f) + 0.5f, 0.0f); } float3 DecodeNormal(float4 encoded) { return encoded * 2.0 - 1.0f; } float Intensity; float Size; float2 NoiseOffset; float4x4 ViewProjection; float4x4 ViewProjectionInverse; texture DepthMap; texture NormalMap; texture RandomMap; const float3 samples[16] = { float3(0.01537562, 0.01389096, 0.02276565), float3(-0.0332658, -0.2151698, -0.0660736), float3(-0.06420016, -0.1919067, 0.5329634), float3(-0.05896204, -0.04509097, -0.03611697), float3(-0.1302175, 0.01034653, 0.01543675), float3(0.3168565, -0.182557, -0.01421785), float3(-0.02134448, -0.1056605, 0.00576055), float3(-0.3502164, 0.281433, -0.2245609), float3(-0.00123525, 0.00151868, 0.02614773), float3(0.1814744, 0.05798516, -0.02362876), float3(0.07945167, -0.08302628, 0.4423518), float3(0.321987, -0.05670302, -0.05418307), float3(-0.00165138, -0.00410309, 0.00537362), float3(0.01687791, 0.03189049, -0.04060405), float3(-0.04335613, -0.00530749, 0.06443053), float3(0.8474263, -0.3590308, -0.02318038), }; sampler DepthSampler = sampler_state { Texture = DepthMap; MipFilter = Point; MinFilter = Point; MagFilter = Point; AddressU = Clamp; AddressV = Clamp; AddressW = Clamp; }; sampler NormalSampler = sampler_state { Texture = NormalMap; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; AddressU = Clamp; AddressV = Clamp; AddressW = Clamp; }; sampler RandomSampler = sampler_state { Texture = RandomMap; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; }; struct VertexInput { float4 Position : POSITION0; float2 TextureCoordinates : TEXCOORD0; }; struct PixelInput { float4 Position : POSITION0; float2 TextureCoordinates : TEXCOORD0; }; PixelInput SSAOVertexShader(VertexInput input) { PixelInput pi = ( PixelInput ) 0; pi.Position = input.Position; pi.TextureCoordinates = input.TextureCoordinates; return pi; } float3 GetXYZ(float2 uv) { float depth = tex2D(DepthSampler, uv); float2 xy = uv * 2.0f - 1.0f; xy.y *= -1; float4 p = float4(xy, depth, 1); float4 q = mul(p, ViewProjectionInverse); return q.xyz / q.w; } float3 GetNormal(float2 uv) { return DecodeNormal(tex2D(NormalSampler, uv)); } float4 SSAOPixelShader(PixelInput input) : COLOR0 { float depth = tex2D(DepthSampler, input.TextureCoordinates); float3 position = GetXYZ(input.TextureCoordinates); float3 normal = GetNormal(input.TextureCoordinates); float occlusion = 1.0f; float3 reflectionRay = DecodeNormal(tex2D(RandomSampler, input.TextureCoordinates + NoiseOffset)); for (int i = 0; i < 16; i++) { float3 sampleXYZ = position + reflect(samples[i], reflectionRay) * Size; float4 screenXYZW = mul(float4(sampleXYZ, 1.0f), ViewProjection); float3 screenXYZ = screenXYZW.xyz / screenXYZW.w; float2 sampleUV = float2(screenXYZ.x * 0.5f + 0.5f, 1.0f - (screenXYZ.y * 0.5f + 0.5f)); float frontMostDepthAtSample = tex2D(DepthSampler, sampleUV); if (frontMostDepthAtSample < screenXYZ.z) { occlusion -= 1.0f / 16.0f; } } return float4(occlusion * Intensity * float3(1.0, 1.0, 1.0), 1.0); } technique SSAO { pass Pass0 { VertexShader = compile vs_3_0 SSAOVertexShader(); PixelShader = compile ps_3_0 SSAOPixelShader(); } } However, when I use the effect, I get some pretty bad distortion: Here's the light map that goes with it -- is the static-like effect supposed to be like that? I've noticed that even if I'm looking at nothing, I still get the static-like effect. (you can see it in the screenshot; the top half doesn't have any geometry yet it still has the static-like effect) Also, does anyone have any advice on how to effectively debug shaders?

  Read the article

• Microsoft Business Intelligence Seminar 2011

  - by DavidWimbush

  I was lucky enough to attend the maiden presentation of this at Microsoft Reading yesterday. It was pretty gripping stuff not only because of what was said but also because of what could only be hinted at. Here's what I took away from the day. (Disclaimer: I'm not a BI guru, just a reasonably experienced BI developer, so I may have misunderstood or misinterpreted a few things. Particularly when so much of the talk was about the vision and subtle hints of what is coming. Please comment if you think I've got anything wrong. I'm also not going to even try to cover Master Data Services as I struggled to imagine how you would actually use it.) I was a bit worried when I learned that the whole day was going to be presented by one guy but Rafal Lukawiecki is a very engaging speaker. He's going to be presenting this about 20 times around the world over the coming months. If you get a chance to hear him speak, I say go for it. No doubt some of the hints will become clearer as Denali gets closer to RTM. Firstly, things are definitely happening in the SQL Server Reporting and BI world. Traditionally IT would build a data warehouse, then cubes on top of that, and then publish them in a structured and controlled way. But, just as with many IT projects in general, by the time it's finished the business has moved on and the system no longer meets their requirements. This not sustainable and something more agile is needed but there has to be some control. Apparently we're going to be hearing the catchphrase 'Balancing agility with control' a lot. More users want more access to more data. Can they define what they want? Of course not, but they'll recognise it when they see it. It's estimated that only 28% of potential BI users have meaningful access to the data they need, so there is a real pent-up demand. The answer looks like: give them some self-service tools so they can experiment and see what works, and then IT can help to support the results. It's estimated that 32% of Excel users are comfortable with its analysis tools such as pivot tables. It's the power user's preferred tool. Why fight it? That's why PowerPivot is an Excel add-in and that's why they released a Data Mining add-in for it as well. It does appear that the strategy is going to be to use Reporting Services (in SharePoint mode), PowerPivot, and possibly something new (smiles and hints but no details) to create reports and explore data. Everything will be published and managed in SharePoint which gives users the ability to mash-up, share and socialise what they've found out. SharePoint also gives IT tools to understand what people are looking at and where to concentrate effort. If PowerPivot report X becomes widely used, it's time to check that it shows what they think it does and perhaps get it a bit more under central control. There was more SharePoint detail that went slightly over my head regarding where Excel Services and Excel Web Application fit in, the differences between them, and the suggestion that it is likely they will one day become one (but not in the immediate future). That basic pattern is set to be expanded upon by further exploiting Vertipaq (the columnar indexing engine that enables PowerPivot to store and process a lot of data fast and in a small memory footprint) to provide scalability 'from the desktop to the data centre', and some yet to be detailed advances in 'frictionless deployment' (part of which is about making the difference between local and the cloud pretty much irrelevant). Excel looks like becoming Microsoft's primary BI client. It already has: the ability to consume cubes strong visualisation tools slicers (which are part of Excel not PowerPivot) a data mining add-in PowerPivot A major hurdle for self-service BI is presenting the data in a consumable format. You can't just give users PowerPivot and a server with a copy of the OLTP database(s). Building cubes is labour intensive and doesn't always give the user what they need. This is where the BI Semantic Model (BISM) comes in. I gather it's a layer of metadata you define that can combine multiple data sources (and types of data source) into a clear 'interface' that users can work with. It comes with a new query language called DAX. SSAS cubes are unlikely to go away overnight because, with their pre-calculated results, they are still the most efficient way to work with really big data sets. A few other random titbits that came up: Reporting Services is going to get some good new stuff in Denali. Keep an eye on www.projectbotticelli.com for the slides. You can also view last year's seminar sessions which covered a lot of the same ground as far as the overall strategy is concerned. They plan to add more material as Denali's features are publicly exposed. Check out the PASS keynote address for a showing of Yahoo's SQL BI servers. Apparently they wheeled the rack out on stage still plugged in and running! Check out the Excel 2010 Data Mining Add-Ins. 32 bit only at present but 64 bit is on the way. There are lots of data sets, many of them free, at the Windows Azure Marketplace Data Market (where you can also get ESRI shape files). If you haven't already seen it, have a look at the Silverlight Pivot Viewer (http://weblogs.asp.net/scottgu/archive/2010/06/29/silverlight-pivotviewer-now-available.aspx). The Bing Maps Data Connector is worth a look if you're into spatial stuff (http://www.bing.com/community/site_blogs/b/maps/archive/2010/07/13/data-connector-sql-server-2008-spatial-amp-bing-maps.aspx).  

  Read the article

• class hierarchy design for small java project

  - by user523956

  I have written a java code which does following:- Main goal is to fetch emails from (inbox, spam) folders and store them in database. It fetches emails from gmail,gmx,web.de,yahoo and Hotmail. Following attributes are stored in mysql database. Slno, messagedigest, messageid, foldername, dateandtime, receiver, sender, subject, cc, size and emlfile. For gmail,gmy and web.de, I have used javamail API, because email form it can be fetched with IMAP. For yahoo and hotmail, I have used html parser and httpclient to fetch emails form spam folder and for inbox folder, I have used pop3 javamail API. I want to have proper class hierarchy which makes my code efficient and easily reusable. As of now I have designed class hierarchy as below: I am sure it can still be improved. So I would like to have different opinions on it. I have following classes and methods as of now. MainController:- Here I pass emailid, password and foldername from which emails have to be fetched. Abstract Class :-EmailProtocol Abstract Methods of it (All methods except executeParser contains method definition):- connectImap() // used by gmx,gmail and web.de email ids connectPop3() // used by hotmail and yahoo to fetch emails of inbox folder createMessageDigest // used by every email provider(gmx, gmail,web.de,yahoo,hotmail) establishDBConnection // used by every email emailAlreadyExists // used by every email which checks whether email already exists in db or not, if not then store it. storeemailproperties // used by every email to store emails properties to mysql database executeParser // nothing written in it. Overwridden and used by just hotmail and yahoo to fetch emails form spam folder. Imap extends EmailProtocol (nothing in it. But I have to have it to access methods of EmailProtocol. This is used to fetch emails from gmail,gmx and web.de) I know this is really a bad way but don't know how to do it other way. Hotmsil extends EmailProtocol Methods:- executeParser() :- This is used by just hotmail email id. fetchjunkemails() :- This is also very specific for only hotmail email id. Yahoo extends EmailProtocol Methods:- executeParser() storeEmailtotemptable() MoveEmailtoInbox() getFoldername() nullorEquals() All above methods are specific for yahoo email id. public DateTimeFormat(class) format() //this formats datetime of gmax,gmail and web.de emails. formatYahoodate //this formats datetime of yahoo email. formatHotmaildate // this formats datetime of hotmail email. public StringFormat ConvertStreamToString() // Accessed by every class except DateTimeFormat class. formatFromTo() // Accessed by every class except DateTimeFormat class. public Class CheckDatabaseExistance public static void checkForDatabaseTablesAvailability() (This method checks at the beginnning whether database and required tables exist in mysql or not. if not it creates them) Please see code of my MainController class so that You can have an idea about how I use different classes. public class MainController { public static void main(String[] args) throws Exception { ArrayList<String> web_de_folders = new ArrayList<String>(); web_de_folders.add("INBOX"); web_de_folders.add("Unbekannt"); web_de_folders.add("Spam"); web_de_folders.add("OUTBOX"); web_de_folders.add("SENT"); web_de_folders.add("DRAFTS"); web_de_folders.add("TRASH"); web_de_folders.add("Trash"); ArrayList<String> gmx_folders = new ArrayList<String>(); gmx_folders.add("INBOX"); gmx_folders.add("Archiv"); gmx_folders.add("Entwürfe"); gmx_folders.add("Gelöscht"); gmx_folders.add("Gesendet"); gmx_folders.add("Spamverdacht"); gmx_folders.add("Trash"); ArrayList<String> gmail_folders = new ArrayList<String>(); gmail_folders.add("Inbox"); gmail_folders.add("[Google Mail]/Spam"); gmail_folders.add("[Google Mail]/Trash"); gmail_folders.add("[Google Mail]/Sent Mail"); ArrayList<String> pop3_folders = new ArrayList<String>(); pop3_folders.add("INBOX"); CheckDatabaseExistance.checkForDatabaseTablesAvailability(); EmailProtocol imap = new Imap(); System.out.println("CHECKING FOR NEW EMAILS IN WEB.DE...(IMAP)"); System.out.println("*********************************************************************************"); imap.connectImap("[email protected]", "pwd", web_de_folders); System.out.println("\nCHECKING FOR NEW EMAILS IN GMX.DE...(IMAP)"); System.out.println("*********************************************************************************"); imap.connectImap("[email protected]", "pwd", gmx_folders); System.out.println("\nCHECKING FOR NEW EMAILS IN GMAIL...(IMAP)"); System.out.println("*********************************************************************************"); imap.connectImap("[email protected]", "pwd", gmail_folders); EmailProtocol yahoo = new Yahoo(); Yahoo y=new Yahoo(); System.out.println("\nEXECUTING YAHOO PARSER"); System.out.println("*********************************************************************************"); y.executeParser("http://de.mc1321.mail.yahoo.com/mc/welcome?ymv=0","[email protected]","pwd"); System.out.println("\nCHECKING FOR NEW EMAILS IN INBOX OF YAHOO (POP3)"); System.out.println("*********************************************************************************"); yahoo.connectPop3("[email protected]","pwd",pop3_folders); System.out.println("\nCHECKING FOR NEW EMAILS IN INBOX OF HOTMAIL (POP3)"); System.out.println("*********************************************************************************"); yahoo.connectPop3("[email protected]","pwd",pop3_folders); EmailProtocol hotmail = new Hotmail(); Hotmail h=new Hotmail(); System.out.println("\nEXECUTING HOTMAIL PARSER"); System.out.println("*********************************************************************************"); h.executeParser("https://login.live.com/ppsecure/post.srf","[email protected]","pwd"); } } I have kept DatetimeFormat and StringFormat class public so that I can access its public methods by just (DatetimeFormat.formatYahoodate for e.g. from different methods). This is the first time I have developed something in java. It serves its purpose but of course code is still not so efficient I think. I need your suggestions on this project.

  Read the article

• Changing CSS with jQuery syntax in Silverlight using jLight

  - by Timmy Kokke

  Lately I’ve ran into situations where I had to change elements or had to request a value in the DOM from Silverlight. jLight, which was introduced in an earlier article, can help with that. jQuery offers great ways to change CSS during runtime. Silverlight can access the DOM, but it isn’t as easy as jQuery. All examples shown in this article can be looked at in this online demo. The code can be downloaded here.   Part 1: The easy stuff Selecting and changing properties is pretty straight forward. Setting the text color in all <B> </B> elements can be done using the following code:   jQuery.Select("b").Css("color", "red");   The Css() method is an extension method on jQueryObject which is return by the jQuery.Select() method. The Css() method takes to parameters. The first is the Css style property. All properties used in Css can be entered in this string. The second parameter is the value you want to give the property. In this case the property is “color” and it is changed to “red”. To specify which element you want to select you can add a :selector parameter to the Select() method as shown in the next example.   jQuery.Select("b:first").Css("font-family", "sans-serif");   The “:first” pseudo-class selector selects only the first element. This example changes the “font-family” property of the first <B></B> element to “sans-serif”. To make use of intellisense in Visual Studio I’ve added a extension methods to help with the pseudo-classes. In the example below the “font-weight” of every “Even” <LI></LI> is set to “bold”.   jQuery.Select("li".Even()).Css("font-weight", "bold");   Because the Css() extension method returns a jQueryObject it is possible to chain calls to Css(). The following example show setting the “color”, “background-color” and the “font-size” of all headers in one go.   jQuery.Select(":header").Css("color", "#12FF70") .Css("background-color", "yellow") .Css("font-size", "25px");   Part 2: More complex stuff In only a few cases you need to change only one style property. More often you want to change an entire set op style properties all in one go.  You could chain a lot of Css() methods together. A better way is to add a class to a stylesheet and define all properties in there. With the AddClass() method you can set a style class to a set of elements. This example shows how to add the “demostyle” class to all <B></B> in the document.   jQuery.Select("b").AddClass("demostyle");   Removing the class works in the same way:   jQuery.Select("b").RemoveClass("demostyle");   jLight is build for interacting with to the DOM from Silverlight using jQuery. A jQueryObjectCss object can be used to define different sets of style properties in Silverlight. The over 60 most common Css style properties are defined in the jQueryObjectCss class. A string indexer can be used to access all style properties ( CssObject1[“background-color”] equals CssObject1.BackgroundColor). In the code below, two jQueryObjectCss objects are defined and instantiated.   private jQueryObjectCss CssObject1; private jQueryObjectCss CssObject2;   public Demo2() { CssObject1 = new jQueryObjectCss { BackgroundColor = "Lime", Color="Black", FontSize = "12pt", FontFamily = "sans-serif", FontWeight = "bold", MarginLeft = 150, LineHeight = "28px", Border = "Solid 1px #880000" }; CssObject2 = new jQueryObjectCss { FontStyle = "Italic", FontSize = "48", Color = "#225522" }; InitializeComponent(); }   Now instead of chaining to set all different properties you can just pass one of the jQueryObjectCss objects to the Css() method. In this case all <LI></LI> elements are set to match this object.   jQuery.Select("li").Css(CssObject1); When using the jQueryObjectCss objects chaining is still possible. In the following example all headers are given a blue backgroundcolor and the last is set to match CssObject2.   jQuery.Select(":header").Css(new jQueryObjectCss{BackgroundColor = "Blue"}) .Eq(-1).Css(CssObject2);   Part 3: The fun stuff Having Silverlight call JavaScript and than having JavaScript to call Silverlight requires a lot of plumbing code. Everything has to be registered and strings are passed back and forth to execute the JavaScript. jLight makes this kind of stuff so easy, it becomes fun to use. In a lot of situations jQuery can call a function to decide what to do, setting a style class based on complex expressions for example. jLight can do the same, but the callback methods are defined in Silverlight. This example calls the function() method for each <LI></LI> element. The callback method has to take a jQueryObject, an integer and a string as parameters. In this case jLight differs a bit from the actual jQuery implementation. jQuery uses only the index and the className parameters. A jQueryObject is added to make it simpler to access the attributes and properties of the element. If the text of the listitem starts with a ‘D’ or an ‘M’ the class is set. Otherwise null is returned and nothing happens.   private void button1_Click(object sender, RoutedEventArgs e) { jQuery.Select("li").AddClass(function); }   private string function(jQueryObject obj, int index, string className) { if (obj.Text[0] == 'D' || obj.Text[0] == 'M') return "demostyle"; return null; }   The last thing I would like to demonstrate uses even more Silverlight and less jLight, but demonstrates the power of the combination. Animating a style property using a Storyboard with easing functions. First a dependency property is defined. In this case it is a double named Intensity. By handling the changed event the color is set using jQuery.   public double Intensity { get { return (double)GetValue(IntensityProperty); } set { SetValue(IntensityProperty, value); } }   public static readonly DependencyProperty IntensityProperty = DependencyProperty.Register("Intensity", typeof(double), typeof(Demo3), new PropertyMetadata(0.0, IntensityChanged));   private static void IntensityChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { var i = (byte)(double)e.NewValue; jQuery.Select("span").Css("color", string.Format("#{0:X2}{0:X2}{0:X2}", i)); }   An animation has to be created. This code defines a Storyboard with one keyframe that uses a bounce ease as an easing function. The animation is set to target the Intensity dependency property defined earlier.   private Storyboard CreateAnimation(double value) { Storyboard storyboard = new Storyboard(); var da = new DoubleAnimationUsingKeyFrames(); var d = new EasingDoubleKeyFrame { EasingFunction = new BounceEase(), KeyTime = KeyTime.FromTimeSpan(TimeSpan.FromSeconds(1.0)), Value = value }; da.KeyFrames.Add(d); Storyboard.SetTarget(da, this); Storyboard.SetTargetProperty(da, new PropertyPath(Demo3.IntensityProperty)); storyboard.Children.Add(da); return storyboard; }   Initially the Intensity is set to 128 which results in a gray color. When one of the buttons is pressed, a new animation is created an played. One to animate to black, and one to animate to white.   public Demo3() { InitializeComponent(); Intensity = 128; }   private void button2_Click(object sender, RoutedEventArgs e) { CreateAnimation(255).Begin(); }   private void button3_Click(object sender, RoutedEventArgs e) { CreateAnimation(0).Begin(); }   Conclusion As you can see jLight can make the life of a Silverlight developer a lot easier when accessing the DOM. Almost all jQuery functions that are defined in jLight use the same constructions as described above. I’ve tried to stay as close as possible to the real jQuery. Having JavaScript perform callbacks to Silverlight using jLight will be described in more detail in a future tutorial about AJAX or eventing.

  Read the article

• More Fun with C# Iterators and Generators

  - by James Michael Hare

  In my last post, I talked quite a bit about iterators and how they can be really powerful tools for filtering a list of items down to a subset of items.  This had both pros and cons over returning a full collection, which, in summary, were:   Pros: If traversal is only partial, does not have to visit rest of collection. If evaluation method is costly, only incurs that cost on elements visited. Adds little to no garbage collection pressure.    Cons: Very slight performance impact if you know caller will always consume all items in collection. And as we saw in the last post, that con for the cost was very, very small and only really became evident on very tight loops consuming very large lists completely.    One of the key items to note, though, is the garbage!  In the traditional (return a new collection) method, if you have a 1,000,000 element collection, and wish to transform or filter it in some way, you have to allocate space for that copy of the collection.  That is, say you have a collection of 1,000,000 items and you want to double every item in the collection.  Well, that means you have to allocate a collection to hold those 1,000,000 items to return, which is a lot especially if you are just going to use it once and toss it.   Iterators, though, don't have this problem.  Each time you visit the node, it would return the doubled value of the node (in this example) and not allocate a second collection of 1,000,000 doubled items.  Do you see the distinction?  In both cases, we're consuming 1,000,000 items.  But in one case we pass back each doubled item which is just an int (for example's sake) on the stack and in the other case, we allocate a list containing 1,000,000 items which then must be garbage collected.   So iterators in C# are pretty cool, eh?  Well, here's one more thing a C# iterator can do that a traditional "return a new collection" transformation can't!   It can return **unbounded** collections!   I know, I know, that smells a lot like an infinite loop, eh?  Yes and no.  Basically, you're relying on the caller to put the bounds on the list, and as long as the caller doesn't you keep going.  Consider this example:   public static class Fibonacci {     // returns the infinite fibonacci sequence     public static IEnumerable<int> Sequence()     {         int iteration = 0;         int first = 1;         int second = 1;         int current = 0;         while (true)         {             if (iteration++ < 2)             {                 current = 1;             }             else             {                 current = first + second;                 second = first;                 first = current;             }             yield return current;         }     } }   Whoa, you say!  Yes, that's an infinite loop!  What the heck is going on there?  Yes, that was intentional.  Would it be better to have a fibonacci sequence that returns only a specific number of items?  Perhaps, but that wouldn't give you the power to defer the execution to the caller.   The beauty of this function is it is as infinite as the sequence itself!  The fibonacci sequence is unbounded, and so is this method.  It will continue to return fibonacci numbers for as long as you ask for them.  Now that's not something you can do with a traditional method that would return a collection of ints representing each number.  In that case you would eventually run out of memory as you got to higher and higher numbers.  This method, though, never runs out of memory.   Now, that said, you do have to know when you use it that it is an infinite collection and bound it appropriately.  Fortunately, Linq provides a lot of these extension methods for you!   Let's say you only want the first 10 fibonacci numbers:       foreach(var fib in Fibonacci.Sequence().Take(10))     {         Console.WriteLine(fib);     }   Or let's say you only want the fibonacci numbers that are less than 100:       foreach(var fib in Fibonacci.Sequence().TakeWhile(f => f < 100))     {         Console.WriteLine(fib);     }   So, you see, one of the nice things about iterators is their power to work with virtually any size (even infinite) collections without adding the garbage collection overhead of making new collections.    You can also do fun things like this to make a more "fluent" interface for for loops:   // A set of integer generator extension methods public static class IntExtensions {     // Begins counting to inifity, use To() to range this.     public static IEnumerable<int> Every(this int start)     {         // deliberately avoiding condition because keeps going         // to infinity for as long as values are pulled.         for (var i = start; ; ++i)         {             yield return i;         }     }     // Begins counting to infinity by the given step value, use To() to     public static IEnumerable<int> Every(this int start, int byEvery)     {         // deliberately avoiding condition because keeps going         // to infinity for as long as values are pulled.         for (var i = start; ; i += byEvery)         {             yield return i;         }     }     // Begins counting to inifity, use To() to range this.     public static IEnumerable<int> To(this int start, int end)     {         for (var i = start; i <= end; ++i)         {             yield return i;         }     }     // Ranges the count by specifying the upper range of the count.     public static IEnumerable<int> To(this IEnumerable<int> collection, int end)     {         return collection.TakeWhile(item => item <= end);     } }   Note that there are two versions of each method.  One that starts with an int and one that starts with an IEnumerable<int>.  This is to allow more power in chaining from either an existing collection or from an int.  This lets you do things like:   // count from 1 to 30 foreach(var i in 1.To(30)) {     Console.WriteLine(i); }     // count from 1 to 10 by 2s foreach(var i in 0.Every(2).To(10)) {     Console.WriteLine(i); }     // or, if you want an infinite sequence counting by 5s until something inside breaks you out... foreach(var i in 0.Every(5)) {     if (someCondition)     {         break;     }     ... }     Yes, those are kinda play functions and not particularly useful, but they show some of the power of generators and extension methods to form a fluid interface.   So what do you think?  What are some of your favorite generators and iterators?

  Read the article

• Contracting as a Software Developer in the UK

  - by Frez

  Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Having had some 15 years’ experience of working as a software contractor, I am often asked by developers who work as permanent employees (permies) about the pros and cons of working as a software consultant through my own limited company and whether the move would be a good one for them. Whilst it is possible to contract using other financial vehicles such as umbrella companies, this article will only consider limited companies as that is what I have experience of using. Contracting or consultancy requires a different mind-set from being a permanent member of staff, and not all developers are capable of this shift in attitude. Whilst you can look forward to an increase in the money you take home, there are real risks and expenses you would not normally be exposed to as a permie. So let us have a look at the pros and cons: Pros: More money There is no doubt that whilst you are working on contracts you will earn significantly more than you would as a permanent employee. Furthermore, working through a limited company is more tax efficient. Less politics You really have no need to involve yourself in office politics. When the end of the day comes you can go home and not think or worry about the power struggles within the company you are contracted to. Your career progression is not tied to the company. Expenses from gross income All your expenses of trading as a business will come out of your company’s gross income, i.e. before tax. This covers travelling expenses provided you have not been at the same client/location for more than two years, internet subscriptions, professional subscriptions, software, hardware, accountancy services and so on. Cons: Work is more transient Contracts typically range from a couple of weeks to a year, although will most likely start at 3 months. However, most contracts are extended either because the project you have been brought in to help with takes longer to deliver than expected, the client decides they can use you on other aspects of the project, or the client decides they would like to use you on other projects. The temporary nature of the work means that you will have down-time between contracts while you secure new opportunities during which time your company will have no income. You may need to attend several interviews before securing a new contract. Accountancy expenses Your company is a separate entity and there are accountancy requirements which, unless you like paperwork, means your company will need to appoint an accountant to prepare your company’s accounts. It may also be worth purchasing some accountancy software, so talk to your accountant about this as they may prefer you to use a particular software package so they can integrate it with their systems. VAT You will need to register your company for VAT. This is tax neutral for you as the VAT you charge your clients you will pass onto the government less any VAT you are reclaiming from expenses, but it is additional paperwork to undertake each quarter. It is worth checking out the Fixed Rate VAT Scheme that is available, particularly after the initial expenses of setting up your company are over. No training Clients take you on based on your skills, not to train you when they will lose that investment at the end of the contract, so understand that it is unlikely you will receive any training funded by a client. However, learning new skills during a contract is possible and you may choose to accept a contract on a lower rate if this is guaranteed as it will help secure future contracts. No financial extras You will have no free pension, life, accident, sickness or medical insurance unless you choose to purchase them yourself. A financial advisor can give you all the necessary advice in this area, and it is worth taking seriously. A year after I started as a consultant I contracted a serious illness, this kept me off work for over two months, my client was very understanding and it could have been much worse, so it is worth considering what your options might be in the case of illness, death and retirement. Agencies Whilst it is possible to work directly for end clients there are pros and cons of working through an agency.  The main advantage is cash flow, you invoice the agency and they typically pay you within a week, whereas working directly for a client could have you waiting up to three months to be paid. The downside of working for agencies, especially in the current difficult times, is that they may go out of business and you then have difficulty getting the money you are owed. Tax investigation It is possible that the Inland Revenue may decide to investigate your company for compliance with tax law. Insurance is available to cover you for this. My personal recommendation would be to join the PCG as this insurance is included as a benefit of membership, Professional Indemnity Some agencies require that you are covered by professional indemnity insurance; this is a cost you would not incur as a permie. Travel Unless you live in an area that has an abundance of opportunities, such as central London, it is likely that you will be travelling further, longer and with more expense than if you were permanently employed at a local company. This not only affects you monetarily, but also your quality of life and the ability to keep fit and healthy. Obtaining finance If you want to secure a mortgage on a property it can be more difficult or expensive, especially if you do not have three years of audited accounts to show a mortgage lender.   Caveat This post is my personal opinion and should not be used as a definitive guide or recommendation to contracting and whether it is suitable for you as an individual, i.e. I accept no responsibility if you decide to take up contracting based on this post and you fare badly for whatever reason.

  Read the article

• The SSIS tuning tip that everyone misses

  - by Rob Farley

  I know that everyone misses this, because I’m yet to find someone who doesn’t have a bit of an epiphany when I describe this. When tuning Data Flows in SQL Server Integration Services, people see the Data Flow as moving from the Source to the Destination, passing through a number of transformations. What people don’t consider is the Source, getting the data out of a database. Remember, the source of data for your Data Flow is not your Source Component. It’s wherever the data is, within your database, probably on a disk somewhere. You need to tune your query to optimise it for SSIS, and this is what most people fail to do. I’m not suggesting that people don’t tune their queries – there’s plenty of information out there about making sure that your queries run as fast as possible. But for SSIS, it’s not about how fast your query runs. Let me say that again, but in bolder text: The speed of an SSIS Source is not about how fast your query runs. If your query is used in a Source component for SSIS, the thing that matters is how fast it starts returning data. In particular, those first 10,000 rows to populate that first buffer, ready to pass down the rest of the transformations on its way to the Destination. Let’s look at a very simple query as an example, using the AdventureWorks database: We’re picking the different Weight values out of the Product table, and it’s doing this by scanning the table and doing a Sort. It’s a Distinct Sort, which means that the duplicates are discarded. It'll be no surprise to see that the data produced is sorted. Obvious, I know, but I'm making a comparison to what I'll do later. Before I explain the problem here, let me jump back into the SSIS world... If you’ve investigated how to tune an SSIS flow, then you’ll know that some SSIS Data Flow Transformations are known to be Blocking, some are Partially Blocking, and some are simply Row transformations. Take the SSIS Sort transformation, for example. I’m using a larger data set for this, because my small list of Weights won’t demonstrate it well enough. Seven buffers of data came out of the source, but none of them could be pushed past the Sort operator, just in case the last buffer contained the data that would be sorted into the first buffer. This is a blocking operation. Back in the land of T-SQL, we consider our Distinct Sort operator. It’s also blocking. It won’t let data through until it’s seen all of it. If you weren’t okay with blocking operations in SSIS, why would you be happy with them in an execution plan? The source of your data is not your OLE DB Source. Remember this. The source of your data is the NCIX/CIX/Heap from which it’s being pulled. Picture it like this... the data flowing from the Clustered Index, through the Distinct Sort operator, into the SELECT operator, where a series of SSIS Buffers are populated, flowing (as they get full) down through the SSIS transformations. Alright, I know that I’m taking some liberties here, because the two queries aren’t the same, but consider the visual. The data is flowing from your disk and through your execution plan before it reaches SSIS, so you could easily find that a blocking operation in your plan is just as painful as a blocking operation in your SSIS Data Flow. Luckily, T-SQL gives us a brilliant query hint to help avoid this. OPTION (FAST 10000) This hint means that it will choose a query which will optimise for the first 10,000 rows – the default SSIS buffer size. And the effect can be quite significant. First let’s consider a simple example, then we’ll look at a larger one. Consider our weights. We don’t have 10,000, so I’m going to use OPTION (FAST 1) instead. You’ll notice that the query is more expensive, using a Flow Distinct operator instead of the Distinct Sort. This operator is consuming 84% of the query, instead of the 59% we saw from the Distinct Sort. But the first row could be returned quicker – a Flow Distinct operator is non-blocking. The data here isn’t sorted, of course. It’s in the same order that it came out of the index, just with duplicates removed. As soon as a Flow Distinct sees a value that it hasn’t come across before, it pushes it out to the operator on its left. It still has to maintain the list of what it’s seen so far, but by handling it one row at a time, it can push rows through quicker. Overall, it’s a lot more work than the Distinct Sort, but if the priority is the first few rows, then perhaps that’s exactly what we want. The Query Optimizer seems to do this by optimising the query as if there were only one row coming through: This 1 row estimation is caused by the Query Optimizer imagining the SELECT operation saying “Give me one row” first, and this message being passed all the way along. The request might not make it all the way back to the source, but in my simple example, it does. I hope this simple example has helped you understand the significance of the blocking operator. Now I’m going to show you an example on a much larger data set. This data was fetching about 780,000 rows, and these are the Estimated Plans. The data needed to be Sorted, to support further SSIS operations that needed that. First, without the hint. ...and now with OPTION (FAST 10000): A very different plan, I’m sure you’ll agree. In case you’re curious, those arrows in the top one are 780,000 rows in size. In the second, they’re estimated to be 10,000, although the Actual figures end up being 780,000. The top one definitely runs faster. It finished several times faster than the second one. With the amount of data being considered, these numbers were in minutes. Look at the second one – it’s doing Nested Loops, across 780,000 rows! That’s not generally recommended at all. That’s “Go and make yourself a coffee” time. In this case, it was about six or seven minutes. The faster one finished in about a minute. But in SSIS-land, things are different. The particular data flow that was consuming this data was significant. It was being pumped into a Script Component to process each row based on previous rows, creating about a dozen different flows. The data flow would take roughly ten minutes to run – ten minutes from when the data first appeared. The query that completes faster – chosen by the Query Optimizer with no hints, based on accurate statistics (rather than pretending the numbers are smaller) – would take a minute to start getting the data into SSIS, at which point the ten-minute flow would start, taking eleven minutes to complete. The query that took longer – chosen by the Query Optimizer pretending it only wanted the first 10,000 rows – would take only ten seconds to fill the first buffer. Despite the fact that it might have taken the database another six or seven minutes to get the data out, SSIS didn’t care. Every time it wanted the next buffer of data, it was already available, and the whole process finished in about ten minutes and ten seconds. When debugging SSIS, you run the package, and sit there waiting to see the Debug information start appearing. You look for the numbers on the data flow, and seeing operators going Yellow and Green. Without the hint, I’d sit there for a minute. With the hint, just ten seconds. You can imagine which one I preferred. By adding this hint, it felt like a magic wand had been waved across the query, to make it run several times faster. It wasn’t the case at all – but it felt like it to SSIS.

  Read the article

• Get Application Title from Windows Phone

  - by psheriff

  In a Windows Phone application that I am currently developing I needed to be able to retrieve the Application Title of the phone application. You can set the Deployment Title in the Properties of your Windows Phone Application, however getting to this value programmatically can be a little tricky. This article assumes that you have Visual Studio 2010 and the Windows Phone tools installed along with it. The Windows Phone tools must be downloaded separately and installed with Visual Studio2010. You may also download the free Visual Studio2010 Express for Windows Phone developer environment. The WMAppManifest.xml File First off you need to understand that when you set the Deployment Title in the Properties windows of your Windows Phone application, this title actually gets stored into an XML file located under the \Properties folder of your application. This XML file is named WMAppManifest.xml. A portion of this file is shown in the following listing. <?xml version="1.0" encoding="utf-8"?><Deployment  http://schemas.microsoft.com/windowsphone/2009/deployment"http://schemas.microsoft.com/windowsphone/2009/deployment"  AppPlatformVersion="7.0">  <App xmlns=""       ProductID="{71d20842-9acc-4f2f-b0e0-8ef79842ea53}"       Title="Mobile Time Track"       RuntimeType="Silverlight"       Version="1.0.0.0"       Genre="apps.normal"       Author="PDSA, Inc."       Description="Mobile Time Track"       Publisher="PDSA, Inc."> ... ...  </App></Deployment> Notice the “Title” attribute in the <App> element in the above XML document. This is the value that gets set when you modify the Deployment Title in your Properties Window of your Phone project. The only value you can set from the Properties Window is the Title. All of the other attributes you see here must be set by going into the XML file and modifying them directly. Note that this information duplicates some of the information that you can also set from the Assembly Information… button in the Properties Window. Why Microsoft did not just use that information, I don’t know. Reading Attributes from WMAppManifest I searched all over the namespaces and classes within the Windows Phone DLLs and could not find a way to read the attributes within the <App> element. Thus, I had to resort to good old fashioned XML processing. First off I created a WinPhoneCommon class and added two static methods as shown in the snippet below: public class WinPhoneCommon{  /// <summary>  /// Returns the Application Title   /// from the WMAppManifest.xml file  /// </summary>  /// <returns>The application title</returns>  public static string GetApplicationTitle()  {    return GetWinPhoneAttribute("Title");  }   /// <summary>  /// Returns the Application Description   /// from the WMAppManifest.xml file  /// </summary>  /// <returns>The application description</returns>  public static string GetApplicationDescription()  {    return GetWinPhoneAttribute("Description");  }   ... GetWinPhoneAttribute method here ...} In your Windows Phone application you can now simply call WinPhoneCommon.GetApplicationTitle() or WinPhone.GetApplicationDescription() to retrieve the Title or Description properties from the WMAppManifest.xml file respectively. You notice that each of these methods makes a call to the GetWinPhoneAttribute method. This method is shown in the following code snippet: /// <summary>/// Gets an attribute from the Windows Phone WMAppManifest.xml file/// To use this method, add a reference to the System.Xml.Linq DLL/// </summary>/// <param name="attributeName">The attribute to read</param>/// <returns>The Attribute's Value</returns>private static string GetWinPhoneAttribute(string attributeName){  string ret = string.Empty;   try  {    XElement xe = XElement.Load("WMAppManifest.xml");    var attr = (from manifest in xe.Descendants("App")                select manifest).SingleOrDefault();    if (attr != null)      ret = attr.Attribute(attributeName).Value;  }  catch  {    // Ignore errors in case this method is called    // from design time in VS.NET  }   return ret;} I love using the new LINQ to XML classes contained in the System.Xml.Linq.dll. When I did a Bing search the only samples I found for reading attribute information from WMAppManifest.xml used either an XmlReader or XmlReaderSettings objects. These are fine and work, but involve a little extra code. Instead of using these, I added a reference to the System.Xml.Linq.dll, then added two using statements to the top of the WinPhoneCommon class: using System.Linq;using System.Xml.Linq; Now, with just a few lines of LINQ to XML code you can read to the App element and extract the appropriate attribute that you pass into the GetWinPhoneAttribute method. Notice that I added a little bit of exception handling code in this method. I ignore the exception in case you call this method in the Loaded event of a user control. In design-time you cannot access the WMAppManifest file and thus an exception would be thrown. Summary In this article you learned how to retrieve the attributes from the WMAppManifest.xml file. I use this technique to grab information that I would otherwise have to hard-code in my application. Getting the Title or Description for your Windows Phone application is easy with just a little bit of LINQ to XML code. NOTE: You can download the complete sample code at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "Get Application Title from Windows Phone" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.  

  Read the article

• Setting useLegacyV2RuntimeActivationPolicy At Runtime

  - by Reed

  Version 4.0 of the .NET Framework included a new CLR which is almost entirely backwards compatible with the 2.0 version of the CLR.  However, by default, mixed-mode assemblies targeting .NET 3.5sp1 and earlier will fail to load in a .NET 4 application.  Fixing this requires setting useLegacyV2RuntimeActivationPolicy in your app.Config for the application.  While there are many good reasons for this decision, there are times when this is extremely frustrating, especially when writing a library.  As such, there are (rare) times when it would be beneficial to set this in code, at runtime, as well as verify that it’s running correctly prior to receiving a FileLoadException. Typically, loading a pre-.NET 4 mixed mode assembly is handled simply by changing your app.Config file, and including the relevant attribute in the startup element: <?xml version="1.0" encoding="utf-8" ?> <configuration> <startup useLegacyV2RuntimeActivationPolicy="true"> <supportedRuntime version="v4.0"/> </startup> </configuration> .csharpcode { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { background-color: #ffffff; font-family: consolas, "Courier New", courier, monospace; color: black; font-size: small } .csharpcode pre { margin: 0em } .csharpcode .rem { color: #008000 } .csharpcode .kwrd { color: #0000ff } .csharpcode .str { color: #006080 } .csharpcode .op { color: #0000c0 } .csharpcode .preproc { color: #cc6633 } .csharpcode .asp { background-color: #ffff00 } .csharpcode .html { color: #800000 } .csharpcode .attr { color: #ff0000 } .csharpcode .alt { background-color: #f4f4f4; margin: 0em; width: 100% } .csharpcode .lnum { color: #606060 } This causes your application to run correctly, and load the older, mixed-mode assembly without issues. For full details on what’s happening here and why, I recommend reading Mark Miller’s detailed explanation of this attribute and the reasoning behind it. Before I show any code, let me say: I strongly recommend using the official approach of using app.config to set this policy. That being said, there are (rare) times when, for one reason or another, changing the application configuration file is less than ideal. While this is the supported approach to handling this issue, the CLR Hosting API includes a means of setting this programmatically via the ICLRRuntimeInfo interface.  Normally, this is used if you’re hosting the CLR in a native application in order to set this, at runtime, prior to loading the assemblies.  However, the F# Samples include a nice trick showing how to load this API and bind this policy, at runtime.  This was required in order to host the Managed DirectX API, which is built against an older version of the CLR. This is fairly easy to port to C#.  Instead of a direct port, I also added a little addition – by trapping the COM exception received if unable to bind (which will occur if the 2.0 CLR is already bound), I also allow a runtime check of whether this property was setup properly: public static class RuntimePolicyHelper { public static bool LegacyV2RuntimeEnabledSuccessfully { get; private set; } static RuntimePolicyHelper() { ICLRRuntimeInfo clrRuntimeInfo = (ICLRRuntimeInfo)RuntimeEnvironment.GetRuntimeInterfaceAsObject( Guid.Empty, typeof(ICLRRuntimeInfo).GUID); try { clrRuntimeInfo.BindAsLegacyV2Runtime(); LegacyV2RuntimeEnabledSuccessfully = true; } catch (COMException) { // This occurs with an HRESULT meaning // "A different runtime was already bound to the legacy CLR version 2 activation policy." LegacyV2RuntimeEnabledSuccessfully = false; } } [ComImport] [InterfaceType(ComInterfaceType.InterfaceIsIUnknown)] [Guid("BD39D1D2-BA2F-486A-89B0-B4B0CB466891")] private interface ICLRRuntimeInfo { void xGetVersionString(); void xGetRuntimeDirectory(); void xIsLoaded(); void xIsLoadable(); void xLoadErrorString(); void xLoadLibrary(); void xGetProcAddress(); void xGetInterface(); void xSetDefaultStartupFlags(); void xGetDefaultStartupFlags(); [MethodImpl(MethodImplOptions.InternalCall, MethodCodeType = MethodCodeType.Runtime)] void BindAsLegacyV2Runtime(); } } Using this, it’s possible to not only set this at runtime, but also verify, prior to loading your mixed mode assembly, whether this will succeed. In my case, this was quite useful – I am working on a library purely for internal use which uses a numerical package that is supplied with both a completely managed as well as a native solver.  The native solver uses a CLR 2 mixed-mode assembly, but is dramatically faster than the pure managed approach.  By checking RuntimePolicyHelper.LegacyV2RuntimeEnabledSuccessfully at runtime, I can decide whether to enable the native solver, and only do so if I successfully bound this policy. There are some tricks required here – To enable this sort of fallback behavior, you must make these checks in a type that doesn’t cause the mixed mode assembly to be loaded.  In my case, this forced me to encapsulate the library I was using entirely in a separate class, perform the check, then pass through the required calls to that class.  Otherwise, the library will load before the hosting process gets enabled, which in turn will fail. This code will also, of course, try to enable the runtime policy before the first time you use this class – which typically means just before the first time you check the boolean value.  As a result, checking this early on in the application is more likely to allow it to work. Finally, if you’re using a library, this has to be called prior to the 2.0 CLR loading.  This will cause it to fail if you try to use it to enable this policy in a plugin for most third party applications that don’t have their app.config setup properly, as they will likely have already loaded the 2.0 runtime. As an example, take a simple audio player.  The code below shows how this can be used to properly, at runtime, only use the “native” API if this will succeed, and fallback (or raise a nicer exception) if this will fail: public class AudioPlayer { private IAudioEngine audioEngine; public AudioPlayer() { if (RuntimePolicyHelper.LegacyV2RuntimeEnabledSuccessfully) { // This will load a CLR 2 mixed mode assembly this.audioEngine = new AudioEngineNative(); } else { this.audioEngine = new AudioEngineManaged(); } } public void Play(string filename) { this.audioEngine.Play(filename); } } Now – the warning: This approach works, but I would be very hesitant to use it in public facing production code, especially for anything other than initializing your own application.  While this should work in a library, using it has a very nasty side effect: you change the runtime policy of the executing application in a way that is very hidden and non-obvious.

  Read the article

• Full-text Indexing Books Online

  - by Most Valuable Yak (Rob Volk)

  While preparing for a recent SQL Saturday presentation, I was struck by a crazy idea (shocking, I know): Could someone import the content of SQL Server Books Online into a database and apply full-text indexing to it?  The answer is yes, and it's really quite easy to do. The first step is finding the installed help files.  If you have SQL Server 2012, BOL is installed under the Microsoft Help Library.  You can find the install location by opening SQL Server Books Online and clicking the gear icon for the Help Library Manager.  When the new window pops up click the Settings link, you'll get the following: You'll see the path under Library Location. Once you navigate to that path you'll have to drill down a little further, to C:\ProgramData\Microsoft\HelpLibrary\content\Microsoft\store.  This is where the help file content is kept if you downloaded it for offline use. Depending on which products you've downloaded help for, you may see a few hundred files.  Fortunately they're named well and you can easily find the "SQL_Server_Denali_Books_Online_" files.  We are interested in the .MSHC files only, and can skip the Installation and Developer Reference files. Despite the .MHSC extension, these files are compressed with the standard Zip format, so your favorite archive utility (WinZip, 7Zip, WinRar, etc.) can open them.  When you do, you'll see a few thousand files in the archive.  We are only interested in the .htm files, but there's no harm in extracting all of them to a folder.  7zip provides a command-line utility and the following will extract to a D:\SQLHelp folder previously created: 7z e –oD:\SQLHelp "C:\ProgramData\Microsoft\HelpLibrary\content\Microsoft\store\SQL_Server_Denali_Books_Online_B780_SQL_110_en-us_1.2.mshc" *.htm Well that's great Rob, but how do I put all those files into a full-text index? I'll tell you in a second, but first we have to set up a few things on the database side.  I'll be using a database named Explore (you can certainly change that) and the following setup is a fragment of the script I used in my presentation: USE Explore; GO CREATE SCHEMA help AUTHORIZATION dbo; GO -- Create default fulltext catalog for later FT indexes CREATE FULLTEXT CATALOG FTC AS DEFAULT; GO CREATE TABLE help.files(file_id int not null IDENTITY(1,1) CONSTRAINT PK_help_files PRIMARY KEY, path varchar(256) not null CONSTRAINT UNQ_help_files_path UNIQUE, doc_type varchar(6) DEFAULT('.xml'), content varbinary(max) not null); CREATE FULLTEXT INDEX ON help.files(content TYPE COLUMN doc_type LANGUAGE 1033) KEY INDEX PK_help_files; This will give you a table, default full-text catalog, and full-text index on that table for the content you're going to insert.  I'll be using the command line again for this, it's the easiest method I know: for %a in (D:\SQLHelp\*.htm) do sqlcmd -S. -E -d Explore -Q"set nocount on;insert help.files(path,content) select '%a', cast(c as varbinary(max)) from openrowset(bulk '%a', SINGLE_CLOB) as c(c)" You'll need to copy and run that as one line in a command prompt.  I'll explain what this does while you run it and watch several thousand files get imported: The "for" command allows you to loop over a collection of items.  In this case we want all the .htm files in the D:\SQLHelp folder.  For each file it finds, it will assign the full path and file name to the %a variable.  In the "do" clause, we'll specify another command to be run for each iteration of the loop.  I make a call to "sqlcmd" in order to run a SQL statement.  I pass in the name of the server (-S.), where "." represents the local default instance. I specify -d Explore as the database, and -E for trusted connection.  I then use -Q to run a query that I enclose in double quotes. The query uses OPENROWSET(BULK…SINGLE_CLOB) to open the file as a data source, and to treat it as a single character large object.  In order for full-text indexing to work properly, I have to convert the text content to varbinary. I then INSERT these contents along with the full path of the file into the help.files table created earlier.  This process continues for each file in the folder, creating one new row in the table. And that's it! 5 SQL Statements and 2 command line statements to unzip and import SQL Server Books Online!  In case you're wondering why I didn't use FILESTREAM or FILETABLE, it's simply because I haven't learned them…yet. I may return to this blog after I figure that out and update it with the steps to do so.  I believe that will make it even easier. In the spirit of exploration, I'll leave you to work on some fulltext queries of this content.  I also recommend playing around with the sys.dm_fts_xxxx DMVs (I particularly like sys.dm_fts_index_keywords, it's pretty interesting).  There are additional example queries in the download material for my presentation linked above. Many thanks to Kevin Boles (t) for his advice on (re)checking the content of the help files.  Don't let that .htm extension fool you! The 2012 help files are actually XML, and you'd need to specify '.xml' in your document type column in order to extract the full-text keywords.  (You probably noticed this in the default definition for the doc_type column.)  You can query sys.fulltext_document_types to get a complete list of the types that can be full-text indexed. I also need to thank Hilary Cotter for giving me the original idea. I believe he used MSDN content in a full-text index for an article from waaaaaaaaaaay back, that I can't find now, and had forgotten about until just a few days ago.  He is also co-author of Pro Full-Text Search in SQL Server 2008, which I highly recommend.  He also has some FTS articles on Simple Talk: http://www.simple-talk.com/sql/learn-sql-server/sql-server-full-text-search-language-features/ http://www.simple-talk.com/sql/learn-sql-server/sql-server-full-text-search-language-features,-part-2/

  Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >