Search Results

Search found 17622 results on 705 pages for 'external drive'.

Page 42/705 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • GRUB2 stuck at rescue console, showing "unknown filesystem" for all partitions

    - by AndiDog
    I installed Ubuntu 12.04 on my external USB drive, where I have a 700GB NTFS partition followed by the new 6GB ext4 partition and a swap partition (all primary). The GRUB MBR is also installed to the external hard disk. Since my BIOS puts the external drive as first disk when booting, I removed my internal hard disk before installation in order to avoid ordering problems. Now when I boot from the external drive, GRUB is stuck at the rescue console with the error "unknown filesystem". grub rescue> ls (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) ls (hd0,<any of them>)/ gives me "unknown filesystem", thus also "insmod normal" GRUB doesn't seem to be able to read my Linux partition as you can see above?! How can I solve this? Additional info: bootinfoscript says (this is with the internal drive in again, but that does not make a difference): Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos2)/boot/grub on this drive. sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info:

    Read the article

  • Booting from e-sata drive

    - by petersohn
    I have a HP EliteBook laptop (don't know exact product number), which has an internal hard drive with Windows installed on it. I have an external hard drive with e-sata and USB ports, linux installed on it. When I try to boot from the external drive, it works if I use USB but not if I use e-sata. In the BIOS setup, I have the following boot order set: External SATA drive USB Hard Drive Notebook Upgrade Bay Notebook Hard Drive etc. When I boot from another drive (such as the internal hard drive or from CD-ROM), and have the e-sata cable connected, it works perfectly. Is there any way to boot from the e-sata drive?

    Read the article

  • HP DL380 G5 Predictive failure of a new drive

    - by CharlieJ
    Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

    Read the article

  • Unable to read USB External HD after aborted back up

    - by Stjepan
    I have two PC laptops. On one of the two PC's (Win 7) I Aborted a back up and ejected the drive. Now that same pc wants to format the drive. I plugged the drive into the other pc (Win XP) and that one reads the drive and all data stored. Why does one want to format the drive and the other does not? .... My apologies for not being clearer with my original question and thanks for the responses, so; The drive is not a flash stick, its an external WD Hard drive plugged in via the USB. The two tips provided did not resolve the issue. Strangely, the pc with win XP can read the drive but the pc that the HD was plugged into when the backup was aborted still wants to format the drive. Stjep

    Read the article

  • Flash CS3/AS3 - How to Mask Nested MovieClips in External Classes

    - by Max Jackson
    I have a number of external class files that make up (or are trying to build) a portfolio. One of the class files for this project is a Menu.as class I tried extends, but I'm yet to use extends to where it doesn't become a ball of tangled holiday cheer. So my main portfolio class (the one where I'm assembling everything) calls an instance of the Menu class. From the Preloader through the Portfolio class into the Menu class is where I'm passing the content because I want to package things properly. This is Menu content, so naturally I want to position it in a properly names spot. I'm trying to reveal this Menu in a mask and I'm getting the old #1009 error. In a trace, this will work: trace(site_mc.menu_mc.mainMask_mc); // returns [object mainMask_mc_4] However, when I try to truncate the string into a single compact_mc... compactMenu_mc = site_mc.menu_mc.mainMask_mc; trace(compact_mc); // it won't trace (#1009). I said to hell with it, but now I need to have one MovieClip mask another. So I figure I can't go all... parent.parent.parent.clip_mc.mask = parent.parent.parent.masked_mc Probably because of datatyping and whatever else. I hate to be vague, but I'm new and have been working like gangbusters for days to get this portfolio up. Any suggestions or pointers on things my noob brain might've missed are given much thanks. :)

    Read the article

  • jQuery + External javascript: How to embed videoplayer in div

    - by Dennis
    I just started with jQuery and so far I have a really good impression of the framework. But now I have a problem that I can't figure out on myself. I want to embed an external javascript file that loads a videoplayer and displays it. If I include the <script>...</script> directly in HTML it loads just fine. But when I try to load it with jQuery it has very different behaviors in several browsers but it doesn't work in a single one. Either the player is not loaded at all or it doesn't update the selected div but reloads the player on a blank page. This is the source: <html> <head> <style type="text/css"> div#test { width: 100%; height: 500px; margin: 10px auto; padding: 5px; border: 1px solid #777; background-color: #fbca93; text-align: center; } </style> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script> <script> $(document).ready(function(){ var video = "<script type=\'text\/javascript\' src=\'http:\/\/www.physicalfitnet.com\/video_syndication\/embed\/jssingle.aspx?vid=651&pub=9DF8233261D101B86368400385B8FF2E\'><\/script>"; $("div#test").html(video); }); </script> </head> <body> <div id="test"> Hi</div> </body> </html> I uploaded everything to http://kernast.de/test ... any help is appreciated. THX

    Read the article

  • smartctl not returning on HBA that's secure-erasing a different drive

    - by Stu2000
    Whenever I run smartctl -i /dev/sd* where * is a drive that is plugged into the same host bus adapter as another drive that is currently being erased with an hdparm secure erase command, the smart command will just 'hang' and not return (blocked) until the erasure of the other drive is finished. To make matters worse you can't cntrl-c out of it. Has anyone else had this issue? Is there another way to retrieve smart data from a drive, which doesn't block? I noticed that I can still use the udevadm command to retrieve the serial and model of the drive which is useful but doesn't appear to have any smart data. Any information relating to this matter is appreciated, especially if you can tell me another way to retrieve the S.M.A.R.T data that might work. Regards, Stuart

    Read the article

  • Disk Error on Boot (Possible boot sector issue)

    - by Choco
    I own a 4-5 year old Dell Dimension E510 with Windows XP: Media Center Edition. I have 2 drives installed: C Drive: Windows XP: Media Center Edition G Drive: 2 partitions: Windows 7 (beta) Windows XP (professional) That is also the order they are connected. The C Drive is my primary drive. When I attempt to boot the computer, the bios loading screen appears normally; the progress bar moves and it's fine. The very next page, however, supposed to be a boot choice. When I installed Windows 7 onto the G Drive in context of the C drive it added a boot selector to the C drive's boot sequence. It gives me the option of booting Windows 7 or Windows XP: Media Center Edition. However, my problem is now this: After the bios screen I previously mentioned, instead of a boot selector, I receive the following error: A disk read error occurred. Press CTRL+ALT+DEL to restart. The drive is spinning up normally. I hear no odd noises/clicks/scraping coming from it, even after disabling the other drive to listen to it carefully. According to me, it's a boot sector issue. I have never experienced this before, but maybe during a recent shutdown, Windows XP: MCE errored out and ruined the boot sector. Dilemma! I don't have the Windows XP: MCE disc, because it was installed by the factory. I have accessed the hidden partition on the drive before (you hit a key combination on the bios screen and it comes up with an interface to fix your drive). However, I don't want to reformat the drive (which is what the interface gives me the option to do). I want to possibly fix the boot sector. How can I achieve that?

    Read the article

  • Installing Ubuntu 12 on SATA III drive

    - by Jared
    I am trying to install Ubuntu 12.04 on a SATA III drive however the installer will not recognize my drive in the guided (dual-boot) install. I have changed the controller from IDE to AHCI to no avail, the install still will only recognize my very small second drive that is plugged into a SATA II port. The thing is, the unguided install sees this drive just fine, I just am not sure enough of what I'm doing to feel safe installing via this method. Is there a fix for this beyond plugging my drive into a SATA II port? I really would like to avoid this because of my terrible cable management skills it would be a huge pain to switch it over.

    Read the article

  • Replace your SKY+ HD Hard drive

    - by BizTalk Visionary
    As there are a number of different unit types there are a number of links provided here: If you wish to upgrade the Amstrad HD Box, please use this guide. How to upgrade the Hard Drive of your Amstrad HD box If you wish to upgrade the Thomson HD Box, please use this guide. How to upgrade the Hard Drive in your Thomson HD Box. If you wish to upgrade the Pace HD Box, please use this guide. How to upgrade the Hard Drive in your Pace HD Box If you wish to upgrade the Samsung HD Box, please use this guide. How to upgrade the Hard Drive in your Samsung HD Box I recommend you use a Hitachi DeskStar 1TB Hard Drive SATAII 7200rpm 16MB Cache

    Read the article

  • Google I/O 2012 - What's Possible with the Google Drive SDK

    Google I/O 2012 - What's Possible with the Google Drive SDK Nicolas Garnier Partners of Google Drive have already implemented a number of extremely compelling applications that use Google Drive for file storage. Implementing on the Google Drive SDK enables developers to distribute the cost of storage, while also removing the pain of reimplementing file management. In this session, we'll take a look at a number of existing Google Drive SDK implementations with popular apps. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 276 6 ratings Time: 56:25 More in Science & Technology

    Read the article

  • Creating an install drive - can not open output file autorun.inf

    - by user226881
    I am trying to make an install/boot drive for a computer that has no operating system and no optical drive. I used the ISO from Ubuntu.com and the burner from pendrivelinux.com. When the program starts writing to the flash drive, there is an error displayed that says : "0 can not open output file E:\autorun.inf" But continues to write data. After it has finished, I remove the drive and insert to the other computer and turn it on, but it never finds a drive to boot from. What is causing this problem and how can I fix it ?

    Read the article

  • Ubuntu not saving files and settings when running from flash drive

    - by user81217
    How can I make Ubuntu run completely off of a flash drive? I have downloaded Ubuntu onto a 4gb flash drive but no changes I make are saved between sessions. I want to be able to run and save everything I do to the flash drive. I don't want it interfering with my hard drive at all. I just want to be able to plug my flash drive in the computer boot Ubuntu, and for it to save my changes. E.g. When I install Google Chrome, when I reboot it isn't there.

    Read the article

  • https://www.googleapis.com/drive/v2/files/<fileid>/comments?alt=json returned "Not Found" on a file that can't be opened

    - by Kartik Ayyar
    More details as below: https://www.googleapis.com/drive/v2/files/1iNMGIAFXuhS_CO_hnEO0_EJ9PAgT-hXYqWYv0MPGUTI/comments?alt=json returned "Not Found The file is present in drive and shows in drive.changes.list, but can't be opened in Google Drive either. There are two problems here a) the file is somehow corrupt ( it was a document imported into drive, so that failed, but that isn't something I care about for the purposes of this question ) b) The file shows up as existing in some API calls, but calls to read comments with the Drive SDK comments API fail. Here are results from an API call showing how the file does indeed exist: "file": { "kind": "drive#file", "id": "1iNMGIAFXuhS_CO_hnEO0_EJ9PAgT-hXYqWYv0MPGUTI", "etag": "\"o35FABD0TC3H-Up3OL3UA9kEB2w/MTM3MTc2NzU5NzEyNA\"", .... .... "iconLink": "https://ssl.gstatic.com/docs/doclist/images/icon_11_document_list.png", "title": "<removed>", "mimeType": "application/vnd.google-apps.document", "labels": { "starred": false, "hidden": false, "trashed": true, "restricted": false, "viewed": true },

    Read the article

  • External HDD incorrectly detected as internal - how change to enable hot swap/eject?

    - by Sam
    Hi All, I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: http://superuser.com/questions/12955/how-do-i-remove-the-option-to-eject-sata-drives-from-the-windows-7-tray-icon

    Read the article

  • External HDD incorrectly detected as internal - how change to enable hot swap/eject?

    - by Sam
    I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: How do I remove the option to eject SATA drives from the Windows 7 tray icon?

    Read the article

  • Zero bytes on home partition

    - by Michael Z
    I decided to replace the hard drive on my machine running Ubuntu 12.04 LTS . After using the new hard drive for a few days, I noticed that the new hard drive has bad sectors. So I decided to plug my old hard drive back in. First, I plugged both hard drives in and copied some data files from the new hard drive to the old one. After unplugging the new hard drive, I booted the computer with the old hard drive, and here I got a surprise: I can see 0 bytes available on my /home partition! The df utility shows that the /home partition has 0 available bytes. I have tried to move some files. But I still has 0 bytes on /home! However, GParted correctly shows that the available size is near 2Gb. UPDATE 1: To my surprise, System Monitor shows me that approximately 2 Gb are free and 0 bytes are available on the /home partition. It's slightly shocked me! Are "free" and "available" not the same? Any help is really appreciated!

    Read the article

  • NASM - Load code from USB Drive

    - by new123456
    Hola, Would any assembly gurus know the argument (register dl) that signifies the first USB drive? I'm working through a couple of NASM tutorials, and would like to get a physical boot (I can get a clean one with qemu). This is the section of code that loads the "kernel" data from disk: loadkernel: mov si, LMSG ;; 'Loading kernel',13,10,0 call prints ;; ex puts() mov dl, 0x00 ;; The disk to load from mov ah, 0x02 ;; Read operation mov al, 0x01 ;; Sectors to read mov ch, 0x00 ;; Track mov cl, 0x02 ;; Sector mov dh, 0x00 ;; Head mov bx, 0x2000 ;; Buffer end mov es, bx mov bx, 0x0000 ;; Buffer start int 0x13 jc loadkernel mov ax, 0x2000 mov ds, ax jmp 0x2000:0x00 If it makes any difference, I'm running a stock Dell Inspiron 15 BIOS. Apparently, the correct value for me is 0x80. The BIOS loads the hard drives and labels them starting at 0x80 according to this answer. My particular BIOS decides to load the USB drive up as the first, for some reason, so I can boot from there.

    Read the article

  • Google Drive API invalid_grant after removing access

    - by Sparafusile
    I have been writing a desktop application that uses the Google Drive API v2. I have the following code: var credential = GoogleWebAuthorizationBroker.AuthorizeAsync ( new ClientSecrets { ClientId = ClientID, ClientSecret = ClientSecret }, new[] { DriveService.Scope.Drive }, "user", CancellationToken.None ) .Result; this.Service = new DriveService( new BaseClientService.Initializer() { HttpClientInitializer = credential, ApplicationName = "My Test App", } ); var request = this.Service.Files.List(); request.Q = "title = 'foo' and trashed = false"; var result = request.Execute(); The first time I ran this code it opened a browser and asked me to grant permissions to the App, which I did. Everything worked successfully until I realized I was using the wrong Google account. At that point I logged into the wrong Google account and revoked access to my App. Now, whenever I run the same code it throws an exception: Error:"invalid_grant", Description:"", Uri:"" When I examine the service and request objects, it looks like the oauth_token isn't getting created any more. I know what I did to mess things up, but I can't figure out how to correct it so I can use a different Google account for testing. What do I need to do?

    Read the article

  • SSD Drive not being recongized in BIOS

    - by chobo2
    Well I bought my first drive Mushkin Chronos 180GB and got it installed in my computer and loaded up. I went to windows 7 and initialized the drive and then I installed "SSDlife Free" and loaded it up and my the SSD drive came up said it was "powered on 3 times"(thought it was odd but then thought maybe some testing???). I then restarted my computer and loaded into Acronis. Went to my SSD drive and make a partition called windows(made a basic logical partition). I then loaded up Norton ghost and wanted to copy my current windows onto the SSD drive on the partition I made found out I could not do it through the recovery disk so I made a backup of my windows drive and wanted to then restore it onto the SSD drive. Came back an hour later when the backup was done. I tried to restore the it on my SSD drive and could not find the partition so I loaded up Acronis again and it did not see it. I then went to the bios and saw only my other hard drive. What I tried Tried uplugging and replugging in both sata and power cables. Tried using the power and sata cable from the working drive and giving it the ones that SSD drive were using. Tried Sata AHCI Mode (Intel ICH9 Southbridge) Tried SATA PORT0-1 NATIVE MODE (Intel ICH9 Southbridge) Nothing worked. Software / hardware Windows 7 ultimate Gigabyte S-Series GA-P35-DS3L Mother board I hope someone has some ideas on why it is not being recognized.

    Read the article

  • Placing Varibles into an external Sheet

    - by Leslie Peer
    Trying to Build an Online D&d program which stores the character info into Tables my problem is the game works just fine while your playing but as soon as you exit game all varibles are lost which means you have to restart from scratch the next time you log on... So this is a Two Fold Question What is the Best type of External Sheet to save it on... and two How to access sheet for saving and Loading Below are Varibles <SCRIPT> Name1="Tabor Bloomfield"; Name2="Sam Wrightfield"; Name3="Gavin Hartfild"; Name4="Gail Quickfoot"; Name5="Robert Gragorian"; Name6="Peter Shain"; Class1="MagicUser"; Class2="Fighter"; Class3="Fighter"; Class4="Thief"; Class5="Cleric"; Class6="Fighter"; Level1=23; Level2=1; Level3=1; Level4=2; Level5=2; Level6=1; Hpts1=145; Hpts2=14; Hpts3=13; Hpts4=8; Hpts5=12; Hpts6=15; Armor1="Robe of Protection +5"; Armor2="Splinted Armor"; Armor3="Chain Armor"; Armor4="Leather Armor"; Armor5="Chain Armor"; Armor6="Splinted Armor"; Ac1a=5; Ac2a=3; Ac3a=3; Ac4a=4; Ac5a=2; Ac6a=3; Armor1b="Ring of Protection +5"; Armor2b="Small Shield"; Armor3b="Small Shield"; Armor4b="Wooden Shield"; Armor5b="Large Shield"; Armor6b="Small Shield"; Ac1b=5; Ac2b=1; Ac3b=1; Ac4b=1; Ac5b=1; Ac6b=1; Str1=21; Str2=16; Str3=14; Str4=13; Str5=14; Str6=13; Int1=19; Int2=11; Int3=12; Int4=13; Int5=14; Int6=13; Wis1=18; Wis2=12; Wis3=14; Wis4=13; Wis5=14; Wis6=12; Dex1=19; Dex2=14; Dex3=13; Dex4=15; Dex5=14; Dex6=12; Con1=19; Con2=15; Con3=16; Con4=13; Con5=12; Con6=10; Chr1=21; Chr2=14; Chr3=13; Chr4=12; Chr5=14; Chr6=13; </SCRIPT> File name ="gamestats" Path="trellian Webpage/droves E and F/gamestats have tryed html Page,Javascript,Creating a serperate table page and putting the varibles into cells...But at a lost on how to arrive at a solution

    Read the article

  • My hard drive seems to be overheating... what should I do?

    - by George Edison
    After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

    Read the article

  • What resolution can the eeePC 1001HA/1101HA handle with an external monitor plugged in?

    - by Marco Demaio
    I would like to buy a new Eee PC 1001HA or 1101HA. I know the max display resolution is: 1024x600 for eeePC 1001 1366x768 for eeePC 1101 But what's the maximum resolution of the graphic board when connecting these two computers to an external LCD monitor? Let's say the external monitor supports a full HD resolution of 1920x1080. Are these eeePC graphic boards able to go up to such resolution? It's really incredible to me how such a useful piece of information is missing everywhere on every ASUS website. EeePCs are very well suited to be connected to external monitor, so I can't believe how difficult is to find out this information. I downloaded the manual, but it's not in there either. So I'm hoping somone has got one and knows the answer.

    Read the article

  • Paused BitLocker encryption because no longer want to encrypt the hard drive - how do I get out of encrypting?

    - by Matthew Nagear
    I'm hoping someone can help. I'm not a techy and can't seem to find the same question already answered. I went to encrypt (using BitLocker) a Buffalo hard drive but after it took about 1 min to reach 0.2% 'encrypted' I decided to pause and eject, thinking this would have ended the encryption process. However, I had already assigned a password to it on the instruction pre the encryption beginning. I've since connected my hard drive again and I'm asked to input the password. If I don't I cannot access the drive. However, if I do, I CAN access the files but straight away the little BitLocker Drive Encryption dialogue box comes up saying Encryption in progress.. which I have the option to Pause. So I hit Pause straight away as I do not want to go through with the encryption. Is there any way I can stop the process and decrypt before encryption is completed? Or am I forever going to need to Pause quickly and eject. I fear that will affect my hard drive longer term. Thanks.

    Read the article

  • Which Ubuntu-like Linux OSs work well on a flash drive?

    - by Evan Kroske
    I want a Linux OS that I can load on a flash drive, but I don't want to relearn an entire operating system. I want to know which tiny Linux installations are most like Ubuntu. For example, I'd like to use the apt-get package manager, the Gedit text editor, and the bash shell. I'd like to use something that's already popular, stable, and highly compatible, but it needs to fit comfortably in one gig of my four-gig flash drive (just the essentials; I'll use the remaining three gigs to store installed programs and files). I have no preference for window managers; I just want something small and fast that works like Ubuntu. What is the most popular Ubuntu-like OS that can be easily run on a thumb drive? Edit: I'm not sure I understand how this works. I don't to use a USB drive as a LiveCD; I want to plug in a USB stick and use the computer as if it was my own. In other words, I want to be able to install programs on the drive on one computer and use them on another. Do any of these OSs let me do that? Please forgive my ignorance.

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >