Search Results

Search found 2353 results on 95 pages for 'serial communications'.

Page 42/95 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• HP DL 380G7 Raid swap drives

  - by dean

  disks 0 and 1 are raid redundant (OS) and the remaining 6 drives are in raid 5 I believe. i would like to pull out disks 0 and 1 and install new drives to build a new OS. I need to be able to reinsert the old drives and reboot back to the original OS. (swap) I had a serious problem in the past attempting this. does the raid require (look for) the drives based on a serial number or something? just dont want to lose data. thanks

  Read the article

• Software to check configuration and diagnostic of my PC is well configured

  - by aiacet

  Is there a utility, software or program than can check that my PC is well configured? Features I'm looking for: Checks to see if the communications between all the components works correctly Indicates if the OS is working properly Check the RAM and memory paging is configured correctly My system: AMD Phenom II X4 955 Black Box 125W Asus M4A785TD-M EVO Radeon HD5770 1GB GDDR5 Asus CoolerMaster GX 650W G.Skill 2x2GB PC3-12800 1600Mhz-787 4GBECO Western Digital 1TB SATAII 64MB Windows XP 32bit Antivirus and firewall: F-secure

  Read the article

• WPA Connection problem

  - by Renjith G

  hi , I am using hostapd,wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board and my desktop PC, WINDOWS XP SP2) (with OLITEC wireless usb)are fine. But when i configured the WPA type, connection established but it is showing the status in the secuirity dialog box "TKIP - Key Absent" Can any one faced this problem?? /renjith g

  Read the article

• How is the Windows 7 activation going to be?

  - by Donny V

  I really hated the Windows Vista activation system Microsoft had. I hope that Windows 7 is going to go back to the simple serial key like Windows XP. You couldn't even upgrade hardware without Windows Vista bitching. What is the activation system they're using for Windows 7?

  Read the article

• Intel Matrix Storage Manager not showing on Asus P5W DH Deluxe?

  - by Leon

  I have set, under "Main" - "IDE Configuration" - "Configure SATA as" to "Raid" and "Onboard Serial-ATA BootRom" to "Enabled", but upon POST I still do not see the Intel Matrix Storage Manager screen where I can press Ctrl+I to set up my raid? I have the latest BIOS version EDIT: Although I had set the rom to "enabled", I then went and reset the bios settings to default. I then set the bootrom setting to "disabled", restarted and then "enabled" again and it seemed to work.

  Read the article

• Record must end with an empty line - missing changetype (LDIF)

  - by user21463

  I tried putting the following LDIF file in Apache Directory Studio, but it complained that the record must end with an empty line. Do you know why? dn: CN=mitoken-SerialNumber,CN=Schema,CN=Configuration,DC=myorg,DC=com changetype: ntdsSchemaAdd lDAPDisplayName: mitokenSerialNumber adminDisplayName: mitoken-SerialNumber description: Token serial number attributeSyntax: 2.5.5.12 oMSyntax: 64 isMemberOfPartialAttributeSet: FALSE isSingleValued: TRUE searchFlags: 0 objectClass: attributeSchema attributeID: 1.2.840.113556.1.8000.2554.56278.0.46625.19000.45599.15687267.6686356.2.1 schemaIDGUID:: 3U7SiIq9SByhs/i1Z6fEsw==

  Read the article

• Does anyone know how the Windows 7 activation is going to be?

  - by Donny V

  I really hated the Vista activation system Microsoft had. I hope that Win 7 is going to go back to the simple serial key like WinXP. You couldn't even upgrade hardware without Vista bitching. Anyone know what activation system there using for Win7?

  Read the article

• Multiple network connections on a Windows 2008 domain controller (private network for NAS)

  - by Sysadminicus

  I have a Windows 2008 server connecting to an iSCSI target on an OpenSolaris box (yay ZFS!). I'd like to create a private network between the 2 boxes that is totally separate of my Windows domain. What is the best way to configure the additional network adapter on the Windows machine so it doesn't think the new subnet is part of the Windows domain? I want to make sure Windows doesn't magically start spewing active directory communications over the private wire and that it doesn't start poisoning the DNS with IPs from the private network.

  Read the article

• Linux program to convert audio file of fax transmission to image?

  - by bdk

  I have a number of uncompressed audio files recorded off of an analog (POTS) telephone line of fax transmissions. Is there a Linux utility or library I could use to convert these files into images of the fax they contain? I'm not looking to send/receive a fax via a modem, but just to "replay" the communications tones and parse out the fax message.I'm guessing this may not be possible due to duplex issues and not knowing which end of the conversation is sending what,but thought I'd ask to see if anyone knew of something.

  Read the article

• ARM Linux kernel debugging on AT91SAM9261

  - by agg

  I have ported Linux to AT91SAM9261 board, I have compiled my own Bootstrap, Uboot, Kernel and filesystem. Now I want to debug my Linux kernel 2.6.30 using KGDB and GDB. I have host with Ubuntu installed and target (AT91SAM9261) with kernel 2.6.30, I want to debug my Linux kernel 2.6.30 using serial/Ethernet. In KGDB official site they have given KGDB patch for x86, but not for ARM. Is it possible to debug my ARM linux kernel on AT91SAM9261?

  Read the article

• How to set up linux watchdog daemon with Intel 6300esb

  - by ACiD GRiM

  I've been searching for this on Google for sometime now and I have yet to find proper documentation on how to connect the kernel driver for my 6300esb watchdog timer to /dev/watchdog and ensure that watchdog daemon is keeping it alive. I am using RHEL compatible Scientific Linux 6.3 in a KVM virtual machine by the way Below is everything I've tried so far: dmesg|grep 6300 i6300ESB timer: Intel 6300ESB WatchDog Timer Driver v0.04 i6300ESB timer: initialized (0xffffc900008b8000). heartbeat=30 sec (nowayout=0) | ll /dev/watchdog crw-rw----. 1 root root 10, 130 Sep 22 22:25 /dev/watchdog | /etc/watchdog.conf #ping = 172.31.14.1 #ping = 172.26.1.255 #interface = eth0 file = /var/log/messages #change = 1407 # Uncomment to enable test. Setting one of these values to '0' disables it. # These values will hopefully never reboot your machine during normal use # (if your machine is really hung, the loadavg will go much higher than 25) max-load-1 = 24 max-load-5 = 18 max-load-15 = 12 # Note that this is the number of pages! # To get the real size, check how large the pagesize is on your machine. #min-memory = 1 #repair-binary = /usr/sbin/repair #test-binary = #test-timeout = watchdog-device = /dev/watchdog # Defaults compiled into the binary #temperature-device = #max-temperature = 120 # Defaults compiled into the binary #admin = root interval = 10 #logtick = 1 # This greatly decreases the chance that watchdog won't be scheduled before # your machine is really loaded realtime = yes priority = 1 # Check if syslogd is still running by enabling the following line #pidfile = /var/run/syslogd.pid Now maybe I'm not testing it correctly, but I would expecting that stopping the watchdog service would cause the /dev/watchdog to time out after 30 seconds and I should see the host reboot, however this does not happen. Also, here is my config for the KVM vm <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit sl6template or other application using the libvirt API. --> <domain type='kvm'> <name>sl6template</name> <uuid>960d0ac2-2e6a-5efa-87a3-6bb779e15b6a</uuid> <memory unit='KiB'>262144</memory> <currentMemory unit='KiB'>262144</currentMemory> <vcpu placement='static'>1</vcpu> <os> <type arch='x86_64' machine='rhel6.3.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <cpu mode='custom' match='exact'> <model fallback='allow'>Westmere</model> <vendor>Intel</vendor> <feature policy='require' name='tm2'/> <feature policy='require' name='est'/> <feature policy='require' name='vmx'/> <feature policy='require' name='ds'/> <feature policy='require' name='smx'/> <feature policy='require' name='ss'/> <feature policy='require' name='vme'/> <feature policy='require' name='dtes64'/> <feature policy='require' name='rdtscp'/> <feature policy='require' name='ht'/> <feature policy='require' name='dca'/> <feature policy='require' name='pbe'/> <feature policy='require' name='tm'/> <feature policy='require' name='pdcm'/> <feature policy='require' name='pdpe1gb'/> <feature policy='require' name='ds_cpl'/> <feature policy='require' name='pclmuldq'/> <feature policy='require' name='xtpr'/> <feature policy='require' name='acpi'/> <feature policy='require' name='monitor'/> <feature policy='require' name='aes'/> </cpu> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/mnt/data/vms/sl6template.img'/> <target dev='vda' bus='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </disk> <controller type='usb' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/> </controller> <interface type='bridge'> <mac address='52:54:00:44:57:f6'/> <source bridge='br0.2'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='bridge'> <mac address='52:54:00:88:0f:42'/> <source bridge='br1'/> <model type='virtio'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <watchdog model='i6300esb' action='reset'> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </watchdog> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain> Any help is appreciated as the most I've found are patches to kvm and general softdog documentation or IPMI watchdog answers.

  Read the article

• How can I monitor a Smart-UPS 2200 in PRTG?

  - by dasaybz

  This UPS is connected via a serial cable to a server. I am trying to get the temperature readings off of the sensor that is connected to the UPS and get them in PRTG. We were able to do this in the past and then when we changed the server out, we lost the settings. Does anyone have any info that might help? Thanks!!

  Read the article

• Ubuntu 9.10 will not boot

  - by Jim

  After an update yesterday my Dell X300 will only boot to a screen with an option to perform 2 memory tests. If I perform these tests, it will only go back to this same screen, offering a choice of memory test again, 86+ or 86+ serial console 115200. This screen is headed - GNU Grub version 1.97 beta 4. This is a full install on my hard drive. How can I get back to booting normally?

  Read the article

• Putty can't connect to USB modem on Windows 7

  - by IanM

  I'm trying to configure caller id on a USB modem connected to a Windows 7 x32 machine. Hyperterminal isn't available so I downloaded the latest version of Putty and am using the Serial option. I'm using the modem's COM port details from Device Manager (COM5, 115200 baud), but when I open the putty session it just hangs with the cursor at the top left hand corner. Hitting the Enter key does nothing. Any ideas??

  Read the article

• Optiplex can't find SATA III Controller

  - by Joel Rodgers

  I just purchased a HighPoint Rocket 620 Storage controller- Serial ATA-600- 600 MBps (OEM version) and a OWC SSD: For some reason, my Dell Optiplex 755 bios sees this card as a storage device installed in the x1 PCI Express slot, but I can't get it to boot from it. In fact, I don't even see the boot screen as mentioned by the manual. Any help would be greatly appreciated. FYI, I tried every imaginable BIOS setting, including using legacy mode instead of AHCI.

  Read the article

• Raid0 setup - What should 'my computer' say?

  - by superexsl

  Hey, I'm not a hardware person, so maybe someone here could help me. I ordered a PC from Dell that has "Serial ATA Raid 0 "Stripe"(7200RPM)Dual HDD" (2x500gb). However, I've just noticed that there's only one HD of 1TB (which is the default option when ordering). Should I be seeing two HDDs in "My Computer" or does the Raid0 setup simply improve performance rather than have (and display) two individual HDDs? How can I check if my computer does have a 'raid0' setup? Thanks

  Read the article

• SQL Server: Statements vs. Batches vs. Transactions vs. Connections

  - by Sleepless

  My question is simple: What are the differences / similarities / cardinalities between Transactions Batches Connections and Statements in SQL Server? As far as I understand a connection is a single communications channel between a SQL Server instance and a client within which collections of statements grouped as batches are executed. A batch is either implicitly or explicitly mapped to one or several transactions. Is this correct?

  Read the article

• Timout dead connections to Digi PortServer TS16

  - by MT

  We are using Digi portservers for console management of our routers. Basically users telnet to the Digis on ports 2001-2016 (corresponding to the physical serial port they want to connect to). Does anyone know if there is a way to cause the digi to close/release a user's connection after an period of idle time and if possible, where that time can be specified?

  Read the article

• Adding extra storage space to Dell PowerEdge 2900 SQL server

  - by Owl

  Can a 300GB 15K RPM SAS (Serial Attached SCSI) Hard Drive work/be configured if i put it in an extra slot on a server that uses a DELL PERC 6/i Integrated RAID Controller?

  Read the article

• CNAME to another domain fails on some office networks, why?

  - by crashalpha

  Our domain "aspenfasteners.com" is hosted by Volusion. We have CNAME records "find" and "search" which point to site indexing accounts on www.picosearch.com. These addresses fail on SOME private office networks which have their own DNS. We suspect the problem comes from Volusion's own name servers, n2.volusion.com and n3.volusion.com. Volusion support on problems this technical is non-existant. We have tried an NSLOOKUP on find.aspenfasteners.com with level 2 debugging info, and we got the results below. Is it possible that the local DNS is recursing to Volusion's name servers, and that while Volusion DOES return the canonical name, they do NOT resolve the address? Can anybody with expertise in this sort of stuff PLEASE look at the NSLOOKUP below and tell me if we are right, because Volusion is giving me absolutely NO support on this topic. I need proof of where the problem lies. Thanks VERY much! Carlo find.aspenfasteners.com Server: mtl-srm-dbsv-01.fastenerwholesale.com Address: 192.168.0.44 SendRequest(), len 61 HEADER: opcode = QUERY, id = 8, rcode = NOERROR header flags: query, want recursion questions = 1, answers = 0, authority records = 0, additional = 0 QUESTIONS: find.aspenfasteners.com.fastenerwholesale.com, type = A, class = IN ------------ Got answer (138 bytes): HEADER: opcode = QUERY, id = 8, rcode = NXDOMAIN header flags: response, auth. answer, want recursion, recursion avail. questions = 1, answers = 0, authority records = 1, additional = 0 QUESTIONS: find.aspenfasteners.com.fastenerwholesale.com, type = A, class = IN AUTHORITY RECORDS: -> fastenerwholesale.com type = SOA, class = IN, dlen = 46 ttl = 3600 (1 hour) primary name server = mtl-srm-dbsv-01.fastenerwholesale.com responsible mail addr = admin.fastenerwholesale.com serial = 10219 refresh = 900 (15 mins) retry = 600 (10 mins) expire = 86400 (1 day) default TTL = 3600 (1 hour) ------------ SendRequest(), len 41 HEADER: opcode = QUERY, id = 9, rcode = NOERROR header flags: query, want recursion questions = 1, answers = 0, authority records = 0, additional = 0 QUESTIONS: find.aspenfasteners.com, type = A, class = IN ------------ Got answer (141 bytes): HEADER: opcode = QUERY, id = 9, rcode = NXDOMAIN header flags: response, auth. answer questions = 1, answers = 1, authority records = 1, additional = 1 QUESTIONS: find.aspenfasteners.com, type = A, class = IN ANSWERS: -> find.aspenfasteners.com type = CNAME, class = IN, dlen = 17 canonical name = www.picosearch.com ttl = 3600 (1 hour) AUTHORITY RECORDS: -> com type = SOA, class = IN, dlen = 43 ttl = 900 (15 mins) primary name server = ns3.volusion.com responsible mail addr = admin.volusion.com serial = 1 refresh = 900 (15 mins) retry = 600 (10 mins) expire = 86400 (1 day) default TTL = 3600 (1 hour) ADDITIONAL RECORDS: -> ns3.volusion.com type = A, class = IN, dlen = 4 internet address = 65.61.137.154 ttl = 900 (15 mins) * mtl-srm-dbsv-01.fastenerwholesale.com can't find find.aspenfasteners.com: Non-existent domain

  Read the article

• Bypassing "Found New Hardware Wizard" / Setting Windows to Install Drivers Automatically

  - by Synetech inc.

  Hi, My motherboard finally died after the better part of a decade, so I bought a used system. I put my old hard-drive and sound-card in the new system, and connected my old keyboard and mouse (the rest of the components—CPU, RAM, mobo, video card—are from the new system). I knew beforehand that it would be a challenge to get Windows to boot and install drivers for the new hardware (particularly since the foundational components are new), but I am completely unable to even attempt to get through the work of installing drivers for things like the video card because the keyboard and mouse won't work (they do work, in the BIOS screen, in DOS mode, in Windows 7, in XP's boot menu, etc., just not in Windows XP itself). Whenever I try to boot XP (in normal or safe mode), I get a bunch of balloons popping up for all the new hardware detected, and a New Hardware Found Wizard for Processor (obviously it has to install drivers for the lowest-level components on up). Unfortunately I cannot click Next since the keyboard and mouse won't work yet because the motherboard drivers (for the PS/2 or USB ports) are not yet installed. I even tried a serial mouse, but to no avail—again, it does work in DOS, 7, etc., but not XP because it doesn't have the serial port driver installed. I tried mounting the SOFTWARE and SYSTEM hives under Windows 7 in order to manually set the "unsigned drivers warning" to ignore (using both of the driver-signing policy settings that I found references to). That didn't work; I still get the wizard. They are not even fancy, proprietary, third-party, or unsigned drivers. They are drivers that come with Windows—as the drivers for CPU, RAM, IDE controller, etc. tend to be. And the keyboard and mouse drivers are the generic ones at that (but like I said, those are irrelevant since the drivers for the ports that they are connected to are not yet installed). Obviously at some point in time over the past several years, a setting got changed to make Windows always prompt me when it detects new hardware. (It was also configured to show the Shutdown Event Tracker on abnormal shutdowns, so I had to turn that off so that I could even see the desktop.) Oh, and I tried deleting all of the PNF files so that they get regenerated, but that too did not help. Does anyone know how I can reset Windows to at least try to automatically install drivers for new hardware before prompting me if it fails? Conversely, does anyone know how exactly one turns off automatic driver installation (and prompt with the wizard)? Thanks a lot.

  Read the article

• Win server 2008 change port of RD Gateway

  - by Mel

  Is it possible to change the port used by RD Gateway. I know its integrated with IIS and it uses port 443 (SSL) so i've changed my IIS bindings to use a different port for SSL communications. however, I can't find any way to specify the RD gateway port in the RD client. Has anyone ever done this before? Reason I'm asking is, my ISP just recently blocked port 80 and 443 so I am forced to use another port.

  Read the article

• Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

  Read the article

• Connect Cisco SBCS with Nortel BCM (H.323)

  - by D4

  Hi, I am wondering if its possible to connect a Cisco Unified Communications 500 (at a branch office) to Our main Site´s Nortel BCM as a remote Gateway for VOIP Comunication... I´ve had a little experience with branch office telephony but only with Nortel Techonology. don´t know if the Cisco SBCS will play along the other kids. :P thanks in advance... Any thought is more than welcome..

  Read the article

• DNS: Forward domain to another host

  - by normmcgarry

  I was hoping some expert on here could quickly answer my question. I don't know much about DNS, so bare with me. I have a domain that is hosted with XO Communications. I want to host that domain at another web host, but I want to keep the mail at XO, so I'd like to keep the DNS managed by XO. What do I need to do in the DNS to switch it the website to the other host, but leave the mail unchanged? Thank you so much.

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >