Search Results

Search found 3612 results on 145 pages for '1 21 gigawatts'.

Page 42/145 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• external hard drive is no longer recognized, gives buffer I/O errors

  - by BioGeek

  Hi all, The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive. When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message. [19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21 [19712.145347] usb 2-2: configuration #1 chosen from 1 choice [19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices [19712.147514] usb-storage: device found at 21 [19712.147519] usb-storage: waiting for device to settle before scanning [19717.148978] usb-storage: device scan complete [19717.149527] scsi 25:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [19717.151020] sd 25:0:0:0: Attached scsi generic sg2 type 0 [19717.151685] sd 25:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [19717.160402] sd 25:0:0:0: [sdb] Write Protect is off [19717.160412] sd 25:0:0:0: [sdb] Mode Sense: 34 00 00 00 [19717.160418] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165685] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165691] sdb: sdb1 [19719.171808] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19719.171818] sd 25:0:0:0: [sdb] Attached SCSI disk [19737.430998] sd 25:0:0:0: [sdb] Unhandled sense code [19737.431007] sd 25:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [19737.431016] sd 25:0:0:0: [sdb] Sense Key : Medium Error [current] [19737.431027] sd 25:0:0:0: [sdb] Add. Sense: Unrecovered read error [19737.431038] end_request: I/O error, dev sdb, sector 6160463 [19737.431050] Buffer I/O error on device sdb1, logical block 6160400 [19737.431060] Buffer I/O error on device sdb1, logical block 6160401 [19737.431067] Buffer I/O error on device sdb1, logical block 6160402 [19737.431075] Buffer I/O error on device sdb1, logical block 6160403 [19737.431082] Buffer I/O error on device sdb1, logical block 6160404 [19737.431088] Buffer I/O error on device sdb1, logical block 6160405 [19737.431096] Buffer I/O error on device sdb1, logical block 6160406 [19737.431102] Buffer I/O error on device sdb1, logical block 6160407 [19737.431114] Buffer I/O error on device sdb1, logical block 6160408 [19737.431121] Buffer I/O error on device sdb1, logical block 6160409 [19737.712183] sd 6:0:0:0: [sdb] Unhandled sense code [19737.712191] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [19737.712200] sd 6:0:0:0: [sdb] Sense Key : Hardware Error [current] [19737.712210] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information [19737.712222] end_request: I/O error, dev sdb, sector 0 [19737.712232] Buffer I/O error on device sdb, logical block 0 Neither does the external drive show when I use fdisk: jeroen@phalacrocorax:~$ sudo fdisk -l [sudo] password for jeroen: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000341ad Device Boot Start End Blocks Id System /dev/sda1 * 1 18714 150320173+ 83 Linux /dev/sda2 18715 19457 5968147+ 5 Extended /dev/sda5 18715 19457 5968116 82 Linux swap / Solaris` I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external harddisk. Do I have any other options?

  Read the article

• Why do Ping and Dig provide different IP address than nslookup?

  - by user1032531

  When pinging my domain name which points to my home public IP from two different servers on my LAN, it shows them pinging different IP. Further investigation shows dig and nslookup providing different results. See below. A little history. My IP used to be 11.22.33.444 and is hosted by Comcast. I changed routers, and it somehow got changed to 55.66.77.888. I've since updated my 1and1 domain name to point to the 55.66.77.888. desktop is a basic server, runs the web server, and connects wirelessly to my LAN. laptop is a GUI and connected via CAT5. Both operate Centos6.4. My old router was a D-Link, and used their "Virtual Server" feature to pass port 80 to desktop. My new router is a Linksys, and I use their "Port Forwarding" feature to pass port 80 to desktop (however, I haven't gotten this part working yet). What is going on??? Why the different IPs? Obviously, it most somehow be stored on the server, but why does the actual machine even know the public IP since it is on a LAN? How do I purge the old IP? [root@desktop etc]# dig +short myDomain.com 11.22.33.444 [root@desktop etc]# nslookup www.myDomain.com Server: 8.8.8.8 Address: 8.8.8.8#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@desktop etc]# dig myDomain.com ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.6 <<>> myDomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 13822 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;myDomain.com. IN A ;; ANSWER SECTION: myDomain.com. 16031 IN A 11.22.33.444 ;; Query time: 21 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Oct 21 04:36:52 2013 ;; MSG SIZE rcvd: 44 [root@desktop etc]# [root@laptop ~]# dig +short myDomain.com 55.66.77.888 [root@laptop ~]# nslookup www.myDomain.com Server: 192.168.0.1 Address: 192.168.0.1#53 Non-authoritative answer: Name: www.myDomain.com Address: 55.66.77.888 [root@laptop ~]#

  Read the article

• Cannot access a very specific site from my router

  - by DJDarkViper

  This is a problem for me because this site is important to me. It's MY website. And sadly my email is hosted on my site (which I cant access either) When I try to access my website when connected to my Linksys E3000 router, these days it simply just doesn't go through. When I ping it, its all Request Timed Out, and when I tracert C:\Users\Kyle>tracert blackjaguarstudios.com Tracing route to blackjaguarstudios.com [199.188.204.228] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms CISCO26565 [192.168.1.1] 2 16 ms 15 ms 11 ms 11.4.64.1 3 11 ms 9 ms 11 ms rd1cs-ge1-2-1.ok.shawcable.net [64.59.169.2] 4 20 ms 21 ms 22 ms 66.163.76.98 5 37 ms 36 ms 35 ms rc1nr-tge0-9-2-0.wp.shawcable.net [66.163.77.54] 6 112 ms 84 ms 85 ms rc2ch-pos9-0.il.shawcable.net [66.163.76.174] 7 86 ms 89 ms 90 ms rc4as-ge12-0-0.vx.shawcable.net [66.163.64.46] 8 90 ms 84 ms 85 ms eqix.xe-3-3-0.cr2.iad1.us.nlayer.net [206.223.115.61] 9 97 ms 97 ms 99 ms xe-3-3-0.cr1.atl1.us.nlayer.net [69.22.142.105] 10 128 ms 128 ms 126 ms ae1-40g.ar1.atl1.us.nlayer.net [69.31.135.130] 11 101 ms 97 ms 96 ms as16626.xe-2-0-5-102.ar1.atl1.us.nlayer.net [69.31.135.46] 12 100 ms 97 ms 197 ms 6509-sc1.abstractdns.com [207.210.114.166] 13 * * * Request timed out. 14 * * * Request timed out. 15 * * * Request timed out. 16 * * * Request timed out. 17 * * * Request timed out. 18 * * * Request timed out. 19 * * * Request timed out. 20 * * * Request timed out. 21 * * * Request timed out. 22 * * * Request timed out. 23 * * * Request timed out. 24 * * * Request timed out. 25 * * * Request timed out. 26 * * * Request timed out. 27 * * * Request timed out. 28 * * * Request timed out. 29 * * * Request timed out. 30 * * * Request timed out. Trace complete. C:\Users\Kyle> SHAW Cable being my ISP. Figuring this was all something to do with some setting I made on the router, I reset the thing back to factory defaults. Nope. So I'm at a bit of a loss what to do here, as NO device (Computers, Laptops, Tablets, Phones, PS3/ 360, etc) can access my site or its features, so it's not just my computer either. But every other site is just fine. When I connect to my neighbors router, the site comes up just fine. And shes with SHAW as well. What should I do?!

  Read the article

• How to set up dual quadro cards on RHEL 5.5?

  - by Alex J. Roberts

  I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

  Read the article

• VPN - force a selective range of ip to run on VPN (linux)

  - by Francesco

  Preface: I know there are similar question here and there however I'm a kind of newbie on Net stuff so I need an answer on this specific scenario, hoping that can help others too as it is a common problem Let say I cannot do anything on the local switch to change the local ip range, I don't want to use any complicate trick as use VMachine to hide the local ip range but I want to use net tools to solve the issue. Scenario my local net assign me an IP of this class 192.168.1.xxx (ex. 192.168.1.116) and my VPN (VPNC) assign me IP of same class 192.168.1.xxx (ex. 192.168.1.247) Obviously I need VPN to access local address (ex. 192.168.1.100) but when I open any address of the class 192.168.1.xx the route point to my local net and not to the VPN ones. I'm on linux and i'd like gui solution (network manager) in case it is not possible let play with route command. here what network manager offer me: Here my actual route once connected to the VPN: Here some route information (route -n) Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 182.71.21.106 192.168.1.1 255.255.255.255 UGH 0 0 0 wlan0 182.71.21.106 192.168.1.1 255.255.255.255 UGH 0 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 9 0 0 wlan0 192.168.1.246 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 Here my ifconfig : ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.247 P-t-P:192.168.1.246 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:3415 errors:0 dropped:0 overruns:0 frame:0 TX packets:2525 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:3682328 (3.6 MB) TX bytes:402315 (402.3 KB) wlan0 Link encap:Ethernet HWaddr 4c:eb:42:06:a3:a6 inet addr:192.168.1.116 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4eeb:42ff:fe06:a3a6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:72598 errors:0 dropped:0 overruns:0 frame:0 TX packets:42300 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76000532 (76.0 MB) TX bytes:13919400 (13.9 MB) The Question So basically I would like to add a rule to force this particular address (192.168.1.100) on the VPN and not on my local net

  Read the article

• Error Trying To Use Microsoft LifeCam VX-3000

  - by Brian

  Hello, I bought a Microsoft LifeCam VX-3000 web camera for may parent's Dell Dimension 3000 computer running XP SP 3, and I cannot get it to run. THe installation ran successfully, but when I try to run it, I get the error: Faulting application lifecam.exe, version 3.21.263.0, faulting module kernel32.dll, version 5.1.2600.5781, fault address 0x00012afb. The microsoft help link really didn't help... how do I even resolve this type of error? Thanks.

  Read the article

• IKE Phase 1 Aggressive Mode exchange does not complete

  - by Isaac Sutherland

  I've configured a 3G IP Gateway of mine to connect using IKE Phase 1 Aggressive Mode with PSK to my openswan installation running on Ubuntu server 12.04. I've configured openswan as follows: /etc/ipsec.conf: version 2.0 config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn net-to-net authby=secret left=192.168.0.11 [email protected] leftsubnet=10.1.0.0/16 leftsourceip=10.1.0.1 right=%any [email protected] rightsubnet=192.168.127.0/24 rightsourceip=192.168.127.254 aggrmode=yes ike=aes128-md5;modp1536 auto=add /etc/ipsec.secrets: @left.paxcoda.com @right.paxcoda.com: PSK "testpassword" Note that both left and right are NAT'd, with dynamic public IP's. My left ISP gives my router a public IP, but my right ISP gives me a shared dynamic public IP and dynamic private IP. I have dynamic dns for the public ip on the left side. Here is what I see when I sniff the ISAKMP protocol: 21:17:31.228715 IP (tos 0x0, ttl 235, id 43639, offset 0, flags [none], proto UDP (17), length 437) 74.198.87.93.49604 > 192.168.0.11.isakmp: [udp sum ok] isakmp 1.0 msgid 00000000 cookie da31a7896e2a1958->0000000000000000: phase 1 I agg: (sa: doi=ipsec situation=identity (p: #1 protoid=isakmp transform=1 (t: #1 id=ike (type=enc value=aes)(type=keylen value=0080)(type=hash value=md5)(type=auth value=preshared)(type=group desc value=modp1536)(type=lifetype value=sec)(type=lifeduration len=4 value=00015180)))) (ke: key len=192) (nonce: n len=16 data=(da31a7896e2a19582b33...0000001462b01880674b3739630ca7558cec8a89)) (id: idtype=FQDN protoid=0 port=0 len=17 right.paxcoda.com) (vid: len=16) (vid: len=16) (vid: len=16) (vid: len=16) 21:17:31.236720 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 456) 192.168.0.11.isakmp > 74.198.87.93.49604: [bad udp cksum 0x649c -> 0xcd2f!] isakmp 1.0 msgid 00000000 cookie da31a7896e2a1958->5b9776d4ea8b61b7: phase 1 R agg: (sa: doi=ipsec situation=identity (p: #1 protoid=isakmp transform=1 (t: #1 id=ike (type=enc value=aes)(type=keylen value=0080)(type=hash value=md5)(type=auth value=preshared)(type=group desc value=modp1536)(type=lifetype value=sec)(type=lifeduration len=4 value=00015180)))) (ke: key len=192) (nonce: n len=16 data=(32ccefcb793afb368975...000000144a131c81070358455c5728f20e95452f)) (id: idtype=FQDN protoid=0 port=0 len=16 left.paxcoda.com) (hash: len=16) (vid: len=16) (pay20) (pay20) (vid: len=16) However, my 3G Gateway (on the right) doesn't respond, and I don't know why. I think left's response is indeed getting through to my gateway, because in another question, I was trying to set up a similar scenario with Main Mode IKE, and in that case it looks as though at least one of the three 2-way main mode exchanges succeeded. What other explanation for the failure is there? (The 3G Gateway I'm using on the right is a Moxa G3150, by the way.)

  Read the article

• Windows 7 fails to install on KVM with qemu

  - by kief_morris

  I'm trying to install Windows 7 on a virtual machine on my 64 bit Ubuntu Karmic box. I get to the point of selecting my language settings and clicking 'install now', but a short while later I get a blue screen of death. I've tried a few variations, including using the 32 bit (fails very quickly). The virt-install command I've tried includes this: sudo virt-install --connect qemu:///system -n ksm-win7 -r 2048 \ --disk path=/home/kief/VM-Images/ksm-win7.qcow2,size=50 \ -c /var/Software/Windows7/Full/64bit/SW_DVD5_SA_Win_Ent_7_64BIT_English_Full_MLF_X15-70749.ISO \ --vnc --os-type windows --os-variant vista --hvm The limited info I could find suggested that 'vista' should work as the --os-variant, I haven't found any values specific to windows 7. Here's my blue screen: I've found very little by Googling, so I'm guessing this isn't a case of KVM simply not supporting Windows 7. Thanks for any help. Update: I have been able to successfully create a Windows 7 VM using the graphical "Virtual Machine Manager" app, although I don't really understand the cause of the problem with the VM created with virt-install. Comparing the configuration files under /etc/libvirt/qemu provides some clues, although I don't know enough to interpret them properly. The interesting differences in the two VM configurations are: --- win7-virt-install.xml +++ win7-vmm.xml -<domain type='qemu'> +<domain type='kvm'> @@ -21 +21 @@ - <emulator>/usr/bin/qemu-system-x86_64</emulator> + <emulator>/usr/bin/kvm</emulator> @@ -23 +23 @@ - <source file='/home/kief/VM-Images/ksm-win7.qcow2'/> + <source file='/var/lib/libvirt/images/ksm-win7x64.img'/> I'm not sure if this means the working VM is not using qemu at all, or if there is some other difference in the way it's used with kvm. Update2: So I've answered my own question (mostly) below. A KVM VM needs to use KVM's own CPU emulation rather than qemu's in order for me to get Windows 7 installed. I'm not sure whether there is something that can be done to get it working on a qemu-emulation CPU, or whether a newer version will support it. But at least it is possible to get it running on a KVM VM.

  Read the article

• Server freezes at XX:25

  - by Karevan

  We've ordered a 50 euro/month server on hetzner.de, it has debian OS. The problem is that server is freezing in random time of the day and nothing appears in log. Only hardware reboot helps. Part of the log file while it was freezing: Aug 17 22:38:26 Debian-60-squeeze-64-minimal pure-ftpd: ([email protected]) [INFO] New connection from 95.211.120.220 Aug 17 22:38:26 Debian-60-squeeze-64-minimal pure-ftpd: ([email protected]) [INFO] Logout. Aug 17 22:39:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22828]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 17 23:09:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22835]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 17 23:17:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22842]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Aug 17 23:39:01 Debian-60-squeeze-64-minimal /USR/SBIN/CRON[22847]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type$ Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: imklog 4.6.4, log source = /proc/kmsg started. Aug 18 09:47:47 Debian-60-squeeze-64-minimal rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1229" x-info="http://www.rsyslog.com"] (re)start Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Initializing cgroup subsys cpuset Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Initializing cgroup subsys cpu Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) ([email protected]) (gcc version 4.3.5 (Debian 4.3.5$ Aug 18 09:47:47 Debian-60-squeeze-64-minimal kernel: [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/md2 ro As you can see, it appears only the fact of starting. No. theres no way to look in server's console right after when it freezes, sadly. Datacenter supporters do not really want to help about that. Server has been installed 30th july, times and dates of freezes are down there: 6 august, 0:25 18 august, 2:27 21 august, 1:25 26 august, 23:26. We decided that freezing around ??:25 isn't a hardware fault, and decided to reinstall the OS. Later, 31 august, our admin backed up all files, reinstalled Debian, and restored the backup. But then, 7 september, server went down again, at 5:05. We thought it was related to Anyone else experiencing high rates of Linux server crashes during a leap second day? and turned ntp off. But then the server went down twice again, 21 september, 17:29 and 24 september, 20:27. I called all linux admins I knew to help with solving it and they said everything is fine about configuring OS and it could be hardware only. But they dont know why it always freezes at XX:25-30. Maybe some of you know about something related to that?

  Read the article

• tmux: Suddenly, cannot horizontally split

  - by A__A__0

  As root, using a reasonably default .profile and .shrc and an empty tmux.conf, I am unable to split the window horizontally. There are a number of cases to consider so I'll list them clearly. Using the keybinding + empty configuration: nothing happens Using the keybinding + my configuration: a bell is generated, nothing else; occasionally, the split will appear and disappear immediately (maybe it always does this, but I'm connecting over ssh so it may not make it through) Using tmux split-window -h with any config: tmux immediately exits I've posted here in order the server and client verbose logs generated by tmux -v during the third case: server started, pid 9523 socket path /tmp/tmux-0/default new client 7 got 100 from client 7 got 101 from client 7 got 102 from client 7 got 103 from client 7 got 104 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 105 from client 7 got 106 from client 7 got 200 from client 7 cmdq 0x801c6e080: new-session (client 7) new term: xterm xterm override: XT xterm override: Ms ]52;%p1%s;%p2%s xterm override: Cs ]12;%p1%s xterm override: Cr ]112 xterm override: Ss [%p1%d q xterm override: Se [2 q new key Oo: 0x1021 (KP/) new key Oj: 0x1022 (KP*) new key Om: 0x1023 (KP-) new key Ow: 0x1024 (KP7) new key Ox: 0x1025 (KP8) new key Oy: 0x1026 (KP9) new key Ok: 0x1027 (KP+) new key Ot: 0x1028 (KP4) new key Ou: 0x1029 (KP5) new key Ov: 0x102a (KP6) new key Oq: 0x102b (KP1) new key Or: 0x102c (KP2) new key Os: 0x102d (KP3) new key OM: 0x102e (KPEnter) new key Op: 0x102f (KP0) new key On: 0x1030 (KP.) new key OA: 0x101d (Up) new key OB: 0x101e (Down) new key OC: 0x1020 (Right) new key OD: 0x101f (Left) new key [A: 0x101d (Up) new key [B: 0x101e (Down) new key [C: 0x1020 (Right) new key [D: 0x101f (Left) new key OH: 0x1018 (Home) new key OF: 0x1019 (End) new key [H: 0x1018 (Home) new key [F: 0x1019 (End) new key Oa: 0x501d (C-Up) new key Ob: 0x501e (C-Down) new key Oc: 0x5020 (C-Right) new key Od: 0x501f (C-Left) new key [a: 0x901d (S-Up) new key [b: 0x901e (S-Down) new key [c: 0x9020 (S-Right) new key [d: 0x901f (S-Left) new key [11^: 0x5002 (C-F1) new key [12^: 0x5003 (C-F2) new key [13^: 0x5004 (C-F3) new key [14^: 0x5005 (C-F4) new key [15^: 0x5006 (C-F5) new key [17^: 0x5007 (C-F6) new key [18^: 0x5008 (C-F7) new key [19^: 0x5009 (C-F8) new key [20^: 0x500a (C-F9) new key [21^: 0x500b (C-F10) new key [23^: 0x500c (C-F11) new key [24^: 0x500d (C-F12) new key [25^: 0x500e (C-F13) new key [26^: 0x500f (C-F14) new key [28^: 0x5010 (C-F15) new key [29^: 0x5011 (C-F16) new key [31^: 0x5012 (C-F17) new key [32^: 0x5013 (C-F18) new key [33^: 0x5014 (C-F19) new key [34^: 0x5015 (C-F20) new key [2^: 0x5016 (C-IC) new key [3^: 0x5017 (C-DC) new key [7^: 0x5018 (C-Home) new key [8^: 0x5019 (C-End) new key [6^: 0x501a (C-NPage) new key [5^: 0x501b (C-PPage) new key [11$: 0x9002 (S-F1) new key [12$: 0x9003 (S-F2) new key [13$: 0x9004 (S-F3) new key [14$: 0x9005 (S-F4) new key [15$: 0x9006 (S-F5) new key [17$: 0x9007 (S-F6) new key [18$: 0x9008 (S-F7) new key [19$: 0x9009 (S-F8) new key [20$: 0x900a (S-F9) new key [21$: 0x900b (S-F10) new key [23$: 0x900c (S-F11) new key [24$: 0x900d (S-F12) new key [25$: 0x900e (S-F13) new key [26$: 0x900f (S-F14) new key [28$: 0x9010 (S-F15) new key [29$: 0x9011 (S-F16) new key [31$: 0x9012 (S-F17) new key [32$: 0x9013 (S-F18) new key [33$: 0x9014 (S-F19) new key [34$: 0x9015 (S-F20) new key [2$: 0x9016 (S-IC) new key [3$: 0x9017 (S-DC) new key [7$: 0x9018 (S-Home) new key [8$: 0x9019 (S-End) new key [6$: 0x901a (S-NPage) new key [5$: 0x901b (S-PPage) new key [11@: 0xd002 (C-S-F1) new key [12@: 0xd003 (C-S-F2) new key [13@: 0xd004 (C-S-F3) new key [14@: 0xd005 (C-S-F4) new key [15@: 0xd006 (C-S-F5) new key [17@: 0xd007 (C-S-F6) new key [18@: 0xd008 (C-S-F7) new key [19@: 0xd009 (C-S-F8) new key [20@: 0xd00a (C-S-F9) new key [21@: 0xd00b (C-S-F10) new key [23@: 0xd00c (C-S-F11) new key [24@: 0xd00d (C-S-F12) new key [25@: 0xd00e (C-S-F13) new key [26@: 0xd00f (C-S-F14) new key [28@: 0xd010 (C-S-F15) new key [29@: 0xd011 (C-S-F16) new key [31@: 0xd012 (C-S-F17) new key [32@: 0xd013 (C-S-F18) new key [33@: 0xd014 (C-S-F19) new key [34@: 0xd015 (C-S-F20) new key [2@: 0xd016 (C-S-IC) new key [3@: 0xd017 (C-S-DC) new key [7@: 0xd018 (C-S-Home) new key [8@: 0xd019 (C-S-End) new key [6@: 0xd01a (C-S-NPage) new key [5@: 0xd01b (C-S-PPage) new key [I: 0x1031 ((null)) new key [O: 0x1032 ((null)) new key OP: 0x1002 (F1) new key OQ: 0x1003 (F2) new key OR: 0x1004 (F3) new key OS: 0x1005 (F4) new key [15~: 0x1006 (F5) new key [17~: 0x1007 (F6) new key [18~: 0x1008 (F7) new key [19~: 0x1009 (F8) new key [20~: 0x100a (F9) new key [21~: 0x100b (F10) new key [23~: 0x100c (F11) new key [24~: 0x100d (F12) new key [2~: 0x1016 (IC) new key [3~: 0x1017 (DC) replacing key OH: 0x1018 (Home) replacing key OF: 0x1019 (End) new key [6~: 0x101a (NPage) new key [5~: 0x101b (PPage) new key [Z: 0x101c (BTab) replacing key OA: 0x101d (Up) replacing key OB: 0x101e (Down) replacing key OD: 0x101f (Left) replacing key OC: 0x1020 (Right) spawn: /bin/sh -- session 0 created writing 207 to client 7 got 208 from client 7 input_parse: '#' ground input_parse: ' ' ground keys are 7 ([?1;2c) received service class 1 complete key [?1;2c 0xfff keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (m) complete key m 0x6d input_parse: 'm' ground keys are 1 (u) complete key u 0x75 input_parse: 'u' ground keys are 1 (x) complete key x 0x78 input_parse: 'x' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (s) complete key s 0x73 input_parse: 's' ground keys are 1 (p) complete key p 0x70 input_parse: 'p' ground keys are 1 (l) complete key l 0x6c input_parse: 'l' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (t) complete key t 0x74 input_parse: 't' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 () complete key 0x7f input_parse: '' ground input_c0_dispatch: ' input_parse: '' ground input_parse: '[' esc_enter input_parse: 'K' csi_enter input_csi_dispatch: 'K' "" "" keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 (i) complete key i 0x69 input_parse: 'i' ground keys are 1 (n) complete key n 0x6e input_parse: 'n' ground keys are 1 (d) complete key d 0x64 input_parse: 'd' ground keys are 1 (o) complete key o 0x6f input_parse: 'o' ground keys are 1 (w) complete key w 0x77 input_parse: 'w' ground keys are 1 ( ) complete key 0x20 input_parse: ' ' ground keys are 1 (-) complete key - 0x2d input_parse: '-' ground keys are 1 (h) complete key h 0x68 input_parse: 'h' ground keys are 1 ( ) complete key 0xd input_parse: ' ' ground input_c0_dispatch: ' input_parse: ' ' ground input_c0_dispatch: ' new client 13 got 100 from client 13 got 101 from client 13 got 102 from client 13 got 103 from client 13 got 104 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 105 from client 13 got 106 from client 13 got 200 from client 13 cmdq 0x801c6e160: split-window -h (client 13) spawn: /bin/sh -- writing 203 to client 13 input_parse: '#' ground input_parse: ' ' ground input_parse: '#' ground input_parse: ' ' ground lost client 13 session 0 destroyed writing 203 to client 7 got 205 from client 7 writing 204 to client 7 lost client 7 got 207 from server got 203 from server got 204 from server There are some other peculiarities: With a newly created user (from which I overwrote root's .profile and .shrc, tmux works perfectly. Occasionally (twice out of the 50 or so times I've tested it), the splitting will work fine once in a session. (This happened for example when I ran ktrace on tmux, which I can also post) To explain the 'suddenly' part of the title: when I started my newly updated mysql56-server, tmux immediately exited and lost the session. Recently I changed architectures, from FreeBSD 10.0 i386 to amd64, and I am still working through shared library incompatibilities. I suspect that this could be involved, but I can't imagine how an incompatibility of this sort could result in such a specific, isolated failure.

  Read the article

• How to know when the kernel was last compiled?

  - by Mehmet Tuncal

  I have installed a linux distro and I "think" it is vulnerable to kernel exploits. I have to update kernel but I need to know if it is really compiled in year 2003? How can I know if additional updates are made to the kernel? Linux gandalf 2.4.21-4.ELsmp #1 SMP Fri Oct 3 17:52:56 EDT 2003 i686 i686 i386 GNU/Linux Does also "smp" mean that it is safe from latest threats or something? Thank you.

  Read the article

• Solution to route/proxy SNMP Traps (or Netflow, generic UDP, etc) for network monitoring?

  - by Christopher Cashell

  I'm implementing a network monitoring solution for a very large network (approximately 5000 network devices). We'd like to have all devices on our network send SNMP traps to a single box (technically this will probably be an HA pair of boxes) and then have that box pass the SNMP traps on to the real processing boxes. This will allow us to have multiple back-end boxes handling traps, and to distribute load among those back end boxes. One key feature that we need is the ability to forward the traps to a specific box depending on the source address of the trap. Any suggestions for the best way to handle this? Among the things we've considered are: Using snmptrapd to accept the traps, and have it pass them off to a custom written perl handler script to rewrite the trap and send it to the proper processing box Using some sort of load balancing software running on a Linux box to handle this (having some difficulty finding many load balancing programs that will handle UDP) Using a Load Balancing Appliance (F5, etc) Using IPTables on a Linux box to route the SNMP traps with NATing We've currently implemented and are testing the last solution, with a Linux box with IPTables configured to receive the traps, and then depending on the source address of the trap, rewrite it with a destination nat (DNAT) so the packet gets sent to the proper server. For example: # Range: 10.0.0.0/19 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.0.0/19 -j DNAT --to-destination 10.1.2.3 # Range: 10.0.33.0/21 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.33.0/21 -j DNAT --to-destination 10.1.2.3 # Range: 10.1.0.0/16 Site: xyz01 Destination: bar01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.1.0.0/16 -j DNAT --to-destination 10.3.2.1 This should work with excellent efficiency for basic trap routing, but it leaves us completely limited to what we can mach and filter on with IPTables, so we're concerned about flexibility for the future. Another feature that we'd really like, but isn't quite a "must have" is the ability to duplicate or mirror the UDP packets. Being able to take one incoming trap and route it to multiple destinations would be very useful. Has anyone tried any of the possible solutions above for SNMP traps (or Netflow, general UDP, etc) load balancing? Or can anyone think of any other alternatives to solve this?

  Read the article

• Failed to convert a wmv file to mp4 with ffmpeg

  - by Olaf Erlandsen

  i need a help with this command FFMPEG COMMAND: ffmpeg -y -i /input.wmv -vcodec libx264 -acodec libfaac -ac 2 -bufsize 20M -sameq -f mp4 /output.mp4 Output: ffmpeg version 1.0 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 9 2012 07:04:08 with gcc 4.4.6 (GCC) 20120305 (Red Hat 4.4.6-4) [wmv3 @ 0x16a4800] Extra data: 8 bits left, value: 0 Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from '/input.wmv': Metadata: WMFSDKVersion : 11.0.5721.5275 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 Duration: 00:01:35.10, start: 0.000000, bitrate: 496 kb/s Stream #0:0(spa): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, s16, 64 kb/s Stream #0:1(spa): Video: wmv3 (Main) (WMV3 / 0x33564D57), yuv420p, 320x240, 425 kb/s, SAR 1:1 DAR 4:3, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 0x16c3000] VBV bufsize set but maxrate unspecified, ignored [libx264 @ 0x16c3000] using SAR=1/1 [libx264 @ 0x16c3000] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x16c3000] profile High, level 1.3 [libx264 @ 0x16c3000] 264 - core 128 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 [wmv3 @ 0x16a4800] Extra data: 8 bits left, value: 0 Output #0, mp4, to '/output.mp4': Metadata: WMFSDKVersion : 11.0.5721.5275 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 encoder : Lavf54.29.104 Stream #0:0(spa): Video: h264 ([33][0][0][0] / 0x0021), yuv420p, 320x240 [SAR 1:1 DAR 4:3], q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(spa): Audio: aac ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (wmv3 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libfaac) Press [q] to stop, [?] for help [libfaac @ 0x16b3600] Que input is backward in time [mp4 @ 0x16bb3a0] st:0 PTS: 6174 DTS: 6174 < 7169 invalid, clipping frame= 144 fps=0.0 q=29.0 size= 207kB time=00:00:03.38 bitrate= 500.3kbits/s frame= 259 fps=257 q=29.0 size= 447kB time=00:00:07.30 bitrate= 501.3kbits/s frame= 375 fps=248 q=29.0 size= 668kB time=00:00:11.01 bitrate= 496.5kbits/s frame= 487 fps=241 q=29.0 size= 836kB time=00:00:14.85 bitrate= 460.7kbits/s frame= 605 fps=240 q=29.0 size= 1080kB time=00:00:18.92 bitrate= 467.4kbits/s frame= 719 fps=238 q=29.0 size= 1306kB time=00:00:22.80 bitrate= 469.2kbits/s frame= 834 fps=237 q=29.0 size= 1546kB time=00:00:26.52 bitrate= 477.3kbits/s frame= 953 fps=237 q=29.0 size= 1763kB time=00:00:30.27 bitrate= 477.0kbits/s frame= 1071 fps=237 q=29.0 size= 1986kB time=00:00:34.36 bitrate= 473.4kbits/s frame= 1161 fps=231 q=29.0 size= 2160kB time=00:00:37.21 bitrate= 475.4kbits/s frame= 1221 fps=220 q=29.0 size= 2282kB time=00:00:39.53 bitrate= 472.9kbits/s frame= 1280 fps=212 q=29.0 size= 2392kB time=00:00:41.16 bitrate= 476.1kbits/s frame= 1331 fps=203 q=29.0 size= 2502kB time=00:00:43.23 bitrate= 474.1kbits/s frame= 1379 fps=195 q=29.0 size= 2618kB time=00:00:44.72 bitrate= 479.6kbits/s frame= 1430 fps=189 q=29.0 size= 2733kB time=00:00:46.34 bitrate= 483.0kbits/s frame= 1487 fps=184 q=29.0 size= 2851kB time=00:00:48.40 bitrate= 482.6kbits/s frame= 1546 fps=180 q=26.0 size= 2973kB time=00:00:50.43 bitrate= 482.9kbits/s frame= 1610 fps=177 q=29.0 size= 3112kB time=00:00:52.40 bitrate= 486.5kbits/s frame= 1672 fps=174 q=29.0 size= 3231kB time=00:00:54.35 bitrate= 487.0kbits/s frame= 1733 fps=171 q=29.0 size= 3348kB time=00:00:56.51 bitrate= 485.3kbits/s frame= 1792 fps=169 q=29.0 size= 3459kB time=00:00:58.28 bitrate= 486.2kbits/s frame= 1851 fps=166 q=29.0 size= 3588kB time=00:01:00.32 bitrate= 487.2kbits/s frame= 1910 fps=164 q=29.0 size= 3716kB time=00:01:02.36 bitrate= 488.1kbits/s frame= 1972 fps=162 q=29.0 size= 3833kB time=00:01:04.45 bitrate= 487.1kbits/s frame= 2032 fps=161 q=29.0 size= 3946kB time=00:01:06.40 bitrate= 486.8kbits/s frame= 2091 fps=159 q=29.0 size= 4080kB time=00:01:08.35 bitrate= 488.9kbits/s frame= 2150 fps=158 q=29.0 size= 4201kB time=00:01:10.54 bitrate= 487.9kbits/s frame= 2206 fps=156 q=29.0 size= 4315kB time=00:01:12.39 bitrate= 488.3kbits/s frame= 2263 fps=154 q=29.0 size= 4438kB time=00:01:14.21 bitrate= 489.9kbits/s frame= 2327 fps=154 q=29.0 size= 4567kB time=00:01:16.16 bitrate= 491.2kbits/s frame= 2388 fps=152 q=29.0 size= 4666kB time=00:01:18.48 bitrate= 487.0kbits/s frame= 2450 fps=152 q=29.0 size= 4776kB time=00:01:20.24 bitrate= 487.6kbits/s frame= 2511 fps=151 q=29.0 size= 4890kB time=00:01:22.15 bitrate= 487.6kbits/s frame= 2575 fps=150 q=29.0 size= 5015kB time=00:01:24.42 bitrate= 486.6kbits/s frame= 2635 fps=149 q=29.0 size= 5130kB time=00:01:26.62 bitrate= 485.2kbits/s frame= 2695 fps=148 q=29.0 size= 5258kB time=00:01:28.65 bitrate= 485.9kbits/s frame= 2758 fps=147 q=29.0 size= 5382kB time=00:01:30.64 bitrate= 486.4kbits/s frame= 2816 fps=147 q=29.0 size= 5521kB time=00:01:32.69 bitrate= 487.9kbits/s get_buffer() failed Error while decoding stream #0:0: Invalid argument frame= 2848 fps=143 q=-1.0 Lsize= 5787kB time=00:01:35.10 bitrate= 498.4kbits/s video:5099kB audio:581kB subtitle:0 global headers:0kB muxing overhead 1.884230% [libx264 @ 0x16c3000] frame I:12 Avg QP:22.64 size: 12092 [libx264 @ 0x16c3000] frame P:1508 Avg QP:25.39 size: 2933 [libx264 @ 0x16c3000] frame B:1328 Avg QP:30.62 size: 491 [libx264 @ 0x16c3000] consecutive B-frames: 10.0% 80.8% 8.1% 1.1% [libx264 @ 0x16c3000] mb I I16..4: 1.8% 72.1% 26.0% [libx264 @ 0x16c3000] mb P I16..4: 0.4% 2.4% 0.3% P16..4: 48.3% 19.6% 19.3% 0.0% 0.0% skip: 9.5% [libx264 @ 0x16c3000] mb B I16..4: 0.1% 0.2% 0.0% B16..8: 52.6% 6.6% 2.3% direct: 1.4% skip:36.8% L0:48.8% L1:42.5% BI: 8.7% [libx264 @ 0x16c3000] 8x8 transform intra:75.3% inter:55.4% [libx264 @ 0x16c3000] coded y,uvDC,uvAC intra: 77.9% 81.7% 33.1% inter: 24.2% 11.6% 1.1% [libx264 @ 0x16c3000] i16 v,h,dc,p: 25% 16% 44% 14% [libx264 @ 0x16c3000] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 15% 29% 6% 5% 6% 6% 7% 7% [libx264 @ 0x16c3000] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 20% 15% 17% 7% 9% 8% 9% 7% 7% [libx264 @ 0x16c3000] i8c dc,h,v,p: 50% 19% 24% 7% [libx264 @ 0x16c3000] Weighted P-Frames: Y:3.8% UV:1.1% [libx264 @ 0x16c3000] ref P L0: 75.6% 19.1% 4.2% 1.0% 0.1% [libx264 @ 0x16c3000] ref B L0: 98.1% 1.9% 0.0% [libx264 @ 0x16c3000] ref B L1: 98.9% 1.1% [libx264 @ 0x16c3000] kb/s:439.47 FFMPEG Configuration: --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvpx --enable-libfaac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-gpl --enable-postproc --enable-nonfree libavutil 51. 73.101 / 51. 73.101 libavcodec 54. 59.100 / 54. 59.100 libavformat 54. 29.104 / 54. 29.104 libavdevice 54. 2.101 / 54. 2.101 libavfilter 3. 17.100 / 3. 17.100 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 PROBLEM #1: [libfaac @ 0x16b3600] Que input is backward in time [mp4 @ 0x16bb3a0] st:0 PTS: 6174 DTS: 6174 < 7169 invalid, clipping PROBLEM #2: get_buffer() failed Error while decoding stream #0:0: Invalid argument

  Read the article

• What other protocols must not be fire-walled for FTP to work?

  - by Chris

  my Netgear router randomly reset itself the other day loosing all of my config settings: DSL details, Firewall rules, the lot! So I set about restoring all of the details manually, but when it came to configuring the firewall I wanted improve the security by explicitly setting 'deny' rules for everything that I figured is 'non-essential', and (although not necessary) whilst I was at it I set explicit 'allow' for the 'essential' protocols. I'll admit now I didn't really know what I was doing and everything was just 'my best guess', but I enabled only DNS, HTTP, HTTPS, FTP, SFTP, TFTP with everything else blocked. This did not work for me as I could not access 99% of web sites (although strangely Google worked!), so I played around a bit more and found that (oddly) if I disabled just the explicit 'allow' rules then everything worked fine, for browsing anyway. Today I came to work on some web-sites via FTP and just could not get a consistent connection, it kept dropping out after a few files or being blocked by the server or simply not connecting. It would authenticate okay but then stop when retrieving the initial directory listing! e.g.: Status: Delaying connection for 1 second due to previously failed connection attempt... Status: Resolving address of ftp.domain.co.uk Status: Resolving address of ftp.domain.co.uk Status: Connecting to 123.123.123.123:21... Status: Connecting to 123.123.123.123:21... Status: Connection established, waiting for welcome message... Status: Connection established, waiting for welcome message... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... Response: 421 Too many connections (8) from this IP Error: Could not connect to server Status: Delaying connection for 5 seconds due to previously failed connection attempt... I've checked and re-checked the FTP settings (they worked before anyway), I have Googled the I.T. out of the various protocols that I have blocked in the fire-wall but none seem essential to FTP (other than FTP/SFTP etc. which I have passively enabled). I'm (clearly) no server engineer, or protocols / fire-wall expert so I was hoping that some one could maybe shed some light on why my FTP is failing. I've been wondering if I ought to be allowing BGP, BOOTP and/or IDENT (or any others)? What other protocols are required for FTP? Thanks in advance!

  Read the article

• Rails 3 shows 404 error instead of index.html (nginx + unicorn)

  - by Miko

  I have an index.html in public/ that should be loading by default but instead I get a 404 error when I try to access http://example.com/ The page you were looking for doesn't exist. You may have mistyped the address or the page may have moved. This has something to do with nginx and unicorn which I am using to power Rails 3 When take unicorn out of the nginx configuration file, the problem goes away and index.html loads just fine. Here is my nginx configuration file: upstream unicorn { server unix:/tmp/.sock fail_timeout=0; } server { server_name example.com; root /www/example.com/current/public; index index.html; keepalive_timeout 5; location / { try_files $uri @unicorn; } location @unicorn { proxy_pass http://unicorn; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $host; proxy_redirect off; } } My config/routes.rb is pretty much empty: Advertise::Application.routes.draw do |map| resources :users end The index.html file is located in public/index.html and it loads fine if I request it directly: http://example.com/index.html To reiterate, when I remove all references to unicorn from the nginx conf, index.html loads without any problems, I have a hard time understanding why this occurs because nginx should be trying to load that file on its own by default. -- Here is the error stack from production.log: Started GET "/" for 68.107.80.21 at 2010-08-08 12:06:29 -0700 Processing by HomeController#index as HTML Completed in 1ms ActionView::MissingTemplate (Missing template home/index with {:handlers=>[:erb, :rjs, :builder, :rhtml, :rxml, :haml], :formats=>[:html], :locale=>[:en, :en]} in view paths "/www/example.com/releases/20100808170224/app/views", "/www/example.com/releases/20100808170224/vendor/plugins/paperclip/app/views", "/www/example.com/releases/20100808170224/vendor/plugins/haml/app/views"): /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/paths.rb:14:in `find' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/lookup_context.rb:79:in `find' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/base.rb:186:in `find_template' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/render/rendering.rb:45:in `_determine_template' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/actionpack-3.0.0.beta4/lib/action_view/render/rendering.rb:23:in `render' /usr/local/rvm/gems/ruby-1.9.2-rc2/gems/haml-3.0.15/lib/haml/helpers/action_view_mods.rb:13:in `render_with_haml' etc... -- nginx error log for this virtualhost comes up empty: 2010/08/08 12:40:22 [info] 3118#0: *1 client 68.107.80.21 closed keepalive connection My guess is unicorn is intercepting the request to index.html before nginx gets to process it.

  Read the article

• Why won't vyatta allow SMTP through my firewall?

  - by Solignis

  I am setting up a vyatta router on VMware ESXi, But I see to have hit a major snag, I could not get my firewall and NAT to work correctly. I am not sure what was wrong with NAT but it "seems" to be working now. But the firewall is not allowing traffic from my WAN interface (eth0) to my LAN (eth1). I can confirm its the firewall because I disabled all firewall rules and everything worked with just NAT. If put the firewalls (WAN and LAN) back in place nothing can get through to port 25. I am not really sure what the issue could be I am using pretty basic firewall rules, I wrote the rules while looking at the vyatta docs so unless there is something odd with the documentation they "should" be working. Here is my NAT rules so far; vyatta@gateway# show service nat rule 20 { description "Zimbra SNAT #1" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.17 } type source } rule 21 { description "Zimbra SMTP #1" destination { address 74.XXX.XXX.XXX port 25 } inbound-interface eth0 inside-address { address 10.0.0.17 } protocol tcp type destination } rule 100 { description "Default LAN -> WAN" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.0/24 } type source } Then here is my firewall rules, this is where I believe the problem is. vyatta@gateway# show firewall all-ping enable broadcast-ping disable conntrack-expect-table-size 4096 conntrack-hash-size 4096 conntrack-table-size 32768 conntrack-tcp-loose enable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians enable name LAN_in { rule 100 { action accept description "Default LAN -> any" protocol all source { address 10.0.0.0/24 } } } name LAN_out { } name LOCAL { rule 100 { action accept state { established enable } } } name WAN_in { rule 20 { action accept description "Allow SMTP connections to MX01" destination { address 74.XXX.XXX.XXX port 25 } protocol tcp } rule 100 { action accept description "Allow established connections back through" state { established enable } } } name WAN_out { } receive-redirects disable send-redirects enable source-validation disable syn-cookies enable SIDENOTE To test for open ports I have using this website, http://www.yougetsignal.com/tools/open-ports/, it showed port 25 as open without the firewall rules and closed with the firewall rules. UPDATE Just to see if the firewall was working properly I made a rule to block SSH from the WAN interface. When I checked for port 22 on my primary WAN address it said it was still open even though I outright blocked the port. Here is the rule I used; rule 21 { action reject destination { address 74.219.80.163 port 22 } protocol tcp } So now I am convinced either I am doing something wrong or the firewall is not working like it should.

  Read the article

• pfSense gateway rules by IP ranges

  - by lpfavreau

  Hello, I have pfSense (1.2.3) with a WAN (gateway 10.10.20.1/24) and an OPT1 (gateway 10.10.21.1/24). I also have a LAN (static 10.10.12.1/24, DHCP 10.10.12.128-199/24). I want to create rules so that traffic coming from LAN go through WAN if the source IP address is below 10.10.12.128/24 and through OPT1 otherwise. I would I go and make that happen? Thanks!

  Read the article

• How can I reroute IP addresses for my router?

  - by user29600

  I want to do something similar to what the hosts file does. I just want to set it so that certain IP's always go to the IP I want it to go to... eg. Have... 158.204.281.222 always go to 160.201.21.239 just as a random example... is this possible? Thanks, Matt

  Read the article

• Mandatory profile on Terminal server fails to load. Userenv.log debug

  - by Datapimp23

  Hi, We're having a lot of corrupted profiles lately on our profile share. At the moment I have no clue why, but I decided to switch to one mandatory profile since the users can all use the same and there is no need to have seperate profiles for each user. Here's what I did. I logged into the Terminal server with a new user and configured some stuff (imported certificates and a few files). Then I logged out. Later as admin I copied the profile to another server and renamed it to bsilo. I made sure the user hive settings were adjusted. Everyone had access to the hive. I shared the bsilo folder with full access for everyone. I set the NTFS permissions to read, read & execute, list folder contents for domain users. I also renamed NTUSER.DAT to NTUSER.MAN. Now I set a env variable %manprofile% on the Terminal server that points to \server\bsilo\ntuser.man I set the env var as terminal services profile path for a test user. When I log in I as the user get the following output The system cannot find the path specified. Can somebody point me in the right direction. Thanks USERENV(1774.d18) 15:52:39:724 InitializePolicyProcessing: Initialised Machine Mutex/Events USERENV(1774.d18) 15:52:39:724 InitializePolicyProcessing: Initialised User Mutex/Events USERENV(1774.d18) 15:52:39:724 LibMain: Process Name: \??\C:\WINDOWS\system32\winlogon.exe USERENV(1774.d18) 15:52:48:005 LoadUserProfile: Yes, we can impersonate the user. Running as self USERENV(1774.d18) 15:52:48:005 ========================================================= USERENV(1774.d18) 15:52:48:005 LoadUserProfile: Entering, hToken = <0x340, lpProfileInfo = 0x6e5d8 USERENV(1774.d18) 15:52:48:005 LoadUserProfile: lpProfileInfo-dwFlags = <0x0 USERENV(1774.d18) 15:52:48:005 LoadUserProfile: lpProfileInfo-lpUserName = USERENV(1774.d18) 15:52:48:005 LoadUserProfile: lpProfileInfo-lpProfilePath = <\server\bsilo\ntuser.man USERENV(1774.d18) 15:52:48:005 LoadUserProfile: lpProfileInfo-lpDefaultPath = <\BDPINF5\netlogon\Default User USERENV(1774.d18) 15:52:48:005 LoadUserProfile: NULL server name USERENV(1774.d18) 15:52:48:005 LoadUserProfile: no thread token found, impersonating self. USERENV(1774.d18) 15:52:48:005 GetInterface: Returning rpc binding handle USERENV(218.2f94) 15:52:48:005 IProfileSecurityCallBack: client authenticated. USERENV(218.2f94) 15:52:48:005 DropClientContext: Got client token 000009B4, sid = S-1-5-18 USERENV(218.2f94) 15:52:48:005 MIDL_user_allocate enter USERENV(218.2f94) 15:52:48:005 DropClientContext: load profile object successfully made USERENV(218.2f94) 15:52:48:005 DropClientContext: Returning 0 USERENV(1774.d18) 15:52:48:005 LoadUserProfile: Calling DropClientToken (as self) succeeded USERENV(1774.d18) 15:52:48:005 CProfileDialog::Initialize : Cookie generated USERENV(1774.d18) 15:52:48:005 CProfileDialog::Initialize : Endpoint generated USERENV(218.1f38) 15:52:48:005 IProfileSecurityCallBack: client authenticated. USERENV(218.1f38) 15:52:48:020 LoadUserProfileI: RPC end point IProfileDialog_9D36D6DD48F0578A2A41B23D7A982E63 USERENV(218.1f38) 15:52:48:020 In LoadUserProfileP USERENV(218.1f38) 15:52:48:020 LoadUserProfile: Running as client, sid = S-1-5-18 USERENV(218.1f38) 15:52:48:020 ========================================================= USERENV(218.1f38) 15:52:48:020 LoadUserProfile: Entering, hToken = <0x98c, lpProfileInfo = 0x9c940 USERENV(218.1f38) 15:52:48:020 LoadUserProfile: lpProfileInfo-dwFlags = <0x0 USERENV(218.1f38) 15:52:48:020 LoadUserProfile: lpProfileInfo-lpUserName = USERENV(218.1f38) 15:52:48:020 LoadUserProfile: lpProfileInfo-lpProfilePath = <\server\bsilo\ntuser.man USERENV(218.1f38) 15:52:48:020 LoadUserProfile: lpProfileInfo-lpDefaultPath = <\BDPINF5\netlogon\Default User USERENV(218.1f38) 15:52:48:020 LoadUserProfile: NULL server name USERENV(218.1f38) 15:52:48:020 LoadUserProfile: User sid: S-1-5-21-807756564-1922302612-1565739477-22627 USERENV(218.1f38) 15:52:48:020 CSyncManager::EnterLock USERENV(218.1f38) 15:52:48:020 CSyncManager::EnterLock: No existing entry found USERENV(218.1f38) 15:52:48:020 CSyncManager::EnterLock: New entry created USERENV(218.1f38) 15:52:48:020 CHashTable::HashAdd: S-1-5-21-807756564-1922302612-1565739477-22627 added in bucket 11 USERENV(218.1f38) 15:52:48:020 LoadUserProfile: Wait succeeded. In critical section. USERENV(218.1f38) 15:52:48:864 GetOldSidString: Failed to open profile profile guid key with error 2 USERENV(218.1f38) 15:52:48:864 GetProfileSid: No Guid - Sid Mapping available USERENV(218.1f38) 15:52:48:864 TestIfUserProfileLoaded: return with error 2. USERENV(218.1f38) 15:52:48:864 GetOldSidString: Failed to open profile profile guid key with error 2 USERENV(218.1f38) 15:52:48:864 GetProfileSid: No Guid - Sid Mapping available USERENV(218.1f38) 15:52:48:864 LoadUserProfile: Expanded profile path is \server\bsilo\ntuser.man USERENV(218.1f38) 15:52:48:880 ParseProfilePath: Entering, lpProfilePath = <\server\bsilo\ntuser.man USERENV(218.1f38) 15:52:48:880 CheckXForestLogon: checking x-forest logon, user handle = 2444 USERENV(218.1f38) 15:52:48:880 CheckXForestLogon: policy set to disable XForest check USERENV(218.1f38) 15:52:48:880 ParseProfilePath: Mandatory profile (.man extension) USERENV(218.1f38) 15:52:49:239 AbleToBypassCSC: Try to bypass CSC USERENV(218.1f38) 15:52:49:239 AbleToBypassCSC: tried NPAddConnection3ForCSCAgent. Error 2109 USERENV(218.1f38) 15:52:49:239 AbleToBypassCSC: Share \server\bsilo mapped to drive E. Returned Path E:\ntuser.man USERENV(218.1f38) 15:52:49:239 ParseProfilePath: CSC bypassed. Profile path E:\ntuser.man USERENV(218.1f38) 15:52:49:255 ParseProfilePath: Tick Count = 0 USERENV(218.1f38) 15:52:49:255 ParseProfilePath: GetFileAttributes found something with attributes <0x2022 USERENV(218.1f38) 15:52:49:255 ParseProfilePath: Found a file USERENV(218.1f38) 15:52:49:255 ReportError: Impersonating user. USERENV(218.1f38) 15:52:49:255 ReportError: Logging Error DETAIL - The system cannot find the path specified. USERENV(218.1f38) 15:52:49:255 GetInterface: Returning rpc binding handle USERENV(218.1f38) 15:52:49:255 ReportError: RPC End point IProfileDialog_9D36D6DD48F0578A2A41B23D7A982E63 USERENV(218.1f38) 15:52:49:255 ReportError: waiting on rpc async event USERENV(1774.2398) 15:52:49:255 ErrorDialogEx: Calling DialogBoxParam USERENV(1774.2398) 15:52:49:270 ErrorDlgProc:: DialogBoxParam USERENV(218.1f38) 15:52:52:177 RpcAsyncCompleteCall finished, status = 0 USERENV(218.1f38) 15:52:52:177 ReleaseInterface: Releasing rpc binding handle USERENV(218.1f38) 15:52:52:177 LoadUserProfile: ParseProfilePath returned FALSE USERENV(218.1f38) 15:52:52:177 CancelCSCBypassedConnection: Cancelling connection of E: USERENV(218.1f38) 15:52:52:177 CancelCSCBypassedConnection: Connection deleted. USERENV(218.1f38) 15:52:52:177 CSyncManager::LeaveLock USERENV(218.1f38) 15:52:52:192 CSyncManager::LeaveLock: Lock released USERENV(218.1f38) 15:52:52:192 CHashTable::HashDelete: S-1-5-21-807756564-1922302612-1565739477-22627 deleted USERENV(218.1f38) 15:52:52:192 CSyncManager::LeaveLock: Lock deleted USERENV(218.1f38) 15:52:52:192 LoadUserProfile: 003 About Reverted back to user <00000000 USERENV(218.1f38) 15:52:52:192 LoadUserProfile: Leaving with a value of 0. USERENV(218.1f38) 15:52:52:192 ========================================================= USERENV(218.1f38) 15:52:52:192 LoadUserProfileI: LoadUserProfileP failed with 3 USERENV(218.1f38) 15:52:52:192 LoadUserProfileI: returning 3 USERENV(1774.d18) 15:52:52:192 LoadUserProfile: Running as self USERENV(1774.d18) 15:52:52:192 LoadUserProfile: Calling LoadUserProfileI failed. err = 3 USERENV(218.200c) 15:52:52:192 IProfileSecurityCallBack: client authenticated. USERENV(218.200c) 15:52:52:192 ReleaseClientContext: Releasing context USERENV(218.200c) 15:52:52:192 ReleaseClientContext_s: Releasing context USERENV(218.200c) 15:52:52:192 MIDL_user_free enter USERENV(1774.d18) 15:52:52:192 ReleaseInterface: Releasing rpc binding handle USERENV(1774.d18) 15:52:52:192 LoadUserProfile: Returning FALSE. Error = 3

  Read the article

• Pinning based on origin of a reprepro repository.

  - by Shtééf

  I'm on Ubuntu 10.04, and trying to set up a repository using reprepro. I'd also like the pin everything in that repository to be preferred over anything else, even if packages are older versions. (It will only contain a select set of packages.) However, I cannot seem to get the pinning to work, and believe it has something to do with the repository side of things, rather than the apt configuration on the client. I've taken the following steps to set up my repository Installed a web server (my personal choice here is Cherokee), Created the directory /var/www/apt/, Created the file conf/distributions, like so: Origin: Shteef Label: Shteef Suite: lucid Version: 10.04 Codename: lucid Architectures: i386 amd64 source Components: main Description: My personal repository Ran reprepro export from the /var/www/apt/ directory. Now on any other machine, I can add this (empty) repository over HTTP to my /etc/apt/sources.list, and run apt-get update without any errors: Ign http://archive.lan lucid Release.gpg Ign http://archive.lan/apt/ lucid/main Translation-en_US Get:1 http://archive.lan lucid Release [2,244B] Ign http://archive.lan lucid/main Packages Ign http://archive.lan lucid/main Sources Ign http://archive.lan lucid/main Packages Ign http://archive.lan lucid/main Sources Hit http://archive.lan lucid/main Packages Hit http://archive.lan lucid/main Sources In my case, now I want to use an old version of Asterisk, namely Asterisk 1.4. I rebuilt the asterisk-1:1.4.21.2~dfsg-3ubuntu2.1 package from Ubuntu 9.04 (with some small changes to fix dependencies) and uploaded it to my repository. At this point I can see the new package in aptitude, but it naturally prefers the newer Asterisk 1.6 currently in the Ubuntu 10.04 repositories. To try and fix that, I have created /etc/apt/preferences.d/personal like so: Package: * Pin: release o=Shteef Pin-Priority: 1000 But when I try to install the asterisk package, it will still prefer the 1.6 version over my own 1.4 version. This is what apt-cache policy asterisk shows: asterisk: Installed: (none) Candidate: 1:1.6.2.5-0ubuntu1 Version table: 1:1.6.2.5-0ubuntu1 0 500 http://nl.archive.ubuntu.com/ubuntu/ lucid/universe Packages 1:1.4.21.2~dfsg-3ubuntu2.1shteef1 0 500 http://archive.lan/apt/ lucid/main Packages Clearly, it is not picking up my pin. In fact, when I run just apt-cache policy, I get the following: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.lan/apt/ lucid/main Packages origin archive.lan 500 http://security.ubuntu.com/ubuntu/ lucid-security/multiverse Packages release v=10.04,o=Ubuntu,a=lucid-security,n=lucid,l=Ubuntu,c=multiverse origin security.ubuntu.com [...] Unlike Ubuntu's repository, apt doesn't seem to pick up a release-line at all for my own repository. I'm suspecting this is the cause why I can't pin on release o=Shteef in my preferences file. But I can't find any noticable difference between my repository's Release files and Ubuntu's that would cause this. Is there a step I've missed or mistake I've made in setting up my repository?

  Read the article

• How to egrep the first character in second column?

  - by Steve

  using egrep, how can i print all lastnames start with K or k ??? Jennifer Cowan:548-834-2348:583 Laurel Ave., Kingsville, TX 83745:10/1/35:58900 Lesley Kirstin:408-456-1234:4 Harvard Square, Boston, MA 02133:4/22/62:52600 Jennifer Cowan:548-834-2348:583 Laurel Ave., kingsville, TX 83745:10/1/35:58900 Lesley kirstin:408-456-1234:4 Harvard Square, Boston, MA 02133:4/22/62:52600 William Kopf:846-836-2837:6937 Ware Road, Milton, PA 93756:9/21/46:43500 Arthur Putie:923-835-8745:23 Wimp Lane, Kensington, DL 38758:8/31/69:126000

  Read the article

• setting apache environment variable

  - by Kiran

  My hosting environment using Server version: Apache/2.2.14 (Unix) and I am modifying ./usr/local/apache/conf/httpd.conf to set environment variable and restarting the server . SetEnv XML-RPC-IPs 193.45.32.21 I did set it as a first entry in the file and restarted the server . But even restarting if I try to print it is still getting me black , Am I missing any thing ? echo "My IP address ".$_SERVER['XML-RPC-IPs']; Thanks for your help Regards Kiran

  Read the article

• Install python-psycopg on Ubuntu 9.10

  - by jack

  How can I install python-psycopg (not python-psycopg2) on Ubuntu 9.10 "apt-get install python-psycopg" returns "Package python-psycopg has no installation candidate" I also downloaded source code at psycopg-1.1.21.tar.gz but didn't found "make" command in the archive.

  Read the article

• setting apache environment variable

  - by Kiran

  Hi , My hosting environment using Server version: Apache/2.2.14 (Unix) and I am modifying ./usr/local/apache/conf/httpd.conf to set environment variable and restarting the server . SetEnv XML-RPC-IPs 193.45.32.21 I did set it as a first entry in the file and restarted the server . But even restarting if I try to print it is still getting me black , Am I missing any thing ? echo "My IP address ".$_SERVER['XML-RPC-IPs']; Thanks for your help Regards Kiran

  Read the article

• access_log item w/out IP. Starts with "::1 - - [<date>]"

  - by Meltemi

  Looking at our Apache log I see normal requests like: 174.133.xxx.xxx - - [20/May/2010:17:36:44 -0700] "GET /index.html HTTP/1.1" 200 2004 but every so often i get a cluster of these w/out an IP address. ::1 - - [20/May/2010:18:47:21 -0700] "OPTIONS * HTTP/1.0" 200 - ::1 - - [20/May/2010:18:47:22 -0700] "OPTIONS * HTTP/1.0" 200 - ::1 - - [20/May/2010:18:47:23 -0700] "OPTIONS * HTTP/1.0" 200 - what do they mean and curious what causes them?

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >