Search Results

Search found 2908 results on 117 pages for 'semi newbie'.

Page 42/117 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • node-xmpp-bosh error on Ubuntu 11.10

    - by megueloby
    I am newbie in Linux word. I want to implement a bosh server. Because it is hard on Windows platform I decided to deploy it on a Ubuntu virtual machine via vmware. I made installation without problems. I followed the processes on this page. Now I want to test my bosh server with the command sudo bosh or sudo /etc/init.d/bosh start, after typing those I get on the terminal Starting bosh server after, nothing. I looked on the bosh.err file and I see exec: 2: /usr/local/lib/bosh/run-server.js: Permission denied I don? t know why this error with sudo. When I try ls -l /usr/local/lib/bosh/run-server.js it show -rw-r--r-- 1 root root 4889 2012-04-01 18:50 /usr/local/lib/bosh/run-server.js How can I make bosh start?

    Read the article

  • Installing drivers for an ATI 6950

    - by aj.esler
    Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

    Read the article

  • 2D management game [on hold]

    - by Simon Bull
    Very newbie question but I have a game idea in mind. It will be 2d and data centric, like football manager. However I am struggling to find a platform that would suit. I am an experienced line of business developer so am happy to write code, but I would like a platform that does some of the leg work for me so was avoiding OpenGL. I would also like to be able deploy to iOS, android, windows and OS X. What are the options? To be more clear, the game is not a normal platform or shooter type game, so game maker is likely to be way too basic and unity seems a little over the top (though I am not sure if the GUI options would fit?). The majority of the game is more like business screens just displaying data and having buttons to click. Are there options for this type of game (May help to look at football manager)?

    Read the article

  • Inspecting the model in a Rails application

    - by Matt Sherman
    I am learning some Ruby on Rails, and am a newbie. Most of my background is in ASP.net MVC on the back end. As I play with a basic scaffold project, I wonder about this case: you jump into an established Rails project and want to get to know the model. Based on what I have seen so far (again, simple scaffold), the properties for a given class are not immediately revealed. I don't see property accessors on the model classes. I do understand that this is because of the dynamic nature of Ruby and such things are not necessary or even perhaps desirable. Convention over code, I get that. (Am familiar with dynamic concepts, mostly via JS.) But if I am somewhere off in a view, and want to quickly know whether the (eg) Person object has a MiddleName property, how would I find that out? I don't have to go into the migrations, do I?

    Read the article

  • How to set Qwt path to the run-time linker in Xubuntu

    - by Rahul
    I've successfully installed Qwt in Xubuntu 12.04(qmake - make - make install). But now I need to set the Qwt path to run time linker of Xubuntu. In manual it's given like - If you have installed a shared library it's path has to be known to the run-time linker of your operating system. On Linux systems read "man ldconfig" ( or google for it ). Another option is to use the LD_LIBRARY_PATH (on some systems LIBPATH is used instead, on MacOSX it is called DYLD_LIBRARY_PATH) environment variable. But being newbie to Linux environment, I'm not able to proceed further. Please help me with this.

    Read the article

  • Installing drivers for an ATI 6950 in Ubuntu

    - by aj.esler
    Is there any way to get ubuntu to recognise an ATI 6950? I have tried installing the proprietary ATI drivers, but these do not seem to work properly. It seems to screw up the gnome desktop, and starts booting into terminal. I'm somewhat of a linux newbie, so not really sure whats going wrong. I don't want to game on ubuntu, I just want it to recognise my dual monitor setup rather than mirroring the monitors, so any driver that does this is fine by me. It seems like the open source ATI radeon drivers will not support the 6950/6970 for some time, at least until kernel 2.6.38 is released. The card is also flashed with the 6970 firmware, not sure if this is important. I am running a 64 bit version of ubuntu, I installed ubuntu server 10.10, then installed gnome-desktop.

    Read the article

  • How to write PowerShell code part 2 (Using function)

    - by ybbest
    In the last post, I have showed you how to use external configuration file in your PowerShell script. In this post, I will show you how to create PowerShell function and call external PowerShell script.You can download the script here. 1. In the original script, I create the site directly using New-SPSite command. I will refactor it so that I will create a new function to create the site using New-SPSite. The PowerShell function is quite similar to a C# method. You put your function parameters in () and separate each parameter by a comma (,). Then you put your method body in {}. function add ([int] $num1 , [int] $num2){ $total=$num1+$num2 #Return $total $total } 2. The difference is you do not need semi-colon (;) at the end of each statement and when calling the method you do not need comma (,) to separate each parameter. function add ([int] $num1 , [int] $num2){ $total=$num1+$num2 #Return $total $total } #Calling the function [int] $num1=3 [int] $num2=4 $d= add $num1 $num2 Write-Host $d 3. If you like to return anything from the function, you just need to type in the object you like to return, not need to type return .e.g. $ObjectToReturn not return $ObjectToReturn

    Read the article

  • Software licensing template that gives room for restricting usage to certain industries/uses of software/source

    - by BSara
    *Why this question is not a duplicate of the questions specified as such: I did not ask if there was a license that restricted specific uses and I did not ask if I could rewrite every line of any open source project. I asked very specifically: "Does there exist X? If not, can I Y with Z?". As far as I can tell, the two questions that were specified as duplicates do not answer my specific question. Please remove the duplicate status placed on the question. I'm developing some software that I would like to be "semi" open source. I would like to allow for anyone to use my software/source unless they are using the software/source for certain purposes. For example, I don't want to allow usage of the software/source if it is being used to create, distribute, view or otherwise support pornography, illegal purposes, etc. I'm no lawyer and couldn't ever hope to write a license myself nor do I have to time to figure how to best do this. My question is this: Does there exist a freely available license or a template for a license that I can use to license my software under they conditions explained above just like one can use the Creative Commons licenses? If not, am I allowed to just alter one of Creative Commons licenses to meet my needs?

    Read the article

  • More confusion over SEO Cname and 301 redirect

    - by Alasdair
    Previous answers on this topic don't really help me with my query, so any help appreciated for a bit of a newbie. I have a new domain "domain#1.mobi" Its hosted with godaddy and has a cname and forwarding, pointing it to "domain#1.elsewhere.us" It has no content. The content is all hosted on "domain#1.elsewhere.us" which is what Google is now listing in its results. I want Google to ignore that and only list "domain#1.mobi" in its listings. How do I achieve this?

    Read the article

  • MVC, when to separate controllers?

    - by Rodolfo
    I'm starting with MVC and have a newbie question. What would be the logic criteria to define what a controller should encompass? For example, say a website has a 'help' section. In there, there are several options like: 'about us', 'return instructions', 'contact us', 'employment opportunities'. Each would then be accessed like 'mysite.com/help/aboutus', 'mysite.com/help/returns', 'mysite.com/help/contactus', etc. My question is, should I have a 'help' controller that has 'about us', 'returns', 'contact us', 'employment' as actions with their respective view, or should each of those be a different controller-action-view set? What should be the line of reasoning to determine when to separate controllers?

    Read the article

  • 2D XNA Game Engine with a Good Wiki [closed]

    - by gcx
    I'm a newbie game developer. I'm planning to develop a XBOX (with a Kinect to double the fun) game. I've researched some 2D game engines that i can use in my project. After some research I've found IceCream engine and it looks delicious with its Milkshake editor. But I can't seem to find "working" game source examples for that engine and its own website's tutorial is not very sufficent. (If you are familiar with this engine) do you know any community that has helpful resources for this particular engine? If not, which engines do you recommend (that has a great wiki) for a XNA based XBOX - Kinect game?

    Read the article

  • Large enterprise application - clients wish to use duplicate e-mails addresses?

    - by Alex Key
    I'd like to know people's opinions, reactions to clients and technical work arounds (if applicable), to the issue of an enterprise application where a client wishes to use duplicate e-mail addresses? To clarify, when I say duplicate e-mail addresses I mean within the same client system, having multiple users that have the same e-mail address. So not just using generic e-mail addresses but using the e-mail address of another user. e.g. Bob Jenkins: [email protected] James Jeffery: [email protected] Context To give this some further context, in the e-learning sector it is common that although all staff in an organisation must complete e-learning - they may not have their own e-mail address so they choose to use their managers e-mail address. Albeit against good practice in public sites... it's a requirement we've over and over again where an organisation is split between office based staff and perhaps e.g. staff in a warehouse. Where problem lies Mr Steak, good point, the problem lies in password resets and perhaps in situations where semi-personal information could be sent (not confidential enough to worry about the insecurities of email). Perhaps reminders for specific system actions, which would be confusing for the unintended party to see (if perhaps misreading the e-mail's intended recipient) Possible solutions System knowing the difference between a "for the attention of" and direct to the person e-mails, including this in the body text. Using alternative communication such as SMS Simply not having e-mails sent to people who are not the intended recipient. Providing an e-mail service ourselfs (not really viable for a corporate IT dept) Thoughts?

    Read the article

  • Offshoring: does it ever work?

    - by DanSingerman
    I know there has been a fair amount of discussion on here about outsourcing/offshoring, and the general opinion seems to be that at best it is difficult, and at worst it fails. I have direct experience of offshoring myself; a previous company where I was a dev manager wanted to send some development offshore, and we ran a pilot scheme to see how well it would work. Of course it was a complete failure, although it is not completely clear to me whether this was down to the offshore devs being less talented, the process, or other factors (no doubt it was really a combination). I can see as a business how offshoring looks attractive (much lower day rate), but as far as I can see, the only way it could possibly work is if you do exceptionally detailed design up front, with incredibly detailed specifications; and by the time you have invested in producing that, you have probably spent as nearly as much as if you had written the actual code locally (which I think is an instance of No Silver Bullet) So, what I want to know is, does anyone here have any experience of offshoring actually working ever? Especially if there are any success stories of it working in a semi-agile way? I know there are developers here from all over the World; has anyone worked on an offshore project they consider successful?

    Read the article

  • Improving exception handling ?

    - by n00b
    Hello, I am a newbie programmer and I recently started learning about exception handling in Java. I know what try, catch and finally blocks do, but I really need to understand how to use them well and where to handle something in the call stack... I have a project right now that involves I/O and all I'm doing is handling the exception in the lowest possible method in the call stack. I'm sure my exception handling can be improved, so I'm asking you guys how you think of exception handling? How did you guys get good at this and how can I better wrap my head around this idea?

    Read the article

  • How secure is Microsoft 2007's encryption?

    - by ericl42
    I've read some various articles about Microsoft's encryption, and from what I gather, 2007 is secure using all default options due to it using AES, and 2000 and 2003 can be configured secure by changing the default algorithm to AES. I was wondering if anyone else has read any other articles or know of any specific vulnerabilities involved with how they implement the encryption. I would like to be able to tell users that they can use this to send semi sensitive documents as long as they use AES and a strong password. Thanks for the information.

    Read the article

  • best way to quickly share multiple photos without permanently hosting them

    - by dsollen
    I find that I'm often asked to share lots of photos with someone, enough that uploading each one individually to them gets tedious when I would like to drag and drop the whole bunch. I could put them on photobucket, but some of them are semi-private; private enough that I don't want them to be easily found on image hosting sites. Are there any convenient ways of sharing these photos quickly but still being able to remove them from the inter-webs afterwards (without too much hassle)? I have found Yahoo Messenger complete version has great photo sharing options; but not everyone has it and I can't expect people to download it just to see some photos.

    Read the article

  • PC reboots spontaenously: debugging tips

    - by aaron
    I swapped my core 2 duo for a quad core recently, and generally things run fine, but every now and then my computer just restarts. I don't even get a blue screen (Vista 32). Core temp isn't a problem. My thinking is that my power supply is inadequate, but I haven't been able to test that (one idea was to under clock the cpu to see if that helped, but going up in speed was the only simple thing to do in the BIOS) Two cases where I semi-consistanly get problems: - Borderlands windowed after some period of time (and some other games, but Borderlands does it pretty regularly) - watching a video (e.g. quicktime/vlc) and having another video running Another thought is non-cpu heat? Maybe the graphics card? Any thoughts on how to track this down appreciated. Thanks!

    Read the article

  • Interfacing the payment systems

    - by etranger
    Hello all. I'm a complete newbie to using online payment systems for web projects, and can't really think of where to start. Let's assume that web system in question needs to generate some income online, and the business idea/functionality is in place, while organizing cash flow is the only unsolved problem. Points of interest are how the custom developed software interfaces to payment systems, and how the resulting income is available to the owner. I do understand that there are probably hundreds of systems out there, but to be more specific on which of them suit, I'd have to know how they work, and that's where I don't feel like understanding much. Thanks in advance.

    Read the article

  • How do I set up XDMCP access via GDM?

    - by np_hard
    I am a newbie to ubuntu linux, and want to setup xdmcp access, so i can access it from my windows box using xming. part of it is learning exercise also, since i know i could use vnc to directly connect to ubuntu. I modified the gdm's custom.conf file like this [xdmcp] Enable=true but when i launch xlaunch, i see a blank screen, further diagnosing with wireshark, i got that the udp port 177 on the linux box is unreachable so i disabled the firewall on linux box, but still same result. I checked with nmap and there is no service listening on UDP 177 port, the gdnsetup on natty is quite different from the older version, where setting up xdmcp was in UI

    Read the article

  • My new favourite traceflag

    - by Dave Ballantyne
    As we are all aware, there are a number of traceflags.  Some documented, some semi-documented and some completely undocumented.  Here is one that is undocumented that Paul White(b|t) mentioned almost as an aside in one of his excellent blog posts. Much has been written about residual predicates and how a predicate can be pushed into a seek/scan operation.  This is a good thing to happen,  it does save a lot of processing from having to be done.  For the uninitiated though: If we have a simple SELECT statement such as : the process that SQL Server goes through to resolve this is : The index IX_Person_LastName_FirstName_MiddleName is navigated to find the first “Smith” For each “Smith” the middle name is checked for being a null. Two operations!, and the execution plan doesnt fully represent all the work that is being undertaken. As you can see there is only a single seek operation, the work undertaken to resolve the condition “MiddleName is not null” has been pushed into it.  This can be seen in the properties. “Seek predicate” is how the index has been navigated, and “Predicate” is the condition run over every row,  a scan inside a seek!. So the question is:  How many rows have been resolved by the seek and how many by the scan ?  How many rows did the filter remove ? Wouldn’t it be nice if this operation could be split ?  That exactly what traceflag 9130 does. Executing the query: That changes the plan rather dramatically, and should be changing how we think about the index seek itself.  The Filter operator has been added and, unsurprisingly, the condition in this is “MiddleName is not null” So it is now evident that the seek operation found 103 Smiths and 60 of those Smiths had a non-null MiddleName. This traceflag has no place on a production system,  dont even think about it

    Read the article

  • Different graphic cards drivers while booting from external media

    - by goran
    I am booting a certain system of mine with ubuntu 9.10 from external HDD. I am satisfied with the setup and it works fine, however I would like to modify it so that I can choose which graphic card drivers to load during the boot time. Specifically I would like to choose between: nvidia proprietary driver ati proprietary driver generic driver Currently if I am using proprietary drivers then dont boot into X, delete xorg.conf, start gdm and reconfigure the system using jockey (for hardware drivers). What would be the steps to make this (semi-)automatic and avoid restarting X?

    Read the article

  • Are the famous websites handmade? [closed]

    - by Mithun Chuckraverthy
    I'm a newbie in web designing. I always wanted to build a professional quality website by myself. So, I started learning HTML/XHTML and CSS for presentation; and, JavaScript and PHP/MySQL for scripting. I wonder, would the developers of famous websites design them by hand? Or, have they found out any better idea of using softwares? If so, can you tell me what are they? (By the word famous, I mean any websites that are liked by millions of people all over the world. Like: Google, Facebook etc.) Thanks in advance!

    Read the article

  • Which is easier to learn, Zend Framework, CakePHP or CodeIgniter?

    - by Kwame Boame
    I am new to programming but I know HTML, CSS and Jquery. I am a web designer but want to expand my skill to application development with frameworks. Specifically, PHP frameworks. I want to know which of the frameworks mentioned in the question is difficult to master. Also, my friend wants me to learn Ruby on Rails/ Python instead of PHP. What's your best advice for a newbie programmer who is looking to build online software/apps in the near future; say, after 3 months/6 months or a year of study and practice?

    Read the article

  • How to write PowerShell code part 2 (Using function)

    - by ybbest
    In the last post, I have showed you how to use external configuration file in your PowerShell script. In this post, I will show you how to create PowerShell function and call external PowerShell script.You can download the script here. 1. In the original script, I create the site directly using New-SPSite command. I will refactor it so that I will create a new function to create the site using New-SPSite. The PowerShell function is quite similar to a C# method. You put your function parameters in () and separate each parameter by a comma (,). Then you put your method body in {}. function add ([int] $num1 , [int] $num2){ $total=$num1+$num2 #Return $total $total } 2. The difference is you do not need semi-colon (;) at the end of each statement and when calling the method you do not need comma (,) to separate each parameter. function add ([int] $num1 , [int] $num2){ $total=$num1+$num2 #Return $total $total } #Calling the function [int] $num1=3 [int] $num2=4 $d= add $num1 $num2 Write-Host $d 3. If you like to return anything from the function, you just need to type in the object you like to return, not need to type return .e.g. $ObjectToReturn not return $ObjectToReturn

    Read the article

  • Can aynone tell me what exactly 32bit/64bit and x86 and AMD64 have to do with the different choices on the download site of Ubuntu?

    - by Elysium
    SORRY for the newbie question, but I am still learning. I am wondering if x86 simply refers to the intel CPUs and AMD64 simply refers to the AMD CPUs? While....32bit and 64bit to the processor types? I was trying to download the intel 64bit version of the Ubuntu installer, but it wont give the option of x86 and AMD64....only the 32bit and 64bit can be chosen. Does this mean that someone with an Intel CPU and another person with an AMD CPU will download the same install file? (obviously depending on the bit version of their CPUs this might differ....but that's another thing).

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >